Protein adsorption to poly(ethylene oxide) surfaces

The effect of microgeometry, implant thickness and polyurethane chemistry on the foreign body response to subcutaneous implants

We addressed the effect of implant thickness, implant porosity, and polyurethane (PU) chemistry on angiogenesis and on the foreign body response in rats. The following materials were implanted subcutaneously for 7 weeks then excised for histologic analysis: a solid PU; a solid polyurethane with silicone and polyethylene oxide (PU-S-PEO); porous expanded polytetrafluoroethylene (ePTFE); and porous polyvinyl alcohol sponge (PVA). Two thicknesses of PU-S-PEO were compared: 300 microns (thin) and 2000 microns (thick). Foreign body capsule (FBC) thickness was much less in PU-S-PEO implants than in PU implants. In addition, FBC were thinner in thin implants than in thick implants. FBC was much more dense in solid implants than in porous implants. As compared with solid implants, porous implants (PVA and ePTFE) led to a marked increase in the number of microvessels that developed adjacent to the implant, as observed both with hematoxylin/eosin staining and with an immunohistochemical anti-endothelial stain. We conclude that the polyethylene oxide and silicone moieties in PU reduce the thickness of the subsequent FBC. In addition, thin implants lead to a thin FBC. Porous implants (PVA and ePTFE) cause more angiogenesis than solid implants. These results may have implications for the measurement of blood-derived analytes by biosensors.

Preparation of albumin preferential surfaces on poly(vinyl chloride) membranes via surface self-segregation

Poly(vinyl chlorides)-graft-[omega-stearyl-poly(ethylene oxide)] (PVC-g-SPEO), which has a poly(vinyl chloride) (PVC) backbone, poly(ethylene oxide) (PEO) side chain, and stearyl end groups, has been synthesized. Self-organizing blends of the amphiphilic comb polymer in poly(vinyl chlorides) have been examined as a means to create albumin preferential surfaces on polymer films. X-ray photoelectron spectroscopy (XPS) analysis indicates substantial surface segregation of the PVC-g-SPEO. A surface concentration of 59.9 EO wt % is achieved by the solution casting and heat treatment of a film with a bulk concentration of only 3.78 EO wt %. In the aqueous environment, the surface rearrangement of PVC-g-SPEO/PVC blend film is limited and presents a high interfacial energy and high depolar component of interfacial energy due to the "tail-like" SPEO side chain. Protein adsorption tests confirm that PVC-g-SPEO/PVC blend films absorb high levels of albumin and dramatically resist fibrinogen adsorption. Surfaces to attract and reversibly bind albumin, which might diminish the occurrence of thrombosis, inflammation, and infection, are developed by self-organizing blends of the amphiphilic comb polymer in poly(vinyl chlorides).

Inhibition of monocyte adhesion and fibrinogen adsorption on glow discharge plasma deposited tetraethylene glycol dimethyl ether

Monocytes and macrophages play important roles in host responses to implanted biomedical devices. Monocyte and macrophage interactions with biomaterial surfaces are thought to be mediated by adsorbed adhesive proteins such as fibrinogen and fibronectin. Non-fouling surfaces that minimize protein adsorption may therefore minimize monocyte adhesion, activation, and the foreign body response. Radio-frequency glow discharge plasma deposition (RF-GDPD) of tetraethylene glycol dimethyl ether (tetraglyme) was used to produce polyethylene oxide (PEO)-like coatings on a fluorinated ethylene-propylene (FEP) surface. Electron spectroscopy for chemical analysis (ESCA) and static time of flight secondary ion mass spectrometry (ToF-SIMS) were used to characterize the surface chemistry of tetraglyme coating. Fibrinogen adsorption to the tetraglyme surface was measured with 125I-labeled fibrinogen and ToF-SIMS. Adsorption of fibrinogen to plasma deposited tetraglyme was less than 10 ng cm(-2), a 20-fold decrease compared to untreated FEP or tissue culture polystyrene (TCPS). Monocyte adhesion to plasma deposited tetraglyme was significantly lower than adhesion to FEP or TCPS. In addition, when the surfaces were preadsorbed with fibrinogen, fibronectin, or blood plasma, monocyte adhesion to plasma deposited tetraglyme after 2 h or 1 day was much lower than adhesion to FEP. RF-GDPD tetraglyme coating provides a promising approach to make non-fouling biomaterials that can inhibit non-specific material-host interactions and reduce the foreign body response.

Theoretical analysis of adsorption thermodynamics for hydrophobic peptide residues on SAM surfaces of varying functionality

At a fundamental level, protein adsorption to a synthetic surface must be strongly influenced by the interaction between the peptide residues presented by the protein's surface (primary protein structure) and the functional groups presented by the synthetic surface. In this study, semi-empirical molecular modeling was used along with experimental wetting data to theoretically approach protein adsorption at this primary structural level. Changes in enthalpy, entropy, and Gibbs free energy were calculated as a function of residue-surface separation distance for the adsorption of individual hydrophobic peptide residues (valine, leucine, phenylalanine) on alkanethiol self-assembled monolayers on gold [Au-S(CH(2))(15)-X; X = CH(3), OH, NH(3)(+), COO(-)]. The results predict that the adsorption of each type of hydrophobic residue is energetically favorable and entropy dominated on a methyl-terminated hydrophobic surface, energetically unfavorable and enthalpy dominated on a hydroxyl-terminated neutral hydrophilic surface, and very slightly favorable to unfavorable and enthalpy dominated on charged surfaces. These theoretical results provide a basis for understanding some of the fundamental effects governing protein adsorption to synthetic surfaces. This level of understanding is needed for the proactive design of surfaces to control protein adsorption and subsequent cellular response for both implant and tissue engineering applications.

Biocompatibility evaluation of ePTFE membrane modified with PEG in atmospheric pressure glow discharge

ePTFE membranes were modified by poly(ethylene glycol) having a molecular weight of 600 (PEG-600) in atmospheric pressure glow discharge (APG) plasma treatment. ePTFE membranes were immersed in 1%, 3%, or 5% (w/v) PEG-600 in dehydrated ethanol. PEG-600-penetrated ePTFE membranes were dried in a vacuum to immediately remove ethanol, then treated with APG at 20 kHz and 60-70 W for 15 min and thoroughly washed with ethanol and water. PEG-600-modified ePTFE membranes were analyzed using contact angle measurement, Fourier transform infrared attenuated total reflectance (FTIR-ATR), and scanning electron microscopy (SEM). ePTFE membrane contact angles were reduced after PEG-600 plasma treatment. FTIR-ATR spectra showed an absorption band due to a PEG hydroxyl group (-OH). SEM showed that ePTFE fiber surfaces were uniformly immobilized with PEG-600 and retained their porous structure. A general biological evaluation of the PEG-modified ePTFE membranes showed no cytotoxicity on CHO-K1 cell lines and no hemolytic action. Albumin adsorption on the PEG-modified ePTFE membranes increased with increasing PEG-600 deposited on ePTFE membranes. Fibrinogen adsorption decreased with increasing PEG-600 deposited on ePTFE membranes. gamma-Globulin adsorption did not change before or after PEG plasma modification. 1% and 3% PEG-600 plasma-treated ePTFE only slightly increased platelet adhesion, but adhering platelets evidenced no pseudopod formation. 5% PEG-600-modified ePTFE showed relatively large numbers of platelet adhesion. We concluded that 3% PEG-600-modified ePTFE membrane had the best physical properties and biological compatibility, indicating 3% PEG-600-modified ePTFE membranes exhibit the potential for blood filter application.

Hydrogels based on poly(ethylene oxide) and poly(tetramethylene oxide) or poly(dimethyl siloxane): synthesis, characterization, in vitro protein adsorption and platelet adhesion

In vitro protein adsorption, platelet adhesion and activation on new hydrogel surfaces, composed of poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (PTMO) or poly(dimethyl siloxane) (PDMS), were investigated. By varying PEO length (MW = 2000 or 3400), hydrophobic components (PTMO or PDMS) or polymer topology (block or graft copolymers), various physical hydrogels were produced. Their structures were verified by 1H NMR and ATR-IR and the molecular weights were determined by gel permeation chromatography. The hydrogels were soluble in a variety of organic solvents, while absorbed a significant amount of water with preserved three-dimensional structure by physical crosslinking. The dynamic contact angle measurement revealed that the surface hydrophilicity increased by incorporating longer PEO, PEO grafting, and adopting PDMS as a hydrophobic segment instead of PTMO. It was observed from in vitro protein adsorption study that the hydrogels exhibited significantly lower adsorption of human serum albumin (HSA), human fibrinogen (HFg), and IgG, when compared with Pellethane, a commercial polyurethane taken as a control. The hydrogels were attractive for HSA but not sensitive to HFg and IgG. And more than 65% of the proteins detected on the surfaces of the hydrogels were reversibly detached by being treated with an SDS solution. It was evident that the hydrogels synthesized in this study were much more resistant to platelet adhesion than the control, which might depend on the composition of proteins adsorbed on the surfaces and their degree of denaturation. Among the hydrogels tested, PEO3,4kPDMS exhibited albumin-rich and platelet-resistant surfaces, implying a potential candidate for biomaterial.

Modification of gold surface by grafting of poly(ethylene glycol) for reduction in protein adsorption and platelet adhesion

Gold surfaces were first treated in an alkanethiol solution to form self-assembled monolayers (SAMs). The thiolated Au surface was then subjected to Ar plasma pretreatment, followed by air exposure and UV-induced graft polymerization of poly(ethylene glycol) methacrylate (PEGMA) macromonomer. In comparison with the 3-mercaptopropionic acid-2-ethylhexyl ester (MPAEE) SAM, the (3-mercaptoproply)trimethoxysilane (MPTMS) SAM on Au exhibited higher stability under the conditions of Ar plasma pretreatment. The graft concentration of the PEGMA polymer on SAM-modified Au surface increased with increasing PEGMA macromonomer concentration and UV-graft polymerization time. The modified-Au surfaces were characterized by X-ray spectroscopy (XPS), atomic force microscopy (AFM), and water contact angle measurement. The Au surface with a high concentration of grafted PEGMA polymer could completely repel protein adsorption and platelet adhesion.

Stabilization of oil-in-water emulsions by beta-lactoglobulin-polyethylene glycol conjugates

The disulfide bonds of beta-lactoglobulin (beta-lg) were modified by oxidative sulfitolysis to generate beta-lgSO(3). The native protein (beta-lg) and the modified protein (beta-lgSO(3)) were conjugated to activated polyethylene glycol (PEG) to generate beta-lgPEG and beta-lgSO(3)PEG, respectively. Oil-in-water (o/w) emulsions containing 1% beta-lg or beta-lg conjugates were prepared at pH 2.8, 5.0, and 7.0. Emulsion droplet diameters and zeta potentials were measured. For the same emulsifier, emulsion droplet diameters decreased when emulsion pH increased. Zeta potentials of emulsion droplets increased with pH for beta-lg and beta-lgSO(3). Zeta potentials of beta-lgPEG and beta-lgSO(3)PEG approached zero, suggesting that the protein molecule was covered by PEG chains. Accelerated and 7-day storage stabilities at 21 degrees C of the emulsions were monitored. The emulsifying activity index (EAI) of beta-lgPEG was not significantly different from the EAI of beta-lg. The EAI of beta-lg was enhanced following sulfitolysis of beta-lactoglobulin. The emulsifying activity increased more when the oxidatively modified protein was conjugated to polyethylene glycol. Emulsions made with beta-lgSO(3)PEG were more stable than emulsions made with beta-lg, beta-lgPEG, or beta-lgSO(3) under accelerated stability study and for 7 days at 21 degrees C. The stability of o/w emulsions stabilized with beta-lgSO(3)PEG increased because individual droplets were better protected, against protein bridging or coalescence, by the thick adsorbed protein-PEG layer.

Blocking adhesion to cell and tissue surfaces by the chemisorption of a poly-L-lysine-graft-(poly(ethylene glycol); phenylboronic acid) copolymer

A family of graft copolymers that can sterically inhibit interactions between biological surfaces was developed. These copolymers contained phenylboronic acid (PBA) groups as saccharide-binding moieties on a poly-(L-lysine) backbone and poly(ethylene glycol) (PEG) grafted as adhesion-resisting side chains. These copolymers spontaneously chemisorbed to a saccharide-containing resin, and this binding was sterically controlled by the PEG grafting ratio. Copolymers with optimal grafting ratios spontaneously assembled on red blood cell surfaces and sterically prevented their agglutination by lectins and by antibodies to blood groups. The simple conjugation scheme created a PBA moiety with a pKa ca. 6, which can bind cis-diols much more strongly at physiological pH than typical PBA moieties, whose pKas are typically greater than 8. These surfactant copolymers can be employed to PEGylate cell or tissue surfaces by simply incubating the surfaces with an aqueous polymer solution, and have many potential applications such as preventing antibody binding to transplanted cells.

Microengineering of cellular interactions

Tissue function is modulated by an intricate architecture of cells and biomolecules on a micrometer scale. Until now, in vitro cellular interactions were mainly studied by random seeding over homogeneous substrates. Although this strategy has led to important discoveries, it is clearly a nonoptimal analog of the in vivo scenario. With the incorporation--and adaptation--of microfabrication technology into biology, it is now possible to design surfaces that reproduce some of the aspects of that architecture. This article reviews past research on the engineering of cell-substrate, cell-cell, and cell-medium interactions on the micrometer scale.

Blood-compatible biomaterials by surface coating with a novel antithrombin-heparin covalent complex

Covalent antithrombin-heparin complex (ATH) was covalently grafted to a polycarbonate urethane (Corethane) endoluminal graft (a kind gift of Corvita Corporation) after being activated using 0.3% m/m NaOCl in 0.15 M phosphate pH 6.0. ATH graft density (1.98 x 10(-7) mol/m2) was 6 times the maximum amount of unfractionated heparin (UFH) that could be bound to polycarbonate urethane surfaces. Surface-bound ATH could be stored in sterile 0.15 M NaCl at 4 degrees C for at least 2 months with good antithrombotic activity before being implanted into rabbits. Analysis of ATH-coated tubing showed that it contained significant direct thrombin inhibitory activity. In vivo testing in a rabbit model was compared to non-activated non-coated surfaces, activated-non-coated surfaces, hirudin-coated surfaces and antithrombin (AT)-coated surfaces. The weight of the clot generated in the ATH-coated graft tubing was significantly less than the weight of the clot generated within the hirudin-coated graft (p = 0.03 with a 1-tailed Student's t test). The anticoagulant nature of ATH grafts in vivo was shown to be due to bound ATH because boththe AT-coated surfaces and non-coated but activated surfaces showed similar thromboresistant efficacy to that of untreated material (ANOVA; p < 0.05). Apart from the direct antithrombin activity that contributed to much of the prolonged patency in vivo, surface-bound ATH likely catalyzed AT inhibition of thrombin, as evidenced by a significant number of 125I-AT binding sites (> or = 1.5 x 10(-8) mol/m2). Thus, ATH appears to be a good candidate for coating cardiovascular devices, such as endoluminal grafts, with high levels of substitution and significant long-term blood-compatibility.

Amine-reactive biodegradable diblock copolymers

A new class of diblock copolymers was synthesized from biodegradable poly(lactic acid) and poly(ethylene glycol)minus signmonoamine. These polymers were activated by covalently attaching linkers such as disuccinimidyl tartrate or disuccinimidyl succinate to the hydrophilic polymer chain. The polymers were characterized by (1)H NMR spectroscopy, (13)C NMR spectroscopy and gel permeation chromatography (GPC). These investigations indicated that the polymers were obtained with the correct composition, in high purities, and the expected molecular weight. By using dyes containing primary amine groups such as 5-aminoeosin as model substrates, it was possible to show that the polymers are able to bind such compounds covalently. The diblock copolymers were developed to suppress unspecific protein adsorption and allow the binding of bioactive molecules by instant surface modification. The polymers are intended to be used for tissue engineering applications where surface immobilized cell adhesion peptides or growth factors are needed to control cell behavior.

Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ECM analogs for tissue engineering

Photopolymerizable polyethylene glycol (PEG) derivatives have been investigated as hydrogel tissue engineering scaffolds. These materials have been modified with bioactive peptides in order to create materials that mimic some of the properties of the natural extracellular matrix (ECM). The PEG derivatives with proteolytically degradable peptides in their backbone have been used to form hydrogels that are degraded by enzymes involved in cell migration, such as collagenase and elastase. Cell adhesive peptides, such as the peptide RGD, have been grafted into photopolymerized hydrogels to achieve biospecific cell adhesion. Cells seeded homogeneously in the hydrogels during photopolymerization remain viable, proliferate, and produce ECM proteins. Cells can also migrate through hydrogels that contain both proteolytically degradable and cell adhesive peptides. The biological activities of these materials can be tailored to meet the requirements of a given tissue engineering application by creating a mixture of various bioactive PEG derivatives prior to photopolymerization.

Poly(ethylene glycol): protein-repulsive or albumin-compatible?

In the literature, many papers deal with the behavior of proteins in aqueous media in the presence of poly(ethylene glycol) (PEG) molecules or poly(ethylene oxide) (PEO) segments, physically adsorbed onto, or covalently attached to, macromolecules or to solid surfaces. In particular, it is well known that PEO segments make foreign materials stealthy, i.e. they are much less detected by the immune system either through humoral reactions or, at the cell level, through opsonins. Revisiting the literature led us to challenge the largely accepted opinion that the decreased recognition of PEO segment-bearing foreign macromolecules and particles by the mononuclear phagocyte system is primarily the consequence of the repulsion of all blood proteins by PEG segments through the excluded volume effect. This challenge is based on the finding that albumin and PEG are compatible in phosphate-buffered saline at room temperature and at concentrations comparable to those measured by others on the surface of PEO segment-bearing species, whereas fibrinogen and PEG phase-separated and were incompatible despite the much lower concentration of the latter protein. According to literature and to these observations, it is proposed that the stealth effect induced by PEO segments is primarily due to the compatibility between PEO segments of intermediate molar mass and albumin, thus rendering PEO-bearing macromolecules or surfaces to look like native albumin. Under such conditions, the hospitality offered by PEG macromolecules or PEO segments to albumin, the dominant plasma protein, results in a 'chameleon' effect that prevents the activation of other PEG-compatible or -incompatible plasma proteins or cells involved in foreign body recognition and elimination. PEG with molar masses > or = 8000 did not accommodate albumin in agreement with the excluded volume phenomenon.

Protein adsorption to polyethylene glycol modified liposomes from fibrinogen solution and from plasma

Unmodified and polyethylene glycol (PEG) modified neutral and negatively charged liposomes were prepared by freeze-thaw and extrusion followed by chromatographic purification. The effects of PEG molecular weight (PEG 550, 2000, 5000), PEG loading (0-15 mol%), and liposome surface charge on fibrinogen adsorption were quantified using radiolabeling techniques. All adsorption isotherms increased monotonically over the concentration range 0-3 mg/ml and adsorption levels were low. Negatively charged liposomes adsorbed significantly more fibrinogen than neutral liposomes. PEG modification had no effect on fibrinogen adsorption to neutral liposomes. An inverse relationship was found between PEG loading of negatively charged liposomes and fibrinogen adsorption. PEGs of all three molecular weights at a loading of 5 mol% reduced fibrinogen adsorption to negatively charged liposomes. Protein adsorption from diluted plasma (10% normal strength) to four different liposome types (neutral, PEG-neutral, negatively charged, and PEG-negatively charged) was investigated using gel electrophoresis and immunoblotting. The profiles of adsorbed proteins were similar on all four liposome types, but distinctly different from the profile of plasma itself, indicating a partitioning effect of the lipid surfaces. alpha2-macroglobulin and fibronectin were significantly enriched on the liposomes whereas albumin, transferrin, and fibrinogen were depleted compared to plasma. Apolipoprotein AI was a major component of the adsorbed protein layers. The blot of complement protein C3 adsorbed on the liposomes suggested that the complement system was activated.

Long-term stability of grafted polyethylene glycol surfaces for use with microstamped substrates in neuronal cell culture

Crucial to long-term stability of neuronal micropatterns is functional retention of the underlying substratum while exposed to cell culture conditions. We report on the ability of covalently bound PEG films in long-term cell culture to continually retard protein adhesion and cell growth. PDMS microstamps were used to create poly-d-lysine (PDL) substrates permissive to cell attachment and growth, and polyethylene glycol (PEG) substrates were used to minimize protein and cell adhesion. Film thickness was measured using null ellipsometry and atomic force microscopy (AFM). Organosilane film structure was examined using Fourier transform infrared (FT-IR) spectroscopy. Long-term film stability in cell culture conditions was tested by immersion in 0.1 M sodium phosphate buffer pH 7.4 for up to one month. Null ellipsometry and water contact measurements indicated that organosilane films were stable up to one month, whereas the PEG film thickness declined rapidly after day 25. Hippocampal cells plated at 200 cells/mm2 on uniform PEG substrates gave a steady increase in biofilm thickness on PEG films throughout the culture, possibly from proteins of neuronal origin. We found that all the layers in the cross-linking procedure were stable in cell culture conditions, with the exception of PEG, which degraded after day 25.

Fibronectin modulates macrophage adhesion and FBGC formation: the role of RGD, PHSRN, and PRRARV domains

To probe the role of human plasma fibronectin in modulating human blood-derived macrophage adhesion and fusion to form multinucleated foreign-body giant cells (FBGC), a series of biomimetic oligopeptides based on the functional structure of fibronectin was designed and synthesized. Peptides incorporated the RGD and PHSRN integrin-binding sequences from FIII-10 and FIII-9 modules, respectively, and the PRRARV sequence from the C-terminal heparin-binding domain, either alone or in combination. Peptides were immobilized onto a polyethyleneglycol-based polymer substrate. The following conclusions were reached. Fibronectin modulated macrophage adhesion and the extent (i.e., size) of FBGC formation on control surfaces in the presence of serum proteins. Macrophages adhered to all substrates with relatively subtle differences between adhesion mediated by RGD, PHSRN, PRRARV, or combinations thereof. beta1-integrin subunit was essential in macrophage adhesion to peptide-grafted networks in a receptor-peptide specific manner, whereas beta3-integrin subunit was less important. Macrophage adhesion to PRRARV was mediated primarily by the direct interaction with integrins. RGD or PHSRN alone did not provide an adequate substrate for macrophage fusion to form FBGCs. However, the PHSRN synergistic site and the RGD site in a single oligopeptide provided a substrate for FBGC formation that was statistically comparable to that on the positive control material in the presence of serum proteins. This response was highly dependent upon the relative orientation between RGD and PHSRN. PRRARV did not support FBGC formation. These results demonstrate the importance of fibronectin and, specifically, the synergy between RGD and PHSRN domains, in supporting macrophage fusion to form FBGCs.

A novel surfactant-based immobilization method for varying substrate-bound fibronectin

Most biomaterials can be rendered adhesive for anchorage-dependent cells by adsorption of serum, isolated extracellular matrix proteins, or immobilization of peptide sequences. However, difficulties are frequently encountered in characterizing the adsorbed layer due to conformational changes in the molecules following adsorption and interference from nonspecifically adsorbed molecules. In this study, we have investigated a technique for covalently immobilizing fibronectin to the PEO-containing triblock copolymer Pluronic F108 ("F108"). We have compared this technique to solution adsorption of fibronectin for its ability to provide controlled variation of bound fibronectin and regulation of fibroblast behavior. Both simple adsorption and covalent immobilization were effective for varying substrate-bound fibronectin. However, adsorption of fibronectin did not effectively regulate fibroblast attachment or spreading in either serum-free or serum-containing media. Fibroblast attachment, spreading, cytoskeletal organization, and proliferation were effectively regulated in response to fibronectin immobilized to F108. Furthermore, F108-treated surfaces without immobilized fibronectin did not support nonspecific fibroblast attachment, even in the presence of serum-containing medium. Fibroblasts were observed to only proliferate on surfaces with high levels of immobilized fibronectin that supported extensive cell spreading and cytoskeletal organization. In summary, covalent immobilization of fibronectin to F108 provided controlled regulation of fibroblast behavior without interference from nonspecific protein adsorption, even in the presence of serum-containing medium.

Protein Adsorption onto Zirconia Modified with Terminally Grafted Polyvinylpyrrolidone

The potential effectiveness of poly(vinyl pyrrolidone) (PVP) as a zirconia surface modifier for protein adsorption reduction was investigated using lysozyme (LYS). The relatively small size of LYS (45 x 30 x 30 Å) allowed for testing the adequacy of the graft polymerization method for producing a dense surface chain coverage to exclude LYS from direct interaction with the zirconia surface. The study demonstrated that a PVP brush layer is capable of reducing lysozyme adsorption. Overall, the maximum adsorption capacity decreased (by up to about 76%) due to surface modification with increasing polymer/silane surface coverage ratio (mol/mol). Adsorption reduction, due to protein exclusion from the surface by the tethered polymer layer, increased significantly when the distance between surface chains was less than the large axis of LYS (i.e., 45 Å). The present results are encouraging and suggest further consideration of polymer-modified ceramic surfaces for reducing fouling of ceramic membranes during protein ultrafiltration and producing ceramic biocompatible surfaces for biomedical applications. Copyright 2001 Academic Press.

Modification of Si(100) surface by the grafting of poly(ethylene glycol) for reduction in protein adsorption and platelet adhesion

The modification of argon plasma-pretreated single-crystal Si(100) wafer surfaces via the UV-induced graft polymerization of poly(ethylene glycol) methacrylate (PEGMA) macromonomer (molecular weight approximately 340) for biomaterials applications was explored. The modified Si(100) surfaces were characterized by X-ray photoelectron spectroscopy and atomic force microscopy. Surface peroxide concentrations resulting from the argon plasma treatment and subsequent atmospheric exposure were determined by a coupling reaction with diphenylpicrylhydrazyl. The results suggested that a short plasma treatment time of 10 s and brief air exposure were sufficient for generating an optimum amount of peroxides and hydroperoxides for the subsequent UV-induced graft polymerization. The graft concentration of the PEGMA polymer increased with increasing PEGMA macromonomer concentration for the graft polymerization and with increasing UV graft polymerization time. The PEGMA graft-polymerized silicon surface with a high poly(ethylene glycol) graft concentration was very effective in preventing protein adsorption and platelet adhesion. The grafted PEGMA polymer layer on the Si(100) surface exhibited fairly good stability during storage in a buffer solution.

Surface modification of polyethylene terephthalate using PEO-polybutadiene-PEO triblock copolymers

The initial step of thrombus formation on blood-contacting biomaterials is known to be adsorption of blood proteins followed by platelet adhesion. It is generally accepted that surface modification of the biomaterials with poly(ethylene oxide) (PEO) substantially reduces protein adsorption and cell adhesion. Dacron(R) (polyethylene terephthalate) fabric, which is one of the biomaterials commonly used in blood-contacting devices, was grafted with PEO. A simple two-step procedure for covalent grafting of PEO onto the surface of Dacron(R) fabric was used. The surface was first treated with PEO-polybutadiene-PEO (PEO-PB-PEO) triblock copolymer, to introduce a layer of double bonds onto the surface. The Dacron(R) surface was then exposed to a solution of Pluronic(R) F108 (PF108), a commercially available PEO-poly(propylene oxide)-PEO (PEO-PPO-PEO) triblock copolymer. The surface with two adsorbed layers of PEO-PB-PEO and PF108 was gamma-irradiated in the presence of PF108 in the bulk solution for a total radiation dose of 0.8 Mrad. The bulk concentrations of PEO-PB-PEO and PF108 were varied to maximize the efficiency of PEO grafting. Fibrinogen adsorption on PEO-grafted surfaces was reduced more than 90%, compared with that on control surfaces, irrespective of the bulk concentrations of polymers used for grafting. Platelet adhesion was also reduced substantially by PEO grafting. Only a few round platelets were able to adhere to the PEO-grafted surface, while the control surface was fully covered with aggregates of activated platelets. PEO grafting on polyethylene terephthalate using PEO-PB-PEO and PEO-PPO-PEO block copolymers is a simple approach that can be used for various other biomaterials.

'Stealth' corona-core nanoparticles surface modified by polyethylene glycol (PEG): influences of the corona (PEG chain length and surface density) and of the core composition on phagocytic uptake and plasma protein adsorption

Nanoparticles possessing poly(ethylene glycol) (PEG) chains on their surface have been described as blood persistent drug delivery system with potential applications for intravenous drug administration. Considering the importance of protein interactions with injected colloidal dug carriers with regard to their in vivo fate, we analysed plasma protein adsorption onto biodegradable PEG-coated poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA) and poly(varepsilon-caprolactone) (PCL) nanoparticles employing two-dimensional gel electrophoresis (2-D PAGE). A series of corona/core nanoparticles of sizes 160-270 nm were prepared from diblock PEG-PLA, PEG-PLGA and PEG-PCL and from PEG-PLA:PLA blends. The PEG Mw was varied from 2000-20000 g/mole and the particles were prepared using different PEG contents. It was thus possible to study the influence of the PEG corona thickness and density, as well as the influence of the nature of the core (PLA, PLGA or PCL), on the competitive plasma protein adsorption, zeta potential and particle uptake by polymorphonuclear (PMN) cells. 2-D PAGE studies showed that plasma protein adsorption on PEG-coated PLA nanospheres strongly depends on the PEG molecular weight (Mw) (i.e. PEG chain length at the particle surface) as well as on the PEG content in the particles (i.e. PEG chain density at the surface of the particles). Whatever the thickness or the density of the corona, the qualitative composition of the plasma protein adsorption patterns was very similar, showing that adsorption was governed by interaction with a PLA surface protected more or less by PEG chains. The main spots on the gels were albumin, fibrinogen, IgG, Ig light chains, and the apolipoproteins apoA-I and apoE. For particles made of PEG-PLA45K with different PEG Mw, a maximal reduction in protein adsorption was found for a PEG Mw of 5000 g/mole. For nanospheres differing in their PEG content from 0.5 to 20 wt %, a PEG content between 2 and 5 wt % was determined as a threshold value for optimal protein resistance. When increasing the PEG content in the nanoparticles above 5 wt % no further reduction in protein adsorption was achieved. Phagocytosis by PMN studied using chemiluminescence and zeta potential data agreed well with these findings: the same PEG surface density threshold was found to ensure simultaneously efficient steric stabilization and to avoid the uptake by PMN cells. Supposing all the PEG chains migrate to the surface, this would correspond to a distance of about 1.5 nm between two terminally attached PEG chains in the covering 'brush'. Particles from PEG5K-PLA45K, PEG5K-PLGA45K and PEG5K-PCL45K copolymers enabled to study the influence of the core on plasma protein adsorption, all other parameters (corona thickness and density) being kept constant. Adsorption patterns were in good qualitative agreement with each other. Only a few protein species were exclusively present just on one type of nanoparticle. However, the extent of proteins adsorbed differed in a large extent from one particle to another. In vivo studies could help elucidating the role of the type and amount of proteins adsorbed on the fate of the nanoparticles after intraveinous administration, as a function of the nature of their core. These results could be useful in the design of long circulating intravenously injectable biodegradable drug carriers endowed with protein resistant properties and low phagocytic uptake.

Polyethylene glycol-coated biocompatible surfaces

Surfaces covered with polyethylene glycol (PEG; HO-(CH(2)-CH(2)-O)(n)-H) have been shown to be biocompatible because PEG's properties yield nonimmunogenicity, nonantigenicity, and protein rejection. To produce a biocompatible surface coating, we have developed a method for grafting PEG onto activated silica films. We first deposited an amorphous silica film by plasma-enhanced chemical vapor deposition from SiH(4) and O(2) gases, which provided the flexibility to coat diverse materials with different chemistries and shapes. The silica films were activated by exposure to water plasma, increasing the number of silanol groups (Si-OH) on their surface. The surface silanol groups were then chemically reacted with the hydroxyl end of PEG to form an ester bond, Si-O-C, and to cover the surface with PEG. The surface reactions were monitored using attenuated total reflection Fourier transform infrared spectroscopy. The vibrational absorption bands of the C-O and -CH(2) bonds increased with time and saturated, indicating that PEG was adsorbed to saturation coverage on the surface. Simultaneously, the Si-OH absorption band decreased, showing that the surface silanols reacted with PEG and were depleted. The PEG-covered surfaces were physically characterized by atomic force microscopy, Auger electron spectroscopy, ellipsometry, and contact angle measurements. These characterization techniques provided additional evidence for the existence of chemically bonded PEG on the surfaces. Efficacy of protein rejection on PEG-covered surfaces was studied through measurements of the fluorescence intensity of Texas red-labeled bovine serum albumin brought in contact with such surfaces in solution. Significantly less protein adsorption was observed on surfaces covered with PEG compared to uncovered surfaces.

Patterned poly(chlorotrifluoroethylene) guides primary nerve cell adhesion and neurite outgrowth

Central nervous system (CNS) neurons, unlike those of the peripheral nervous system, do not spontaneously regenerate following injury. Recently it has been shown that in the developing CNS, a combination of cell-adhesive and cell-repulsive cues guide growing axons to their targets. We hypothesized that by mimicking these guidance signals, we could guide nerve cell adhesion and neurite outgrowth in vitro. Our objective was to direct primary nerve cell adhesion and neurite outgrowth on poly(chlorotrifluoroethylene) (PCTFE) surfaces by incorporating alternating patterns of cell-adhesive (peptide) and nonadhesive (polyethylene glycol; PEG) regions. PCTFE was surface-modified with lithium PEG-alkoxide, demonstrating the first report of metal-halogen exchange with an alkoxide and PCTFE. Titanium and then gold were sputtered onto PEG-modified films, using a shadow-masking technique that creates alternating patterns on the micrometer scale. PCTFE-Au regions then were modified with one of two cysteine-terminated laminin-derived peptides, C-GYIGSR or C-SIKVAV. Hippocampal neuron cell-surface interactions on homogeneously modified surfaces showed that neuron adhesion was decreased significantly on PEG-modified surfaces and was increased significantly on peptide-modified surfaces. Cell adhesion was greatest on CGYIGSR surfaces while neurite length was greatest on CSIKVAV surfaces and PLL/laminin positive controls, indicating the promise of peptides for enhanced cellular interactions. On patterned surfaces, hippocampal neurons adhered and extended neurites preferentially on peptide regions. By incorporating PEG and peptide molecules on the surface, we were able to simultaneously mimic cell-repulsive and cell-adhesive cues, respectively, and maintain the biopatterning of primary CNS neurons for over 1 week in culture.

Plasma-deposited membranes for controlled release of antibiotic to prevent bacterial adhesion and biofilm formation

Bacterial infection on implanted medical devices is a significant clinical problem caused by the adhesion of bacteria to the biomaterial surface followed by biofilm formation and recruitment of other cells lines such as blood platelets, leading to potential thrombosis and thromboembolisms. To minimize biofilm formation and potential device-based infections, a polyurethane (Biospan) matrix was developed to release, in a controlled manner, an antibiotic (ciprofloxacin) locally at the implant interface. One material set consisted of the polyetherurethane (PEU) base matrix radiofrequency glow discharge plasma deposited with triethylene glycol dimethyl ether (triglyme); the other set had an additional coating of poly(butyl methyacrylate) (pBMA). Triglyme served as a nonfouling coating, whereas the pBMA served as a controlled porosity release membrane. The pBMA-coated PEU contained and released ciprofloxacin in a controlled manner. The efficacy of the modified PEU polymers against Pseudomonas aeruginosa suspensions was evaluated under flow conditions in a parallel plate flow cell. Bacterial adhesion and colonization, if any, to the test polymers were examined by direct microscopic image analysis and corroborated with destructive sampling, followed by direct cell counting. The rate of initial bacterial cell adhesion to triglyme-coated PEU was 0. 77%, and to the pBMA-coated PEU releasing ciprofloxacin was 6% of the observed adhesion rates for the control PEU. However, the rate of adherent cell accumulation due to cell growth and replication was approximately the same for the triglyme-coated PEU and the PEU controls, but was zero for the pBMA-coated PEU releasing ciprofloxacin.

Surface modification of poly(tetrafluoroethylene) films via grafting of poly(ethylene glycol) for reduction in protein adsorption

Poly(tetrafluoroethylene) (PTFE) films with surface grafted poly(ethylene glycol) (PEG) chains were prepared by two methods: (1) UV-induced graft copolymerization of methoxy poly- (ethylene glycol) monomethacrylate (PEGMA) onto the plasma-pretreated PTFE films; and (2) coupling of the hydroxyl groups of PEG via ester linkages with the carbonyl chloride groups which were introduced onto the acrylic acid (AAc) graft-copolymerized PTFE surface through reaction with thionyl chloride (SOCl2). The UV-induced graft copolymerization of PEGMA onto the plasma-pretreated PTFE film was explored with different macromonomer concentrations and different UV graft copolymerization time. The coupling reaction, on the other hand, was explored with PEG of different molecular weights. The surface microstructures and compositions of the PEG-modified PTFE films from both processes were characterized by contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) measurements. In general, higher macromonomer concentration and longer UV graft copolymerization time led to a higher graft yield for the UV-induced graft copolymerization with PEGMA. Contact angle measurements revealed that the hydrophilicity of the PTFE film surface was greatly enhanced by the grafting of the PEG chains. The PTFE surface with a high density of grafted PEG was very effective in preventing bovine serum albumin adsorption.

Self-Assembly and Surface Structure of an Amphiphilic Graft Copolymer, Polystyrene-graft-omega-Stearyl-Poly(ethylene oxide)

Surface properties of the polystyrene-graft-omega-stearyl-poly(ethylene oxide) (PS-g-SPEO) have been characterized by X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), contact angle, and spin probe techniques. The XPS results indicate that the surface and bulk composition of the PS-g-SPEO copolymers differ remarkably from each other. The stearyl and EO components enrich at the copolymer/air interfaces due to the self-assembly of the stearyl groups. At the PS-g-SPEO-72.6 surface (the x in PS-g-SPEO-x indicates the bulk density of the SPEO in wt%), the self-assembly of the hydrophobic stearyl groups is strong enough to form a stable liquid crystalline phase as indicated by DSC. At polymer/water interfaces, PS-g-SPEO-72.6 presents a hydrophilic surface with low PEO mobility, whereas PS-g-SPEO-50.6 and PS-g-SPEO-31.0 present the hydrophobic surface with high PEO mobility. The two different types of the surfaces, with different characters in surface energy, surface mobility of PEO, and surface architecture of SPEO, will be quite valuable as models for detecting the synergistic action of the PEO chains and the stearyl groups (specific ligand for albumin binding) in protein solutions. Copyright 2000 Academic Press.

Mucin Adsorption to Hydrophobic Surfaces

The adsorption isotherm of bovine submaxillary gland mucin (BSM) onto a hydrophobic polystyrene surface was determined by using the solution depletion method, in which mucin concentrations were analyzed by amino acid analysis. Adsorption and desorption kinetics of BSM onto hydrophobic polystyrene surfaces were also studied by the solution depletion method, in which mucin solution concentrations were determined by measuring UV absorbance at a wavelength of 280 nm and by a BCA colorimetric assay with final calibration by amino acid analysis. From the adsorption isotherm, we found that the saturated surface concentration (Gamma(max)) was 2.3 mg/m(2), and the adsorption constant (K) was calculated as 0.099 (ml/mg). By using a Langmuir adsorption model and nonlinear fitting, kinetics parameters, k(on) and k(off), were found to be 8.13x10(-3) cm(3) mg(-1) s(-1) and 5.67x10(-4) s(-1), respectively. The coating was found to be very stable with very limited desorption (less than 2%) from a long-term observation (28 h). The mucin coating layer thickness was investigated by several analytical techniques: flow field-flow-fractionation, photon correlation spectroscopy, scanning electron microscopy, and atomic force microscopy. The thickness was measured as 4-5 nm, from which a monolayer coating was concluded. Finally, the weight average molecular weight of purified bovine submaxillary gland mucin (BSM) was determined as 1.6x10(6) Da by using static light scattering. Copyright 2000 Academic Press.

Surface modification using silanated poly(ethylene glycol)s

Surface-grafted poly(ethylene glycol) (PEG) molecules are known to prevent protein adsorption to the surface. The protein-repulsive property of PEG molecules are maximized by covalent grafting. We have synthesized silanated monomethoxy-PEG (m-PEG) for covalent grafting of PEG to surfaces with oxide layers. Two different trialkoxysilylated PEGs were synthesized and characterized. The first trialkoxysilylated PEG was prepared by direct coupling of m-PEG with 3-isocyanatopropyltriethoxysilane through a urethane bond (silanated PEG I). The other silanated PEG (silanated PEG II) containing a long hydrophobic domain between PEG and a silane domain was prepared by reacting m-PEG with 1,6-diisocyanatohexane and 10-undecen-1-ol in sequence before silylation with 3-mercaptopropyl trimethoxysilane. Silanated PEGs I and II were grafted onto glass, a model surface used in our study. The PEG-grafted glass surfaces were characterized by contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). Although contact angle did not change much as the bulk concentration of silanated PEG used for grafting increased from 0.1 to 20 mg/ml for both PEGs I and II, the surface atomic concentrations from XPS measurements showed successful PEG grafting. Surface PEG grafting increased concentration of surface carbon but decreased silicone concentration. The high resolution C1s spectra showed higher ether carbon with lower hydrocarbon compositions for the PEG-grafted surfaces compared to the control surface. AFM images showed that more PEG molecules were grafted onto the surface as the bulk concentration used for grafting was increased. AFM images of the dried surfaces showed that the surfaces were not completely covered by PEG molecules. After hydration, however, the surface appears to be covered completely probably due to the hydration of the grafted PEG chains. Glass surfaces modified with silanated PEGs reduced fibrinogen adsorption by more than 95% as compared with the control surface. Silanated PEGs provides a simple method for PEG grafting to the surface containing oxide layers.

Polyurethane surfaces modified by amphiphilic polymers: effects on protein adsorption

Surface modification of polyurethane (PUR) surfaces was carried out by using three different amphiphilic polymers. Two of the polymers were graft copolymers, having backbones consisting of poly(methyl methacrylate-co-ethylhexyl acrylate) and poly(styrene-co-acrylamide), respectively, and poly(ethylene oxide) PEO 2000 grafts. The third polymer was a commercially available poly(ethylene oxide-b-propylene oxide-b-ethylene oxide) block copolymer, Pluronic 9400. The polymers were designated ACRY, STY2, and PE94, respectively. Surface modification was achieved by adsorption of the amphiphilic polymers at PUR surfaces from an aqueous solution, or by blending the amphiphiles into a PUR solution, followed by solution casting of films. The accumulation of the amphiphilic polymers at the PUR surfaces was observed by XPS and contact angle measurements. The ACRY and PE94 polymers were shown to adsorb poorly at the PUR surface, but gave strong surface effects when present in the PUR matrix. Protein adsorption was measured under static as well as under flow conditions. The modified surfaces had generally lower adsorption of blood proteins (HSA, Fg and IgG) than the unmodified PUR surfaces. ACRY blend modified surfaces had the lowest adsorption.

Equilibrium adsorption of LDL and gold immunoconjugates to affinity membranes containing PEG spacers

The objective of this study was to provide insight into the effects of spacer chemistry on immunoaffinity separations for the capture of large macromolecules and biological complexes. Immunoaffinity membranes were prepared by immobilization of immunoglobulin G (IgG) to flat sheet microporous membranes. Two different systems were examined: immobilized IgG for the immunoadsorption of human low-density lipoprotein (LDL) and immobilized IgG for the immunoadsorption of gold particle immunoconjugate. The IgG was immobilized either directly to the membrane or via a polyethylene glycol (PEG) spacer. Adsorption of LDL was significantly greater for anti-LDL IgG immobilized via PEG than for IgG immobilized directly to the membrane. With the PEG spacer, the adsorption capacity for LDL matched the theoretical density of a monolayer of LDL particles on the membrane surface. The gold particle immunoconjugate, similar in size to LDL, was examined as a generalized model of restrictions to immunoaffinity adsorption of large (>20 nm) biological complexes. Adsorption of gold particles was greater for IgG immobilized via PEG than for IgG immobilized directly to the membrane. It is postulated that the PEG spacer allows lateral movement of the immobilized IgG and dense monolayer packing of adsorbed particles on the membrane surface. These results are pertinent to the removal of LDL from human plasma and the purification of gene therapy delivery vectors, viral vaccines, and other large biological complexes.

Grafted poly(ethylene oxide) brushes as nonfouling surface coatings

The identification of design criteria for the prevention of surface fouling by protein adsorption has been an elusive research goal. The current ideas in this domain assume two different directions. One focuses on correlating protein adsorption with macroscopic surface properties such as the water wettability. The second approach involves tailoring the molecular interactions between the adsorbing proteins and the surface. In this paper, we focus on the experimental results and theoretical ideas concerned with tuning the interfacial forces by means of terminally grafted PEO chains.

Bacterial adhesion at synthetic surfaces

A systematic investigation into the effect of surface chemistry on bacterial adhesion was carried out. In particular, a number of physicochemical factors important in defining the surface at the molecular level were assessed for their effect on the adhesion of Listeria monocytogenes, Salmonella typhimurium, Staphylococcus aureus, and Escherichia coli. The primary experiments involved the grafting of groups varying in hydrophilicity, hydrophobicity, chain length, and chemical functionality onto glass substrates such that the surfaces were homogeneous and densely packed with functional groups. All of the surfaces were found to be chemically well defined, and their measured surface energies varied from 15 to 41 mJ. m(-2). Protein adsorption experiments were performed with (3)H-labelled bovine serum albumin and cytochrome c prior to bacterial attachment studies. Hydrophilic uncharged surfaces showed the greatest resistance to protein adsorption; however, our studies also showed that the effectiveness of poly(ethyleneoxide) (PEO) polymers was not simply a result of its hydrophilicity and molecular weight alone. The adsorption of the two proteins approximately correlated with short-term cell adhesion, and bacterial attachment for L. monocytogenes and E. coli also correlated with the chemistry of the underlying substrate. However, for S. aureus and S. typhimurium a different pattern of attachment occurred, suggesting a dissimilar mechanism of cell attachment, although high-molecular-weight PEO was still the least-cell-adsorbing surface. The implications of this for in vivo attachment of cells suggest that hydrophilic passivating groups may be the best method for preventing cell adsorption to synthetic substrates provided they can be grafted uniformly and in sufficient density at the surface.

Complement activation by PEO-grafted glass surfaces

Activation of the complement system is one way in which the human body reacts to foreign materials that come in contact with blood. Poly(ethylene oxide) (PEO) has been used quite frequently to modify biomaterial surfaces to prevent protein adsorption and cell adhesion. Despite extensive use of PEO, however, PEO-induced complement activation has not been examined before. We examined the complement activation by PEO chains grafted to glass surfaces. PEO was grafted to trichlorovinylsilane-treated glass (TCVS-glass) by gamma-irradiation using PEO homopolymer, Pluronic F108 (PF108), and PEO-polybutadiene-PEO triblock copolymer (COP5000). Complement activation was assessed by measuring the plasma C3a level. Of the three polymers grafted (PEO, PF108, and COP5000), only PF108 showed significant increases in complement activation over controls. Complement C3a production on PF108-grafted glass was linearly dependent on surface concentration of grafted PF108. The C3a concentration increased from 46 ng/mL to 316 ng/mL as the surface PF108 concentration increased from 0-0.25 microg/cm(2). Kinetics of C3a generation by PF108-grafted surfaces show that 60% of the steady state C3a concentration was generated during the first hour of plasma exposure. When the same PF108-grafted glass surface was repeatedly exposed to fresh plasma, the amount of C3a generated decreased by 70% after the first exposure. This supports the "single-hit" mechanism in complement activation. PEO homopolymer did not activate complement in bulk solution, and, thus, it appears that C3a complement activation by PF108-grafted surfaces is due to the presence of poly(propylene oxide) units. Grafting of PEO using PEO-containing block copolymers requires examination of complement activating properties of the non-PEO segment.

Characterization of cortical astrocytes on materials of differing surface chemistry

The behavior of cortical astrocytes was evaluated on a number of medically relevant materials of differing physicochemical properties. This study describes cell attachment, DNA synthesis, production of extracellular matrix (ECM) proteins, and neuronal interactions of perinatal rat astrocytes in vitro. The number of attached astrocytes initially differed among the materials, decreasing with increasing material hydrophobicity. In contrast, the rate of DNA synthesis increased with increasing material hydrophobicity. With the exception of only one material, astrocytes reached confluence by 12 days in culture on all the materials tested. Furthermore, the expression of characteristic ECM proteins and the fundamental ability of astrocytes to support neuronal attachment and growth was qualitatively identical between populations of astrocytes on different materials. The ability of astrocytes to colonize different surfaces initially was mediated via adsorbed serum proteins, as reducing the capacity of a model surface to adsorb proteins inhibited astrocyte colonization for up to 2 weeks in culture. We propose that astrocytes are relatively insensitive to differences in surface chemistries so long as the proteins necessary for cellular attachment are capable of adsorbing to the material to some extent. It seems likely that the ability of astrocytes to produce and remodel a matrix creates a surface environment that eventually becomes similar regardless of the surface chemistry of the underlying material.

Formulation and lyoprotection of poly(lactic acid-co-ethylene oxide) nanoparticles: influence on physical stability and in vitro cell uptake

PURPOSE

To investigate the feasibility of producing freeze-dried poly(ethylene oxide) (PEO)-surface modified nanoparticles and to study their ability to avoid the mononuclear phagocytic system (MPS), as a function of the PEO chain length and surface density.

METHODS

The nanoparticles were produced by the salting-out method using blends of poly(D,L-lactic acid) (PLA) and poly(D,L-lactic acidco-ethylene oxide) (PLA-PEO) copolymers. The nanoparticles were purified by cross-flow filtration and freeze-dried as such or with variable amounts of trehalose as a lyoprotectant. The redispersibility of the particles was determined immediately after freeze-drying and after 12 months of storage at -25 degrees C. The uptake of the nanoparticles by human monocytes was studied in vitro by flow cytometry.

RESULTS

PLA-PEO nanoparticles could be produced from all the polymeric blends used. Particle aggregation after freeze-drying was shown to be directly related to the presence of PEO. Whereas this problem could be circumvented by use of trehalose, subsequent aggregation was shown to occur during storage. These phenomena were possibly related to the specific thermal behaviours of PEO and trehalose. In cell studies, a clear relationship between the PEO content and the decrease of uptake was demonstrated.

CONCLUSIONS

The rational design of freeze-dried PEO-surface modified nanoparticles with potential MPS avoidance ability is feasible by using the polymer blends approach combined with appropriate lyoprotection and optimal storage conditions.

Targetability of novel immunoliposomes prepared by a new antibody conjugation technique

In order to develop long-circulating immunoliposomes (IL), which combine sterical stabilization with a superior targetability, we have introduced a new methodology for attaching monoclonal antibodies directly onto the distal ends of liposome-grafted polyethylene glycol (PEG) chains. Therefore, we have synthesized a new PEG-PE derivative, which had been endgroup-functionalized with cyanuric chloride. Antibodies can simply be coupled to this membrane anchor in mild basic conditions (pH 8.8) without the need for previous antibody derivatizations. The coupling results have been determined with consideration to various liposome parameters and have been compared to several established antibody coupling procedures, where antibodies had been linked directly to the liposome surface in the presence of PEG (conventional IL). To investigate the targetability of the resulting new IL, anti E-selectin mAb have been coupled and the degree of binding selectin-containing cells has been analyzed. The terminal coupled antibodies show a 1.8-fold higher degree of in vitro cell binding compared to conventional IL, which has been attributed to the antibody position being more easy accessible at the PEG termini. Furthermore, we have illustrated the liposome surface topology and the coupled antibodies by atomic force microscopy, which for such fluid IL has been used first. These images have finely corresponded to the cell binding results, and have been discussed in terms of antibody position and flexibility at the liposome surface.

MPEO-PLA nanoparticles: effect of MPEO content on some of their surface properties

Nanoparticles of poly(lactic acid) (PLA) and of blends of PLA and monomethoxypoly(ethylene oxyde) (MPEO-PLA) were prepared by the double emulsion method. Sucrose was added to overcome nanoparticle aggregation with freeze-drying. Whereas PLA nanoparticles rapidly are phagocytosed by the mononuclear phagocyte system cells, the uptake of MPEO-PLA nanoparticles is delayed. Opsonization is one of the steps of phagocytosis, and serum complement is a major component of the opsonin system. The in vitro complement consumption of the prepared nanoparticles was evaluated as a function of time and of their surface area. To avoid the aggregation of MPEO-PLA nanoparticles due to MPEO crystallization, sucrose was necessary, and its concentration was dependent on MPEO proportion in the nanoparticle suspension. As expected, the complement consumption for PLA nanoparticles is faster and more important than for PLA/MPEO-PLA blends. The complement consumption decreases with the increase in MPEO surface density. Complement is less consumed with the lower surface density provided by a higher molecular weight than by the higher surface density provided by a lower molecular weight MPEO. The complement consumption seems to be dependent on the number of nanoparticles in contact with human serum. Finally, the model of steric repulsion of MPEO towards proteins and the importance of the surface density of MPEO were emphasized.

Albumin-binding surfaces: synthesis and characterization

The nature of the proteinaceous film deposited on a biomaterial surface following implantation is a key determinant of the subsequent biological response. To achieve selectivity in the formation of this film, monoclonal antibodies have been coupled to a range of solid substrates using avidin-biotin technology. Antibody clones varied in their antigen-binding activity following insertion of biotin groups into lysine residues. Biotinylated antibodies coupled to solid substrates via an immobilized avidin bridge retained their biological activity. During immobilization of avidin a significant proportion of the protein molecules were passively adsorbed rather than covalently attached to the surface. This loosely bound material could be removed by stringent elution procedures which resulted in a surface density of 5.4 pmol avidin cm(-2). Although these conditions would be harsh enough to denature monoclonal antibodies, they did not destroy the biotin-binding activity of the residual surface-coupled avidin, enabling the subsequent immobilization of biotinylated antibodies. The two-step immobilization technique allowed the use of gentle protein modification procedures, reduced the risk of surface-induced denaturation and removed loosely bound material from the surface. The versatility of the technique encourages its application to a wide range of immobilization systems where retention of biological activity is a key requirement.

A surface plasmon resonance study of albumin adsorption to PEO-PPO-PEO triblock copolymers

Pluronic surfactants, PEO-PPO-PEO triblock copolymers, have been investigated widely due to their protein-resistant properties in applications as coatings for implants and in controlled drug release systems. We have studied a wide range of these copolymers, varying in both PEO and PPO block size, by adsorbing them to a polystyrene surface and investigating their subsequent resistance to human serum albumin adsorption. This investigation has been carried out in real time, using surface plasmon resonance, with the surfaces subsequently visualized by atomic force microscopy. This approach has allowed determination of the effect of the lengths of the PEO and PPO polymer chains on protein resistivity. For low-molecular-weight Pluronics a significant, yet not complete, reduction in albumin adsorption has been observed whereas higher molecular weight Pluronics appear to completely inhibit adsorption within the time frame of this experiment. An increase in the PPO block size of the copolymer also appears to increase its protein resistance. This work further confirms that the binding strength of the anchoring block to the hydrophobic surface, rather than the length of the protruding hydrophilic PEO chains, determines a copolymer's protein resistance capability.