Natural polymers for the microencapsulation of cells

The bioink: A comprehensive review on bioprintable materials

This paper discusses "bioink", bioprintable materials used in three dimensional (3D) bioprinting processes, where cells and other biologics are deposited in a spatially controlled pattern to fabricate living tissues and organs. It presents the first comprehensive review of existing bioink types including hydrogels, cell aggregates, microcarriers and decellularized matrix components used in extrusion-, droplet- and laser-based bioprinting processes. A detailed comparison of these bioink materials is conducted in terms of supporting bioprinting modalities and bioprintability, cell viability and proliferation, biomimicry, resolution, affordability, scalability, practicality, mechanical and structural integrity, bioprinting and post-bioprinting maturation times, tissue fusion and formation post-implantation, degradation characteristics, commercial availability, immune-compatibility, and application areas. The paper then discusses current limitations of bioink materials and presents the future prospects to the reader.

Calcium pre-conditioning substitution enhances viability and glucose sensitivity of pancreatic beta-cells encapsulated using polyelectrolyte multilayer coating method

Type I diabetics are dependent on daily insulin injections. A therapy capable of immunoisolating pancreatic beta-cells and providing normoglycaemia is an alternative since it would avoid the late complications associated with insulin use. Here, 3D-concave agarose micro-wells were used to culture robust pancreatic MIN-6 cell spheroids within 24 hours that were shown to exhibit cell-cell contact and uniform size (201 ± 2 μm). A polyelectrolyte multilayer (PEM) approach using alginate and poly-l-lysine was employed to coat cell spheroids. In comparison to conventional PEM, use of a novel Ca²⁺ pre-coating step enhanced beta-cells viability (89 ± 6%) and metabolic activity since it reduced the toxic effect of the cationic polymer. Pre-coating was achieved by treating MIN-6 spheroids with calcium chloride, which enabled the adhesion of anionic polymer to the cells surface. Pre-coated cells coated with four bilayers of polymers were successfully immunoisolated from FITC-mouse antibody and pro-inflammatory cytokines. Novel PEM coated cells were shown to secret significantly (P < 0.05) different amounts of insulin in response to changes in glucose concentration (2 vs. 20 mM). This work presents a 3D culture model and novel PEM coating procedure that enhances viability, maintains functionality and immunoisolates beta-cells, which is a promising step towards an alternative therapy to insulin.

Thermoresponsive Gels

Thermoresponsive gelling materials constructed from natural and synthetic polymers can be used to provide triggered action and therefore customised products such as drug delivery and regenerative medicine types as well as for other industries. Some materials give Arrhenius-type viscosity changes based on coil to globule transitions. Others produce more counterintuitive responses to temperature change because of agglomeration induced by enthalpic or entropic drivers. Extensive covalent crosslinking superimposes complexity of response and the upper and lower critical solution temperatures can translate to critical volume temperatures for these swellable but insoluble gels. Their structure and volume response confer advantages for actuation though they lack robustness. Dynamic covalent bonding has created an intermediate category where shape moulding and self-healing variants are useful for several platforms. Developing synthesis methodology-for example, Reversible Addition Fragmentation chain Transfer (RAFT) and Atomic Transfer Radical Polymerisation (ATRP)-provides an almost infinite range of materials that can be used for many of these gelling systems. For those that self-assemble into micelle systems that can gel, the upper and lower critical solution temperatures (UCST and LCST) are analogous to those for simpler dispersible polymers. However, the tuned hydrophobic-hydrophilic balance plus the introduction of additional pH-sensitivity and, for instance, thermochromic response, open the potential for coupled mechanisms to create complex drug targeting effects at the cellular level.

Injectable alginate-microencapsulated canine adipose tissue-derived mesenchymal stem cells for enhanced viable cell retention

The purpose of this study was to establish an optimized protocol for the production of alginate-encapsulated canine adipose-derived mesenchymal stem cells (cASCs) and evaluate their suitability for clinical use, including viability, proliferation and in vivo cell retention. Alginate microbeads were formed by vibrational technology and the production of injectable microbeads was performed using various parameters with standard methodology. Microbead toxicity was tested in an animal model. Encapsulated cASCs were evaluated for viability and proliferation in vitro. HEK-293 cells, with or without microencapsulation, were injected into the subcutaneous tissue of mice and were tracked using in vivo bioluminescent imaging to evaluate the retention of transplanted cells. The optimized injectable microbeads were of uniform size and approximately 250 µm in diameter. There was no strong evidence of in vivo toxicity for the alginate beads. The cells remained viable after encapsulation, and there was evidence of in vitro proliferation within the microcapsules. In vivo bioluminescent imaging showed that alginate encapsulation improved the retention of transplanted cells and the encapsulated cells remained viable in vivo for 7 days. Encapsulation enhances the retention of viable cells in vivo and might represent a potential strategy to increase the therapeutic potency and efficacy of stem cells.

Fabrication of cell-compatible hyaluronan hydrogels with a wide range of biophysical properties through high tyramine functionalization

Hyaluronan–tyramine derivatives are synthesized and the hydrogels obtained permit viable cell encapsulation with a wide range of mechanical properties.

Microencapsulated Cells for Cancer Therapy

The microencapsulation of different types of cells that are able to produce therapeutic factors is being investigated for the treatment of several human diseases. Most efforts are focused on chronic and degenerative diseases as this strategy could become an alternative to some commonly used parenteral treatments that need to be repeatedly administered. But, this approach has also been investigated in the field of oncology with the aim of providing immunomodulatory antibodies that are able to enhance the patient's inherent immune response against the tumor. These kind of treatments would provide the patient with the therapeutic drug produced in situ, de novo, and in a sustained way, making the therapy more comfortable.Although different devices are nowadays available to produce cell-enclosing alginate-microcapsules, here, we describe the most important steps and advices in order to fabricate alginate-poly-L-lysine-alginate microcapsules containing hybridoma cells for cancer management using an electrostatic bead generator, and how to evaluate the viability of those cells over the time.

Nanocomposite Hydrogels and Their Applications in Tissue Engineering

Nanocomposite (NC) hydrogels, organic-inorganic hybrid materials, are of great interest as artificial three-dimensional (3D) biomaterials for biomedical applications. NC hydrogels are prepared in water by chemically or physically cross-linking organic polymers with nanomaterials (NMs). The incorporation of hard inorganic NMs into the soft organic polymer matrix enhances the physical, chemical, and biological properties of NC hydrogels. Therefore, NC hydrogels are excellent candidates for artificial 3D biomaterials, particularly in tissue engineering applications, where they can mimic the chemical, mechanical, electrical, and biological properties of native tissues. A wide range of functional NMs and synthetic or natural organic polymers have been used to design new NC hydrogels with novel properties and tailored functionalities for biomedical uses. Each of these approaches can improve the development of NC hydrogels and, thus, provide advanced 3D biomaterials for biomedical applications.

Recent advances in engineered chitosan-based nanogels for biomedical applications

Recent progress in the preparation and biomedical applications of engineered chitosan-based nanogels has been comprehensively reviewed.

Applications of Cell Microencapsulation

The goal of this chapter is to provide an overview of the different purposes for which the cell microencapsulation technology can be used. These include immunoisolation of non-autologous cells used for cell therapy; immobilization of cells for localized (targeted) delivery of therapeutic products to ablate, repair, or regenerate tissue; simultaneous delivery of multiple therapeutic agents in cell therapy; spatial compartmentalization of cells in complex tissue engineering; expansion of cells in culture; and production of different probiotics and metabolites for industrial applications. For each of these applications, specific examples are provided to illustrate how the microencapsulation technology can be utilized to achieve the purpose. However, successful use of the cell microencapsulation technology for whatever purpose will ultimately depend upon careful consideration for the choice of the encapsulating polymers, the method of fabrication (cross-linking) of the microbeads, which affects the permselectivity, the biocompatibility and the mechanical strength of the microbeads as well as environmental parameters such as temperature, humidity, osmotic pressure, and storage solutions.The various applications discussed in this chapter are illustrated in the different chapters of this book and where appropriate relevant images of the microencapsulation products are provided. It is hoped that this outline of the different applications of cell microencapsulation would provide a good platform for tissue engineers, scientists, and clinicians to design novel tissue constructs and products for therapeutic and industrial applications.

Bioinks for biofabrication: current state and future perspectives

Recent progress in 3D printing technologies is leading a revolution in cell culture methods. These systems rely heavily on bioinks, the raw cells and biomaterials used to create these 3D cultures. These formulations, ranging from cell suspensions to hard acellular thermoplastics, must function with 3D systems and offer biocompatible environments that mimic in vivo tissue characteristics. Although much progress has been made for the production of increasingly complex reproducible 3D tissues, a full biofabrication platform with both improved technology and superior bioinks must be developed. Here, important properties for these materials are examined; recent advances in bioinks are summarized; and finally, future considerations for 3D biofabrication are discussed.

Cationic nioplexes-in-polysaccharide-based hydrogels as versatile biodegradable hybrid materials to deliver nucleic acids

Two polysaccharide-based hydrogels made of only κ-carrageenan (4%; w/v) or of a mixture of methylcellulose:κ-carrageenan (2%; w/v) were used to encapsulate cationic nioplexes.

Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?

Tissue engineering is a promising alternative to autografts or allografts for the regeneration of large bone defects. Cell-free biomaterials with different degrees of sophistication can be used for several therapeutic indications, to stimulate bone repair by the host tissue. However, when osteoprogenitors are not available in the damaged tissue, exogenous cells with an osteoblast differentiation potential must be provided. These cells should have the capacity to colonize the defect and to participate in the building of new bone tissue. To achieve this goal, cells must survive, remain in the defect site, eventually proliferate, and differentiate into mature osteoblasts. A critical issue for these engrafted cells is to be fed by oxygen and nutrients: the transient absence of a vascular network upon implantation is a major challenge for cells to survive in the site of implantation, and different strategies can be followed to promote cell survival under poor oxygen and nutrient supply and to promote rapid vascularization of the defect area. These strategies involve the use of scaffolds designed to create the appropriate micro-environment for cells to survive, proliferate, and differentiate in vitro and in vivo. Hydrogels are an eclectic class of materials that can be easily cellularized and provide effective, minimally invasive approaches to fill bone defects and favor bone tissue regeneration. Furthermore, by playing on their composition and processing, it is possible to obtain biocompatible systems with adequate chemical, biological, and mechanical properties. However, only a good combination of scaffold and cells, possibly with the aid of incorporated growth factors, can lead to successful results in bone regeneration. This review presents the strategies used to design cellularized hydrogel-based systems for bone regeneration, identifying the key parameters of the many different micro-environments created within hydrogels.

Bio-inks for 3D bioprinting: recent advances and future prospects

In the last decade, interest in the field of three-dimensional (3D) bioprinting has increased enormously. This review describes all the currently used bio-printing inks, including polymeric hydrogels, polymer bead microcarriers, cell aggregates and extracellular matrix proteins.

Bioencapsulation technologies in tissue engineering

Bioencapsulation technologies have played an important role in the developing successes of tissue engineering. Besides offering immunoisolation, they also show promise for cell/tissue banking and the directed differentiation of stem cells, by providing a unique microenvironment. This review describes bioencapsulation technologies and summarizes their recent progress in research into tissue engineering. The review concludes with a brief outlook regarding future research directions in this field.

Three-Dimensional Stem Cell Bioprinting

Stem cells have become a revived biotechnology that is beginning to expand the field of regenerative medicine. Although stem cells are capable of regenerating tissues, current research trends tend to side on developing fully functional organs and other clinical uses including in situ stem cell repair through three-dimensional printing methods. Through several tests and techniques, it can be shown that most stem cell printing methods are possible and that most tests come out with high cell viability. Furthermore, the importance of bioprinting is to benefit the field of regenerative medicine, which looks into artificial organ transplants for the thousands of patients without donors. Although the field is not brand new, understanding the integration and use of additive manufacturing with biomaterials is essential in developing fully functional organs. There is a heavy emphasis on the biomaterials themselves since they have a crucial role in creating an organ that is mechanically robust and adaptable in vivo. Covered in this review article are many featured tests, which also touch on the importance of including a biomaterial that is capable of maintaining a viable microenvironment. These include biomaterials such as hydrogels, biopolymers, and synthetic extra cellular matrices (ECM) built for stem cells to proliferate, differentiate, and give freedom to cell communication after printing.

Nanomaterials for Cardiac Myocyte Tissue Engineering

Since their synthesizing introduction to the research community, nanomaterials have infiltrated almost every corner of science and engineering. Over the last decade, one such field has begun to look at using nanomaterials for beneficial applications in tissue engineering, specifically, cardiac tissue engineering. During a myocardial infarction, part of the cardiac muscle, or myocardium, is deprived of blood. Therefore, the lack of oxygen destroys cardiomyocytes, leaving dead tissue and possibly resulting in the development of arrhythmia, ventricular remodeling, and eventual heart failure. Scarred cardiac muscle results in heart failure for millions of heart attack survivors worldwide. Modern cardiac tissue engineering research has developed nanomaterial applications to combat heart failure, preserve normal heart tissue, and grow healthy myocardium around the infarcted area. This review will discuss the recent progress of nanomaterials for cardiovascular tissue engineering applications through three main nanomaterial approaches: scaffold designs, patches, and injectable materials.

Elastin-like polypeptides: the power of design for smart cell encapsulation

INTRODUCTION

Cell encapsulation technology is still a challenging issue. Innovative methodologies such as additive manufacturing, and alternative bioprocesses, such as cell therapeutic delivery, where cell encapsulation is a key tool are rapidly gaining importance for their potential in regenerative medicine. Responsive materials such as elastin-based recombinant expression products have features that are particularly attractive for cell encapsulation. They can be designed and tailored to meet desired requirements. Thus, they represent promising candidates for the development of new concept-based materials that can be employed in this field. Areas covered: An overview of the design and employment of elastin-like polypeptides for cell encapsulation is given to outline the state of the art. Special attention is paid to the design of the macromolecule employed as well as to the method of matrix formation and the biological system involved. Expert opinion: As a result of recent progress in regenerative medicine there is a compelling need for materials that provide specific properties and demonstrate defined functional features. Rationally designed materials that may adapt according to applied external stimuli and that are responsive to biological systems, such as elastin-like polypeptides, belong to this class of smart material. A run through the components described to date represents a good starting point for further advancement in this area. Employment of these components in cell encapsulation application will promote its advance toward 'smart cell encapsulation technology'.

Design Advances in Particulate Systems for Biomedical Applications

The search for more efficient therapeutic strategies and diagnosis tools is a continuous challenge. Advances in understanding the biological mechanisms behind diseases and tissues regeneration have widened the field of applications of particulate systems. Particles are no more just protective systems for the encapsulated drugs, but they play an active role in the success of the therapy. Moreover, particles have been explored for innovative purposes as templates for cells growth and as diagnostic tools. Until few years ago the most relevant parameters in particles formulation were the chemistry and the size. Currently, it is known that other physical characteristics can remarkably affect the performance of particulate systems. Particles with non-conventional shapes exhibit advantages due to the increasing circulation time in blood stream, less clearance by the immune system and more efficient cell internalization and trafficking. Creation of compartments has been found useful to control drug release, to tune the transport of substances across biological barriers, to supply the target with more than one bioactive agent or even to act as theranostic systems. It is expected that such complex shaped and compartmentalized systems improve the therapeutic outcomes and also the patient's compliance, acting as advanced devices that serve for simultaneous diagnosis and treatment of the disease, combining agents of very different features, at the same time. In this review, we overview and analyse the most recent advances in particle shape and compartmentalization and applications of newly designed particulate systems in the biomedical field.

Living Cell Factories - Electrosprayed Microcapsules and Microcarriers for Minimally Invasive Delivery

Minimally invasive delivery of "living cell factories" consisting of cells and therapeutic agents has gained wide attention for next generation biomaterial device systems for multiple applications including musculoskeletal tissue regeneration, diabetes and cancer. Cellular-based microcapsules and microcarrier systems offer several attractive features for this particular purpose. One such technology capable of generating these types of systems is electrohydrodynamic (EHD) spraying. Depending on various parameters, including applied voltage, biomaterial properties (viscosity, conductivity) and needle geometry, complex structures and arrangements can be fabricated for therapeutic strategies. The advances in the use of EHD technology are outlined, specifically in the manipulation of bioactive and dynamic material systems to control size, composition and configuration in the development of minimally invasive micro-scaled biopolymeric systems. The exciting therapeutic applications of this technology, future perspectives and associated challenges are also presented.

Contribution of polymeric materials to progress in xenotransplantation of microencapsulated cells: a review

Cell microencapsulation and subsequent transplantation of the microencapsulated cells require multidisciplinary approaches. Physical, chemical, biological, engineering, and medical expertise has to be combined. Several natural and synthetic polymeric materials and different technologies have been reported for the preparation of hydrogels, which are suitable to protect cells by microencapsulation. However, owing to the frequent lack of adequate characterization of the hydrogels and their components as well as incomplete description of the technology, many results of in vitro and in vivo studies appear contradictory or cannot reliably be reproduced. This review addresses the state of the art in cell microencapsulation with special focus on microencapsulated cells intended for xenotransplantation cell therapies. The choice of materials, the design and fabrication of the microspheres, as well as the conditions to be met during the cell microencapsulation process, are summarized and discussed prior to presenting research results of in vitro and in vivo studies. Overall, this review will serve to sensitize medically educated specialists for materials and technological aspects of cell microencapsulation.

Bioprinting Organotypic Hydrogels with Improved Mesenchymal Stem Cell Remodeling and Mineralization Properties for Bone Tissue Engineering

3D-manufactured hydrogels with precise contours and biological adhesion motifs are interesting candidates in the regenerative medicine field for the culture and differentiation of human bone-marrow-derived mesenchymal stem cells (MSCs). 3D-bioprinting is a powerful technique to approach one step closer the native organization of cells. This study investigates the effect of the incorporation of collagen type I in 3D-bioprinted polysaccharide-based hydrogels to the modulation of cell morphology, osteogenic remodeling potential, and mineralization. By combining thermo-responsive agarose hydrogels with collagen type I, the mechanical stiffness and printing contours of printed constructs can be improved compared to pure collagen hydrogels which are typically used as standard materials for MSC osteogenic differentiation. The results presented here show that MSC not only survive the 3D-bioprinting process but also maintain the mesenchymal phenotype, as proved by live/dead staining and immunocytochemistry (vimentin positive, CD34 negative). Increased solids concentrations of collagen in the hydrogel blend induce changes in cell morphology, namely, by enhancing cell spreading, that ultimately contribute to enhanced and directed MSC osteogenic differentiation. 3D-bioprinted agarose-collagen hydrogels with high-collagen ratio are therefore feasible for MSC osteogenic differentiation, contrarily to low-collagen blends, as proved by two-photon microscopy, Alizarin Red staining, and real-time polymerase chain reaction.

Coating Strategies Using Layer-by-layer Deposition for Cell Encapsulation

The layer-by-layer (LbL) deposition technique is widely used to develop multilayered films based on the directed assembly of complementary materials. In the last decade, thin multilayers prepared by LbL deposition have been applied in biological fields, namely, for cellular encapsulation, due to their versatile processing and tunable properties. Their use was suggested as an alternative approach to overcome the drawbacks of bulk hydrogels, for endocrine cells transplantation or tissue engineering approaches, as effective cytoprotective agents, or as a way to control cell division. Nanostructured multilayered materials are currently used in the nanomodification of the surfaces of single cells and cell aggregates, and are also suitable as coatings for cell-laden hydrogels or other biomaterials, which may later be transformed to highly permeable hollow capsules. In this Focus Review, we discuss the applications of LbL cell encapsulation in distinct fields, including cell therapy, regenerative medicine, and biotechnological applications. Insights regarding practical aspects required to employ LbL for cell encapsulation are also provided.

Multilayered polycaprolactone/gelatin fiber-hydrogel composite for tendon tissue engineering

Regeneration of injured tendon and ligament (T&L) remains a clinical challenge due to their poor intrinsic healing capacity. Tissue engineering provides a promising alternative treatment approach to facilitate T&L healing and regeneration. Successful tendon tissue engineering requires the use of three-dimensional (3D) biomimetic scaffolds that possess the physical and biochemical features of native tendon tissue. We report here the development and characterization of a novel composite scaffold fabricated by co-electrospinning of poly-ε-caprolactone (PCL) and methacrylated gelatin (mGLT). We found that photocrosslinking retained mGLT, resulted in a uniform distribution of mGLT throughout the depth of scaffold and also preserved scaffold mechanical strength. Moreover, photocrosslinking was able to integrate stacked scaffold sheets to form multilayered constructs that mimic the structure of native tendon tissues. Importantly, cells impregnated into the constructs remained responsive to topographical cues and exogenous tenogenic factors, such as TGF-β3. The excellent biocompatibility and highly integrated structure of the scaffold developed in this study will allow the creation of a more advanced tendon graft that possesses the architecture and cell phenotype of native tendon tissues.

STATEMENT OF SIGNIFICANCE

The clinical challenges in tendon repair have spurred the development of tendon tissue engineering approaches to create functional tissue replacements. In this study, we have developed a novel composite scaffold as a tendon graft consisting of aligned poly-ε-caprolactone (PCL) microfibers and methacrylated gelatin (mGLT). Cell seeding and photocrosslinking between scaffold layers can be performed simultaneously to create cell impregnated multilayered constructs. This cell-scaffold construct combines the advantages of PCL nanofibrous scaffolds and photocrosslinked gelatin hydrogels to mimic the structure, mechanical anisotropy, and cell phenotype of native tendon tissue. The scaffold engineered here as a building block for multilayer constructs should have applications beyond tendon tissue engineering in the fabrication of tissue grafts that consist of both fibrous and hydrogel components.

Robust and Biocompatible Hybrid Matrix with Controllable Permeability for Microalgae Encapsulation

Hybrid beads with entrapped microalgae Chlamydomonas reinhardtii were synthesized for the sustainable production of high value metabolites via photosynthesis. Encapsulating the microalgae requires an exquisite control of material properties, which has been achieved by modifying the composition (alginate, polycation, and silica). A coating of PDADMAC precluded cell leakage as indicated by the OD750 value of the culture medium, and the homogeneous distribution of silica prevented bead shrinkage from the strong electronic force of PDADMAC, resulting in a robust and biocompatible matrix for the cells. Besides fabricating suitable porous beads for the diffusion of expected metabolites, the permeability can be controlled to a certain degree by applying different molecular weights of PDADMAC. The hybrid alginate+silica/CaCl2+PDADMAC beads possessed sufficient mechanical rigidity to sheer force under constant stirring and good chemical stability to chelating agents such as sodium citrate. Moreover, the encapsulated cells exhibited excellent long-term viability and cellular functionality, which retained about 81.5% of the original value after a 120 day encapsulation as observed by microscopy and oximetry measurement. This study is not only significant for understanding the critical role of polycations and silica involved in the synthesis of hybrid beads but also important for real-scale bioengineering applications.

Improved Water Barrier Properties of Calcium Alginate Capsules Modified by Silicone Oil

Calcium alginate films generally offer poor diffusion resistance to water. In this study, we present a technique for encapsulating aqueous drops in a modified calcium alginate membrane made from an emulsion of silicone oil and aqueous alginate solution and explore its effect on the loss of water from the capsule cores. The capsule membrane storage modulus increases as the initial concentration of oil in the emulsion is increased. The water barrier properties of the fabricated capsules were determined by observing the mass loss of capsules in a controlled environment. It was found that capsules made with emulsions containing 50 wt% silicone oil were robust while taking at least twice the time to dry completely as compared to capsules made from only an aqueous alginate solution. The size of the oil droplets in the emulsion also has an effect on the water barrier properties of the fabricated capsules. This study demonstrates a facile method of producing aqueous core alginate capsules with a modified membrane that improves the diffusion resistance to water and can have a wide range of applications.

Extracellular matrix components supporting human islet function in alginate-based immunoprotective microcapsules for treatment of diabetes

In the pancreas, extracellular matrix (ECM) components play an import role in providing mechanical and physiological support, and also contribute to the function of islets. These ECM-connections are damaged during islet-isolation from the pancreas and are not fully recovered after encapsulation and transplantation. To promote the functional survival of human pancreatic islets, we tested different ECMs molecules in alginate-encapsulated human islets. These were laminin derived recognition sequences, IKVAV, RGD, LRE, PDSGR, collagen I sequence DGEA (0.01 - 1.0 mM), and collagen IV (50 - 200 µg/mL). Interaction with RGD and PDSGR promoted islet viability and glucose induced insulin secretion (GIIS) when it was applied at concentrations ranging from 0.01 - 1.0 mM (p < 0.05). Also the laminin sequence LRE contributed to enhanced GIIS but only at higher concentrations of 1 mM (p < 0.05). Collagen IV also had beneficial effects but only at 50 µg/ml and no further improvement was observed at higher concentrations. IKVAV and DGEA had no effects on human islets. Synergistic effects were observed by adding Collagen(IV)-RGD, Collagen(IV)-LRE, and Collagen(IV)-PDSGR to encapsulated human islets. Our results demonstrate the potential of specific ECM components in support of functional survival of human encapsulated and free islet grafts. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 1788-1796, 2016.

Sundew adhesive: a naturally occurring hydrogel

Bioadhesives have drawn increasing interest in recent years, owing to their eco-friendly, biocompatible and biodegradable nature. As a typical bioadhesive, sticky exudate observed on the stalked glands of sundew plants aids in the capture of insects and this viscoelastic adhesive has triggered extensive interests in revealing the implied adhesion mechanisms. Despite the significant progress that has been made, the structural traits of the sundew adhesive, especially the morphological characteristics in nanoscale, which may give rise to the viscous and elastic properties of this mucilage, remain unclear. Here, we show that the sundew adhesive is a naturally occurring hydrogel, consisting of nano-network architectures assembled with polysaccharides. The assembly process of the polysaccharides in this hydrogel is proposed to be driven by electrostatic interactions mediated with divalent cations. Negatively charged nanoparticles, with an average diameter of 231.9 ± 14.8 nm, are also obtained from this hydrogel and these nanoparticles are presumed to exert vital roles in the assembly of the nano-networks. Further characterization via atomic force microscopy indicates that the stretching deformation of the sundew adhesive is associated with the flexibility of its fibrous architectures. It is also observed that the adhesion strength of the sundew adhesive is susceptible to low temperatures. Both elasticity and adhesion strength of the sundew adhesive reduce in response to lowering the ambient temperature. The feasibility of applying sundew adhesive for tissue engineering is subsequently explored in this study. Results show that the fibrous scaffolds obtained from sundew adhesive are capable of increasing the adhesion of multiple types of cells, including fibroblast cells and smooth muscle cells, a property that results from the enhanced adsorption of serum proteins. In addition, in light of the weak cytotoxic activity exhibited by these scaffolds towards a variety of mammal cells, evidence is sufficient to propose that sundew adhesive is a promising nanomaterial worth further exploitation in the field of tissue engineering.

Marine Origin Polysaccharides in Drug Delivery Systems

Oceans are a vast source of natural substances. In them, we find various compounds with wide biotechnological and biomedical applicabilities. The exploitation of the sea as a renewable source of biocompounds can have a positive impact on the development of new systems and devices for biomedical applications. Marine polysaccharides are among the most abundant materials in the seas, which contributes to a decrease of the extraction costs, besides their solubility behavior in aqueous solvents and extraction media, and their interaction with other biocompounds. Polysaccharides such as alginate, carrageenan and fucoidan can be extracted from algae, whereas chitosan and hyaluronan can be obtained from animal sources. Most marine polysaccharides have important biological properties such as biocompatibility, biodegradability, and anti-inflammatory activity, as well as adhesive and antimicrobial actions. Moreover, they can be modified in order to allow processing them into various shapes and sizes and may exhibit response dependence to external stimuli, such as pH and temperature. Due to these properties, these biomaterials have been studied as raw material for the construction of carrier devices for drugs, including particles, capsules and hydrogels. The devices are designed to achieve a controlled release of therapeutic agents in an attempt to fight against serious diseases, and to be used in advanced therapies, such as gene delivery or regenerative medicine.

In situ formation of silk-gelatin hybrid hydrogels for affinity-based growth factor sequestration and release

Facile formation of silk fibroin/gelatin-heparin hybrid hydrogels for affinity-based growth factor sequestration and release.

Biocompatible Hydrogels for Microarray Cell Printing and Encapsulation

Conventional drug screening processes are a time-consuming and expensive endeavor, but highly rewarding when they are successful. To identify promising lead compounds, millions of compounds are traditionally screened against therapeutic targets on human cells grown on the surface of 96-wells. These two-dimensional (2D) cell monolayers are physiologically irrelevant, thus, often providing false-positive or false-negative results, when compared to cells grown in three-dimensional (3D) structures such as hydrogel droplets. However, 3D cell culture systems are not easily amenable to high-throughput screening (HTS), thus inherently low throughput, and requiring relatively large volume for cell-based assays. In addition, it is difficult to control cellular microenvironments and hard to obtain reliable cell images due to focus position and transparency issues. To overcome these problems, miniaturized 3D cell cultures in hydrogels were developed via cell printing techniques where cell spots in hydrogels can be arrayed on the surface of glass slides or plastic chips by microarray spotters and cultured in growth media to form cells encapsulated 3D droplets for various cell-based assays. These approaches can dramatically reduce assay volume, provide accurate control over cellular microenvironments, and allow us to obtain clear 3D cell images for high-content imaging (HCI). In this review, several hydrogels that are compatible to microarray printing robots are discussed for miniaturized 3D cell cultures.

Assessment of the Behavior of Mesenchymal Stem Cells Immobilized in Biomimetic Alginate Microcapsules

The combination of mesenchymal stem cells (MSCs) and biomimetic matrices for cell-based therapies has led to enormous advances, including the field of cell microencapsulation technology. In the present work, we have evaluated the potential of genetically modified MSCs from mice bone marrow, D1-MSCs, immobilized in alginate microcapsules with different RGD (Arg-Gly-Asp) densities. Results demonstrated that the microcapsules represent a suitable platform for D1-MSC encapsulation since cell immobilization into alginate matrices does not affect their main characteristics. The in vitro study showed a higher activity of D1-MSCs when they are immobilized in RGD-modified alginate microcapsules, obtaining the highest therapeutic factor secretion with low and intermediate densities of the bioactive molecule. In addition, the inclusion of RGD increased the differentiation potential of immobilized cells upon specific induction. However, subcutaneous implantation did not induce differentiation of D1-MSCs toward any lineage remaining at an undifferentiated state in vivo.