Encapsulated Mesenchymal Stromal Cells as Cyclic Providers of Immunomodulatory Secretomes: A Living on-Demand Delivery System

The stimulation of mesenchymal stromal cells (MSCs) with inflammatory molecules is often used to boost their therapeutic effect. Prolonged exposure to inflammatory molecules has been explored to improve their action because MSCs therapies seem to be improved transiently with such stimuli. However, the possibility of cyclically stimulating MSCs to recover their optimized therapeutic potential is still to be elucidated, although the efficacy of cell-based therapies may be dependent on the ability to readapt to the relapse pathological conditions. Here, the response of MSCs, encapsulated in alginate hydrogels and cultured for 22 d, is explored using three different regimes: single, continuous, and intermittent stimulation with IFNγ. Exposure to IFNγ leads to a decrease in the secretion of IL-10, which is cyclically countered by IFNγ weaning. Conditioned media collected at different stages of pulsatile stimulation show an immunomodulatory potential toward macrophages, which directly correlates with IL-10 concentration in media. To understand whether the correlation between cyclic stimulation of MSCs and other biological actions can be observed, the effect on endothelial cells is studied, showcasing an overall modest influence on tube formation. Overall, the results describe the response of encapsulated MSCs to unusual pulsatile simulation regimens, exploring encapsulated MSCs as a living on-demand release system of tailored secretomes with recoverable immunomodulatory action.

Natural Polymer-Polyphenol Bioadhesive Coacervate with Stable Wet Adhesion, Antibacterial Activity, and On-Demand Detachment

Medical adhesives are emerging as an important clinical tool as adjuvants for sutures and staples in wound closure and healing and in the achievement of hemostasis. However, clinical adhesives combining cytocompatibility, as well as strong and stable adhesion in physiological conditions, are still in demand. Herein, a mussel-inspired strategy is explored to produce adhesive coacervates using tannic acid (TA) and methacrylate pullulan (PUL-MA). TA|PUL-MA coacervates mainly comprise van der Waals forces and hydrophobic interactions. The methacrylic groups in the PUL backbone increase the number of interactions in the adhesives matrix, resulting in enhanced cohesion and adhesion strength (72.7 Jm-2 ), compared to the non-methacrylated coacervate. The adhesive properties are kept in physiologic-mimetic solutions (72.8 Jm-2 ) for 72 h. The photopolymerization of TA|PUL-MA enables the on-demand detachment of the adhesive. The poor cytocompatibility associated with the use of phenolic groups is here circumvented by mixing reactive oxygen species-degrading enzyme in the adhesive coacervate. This addition does not hamper the adhesive character of the materials, nor their anti-microbial or hemostatic properties. This affordable and straightforward methodology, together with the tailorable adhesivity even in wet environments, high cytocompatibility, and anti-bacterial activity, enables foresee TA|PUL-MA as a promising ready-to-use bioadhesive for biomedical applications.

Analysis of brazilian paintings of the 20th century: Suspects and authentics through in situ and Non-Invasive techniques

This work studied suspicious and authentic artworks by Brazilian painters Ivan Serpa, Ismael Nery, and Iberê Camargo by XRF, FTIR, OM, and MA-XRF techniques. The studies made it possible to verify that all suspicious artworks are counterfeit artifacts. The analyses were conducted in situ, and different approaches were applied for data treatment. For example, principal component analysis and spectral deconvolution were performed on the XRF data. From these methods, it was possible to verify that the suspect artworks by Ivan Serpa and Iberê Camargo have different materiality than the authentic paintings. Additionally, MA-XRF images did not reveal the presence of a polychrome preparation layer in the suspicious paintings by Ivan Serpa. The suspect artworks from Ismael Nery exhibited a Ca-K/Ti-K ratio that indicates they were created on a low-quality paper support, which is not suitable for paintings. The differences in materials used in the suspicious and authentic artworks are further supported by the FTIR and OM results. In addition to the physicochemical analysis, the paintings were studies graphotechnical examinations, financial evaluations, and artistic analyses that demonstrated they were counterfeit artifacts. The results of the analysis demonstrate how physicochemical techniques can contribute to the forensic investigation of paintings. However, this work highlights the importance of applying distinct treatments to the XRF data in order to accentuate the differences between the suspect and authentic artworks.

An Intracellular Metabolic Signature as a Potential Donor-Independent Marker of the Osteogenic Differentiation of Adipose Tissue Mesenchymal Stem Cells

This paper describes an untargeted NMR metabolomics study to identify potential intracellular donor-dependent and donor-independent metabolic markers of proliferation and osteogenic differentiation of human adipose mesenchymal stem cells (hAMSCs). The hAMSCs of two donors with distinct proliferating/osteogenic characteristics were fully characterized regarding their polar endometabolome during proliferation and osteogenesis. An 18-metabolites signature (including changes in alanine, aspartate, proline, tyrosine, ATP, and ADP, among others) was suggested to be potentially descriptive of cell proliferation, independently of the donor. In addition, a set of 11 metabolites was proposed to compose a possible donor-independent signature of osteogenesis, mostly involving changes in taurine, glutathione, methylguanidine, adenosine, inosine, uridine, and creatine/phosphocreatine, choline/phosphocholine and ethanolamine/phosphocholine ratios. The proposed signatures were validated for a third donor, although they require further validation in a larger donor cohort. We believe that this proof of concept paves the way to exploit metabolic markers to monitor (and potentially predict) cell proliferation and the osteogenic ability of different donors.

Cell Response in Free-Packed Granular Systems

The study of the interactions of living adherent cells with mechanically stable (visco)elastic materials enables understanding and exploitation of physiological phenomena mediated by cell-extracellular communication. Insights into the interaction of cells and surrounding objects with different stability patterns upon cell contact might unveil biological responses to engineer innovative applications. Here, we hypothesize that the efficiency of cell attachment, spreading, and movement across a free-packed granular bed of microparticles depends on the microparticle diameter, raising the possibility of a necessary minimum traction force for the reinforcement of cell-particle bonds and long-term cell adhesion. The results suggest that microparticles with diameters of 14-20 μm are prone to cell-mediated mobility, holding the potential of inducing early cell detachment, while objects with diameters from 38 to 85 μm enable long-lasting cell adhesion and proliferation. An in silico hybrid particle-based model that addresses the time-dependent biological mechanisms of cell adhesion is proposed, providing inspiration for engineering platforms to address healthcare-related challenges.

All-Aqueous Freeform Fabrication of Perfusable Self-Standing Soft Compartments

Compartmentalized structures obtained in all-aqueous settings have shown promising properties as cell encapsulation devices, as well as reactors for trans-membrane chemical reactions. While most approaches focus on the preparation of spherical devices, advances on the production of complex architectures have been enabled by the interfacial stability conferred by emulsion systems, namely mild aqueous two-phase systems (ATPS), or non-equilibrated analogues. However, the application of non-spherical structures has mostly been reported while keeping the fabricated materials at a stable interface, limiting the free-standing character, mobility and transposition of the obtained structures to different setups. Here, the fabrication of self-standing, malleable and perfusable tubular systems through all-aqueous interfacial assembly is shown, culminating in the preparation of independent objects with stability and homogeneity after disruption of the polymer-based aqueous separating system. Those hollow structures can be fabricated with a variety of widths, and rapidly printed as long structures at flow rates of 15 mm s^-1 . The materials are used as compartments for cell culture, showcasing high cytocompatibility, and can be tailored to promote cell adhesion. Such structures may find application in fields that benefit from freeform tubular structures, including the biomedical field with, for example, cell encapsulation, and benchtop preparation of microfluidic devices.

NMR Metabolomics Assessment of Osteogenic Differentiation of Adipose-Tissue-Derived Mesenchymal Stem Cells

This Article presents, for the first time to our knowledge, an untargeted nuclear magnetic resonance (NMR) metabolomic characterization of the polar intracellular metabolic adaptations of human adipose-derived mesenchymal stem cells during osteogenic differentiation. The use of mesenchymal stem cells (MSCs) for bone regeneration is a promising alternative to conventional bone grafts, and untargeted metabolomics may unveil novel metabolic information on the osteogenic differentiation of MSCs, allowing their behavior to be understood and monitored/guided toward effective therapies. Our results unveiled statistically relevant changes in the levels of just over 30 identified metabolites, illustrating a highly dynamic process with significant variations throughout the whole 21-day period of osteogenic differentiation, mainly involving amino acid metabolism and protein synthesis; energy metabolism and the roles of glycolysis, the tricarboxylic acid cycle, and oxidative phosphorylation; cell membrane metabolism; nucleotide metabolism (including the specific involvement of O-glycosylation intermediates and NAD⁺); and metabolic players in protective antioxidative mechanisms (such as glutathione and specific amino acids). Different metabolic stages are proposed and are supported by putative biochemical explanations for the metabolite changes observed. This work lays the groundwork for the use of untargeted NMR metabolomics to find potential metabolic markers of osteogenic differentiation efficacy.

Metabolomic Applications in Stem Cell Research: a Review

This review describes the use of metabolomics to study stem cell (SC) characteristics and function, excluding SCs in cancer research, suited to a fully dedicated text. The interest in employing metabolomics in SC research has consistently grown and emphasis is, here, given to developments reported in the past five years. This text informs on the existing methodologies and their complementarity regarding the information provided, comprising untargeted/targeted approaches, which couple mass spectrometry or nuclear magnetic resonance spectroscopy with multivariate analysis (and, in some cases, pathway analysis and integration with other omics), and more specific analytical approaches, namely isotope tracing to highlight particular metabolic pathways, or in tandem microscopic strategies to pinpoint characteristics within a single cell. The bulk of this review covers the existing applications in various aspects of mesenchymal SC behavior, followed by pluripotent and neural SCs, with a few reports addressing other SC types. Some of the central ideas investigated comprise the metabolic/biological impacts of different tissue/donor sources and differentiation conditions, including the importance of considering 3D culture environments, mechanical cues and/or media enrichment to guide differentiation into specific lineages. Metabolomic analysis has considered cell endometabolomes and exometabolomes (fingerprinting and footprinting, respectively), having measured both lipid species and polar metabolites involved in a variety of metabolic pathways. This review clearly demonstrates the current enticing promise of metabolomics in significantly contributing towards a deeper knowledge on SC behavior, and the discovery of new biomarkers of SC function with potential translation to in vivo clinical practice.

One-Step All-Aqueous Interfacial Assembly of Robust Membranes for Long-Term Encapsulation and Culture of Adherent Stem/Stromal Cells

The therapeutic effectiveness and biological relevance of technologies based on adherent cells depend on platforms that enable long-term culture in controlled environments. Liquid-core capsules have been suggested as semipermeable moieties with spatial homogeneity due to the high mobility of all components in their core. The lack of cell-adhesive sites in liquid-core structures often hampers their use as platforms for stem cell-based technologies for long-term survival and cell-directed self-organization. Here, the one-step fast formation of robust polymeric capsules formed by interfacial complexation of oppositely charged polyelectrolytes in an all-aqueous environment, compatible with the simultaneous encapsulation of mesenchymal stem/stromal cells (MSCs) and microcarriers, is described. The adhesion of umbilical cord MSCs to polymeric microcarriers enables their aggregation and culture for more than 21 days in capsules prepared either manually by dropwise addition, or by scalable electrohydrodynamic atomization, generating robust and stable capsules. Cell aggregation and secretion overtime can be tailored by providing cells with static or dynamic (bioreactor) environments.

Engineering Strategies for Allogeneic Solid Tissue Acceptance

Advances in allogeneic transplantation of solid organs and tissues depend on our understanding of mechanisms that mediate the prevention of graft rejection. For the past decades, clinical practice has established guidelines to prevent allograft rejection, which mostly rely on the intake of nontargeted immunosuppressants as the gold standard. However, such lifelong regimens have been reported to trigger severe morbidities and commonly fail in preventing late allograft loss. In this review, the biology of allogeneic rejection and self-tolerance is analyzed, as well as the mechanisms of cellular-based therapeutics driving suppression and/or tolerance. Bioinspired engineering strategies that take advantage of cells, biomaterials, or combinations thereof to prevent allograft rejection are addressed, as well as biological mechanisms that drive their efficacy.

Fabrication of Quasi-2D Shape-Tailored Microparticles using Wettability Contrast-Based Platforms

The ability to fabricate materials with ultrathin architectures enables the breakthrough of low-dimensional structures with high surface area that showcase distinctive properties from their bulk counterparts. They are exploited in a wide range of fields, including energy harvesting, catalysis, and biomedicine. Despite such versatility, the fine tuning of the lateral dimensions and geometry of these structures remains challenging. Prepatterned platforms gain significant attention as enabling technologies to process materials with highly controlled shapes and dimensions. Herein, different nanometer-thick particles of various lateral sizes and geometries (e.g., squares, circles, triangles, hexagons) are processed with high precision and definition, taking advantage of the wettability contrast of oleophilic-oleophobic patterned surfaces. Quasi-2D polymeric microparticles with high shape- and size-fidelity can be retrieved as freestanding objects in a single step. These structures show cell-mediated pliability, and their integration in gravity-enforced human adipose-derived stem cell spheroids leads to an enhanced metabolic activity and a modulated secretion of proangiogenic factors.

Synthesis and characterization of scaffolds produced under mild conditions based on oxidized cashew gums and carboxyethyl chitosan

This study describes the development of scaffolds based on carboxyethyl chitosan (CEC) and different oxidized cashew gums (CGOx) for tissue engineering (TE) applications. After the physico-chemical characterizations of CEC and CGOx (oxidation degree of 20, 35 and 50%), these macromolecules were used for producing the CGOx-CEC hydrogels through a Schiff base reaction, in the absence of any crosslinking agent. The CGOx-CEC scaffolds obtained after a freeze-drying process were characterized for their morphology, mechanical properties, swelling ability, degradation, and porosity. Those revealed to be highly porous (25-65%), and showed a stable swelling behavior, as well as degradation properties in the absence of enzymes. The use of the cashew gum with higher degree of oxidation led to scaffolds with higher crosslinking densities and increased compressive modulus. None of the hydrogels show cytotoxicity during the 14 days of incubation. Considering all the properties mentioned, these scaffolds are excellent candidates for soft tissue regeneration, owing to the use of eco-friendly starting materials and the easy tuning of their properties.

Recent advances in the design of implantable insulin secreting heterocellular islet organoids

Islet transplantation has proved one of the most remarkable transmissions from an experimental curiosity into a routine clinical application for the treatment of type I diabetes (T1D). Current efforts for taking this technology one-step further are now focusing on overcoming islet donor shortage, engraftment, prolonged islet availability, post-transplant vascularization, and coming up with new strategies to eliminate lifelong immunosuppression. To this end, insulin secreting 3D cell clusters composed of different types of cells, also referred as heterocellular islet organoids, spheroids, or pseudoislets, have been engineered to overcome the challenges encountered by the current islet transplantation protocols. β-cells or native islets are accompanied by helper cells, also referred to as accessory cells, to generate a cell cluster that is not only able to accurately secrete insulin in response to glucose, but also superior in terms of other key features (e.g. maintaining a vasculature, longer durability in vivo and not necessitating immunosuppression after transplantation). Over the past decade, numerous 3D cell culture techniques have been integrated to create an engineered heterocellular islet organoid that addresses current obstacles. Here, we first discuss the different cell types used to prepare heterocellular organoids for islet transplantation and their contribution to the organoids design. We then introduce various cell culture techniques that are incorporated to prepare a fully functional and insulin secreting organoids with select features. Finally, we discuss the challenges and present a future outlook for improving clinical outcomes of islet transplantation.

Strategies for re-vascularization and promotion of angiogenesis in trauma and disease

The maintenance of a healthy vascular system is essential to ensure the proper function of all organs of the human body. While macrovessels have the main role of blood transportation from the heart to all tissues, microvessels, in particular capillaries, are responsible for maintaining tissues' functionality by providing oxygen, nutrients and waste exchanges. Occlusion of blood vessels due to atherosclerotic plaque accumulation remains the leading cause of mortality across the world. Autologous vein and artery grafts bypassing are the current gold standard surgical procedures to substitute primarily obstructed vascular structures. Ischemic scenarios that condition blood supply in downstream tissues may arise from blockage phenomena, as well as from other disease or events leading to trauma. The (i) great demand for new vascular substitutes, arising from both the limited availability of healthy autologous vessels, as well as the shortcomings associated with small-diameter synthetic vascular grafts, and (ii) the challenging induction of the formation of adequate and stable microvasculature are current driving forces for the growing interest in the development of bioinspired strategies to ensure the proper function of vasculature in all its dimensional scales. Here, a critical review of well-established technologies and recent biotechnological advances to substitute or regenerate the vascular system is provided.

Leachable-Free Fabrication of Hydrogel Foams Enabling Homogeneous Viability of Encapsulated Cells in Large-Volume Constructs

The popularity of cell-laden injectable hydrogels has steeply increased due to their compatibility with minimally invasive surgical procedures. However, the diffusion of indispensable molecules for cell survival through bulk hydrogel structures, particularly oxygen, is often limited to micrometric distances, often hampering cell viability or uniform tissue formation in constructs with clinically relevant sizes. The introduction of micropores in hydrogels or the use of oxygen-generating materials has enabled combining advantages of porous 3D scaffolds with the injectability properties of in situ-solidifying hydrogels. Here, cell-laden injectable gelatin methacryloyl (GelMA) foams are fabricated using a single polymer formulation. Air bubbles are introduced into GelMA solutions using a simple-to-implement method based on pulling/pushing the solution through a syringe. Human mesenchymal stem cells derived from the adipose tissue (hASCs) cultured in bulk hydrogels (diameter c.a. 5 mm) show low permanence in the core of the materials and stain for factors associated to hypoxia (hypoxia-inducible factor-1 alpha (HIF-1α)) after 7 days of culture. In opposition, cells cultured in optimized foams do not stain for HIF-1α, show high permanence, homogeneous viability, and consistent phenotype in the whole depth of the biomaterials, while secreting increased amounts of regenerative growth factors to the surrounding medium.

Advanced Bottom-Up Engineering of Living Architectures

Bottom-up tissue engineering is a promising approach for designing modular biomimetic structures that aim to recapitulate the intricate hierarchy and biofunctionality of native human tissues. In recent years, this field has seen exciting progress driven by an increasing knowledge of biological systems and their rational deconstruction into key core components. Relevant advances in the bottom-up assembly of unitary living blocks toward the creation of higher order bioarchitectures based on multicellular-rich structures or multicomponent cell-biomaterial synergies are described. An up-to-date critical overview of long-term existing and rapidly emerging technologies for integrative bottom-up tissue engineering is provided, including discussion of their practical challenges and required advances. It is envisioned that a combination of cell-biomaterial constructs with bioadaptable features and biospecific 3D designs will contribute to the development of more robust and functional humanized tissues for therapies and disease models, as well as tools for fundamental biological studies.

One-Step Rapid Fabrication of Cell-Only Living Fibers

Cellular aggregates are used as relevant regenerative building blocks, tissue models, and cell delivery platforms. Biomaterial-free structures are often assembled either as 2D cell sheets or spherical microaggregates, both incompatible with free-form deposition, and dependent on challenging processes for macroscale 3D upscaling. The continuous and elongated nature of fiber-shaped materials enables their deposition in unrestricted multiple directions. Cellular fiber fabrication has often required exogenously provided support proteins and/or the use of biomaterial-based sacrificial templates. Here, the rapid (<24 h) assembly of fiberoids is reported: living centimeter-long scaffold-free fibers of cells produced in the absence of exogenous materials or supplements. Adipose-derived mesenchymal stem cell fiberoids can be easily modulated into complex multidimensional geometries and show tissue-invasive properties while keeping the secretion of trophic factors. Proangiogenic properties studied on a chick chorioallantoic membrane in an ovo model are observed for heterotypic fiberoids containing endothelial cells. These micro-to-macrotissues may find application as morphogenic therapeutic and tissue-mimetic building blocks, with the ability to integrate 3D and 4D full biological materials.

Association between IL1A and IL1B polymorphisms and primary open angle glaucoma in a Brazilian population

Abstract

The aim of this study was to investigate the association of five polymorphisms in the IL1A and IL1B genes in Brazilian patients with primary open angle glaucoma (POAG). A case–control study, including 214 unrelated POAG patients and 187 healthy individuals, was conducted to evaluate the frequency of polymorphisms in the IL1A and IL1B genes. Ophthalmic evaluation was performed and genomic DNA was obtained from all participants. Five single nucleotide polymorphisms (SNPs): IL1A (–889C/T: rs1800587:C > T, +4845G/T:rs17561G>T) and IL1B (–31C/T:rs1143627:T > C, –511C/T:rs16944C>T and +3954C/T:rs1143634:C > T) were genotyped through direct sequencing. The association of individual SNPs was tested using logistic regression. There was an association between the –31C/T and –511 C/T polymorphisms in the IL1B gene with POAG (p = 0.002 and p = 0.009, respectively). High linkage disequilibrium was observed between the –31C/T and –511C/T polymorphisms. The statistical analysis showed that the T/C haplotype (–31/–511) in the IL1B gene is more frequent in controls (p = 0.011) and the C/T haplotype (–31/–511) is more common in POAG patients (p = 0.018). Among POAG cases, the genotypic distribution of the –31C/T and –511 C/T SNPs was significantly different in patients who underwent anti-glaucomatous surgery compared to patients without surgery (p = 0.016 and 0.023, respectively). There was no statistically significant difference for the remaining SNPs between POAG patients and controls. In conclusion, the C allele of the –31C/T and the T allele of the –511C/T polymorphisms in the IL1B gene may represent a “risk haplotype” for the development of POAG in Brazilian individuals. Further studies with larger cohorts of patients are necessary to substantiate these findings.

Bone physiology as inspiration for tissue regenerative therapies

The development, maintenance of healthy bone and regeneration of injured tissue in the human body comprise a set of intricate and finely coordinated processes. However, an analysis of current bone regeneration strategies shows that only a small fraction of well-reported bone biology aspects has been used as inspiration and transposed into the development of therapeutic products. Specific topics that include inter-scale bone structural organization, developmental aspects of bone morphogenesis, bone repair mechanisms, role of specific cells and heterotypic cell contact in the bone niche (including vascularization networks and immune system cells), cell-cell direct and soluble-mediated contact, extracellular matrix composition (with particular focus on the non-soluble fraction of proteins), as well as mechanical aspects of native bone will be the main reviewed topics. In this Review we suggest a systematic parallelization of (i) fundamental well-established biology of bone, (ii) updated and recent advances on the understanding of biological phenomena occurring in native and injured tissue, and (iii) critical discussion of how those individual aspects have been translated into tissue regeneration strategies using biomaterials and other tissue engineering approaches. We aim at presenting a perspective on unexplored aspects of bone physiology and how they could be translated into innovative regeneration-driven concepts.

Sequentially Moldable and Bondable Four-Dimensional Hydrogels Compatible with Cell Encapsulation

Hydrogels have captivated the attention of several research and industry segments, including bioengineering, tissue engineering, implantable/wearable sensors and actuators, bioactive agent delivery, food processing, and industrial processes optimization. A common limitation of these systems is their fixed shape. The concept of hydrogel moldability is often assigned to the injectability potential of liquid precursors, and this feature is often lost right after hydrogel formation. Hydrogel modulation is a recent trend that advocates the importance of designing materials with shape fitting ability targeting on-demand responses or defect filling purposes. Here, we present a compliant and cell encapsulation-compatible hydrogel prepared from unmodified natural origin polymers with the ability to undergo extreme sequential shape alterations with high recovery of its mechanical properties. Different fragments of these hydrogels could be bonded together in spatiotemporally controlled shape- and formulation-morphing structures. This material is prepared with affordable off-the-shelf polysaccharides of natural origin using a mild and safe processing strategy based solely on polyelectrolyte complexation followed by an innovative partial coacervate compaction and dehydration step. These unique hydrogels hold potential for multifield industrial and healthcare applications. In particular, they may find application as defect filling agents or highly compliant wound healing patches for cargo release and/or cell delivery for tissue regeneration and cell-based therapies.

The influence of surface modified poly(l-lactic acid) films on the differentiation of human monocytes into macrophages

Macrophages play a crucial role in the biological performance of biomaterials, as key factors in defining the optimal inflammation-healing balance towards tissue regeneration and implant integration. Here, we investigate how different surface modifications performed on poly(l-lactic acid) (PLLA) films would influence the differentiation of human monocytes into macrophages. We tested PLLA films without modification, surface-modified by plasma treatment (pPLLA) or by combining plasma treatment with different coating materials, namely poly(l-lysine) and a series of proteins from the extracellular matrix: collagen I, fibronectin, vitronectin, laminin and albumin. While all the tested films are non-cytotoxic, differences in cell adhesion and morphology are observed. Monocyte-derived macrophages (MDM) present a more rounded shape in non-modified films, while a more elongated phenotype is observed containing filopodia-like and podosome-like structures in all modified films. No major differences are found for the expression of HLA-DR⁺/CD80⁺ and CD206⁺/CD163⁺ surface markers, as well as for the ability of MDM to phagocytize. Interestingly, MDM differentiated on pPLLA present the highest expression of MMP9. Upon differentiation, MDM in all surface modified films present lower amounts of IL-6 and IL-10 compared to non-modified films. After stimulating MDM with the potent pro-inflammatory agent LPS, pPLLA and poly(l-lysine) and fibronectin-modified films reveal a significant reduction in IL-6 secretion, while the opposite effect is observed with IL-10. Of note, in comparison to non-modified films, all surface modified films induce a significant reduction of the IL-6/IL-10 ratio, a valuable prognosticator of the pro- versus anti-inflammatory balance. These findings provide important insights into MDM-biomaterial interactions, while strengthening the need for designing immune-informed biomaterials.

The effects of platelet lysate patches on the activity of tendon-derived cells

Platelet-derived biomaterials are widely explored as cost-effective sources of therapeutic factors, holding a strong potential for endogenous regenerative medicine. Particularly for tendon repair, treatment approaches that shift the injury environment are explored to accelerate tendon regeneration. Herein, genipin-crosslinked platelet lysate (PL) patches are proposed for the delivery of human-derived therapeutic factors in patch augmentation strategies aiming at tendon repair. Developed PL patches exhibited a controlled release profile of PL proteins, including bFGF and PDGF-BB. Additionally, PL patches exhibited an antibacterial effect by preventing the adhesion, proliferation and biofilm formation by S. aureus, a common pathogen in orthopaedic surgical site infections. Furthermore, these patches supported the activity of human tendon-derived cells (hTDCs). Cells were able to proliferate over time and an up-regulation of tenogenic genes (SCX, COL1A1 and TNC) was observed, suggesting that PL patches may modify the behavior of hTDCs. Accordingly, hTDCs deposited tendon-related extracellular matrix proteins, namely collagen type I and tenascin C. In summary, PL patches can act as a reservoir of biomolecules derived from PL and support the activity of native tendon cells, being proposed as bioinstructive patches for tendon regeneration.

STATEMENT OF SIGNIFICANCE

Platelet-derived biomaterials hold great interest for the delivery of therapeutic factors for applications in endogenous regenerative medicine. In the particular case of tendon repair, patch augmentation strategies aiming at shifting the injury environment are explored to improve tendon regeneration. In this study, PL patches were developed with remarkable features, including the controlled release of growth factors and antibacterial efficacy. Remarkably, PL patches supported the activity of native tendon cells by up-regulating tenogenic genes and enabling the deposition of ECM proteins. This patch holds great potential towards simultaneously reducing post-implantation surgical site infections and promoting tendon regeneration for prospective in vivo applications.

Cell-Based Microarrays Using Superhydrophobic Platforms Patterned with Wettable Regions

The use of patterned platforms to print cellular arrays enables the high-throughput study of cell behavior under a multitude of different conditions. This rapid, cost-saving and systematic way of acquiring biologically relevant information has found application in diverse scientific and industrial fields. In an initial stage of development, platforms targeting high-throughput cellular studies were restricted to standard two-dimensional (2D) setups. The design of novel platforms compatible with three-dimensional (3D) cell culture arose after the elucidation of the extreme importance of culturing cells in matrices resembling the native extracellular matrix-cells and cell-cell interactions. This need for biomimetic environments has been established in fields like drug discovery and testing, disease model development, and regenerative medicine. Here, we provide a description of the processing of flat platforms based on wettability contrast, compatible with the high-throughput generation and study of cell response in 3D biomaterials, including cell-laden hydrogels and porous 3D scaffolds. The application of the aforementioned platforms to produce 3D microtissues, which may find application as tissue models for drug screening or as biomimetic building blocks for tissue engineering, is also addressed. In this chapter, a description of the steps for (1) high-throughput platform processing, (2) deposition of cell and biomaterial arrays, and (3) image-based results screening is provided.

Gellan gum-hydroxyapatite composite spongy-like hydrogels for bone tissue engineering

Osteoinductive biomaterials represent a promising approach to advance bone grafting. Despite promising, the combination of sustained biodegradability, mechanical strength, and biocompatibility in a unique biomaterial that can also support cell performance and bone formation in vivo is demanding. Herein, we developed gellan gum (GG)-hydroxyapatite (HAp) spongy-like hydrogels to mimic the organic (GG) and inorganic (HAp) phases of the bone. HAp was successfully introduced within the GG polymeric networks, as determined by FTIR and XRD, without compromising the thermostability of the biomaterials, as showed by TGA. The developed biomaterials showed sustained degradation, high swelling, pore sizes between 200 and 300 μm, high porosity (>90%) and interconnectivity (<60%) that was inversely proportional to the total polymeric amount and to CaCl₂ crosslinker. CaCl₂ and HAp reinforced the mechanical properties of the biomaterials from a storage modulus of 40 KPa to 70-80 KPa. This study also showed that HAp and CaCl₂ favored the bioactivity and that cells were able to adhere and spread within the biomaterials up to 21 days of culture. Overall, the possibility to tailor spongy-like hydrogels properties by including calcium as a crosslinker and by varying the amount of HAp will further contribute to understand how these features influence bone cells performance in vitro and bone formation in vivo. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 479-490, 2018.

Multilayered Films Produced by Layer-by-Layer Assembly of Chitosan and Alginate as a Potential Platform for the Formation of Human Adipose-Derived Stem Cell aggregates

The construction of multilayered films with tunable properties could offer new routes to produce biomaterials as a platform for 3D cell cultivation. In this study, multilayered films produced with five bilayers of chitosan and alginate (CHT/ALG) were built using water-soluble modified mesyl and tosyl–CHT via layer-by-layer (LbL) self-assembly. NMR results demonstrated the presences of mesyl (2.83 ppm) and tosyl groups (2.39, 7.37 and 7.70 ppm) in the chemical structure of modified chitosans. The buildup of multilayered films was monitored by quartz-crystal-microbalance (QCM-D) and film thickness was estimated using the Voigt-based viscoelastic model. QCM-D results demonstrated that CHT/ALG films constructed using mesyl or tosyl modifications (mCHT/ALG) were significantly thinner in comparison to the CHT/ALG films constructed with unmodified chitosan (p < 0.05). Adhesion analysis demonstrated that human adipose stem cells (hASCs) did not adhere to the mCHT/ALG multilayered films and formed aggregates with sizes between ca. 100–200 µm. In vitro studies on cell metabolic activity and live/dead staining suggested that mCHT/ALG multilayered films are nontoxic toward hACSs. Multilayered films produced via LbL assembly of ALG and off-the-shelf, water-soluble modified chitosans could be used as a scaffold for the 3D aggregates formation of hASCs in vitro.

Fabrication of Hydrogel Particles of Defined Shapes Using Superhydrophobic-Hydrophilic Micropatterns

High-throughput fabrication of freestanding hydrogel particles with defined geometry and size for 3D cell culture, cell screenings, and modular tissue engineering is reported. The method employs discontinuous dewetting using superhydrophobic-hydrophilic micropatterns.

Autonomous osteogenic differentiation of hASCs encapsulated in methacrylated gellan-gum hydrogels

Methacrylated gellan-gum (GG-MA) alone and combined with collagen type I (Coll) is suggested here for the first time as a cell-laden injectable biomaterial for bone regeneration. On-chip high-throughput studies allowed rapidly assessing the suitability of 15 biomaterials/media combinations for the osteodifferentiation of human adipose stem cells (hASCs). Hydrogels composed solely of GG-MA (GG100:0Coll) led hASCs from three different donors into the osteogenic lineage after 21days of cell culture, in the absence of any osteogenic or osteoconductive factors. Hydrogels containing more than 30% of Coll promoted increased cellular proliferation and led hASCs into osteogenic differentiation under basal conditions. Studies using isolated individual hydrogels - excluding eventual on-chip crosstalk - and standard biochemical assays corroborated such findings. The formation of focal adhesions of hASCs on GG100:0Coll hydrogels was verified. We hypothesize that the hydrogels osteogenic effect could be guided by mechanotransduction phenomena. Indeed, the hydrogels showed elastic modulus in ranges previously reported as osteoinductive and the inhibition of the actin-myosin contractility pathway impaired hASCs' osteodifferentiation. GG-MA hydrogels also did not promote hASCs' adipogenesis while used in basal conditions. Overall, GG-MA showed promising properties as an innovative and off-the shelf self-inducing osteogenic injectable biomaterial.

STATEMENT OF SIGNIFICANCE

Methacrylated gellan gum (GG-MA) is here suggested for the first time as a widely available polysaccharide to easily prepare hydrogels with cell adhesion properties and capability of inducing the autonomous osteogenic differentiation of human adipose-derived stem cells (hASCs). GG-MA was processed as stand-alone hydrogels or in different combinations with collage type I. All hydrogel formulations elicited the osteogenic differentiation of hASCs, independently of the addition of any osteoconductive or osteogenic stimuli, i.e. in basal/growth medium. Effective cellular adhesion to methacrylated gellan gum hydrogels in the absence of any cell-ligand peptide/protein was here proved for the first time. Moreover, we showed that the encapsulated hASCs underwent osteogenic differentiation due to a mechanotransduction phenomenon dependent on the actin-myosin contractility pathway.

Characterization and biotechnological application of recombinant xylanases from Aspergillus nidulans

Two xylanases from Aspergillus nidulans, XlnB and XlnC, were expressed in Pichia pastoris, purified and characterized. XlnB and XlnC achieved maximal activities at 60°C and pH 7.5 and at 50°C and pH 6.0, respectively. XlnB showed to be very thermostable by maintaining 50% of its original activity after 49h incubated at 50°C. XlnB had its highest activity against wheat arabinoxylan while XlnC had the best activity against beechwood xylan. Both enzymes were completely inhibited by SDS and HgCl2. Xylotriose at 1mg/ml also totally inibited XlnB activity. TLC analysis showed that the main product of beechwood xylan hydrolysis by XlnB and XlnC was xylotetraose. An additive effect was shown between XlnB and XlnC and the xylanases of two tested commercial cocktails. Sugarcane bagasse saccharification results showed that these two commercial enzymatic cocktails were able to release more glucose and xylose after supplementation with XlnB and XlnC.

Coating Strategies Using Layer-by-layer Deposition for Cell Encapsulation

The layer-by-layer (LbL) deposition technique is widely used to develop multilayered films based on the directed assembly of complementary materials. In the last decade, thin multilayers prepared by LbL deposition have been applied in biological fields, namely, for cellular encapsulation, due to their versatile processing and tunable properties. Their use was suggested as an alternative approach to overcome the drawbacks of bulk hydrogels, for endocrine cells transplantation or tissue engineering approaches, as effective cytoprotective agents, or as a way to control cell division. Nanostructured multilayered materials are currently used in the nanomodification of the surfaces of single cells and cell aggregates, and are also suitable as coatings for cell-laden hydrogels or other biomaterials, which may later be transformed to highly permeable hollow capsules. In this Focus Review, we discuss the applications of LbL cell encapsulation in distinct fields, including cell therapy, regenerative medicine, and biotechnological applications. Insights regarding practical aspects required to employ LbL for cell encapsulation are also provided.

BSA/HSA ratio modulates the properties of Ca(2+)-induced cold gelation scaffolds

An effective tissue engineering approach requires adjustment according to the target tissue to be engineered. The possibility of obtaining a protein-based formulation for the development of multivalent tunable scaffolds that can be adapted for several types of cells and tissues is explored in this work. The incremental substitution of bovine serum albumin (BSA) by human serum albumin (HSA), changing the scaffolds' hydrophilic/hydrophobic ratio, on a previously optimized scaffold formulation resulted in a set of uniform porous scaffolds with different physical properties and associated cell proliferation profile along time. There was a general trend towards an increase in hydrophilicity, swelling degree and in vitro degradation of the scaffolds with increasing replacement of BSA by HAS. The set of BSA/HSA scaffolds presented distinct values for the storage (elastic) modulus and loss factor which were similar to those described for different native tissues such as bone, cartilage, muscle, skin and neural tissue. The preferential adhesion and proliferation of skin fibroblasts on the BSA25%HSA75% and HSA100% scaffolds, as predicted by their viscoelastic properties, demonstrate that the BSA/HSA scaffold formulation is promising for the development of scaffolds that can be tuned according to the tissue to be repaired and restored.

Fabrication and characterization of Eri silk fibers-based sponges for biomedical application

Cocoon-derived semi-domesticated Eri silk fibers still lack exploitation for tissue engineering applications due to their poor solubility using conventional methods. The present work explores the ability to process cocoon fibers of non-mulberry Eri silk (Samia/Philosamia ricini) into sponges through a green approach using ionic liquid (IL)--1-buthyl-imidazolium acetate as a solvent. The formation of β-sheet structures during Eri silk/IL gelation was acquired by exposing the Eri silk/IL gels to a saturated atmosphere composed of two different solvents: (i) isopropanol/ethanol (physical stabilization) and (ii) genipin, a natural crosslinker, dissolved in ethanol (chemical crosslinking). The sponges were then obtained by freeze-drying. This approach promotes the formation of both stable and ordered non-crosslinked Eri silk fibroin matrices. Moreover, genipin-crosslinked silk fibroin sponges presenting high height recovery capacity after compression, high swelling degree and suitable mechanical properties for tissue engineering applications were produced. The incorporation of a model drug--ibuprofen--and the corresponding release study from the loaded sponges demonstrated the potential of using these matrices as effective drug delivery systems. The assessment of the biological performance of ATDC5 chondrocyte-like cells in contact with the developed sponges showed the promotion of cell adhesion and proliferation, as well as extracellular matrix production within 2 weeks of culture. Sponges' intrinsic properties and biological findings open up their potential use for biomedical applications.

STATEMENT OF SIGNIFICANCE

This work addresses the preparation and characterization of non-mulberry cocoon-derived Eri silk sponges. The insolubility of cocoons-derived non-mulberry silkworms impairs their processability and applications in the healthcare field. We used a green approach with ionic liquids to overcome the lack solubility of such silk fibers. The formation of beta-sheet structures into Eri-based sponges was physically and chemically induced. The sponges were obtained by freeze-drying. The developed structures exhibited flexibility to adapt and recover their shapes upon application and subsequent removal of load, high swelling degree, ability to load an anti-inflammatory drug and to promote its sustained release. They promoted in vitro cellular adhesion, proliferation and extracellular matrix production of a chondrocyte-like cell line, opening up their potential application for biomedical applications.

A novel hanging spherical drop system for the generation of cellular spheroids and high throughput combinatorial drug screening

We propose a novel hanging spherical drop system for anchoring arrays of droplets of cell suspension based on the use of biomimetic superhydrophobic flat substrates, with controlled positional adhesion and minimum contact with a solid substrate. By facing down the platform, it was possible to generate independent spheroid bodies in a high throughput manner, in order to mimic in vivo tumour models on the lab-on-chip scale. To validate this system for drug screening purposes, the toxicity of the anti-cancer drug doxorubicin in cell spheroids was tested and compared to cells in 2D culture. The advantages presented by this platform, such as feasibility of the system and the ability to control the size uniformity of the spheroid, emphasize its potential to be used as a new low cost toolbox for high-throughput drug screening and in cell or tissue engineering.

Bilayered silk/silk-nanoCaP scaffolds for osteochondral tissue engineering: In vitro and in vivo assessment of biological performance

Novel porous bilayered scaffolds, fully integrating a silk fibroin (SF) layer and a silk-nano calcium phosphate (silk-nanoCaP) layer for osteochondral defect (OCD) regeneration, were developed. Homogeneous porosity distribution was achieved in the scaffolds, with calcium phosphate phase only retained in the silk-nanoCaP layer. The scaffold presented compressive moduli of 0.4MPa in the wet state. Rabbit bone marrow mesenchymal stromal cells (RBMSCs) were cultured on the scaffolds, and good adhesion and proliferation were observed. The silk-nanoCaP layer showed a higher alkaline phosphatase level than the silk layer in osteogenic conditions. Subcutaneous implantation in rabbits demonstrated weak inflammation. In a rabbit knee critical size OCD model, the scaffolds firmly integrated into the host tissue. Histological and immunohistochemical analysis showed that collagen II positive cartilage and glycosaminoglycan regeneration presented in the silk layer, and de novo bone ingrowths and vessel formation were observed in the silk-nanoCaP layer. These bilayered scaffolds can therefore be promising candidates for OCD regeneration.