Noncovalent sidewall functionalization of single-walled carbon nanotubes for protein immobilization

Immune activation efficacy of indolicidin is enhanced upon conjugation with carbon nanotubes and gold nanoparticles

Antibiotic resistance is concern of today's world. Search for alternative molecules, for treatment and immune stimulation, remains at the forefront. One such group of biomolecules with promise, along the line of immune stimulation or therapy, is host defense peptide (HDP). These molecules, however, are required at a higher dose to be effective which leads to high cost. To alleviate such problems, an aid can be used to achieve similar efficacy but at a smaller effective dose of the immune stimulant. We hypothesised that by conjugating HDPs with carbon nanotubes and/or gold nanoparticles, it would be possible to stimulate a protective immune response in host system at a lower dosage of HDP. In this report, we characterized, using biophysical methodologies, conjugation of Indolicidin, as a representative of HDP. We further established efficacy of peptide-nanomaterial conjugates in activating innate immunity and protecting against pathogen infection in vitro at a significantly small dose.

Bioelectronic nose combined with a microfluidic system for the detection of gaseous trimethylamine

A bioelectronic nose based on a novel microfluidic system (μBN) was fabricated to detect gaseous trimethylamine (TMA) in real-time. Single-walled carbon nanotube-field effect transistors (SWNT-FETs) were functionalized with olfactory receptor-derived peptides (ORPs) that can recognize the TMA molecules. The ORP-coated SWNT-FETs were assembled with a microfluidic channel and were sealed with top and bottom frames. This simple process was used to complete the μBNs, and a well-defined condition was achieved to detect the gaseous molecules. The μBNs allowed us to detect gaseous TMA molecules down to 10 parts per trillion (ppt) in real-time and showed high selectivity when distinguishing gaseous TMA from other gaseous odorants. The sensor was used to determine the quality of seafood (oysters), and spoiled seafood and other types of spoiled foods were also successfully discriminated without any pretreatment processes. These results indicate that portable-scale platforms can be manufactured by using μBNs and can be applicable for real-time on-site gas analysis.

As-synthesized multi-walled carbon nanotubes for the removal of ionic and non-ionic surfactants

This research deals with the application of untreated multi-walled carbon nanotubes (MWCNT) in their agglomerates form for the removal of non-ionic (TX-100), cationic (CTAB) and anionic (SDBS) surfactants from aqueous media. In order to optimize the removal process, the influence of several key parameters was investigated including contact time under different solid/liquid ratios, initial solution pH, temperature, along with ultrasonication assistance and desorption assays. Experimentations revealed that pH variation enhanced the removal capacities at optimum values of 6, 2 and 8 for TX-100, SDBS and CTAB, respectively, and that hydrophobic interaction is a major adsorption factor, especially for non-ionic surfactant with possible electrostatic interactions occurring for the ionic ones. As well, removal efficiencies peaked for an optimum temperature range between 35 and 45 °C. As for the ultrasonication assistance, it enhanced the overall removal capacities, especially that of the ionic surfactant, with an enhancement of 52% for the case of SDBS after 1h of treatment. The modeling results revealed that the pseudo-second order model provided the best correlation of the dynamic data and that the process was controlled by intraparticle diffusion phenomena. At equilibrium, and under optimized experimental conditions, untreated MWCNTs showed promising removal capacities with 359, 312 and 156 mg/g for TX-100, SDBS and CTAB, respectively.

New life for an old antibiotic

Restoring the antibacterial properties of existing antibiotics is of great concern. Herein, we present, for the first time, the formation and deposition of stable antibiotic nanoparticles (NPs) on graphene oxide (GO) sheets by a facile one-step sonochemical technique. Sonochemically synthesized graphene oxide/tetracycline (GO/TET) composite shows enhanced activity against both sensitive and resistant Staphylococcus aureus (S. aureus). The size and deposition of tetracycline (TET) nanoparticles on GO can be controlled by varying the sonication time. The synthesized NPs ranged from 21 to 180 nm. Moreover, ultrasonic irradiation does not cause any structural and chemical changes to the TET molecule as confirmed by Fourier transform infrared spectroscopy (FTIR). The virtue of π-π stacking between GO and TET additionally facilitate the coating of TET NPs upon GO. A time dependent release kinetics of TET NPs from the GO surface is also monitored providing important insights regarding the mechanism of antibacterial activity of GO/TET composites. Our results show that the GO/TET composite is bactericidal in nature, resulting in similar values of minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). This composite is found to be active against TET resistant S. aureus at a concentration four times lower than the pristine TET. The sensitive S. aureus follows the same trend showing six times lower MIC values compared to pristine TET. GO shows no activity against both sensitive and resistant S. aureus even at a concentration as high as 1 mg/mL but influences the biocidal activity of the GO/TET composite. We propose that the unique structure and composition manifested by GO/TET composites may be further utilized for different formulations of antibiotics with GO. The sonochemical method used in this work can be precisely tailored for the stable deposition of a variety of antibiotics on the GO surface to reduce health risks and increase the spectrum of applications.

Non-covalent polymer wrapping of carbon nanotubes and the role of wrapped polymers as functional dispersants

Carbon nanotubes (CNTs) have been recognized as a promising material in a wide range of applications from biotechnology to energy-related devices. However, the poor solubility in aqueous and organic solvents hindered the applications of CNTs. As studies have progressed, the methodology for CNT dispersion was established. In this methodology, the key issue is to covalently or non-covalently functionalize the surfaces of the CNTs with a dispersant. Among the various types of dispersions, polymer wrapping through non-covalent interactions is attractive in terms of the stability and homogeneity of the functionalization. Recently, by taking advantage of their stability, the wrapped-polymers have been utilized to support and/or reinforce the unique functionality of the CNTs, leading to the development of high-performance devices. In this review, various polymer wrapping approaches, together with the applications of the polymer-wrapped CNTs, are summarized.

Functional modulation and directed assembly of an enzyme through designed non-natural post-translation modification

Designed phenyl azide incorporation combined with bioorthogonal Click chemistry to regulate enzyme activity, or promote its stable assembly on graphene.

Post-translational modification (PTM) modulates and supplements protein functionality. In nature this high precision event requires specific motifs and/or associated modification machinery. To overcome the inherent complexity that hinders PTM's wider use, we have utilized a non-native biocompatible Click chemistry approach to site-specifically modify TEM β-lactamase that adds new functionality. In silico modelling was used to design TEM β-lactamase variants with the non-natural amino acid p-azido-l-phenylalanine (azF) placed at functionally strategic positions permitting residue-specific modification with alkyne adducts by exploiting strain-promoted azide–alkyne cycloaddition. Three designs were implemented so that the modification would: (i) inhibit TEM activity (Y105azF); (ii) restore activity compromised by the initial mutation (P174azF); (iii) facilitate assembly on pristine graphene (W165azF). A dibenzylcyclooctyne (DBCO) with amine functionality was enough to modulate enzymatic activity. Modification of TEM^W165azF with a DBCO–pyrene adduct had little effect on activity despite the modification site being close to a key catalytic residue but allowed directed assembly of the enzyme on graphene, potentially facilitating the construction of protein-gated carbon transistor systems.

Graft-induced midgap states in functionalized carbon nanotubes

Covalent addition of functional groups onto carbon nanotubes is known to generate lattice point defects that disrupt the electronic wave function, resulting namely in a reduction of their optical response and electrical conductance. Here, conductance measurements combined with numerical simulations are used to unambiguously identify the presence of graft-induced midgap states in the electronic structure of covalently functionalized semiconducting carbon nanotubes. The main experimental evidence is an increase of the conductance in the OFF-state after covalent addition of 4-bromophenyl grafts on many single- and double-walled individual nanotubes, the effect of which is fully suppressed after thermodesorption of the adducts. The graft-induced current leakage is thermally activated and can reach several orders of magnitude above its highly insulating pristine-state level. Ab initio simulations of various configurations of functionalized nanotubes corroborate the presence of these midgap states and show their localization around the addends. Moreover, the electronic density of these localized states exhibits an extended hydrogenoid profile along the nanotube axis, providing access for long-range coupling between the grafts. We argue that covalent nanotube chemistry is a powerful tool to prepare and control midgap electronic states on nanotubes for enabling further studies of the intriguing properties of interacting 1D localized states.

Recent progress in oxygen-reducing laccase biocathodes for enzymatic biofuel cells

This review summarizes different approaches and breakthroughs in the development of laccase-based biocathodes for bioelectrocatalytic oxygen reduction. The use of advanced electrode materials, such as nanoparticles and nanowires is underlined. The applications of recently developed laccase electrodes for enzymatic biofuel cells are reviewed with an emphasis on in vivo application of biofuel cells.

Voltammetric immunosensor assembled on carbon-pyrenyl nanostructures for clinical diagnosis of type of diabetes

Herein we report the first serum insulin voltammetric immunosensor for diagnosis of type 1 and type 2 diabetic disorders. The sensor is composed of multiwalled carbon nanotube-pyrenebutyric acid frameworks on edge plane pyrolytic graphite electrodes (PGE/MWNT/Py) to which an anti-insulin antibody was covalently attached. The detection of picomolar levels of serum insulin binding to the surface antibody was achieved by monitoring the decrease in voltammetric current signals of a redox probe taken in the electrolyte solution. This method offered a detection limit of 15 pM for free insulin present in serum. This detection limit was further lowered to 5 pM by designing serum insulin conjugates with poly(acrylic acid)-functionalized magnetite nanoparticles (100 nm hydrodynamic diameter) and detecting the binding of MNP-serum insulin conjugate to the surface insulin-antibody on PGE/MWNT/Py electrodes. When tested on real patient serum samples, the sensor accurately measured insulin levels. To our knowledge, this is the first report of a voltammetric immunosensor capable of both diagnosing and distinguishing the type of diabetes based on serum insulin levels in diabetic patients.

Nanovectorization of TRAIL with single wall carbon nanotubes enhances tumor cell killing

Tumor necrosis factor-related apoptosis-inducing ligand (TRAIL or Apo2L) is a member of the tumor necrosis factor (TNF) superfamily. This type II transmembrane protein is able to bound specifically to cancer cell receptors (i.e., TRAIL-R1 (or DR4) and TRAIL-R2 (or DR5)) and to induce apoptosis without being toxic for healthy cells. Because membrane-bound TRAIL induces stronger receptor aggregation and apoptosis than soluble TRAIL, we proposed here to vectorize TRAIL using single-walled carbon nanotubes (SWCNTs) to mimic membrane TRAIL. Owing to their exceptional and revolutional properties, carbon nanotubes, especially SWCNTs, are used in a wide range of physical or, now, medical applications. Indeed due to their high mechanical resistance, their high flexibility and their hydrophobicity, SWCNTs are known to rapidly diffuse in an aqueous medium such as blood, opening the way of development of new drug nanovectors (or nanocarriers). Our TRAIL-based SWCNTs nanovectors proved to be more efficient than TRAIL alone death receptors in triggering cancer cell killing. These NPTs increased TRAIL pro-apoptotic potential by nearly 20-fold in different Human tumor cell lines including colorectal, nonsmall cell lung cancer, or hepatocarcinomas. We provide thus a proof-of-concept that TRAIL nanovector derivatives based on SWCNT may be useful to future nanomedicine therapies.

Porous graphene–carbon nanotube hybrid paper as a flexible nano-scaffold for polyaniline immobilization and application in all-solid-state supercapacitors

Three-dimensional porous graphene–carbon nanotube hybrid papers were obtained as a conductive, flexible and free-standing nano-scaffold for PANI immobilization.

Enhanced electroactivity and substrate affinity of microperoxidase-11 attached to pyrene-linkers π–π stacked on carbon nanostructure electrodes

An exceptionally large electroactively connected microperoxidase-11 (MP-11) with strong affinity for organic peroxide and offering a high electrocatalytic reduction current density of 7.5 mA cm⁻² is achieved for the first time.

Novel green method of preparation of a poly (ethylene oxide)/graphene nanocomposite using organic salt assisted dispersion

Novel green method was developed to prepare nanocomposites of poly (ethylene oxide) (PEO) and graphene in water. This method is environment friendly with no health hazards and can be adapted to any other water soluble polymers.

Carbon nanotube catalysts: recent advances in synthesis, characterization and applications

Carbon nanotubes are promising materials for various applications.

SPECTROSCOPIC AND ELECTROCHEMICAL CHARACTERIZATION OF IRON(II) AND 2,4-DINITROTOLUENE

The objective of this work was the development of reliable methods to determine 2,4-dinitrotoluene, a precursor to explosives. A complex between Fe(II) ion and 2,4-dinitrotoluene was formed in solution and characterized by ultraviolet-visible absorption spectroscopy using Job's plots and attenuated total reflection-Fourier transform infrared spectroscopy. Surface modification of glassy carbon electrodes were performed with iron nanoparticles via electrochemical reduction of iron(II). The modified electrode was employed for the determination of 2,4-dinitrotoluene. Scanning electron micrographs showed that the iron nanoparticles were incorporated on the surface of glassy carbon electrode. The electrochemical determination of 2,4-dinitrotoluene was performed by cyclic voltammetry using the modified electrode. The iron modified electrode produced larger reduction currents than the unmodified electrode for the same concentration of 2,4-dinitrotoluene. Concentrations of 2,4-dinitrotoluene as low as 10 parts per billion were determined using the modified electrode.

Peptide-induced affinity binding of carbonic anhydrase to carbon nanotubes

Although affinity binding between short chain peptides and carbon nanotube (CNT) has been reported, little is known for the study of proteins with CNT recognition and specific binding capabilities. Herein, carbonic anhydrase (CA) was functionalized via protein fusion with a single-walled carbon nanotube (SWNTs)-binding peptide, thereby forming a bioactive protein with high affinity binding capability. TEM and AFM analyses showed that the fusion CA could firmly coat to SWNTs with a surface coverage over 51%, while the enzyme maintained its catalytic activity. Structural analysis revealed that slight conformation changes were induced as a result of the fusion; however, the affinity binding of CA to the hydrophobic surface of SWNTs restored the native structure of the protein, with the conformation of the SWNT-bound CA largely resembling that of the native parent enzyme. Interfacial interactions between the fusion CA and SWNT were further investigated with Raman spectrometry and microscopic analysis. The results suggested that such peptide-induced CNT-protein binding allows the development of bioactive hybrid materials with the native structures of the protein moieties largely undisrupted.

Fast and facile preparation of PEGylated graphene from graphene oxide by lysosome targeting delivery of photosensitizer to efficiently enhance photodynamic therapy

A fast, facile and mass production method was reported to obtain stable and disperse polyethylene glycol (PEG) modified nanographene (NGO-PEG). Branched polyethylenimine (BPEI) was used to modify the NGO-PEG (NGO-PEG-BPEI) for further application.

Recent developments in carbon nanomaterial sensors

The structural diversity of carbon nanomaterials provides an array of unique electronic, magnetic and optical properties, which when combined with their robust chemistry and ease of manipulation, makes them attractive candidates for sensor applications. In this review recent developments in the use of carbon nanoparticles and nanostructures as sensors and biosensors are explored.

π–π interactions in carbon nanostructures

A concise tutorial review on the basic concepts of π–π interactions involving fullerenes, carbon nanotubes, and graphene.

Study of dispersion of boron nitride nanotubes by triton X-100 surfactant using molecular dynamics simulations

In this study, the dispersion of aggregated boron nitride nanotubes (BNNTs) in aqueous triton X-100 surfactant solution is studied using molecular dynamic simulation. The results indicate that how in the presence of the surfactant, a space between two BNNTs is created, which leads to the dispersion of the BNNTs. The radial distribution functions (RDFs) of the atoms of BNNTs and hydrophilic and hydrophobic segments of the surfactant respect to atoms of water molecules show that in the presence of the surfactant, a layer of water molecules is located in the neighborhood of the BNNTs and then hydrophobic and hydrophilic segments of the surfactant reside at more distances of the BNNTs. In the absence of the surfactant, the hydrogen bond between nitrogen atom of the BNNT and hydrogen atom of water molecules is established and the distance between water molecules and the BNNTs is decreased with increase of the surfactant concentration. The obtained results for the surfactant radius of gyration and the interfacial angle between two BNNTs reveal more information about the arrangement of the surfactants around the BNNTs in the presence and in the absence of water molecules.

Giant enhancement in vertical conductivity of stacked CVD graphene sheets by self-assembled molecular layers

Layer-by-layer-stacked chemical vapour deposition (CVD) graphene films find applications as transparent and conductive electrodes in solar cells, organic light-emitting diodes and touch panels. Common to lamellar-type systems with anisotropic electron delocalization, the plane-to-plane (vertical) conductivity in such systems is several orders lower than its in-plane conductivity. The poor electronic coupling between the planes is due to the presence of transfer process organic residues and trapped air pocket in wrinkles. Here we show the plane-to-plane tunnelling conductivity of stacked CVD graphene layers can be improved significantly by inserting 1-pyrenebutyric acid N-hydroxysuccinimide ester between the graphene layers. The six orders of magnitude increase in plane-to-plane conductivity is due to hole doping, orbital hybridization, planarization and the exclusion of polymer residues. Our results highlight the importance of interfacial modification for enhancing the performance of LBL-stacked CVD graphene films, which should be applicable to other types of stacked two-dimensional films.

On-chip graphene oxide aptasensor for multiple protein detection

The versatility of an on-chip graphene oxide (GO) aptasensor was successfully confirmed by the detection of three different proteins, namely, thrombin (TB), prostate specific antigen (PSA), and hemagglutinin (HA), simply by changing the aptamers but with the sensor composition remaining the same. The results indicate that both DNA and RNA aptamers immobilized on the GO surface are sufficiently active to realize an on-chip aptasensor. Molecular selectivity and concentration dependence were investigated in relation to TB and PSA detection by using a dual, triple, and quintuple microchannel configuration. The multiple target detection of TB and PSA on a single chip was also demonstrated by using a 2×3 linear-array GO aptasensor. This work enables us to apply this sensor to the development of a multicomponent analysis system for a wide variety of targets by choosing appropriate aptamers.

A study of planar anchor groups for graphene-based single-molecule electronics

To identify families of stable planar anchor groups for use in single molecule electronics, we report detailed results for the binding energies of two families of anthracene and pyrene derivatives adsorbed onto graphene. We find that all the selected derivatives functionalized with either electron donating or electron accepting substituents bind more strongly to graphene than the parent non-functionalized anthracene or pyrene. The binding energy is sensitive to the detailed atomic alignment of substituent groups over the graphene substrate leading to larger than expected binding energies for -OH and -CN derivatives. Furthermore, the ordering of the binding energies within the anthracene and pyrene series does not simply follow the electron affinities of the substituents. Energy barriers to rotation or displacement on the graphene surface are much lower than binding energies for adsorption and therefore at room temperature, although the molecules are bound to the graphene, they are almost free to move along the graphene surface. Binding energies can be increased by incorporating electrically inert side chains and are sensitive to the conformation of such chains.

Fully-drawn carbon-based chemical sensors on organic and inorganic surfaces

Mechanical abrasion is an extremely simple, rapid, and low-cost method for deposition of carbon-based materials onto a substrate. However, the method is limited in throughput, precision, and surface compatibility for drawing conductive pathways. Selective patterning of surfaces using laser-etching can facilitate substantial improvements to address these current limitations for the abrasive deposition of carbon-based materials. This study demonstrates the successful on-demand fabrication of fully-drawn chemical sensors on a wide variety of substrates (e.g., weighing paper, polymethyl methacrylate, silicon, and adhesive tape) using single-walled carbon nanotubes (SWCNTs) as sensing materials and graphite as electrodes. Mechanical mixing of SWCNTs with solid or liquid selectors yields sensors that can detect and discriminate parts-per-million (ppm) quantities of various nitrogen-containing vapors (pyridine, aniline, triethylamine).

Single walled carbon nanotube-based junction biosensor for detection of Escherichia coli

Foodborne pathogen detection using biomolecules and nanomaterials may lead to platforms for rapid and simple electronic biosensing. Integration of single walled carbon nanotubes (SWCNTs) and immobilized antibodies into a disposable bio-nano combinatorial junction sensor was fabricated for detection of Escherichia coli K-12. Gold tungsten wires (50 µm diameter) coated with polyethylenimine (PEI) and SWCNTs were aligned to form a crossbar junction, which was functionalized with streptavidin and biotinylated antibodies to allow for enhanced specificity towards targeted microbes. In this study, changes in electrical current (ΔI) after bioaffinity reactions between bacterial cells (E. coli K-12) and antibodies on the SWCNT surface were monitored to evaluate the sensor's performance. The averaged ΔI increased from 33.13 nA to 290.9 nA with the presence of SWCNTs in a 10⁸ CFU/mL concentration of E. coli, thus showing an improvement in sensing magnitude. Electrical current measurements demonstrated a linear relationship (R² = 0.973) between the changes in current and concentrations of bacterial suspension in range of 10²–10⁵ CFU/mL. Current decreased as cell concentrations increased, due to increased bacterial resistance on the bio-nano modified surface. The detection limit of the developed sensor was 10² CFU/mL with a detection time of less than 5 min with nanotubes. Therefore, the fabricated disposable junction biosensor with a functionalized SWCNT platform shows potential for high-performance biosensing and application as a detection device for foodborne pathogens.