Bacterial community composition and function in sewage treatment systems

Variation of microbiological parameters within planted soil filter for domestic wastewater treatment

Microbial community structure was assessed in a horizontal subsurface flow planted sand filter treating domestic wastewater with molecular and culture-based methods. The diversity and spatial distribution of the microbial community was investigated using a PCR-DGGE (eubacterial and archaeal primers, ammonia-oxidizing bacteria, and ammonium monooxygenase specific primers), and spread plate and MPN counts. Significant differences were found in the spatial distribution of the microbial community structure. Data analysis revealed that different components of the microbial community possessed different spatial distribution patterns within the filter bed and depending on community type, relationships with soil chemical, and microbiological parameters varied. The most important spatial pattern in microbial community structure within the constructed wetland was related to the depth gradient, followed by differences between inflow and outflow. A comparison of a number of heterotrophic bacteria between inlet and outlet pipes as well as between two sampling depths showed no significant differences. In addition, the variation of the abundance of ammonia-oxidizing bacteria demonstrated no clear spatial pattern.

A survey of the composition and diversity of bacterial populations in bleached kraft pulp-mill wastewater secondary treatment systems

Bacterial community compositions from 10 pulp- and paper-mill treatment systems were compared using both traditional and molecular techniques. 16S-RFLP (Random Fragment Length Polymorphisms) analysis was used to examine the genotypic profiles of the whole bacterial community of each treatment system. Although all the communities shared approximately 60% of their DNA band pattern, as determined by computer-assisted cluster analysis, each community displayed a unique profile that was stable over time under normal operating parameters. Reverse Sample Genome Probing (RSGP) and 16S-RFLP were used to compare the culturable bacterial communities of several geographically separated pulp-mill biotreatment system communities. There was little overlap in the composition of the culturable community between mills at the genus level. Furthermore, RSGP variation was almost as high within a mill as between mills. Partial sequences of the 16S rRNA genes from culturable isolates identified Bacillus spp., Pseudomonas spp., and Xanthobacter as some of the dominant species. Finally, several 16S rRNA genes from two whole community 16S RNA gene libraries were partially sequenced and identified as similar to unknown α-, β-, and γ-Proteobacteria, Ralstonia, Alcaligenes, Nitrospira, Firmicutes, and clones representing the new Holophaga/Acidobacterium phylum. These findings suggest that although these pulp- and paper-mill biotreatment communities perform similar functions, they are populated by unique mixtures of species.Key words: biodiversity, 16S-RFLP, secondary treatment, pulp mills.

Removal of carbonaceous and nitrogenous pollutants from a synthetic wastewater using a membrane-coupled bioreactor

Two modified Ludzack-Ettinger (MLE)-type membrane-coupled bioreactors (MBRs) were investigated in this study for the purpose of removing both nitrogenous and carbonaceous pollutants from a synthetic wastewater. During the first MBR experiment, removal efficiencies were high (>90%) for chemical oxygen demand (COD) and ammonia, but total nitrogenous pollutant removal efficiency was poor (approximately 25%). Bacterial community analysis of ammonia oxidizing bacteria (AOB) by a nested PCR-DGGE approach detected two Nitrosomonas-like populations and one Nitrosospira-like population. During the initial portion of the second MBR experiment, COD and ammonia removal efficiencies were similar to the first MBR experiment until the COD of the influent wastewater was increased to provide additional electron donors to support denitrification. Total nitrogen removal efficiencies eventually exceeded 90%, with a hydraulic residence time (HRT) of 24 h and a recirculation ratio of 8. When the HRT of the MBR experiment was decreased to 12 h, however, ammonia removal efficiency was adversely affected. A subsequent increase in the HRT to 18 h helped improve removal efficiencies for both ammonia (>85%) and total nitrogenous compounds (approximately 70%). Our research demonstrates that MBRs can be effectively designed to remove both carbonaceous and nitrogenous pollutants. The ability of the microbial community to switch between anoxic (denitrifying) and oxic (nitrifying) conditions, however, represents a critical process constraint for the application of MLE-type MBR systems, such that little benefit is gained compared to conventional designs.

Are some putative glycogen accumulating organisms (GAO) in anaerobic : aerobic activated sludge systems members of the α-Proteobacteria?

Activated sludge plants designed to remove phosphorus microbiologically often perform unreliably. One suggestion is that the polyphosphate-accumulating organisms (PAO) are out-competed for substrates by another group of bacteria, the glycogen-accumulating organisms (GAO) in the anaerobic zones of these processes. This study used fluorescence in situ hybridization (FISH) and denaturing gradient gel electrophoresis (DGGE) to analyse the communities from laboratory-scale anaerobic : aerobic sequencing batch reactors. Members of the genus Sphingomonas in the α-Proteobacteria were present in large numbers in communities with poor phosphorus removal capacity where the biomass had a high glycogen content. Their ability to store poly-β-hydroxyalkanoates anaerobically, but not aerobically, and not accumulate polyphosphate aerobically is consistent with these organisms behaving as GAO there. No evidence was found to support an important role for the γ-Proteobacteria as possible GAO in these communities, although these bacterial populations have been considered in other studies to act as possible competitors for the PAO.

Micromanipulation and further identification of FISH-labelled microcolonies of a dominant denitrifying bacterium in activated sludge

The activated sludge process relies on the formation of strong microbial flocs. The knowledge about dominant floc-forming bacteria is at present very limited, especially from a phylogenetic perspective. In this study, numerous microcolonies in the activated sludge flocs were found to be targeted by a Betaproteobacteria-group-specific oligonucleotide probe using fluorescence in situ hybridization (FISH). Some of these were micromanipulated and further identified by reverse transcriptase polymerase chain reaction (RT-PCR) and sequencing to belong to the Aquaspirillum genus in the Neisseriaceae family. A specific oligonucleotide probe, Aqs997, was designed to target the identified bacteria. A survey in nine different wastewater treatment plants with nutrient removal (WWTP) showed a high abundance of bacteria hybridizing to the oligonucleotide probe developed. Microautoradiography (MAR) combined with FISH on activated sludge incubated with radiolabelled substrate showed uptake of substrate with oxygen, nitrate and nitrite as electron acceptor demonstrating a denitrifying potential of the bacteria investigated. The Aquaspirillum-related bacteria seemed to be abundant denitrifiers in WWTPs with nitrogen removal and they were particularly numerous in plants mainly receiving domestic wastewater, where they constituted up to 30% of all bacteria.

Parameters affecting biological phosphate removal from wastewaters

This paper reviews some of the key wastewater composition parameters, which influence the biological removal of phosphate from wastewaters, such as COD content, volatile fatty acid (VFA) content, cation concentration, phosphorus load, pH and food to microorganism ratio. The discussion also focuses on operational parameters affecting successful nutrient removal in wastewater treatment plants, such as temperature, sludge quality, sludge settlement, dissolved oxygen (DO) concentration, anaerobic P-release and secondary P-release. The aim of this review is to compile an updated document for researchers and operators of biological nutrient removal (BNR) systems. In addition, the article will provide a good foundation for readers with no prior knowledge of the process.

The isotope array, a new tool that employs substrate-mediated labeling of rRNA for determination of microbial community structure and function

A new microarray method, the isotope array approach, for identifying microorganisms which consume a (14)C-labeled substrate within complex microbial communities was developed. Experiments were performed with a small microarray consisting of oligonucleotide probes targeting the 16S rRNA of ammonia-oxidizing bacteria (AOB). Total RNA was extracted from a pure culture of Nitrosomonas eutropha grown in the presence of [(14)C]bicarbonate. After fluorescence labeling of the RNA and microarray hybridization, scanning of all probe spots for fluorescence and radioactivity revealed that specific signals were obtained and that the incorporation of (14)C into rRNA could be detected unambiguously. Subsequently, we were able to demonstrate the suitability of the isotope array approach for monitoring community composition and CO(2) fixation activity of AOB in two nitrifying activated-sludge samples which were incubated with [(14)C]bicarbonate for up to 26 h. AOB community structure in the activated-sludge samples, as predicted by the microarray hybridization pattern, was confirmed by quantitative fluorescence in situ hybridization (FISH) and comparative amoA sequence analyses. CO(2) fixation activities of the AOB populations within the complex activated-sludge communities were detectable on the microarray by (14)C incorporation and were confirmed independently by combining FISH and microautoradiography. AOB rRNA from activated sludge incubated with radioactive bicarbonate in the presence of allylthiourea as an inhibitor of AOB activity showed no incorporation of (14)C and thus was not detectable on the radioactivity scans of the microarray. These results suggest that the isotope array can be used in a PCR-independent manner to exploit the high parallelism and discriminatory power of microarrays for the direct identification of microorganisms which consume a specific substrate in the environment.

Ottowia thiooxydans gen. nov., sp. nov., a novel facultatively anaerobic, N2O-producing bacterium isolated from activated sludge, and transfer of Aquaspirillum gracile to Hylemonella gracilis gen. nov., comb. nov

Strain K11Twas isolated from activated sludge of a municipal wastewater-treatment plant. Phylogenetic analysis of the 16S rRNA gene sequence revealed that it represents a distinct line of descent within theComamonadaceae. The novel strain was a Gram-negative, catalase- and oxidase-positive, non-motile, straight to slightly curved rod. Polyhydroxyalkanoate granules were stored intracellularly as reserve material. Colonies on agar plates were small, regular and characterized by a water-insoluble yellow pigment. Unbranched fatty acids 16 : 1ω7c, 16 : 0 and 18 : 1ω7cdominated the cellular fatty acid pattern and ubiquinone-8 (Q-8) was the major component of the respiratory lipoquinones, both traits typical of members of theComamonadaceae. A distinguishing characteristic was the presence of the two hydroxy fatty acids 10 : 0 3-OH and 12 : 0 2-OH, each in significant amounts. The G+C content of the DNA was 59 mol%. Strain K11Twas capable of aerobic chemolithoheterotrophic growth using thiosulfate as an additional substrate, but could not grow autotrophically with thiosulfate or hydrogen. Facultative anaerobic growth was possible with nitrate and nitrite as electron acceptors, but not with ferric iron, sulfate or by fermentation. The sole end product of denitrification was N2O; nitrite accumulated only transiently in small amounts. Based upon phylogenetic and phenotypic evidence, it is proposed to establish the novel taxonOttowia thiooxydansgen. nov., sp. nov., represented by the type strain K11T(=DSM 14619T=JCM 11629T).Aquaspirillum gracilewas among the phylogenetically most closely related species to strain K11T. This species has been wrongly classified, and it is proposed to reclassify it asHylemonella gracilisgen. nov., comb. nov. The type strain is ATCC 19624T(=DSM 9158T).

Molecular evidence for novel planctomycete diversity in a municipal wastewater treatment plant

We examined anoxic and aerobic basins and an anaerobic digestor of a municipal wastewater treatment plant for the presence of novel planctomycete-like diversity. Three 16S rRNA gene libraries were constructed by using a 16S rRNA-targeted universal reverse primer and a forward PCR primer specific for Planctomyces: Phylogenetic analysis of 234 16S rRNA gene sequences defined 110 operational taxonomic units. The majority of these sequences clustered with the four known genera, Pirellula (32%), Planctomyces (18.4%), Gemmata (3.8%), and Isosphaera (0.4%). More interestingly, 42.3% of the sequences appeared to define two distantly separated monophyletic groups. The first group, represented by 35.5% of the sequences, was related to the Planctomyces group and branched as a monophyletic cluster. It exhibited between 11.9 and 20.3% 16S rRNA gene sequence dissimilarity in comparisons with cultivated planctomycetes. The second group, represented by 6.8% of the sequences, was deeply rooted within the Planctomycetales tree. It was distantly related to the anammox sequences (level of dissimilarity, 20.3 to 24.4%) and was a monophyletic cluster. The retrieved sequences extended the intralineage phylogenetic depth of the Plantomycetales from 23 to 30.6%. The lineages described here may have a broad diversity of undiscovered biochemical and metabolic novelty. We developed a new 16S rRNA-targeted oligonucleotide probe and localized members of one of the phylogenetic groups using the fluorescent in situ hybridization technique. Our results indicate that activated sludge contains very diverse representatives of this group, which grow under aerobic and anoxic conditions and even under anaerobic conditions. The majority of species in this group remain poorly characterized.

Fluorescence in situ hybridisation for the identification and characterisation of prokaryotes

Fluorescence in situ hybridisation with rRNA-targeted nucleic acid probes can be used to directly identify microorganisms within complex samples in a few hours and therefore has widespread application in environmental and medical microbiology. The past year has seen significant methodological improvements in fluorescence in situ hybridisation, as well as in the combination of this method with other techniques for inferring functional traits of microorganisms within their environment.