Carbohydrate binding modules: biochemical properties and novel applications

Quantification of the CBD-FITC conjugates surface coating on cellulose fibres

Background

Cellulose Binding Domains (CBD) were conjugated with fluorescein isothiocyanate (FITC). The surface concentration of the Binding Domains adsorbed on cellulose fibres was determined by fluorescence image analysis.

Results

For a CBD-FITC concentration of 60 mg/L, a coating fraction of 78% and 110% was estimated for Portucel and Whatman fibres, respectively. For a saturating CBD concentration, using Whatman CF11 fibres, a surface concentration of 25.2 × 10^-13 mol/mm² was estimated, the equivalent to 4 protein monolayers. This result does not imply the existence of several adsorbed protein layers.

Conclusion

It was verified that CBDs were able to penetrate the fibres, according to confocal microscopy and TEM-immunolabelling analysis. The surface concentration of adsorbed CBDs was greater on amorphous fibres (phosphoric acid swollen) than on more crystalline ones (Whatman CF11 and Sigmacell 20).

A glycosyltransferase with a length-controlling activity as a mechanism to regulate the size of polysaccharides

Cyclic beta-1,2-glucans (CbetaG) are osmolyte homopolysaccharides with a cyclic beta-1,2-backbone of 17-25 glucose residues present in the periplasmic space of several bacteria. Initiation, elongation, and cyclization, the three distinctive reactions required for building the cyclic structure, are catalyzed by the same protein, the CbetaG synthase. The initiation activity catalyzes the transference of the first glucose from UDP-glucose to a yet-unidentified amino acid residue in the same protein. Elongation proceeds by the successive addition of glucose residues from UDP-glucose to the nonreducing end of the protein-linked beta-1,2-oligosaccharide intermediate. Finally, the protein-linked intermediate is cyclized, and the cyclic glucan is released from the protein. These reactions do not explain, however, the mechanism by which the number of glucose residues in the cyclic structure is controlled. We now report that control of the degree of polymerization (DP) is carried out by a beta-1,2-glucan phosphorylase present at the CbetaG synthase C-terminal domain. This last activity catalyzes the phosphorolysis of the beta-1,2-glucosidic bond at the nonreducing end of the linear protein-linked intermediate, releasing glucose 1-phosphate. The DP is thus regulated by this "length-controlling" phosphorylase activity. To our knowledge, this is the first description of a control of the DP of homopolysaccharides.

A secondary xylan-binding site enhances the catalytic activity of a single-domain family 11 glycoside hydrolase

Bacillus circulans xylanase (BcX) is a single-domain family 11 glycoside hydrolase. Using NMR-monitored titrations, we discovered that an inactive variant of this enzyme, E78Q-BcX, bound xylooligosaccharides not only within its pronounced active site (AS) cleft, but also at a distal surface region. Chemical shift perturbation mapping and affinity electrophoresis, combined with mutational studies, identified the xylan-specific secondary binding site (SBS) as a shallow groove lined by Asn, Ser, and Thr residues and with a Trp at one end. The AS and SBS bound short xylooligosaccharides with similar dissociation constants in the millimolar range. However, the on and off-rates to the SBS were at least tenfold faster than those of kon approximately 3x10(5) M(-1) s(-1) and koff approximately 1000 s(-1) measured for xylotetraose to the AS of E78Q-BcX. Consistent with their structural differences, this suggests that a conformational change in the enzyme and/or the substrate is required for association to and dissociation from the deep AS, but not the shallow SBS. In contrast to the independent binding of small xylooligosaccharides, high-affinity binding of soluble and insoluble xylan, as well as xylododecaose, occurred cooperatively to the two sites. This was evidenced by an approximately 100-fold increase in relative Kd values for these ligands upon mutation of the SBS. The SBS also enhances the activity of BcX towards soluble and insoluble xylan through a significant reduction in the Michaelis KM values for these polymeric substrates. This study provides an unexpected example of how a single domain family 11 xylanase overcomes the lack of a carbohydrate-binding module through the use of a secondary binding site to enhance substrate specificity and affinity.

A novel cell surface-anchored cellulose-binding protein encoded by the sca gene cluster of Ruminococcus flavefaciens

Ruminococcus flavefaciens produces a cellulosomal enzyme complex, based on the structural proteins ScaA, -B, and -C, that was recently shown to attach to the bacterial cell surface via the wall-anchored protein ScaE. ScaA, -B, -C, and -E are all cohesin-bearing proteins encoded by linked genes in the sca cluster. The product of an unknown open reading frame within the sca cluster, herein designated CttA, is similar in sequence at its C terminus to the corresponding region of ScaB, which contains an X module together with a dockerin sequence. The ScaB-XDoc dyad was shown previously to interact tenaciously with the cohesin of ScaE. Likewise, avid binding was confirmed between purified recombinant fragments of the CttA-XDoc dyad and the ScaE cohesin. In addition, the N-terminal regions of CttA were shown to bind to cellulose, thus suggesting that CttA is a cell wall-anchored, cellulose-binding protein. Proteomic analysis showed that the native CttA protein ( approximately 130 kDa) corresponds to one of the three most abundant polypeptides binding tightly to insoluble cellulose in cellulose-grown R. flavefaciens 17 cultures. Interestingly, this protein was also detected among cellulose-bound proteins in the related strain R. flavefaciens 007C but not in a mutant derivative, 007S, that was previously shown to have lost the ability to grow on dewaxed cotton fibers. In R. flavefaciens, the presence of CttA on the cell surface is likely to provide an important mechanism for substrate binding, perhaps compensating for the absence of an identified cellulose-binding module in the major cellulosomal scaffolding proteins of this species.

Isolation of cellulolytic enzymes from moldy silage by new culture-independent strategy

A culture-independent strategy has been developed for investigation of cellulases in moldy silage. By the qualitative differences in the adsorption of cellulases on lingo-cellulosics, a new cellobiohydrolase (CBH) with apparent molecular mass of 194 kDa was isolated and characterized. The entire extracellular proteins of silage were separated by two-dimensional gel electrophoresis, and five potential endoglucanases were identified by activity staining. These results demonstrate the feasibility of direct screening cellulases from environment without microorganism cultivation and this strategy could be expected to facilitate the research of uncultured microorganisms.

Fusion to a pull-down domain: a novel approach of producingTrigonopsis variabilisD-amino acid oxidase as insoluble enzyme aggregates

Insoluble protein particles showing high specific enzyme activity are potentially useful biocatalysts. The commercialized crosslinked enzyme crystals and aggregates have the disadvantage that their preparation requires isolation of the protein before the critical precipitation step. We introduce a novel concept of controlled precipitation in vivo in which the target enzyme is fused to the cellulose-binding domain (CBD) of Clostridium cellulovorans, and expression in Escherichia coli is performed under conditions that induce selective pull down of the folded chimeric protein via intermolecular self-aggregation of the CBD. The case of D-amino acid oxidase from Trigonopsis variabilis shows that upon fusion of the CBD to its N-terminus, the otherwise mainly soluble recombinant enzyme was quantitatively precipitated in protein particles, which displayed 40% of the specific activity of the highly purified oxidase. By contrast, inclusion bodies derived from an enzyme chimera, which harbored a C-terminal peptide tag, showed only little oxidase activity (<or= 10%). The aggregated CBD retained the ability to bind microcrystalline cellulose and flocculated polysaccharide particles upon attachment to them. The cellulose-bound oxidase was stabilized about 36 times against inactivation of the soluble enzyme during conversion of D-methionine and bubble aeration.

Direct demonstration of the flexibility of the glycosylated proline-threonine linker in the Cellulomonas fimi Xylanase Cex through NMR spectroscopic analysis

The modular xylanase Cex (or CfXyn10A) from Cellulomonas fimi consists of an N-terminal catalytic domain and a C-terminal cellulose-binding domain, joined by a glycosylated proline-threonine (PT) linker. To characterize the conformation and dynamics of the Cex linker and the consequences of its modification, we have used NMR spectroscopy to study full-length Cex in its nonglycosylated ( approximately 47 kDa) and glycosylated ( approximately 51 kDa) forms. The PT linker lacks any predominant structure in either form as indicated by random coil amide chemical shifts. Furthermore, heteronuclear (1)H-(15)N nuclear Overhauser effect relaxation measurements demonstrate that the linker is flexible on the ns-to-ps time scale and that glycosylation partially dampens this flexibility. The catalytic and cellulose-binding domains also exhibit identical amide chemical shifts whether in isolation or in the context of either unmodified or glycosylated full-length Cex. Therefore, there are no noncovalent interactions between the two domains of Cex or between either domain and the linker. This conclusion is supported by the distinct (15)N relaxation properties of the two domains, as well as their differential alignment within a magnetic field by Pf1 phage particles. These data demonstrate that the PT linker is a flexible tether, joining the structurally independent catalytic and cellulose-binding domains of Cex in an ensemble of conformations; however, more extended forms may predominate because of restrictions imparted by the alternating proline residues. This supports the postulate that the binding-domain anchors Cex to the surface of cellulose, whereas the linker provides flexibility for the catalytic domain to hydrolyze nearby hemicellulose (xylan) chains.