Structural basis for sugar translocation through maltoporin channels at 3.1 A resolution

Crystal structure of human recombinant ornithine aminotransferase

Ornithine aminotransferase (OAT), a pyridoxal-5'-phosphate dependent enzyme, catalyses the transfer of the delta-amino group of L-ornithine to 2-oxoglutarate, producing L-glutamate-gamma-semialdehyde, which spontaneously cyclizes to pyrroline-5-carboxylate, and L-glutamate. The crystal structure determination of human recombinant OAT is described in this paper. As a first step, the structure was determined at low resolution (6 A) by molecular replacement using the refined structure of dialkylglycine decarboxylase as a search model. Crystallographic phases were then refined and extended in a step-wise fashion to 2.5 A by cyclic averaging of the electron density corresponding to the three monomers within the asymmetric unit. Interpretation of the resulting map was straightforward and refinement of the model resulted in an R-factor of 17.1% (Rfree=24.3%). The success of the procedure demonstrates the power of real-space molecular averaging even with only threefold redundancy. The alpha6-hexameric molecule is a trimer of intimate dimers with a monomer-monomer interface of 5500 A2 per subunit. The three dimers are related by an approximate 3-fold screw axis with a translational component of 18 A. The monomer fold is that of a typical representative of subgroup 2 aminotransferases and very similar to those described for dialkylglycine decarboxylase from Pseudomonas cepacia and glutamate-1-semialdehyde aminomutase from Synechococcus. It consists of a large domain that contributes most to the subunit interface, a C-terminal small domain most distant to the 2-fold axis and an N-terminal region that contains a helix, a loop and a three stranded beta-meander embracing a protrusion in the large domain of the second subunit of the dimer. The large domain contains the characteristic central seven-stranded beta-sheet (agfedbc) covered by eight helices in a typical alpha/beta fold. The cofactor pyridoxal-5'-phosphate is bound through a Schiff base to Lys292, located in the loop between strands f and g. The C-terminal domain includes a four-stranded antiparallel beta-sheet in contact with the large domain and three further helices at the far end of the subunit. The active sites of the dimer lie, about 25 A apart, at the subunit and domain interfaces. The conical entrances are on opposite sides of the dimer. In the active site, R180, E235 and R413 are probable substrate binding residues. Structure-based sequence comparisons with related transaminases in this work support that view. In patients suffering from gyrate atrophy, a recessive hereditary genetic disorder that can cause blindness in humans, ornithine aminotransferase activity is lacking. A large number of frameshift and point mutations in the ornithine aminotransferase gene have been identified in such patients. Possible effects of the various point mutations on the structural stability or the catalytic competence of the enzyme are discussed in light of the three-dimensional structure.

Maltose/maltodextrin system of Escherichia coli: transport, metabolism, and regulation

The maltose system of Escherichia coli offers an unusually rich set of enzymes, transporters, and regulators as objects of study. This system is responsible for the uptake and metabolism of glucose polymers (maltodextrins), which must be a preferred class of nutrients for E. coli in both mammalian hosts and in the environment. Because the metabolism of glucose polymers must be coordinated with both the anabolic and catabolic uses of glucose and glycogen, an intricate set of regulatory mechanisms controls the expression of mal genes, the activity of the maltose transporter, and the activities of the maltose/maltodextrin catabolic enzymes. The ease of isolating many of the mal gene products has contributed greatly to the understanding of the structures and functions of several classes of proteins. Not only was the outer membrane maltoporin, LamB, or the phage lambda receptor, the first virus receptor to be isolated, but also its three-dimensional structure, together with extensive knowledge of functional sites for ligand binding as well as for phage lambda binding, has led to a relatively complete description of this sugar-specific aqueous channel. The periplasmic maltose binding protein (MBP) has been studied with respect to its role in both maltose transport and maltose taxis. Again, the combination of structural and functional information has led to a significant understanding of how this soluble receptor participates in signaling the presence of sugar to the chemosensory apparatus as well as how it participates in sugar transport. The maltose transporter belongs to the ATP binding cassette family, and although its structure is not yet known at atomic resolution, there is some insight into the structures of several functional sites, including those that are involved in interactions with MBP and recognition of substrates and ATP. A particularly astonishing discovery is the direct participation of the transporter in transcriptional control of the mal regulon. The MalT protein activates transcription at all mal promoters. A subset also requires the cyclic AMP receptor protein for transcription. The MalT protein requires maltotriose and ATP as ligands for binding to a dodecanucleotide MalT box that appears in multiple copies upstream of all mal promoters. Recent data indicate that the ATP binding cassette transporter subunit MalK can directly inhibit MalT when the transporter is inactive due to the absence of substrate. Despite this wealth of knowledge, there are still basic issues that require clarification concerning the mechanism of MalT-mediated activation, repression by the transporter, biosynthesis and assembly of the outer membrane and inner membrane transporter proteins, and interrelationships between the mal enzymes and those of glucose and glycogen metabolism.

Novel aspects of the electrophysiology of mitochondrial porin

The recent findings that mitochondrial porin, VDAC, participates in supramolecular complexes and is present in the plasmamembrane need to be reconciled with its biophysical properties. We report here that VDAC often displays previously unobserved or unappreciated behaviors. Reconstituted VDAC can: a) exhibit fast gating when in any of many conductance substates; b) close completely, although briefly, on its own; c) close for a long periods, in the presence of König's polyanion; d) take several milliseconds to re-open when an applied transmembrane potential is switched off; e) be desensitized by prolonged exposure to high voltages, so that it will not re-open to the full conductance state upon subsequent return to zero voltage; f) display polarity-dependent voltage-induced closure. These behaviors are especially noticeable when the observations are conducted on a single reincorporated channel, suggesting that interactions between copies of VDAC may play a role in determining its electrophysiological properties. Any model of VDAC's structure, gating and function should take these observations into account.

Shear numbers of protein beta-barrels: definition refinements and statistics

The original definition of shear number for a beta-barrel is not unique if it contains one or more uneven beta-bulges. We define the shear number of a beta-barrel as the minimal change of residue numbers in the backbone direction for all closed paths on the beta-barrel. We also discuss how to overcome some computational difficulties. It is pointed out that some closed beta-sheets should not be considered as beta-barrels. The pertinent statistics obtained from a representative list of the Protein Data Bank entries are summarized. All beta-barrels have positive shear numbers, i.e. they are right-twisted. The shear numbers of most beta-barrels are even, but exceptions do exist. The sizes of beta-ladders in a beta-barrel vary significantly. Most beta-barrels contain uneven beta-bulges, which may have important biological functions.

Voltage-gating of Escherichia coli porin: a cystine-scanning mutagenesis study of loop 3

Porins, such as Escherichia coli OmpF, provide the only reported example of a voltage-gated channel where the three-dimensional structure is known to high resolution. Mutations that affect voltage-gating are clustered around the eyelet region, which is a mid-channel constriction caused by a polypeptide loop (L3) folding inside the lumen of this beta-barrel pore. These data, combined with molecular dynamics simulations, indicate that voltage-gating may involve L3 displacement. We have constructed six double cysteine OmpF mutants, five of which form disulphide bonds fixing L3 in the conformation determined by X-ray crystallography. These channels have altered single-channel conductances but unimpaired voltage-gating. The data show that L3 movement is not required for voltage-gating.

High-resolution crystal structures reveal how a cellulose chain is bound in the 50 A long tunnel of cellobiohydrolase I from Trichoderma reesei

Detailed information has been obtained, by means of protein X-ray crystallography, on how a cellulose chain is bound in the cellulose-binding tunnel of cellobiohydrolase I (CBHI), the major cellulase in the hydrolysis of native, crystalline cellulose by the fungus Trichoderma reesei. Three high-resolution crystal structures of different catalytically deficient mutants of CBHI in complex with cellotetraose, cellopentaose and cellohexaose have been refined at 1.9, 1.7 and 1.9 A resolution, respectively. The observed binding of cellooligomers in the tunnel allowed unambiguous identification of ten well-defined subsites for glucosyl units that span a length of approximately 50 A. All bound oligomers have the same directionality and orientation, and the positions of the glucosyl units in each binding site agree remarkably well between the different complexes. The binding mode observed here corresponds to that expected during productive binding of a cellulose chain. The structures support the hypothesis that hydrolysis by CBHI proceeds from the reducing towards the non-reducing end of a cellulose chain, and they provide a structural explanation for the observed distribution of initial hydrolysis products.

Structure of the sucrose-specific porin ScrY from Salmonella typhimurium and its complex with sucrose

The X-ray structure of a sucrose-specific porin (ScrY) from Salmonella typhimurium has been determined by multiple isomorphous replacement at 2.4 A resolution both in its uncomplexed form and with bound sucrose. ScrY is a noncrystallographic trimer of identical subunits, each with 413 structurally well-defined amino acids. A monomer is built up of 18 anti-parallel beta-strands surrounding a hydrophilic pore, with a topology closely similar to that of maltoporin. Two non-overlapping sucrose-binding sites were identified in difference Fourier maps. The higher permeability for sucrose of ScrY as compared to maltoporin is mainly accounted for by differences in their pore-lining residues.

Alginate production by Azotobacter vinelandii

Although all commercial alginates are today of algal origin, there is interest in the production of alginate-like polymers from bacteria. The species Azotobacter vinelandii seems to be the best candidate for the industrial production of alginate molecules characterized by a chemical composition, molecular mass and molecular mass distribution suited to a well defined application, especially required in the biotechnological, biomedical and pharmaceutical fields. The production of alginate by A. vinelandii has been to date widely investigated both in batch (mainly in the shaken flask scale) and in continuous cultures. This article summarizes current knowledge on the structure and properties of alginates and their applications and presents an overview of up-dated research on the physiology, genetics and kinetics of the production of alginate by Azotobacter vinelandii and its rheology, including the results of our recent studies.

Unliganded maltose-binding protein triggers lactose transport in an Escherichia coli mutant with an alteration in the maltose transport system

Escherichia coli accumulates malto-oligosaccharides by the maltose transport system, which is a member of the ATP-binding-cassette (ABC) superfamily of transport systems. The proteins of this system are LamB in the outer membrane, maltose-binding protein (MBP) in the periplasm, and the proteins of the inner membrane complex (MalFGK2), composed of one MalF, one MalG, and two MalK subunits. Substrate specificity is determined primarily by the periplasmic component, MBP. However, several studies of the maltose transport system as well as other members of the ABC transporter superfamily have suggested that the integral inner membrane components MalF and MalG may play an important role in determining the specificity of the system. We show here that residue L334 in the fifth transmembrane helix of MalF plays an important role in determining the substrate specificity of the system. A leucine-to-tryptophan alteration at this position (L334W) results in the ability to transport lactose in a saturable manner. This mutant requires functional MalK-ATPase activity and the presence of MBP, even though MBP is incapable of binding lactose. The requirement for MBP confirms that unliganded MBP interacts with the inner membrane MalFGK2 complex and that MBP plays a crucial role in triggering the transport process.

Interaction with a lipid membrane: a key step in bacterial toxins virulence

Bacterial toxins are secreted as soluble proteins. However, they have to interact with a cell lipid membrane either to permeabilize the cells (pore forming toxins) or to enter into the cytosol to express their enzymatic activity (translocation toxins). The aim of this review is to suggest that the strategies developed by toxins to insert in a lipid membrane is mediated by their structure. Two categories, which contains both pore forming and translocation toxins, are emerging: alpha helical proteins containing hydrophobic domains and beta sheets proteins in which no hydrophobicity can be clearly detected. The first category would rather interact with the membrane through multi-spanning helical domains whereas the second category would form a beta barrel in the membrane.

The filamentous phage pIV multimer visualized by scanning transmission electron microscopy

A family of homomultimeric outer-membrane proteins termed secretins mediates the secretion of large macromolecules such as enzymes and filamentous bacteriophages across bacterial outer membranes to the extracellular milieu. The secretin encoded by filamentous phage f1 was purified. Mass determination of individual molecules by scanning transmission electron microscopy revealed two forms, a unit multimer composed of about 14 subunits and a multimer dimer. The secretin is roughly cylindrical and has an internal diameter of about 80 angstroms, which is large enough to accommodate filamentous phage (diameter of 65 angstroms).

DNA translocation across planar bilayers containing Bacillus subtilis ion channels

The mechanisms by which genetic material crosses prokaryotic membranes are incompletely understood. We have developed a new methodology to study the translocation of genetic material via pores in a reconstituted system, using techniques from electrophysiology and molecular biology. We report here that planar bilayer membranes become permeable to double-stranded DNA (kilobase range) if Bacillus subtilis membrane vesicles containing high conductance channels have been fused into them. The translocation is an electrophoretic process, since it does not occur if a transmembrane electrical field opposing the movement of DNA, a polyanion, is applied. It is not an aspecific permeation through the phospholipid bilayer, since it does not take place if no proteins have been incorporated into the membrane. The transport is also not due simply to the presence of polypeptides in the membrane, since it does not occur if the latter contains gramicidin A or a eukaryotic, multi-protein vesicle fraction exhibiting 30-picosiemens anion-selective channel activity. The presence of DNA alters the behavior of the bacterial channels, indicating that it interacts with the pores and may travel through their lumen. These results support the idea that DNA translocation may take place through proteic pores and suggest that some of the high conductance bacterial channels observed in electrophysiological experiments may be constituents of the DNA translocating machinery in these organisms.

Probing the structural and functional domains of the CFTR chloride channel

The cystic fibrosis transmembrane conductance regulator (CFTR) forms an anion-selective channel involved in epithelial chloride transport. Recent studies have provided new insights into the structural determinants of the channel's functional properties, such as anion selectivity, single-channel conductance, and gating. Using the scanning-cysteine-accessibility method we identified 7 residues in the M1 membrane-spanning segment and 11 residues in and flanking the M6 segment that are exposed on the water-accessible surface of the protein; many of these residues may line the ion-conducting pathway. The pattern of the accessible residues suggests that these segments have a largely alpha-helical secondary structure with one face exposed in the channel lumen. Our results suggest that the residues at the cytoplasmic end of the M6 segment loop back into the channel, narrowing the lumen, and thereby forming both the major resistance to ion movement and the charge-selectivity filter.

Brucella Omp2a and Omp2b porins: single channel measurements and topology prediction

Brucella usually carry two highly homologous genes (omp2a and omp2b) for porin-like proteins. In several B. abortus biovars the omp2a gene has a large deletion compared to other Brucella omp2's. In this study we have measured Omp2 pore activity in planar bilayers. Omp2b exhibits well-defined trimeric channel activity whilst Omp2a forms monomeric pores of variable size which are smaller than Omp2b. No sequence homology exists between Omp2 and porins of known structure, so hydrophobic moment analysis has been used to model their membrane topology. From this it appears likely that the deletion removes the crucial L3 internal loop.

Engineering a tRNA and aminoacyl-tRNA synthetase for the site-specific incorporation of unnatural amino acids into proteins in vivo

In an effort to expand the scope of protein mutagenesis, we have completed the first steps toward a general method to allow the site-specific incorporation of unnatural amino acids into proteins in vivo. Our approach involves the generation of an "orthogonal" suppressor tRNA that is uniquely acylated in Escherichia coli by an engineered aminoacyl-tRNA synthetase with the desired unnatural amino acid. To this end, eight mutations were introduced into tRNA2Gln based on an analysis of the x-ray crystal structure of the glutaminyl-tRNA aminoacyl synthetase (GlnRS)-tRNA2Gln complex and on previous biochemical data. The resulting tRNA satisfies the minimal requirements for the delivery of an unnatural amino acid: it is not acylated by any endogenous E. coli aminoacyl-tRNA synthetase including GlnRS, and it functions efficiently in protein translation. Repeated rounds of DNA shuffling and oligonucleotide-directed mutagenesis followed by genetic selection resulted in mutant GlnRS enzymes that efficiently acylate the engineered tRNA with glutamine in vitro. The mutant GlnRS and engineered tRNA also constitute a functional synthetase-tRNA pair in vivo. The nature of the GlnRS mutations, which occur both at the protein-tRNA interface and at sites further away, is discussed.

Channel specificity: structural basis for sugar discrimination and differential flux rates in maltoporin

Maltoporin (LamB) facilitates the diffusion of maltodextrins across the outer membrane of E. coli. The structural basis for the specificity of the channel is investigated by X-ray structure analysis of maltoporin in complex with the disaccharides sucrose, trehalose, and melibiose. The sucrose complex, determined to 2.4 A resolution, shows that the glucosyl moiety is partly inserted into the channel constriction, while the bulky fructosyl residue appears to be hindered to enter the constriction, thus interfering with its further translocation. One of the glucosyl moieties of trehalose is found in a similar position as the glucosyl moiety of sucrose, whereas melibiose appears disordered when bound to maltoporin. A comparison with the previously reported maltoporin-maltose complex sheds light on the basis for sugar discrimination, and explains the different permeation rates observed for the saccharides.

Identification of a new porin, RafY, encoded by raffinose plasmid pRSD2 of Escherichia coli

The conjugative plasmid pRSD2 carries a raf operon that encodes a peripheral raffinose metabolic pathway in enterobacteria. In addition to the previously known raf genes, we identified another gene, rafY, which in Escherichia coli codes for an outer membrane protein (molecular mass, 53 kDa) similar in function to the known glycoporins LamB (maltoporin) and ScrY (sucrose porin). Sequence comparisons with LamB and ScrY revealed no significant similarities; however, both lamB and scrY mutants are functionally complemented by RafY. Expressed from the tac promoter, RafY significantly increases the uptake rates for maltose, sucrose, and raffinose at low substrate concentrations; in particular it shifts the apparent K(m) for raffinose transport from 2 mM to 130 microM. Moreover, RafY permits diffusion of the tetrasaccharide stachyose and of maltodextrins up to maltoheptaose through the outer membrane of E. coli. A comparison of all three glycoporins in regard to their substrate selectivity revealed that both ScrY and RafY have a broad substrate range which includes alpha-galactosides while LamB seems to be restricted to malto-oligosaccharides. It supports growth only on maltodextrins but not, like the others, on raffinose and stachyose.

Biphasic binding kinetics between FepA and its ligands

The Escherichia coli FepA protein is an energy- and TonB-dependent, ligand-binding porin that functions as a receptor for the siderophore ferric enterobactin and colicins B and D. We characterized the kinetic and thermodynamic parameters associated with the initial, energy-independent steps in ligand binding to FepA. In vivo experiments produced Kd values of 24, 185, and 560 nM for ferric enterobactin, colicin B, and colicin D, respectively. The siderophore and colicin B bound to FepA with a 1:1 stoichiometry, but colicin D bound to a maximum level that was 3-fold lower. Preincubation with ferric enterobactin prevented colicin B binding, and preincubation with colicin B prevented ferric enterobactin binding. Colicin B release from FepA was unexpectedly slow in vivo, about 10-fold slower than ferric enterobactin release. This slow dissociation of the colicin B.FepA complex facilitated the affinity purification of FepA and FepA mutants with colicin B-Sepharose. Analysis of a fluorescent FepA derivative showed that ferric enterobactin and colicin B adsorbed with biphasic kinetics, suggesting that both ligands bind in at least two distinct steps, an initial rapid stage and a subsequent slower step, that presumably establishes a transport-competent complex.

Oligomeric states and siderophore binding of the ligand-gated FhuA protein that forms channels across Escherichia coli outer membranes

The channel-forming FhuA protein, which translocates ferrichrome across Escherichia coli outer membranes, binds 1 mol ligand/mol monomer in detergent solution. The protein is homogenous and migrates as a single band with a mobility corresponding to 77 kDa in SDS/PAGE electrophoresis. Analytical ultracentrifugation revealed a monodisperse species (s(20,w) = 3.8 S) with a mass of 77,800 +/- 3200 Da. The properties of ligand binding, determined by two independent methods, revealed one binding site/monomer, but are complicated by a pronounced convexity of the Scatchard plot and a Hill coefficient calculated to be 2.5. This strongly suggests that oligomeric species are present. Cross-linking agents revealed the existence of possibly transient, mostly dimeric and trimeric species. The difference between the FhuA protein in detergent solution and in its native membrane environment may be related to the removal of lateral pressure that exists in situ.

Electron and atomic force microscopy of membrane proteins

Electron crystallography is becoming a powerful tool for the resolution of membrane protein structures. The past year has seen the production of a bacteriorhodopsin model at 3.5 A and the structure of aquaporin 1 approaching atomic resolution. Determination of surface topographies of 2D crystals using the atomic force microscope is similarly advancing to a level that reveals submolecular details. As the latter is operated in solution, membrane proteins can be observed at work.

Stabilising and destabilising modifications of cysteines in the E. coli outer membrane porin protein OmpC

Three sulfhydryl labels were used to modify two mutated sites, R37C and R74C in the eyelet of the outer membrane porin OmpC. Modification of R37C with the neutral groups Aldrithiol and bimane increases thermal stability but the negatively charged iodoacetate causes a decrease in thermal stability. The effects of substitution at R74C were less significant. Bimane labelling increases the voltage sensitivity and decreases the single channel conductance at R37C asymmetrically with smaller channels being recorded at cis negative voltages. Negatively charged acetate does not affect the voltage gating.

An outer-membrane porin inducible by short-chain amides and urea in the methylotrophic bacterium Methylophilus methylotrophus

The fmdA and fmdB genes encoding formamidase and a putative regulatory protein, respectively, from the methylotrophic bacterium Methylophilus methylotrophus were recloned with additional flanking DNA (pSW1). fmdC, encoding a weakly hydrophilic protein containing an N-terminal signal sequence, was identified upstream of fmdAB. The derived amino acid sequence of mature FmdC (M(r) 39204) showed that it was rich in beta-sheet and aromatic amino acids, and exhibited significant similarities to several outer-membrane porins from other bacteria. Cell fractionation studies showed that the protein was located in the outer membrane. Mature FmdC was purified and shown to consist of a single type of subunit (M(r) 40,000) with the predicted N-terminal amino acid sequence (GATISF-). SDS-PAGE and Western blotting of cells grown in continuous culture under various conditions showed that mature FmdC was induced by formamide, acetamide and urea, repressed by excess ammonia, and over-expressed during prolonged growth under formamide limitation. It is concluded that mature FmdC is a porin involved in the transport of short-chain amides and urea through the outer membrane of M. methylotrophus under conditions where these nitrogen sources are present at very low concentration.

Further genetic analysis of the C-terminal external loop region in Escherichia coli maltoporin

LamB specifically facilitates the diffusion of maltose and maltodextrins through the bacterial outer membrane, and acts as a general (i.e. non-specific) porin for small hydrophilic molecules (< 600 daltons). We reported previously that deletion of the last predicted external domain near the C-terminus of the Eschirichia coli LamB protein (residues 376 to 405), affected in vivo the binding and transport of maltodextrins (specific pore functions), and also increased bacterial sensitivity to large antibiotics. The residues covered by this deletion correspond almost exactly to the major cell surface loop of LamB on the structural model based on X-ray crystallography (loop L9, residues 375 to 405). The L9 loop comprises a large central portion, which varies in size and sequence between the LamB proteins from different species. This variable region is flanked by two highly charged and conserved portions, which overlap with the adjacent beta strands. To identify subregions in L9 that influence the pore properties of LamB, we constructed and analysed nine mutants in loop L9 and its flanking sequences. Deletion of the 23-amino-acids central variable portion of the loop (residues 379 to 401), and deletion of the downstream conserved region (residues 402 to 409), only moderately affected specific maltoporin function. In contrast, deletion of the conserved region (residues 372 to 378) upstream of the variable portion strongly decreased specific maltoporin function and also increased sensitivity to large antibiotics, accounting for most, if not all, of the effects of the complete deletion of L9.

Porins of Haemophilus influenzae type b mutated in loop 3 and in loop 4

Porin (341 amino acids; mass of 37,782 Da) in the outer membrane of Haemophilus influenzae type b (Hib) permits diffusion into the periplasm of small solutes up to a molecular mass of 1400 Da. Molecular modeling of Hib porin identified its structural similarities to OmpF of Escherichia coli and disclosed for Hib porin a shorter length of loop 3 and a longer length of loop 4. By site-directed mutagenesis of the porin gene ompP2, mutant porins were constructed to contain 6 or 12 amino acid deletions either in loop 3 or in surface-exposed loop 4. Wild type Hib porin and mutant porins were expressed in a nontypeable H. influenzae strain deleted for the ompP2 gene. The mutant porins were purified and reconstituted into planar bilayers, tested for channel formation and compared with wild type Hib porin. Mutant Haemophilus porin possessing a 6-amino acid deletion in loop 3 displayed a broad distribution of single channel conductance values, while deletion of 12 amino acids from the same loop destabilized the porin channel. By comparison, deletion of 6 or of 12 amino acids from loop 4 of Hib porin resulted in an increased single channel conductance (1.15 and 1.05 nanosiemens, respectively) compared with wild type Hib porin (0. 85 nanosiemens). The C3 epitope of the poliovirus VP1 capsid protein was inserted either into loop 3 or into loop 4 of Hib porin. By flow cytometry, the C3 epitope was detected as surface-exposed in strains expressing C3 insertion in loop 4; in strains expressing C3 insertion in loop 3, the epitope was inaccessible. We propose that loop 4 of Hib porin, although surface-accessible, is oriented toward the central axis of the pore and that deletions in this loop increase the single channel conductance by widening the pore entrance.

Ligand-specific opening of a gated-porin channel in the outer membrane of living bacteria

Ligand-gated membrane channels selectively facilitate the entry of iron into prokaryotic cells. The essential role of iron in metabolism makes its acquisition a determinant of bacterial pathogenesis and a target for therapeutic strategies. In Gram-negative bacteria, TonB-dependent outer membrane proteins form energized, gated pores that bind iron chelates (siderophores) and internalize them. The time-resolved operation of the Escherichia coli ferric enterobactin receptor FepA was observed in vivo with electron spin resonance spectroscopy by monitoring the mobility of covalently bound nitroxide spin labels. A ligand-binding surface loop of FepA, which normally closes its transmembrane channel, exhibited energy-dependent structural changes during iron and toxin (colicin) transport. These changes were not merely associated with ligand binding, but occurred during ligand uptake through the outer membrane bilayer. The results demonstrate by a physical method that gated-porin channels open and close during membrane transport in vivo.

Computer simulations of the OmpF porin from the outer membrane of Escherichia coli

Molecular dynamics simulations were used to study the structure and dynamics of the Escherichia coli OmpF porin, which is composed of three identical 16-stranded beta-barrels. Simulations of the full trimer in the absence of water and the membrane led to significant contraction of the channel in the interior of each beta-barrel. With very weak harmonic constraints (0.005 kcal/mol A2/atom) applied to the main-chain C alpha atoms of the beta-barrel, the structure was stabilized without alteration of the average fluctuations. The resulting distribution of the fluctuations (small for beta-strands, large for loops and turns) is in good agreement with the x-ray B factors. Dynamic cross-correlation functions showed the importance of coupling between the loop motions and barrel flexibility. This was confirmed by the application of constraints corresponding to the observed temperature factors to the barrel C alpha atoms. With these constraints, the beta-barrel fluctuations were much smaller than the experimental values because of the intrinsic restrictions on the atomic motions, and the loop motions were reduced significantly. This result indicates that considerable care is required in introducing constraints to keep proteins close to the experimental structure during simulations, as has been done in several recent studies. Loop 3, which is thought to be important in gating the pore, undergoes a displacement that shifts it away from the x-ray structure. Analysis shows that this arises from the breakdown of a hydrogen bond network, which appears to result more from the absence of solvent that from the use of standard ionization states for the side chains of certain beta-barrel residues.

Energy profile of maltooligosaccharide permeation through maltoporin as derived from the structure and from a statistical analysis of saccharide-protein interactions

The crystal structure of the maltodextrin-specific porin from Salmonella typhimurium ligated with a maltotrioside at the pore eyelet is known at 2.4 A resolution. The three glucose units assume a conformation close to the natural amylose helix. The pore eyelet fits exactly the cross-section of a maltooligosaccharide chain and thus functions as a constraining orifice. The oligomer permeates the membrane by screwing along the amylose helix through this orifice. Because each glucose glides along the given helix, its interactions can be sampled at any point along the pathway. The interactions are mostly hydrogen bonds, but also contacts to aromatic rings at one side of the pore. We have derived the energy profile of a gliding maltooligosaccharide by following formation and breakage of hydrogen bonds and by assessing the saccharide-aromatics interactions from a statistical analysis of saccharide binding sites in proteins. The resulting profile indicates smooth permeation despite extensive hydrogen bonding at the orifice.

Double mutagenesis of a positive charge cluster in the ligand-binding site of the ferric enterobactin receptor, FepA

Siderophores and colicins enter bacterial cells through TonB-dependent outer membrane proteins. Using site-directed substitution mutagenesis, we studied ligand recognition by a prototypic Escherichia coli siderophore receptor, FepA, that binds the iron chelate ferric enterobactin and colicins B and D. These genetic experiments identified a common binding site for two of the three ligands, containing multiple positive charges, within cell surface residues of FepA. Elimination of single residues in this region did not impair the adsorption or transport of ferric enterobactin, but double mutagenesis in the charge cluster identified amino acids (Arg-286 and Arg-316) that participate in siderophore binding and function in FepA-mediated killing by colicins B and D. Ferric enterobactin binding, furthermore, prevented covalent modification of FepA within this domain by either a fluorescent probe or an arginine-specific reagent, corroborating the involvement of this site in ligand recognition. These results identify, for the first time, residues in a TonB-dependent outer membrane protein that participate in ligand binding. They also explain the competition between ferric enterobactin and the colicins on the bacterial cell surface: all three ligands interact with the same arginine residues within FepA during their penetration through the outer membrane.

Structural and functional characterization of a recombinant PorB class 2 protein from Neisseria meningitidis. Conformational stability and porin activity

An outer membrane PorB class 2 protein from Neisseria meningitidis has been overexpressed in Escherichia coli, isolated from inclusion bodies, and refolded in the presence of zwitterionic detergent. The purified recombinant and native (strain M986) counterpart exhibit most of the typical functional and structural properties that are characteristic of bacterial porins. Channel forming activity has been monitored by incorporating class 2 into reconstituted liposomes and measuring the permeation rates of various oligosaccharides through the proteoliposomes to derive a pore diameter of approximately 1.6 nm. Structural studies employing a combination of spectroscopic and electrophoretic techniques reveal that recombinant and native class 2 are identical in terms of overall conformational stability. Both proteins form stable trimers in zwitterionic detergent and retain significant secondary and tertiary structure in the presence of SDS. The thermal unfolding of zwittergen-solubilized class 2 trimers (Tm = 88 degrees C) is reversible and characterized by solvent exposure of aromatic residues with concomitant disruption of tertiary and partial loss of secondary structures. SDS-induced destabilization and irreversible unfolding of the native trimeric assembly occurs at temperatures above 60 degrees C. Our physicochemical studies of PorB class 2 protein furnish significant insight regarding the structural and functional properties of this meningococcal outer membrane protein within the porin superfamily.

Molecular cloning and functional characterization of the Paracoccus denitrificans porin

Bacterial porins facilitate the passive uptake of small solutes across the outer membrane of the cell. The channel properties and the primary structure of the porin from Paracoccus denitrificans were investigated. As judged from single-channel conductance experiments, this porin forms trimeric pores that show no ion selectivity in potassium chloride solution, which indicates that the charges within or near the channel are balanced. Based on peptide fragment sequence, the gene porG, which codes for this general pore protein, was cloned and analyzed. Its primary translation product contains a 20-residue signal sequence, followed by the 295 amino acids of the mature protein with a molecular mass of 31.9 kDa. Sequence alignments with porins from Rhodopseudomonas blastica and Rhodobacter capsulatus and secondary structure predictions suggest a typical rigid barrel structure consisting of 16 antiparallel beta-strands.

Module swaps between related translocator proteins pIV(f1), pIV(IKe) and PulD: identification of a specificity domain

In Gram-negative bacteria, type II and type III secretion and filamentous phage assembly systems use related outer membrane proteins for substrate-specific transport across the outer membrane. We show here that the specificity domain of the phage f1 outer membrane protein pIV is contained within the 149 N-terminal amino acid residues. When the pIV(f1) specificity domain is fused to the translocator domain of the related pIV of phage IKe, the chimeric construct supports f1 but not IKe assembly. Functional coupling between the two domains in this chimeric construct is poor and is improved by a single amino acid change in the translocator domain of the pIV(IKe). In native pIV(IKe), two amino acid changes within its specificity domain are both necessary and sufficient to change the specificity from IKe to f1 assembly. Analysis of 39 chimeric constructs between pIV(f1) and the outer membrane protein PulD of the pullulanase secretion system failed to identify a comparable exchangeable specificity domain. These results indicate that the two domains may not function autonomously, and suggest that tertiary and quarternary changes of the entire translocator component rather than of an autonomous functional domain are required for specific translocation across the outer membrane.

Structure of maltoporin from Salmonella typhimurium ligated with a nitrophenyl-maltotrioside

The maltodextrin-specific (malto-)porin from Salmonella typhimurium has been crystallized. Its three-dimensional structure was determined at 2.4 A resolution (1 A = 0.1 nm). A comparison with the structure of the homologous porin from Escherichia coli as well as with the sequences of other related porins showed that there are regions of appreciable sequence and structure variability, despite close overall similarity. The maltoporin structure was analyzed with a bound nitrophenyl-maltotrioside as well as without ligand. Maltotrioside binding had a negligible effect on the polypeptide structure. It binds at the pore eyelet assuming a conformation close to the natural amylose helix.

A novel method for structure-based prediction of ion channel conductance properties

A rapid and easy-to-use method of predicting the conductance of an ion channel from its three-dimensional structure is presented. The method combines the pore dimensions of the channel as measured in the HOLE program with an Ohmic model of conductance. An empirically based correction factor is then applied. The method yielded good results for six experimental channel structures (none of which were included in the training set) with predictions accurate to within an average factor of 1.62 to the true values. The predictive r2 was equal to 0.90, which is indicative of a good predictive ability. The procedure is used to validate model structures of alamethicin and phospholamban. Two genuine predictions for the conductance of channels with known structure but without reported conductances are given. A modification of the procedure that calculates the expected results for the effect of the addition of nonelectrolyte polymers on conductance is set out. Results for a cholera toxin B-subunit crystal structure agree well with the measured values. The difficulty in interpreting such studies is discussed, with the conclusion that measurements on channels of known structure are required.

Short hydrophobic segments in the mature domain of ProOmpA determine its stepwise movement during translocation across the cytoplasmic membrane of Escherichia coli

Based on the finding that a series of engineered proOmpAs containing disulfide-bridged loops of different sizes at different positions exhibits a discontinuous mode of polypeptide transit across the cytoplasmic membrane of Escherichia coli, we suggested previously that the translocation of preproteins takes place at every 30 amino acid residues (Uchida, K., Mori, H., and Mizushima, S. (1995) J. Biol. Chem. 270, 30862-30868). In the present study, we investigated the molecular mechanism underlying this stepwise translocation. Deletion or relocation of hydrophobic segments of the mature domain of proOmpA (H1, residues 233-237; H2, residues 261-265) significantly altered the pattern of the stepwise translocation. The stepwise mode of polypeptide insertion was also observed with reconstituted proteoliposomes comprising purified SecA, SecY, and SecE. Cross-linking experiments involving a photoactivable cross-linker revealed that SecY and SecA are the components which interact with the hydrophobic segment of proOmpA. The present results indicate that the hydrophobic segments of the mature domains of preproteins interact with membrane embedded translocase during polypeptide transit across the membrane, which causes a discontinuous mode of polypeptide movement.

Autodisplay: one-component system for efficient surface display and release of soluble recombinant proteins from Escherichia coli

The immunoglobulin A protease family of secreted proteins are derived from self-translocating polyprotein precursors which contain C-terminal domains promoting the translocation of the N-terminally attached passenger domains across gram-negative bacterial outer membranes. Computer predictions identified the C-terminal domain of the Escherichia coli adhesin involved in diffuse adherence (AIDA-I) as a member of the autotransporter family. A model of the beta-barrel structure, proposed to be responsible for outer membrane translocation, served as a basis for the construction of fusion proteins containing heterologous passengers. Autotransporter-mediated surface display (autodisplay) was investigated for the cholera toxin B subunit and the peptide antigen tag PEYFK. Up to 5% of total cellular protein was detectable in the outer membrane as passenger autotransporter fusion protein synthesized under control of the constitutive P(TK) promoter. Efficient presentation of the passenger domains was demonstrated in the outer membrane protease T-deficient (ompT) strain E. coli UT5600 and the ompT dsbA double mutant JK321. Surface exposure was ascertained by enzyme-linked immunosorbent assay, immunofluorescence microscopy, and immunogold electron microscopy using antisera specific for the passenger domains. In strain UT2300 (ompT+), the passenger domains were released from the cell surface by the OmpT protease at a novel specific cleavage site, R / V. Autodisplay represents a useful tool for future protein translocation studies with interesting biotechnological possibilities.

The nucleoside-specific Tsx channel from the outer membrane of Salmonella typhimurium, Klebsiella pneumoniae and Enterobacter aerogenes: functional characterization and DNA sequence analysis of the tsx genes

The Escherichia coli tsx gene encodes an integral outer-membrane protein (Tsx) that functions as a substrate-specific channel for deoxynucleosides and the antibiotic albicidin, and also serves as a receptor for bacteriophages and colicins. We cloned the structural genes of the Tsx proteins from Salmonella typhimurium, Klebsiella pneumoniae and Enterobacter aerogenes and expressed them in an E.coli tsx mutant. The heterologous Tsx proteins fully substituted the E.coli Tsx protein with respect to its function in deoxynucleoside and albicidin uptake, and as receptor for colicin K. The Tsx proteins from K. pneumoniae and Ent. aerogenes were also proficient as receptors for several Tsx-specific bacteriophages, whereas the corresponding protein from S. typhimurium did not confer sensitivity against these phages. The nucleotide sequence of the tsx genes from S. typhimurium, K. pneumoniae and Ent. aerogenes was established. Each of the Tsx proteins is initially synthesized with typical bacterial signal sequence peptides and the predicted mature forms of the Tsx proteins have a calculated M(r) of 30,567 (265 residues), 31,412 (272 residues) and 31,477 (272 residues), respectively. Multiple sequence alignments between the Tsx proteins showed a high degree of sequence identity and revealed the presence of four hypervariable regions, which are thought to constitute segments of the polypeptide chain exposed at the cell surface. Most notable was a deletion of 8 amino acids in one of these hypervariable domains in the S. typhimurium Tsx protein. When this deletion was introduced by site-directed mutagenesis into the corresponding region of the E.coli tsx gene, the mutant Tsx-515 protein lost its phage receptor function but still served as a colicin K receptor and as a substrate-specific channel, indicating that the region between residues 198 and 207 might be part of the bacteriophage receptor area. Multiple sequence alignments, structural predictions and the properties of previously characterized Tsx missense mutants were taken into account to develop a two-dimensional model for the topological organization of the Tsx protein within the outer membrane.

Modeling ligand-gated receptor activity. FhuA-mediated ferrichrome efflux from lipid vesicles triggered by phage T5

An in vitro assay of iron-ferrichrome translocation across the FhuA protein of outer membranes from Escherichia coli has been devised. Upon reconstitution into large lipid vesicles, bacteriophage T5 binds to this polyvalent receptor, triggering a conformational change that resulted in channel opening. This facilitates the translocation of an iron(III)-siderophore, without the complexities involved in the in vivo process. Efflux of 55Fe(III)-ferrichrome across FhuA channels was determined quantitatively by monitoring the release of trapped radioactivity. The assay is rapid, reliable, and specific, because other bacteriophages, such as Phi80, fail to trigger channel opening of the FhuA receptor.

Protein folds in the all-beta and all-alpha classes

Analysis of the structures in the Protein Databank, released in June 1996, shows that the number of different protein folds, i.e. the number of different arrangements of major secondary structures and/or chain topologies, is 327. Of these folds, approximately 25% belong to the all-alpha class, 20% belong to the all-beta class, 30% belong to the alpha/beta class, and 25% belong to the alpha + beta class. We describe the types of folds now known for the all-beta and all-alpha classes, emphasizing those that have been discovered recently. Detailed theories for the physical determinants of the structures of most of these folds now exist, and these are reviewed.

SurA, a periplasmic protein with peptidyl-prolyl isomerase activity, participates in the assembly of outer membrane porins

Little is known about either the process of periplasmic protein folding or how information concerning the folding state in this compartment is communicated. We present evidence that SurA, a periplasmic protein with peptidyl-prolyl isomerase activity, is involved in the maturation and assembly of LamB. LamB is a trimeric outer membrane porin for maltodextrins as well as the bacteriophage lambda receptor in Escherichia coli. We demonstrate that SurA is involved in the conversion of unfolded monomers into a newly identified intermediate in LamB assembly, which behaves as a folded monomer. The absence of SurA blocks the assembly pathway and leads to accumulation of species prior to the folded monomer. These species also accumulate when the stress sigma factor sigmaE is induced by LamB overexpression. We suggest that accumulation of species prior to the generation of folded monomer is a stress signal sensed by sigmaE.

Structure of staphylococcal alpha-hemolysin, a heptameric transmembrane pore

The structure of the Staphylococcus aureus alpha-hemolysin pore has been determined to 1.9 A resolution. Contained within the mushroom-shaped homo-oligomeric heptamer is a solvent-filled channel, 100 A in length, that runs along the sevenfold axis and ranges from 14 A to 46 A in diameter. The lytic, transmembrane domain comprises the lower half of a 14-strand antiparallel beta barrel, to which each protomer contributes two beta strands, each 65 A long. The interior of the beta barrel is primarily hydrophilic, and the exterior has a hydrophobic belt 28 A wide. The structure proves the heptameric subunit stoichiometry of the alpha-hemolysin oligomer, shows that a glycine-rich and solvent-exposed region of a water-soluble protein can self-assemble to form a transmembrane pore of defined structure, and provides insight into the principles of membrane interaction and transport activity of beta barrel pore-forming toxins.

Molecular characterization and organization of porin from Rhodobacter capsulatus strain 37B4

The primary and atomic structures of the porin protein from Rhodobacter (Rb.) capsulatus strain 37b4 were determined several years ago by peptide sequencing and X-ray crystallography. In this work the gene encoding this porin (named porCa) was cloned and sequenced. The porin open reading frame encodes 320 amino acids-a mature protein of 300 residues (molecular mass 31 552 kDa) and a presequence of 20 amino acids. Our deduced amino-acid sequence was directly confirmed by purifying the porin protein from the same bacterial strain and sequencing the amino terminus as well as several peptides derived from trypsin digestion. However, comparison of this deduced amino-acid sequence with the published primary structure of this porin, nominally from the same strain (but cultivated for ca. 30 years in a different laboratory) reveals seven differences in the amino-acid sequence at the following positions in the mature protein (published/present): 59 (Gly/Ala), 123 (Tyr/Asn), 135 Ser/Thr), 189 (Ile/Val), 196 (Asn/His), 231 (Ala/Thr) and 238 (Ser/deleted). Surprisingly, analysis of the positioning of these mutations revealed that they are located exclusively on transmembrane strands, with two of them deeply buried within the structure. These mutations may in fact have only marginal influence on porin structure and function. Northern blot analysis revealed that porCa encodes an RNA transcript of 1070 nucleotides. No differential response in the abundance or size of this mRNA was seen upon growth under phototrophic/anaerobic vs. chemotrophic/aerobic conditions, under high or low osmotic pressure. Primer extension experiments revealed a transcription start site 73 bases upstream from the ATG translation start, juxtaposed to the identified putative promoter region. Fusion of lacZ with this putative promoter region (using a 288-bp upstream region) revealed similar promoter activity in beta-galactosidase assays under both physiological conditions tested, again suggesting that this gene is constitutively expressed. The molecular genetic characterization described in this work opens the way for structure-function studies by site-directed mutagenesis.

HOLE: a program for the analysis of the pore dimensions of ion channel structural models

A method (HOLE) that allows the analysis of the dimensions of the pore running through a structural model of an ion channel is presented. The algorithm uses a Monte Carlo simulated annealing procedure to find the best route for a sphere with variable radius to squeeze through the channel. Results can be displayed in a graphical fashion or visualized with most common molecular graphical packages. Advances include a method to analyze the anisotropy within a pore. The method can also be used to predict the conductance of channels using a simple empirically corrected ohmic model. As an example the program is applied to the cholera toxin B-subunit pentamer. The compatibility of the crystal structure and conductance data is established.

The levanase operon of Bacillus subtilis expressed in Escherichia coli can substitute for the mannose permease in mannose uptake and bacteriophage lambda infection

Bacteriophage lambda adsorbs to its Escherichia coli K-12 host by interacting with LamB, a maltose- and maltodextrin-specific porin of the outer membrane. LamB also serves as a receptor for several other bacteriophages. Lambda DNA requires, in addition to LamB, the presence of two bacterial cytoplasmic integral membrane proteins for penetration, namely, the IIC(Man) and IID(Man) proteins of the E. coli mannose transporter, a member of the sugar-specific phosphoenolpyruvate:sugar phosphotransferase system (PTS). The PTS transporters for mannose of E. coli, for fructose of Bacillus subtilis, and for sorbose of Klebsiella pneumoniae were shown to be highly similar to each other but significantly different from other PTS transporters. These three enzyme II complexes are the only ones to possess distinct IIC and IID transmembrane proteins. In the present work, we show that the fructose-specific permease encoded by the levanase operon of B. subtilis is inducible by mannose and allows mannose uptake in B. subtilis as well as in E. coli. Moreover, we show that the B. subtilis permease can substitute for the E. coli mannose permease cytoplasmic membrane components for phage lambda infection. In contrast, a series of other bacteriophages, also using the LamB protein as a cell surface receptor, do not require the mannose transporter for infection.