Aggregation-induced emission of 1-methyl-1,2,3,4,5-pentaphenylsilole

Preparation of AIEgen-based near-infrared afterglow luminescence nanoprobes for tumor imaging and image-guided tumor resection

Fluorescence imaging represents a vital tool in modern biology, oncology and biomedical applications. Afterglow luminescence (AGL), which circumvents the light scattering and tissue autofluorescence interference associated with real-time excitation source, shows remarkably increased imaging sensitivity and depth. Here we present a protocol for the design and synthesis of AGL nanoprobes with an aggregation-induced emission (AIE) effect to simultaneously red shift and amplify the afterglow signal for tumor imaging and image-guided tumor resection. The nanoprobe (AGL AIE dot) is composed of an enol ether format of Schaap's agent and a near-infrared AIE fluorogen (AIEgen) (tetraphenylethylene-phenyl-dicyanomethylene-4H-chromene, TPE-Ph-DCM) to suppress the nonradiative dissipation pathway. Pre-irradiating AGL AIE dots with white light could generate singlet oxygen to convert Schaap's agent to its 1,2-dioxetane format, thus initializing the AGL process. With the aid of AIEgen, the AGL shows simultaneously red shifted emission maximum (from ~540 nm to ~625 nm) and enhanced intensity (by 3.2-fold), facilitating better signal-to-background ratio, imaging sensitivity and depth. Intriguingly, the activated AGL can last for over 10 days. Compared with conventional approaches, our method provides a new solution to concurrently red shift and amplify afterglow signals for better in vivo imaging outcomes. The preparation of AGL AIE dots takes ~2 days, the in vitro characterization takes ~10 days (less than 1 day if not involving afterglow kinetic profile study) and the tumor imaging and image-guided tumor resection takes ~7 days. These procedures can be easily reproduced and amended after standard laboratory training in chemical synthesis and animal handling.

Multi-Stimuli-Responsive Fluorescent Molecule with AIE and TICT Properties Based on 1,8-Naphthalimide

A multi-stimuli responsive fluorophore, named NBDNI, was developed by constructing a 1,8-naphthalimide derivative in which a rotatable electron-donating N,N-dimethylaniline group attached to its 4-position. This molecular structure endowed NBDNI with aggregate-induced emission (AIE) and twisted intramolecular charge transfer (TICT) properties, enabling remarkable fluorescence changes in response to multiple external stimuli: (i) sensitivity to polarity in various solvent systems and polymer matrix; (ii) significant fluorescence response and excellent linearity towards temperature changes in solution; (iii) distinct switch of fluorescence color upon acid and base treatments; (iv) reversible mechanochromism behavior in the solid state. Moreover, the mechanisms underlying the aforementioned stimuli-responsive phenomena have been proposed based on comprehensive systematic measurements. Furthermore, preliminary applications such as fluorescence thermometry and acid/base test paper have been demonstrated. This research will bring about new opportunities for the development of novel stimuli-responsive luminescent materials.

A Near-Infrared-II Excitable Pyridinium Probe with 1000-Fold ON/OFF Ratio for γ-Glutamyltranspeptidase and Cancer Detection

Activity-based detection of γ-Glutamyltranspeptidase (GGT) using near-infrared (NIR) fluorescent probes is a promising strategy for early cancer diagnosis. Although NIR pyridinium probes show high performance in biochemical analysis, the aggregation of both the probes and parental fluorochromes in biological environments is prone to result in a low signal-to-noise ratio (SBR), thus affecting their clinical applications. Here, we develop a GGT-activatable aggregate probe called OTBP-G for two-photon fluorescence imaging in various biological environments under 1040 nm excitation. By rationally tunning the hydrophilicity and donor-acceptor strength, we enable a synergistic effect between twisted intramolecular charge transfer and intersystem crossing processes and realize a perfect dark state for OTBP-G before activation. After the enzymatic reaction, the parental fluorochrome exhibits bright aggregation-induced emission peaking at 670 nm. The fluorochrome-to-probe transformation can induce 1000-fold fluorescence ON/OFF ratio, realizing in vitro GGT detection with an SBR > 900. Activation of OTBP-G occurs within 1 min in vivo, showing an SBR > 400 in mouse ear blood vessels. OTBP-G can further enable the early detection of pulmonary metastasis in breast cancer by topically spraying, outperforming the clinical standard hematoxylin and eosin staining. We anticipate that the in-depth study of OTBP-G can prompt the development of early cancer diagnosis and tumor-related physiological research. Moreover, this work highlights the crucial role of hydrophilicity and donor-acceptor strength in maximizing the ON/OFF ratio of the TICT probes and showcases the potential of OTBP as a versatile platform for activity-based sensing.

Mechanical Bond Induced Enhancement and Purification of Pyrene Emission in the Solid State

To address key concerns on solid-state pyrene-based luminescent materials, we propose a novel and efficient mechanical bond strategy. This strategy results in a transformation from ACQ to AIE effect and a remarkable enhancement of pyrene emission in the solid state. Moreover, an unusual purification of emission is also achieved. Through computational calculation and experimental characterisation, finally determined by X-ray diffraction analysis, we prove that the excellent emissions result from mechanical bond induced refinement of molecular arrangements, including reduced π-π stacking, well-ordered packing and enhanced structural stability. This work demonstrates the potential of mechanical bond in the field of organic luminescent molecules, providing a new avenue for developing high-performance organic luminescent materials.

Preparation and Application of a Sulfur-Doped Fluorescent Carbon Dots with Aggregation-Induced Emission Character

As a new type of zero-dimensional nanomaterial, carbon dots are widely applied in various fields. However, most of the carbon dots have aggregation fluorescence quenching properties, which limited their practical applications. In this study, a novel sulfur-doped carbon dots (S-CDs) was prepared by solvothermal method. The properties of the S-CDs in ethanol solution and in solid state were investigated respectively. The results showed that the S-CDs have an excited wavelength dependent emission of blue fluorescence in ethanol solution, and have orange fluorescence emission in solid state and composite films, indicating the prepared S-CDs has aggregation-induced emission (AIE) performance. The main reason was that the presence of S-S bonds and the intramolecular rotation of aromatic rings were limited in solid state, resulting in its emission of orange fluorescence. Furthermore, the S-CDs could be applied to identify fingerprints, anti-counterfeiting.

AIE-ESIPT Photoluminescent Probe Based on 3-(3-Hydroxypyridin-2-yl)isoquinolin-4-ol for the Detection of Intracellular Hydrogen Peroxide

Excited-state intramolecular proton transfer (ESIPT) molecules, which feature large Stokes shifts to avoid self-absorption, play an essential role in photoluminescent bioimaging probes. Herein, we report the development of an ESIPT molecule 3-(3-hydroxypyridin-2-yl)isoquinolin-4-ol (PiQ). PiQ not only undergoes a distinct ESIPT process unlike the symmetrical 2,2'-bipyridyl-3,3'-diol but also exhibits aggregation-induced emission (AIE) characteristics. PiQ self-assembles into aggregates with an average size of 241.0±51.9 nm in aqueous solutions, leading to significantly enhanced photoluminescence. On the basis of the ESIPT and AIE characteristics of PiQ, the latter is functionalized with a hydrogen peroxide-responsive 4-pinacoratoborylbenzyl group (B) and a carboxylesterase-responsive acetyl group (A) to produce a photoluminescent probe B-PiQ-A. The potential of PiQ for applications in bioimaging and chemical sensing is underscored by its efficient detection of both endogenous and exogenous hydrogen peroxide in living cells.

[Ag(IPr)(bpy)][PF6]: brightness and darkness playing with aggregation induced phosphorescence for light-emitting electrochemical cells

Heteroleptic silver(I) complexes have recently started to attract attention in thin-film lighting technologies as an alternative to copper(I) analogues due to the lack of flattening distortion upon excitation. However, the interpretation of their photophysical behavior is challenging going from traditional fluorescence/phosphorescence to a temperature-dependent dual emission mechanism and ligand-lock assisted thermally activated delayed fluorescence. Herein, we unveil the photoluminescence behavior of a three-coordinated Ag(I) complex with the N-heterocyclic carbene (NHC) ligand and 2,2'-bipyridine (bpy) as the N^N ligand. In contrast to its low-emissive Cu(I) complex structural analogues, a strong greenish emission was attributed to the presence of aggregates formed by π-π intermolecular interactions as revealed by the X-ray structure and aggregation induced emission (AIE) studies in solution. In addition, the temperature-dependent time-resolved spectroscopic and computational studies demonstrated that the emission mechanism is related to a phosphorescence emission mechanism of two very close lying (ΔE = 0.08 eV) excited triplet states, exhibiting a similar delocalized nature over the bipyridine ligands. Unfortunately, this favourable AIE is lost upon forming homogeneous thin films suitable for lighting devices. Though the films showed very poor emission, the electrochemical stability under device operation conditions is remarkable compared to the prior-art, highlighting the potential of [Ag(NHC)(N^N)][X] complexes in thin-film lighting.

Preparation of Langmuir-Blodgett Films from Quinoxalines Exhibiting Aggregation-Induced Emission and Their Acidochromism

The development of aggregation-induced emission (AIE)-exhibiting compounds heavily relies on our evolving comprehension of their behavior at interfaces, an understanding that still remains notably limited. In this study, we explored the preparation of two-dimensional (2D) sensing films from 2,3-diphenylquinoxaline-based diazapolyoxa- and polyazamacrocycles displaying AIE via the Langmuir-Blodgett (LB) technique. This systematic investigation highlights the key role of the heteroatom-containing tether of 2,3-diphenylquinoxalines in the successful fabrication of Langmuir layers at the air-water interface and the transfer of AIE-emitting supramolecular aggregates onto solid supports. Using both diazapolyoxa- and polyazamacrocycles, we prepared AIE-exhibiting monolayer films containing emissive supramolecular aggregates on silica, mica, and quartz glass and characterized them using ultraviolet-visible (UV-vis) and photoluminescence (PL) spectroscopies, atomic force microscopy (AFM) imaging, and fluorescence microscopy. We also obtained multilayer AIE-emitting films through the LB technique, albeit with increased complexity. Remarkably, by employing the smallest macrocycle N2C3Q, we successfully prepared LB films suitable for the visual detection of acidic vapors. This sensing material, which contains a much lesser amount of organic dye compared with traditional drop-cast films, can be regenerated and utilized for real-life sample analysis, such as monitoring the presence of ammonia in the air and the freshness of meat.

Toward High Contrast and Noninvasive Fluorescence Switches via an O-Fused Ring 5,7-Dihydroxy-4-methyl-2,2,3-triphenylbenzofuran-6(2H)-one Strategy

An unprecedented O-fused ring 5,7-dihydroxy-4-methyl-2,2,3-triphenylbenzofuran-6(2H)-one (3) was first time synthesized. Further, a series of novel dialkyl/fluoroalkyl derivatives of compound 3, 5,7-dialkoxy/fluoroalkoxy-4-methyl-2,2,3-triphenylbenzofuran-6(2H)-one, were obtained with noninvasive fluorescence switching characteristics and aggregation-induced emission properties. Compared with fluoroalkyl derivatives, the alkyl analogs exhibited a significant bathochromic shift in solid-state fluorescence emission. Notably, these noninvasive fluorescent molecular switches could be facilely tuned through light and heat stimulation, which successfully achieved high contrast and reversible fluorescent emission between orange and yellow endowing them with potential applications in data encryption materials. In addition, the single crystal data of compounds 3 and 7-CF3 displayed weak intermolecular interactions in different directions, resulting in twisted conformation and antiparallel slip stacking. Interestingly, the polymer dimethyl silicone film doped with 7-C3F7 also showed an evident light-responsive behavior, meeting the criterion for fluorescent materials in the optical field.

Unique Fluorescence of Aggregation-Induced Emission Luminogens on Solid Surfaces Modified by Silicone Nanofilaments

Aggregation-induced emission (AIE) has revolutionized solid-state fluorescence by overcoming the limitations of aggregation-caused quenching. While extensively studied in solutions, AIE's potential on solid surfaces remains largely unexplored, which can be fundamentally interesting and practically useful. In this work, we demonstrate the successful dispersion of tetraphenylethylene (TPE), one of the most classical AIE luminogens, on solid surfaces coated with silicone nanofilaments (SNF). The high surface area of SNF enables the uniform immobilization of TPE luminogens, replicating their dispersal behavior in solutions. Compared to unmodified surfaces, TPE dispersed on SNF-coated surfaces exhibits significantly enhanced fluorescence intensity. Moreover, a fascinating dynamic blue shift in TPE emission on SNF-coated surfaces is observed, with the velocity controllable by the surface group of SNF by up to 4 orders of magnitude, showing that TPE can be applied to the judgment of the nanoscale morphology and surface free energy of the solid surface. Owing to the superhydrophobicity and self-cleaning properties of SNF, the on-surface fluorescence can be sustained underwater and is resistant to dust contamination and rain erosion, with potential applications of information encryption presented. Our approach of uniformly dispersing AIE luminogens on nanomaterials with high surface areas provides a general methodology for creating on-surface fluorescence and saving the usage of expensive AIE luminogens in applications.

An AIE-active tetra-aryl imidazole-derived chemodosimeter for turn-on recognition of hydrazine and its bioimaging in living cells

A new chemodosimeter SWJT-31 with an aggregation-induced emission (AIE) effect was designed and constructed. Upon increasing the water fraction in the solution, it exhibited typical AIE, which showed bright red fluorescence at 610 nm. SWJT-31 could sensitively and specifically recognize hydrazine by the TICT effect with an LOD of 33.8 nM, which was much lower than the standard of the USEPA. A portable test strip prepared using SWJT-31 was also developed for the visual detection of hydrazine. Eventually, it was successfully used for the detection of hydrazine in water samples and HeLa cells.

Rational correction of pathogenic conformational defects in HTRA1

Loss-of-function mutations in the homotrimeric serine protease HTRA1 cause cerebral vasculopathy. Here, we establish independent approaches to achieve the functional correction of trimer assembly defects. Focusing on the prototypical R274Q mutation, we identify an HTRA1 variant that promotes trimer formation thus restoring enzymatic activity in vitro. Genetic experiments in Htra1R274Q mice further demonstrate that expression of this protein-based corrector in trans is sufficient to stabilize HtrA1-R274Q and restore the proteomic signature of the brain vasculature. An alternative approach employs supramolecular chemical ligands that shift the monomer-trimer equilibrium towards proteolytically active trimers. Moreover, we identify a peptidic ligand that activates HTRA1 monomers. Our findings open perspectives for tailored protein repair strategies.

Portable smartphone platform utilizing AIE-featured carbon dots for multivariate visual detection for Cu2+, Hg2+ and BSA in real samples

Heavy metals cause serious toxic threats to both environment and human health. The multivariate, instrument-free, portable, and rapid detection strategy is crucial for determination of heavy metals. Herein, aggregation-induced emission (AIE) featured carbon dots (SN-CDs) were fabricated hydrothermally by optimizing co-doping precursors. With bright yellow emission at 560 nm, the SN-CDs were utilized for multivariate sensing Cu2+, Hg2+ and bovine serum albumin (BSA) based on AIE behavior and static quenching effect, with detection limits of 0.46 μmol·L-1, 25.8 nmol·L-1 and 1.52 μmol·L-1. A portable smartphone platform was constructed to enable portable, prompt, and sensitive analysis for Cu2+, Hg2+, and BSA via different strategies in real water and food samples with satisfied recovery. Moreover, a logic gate circuit was designed to provide the possibilities for utilization of intelligent facility. The proposed AIE SN-CDs possessing great contribution in preferable sensing performance, present promising prospects in real-time monitoring of environment and food safety.

A structure-guided strategy to design Golgi apparatus-targeted type-I/II aggregation-induced emission photosensitizers for efficient photodynamic therapy

The Golgi apparatus (GA) is a vital target for anticancer therapy due to its sensitivity against reactive oxygen species (ROS)-induced oxidative stress that could lead to cell death. In this study, we designed a series of aggregation-induced emission (AIE)-based photosensitizers (TPAPyTZ, TPAPyTC, TPAPyTM, and TPAPyTI) carrying different ROS with selective GA-targeted ability. The in vitro study showed that TPAPyTZ and TPAPyTC displayed strong AIE characteristics, robust type-I/II ROS production capabilities, specific GA-targeted, high photostability, and high imaging quality. The cell-uptake of TPAPyTZ was found primarily through an energy-dependent caveolae/raft-mediated endocytosis pathway. Remarkably, TPAPyTZ induced GA-oxidative stress, leading to GA fragmentation, downregulation of GM130 expression, and activation of mitochondria caspase-related apoptosis during photodynamic therapy (PDT). In vivo experiments revealed that TPAPyTZ significantly inhibited tumor proliferation under lower-intensity white light irradiation with minimal side effects. Overall, our work presents a promising strategy for designing AIEgens for fluorescence imaging-guided PDT. Additionally, it enriched the collection of GA-targeted leads for the development of cancer theranostics capable of visualizing dynamic changes in the GA during cancer cell apoptosis, which could potentially enable early diagnosis applications in the future. STATEMENT OF SIGNIFICANCE: AIE luminogens (AIEgens) are potent phototheranostic agents that can exhibit strong fluorescence emission and enhance ROS production in the aggregate states. In this study, through the precise design of photosensitizers with four different electron-acceptors, we constructed a series of potent AIEgens (TPAPyTZ, TPAPyTC, TPAPyTM, and TPAPyTI) with strong fluorescence intensity and ROS generation capacity. Among them, TPAPyTZ with an extended π-conjugation displayed the strongest ROS generation ability and anti-tumor activity, resulting in an 88 % reduction in tumor weight. Our studies revealed that the enhanced activity of TPAPyTZ may be due to its unique Golgi apparatus (GA)-targeted ability, which causes GA oxidative stress followed by effective cancer cell apoptosis. This unique GA-targeted feature of TPAPyTZ remains rare in the reported AIEgens, which mainly target organelles such as lysosome, mitochondria, and cell membrane. The successful design of a GA-targeted and potent AIEgen could enrich the collection of GA-targeted luminogens, providing a lead theranostic for the further development of fluorescence imaging-guided PDT, and serving as a tool to explore the potential mechanism and discover new GA-specific drug targets.

Recent advances in AIEgen-based chemosensors for small molecule detection, with a focus on ion sensing

Since the aggregation-based emission (AIE) phenomenon emerged in 2001, numerous chemical designs have been built around the AIE concept, displaying its utility for diverse applications, including optics, electronics, energy, and biosciences. The present review critically evaluates the broad applicability of AIEgen-based chemical models towards sensing small analytes and the structural design strategies adjusting the mode of action reported since the last decade. Various AIEgen models have been discussed, providing qualitative and quantitative estimation of cationic metal ions and anionic species, as well as biomolecular, cellular, and organelle-specific probes. A systematic overview of the reported structural design and the underlying working mode will pave the way for designing and developing the next generation of AIEgens for specific applications.

Ligand Meta-Anchoring Strategy in Metal-Organic Frameworks for Remarkable Promotion of Quantum Yields

Aggregation is a conventional method to enhance the quantum yields (QYs) of pure organic luminophores due to the restriction of intramolecular motions (RIM). However, how to realize RIM in metal-organic frameworks (MOFs) is still unclear and challenging. In this work, the ligand meta-anchoring strategy is first proposed and proved to be an effective and systematic approach to restrict the intramolecular motions of MOFs for the QY improvement. By simply shifting the substituent position in the ligand from para to meta, the QY of the resulting MOF is significantly enhanced by eleven-fold. The value is even higher than that of ligand aggregates, demonstrating the strong RIM effect of this ligand meta-anchoring strategy. The introduction of co-ligand induces the appearance of visible yellow room temperature phosphorescence with a lifetime of 222 ms due to the QY enhancement and the charge transfer between the donor and accepter units. The present work thus broadens the understanding of the RIM mechanism from a new perspective, develops a novel method to realize RIM and expands the applicable objects from pure organic materials to organic-inorganic hybrid materials.

Deep blue emitting dual state fluorescent triphenylamine-dicyclohexylurea derivative: Multi-stimuli responsive fluorescence switching and methanol/water sensing

A new deep blue emissive organic fluorophore (N-cyclohexyl-N-(cyclohexylcarbamoyl)-4-(diphenylamino)benzamide (NCDPB)) was designed and synthesized, which showed strong fluorescence both in solution and solid-state. Solid-state structural analysis of NCDPB revealed non-planar twisted molecular conformation with extended hydrogen bonding between the amide functionalities. The propeller shaped triphenylamine (TPA) and non-planar cyclohexyl unit prevented close π…π stacking and produced strong deep blue emission in the solid state (λmax = 400 nm, quantum yield (Φf) = 12.6 %). NCDPB also exhibited strong solvent polarity dependent tunable emission in solution (λmax = 402-462 nm, Φf = 1.15 (compared to quinine sulphate)). NCDPB showed reversible fluorescence switching between two fluorescence states upon mechanical crushing and heating/solvent exposure. Mechanical crushing caused red shifting of fluorescence from 400 to 447 nm and heating/solvent exposure reversed the fluorescence. Further, NCDPB also displayed off-on reversible/self-reversible fluorescence switching upon exposure to trifluoracetic acid (TFA) and NH3. The repeated fluorescence switching cycles indicated high reversibility without any significant change of fluorescence intensity. The drastically different fluorescence of NCDPB in CH3OH and EtOH was utilized to distinguish them and monitor CH3OH contamination in ethanol and benzene. It showed limit of detection (LOD) of methanol up to 0.25 % and 7 % in benzene and ethanol, respectively. The water sensitive fluorescence modulation of NCDPB in organic solvents was used to sensing water contamination in common organic solvents. Thus, integration of twisted TPA with H-bonding urea produced dual state emitting organic fluorophore with multi-responsive fluorescence switching and solvent sensing.

In Situ X-Ray Techniques Unraveling Charge Distribution Induced by Halogen Bonds in Solvates of an Iodo-Substituted Squaraine Dye

The importance of halogen bonds (XBs) in the regulation of material properties through a variation in the electrostatic potential of the halogen atom is not attracted much attention. Herein, this study utilizes in situ single crystal X-ray diffraction and synchrotron-based X-ray techniques to investigate the cooling-triggered irreversible single-crystal-to-single-crystal transformation of the DMF solvated iodo-substituted squaraine dye (SQD-I). Transformation is observed to be mediated by solvent-involved XB formation and strengthening of electrostatic interaction between adjacent SQD-I molecules. By immersing a DMF solvate in acetonitrile a solvent exchange without loss of long-range ordering is observed. This is attributed to conservation of the molecular charge distribution of SQD-I molecules during the process. The different solvates can be used in combination for temperature-dependent image encryption. This work emphasizes the changes caused by XB formation to the electrostatic potentials of halogen containing molecules and their influence on material properties and presents the potential utility of XBs in the design of soft-porous crystals and luminescent materials.

Small molecule- and peptide-drug conjugates addressing integrins: A story of targeted cancer treatment

Targeted cancer treatment should avoid side effects and damage to healthy cells commonly encountered during traditional chemotherapy. By combining small molecule or peptidic ligands as homing devices with cytotoxic drugs connected by a cleavable or non-cleavable linker in peptide-drug conjugates (PDCs) or small molecule-drug conjugates (SMDCs), cancer cells and tumours can be selectively targeted. The development of highly affine, selective peptides and small molecules in recent years has allowed PDCs and SMDCs to increasingly compete with antibody-drug conjugates (ADCs). Integrins represent an excellent target for conjugates because they are overexpressed by most cancer cells and because of the broad knowledge about native binding partners as well as the multitude of small-molecule and peptidic ligands that have been developed over the last 30 years. In particular, integrin αVβ3 has been addressed using a variety of different PDCs and SMDCs over the last two decades, following various strategies. This review summarises and describes integrin-addressing PDCs and SMDCs while highlighting points of great interest.

A supramolecular photosensitizer based on triphenylamine and pyrazine with aggregation-induced emission properties for high-efficiency photooxidation reactions

Recently, there has been a great interest in the study of photocatalysts (PCs) and photosensitizers (PSs) in the field of organic photocatalysis. In the present study, a pure organic thermally activated delayed fluorescence (TADF) molecule 4,4'-(12-(pyridin-4-yl)dibenzo[f,h]pyrido[2,3-b]quinoxaline-3,6-diyl)bis(N,N-diphenylaniline) (DPQ-TPA) was designed and synthesized, which not only have excellent TADF property and small energy splitting (ΔEST), but also can self-assembly in water to form cross-linked nanoparticles with exceptional aggregation-induced emission (AIE) characteristics. DPQ-TPA exhibits excellent remarkable selectivity and notably enhances the production capacity of reactive oxygen species (ROS), particularly 1O2, which was employed as a highly effective photocatalyst in the photooxidation reaction of phosphine and hydroazobenzenes under blue light irradiation with high yields up to 94% and 91%, respectively. This work expands the potential application of (donor-acceptor) D-A type AIE-TADF molecules in photocatalytic organic transformations through supramolecular self-assembly.

Covalent organic frameworks (COFs) as carrier for improved drug delivery and biosensing applications

Porous organic frameworks (POFs) represent a significant subclass of nanoporous materials in the field of materials science, offering exceptional characteristics for advanced applications. Covalent organic frameworks (COFs), as a novel and intriguing type of porous material, have garnered considerable attention due to their unique design capabilities, diverse nature, and wide-ranging applications. The unique structural features of COFs, such as high surface area, tuneable pore size, and chemical stability, render them highly attractive for various applications, including targeted and controlled drug release, as well as improving the sensitivity and selectivity of electrochemical biosensors. Therefore, it is crucial to comprehend the methods employed in creating COFs with specific properties that can be effectively utilized in biomedical applications. To address this indispensable fact, this review paper commences with a concise summary of the different methods and classifications utilized in synthesizing COFs. Second, it highlights the recent advancements in COFs for drug delivery, including drug carriers as well as the classification of drug delivery systems and biosensing, encompassing drugs, biomacromolecules, small biomolecules and the detection of biomarkers. While exploring the potential of COFs in the biomedical field, it is important to acknowledge the limitations that researchers may encounter, which could impact the practicality of their applications. Third, this paper concludes with a thought-provoking discussion that thoroughly addresses the challenges and opportunities associated with leveraging COFs for biomedical applications. This review paper aims to contribute to the scientific community's understanding of the immense potential of COFs in improving drug delivery systems and enhancing the performance of biosensors in biomedical applications.

Less is More: Asymmetric D-A Type Agent to Achieve Dynamic Self-Assembled Nanoaggregates for Long-Acting Photodynamic Therapy

To enhance the phototheranostic performance, agents with high reactive oxygen species (ROS) generation, good tumor-targeting ability, and prolonged retention are urgently needed. However, symmetric donor-acceptor (D-A) type agents usually produce spherical nanoaggregates, leading to good tumor targeting but inferior retention. Rod-like nanoaggregates are desired to extend their retention in tumors; however, this remains a challenge. In particular, agents with dynamically changeable shapes that integrate merits of different morphologies are seldomly reported. Therefore, self-assembled organic nanoaggregates with smart shape tunability are designed here using an asymmetric D-A type TIBT. The photoluminescence quantum yield in solids is up to 52.24% for TIBT. TIBT also exhibits high ROS generation in corresponding nanoaggregates (TIBT-NCs). Moreover, dynamic self-assembly in shape changing from nanospheres to nanorods occurrs in TIBT-NCs, contributing to the enhancement of ROS quantum yield from 0.55 to 0.72. In addition, dynamic self-assembly can be observed for both in vitro and in vivo, conferring TIBT-NCs with strong tumor targeting and prolonged retention. Finally, efficient photodynamic therapy to inhibit tumor growth is achieved in TIBT-NCs, with an inhibition rate of 90%. This work demonstrates that asymmetric D-A type agents can play significant roles in forming self-assembled organic nanoaggregates, thus showing great potential in long-acting cancer therapy.

Recent advances in tunable solid-state emission based on α-cyanodiarylethenes: from molecular packing regulation to functional development

The design and development of organic solid-state luminescent materials stand as crucial pillars within the realm of contemporary photofunctional materials. Overcoming challenges such as concentration quenching and achieving tailored luminescent properties necessitates a judicious approach to molecular structure design and the strategic utilization of diverse stimuli to modulate molecular packing patterns. Among the myriad candidates, α-cyanodiarylethenes (CAEs) emerge with distinctive solid-state luminescent attributes, capable of forming self-assembled packing structures with varying degrees of π-π stacking. This characteristic endows them with potential in the field of intelligent molecular responsive materials and optoelectronic devices. This tutorial review embarks on an exploration of design strategies geared towards attaining tunable solid-state emission through customized packing of CAEs. It explores the utilization of stimuli responses, including such as mechanical forces, light irradiation, solvent interactions, thermal influences, as well as the utilization of co-assembly methodologies. The overarching aim of this review is to provide a widely applicable platform fostering the flourishing development of modern organic photofunctional materials through integrating principles of molecular engineering, organic optoelectronics, and materials science.

Chemically fueled dynamic switching between assembly-encoded emissions

Self-assembly provides access to non-covalently synthesized supramolecular materials with distinct properties from a single building block. However, dynamic switching between functional states still remains challenging, but holds enormous potential in material chemistry to design smart materials. Herein, we demonstrate a chemical fuel-mediated strategy to dynamically switch between two distinctly emissive aggregates, originating from the self-assembly of a naphthalimide-appended peptide building block. A molecularly dissolved building block shows very weak blue emission, whereas, in the assembled state (Agg-1), it shows cyan emission through π stacking-mediated excimer emission. The addition of a chemical fuel, ethyl-3-(3-(dimethylamino)propyl)carbodiimide (EDC), converts the terminal aspartic acid present in the building block to an intra-molecularly cyclized anhydride in situ forming a second aggregated state, Agg-2, by changing the molecular packing, thereby transforming the emission to strong blue. Interestingly, the anhydride gets hydrolyzed gradually to reform Agg-1 and the initial cyan emission is restored. The kinetic stability of the strong blue emissive aggregate, Agg-2, can be regulated by the added concentration of the chemical fuel. Moreover, we expand the scope of this system within an agarose gel matrix, which allows us to gain spatiotemporal control over the properties, thereby producing a self-erasable writing system where the chemical fuel acts as the ink.

Noncovalent Interaction Guided Precise Photoluminescence Regulation of Gold Nanoclusters in Both Isolate Species and Aggregate States

Designing luminophores bright in both isolate species and aggregate states is of great importance in many emerging cutting-edge applications. However, the conventional luminophores either emit in isolate species but quench in aggregate state or emit in aggregate state but darken in isolate species. Here we demonstrate that the precise regulation of noncovalent interactions can realize luminophores bright in both isolate species and aggregate states. It is firstly discovered that the intra-cluster interaction enhances the emission of atomically precise Au25(pMBA)18 (pMBA=4-mercaptobenzoic acid), a nanoscale luminophore, while the inter-cluster interaction quenches the emission. The emission enhancing strategies are then well-designed by both introducing exogenous substances to block inter-cluster interaction and surface manipulation of Au25(pMBA)18 at the molecular level to enhance intra-cluster interaction, opening new possibilities to controllably enhance the luminophore's photoluminescence in both isolate species and aggregate states in different phases including aqueous solution, solid state and organic solvents.

Photodynamic therapy for cancer: mechanisms, photosensitizers, nanocarriers, and clinical studies

Photodynamic therapy (PDT) is a temporally and spatially precisely controllable, noninvasive, and potentially highly efficient method of phototherapy. The three components of PDT primarily include photosensitizers, oxygen, and light. PDT employs specific wavelengths of light to active photosensitizers at the tumor site, generating reactive oxygen species that are fatal to tumor cells. Nevertheless, traditional photosensitizers have disadvantages such as poor water solubility, severe oxygen-dependency, and low targetability, and the light is difficult to penetrate the deep tumor tissue, which remains the toughest task in the application of PDT in the clinic. Here, we systematically summarize the development and the molecular mechanisms of photosensitizers, and the challenges of PDT in tumor management, highlighting the advantages of nanocarriers-based PDT against cancer. The development of third generation photosensitizers has opened up new horizons in PDT, and the cooperation between nanocarriers and PDT has attained satisfactory achievements. Finally, the clinical studies of PDT are discussed. Overall, we present an overview and our perspective of PDT in the field of tumor management, and we believe this work will provide a new insight into tumor-based PDT.

Enhancing corannulene chemiluminescence, electrochemiluminescence and photoluminescence by means of an azabora-helicene to slow down its bowl inversion

Aromatic system extension of corannulene (Cor) is a synthetic challenge to access non-planar polyaromatic hydrocarbons (PAHs). Herein, we report the design and synthesis of azaborahelicene corannulene 1 through hybridization of an azabora[5] helical structure and subsequent luminescence studies. Significant enhancement in chemiluminescence (CL), electroluminescence (ECL) and photoluminescence (PL) is achieved compared to those of pristine Cor. Specifically, hybrid 1 shows a notable augmentation in absolute luminescence quantum efficiencies: 25-fold for CL, up to 23-fold for ECL with BPO as a coreactant, and 30-fold for PL, respectively, compared to those of pristine Cor. Intriguingly, the blue light emission observed in all three luminescence types suggests the presence of a single excited state. As revealed by variable-temperature (VT) 1H NMR experiments, the bowl inversion frequency apparently decelerates by the steric effect of the helix motif in 1, which could contribute to the enhanced luminescent properties by reducing excited energy losses non-radiatively through fewer molecular motions; these enhanced luminescence observations could be categorized alongside the aggregation induced emission (AIE) and crystallization-induced emission (CIE) phenomena. This work not only provides fundamental insights into improved luminescence quantum efficiencies via strategic modulation of the molecular structure and geometry, but the work also reveals Cor's inherent potential to build efficient blue-light emitting materials and devices.

Recent Progress in Nonconventional Luminescent Macromolecules and their Applications

Traditional π-conjugated luminescent macromolecules typically suffer from aggregation-caused quenching (ACQ) and high cytotoxicity, and they require complex synthetic processes. In contrast, nonconventional luminescent macromolecules (NCLMs) with nonconjugated structures possess excellent biocompatibility, ease of preparation, unique luminescence behavior, and emerging applications in optoelectronics, biology, and medicine. NCLMs are currently believed to produce inherent luminescence due to through-space conjugation of overlapping electron orbitals in solid/aggregate states. However, as experimental facts continue to exceed expectations or even overturn some previous assumptions, there is still controversy about the detailed luminous mechanism of NCLMs, and extensive studies are needed to further explore the mechanism. This Perspective highlights recent progress in NCLMs and classifies and summarizes these advances from the viewpoint of molecular design, mechanism exploration, applications, and challenges and prospects. The aim is to provide guidance and inspiration for the huge fundamental and practical potential of NCLMs.

Carbazolyl-Modified Neutral Ir(III) Complexes for Efficient Detection of Picric Acid in Aqueous Media

Based on the electron-deficient property of picric acid (PA), two neutral Ir(III) complexes 1 and 2 modified with the electron-rich carbazolyl groups were synthesized and characterized. Both 1 and 2 exhibit aggregation-induced phosphorescence emission (AIPE) properties in THF/H2O. Among them, 2 is extremely sensitive for detecting PA with a limit of detection of 0.15 μM in THF/H2O. Furthermore, the selectivity for PA is significantly higher compared to other analytes, enabling the efficient detection of PA in four common water samples. The density functional theory calculations and the spectroscopic results confirm that the sensing mechanism is photo-induced electron transfer (PET).

Sulphur-atom positional engineering in perylenimide: structure-property relationships and H-aggregation directed type-I photodynamic therapy

An innovative design strategy of placing sulfur (S)-atoms within the pendant functional groups and at carbonyl positions in conventional perylenimide (PNI-O) has been demonstrated to investigate the condensed state structure-property relationship and potential photodynamic therapy (PDT) application. Incorporation of simply S-atoms at the peri-functionalized perylenimide (RPNI-O) leads to an aggregation-induced enhanced emission luminogen (AIEEgen), 2-hexyl-8-(thianthren-1-yl)-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dione (API), which achieves a remarkable photoluminescence quantum yield (Φ PL) of 0.85 in aqueous environments and established novel AIE mechanisms. Additionally, substitution of the S-atom at the carbonyl position in RPNI-O leads to thioperylenimides (RPNI-S): 2-hexyl-8-phenyl-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dithione (PPIS), 8-([2,2'-bithiophen]-5-yl)-2-hexyl-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dithione (THPIS), and 2-hexyl-8-(thianthren-1-yl)-1H-benzo[5,10]anthra[2,1,9-def]isoquinoline-1,3(2H)-dithion (APIS), with distinct photophysical properties (enlarged spin-orbit coupling (SOC) and Φ PL ≈ 0.00), and developed diverse potent photosensitizers (PSs). The present work provides a novel SOC enhancement mechanism via pronounced H-aggregation. Surprisingly, the lowest singlet oxygen quantum yield (Φ Δ) and theoretical calculation suggest the specific type-I PDT for RPNI-S. Interestingly, RPNI-S efficiently produces superoxide (O2˙-) due to its remarkably lower Gibbs free energy (ΔG) values (THPIS: -40.83 kcal mol-1). The non-toxic and heavy-atom free very specific thio-based PPIS and THPIS PSs showed selective and efficient PDT under normoxia, as a rare example.

Copper-catalysed perarylation of cyclopentadiene: synthesis of hexaarylcyclopentadienes

While hexaphenylsilacyclopentadiene (hexaphenylsilole) is viewed as an archetypal Aggregation-Induced Emission (AIE) luminogen, its isostructural hydrocarbon surrogate hexaphenylcyclopentadiene has strikingly never been investigated in this context, most probably due to a lack of synthetic availability. Herein, we report a straightforward synthesis of hexaphenylcyclopentadiene, via the direct perarylation of cyclopentadiene upon copper(i) catalysis under microwave activation, with the formation of six new C-C bonds in a single synthetic operation. Using zirconocene dichloride as a convenient source of cyclopentadiene and a variety of aryl iodides as coupling partners, this copper-catalysed cross-coupling reaction gave rise to a series of unprecedented hexaarylcyclopentadienes. The latter are direct precursors of extended π-conjugated polycyclic compounds, and their cyclodehydrogenation under Scholl reaction conditions yielded helicenic 17,17-diarylcyclopenta[l,l']diphenanthrenes. These structurally complex polyannelated fluorene derivatives can now be prepared in only two synthetic steps from cyclopentadiene.

Membrane-Anchored Aggregation-Induced Emission Luminogens: Accurate Labeling and Efficient Photodynamic Inactivation of Streptococcus mutans in Anticaries Therapy

Dental caries is a widespread bacterial infectious disease that imposes a significant public health burden globally. The primary culprits in caries development are cariogenic bacteria, notably Streptococcus mutans (S. mutans), due to their robust biofilm-forming capabilities. To address this issue, a series of cationic pyridinium-substituted photosensitizers with aggregation-induced emission have been designed. All of these aggregation-induced emission luminogens (AIEgens) exhibit outstanding microbial visualization and photodynamic killing of S. mutans, thanks to their luminous fluorescence and efficient singlet oxygen generation ability. Notably, one of the membrane-anchored AIEgens (TDTPY) can inactivate planktic S. mutans and its biofilm without causing significant cytotoxicity. Importantly, application of TDTPY-mediated photodynamic treatment on in vivo rodent models has yielded commendable imaging results and effectively slowed down caries progression with assured biosafety. Unlike traditional single-mode anticaries materials, AIEgens integrate the dual functions of detecting and removing S. mutans and are expected to build a new caries management diagnosis and treatment platform. To the best of our knowledge, this is also the first report on the use of AIEgens for anticaries studies both in vitro and in vivo.

Uncovering the Aggregation-Induced Emission Mechanisms of Phenoxazine and Phenothiazine Groups

Molecules with both aggregation-induced emission (AIE) and thermally activated delayed fluorescence (TADF) properties are potential organic light-emitting diode materials; however, the AIE and TADF mechanisms are still debatable. In this work, four molecules incorporating carbazole (Cz), phenoxazine (PXZ), and phenothiazine (PTZ) as donor groups to the diphenylsulfone acceptor were investigated. The experiment results indicate that a molecule containing Cz exhibits solely TADF properties, whereas molecules containing PXZ and PTZ demonstrate both TADF and AIE characteristics. As for DPS-PTZ, the result indicates that the thin-film environment restricts molecular twisting, consequently reducing nonradiative decay, thereby attributing to the AIE property by density functional theory and molecular dynamics simulation. As for DPS-PXZ, the result suggests that the restricted access to a conical intersection in a singlet excited via an expansion in the C-S-C angle is the pivotal factor for the AIE characteristic. The C-S-C angle twist of DPS-PXZ is impeded in the aggregate state and resulted in luminescence. Understanding the mechanisms serves as a valuable guide for the development of new AIE systems, enabling their application in various practical domains.

Nonpolar selective emission (NPSE) of carbonyl-bridged rhodols

Polarity-responsive luminophores (PRLs), whose emission properties change in response to the polarity of the surrounding environment, are used for the fluorescence sensing of intracellular environments and various chemical compounds. Herein, we propose a concept called nonpolar selective emission (NPSE) for the development of a new PRL family. Unlike the conventional emission of PRLs, the NPSE luminophore can switch to a completely non-emissive state upon a slight increase in solvent polarity. The NPSE concept offers a new means of distinguishing between nonpolar and low-polarity environments. Moreover, the NPSE property is little affected by the viscosity of the surrounding medium. We demonstrate that NPSE dyes can be used as emission sensors for molecular gases. Furthermore, we discovered the potential use of NPSE dyes as a time-dependent security ink triggered by the volatilization of polar molecules.

Aggregation-induced emission of TTCPy-3: A novel approach for eradicating Nocardia seriolae infections in aquatic fishes

Aquatic fishes are threatened by the strong pathogenic bacterium Nocardia seriolae, which challenges the current prevention and treatment approaches. This study introduces luminogens with aggregation-induced emission (AIE) as an innovative and non-antibiotic therapy for N. seriolae. Specifically, the AIE photosensitizer, TTCPy-3 is employed against N. seriolae. We evaluated the antibacterial activity of TTCPy-3 and investigated the killing mechanism against N. seriolae, emphasizing its ability to aggregate within the bacterium and produce reactive oxygen species (ROS). TTCPy-3 could effectively aggregate in N. seriolae, generate ROS, and perform real-time imaging of the bacteria. A bactericidal efficiency of 100% was observed while concentrations exceeding 4 μM in the presence of white light irradiation for 10 min. In vivo, evaluation on zebrafish (Danio rerio) confirmed the superior therapeutic efficacy induced by TTCPy-3 to fight against N. seriolae infections. TTCPy-3 offers a promising strategy for treating nocardiosis of fish, paving the way for alternative treatments beyond traditional antibiotics and potentially addressing antibiotic resistance.

Bright ESIPT emission from 2,6-di(thiazol/oxazol/imidazol-2-yl)phenol derivatives in solution, aggregation and solid states

Most luminophores often suffer from the problem of aggregation-caused quenching (ACQ) or fluorescence disappearance in dilute solution. It is significant to bridge the gap between ACQ and AIE. In this work, a facile but effective strategy was proposed for the fabrication of always-on luminophores based on the excited state intramolecular proton transfer (ESIPT) mechanism, and six luminophores emitting bright fluorescence in solution, aggregation and solid states were synthesized from 5-tert-butyl-2-hydroxyisophthalaldehyde. All these ESIPT systems show only keto emission owing to their congested structures which block the breakage of intramolecular hydrogen bond (O-H⋯N) by solvation, and subsequently make enol emission impossible. Three of these luminophores are prone to convert into the corresponding phenolate anions emitting blue-shifted emission, which enable them to sense pH variation in the weakly basic range. Furthermore, white-light emission was achieved by combining two of them which show complementary-color fluorescence, and one of them was utilized for bioimaging of living Hela cells and the high-resolution image was obtained.

Photophysics of fluorescent nanoparticles based on organic dyes - challenges and design principles

Fluorescent nanoparticles have become attractive for bioanalysis and imaging, due to their high brightness and photostability. Many different optical materials have been applied in fluorescent nanoparticles with a broad range of properties and characteristics. One appealing approach is the incorporation of molecular organic fluorophores in nanoparticles with the intention of transferring their known attractive solution-state properties directly to the nanoparticles. However, as molecular dyes are packed closely together in the nanoparticles their interactions most often result in fluorescence quenching and change in spectral properties making this approach challenging. In this perspective we will first discuss the origins of quenching and spectral shifts observed in dye based nanoparticles. On this background, we will then describe various designs of dye based NPs and how they address the challenges of dye-dye interactions and quenching. Our aim is to provide a general framework for understanding the supramolecular mechanisms that determine the photophysics of dye based nanoparticles. This framework of molecular photophysics and its relation to the internal structure of dye based nanoparticles can hopefully serve to assist rational design and optimization of new and improved dye based nanoparticles.

NIR-II Fluorescence Imaging for In Vivo Quantitative Analysis

In vivo real-time qualitative and quantitative analysis is essential for the diagnosis and treatment of diseases such as tumors. Near-infrared-II (NIR-II, 1000-1700 nm) bioimaging is an emerging visualization modality based on fluorescent materials. The advantages of NIR-II region fluorescent materials in terms of reduced photon scattering and low tissue autofluorescence enable NIR-II bioimaging with high resolution and increasing depth of tissue penetration, and thus have great potential for in vivo qualitative and quantitative analysis. In this review, we first summarize recent advances in NIR-II imaging, including fluorescent probe selection, quantitative analysis strategies, and imaging. Then, we describe in detail representative applications to illustrate how NIR-II fluorescence imaging has become an important tool for in vivo quantitative analysis. Finally, we describe the future possibilities and challenges of NIR-II fluorescence imaging.

Semi-crystalline polymers with supramolecular synergistic interactions: from mechanical toughening to dynamic smart materials

Semi-crystalline polymers (SCPs) with anisotropic amorphous and crystalline domains as the basic skeleton are ubiquitous from natural products to synthetic polymers. The combination of chemically incompatible hard and soft phases contributes to unique thermal and mechanical properties. The further introduction of supramolecular interactions as noncovalently interacting crystal phases and soft dynamic crosslinking sites can synergize with covalent polymer chains, thereby enabling effective energy dissipation and dynamic rearrangement in hierarchical superstructures. Therefore, this review will focus on the design principles of SCPs by discussing supramolecular construction strategies and state-of-the-art functional applications from mechanical toughening to sophisticated functions such as dynamic adaptivity, shape memory, ion transport, etc. Current challenges and further opportunities are discussed to provide an overview of possible future directions and potential material applications.

Synthesis, optical properties, and application of novel chalcone skeleton as pH fluorescent probe: Based AIE + ESIPT strategy

A series of "turn off" pH fluorescence probes with chalcone skeleton for basic system have been developed. The molecules emitted bright yellow fluorescence under acidic condition, resulting AIE coupled ESIPT characteristic and ICT process. What's more, the compounds exhibited excellent sensitivity and selectivity for detecting pH as a facile "On-Off" fluorescence probe, and the fluorescence of them were quenched with the ESIPT process interrupted under alkaline condition. Theoretical calculation for the related compounds also performed to verify the electron effect on photophysical properties and confirm the rational speculation on the mechanism.

Platinum complexes with aggregation-induced emission

Transition metal-containing materials with aggregation-induced emission (AIE) have brought new opportunities for the development of biological probes, optoelectronic materials, stimuli-responsive materials, sensors, and detectors. Coordination compounds containing the platinum metal have emerged as a promising option for constructing effective AIE platinum complexes. In this review, we classified AIE platinum complexes based on the number of ligands. We focused on the development and performance of AIE platinum complexes with different numbers of ligands and discussed the impact of platinum ion coordination and ligand structure variation on the optoelectronic properties. Furthermore, this review analyzes and summarizes the influence of molecular geometries, stacking models, and aggregation environments on the optoelectronic performance of these complexes. We provided a comprehensive overview of the AIE mechanisms exhibited by various AIE platinum complexes. Based on the unique properties of AIE platinum complexes with different numbers of ligands, we systematically summarized their applications in electronics, biological fields, etc. Finally, we illustrated the challenges and opportunities for future research on AIE platinum complexes, aiming at giving a comprehensive summary and outlook on the latest developments of functional AIE platinum complexes and also encouraging more researchers to contribute to this promising field.

Peptide-Directed Synthesis of Aggregation-Induced Emission Enhancement-Active Gold Nanoclusters for Single- and Two-Photon Imaging of Lysosome and Expressed αvβ3 Integrin Receptors

This study explores the synthesis and characterization of aggregation-induced emission enhancement (AIEE)-active gold nanoclusters (AuNCs), focusing on their near-infrared luminescence properties and potential applications in biological imaging. These AIEE-active AuNCs were synthesized via the NaBH4-mediated reduction of HAuCl4 in the presence of peptides. We systematically investigated the influence of the peptide sequence on the optical features of the AuNCs, highlighting the role of glutamic acid in enhancing their quantum yield (QY). Among the synthesized peptide-stabilized AuNCs, EECEE-stabilized AuNCs exhibited the maximum QY and a pronounced AIEE effect at pH 5.0, making them suitable for the luminescence imaging of intracellular lysosomes. The AIEE characteristic of the EECEE-stabilized AuNCs was demonstrated through examinations using transmission electron microscopy, dynamic light scattering, zeta potential analysis, and single-particle imaging. The formation of the EECEE-stabilized AuNCs was confirmed by size-exclusion chromatography and mass spectrometry. Spectroscopic and electrochemical examinations uncover the formation process of EECEE-stabilized AuNCs, comprising EECEE-mediated reduction, NaBH4-induced nucleation, complex aggregation, and subsequent cluster growth. Furthermore, we demonstrated the utility of these AuNCs as luminescent probes for intracellular lysosomal imaging, leveraging their pH-responsive AIEE behavior. Additionally, cyclic arginylglycylaspartic acid (RGD)-modified AIEE dots, derived from cyclic RGD-linked peptide-induced aggregation of EECEE-stabilized AuNCs, were developed for single- and two-photon luminescence imaging of αvβ3 integrin receptor-positive cancer cells.

Exclusive and Switchable Superoxide Radical Generation by O2-Capture-Based Electron Transfer and Supramolecular Assembly

Type-I photosensitizers (PSs) can generate free radical anions with a broad diffusion range and powerful damage effect, rendering them highly desirable in various areas. However, it still remains a recognized challenge to develop pure Type-I PSs due to the inefficiency in producing oxygen radical anions through the collision of PSs with nearby substrates. In addition, regulating the generation of oxygen radical anions is also of great importance toward the control of photosensitizer (PS) activities on demand. Herein, a piperazine-based cationic Type-I PS (PPE-DPI) that exhibits efficient intersystem crossing and subsequently captures oxygen molecules through binding O2 to the lone pair of nitrogen in piperazine is reported. The close spatial vicinity between O2 and PPE-DPI strongly promotes the electron transfer reaction, ensuring the exclusive superoxide radical (O2 •-) generation via Type-I process. Particularly, PPE-DPI with cationic pyridine groups is able to associate with cucurbit[7]uril (CB[7]) through host-guest interactions. Thus, supramolecular assembly and disassembly are easily utilized to realize switchable O2 •- generation. This switchable Type-I PS is successfully employed in photodynamic antibacterial control.

Supra-Fluorophores: Ultrabright Fluorescent Supramolecular Assemblies Derived from Conventional Fluorophores in Water

Fluorescent organic nanoparticles (NPs) with exceptional brightness hold significant promise for demanding fluorescence bioimaging applications. Although considerable efforts are invested in developing novel organic dyes with enhanced performance, augmenting the brightness of conventional fluorophores is still one of the biggest challenges to overcome. This study presents a supramolecular strategy for constructing ultrabright fluorescent nanoparticles in aqueous media (referred to as "Supra-fluorophores") derived from conventional fluorophores. To achieve this, this course has employed a cylindrical nanoparticle with a hydrophobic microdomain, assembled by a cyclic peptide-diblock copolymer conjugate in water, as a supramolecular scaffold. The noncovalent dispersion of fluorophore moieties within the hydrophobic microdomain of the scaffold effectively mitigates the undesired aggregation-caused quenching and fluorescence quenching by water, resulting in fluorescent NPs with high brightness. This strategy is applicable to a broad spectrum of fluorophore families, covering polyaromatic hydrocarbons, coumarins, boron-dipyrromethenes, cyanines, xanthenes, and squaraines. The resulting fluorescent NPs demonstrate high fluorescence quantum yield (>30%) and brightness per volume (as high as 12 060 m-1 cm-1 nm-3). Moreover, high-performance NPs with emission in the NIR region are constructed, showcasing up to 20-fold increase in both brightness and photostability. This Supra-fluorophore strategy offers a versatile and effective method for transforming existing fluorophores into ultrabright fluorescent NPs in aqueous environments, for applications such as bioimaging.

Modulating Heavy Atom Effect in Germylene for Persistent Room Temperature Phosphorescence

It is worth but still challenging to develop the low-valent main group compounds with persistent room temperature phosphorescence (pRTP). Herein, we presented germylene-based persistent phosphors by introduction of low-valent Ge center into chromophore. A novel phosphors CzGe and its series of derivatives, namely CzGeS, CzGeSe, CzGeAu, and CzGeCu, were synthesized. Experiments and theoretical calculations reveal that the pRTP behavior were "turn on" due to the heavy atom effect of germylene. More importantly, the low-valent of oxidation state and structural traits propelled GeCz had a balance between the intersystem crossing and the shortening of lifetime caused by the heavy atoms, resulting the ultralong lifetime of 309 ms and phosphorescent quantum efficiency of 15.84 %, which is remarkable among heavy main group phosphors. This research provides valuable insights to the design of heavy atoms in phosphors and expand the applications of germylene chemistry.

Theoretical simulation of TADF character of 3,9'-bicarbazole-modified 2,4,6-triphenyl-1,3,5-triazine

CONTEXT

Three donor (D)-acceptor (A)-type temperature-activated delayed fluorescent (TADF) molecules of 9-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-9H-3,9'-bicarbazole (o-TrzDCz), 9-(3-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-9H-3,9'-bicarbazole (m-TrzDCz), and 9-(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-9H-3,9'-bicarbazole (p-TrzDCz) were designed in this paper, and the photophysical properties, including the intersystem crossing rate, the reorganization energies (λ), and the intersystem crossing/reverse intersystem crossing (ISC/RISC) rate, were simulated to explore the effect of substitution sites on their TADF character. The values of the twist angle between the D and A moieties in ground state and the molecular root-mean-square deviation (RMSD) of the S1 and T1 states referenced to the S0 state indicate that o-TrzDCz possess bigger steric hindrance and stabler molecular configuration. The λ values of the ISC/RISC process should be 0.06/0.04 eV for o-TrzDCz, which are much smaller than those of m-TrzDCz (0.51/0.41 eV) and p-TrzDCz (1.93/1.06 eV). At the same time, o-TrzDCz possess the biggest kRISC (7.28 × 106 s-1) and kr (3.12 × 106 s-1) values and the smallest kp (0.10 s-1) value among the three titled molecules. These data indicate that o-TrzDCz should have more excellent TADF character than m-TrzDCz and p-TrzDCz. In a word, this research presents that adjusting the molecular linking manner should be a charming way to explore novel high-efficient TADF molecules.

METHODS

Quantum chemical calculations were performed at PBE0/6-31G* level by Gaussian 09 and ORCA 4.1.0 software packages, and reorganization energies and Huang-Rhys were performed by the DUSHIN program and MOMAP 2019B software package based on the Gaussian 09 output files, while the phosphorescence rates were performed at B3LYP/6-31G* level by Dalton 2021.

Palladium-Catalyzed Triple Suzuki-Miyaura Reactions Using Cyclic (Vinyl Triflate)iodonium Salts

By using cyclic (vinyl triflate)iodonium salts, a novel triple Suzuki-Miyaura reaction was accomplished for the synthesis of polyaromatic ethylene derivatives in the presence of palladium catalysts. The reaction exhibits extensive compatibility with a wide range of readily available arylboronic acids, giving triaryl-substituted ethylenes in good yields.

A Conjugated Carboranyl Main Chain Polymer with Aggregation-Induced Emission in the Near-Infrared

Materials exhibiting aggregation-induced emission (AIE) are both highly emissive in the solid state and prompt a strongly red-shifted emission and should therefore pose as good candidates toward emerging near-infrared (NIR) applications of organic semiconductors (OSCs). Despite this, very few AIE materials have been reported with significant emissivity past 700 nm. In this work, we elucidate the potential of ortho-carborane as an AIE-active component in the design of NIR-emitting OSCs. By incorporating ortho-carborane in the backbone of a conjugated polymer, a remarkable solid-state photoluminescence quantum yield of 13.4% is achieved, with a photoluminescence maximum of 734 nm. In contrast, the corresponding para and meta isomers exhibited aggregation-caused quenching. The materials are demonstrated for electronic applications through the fabrication of nondoped polymer light-emitting diodes. Devices employing the ortho isomer achieved nearly pure NIR emission, with 86% of emission at wavelengths longer than 700 nm and an electroluminescence maximum at 761 nm, producing a significant light output of 1.37 W sr-1 m-2.

Tetraphenylethene-modified polysiloxanes: Synthesis, AIE properties and multi-stimuli responsive fluorescence

Herein, polysiloxane-based aggregation-induced emission (AIE) polymers and rubbers were prepared which display interesting multi-stimuli responsive fluorescence. TPE-modified polydimethylsiloxanes (PDMS-TPE) as polysiloxane-based AIE polymers were synthesized through Heck reaction of bromo-substituted tetraphenylethene (TPE-Br) and vinyl polysiloxanes. As expected, TPE moiety endows the modified polysiloxane with typical AIE behavior. However, limited by the long polymer chains, the aggregation process of PDMS-TPE shows obvious differences compared with the small molecule TPE-Br. The fluorescence of PDMS-TPE in THF/H2O starts to increase when the H2O fraction (fw) is 70% while TPE-Br is nearly non-luminous until the fw is up to 99%. The fluorescence intensity ratio (I/I0) of PDMS-TPE in the aggregated state and dispersed state is over 1300, greater than that of TPE-Br (I/I0 = 380). More importantly, the exceptional thermal motion of Si-O-Si chains and AIE characteristic of TPE moiety work together, enabling PDMS-TPE to show specific temperature-dependent fluorescence with a wider response range of room temperature to 190°C, which is distinguished from TPE-Br. And such fluorescence responsiveness possess good fatigue-resistance. Furthermore, fluorescent silicone rubbers, r-PDMS-TPE were prepared by using PDMS-TPE as additive of the base gum. They display interesting solvent-controllable fluorescence and higher tensile strength (4.42 MPa) than the control sample without TPE component (1.96 MPa). Notably, a unique stretching-enhanced emission (SEE) phenomenon is observed from these TPE-modified silicone rubbers. When being stretched, the rubbers' fluorescent emission intensity could increase by 143%.

Literature Review on Conjugated Polymers as Light-Sensitive Materials for Photovoltaic and Light-Emitting Devices in Photonic Biomaterial Applications

Due to their extended p-orbital delocalization, conjugated polymers absorb light in the range of visible-NIR frequencies. We attempt to exploit this property to create materials that compete with inorganic semiconductors in photovoltaic and light-emitting materials. Beyond competing for applications in photonic devices, organic conjugated compounds, polymers, and small molecules have also been extended to biomedical applications like phototherapy and biodetection. Recent research on conjugated polymers has focused on bioapplications based on the absorbed light energy conversions in electric impulses, chemical energy, heat, and light emission. In this review, we describe the working principles of those photonic devices that have been applied and researched in the field of biomaterials.