Stability of chitosan-a challenge for pharmaceutical and biomedical applications

The Influence of Chitosan Cross-linking on the Properties of Alginate Microparticles with Metformin Hydrochloride-In Vitro and In Vivo Evaluation

Sodium alginate is a polymer with unique ability to gel with different cross-linking agents in result of ionic and electrostatic interactions. Chitosan cross-linked alginate provides improvement of swelling and mucoadhesive properties and might be used to design sustained release dosage forms. Therefore, the aim of this research was to develop and evaluate possibility of preparing chitosan cross-linked alginate microparticles containing metformin hydrochloride by the spray-drying method. In addition, influence of cross-linking agent on the properties of microparticles was evaluated. Formulation of microparticles prepared by the spray drying of 2% alginate solution cross-linked by 0.1% chitosan was characterized by good mucoadhesive properties, high drug loading and prolonged metformin hydrochloride release. It was shown that designed microparticles reduced rat glucose blood level, delayed absorption of metformin hydrochloride and provided stable plasma drug concentration. Additionally, histopathological studies of pancreas, liver and kidneys indicated that all prepared microparticles improved degenerative changes in organs of diabetic rats. Moreover, no toxicity effect and no changes in rats behavior after oral administration of chitosan cross-linked alginate microparticles were noted.

Phase separation dynamics of polydisperse colloids: a mean-field lattice-gas theory

Strong theoretical evidence shows that dense colloidal mixtures phase-separate in two stages and the denser phase contains long-lived composition heterogeneities.

Morphology and adsorption properties of chitosan sulfate salt microspheres prepared by a microwave-assisted method

Chitosan sulfate salt microspheres were synthesized by a convenient microwave-assisted method and used as effective adsorbents for Cr(vi).

Chitosan promotes ROS-mediated apoptosis and S phase cell cycle arrest in triple-negative breast cancer cells: evidence for intercalative interaction with genomic DNA

Chitosan (CS) is a semi-synthetic bio-based polysaccharide with promising biological and antitumor properties.

Controlled acid catalyzed sol gel for the synthesis of highly active TiO2-chitosan nanocomposite and its corresponding photocatalytic activity

For the synthesis of a highly active TiO₂-chitosan nanocomposite, pH plays a crucial role towards controlling its morphology, size, crystallinity, thermal stability, and surface adsorption properties. The presence of chitosan (CS) biopolymer facilitates greater sustainability to the photoexcited electrons and holes on the catalysts' surface. The variation of synthesis pH from 2 to 5 resulted in different physico-chemical and photocatalytic properties, whereby a pH of 3 resulted in TiO₂-chitosan nanocomposite with the highest photocatalytic degradation (above 99 %) of methylene orange (MO) dye. This was attributed to the efficient surface absorption properties, high crystallinity, and the presence of reactive surfaces of -NH₂ and -OH groups, which enhances the adsorption-photodegradation effect. The larger surface oxygen vacancies coupled with reduced electron-hole recombination further enhanced the photocatalytic activity. It is undeniable that the pH during synthesis is critical towards the development of the properties of the TiO₂-chitosan nanocomposite for the enhancement of photocatalytic activity.

Preparation and characterization of chitosan microparticles for immunoaffinity extraction and determination of enrofloxacin

The use of chitosan microparticles as chromatographic support has received much attention. In this study, the effects of process parameters, namely, chitosan molecular weight, chitosan concentration, molar ratio of amino group to aldehyde group, volume ratio of water to oil phase and stirring speed on the size and size distribution of chitosan microparticles and their application for immunoaffinity extraction were extensively investigated. Size distribution analysis indicated that the average diameter of the microparticles was 124μm with Span value of 1.1. The obtained microparticles exhibited low non-specific adsorption and kept stable in the pH range 4.0-10.0. Immunoaffinity chromatography (IAC) column was prepared by coupling antibody against enrofloxacin (ENR) with chitosan microparticles. Further characterization indicated that the binding capacity of the column was 4392ng ENR/mL gel and the variation of ENR extraction efficiency among columns was less than 5.2%. When challenged with ENR-fortified bovine milk samples, recoveries of ENR by immunoaffinity extraction were found to be in the range of 85.9% to 101.9%, demonstrated the feasibility of the prepared IAC columns for sample clean-up in ENR residue determination.

Blow-spun chitosan/PEG/PLGA nanofibers as a novel tissue engineering scaffold with antibacterial properties

Blow spinning is continuing to gain attention in tissue engineering, as the resultant nanofibrous structures can be used to create a biomimetic environment. In this study, blow spinning was used to construct nanofiber scaffolds with up to 10 % chitosan and poly(DL-lactide-co-glycolide) in the absence or presence of poly(ethylene glycol). Scanning electron microscopy demonstrated that nanofibers were distributed randomly to form three-dimensional mats. With respect to chitosan concentration, the average fiber diameter did not differ statistically in either the absence or presence of poly(ethylene glycol). In poly(ethylene glycol)-formulations, the average fiber diameter ranged from (981.9 ± 611.3) nm to (1139.2 ± 814.2) nm. In vitro cellular metabolic activity and proliferation studies using keratinized rat squamous epithelial cells (RL-65) showed that cytocompatibility was not compromised with the addition of poly(ethylene glycol). The cell responses at lower (1 and 2.5 %) chitosan concentrations were not significantly different from the groups without chitosan or no scaffold when cultivated for 3, 6, or 9 days. However, >15 % reduction in cellular responses were observed at 10 % chitosan. In presence of poly(ethylene glycol), nearly a 1-log incremental reduction in the number of colony forming units of Streptococcus mutans occurred as the chitosan concentration increased from 0-1 to 2.5 %. Bacterial preparations tested with poly(ethylene glycol) and 5 or 10 % chitosan were not significantly different than the positive kill control. Taken together, the most favorable conditions for attaining cytocompatibility and maintaining antibacterial functionality existed in poly(ethylene glycol)/poly(DL-lactide-co-glycolide) blow-spun scaffolds with integrated 1 or 2.5 % chitosan.

A review on chitosan-cellulose blends and nanocellulose reinforced chitosan biocomposites: Properties and their applications

Chitin is one of the most abundant natural polymers in world and it is used for the production of chitosan by deacetylation. Chitosan is antibacterial in nature, non-toxic, and biodegradable thus it can be used for the production of biodegradable film which is a green alternative to commercially available synthetic counterparts. However, their poor mechanical and thermal properties restricted its wide spread applications. Chitosan is highly compatible with other biopolymers thus its blending with cellulose and/or incorporation of nanofiber isolated from cellulose namely cellulose nanofiber and cellulose nanowhiskers are generally useful. Cellulosic fibers in nano scale are attractive reinforcement in chitosan to produce environmental friendly composite films with improved physical properties. Thus chitosan based composites have wide applicability and potential in the field of biomedical, packaging and water treatment. This review summarises properties and preparation procedure of chitosan-cellulose blends and nano size cellulose reinforcement in chitosan bionanocomposites for different applications.

AVALIAÇÃO IN VITRO DA AÇÃO DA QUITOSANA E DE SEU DERIVADO QUATERNIZADO NA INIBIÇÃO DO CRESCIMENTO DO FUNGO PENICILLIUM EXPANSUM

Quitosana comercial de média massa molar (400.000 gmol-1) e seu derivado quaternizado hidrossolúvel N,N,N-trimetilquitosana foram avaliados em condições laboratoriais, em análises in vitro, como agentes inibidores do crescimento de Penicillium expansum. Formulações nas concentrações de 0,1; 1,0; 5,0 e 10,0 gL-1 de cada polímero foram preparadas e adicionados em meio de cultura BDA sólido e aquoso. O fungo foi isolado de frutas contaminadas, cultivado e inoculado nos meios contendo os polímeros. Análises conduzidas por medida do crescimento de colônias em meio sólido e por contagem de esporos germinados em meio liquido (em câmara de Neubauer) indicaram eficiência na redução da infestação por ambos os polímeros, porém em condições distintas. A quitosana apresentou elevada eficiência em meio líquido enquanto seu derivado foi eficaz na redução do crescimento em meio de cultura sólido, ambos em baixas concentrações (0,1 e 1,0 gL-1). Os resultados são discutidos com base nos mecanismos aceitos de ação antimicrobiana da quitosana, objetivando potenciais aplicações tópicas em frutos na condição pós-colheita.