A fast and accurate computational method for the linear-combination-based isotropic periodic sum

An isotropic periodic sum (IPS) is a powerful technique to reasonably calculate intermolecular interactions for wide range of molecular systems under periodic boundary conditions. A linear-combination-based IPS (LIPS) has been developed to attain computational accuracy close to an exact lattice sum, such as the Ewald sum. The algorithm of the original LIPS method has a high computational cost because it needs long-range interaction calculations in real space. This becomes a performance bottleneck for long-time molecular simulations. In this work, the combination of an LIPS and fast Fourier transform (FFT) was developed, and evaluated on homogeneous and heterogeneous molecular systems. This combinational approach of LIPS/FFT attained computational efficiency close to that of a smooth particle mesh Ewald while maintaining the same high accuracy as the original LIPS. We concluded that LIPS/FFT has great potential to extend the capability of IPS techniques for the fast and accurate computation of many types of molecular systems.

The "Hot-Solvent/Cold-Solute" Problem Revisited

The temperature steers the equilibrium and nonequilibrium conformational dynamics of macromolecules in solution. Therefore, corresponding molecular dynamics simulations require a strategy for temperature control which should guarantee that the experimental statistical ensemble is also sampled in silico. Several algorithms for temperature control have been proposed. All these thermostats interfere with the macromolecule's "natural" dynamics as given by the Newtonian mechanics. Furthermore, using a single thermostat for an inhomogeneous solute-solvent system can lead to stationary temperature gradients. To avoid this "hot solvent/cold solute" problem, two separate thermostats are frequently applied, one to the solute and one to the solvent. However, such a separate temperature control will perturb the dynamics of the macromolecule much more strongly than a global one and, therefore, can introduce large artifacts into its conformational dynamics. Based on the concept that an explicit solvent environment represents an ideal thermostat concerning the magnitude and time correlation of temperature fluctuations of the solute, we propose a temperature control strategy that, on the one hand, provides a homogeneous temperature distribution throughout the system together with the correct statistical ensemble for the solute molecule while, on the other hand, minimally perturbing its dynamics.

Simulated Solute Tempering

For the enhanced conformational sampling in molecular dynamics (MD) simulations, we present "simulated solute tempering" (SST) which is an easy to implement variant of simulated tempering. SST extends conventional simulated tempering (CST) by key concepts of "replica exchange with solute tempering" (REST, Liu et al. Proc. Natl. Acad. Sci. U.S.A. 2005, 102, 13749). We have applied SST, CST, and REST to molecular dynamics (MD) simulations of an alanine octapeptide in explicit water. The weight parameters required for CST and SST are determined by two different formulas whose performance is compared. For SST only one of them yields a uniform sampling of the temperature space. Compared to CST and REST, SST provides the highest exchange probabilities between neighboring rungs in the temperature ladder. Concomitantly, SST leads to the fastest diffusion of the simulation system through the temperature space, in particular, if the "even-odd" exchange scheme is employed in SST. As a result, SST exhibits the highest sampling speed of the investigated tempering methods.

Linearly scaling and almost Hamiltonian dielectric continuum molecular dynamics simulations through fast multipole expansions

Hamiltonian Dielectric Solvent (HADES) is a recent method [S. Bauer et al., J. Chem. Phys. 140, 104103 (2014)] which enables atomistic Hamiltonian molecular dynamics (MD) simulations of peptides and proteins in dielectric solvent continua. Such simulations become rapidly impractical for large proteins, because the computational effort of HADES scales quadratically with the number N of atoms. If one tries to achieve linear scaling by applying a fast multipole method (FMM) to the computation of the HADES electrostatics, the Hamiltonian character (conservation of total energy, linear, and angular momenta) may get lost. Here, we show that the Hamiltonian character of HADES can be almost completely preserved, if the structure-adapted fast multipole method (SAMM) as recently redesigned by Lorenzen et al. [J. Chem. Theory Comput. 10, 3244-3259 (2014)] is suitably extended and is chosen as the FMM module. By this extension, the HADES/SAMM forces become exact gradients of the HADES/SAMM energy. Their translational and rotational invariance then guarantees (within the limits of numerical accuracy) the exact conservation of the linear and angular momenta. Also, the total energy is essentially conserved-up to residual algorithmic noise, which is caused by the periodically repeated SAMM interaction list updates. These updates entail very small temporal discontinuities of the force description, because the employed SAMM approximations represent deliberately balanced compromises between accuracy and efficiency. The energy-gradient corrected version of SAMM can also be applied, of course, to MD simulations of all-atom solvent-solute systems enclosed by periodic boundary conditions. However, as we demonstrate in passing, this choice does not offer any serious advantages.

Electrostatics of proteins in dielectric solvent continua. II. Hamiltonian reaction field dynamics

In Paper I of this work [S. Bauer, G. Mathias, and P. Tavan, J. Chem. Phys. 140, 104102 (2014)] we have presented a reaction field (RF) method, which accurately solves the Poisson equation for proteins embedded in dielectric solvent continua at a computational effort comparable to that of polarizable molecular mechanics (MM) force fields. Building upon these results, here we suggest a method for linearly scaling Hamiltonian RF/MM molecular dynamics (MD) simulations, which we call "Hamiltonian dielectric solvent" (HADES). First, we derive analytical expressions for the RF forces acting on the solute atoms. These forces properly account for all those conditions, which have to be self-consistently fulfilled by RF quantities introduced in Paper I. Next we provide details on the implementation, i.e., we show how our RF approach is combined with a fast multipole method and how the self-consistency iterations are accelerated by the use of the so-called direct inversion in the iterative subspace. Finally we demonstrate that the method and its implementation enable Hamiltonian, i.e., energy and momentum conserving HADES-MD, and compare in a sample application on Ac-Ala-NHMe the HADES-MD free energy landscape at 300 K with that obtained in Paper I by scanning of configurations and with one obtained from an explicit solvent simulation.

Design of a reaction field using a linear-combination-based isotropic periodic sum method

In our previous study (Takahashi et al., J. Chem. Theory Comput. 2012, 8, 4503), we developed the linear-combination-based isotropic periodic sum (LIPS) method. The LIPS method is based on the extended isotropic periodic sum theory that produces a ubiquitous interaction potential function to estimate homogeneous and heterogeneous systems. The LIPS theory also provides the procedure to design a periodic reaction field. To demonstrate this, in the present work, a novel reaction field of the LIPS method was developed. The novel reaction field was labeled LIPS-SW, because it provides an interaction potential function with a shape that resembles that of the switch function method. To evaluate the ability of the LIPS-SW method to describe in homogeneous and heterogeneous systems, we carried out molecular dynamics (MD) simulations of bulk water and water-vapor interfacial systems using the LIPS-SW method. The results of these simulations show that the LIPS-SW method gives higher accuracy than the conventional interaction potential function of the LIPS method. The accuracy of simulating water-vapor interfacial systems was greatly improved, while that of bulk water systems was maintained using the LIPS-SW method. We conclude that the LIPS-SW method shows great potential for high-accuracy, high-performance computing to allow large scale MD simulations. © 2014 Wiley Periodicals, Inc.

Coupling density functional theory to polarizable force fields for efficient and accurate Hamiltonian molecular dynamics simulations

Hybrid molecular dynamics (MD) simulations, in which the forces acting on the atoms are calculated by grid-based density functional theory (DFT) for a solute molecule and by a polarizable molecular mechanics (PMM) force field for a large solvent environment composed of several 10(3)-10(5) molecules, pose a challenge. A corresponding computational approach should guarantee energy conservation, exclude artificial distortions of the electron density at the interface between the DFT and PMM fragments, and should treat the long-range electrostatic interactions within the hybrid simulation system in a linearly scaling fashion. Here we describe a corresponding Hamiltonian DFT/(P)MM implementation, which accounts for inducible atomic dipoles of a PMM environment in a joint DFT/PMM self-consistency iteration. The long-range parts of the electrostatics are treated by hierarchically nested fast multipole expansions up to a maximum distance dictated by the minimum image convention of toroidal boundary conditions and, beyond that distance, by a reaction field approach such that the computation scales linearly with the number of PMM atoms. Short-range over-polarization artifacts are excluded by using Gaussian inducible dipoles throughout the system and Gaussian partial charges in the PMM region close to the DFT fragment. The Hamiltonian character, the stability, and efficiency of the implementation are investigated by hybrid DFT/PMM-MD simulations treating one molecule of the water dimer and of bulk water by DFT and the respective remainder by PMM.

Polarizable six-point water models from computational and empirical optimization

Tröster et al. (J. Phys. Chem B 2013, 117, 9486-9500) recently suggested a mixed computational and empirical approach to the optimization of polarizable molecular mechanics (PMM) water models. In the empirical part the parameters of Buckingham potentials are optimized by PMM molecular dynamics (MD) simulations. The computational part applies hybrid calculations, which combine the quantum mechanical description of a H2O molecule by density functional theory (DFT) with a PMM model of its liquid phase environment generated by MD. While the static dipole moments and polarizabilities of the PMM water models are fixed at the experimental gas phase values, the DFT/PMM calculations are employed to optimize the remaining electrostatic properties. These properties cover the width of a Gaussian inducible dipole positioned at the oxygen and the locations of massless negative charge points within the molecule (the positive charges are attached to the hydrogens). The authors considered the cases of one and two negative charges rendering the PMM four- and five-point models TL4P and TL5P. Here we extend their approach to three negative charges, thus suggesting the PMM six-point model TL6P. As compared to the predecessors and to other PMM models, which also exhibit partial charges at fixed positions, TL6P turned out to predict all studied properties of liquid water at p0 = 1 bar and T0 = 300 K with a remarkable accuracy. These properties cover, for instance, the diffusion constant, viscosity, isobaric heat capacity, isothermal compressibility, dielectric constant, density, and the isobaric thermal expansion coefficient. This success concurrently provides a microscopic physical explanation of corresponding shortcomings of previous models. It uniquely assigns the failures of previous models to substantial inaccuracies in the description of the higher electrostatic multipole moments of liquid phase water molecules. Resulting favorable properties concerning the transferability to other temperatures and conditions like the melting of ice are also discussed.

Polarizable water models from mixed computational and empirical optimization

Here we suggest a mixed computational and empirical approach serving to optimize the parameters of complex and polarizable molecular mechanics (PMM) models for complicated liquids. The computational part of the parameter optimization relies on hybrid calculations combining density functional theory (DFT) for a solute molecule with a PMM treatment of its solvent environment at well-defined thermodynamic conditions. As an application we have developed PMM models for water featuring ν = 3, 4, and 5 points of force action, a Gaussian inducible dipole and a Buckingham potential at the oxygen, the experimental liquid phase geometry, the experimental gas phase polarizability α(exp)(g) = 1.47 ų, and, for ν = 4 and 5, the gas phase value μ(exp)(g) = 1.855 D for the static dipole moment. The widths of the Gaussian dipoles and, for ν = 4 and 5, also the electrostatic geometries of these so-called TLνP models are derived from self-consistent DFT/PMM calculations, and the parameters of the Buckingham potentials (and the static TL3P dipole moment) are estimated from molecular dynamics (MD) simulations. The high quality of the resulting models is demonstrated for the observables targeted during optimization (potential energy per molecule, pressure, radial distribution functions) and a series of predicted properties (quadrupole moments, density at constant pressure, dielectric constant, diffusivity, viscosity, compressibility, heat capacity) at certain standard conditions. Remaining deficiencies and possible ways for their removal are discussed.

Optimizing the Accuracy and Efficiency of Fast Hierarchical Multipole Expansions for MD Simulations

Based on p'th order Cartesian Taylor expansions of Coulomb interactions and on hierarchical decompositions of macromolecular simulation systems into hierarchies of nested, structure-adapted, and adaptively formed clusters of increasing size, fast multipole methods are constructed for rapid and accurate calculations of electrostatic interactions. These so-called SAMMp algorithms are formulated through totally symmetric and traceless tensors describing the multipole moments and the coefficients of local Taylor expansions. Simple recursions for the efficient evaluation and shifting of multipole moments are given. The required tensors are explicitly given up to order p = 4. The SAMMp algorithms are shown to guarantee the reaction principle. For systems with periodic boundaries, a reaction field (RF) correction is applied, which introduces at distances beyond the "minimum image convention" boundary a dielectric continuum surrounding each cluster at the top level of coarse graining. The correctness of the present SAMMp implementation is demonstrated by analyzing the scaling of the residuals and by checking the numerical accuracy of the reaction principle for a pair of distant molecular ions in vacuum. Molecular dynamics simulations of pure water and aqueous solutions containing artificial ions, which are enclosed by periodic boundaries, demonstrate the stability and low-noise behavior of SAMMp/RF.

DFT/MM description of flavin IR spectra in BLUF domains

A class of photoreceptors occurring in various organisms consists of domains that are blue light sensing using flavin (BLUF). The vibrational spectra of the flavin chromophore are spectroscopically well characterized for the dark-adapted resting states and for the light-adapted signaling states of BLUF domains in solution. Here we present a theoretical analysis of such spectra by applying density functional theory (DFT) to the flavin embedded in molecular mechanics (MM) models of its protein and solvent environment. By DFT/MM we calculate flavin spectra for seven different X-ray and NMR structures of BLUF domains occurring in the transcriptional antirepressor AppA and in the blue light receptor B (BlrB) of the purple bacterium Rb. Sphaeroides as well as in the phototaxis photoreceptor Slr1694 of the cyanobacterium Synechocystis. By considering the dynamical stabilities of associated all-atom simulation models and by comparing calculated with observed vibrational spectra, we show that two of the considered structures (both AppA) are obviously erroneous and that specific features of two further crystal structures (BlrB and Slr1694) cannot represent the states of the respective BLUF domains in solution. Thereby, the conformational transitions elicited by solvation are identified. In this context we demonstrate how hydrogen bonds of varying strengths can tune in BLUF domains the C═O stretching frequencies of the flavin chromophore. Furthermore we show that the DFT/MM spectra of the flavin calculated for two different AppA BLUF conformations, which are called Trp(in) and Met(in), fit very well to the spectroscopic data observed for the dark and light states, respectively, if (i) polarized MM force fields, which are calculated by an iterative DFT/MM procedure, are employed for the flavin binding pockets and (ii) the calculated frequencies are properly scaled. Although the associated analysis indicates that the Trp(in) conformation belongs to the dark state, no clear light vs dark distinction emerges for the Met(in) conformation. In this connection, a number of methodological issues relevant for such complex computations are thoroughly discussed showing, in particular, why our current descriptions could not decide the light vs dark question for Met(in).

Highly polar environments catalyze the unfolding of PrP C helix 1

The first alpha-helix (H1) likely plays an important role in the conversion of the cellular prion protein (PrP(C)) into its pathogenic isoform (PrP(Sc)). In this conversion, H1 may either have to unfold or may represent a site of intermolecular contact. A recent molecular dynamics simulation suggested that H1 can unfold if it is detached from the protein core (Hirschberger et al. in Biophys J 90:3908, 2006). It has been hypothesized that the high dielectric constant epsilon (S) of the bulk water environment facilitates the unfolding of H1. To check this hypothesis, we performed a number of replica exchange molecular dynamics simulations of an H1 peptide in solvents of different epsilon (S). We found that the equilibrium helix fraction in water is less than 40%, in agreement with previous experimental findings, and that the helix unfolds much faster in water than in less polar solvents. The kinetically stabilizing effect of the organic solvents is largely unspecific and correlates well with their dielectric constant epsilon (S).

Molecular dynamics simulations of a reversibly folding beta-heptapeptide in methanol: influence of the treatment of long-range electrostatic interactions

Eight 100-ns molecular dynamics simulations of a beta-heptapeptide in methanol at 340 K (within cubic periodic computational boxes of about 6-nm edge) are reported and compared. These simulations were performed with three different charge-state combinations at the peptide termini, one of them with or without a neutralizing chloride counterion, and using either the lattice-sum (LS) or reaction-field (RF) scheme to handle electrostatic interactions. The choice of the electrostatic scheme has essentially no influence on the folding-unfolding equilibrium when the peptide termini are uncharged and only a small influence when the peptide is positively charged at its N-terminus (with or without inclusion of a neutralizing chloride counterion). However, when the peptide is zwitterionic, the LS scheme leads to preferential sampling of the high-dipole folded helical state, whereas the RF scheme leads to preferential sampling of a low-dipole unfolded salt-bridged state. A continuum electrostatics analysis based on the sampled configurations (zwitterionic case) suggests that the LS scheme stabilizes the helical state through artificial periodicity, but that the magnitude of this perturbation is essentially negligible (compared to the thermal energy) for the large box size and relatively polar solvent considered. The results thus provide clear evidence (continuum electrostatics analysis) for the absence of LS artifacts and some indications (still not definitive because of the limited sampling of the folding-unfolding transition) for the presence of RF artifacts in this specific system.

CHARMM: the biomolecular simulation program

CHARMM (Chemistry at HARvard Molecular Mechanics) is a highly versatile and widely used molecular simulation program. It has been developed over the last three decades with a primary focus on molecules of biological interest, including proteins, peptides, lipids, nucleic acids, carbohydrates, and small molecule ligands, as they occur in solution, crystals, and membrane environments. For the study of such systems, the program provides a large suite of computational tools that include numerous conformational and path sampling methods, free energy estimators, molecular minimization, dynamics, and analysis techniques, and model-building capabilities. The CHARMM program is applicable to problems involving a much broader class of many-particle systems. Calculations with CHARMM can be performed using a number of different energy functions and models, from mixed quantum mechanical-molecular mechanical force fields, to all-atom classical potential energy functions with explicit solvent and various boundary conditions, to implicit solvent and membrane models. The program has been ported to numerous platforms in both serial and parallel architectures. This article provides an overview of the program as it exists today with an emphasis on developments since the publication of the original CHARMM article in 1983.

Light-triggered beta-hairpin folding and unfolding

A light-switchable peptide is transformed with ultrashort pulses from a beta-hairpin to an unfolded hydrophobic cluster and vice versa. The structural changes are monitored by mid-IR probing. Instantaneous normal mode analysis with a Hamiltonian combining density functional theory with molecular mechanics is used to interpret the absorption transients. Illumination of the beta-hairpin state triggers an unfolding reaction that visits several intermediates and reaches the unfolded state within a few nanoseconds. In this unfolding reaction to the equilibrium hydrophobic cluster conformation, the system does not meet significant barriers on the free-energy surface. The reverse folding process takes much longer because it occurs on the time scale of 30 micros. The folded state has a defined structure, and its formation requires an extended search for the correct hydrogen-bond pattern of the beta-strand.

Collective Langevin dynamics of conformational motions in proteins

Functionally relevant slow conformational motions of proteins are, at present, in most cases inaccessible to molecular dynamics (MD) simulations. The main reason is that the major part of the computational effort is spend for the accurate description of a huge number of high frequency motions of the protein and the surrounding solvent. The accumulated influence of these fluctuations is crucial for a correct treatment of the conformational dynamics; however, their details can be considered irrelevant for most purposes. To accurately describe long time protein dynamics we here propose a reduced dimension approach, collective Langevin dynamics (CLD), which evolves the dynamics of the system within a small subspace of relevant collective degrees of freedom. The dynamics within the low-dimensional conformational subspace is evolved via a generalized Langevin equation which accounts for memory effects via memory kernels also extracted from short explicit MD simulations. To determine the memory kernel with differing levels of regularization, we propose and evaluate two methods. As a first test, CLD is applied to describe the conformational motion of the peptide neurotensin. A drastic dimension reduction is achieved by considering one single curved conformational coordinate. CLD yielded accurate thermodynamical and dynamical behaviors. In particular, the rate of transitions between two conformational states agreed well with a rate obtained from a 150 ns reference molecular dynamics simulation, despite the fact that the time scale of the transition (approximately 50 ns) was much longer than the 1 ns molecular dynamics simulation from which the memory kernel was extracted.

A multiple time step algorithm compatible with a large number of distance classes and an arbitrary distance dependence of the time step size for the fast evaluation of nonbonded interactions in molecular simulations

A new algorithm is introduced to perform the multiple time step integration of the equations of motion for a molecular system, based on the splitting of the nonbonded interactions into a series of distance classes. The interactions between particle pairs in successive classes are updated at a progressively decreasing frequency. Unlike previous multiple time-stepping schemes relying on distance classes, the present algorithm sorts interacting particle pairs by their next update times rather than by their update frequencies. For this reason, the proposed scheme is extremely flexible with respect to the number of classes that can be employed (up to hundred or more) and the distance dependence of the relative time step size (arbitrary integer function of the distance). It can also easily be adapted to classes defined based on a criterion other than the interparticle distance (e.g., interaction magnitude). Different variants of the algorithm are tested in terms of accuracy and efficiency for simulations of a pure water system (6167 molecules) under truncated-octahedral periodic boundary conditions, and compared to the twin-range method standardly used with GROMOS96 (short- and long-range cutoff distances of 0.8 and 1.4 nm, pair list and intermediate-range interactions updated every five steps). In particular, multiple time-stepping schemes with an accuracy comparable to that of the twin-range method can be designed, that permit to increase the effective (long-range) cutoff distance from 1.4 to 3.0 nm with a performance loss of only about a factor 2. This result is quite encouraging, considering the benefits of doubling the cutoff radius in the context of (bio-)molecular simulations.

Electrostatics of proteins in dielectric solvent continua. II. First applications in molecular dynamics simulations

In the preceding paper by Stork and Tavan, [J. Chem. Phys. 126, 165105 (2007)], the authors have reformulated an electrostatic theory which treats proteins surrounded by dielectric solvent continua and approximately solves the associated Poisson equation [B. Egwolf and P. Tavan, J. Chem. Phys. 118, 2039 (2003)]. The resulting solution comprises analytical expressions for the electrostatic reaction field (RF) and potential, which are generated within the protein by the polarization of the surrounding continuum. Here the field and potential are represented in terms of Gaussian RF dipole densities localized at the protein atoms. Quite like in a polarizable force field, also the RF dipole at a given protein atom is induced by the partial charges and RF dipoles at the other atoms. Based on the reformulated theory, the authors have suggested expressions for the RF forces, which obey Newton's third law. Previous continuum approaches, which were also built on solutions of the Poisson equation, used to violate the reactio principle required by this law, and thus were inapplicable to molecular dynamics (MD) simulations. In this paper, the authors suggest a set of techniques by which one can surmount the few remaining hurdles still hampering the application of the theory to MD simulations of soluble proteins and peptides. These techniques comprise the treatment of the RF dipoles within an extended Lagrangian approach and the optimization of the atomic RF polarizabilities. Using the well-studied conformational dynamics of alanine dipeptide as the simplest example, the authors demonstrate the remarkable accuracy and efficiency of the resulting RF-MD approach.

High performance computing in biology: multimillion atom simulations of nanoscale systems

Computational methods have been used in biology for sequence analysis (bioinformatics), all-atom simulation (molecular dynamics and quantum calculations), and more recently for modeling biological networks (systems biology). Of these three techniques, all-atom simulation is currently the most computationally demanding, in terms of compute load, communication speed, and memory load. Breakthroughs in electrostatic force calculation and dynamic load balancing have enabled molecular dynamics simulations of large biomolecular complexes. Here, we report simulation results for the ribosome, using approximately 2.64 million atoms, the largest all-atom biomolecular simulation published to date. Several other nano-scale systems with different numbers of atoms were studied to measure the performance of the NAMD molecular dynamics simulation program on the Los Alamos National Laboratory Q Machine. We demonstrate that multimillion atom systems represent a 'sweet spot' for the NAMD code on large supercomputers. NAMD displays an unprecedented 85% parallel scaling efficiency for the ribosome system on 1024 CPUs. We also review recent targeted molecular dynamics simulations of the ribosome that prove useful for studying conformational changes of this large biomolecular complex in atomic detail.

Structural instability of the prion protein upon M205S/R mutations revealed by molecular dynamics simulations

The point mutations M205S and M205R have been demonstrated to severely disturb the folding and maturation process of the cellular prion protein (PrP(C)). These disturbances have been interpreted as consequences of mutation-induced structural changes in PrP, which are suggested to involve helix 1 and its attachment to helix 3, because the mutated residue M205 of helix 3 is located at the interface of these two helices. Furthermore, current models of the prion protein scrapie (PrP(Sc)), which is the pathogenic isoform of PrP(C) in prion diseases, imply that helix 1 disappears during refolding of PrP(C) into PrP(Sc). Based on molecular-dynamics simulations of wild-type and mutant PrP(C) in aqueous solution, we show here that the native PrP(C) structure becomes strongly distorted within a few nanoseconds, once the point mutations M205S and M205R have been applied. In the case of M205R, this distortion is characterized by a motion of helix 1 away from the hydrophobic core into the aqueous environment and a subsequent structural decay. Together with experimental evidence on model peptides, this decay suggests that the hydrophobic attachment of helix 1 to helix 3 at M205 is required for its correct folding into its stable native structure.

Multiple Loop Conformations of Peptides Predicted by Molecular Dynamics Simulations Are Compatible with Nuclear Magnetic Resonance†

The affinity and selectivity of protein-protein interactions can be fine-tuned by varying the size, flexibility, and amino acid composition of involved surface loops. As a model for such surface loops, we study the conformational landscape of an octapeptide, whose flexibility is chemically steered by a covalent ring closure integrating an azobenzene dye into and by a disulfide bridge additionally constraining the peptide backbone. Because the covalently integrated azobenzene dyes can be switched by light between a bent cis state and an elongated trans state, six cyclic peptide models of strongly different flexibilities are obtained. The conformational states of these peptide models are sampled by NMR and by unconstrained molecular dynamics (MD) simulations. Prototypical conformations and the free-energy landscapes in the high-dimensional space spanned by the phi/psi angles at the peptide backbone are obtained by clustering techniques from the MD trajectories. Multiple open-loop conformations are shown to be predicted by MD particularly in the very flexible cases and are shown to comply with the NMR data despite the fact that such open-loop conformations are missing in the refined NMR structures.

Enhanced sampling by multiple molecular dynamics trajectories: carbonmonoxy myoglobin 10 μs A0 → A1–3 transition from ten 400 picosecond simulations

The utility of multiple trajectories to extend the time scale of molecular dynamics simulations is reported for the spectroscopic A-states of carbonmonoxy myoglobin (MbCO). Experimentally, the A0-->A(1-3) transition has been observed to be 10 micros at 300 K, which is beyond the time scale of standard molecular dynamics simulations. To simulate this transition, 10 short (400 ps) and two longer time (1.2 ns) molecular dynamics trajectories, starting from five different crystallographic and solution phase structures with random initial velocities centered in a 37 A radius sphere of water, have been used to sample the native-fold of MbCO. Analysis of the ensemble of structures gathered over the cumulative 5.6 ns reveals two biomolecular motions involving the side chains of His64 and Arg45 to explain the spectroscopic states of MbCO. The 10 micros A0-->A(1-3) transition involves the motion of His64, where distance between His64 and CO is found to vary up to 8.8 +/- 1.0 A during the transition of His64 from the ligand (A(1-3)) to bulk solvent (A0). The His64 motion occurs within a single trajectory only once, however the multiple trajectories populate the spectroscopic A-states fully. Consequently, multiple independent molecular dynamics simulations have been found to extend biomolecular motion from 5 ns of total simulation to experimental phenomena on the microsecond time scale.

Temperature-dependent conformational transitions and hydrogen-bond dynamics of the elastin-like octapeptide GVG(VPGVG): a molecular-dynamics study

A joint experimental/theoretical investigation of the elastin-like octapeptide GVG(VPGVG) was carried out. In this article a comprehensive molecular-dynamics study of the temperature-dependent folding and unfolding of the octapeptide is presented. The current study, as well as its experimental counterpart (see companion article in this issue) find that this peptide undergoes an inverse temperature transition (ITT), leading to a folding at approximately 40-60 degrees C. In addition, an unfolding transition is identified at unusually high temperatures approaching the normal boiling point of water. Due to the small size of the system, two broad temperature regimes are found: the ITT regime at approximately 10-60 degrees C and the unfolding regime at approximately T > 60 degrees C, where the peptide has a maximum probability of being folded at T approximately 60 degrees C. A detailed molecular picture involving a thermodynamic order parameter, or reaction coordinate, for this process is presented along with a time-correlation function analysis of the hydrogen-bond dynamics within the peptide as well as between the peptide and solvating water molecules. Correlation with experimental evidence and ramifications on the properties of elastin are discussed.

Angular resolution and range of dipole–dipole correlations in water

We investigate the dipolar correlations in liquid water at angular resolution by molecular-dynamics simulations of a large periodic simulation system containing about 40,000 molecules. Because we are particularly interested in the long-range ordering, we use a simple three-point model for these molecules. The electrostatics is treated both by Ewald summation and by minimum image truncation combined with a reaction field approach. To gain insight into the angular dependence of the simulated dipolar ordering we introduce a suitable expansion of the molecular pair distribution function into a set of two-dimensional correlation functions. We show that these functions enable detailed insights into the shell structure of the dipolar ordering around a given water molecule. For these functions we derive analytical expressions in the particular case in which liquid water is conceived as a dielectric continuum. Comparisons of these continuum models with the correlation functions derived from the simulations yield the key result that liquid water behaves like a continuum dielectric beyond distances of about 15 angstroms from a given water molecule. We argue that this should be a generic property of water independent of our modeling. By comparison of the results of the two different electrostatics treatments with the continuum description we show that the boundary artifacts occurring in both methods are isotropically distributed and are locally small in the respective boundary regions.

Continuum description of ionic and dielectric shielding for molecular-dynamics simulations of proteins in solution

We extend our continuum description of solvent dielectrics in molecular-dynamics (MD) simulations, which has provided an efficient and accurate solution of the Poisson equation, to ionic solvents as described by the linearized Poisson-Boltzmann (LPB) equation. We start with the formulation of a general theory for the electrostatics of an arbitrarily shaped molecular system, which consists of partially charged atoms and is embedded in a LPB continuum. This theory represents the reaction field induced by the continuum in terms of charge and dipole densities localized within the molecular system. Because these densities cannot be calculated analytically for systems of arbitrary shape, we introduce an atom-based discretization and a set of carefully designed approximations. This allows us to represent the densities by charges and dipoles located at the atoms. Coupled systems of linear equations determine these multipoles and can be rapidly solved by iteration during a MD simulation. The multipoles yield the reaction field forces and energies. Finally, we scrutinize the quality of our approach by comparisons with an analytical solution restricted to perfectly spherical systems and with results of a finite difference method.

Vibrational spectra from atomic fluctuations in dynamics simulations. I. Theory, limitations, and a sample application

Hybrid molecular dynamics (MD) simulations, which combine density functional theory (DFT) descriptions of a molecule with a molecular mechanics (MM) modeling of its solvent environment, have opened the way towards accurate computations of solvation effects in the vibrational spectra of molecules. Recently, Wheeler et al. [ChemPhysChem 4, 382 (2002)] have suggested to compute these spectra from DFT/MM-MD trajectories by diagonalizing the covariance matrix of atomic fluctuations. This so-called principal mode analysis (PMA) allegedly can replace the well-established approaches, which are based on Fourier transform methods or on conventional normal mode analyses. By scrutinizing and revising the PMA approach we identify five conditions, which must be guaranteed if PMA is supposed to render exact vibrational frequencies. Besides specific choices of (a) coordinates and (b) coordinate systems, these conditions cover (c) a harmonic intramolecular potential, (d) a complete thermal equilibrium within the molecule, and (e) a molecular Hamiltonian independent of time. However, the PMA conditions [(c)-(d)] and [(c)-(e)] are generally violated in gas phase DFT-MD and liquid phase DFT/MM-MD trajectories, respectively. Based on a series of simple analytical model calculations and on the analysis of MD trajectories calculated for the formaldehyde molecule in the gas phase (DFT) and in liquid water (DFT/MM) we show that in both phases the violation of condition (d) can cause huge errors in PMA frequency computations, whereas the inevitable violations of conditions (c) and (e), the latter being generic to the liquid phase, imply systematic and sizable underestimates of the vibrational frequencies by PMA. We demonstrate that the huge errors, which are caused by an incomplete thermal equilibrium violating (d), can be avoided if one introduces mode-specific temperatures T(j) and calculates the frequencies from a "generalized virial" (GV) expression instead from PMA. Concerning ways to additionally remove the remaining errors, which GV still shares with PMA, we refer to Paper II of this work [M. Schmitz and P. Tavan, J. Chem. Phys. 121, 12247 (2004)].

Molecular dynamics simulations on SDF-1alpha: binding with CXCR4 receptor

Insights into the interacting mode of CXCR4 with SDF-1alpha are crucial in understanding the structural and functional characteristics of CXCR4 receptor. In this paper a computational pipeline, integrating protein structure prediction, molecular dynamics simulations, automated molecular docking, and Brownian dynamics simulations were employed to investigate the dynamic and energetic aspects of CXCR4 associating with SDF-1alpha. The entire simulation revealed the surface distribution feature of electrostatic potentials and conformational "open-close" process of the receptor. The possible binding conformation of CXCR4 was identified, and the CXCR4-SDF-1alpha binding complex was generated. Arg188-Glu277 salt bridge plays an important role for both the extracellular domain conformational change and SDF-1alpha binding. Two binding sites were mapped at the extracellular domain (Site 1) and inside the transmembrane domain (Site 2), which are composed of conserved residues. Sites 1 and 2 contribute approximately 60% and 40% to the binding affinity with SDF-1alpha, respectively. The binding model is in agreement with most of the experimental data. Transmembrane VI has more significant motion in the harmonious conformational transition of CXCR4 during SDF-1alpha binding, which may be possibly associated with signal transduction. Based on the modeling and simulation, a binding mechanism hypothesis between CXCR4 and SDF-1alpha and its relationship to the signal transduction has been proposed.

Ultrafast spectroscopy reveals subnanosecond peptide conformational dynamics and validates molecular dynamics simulation

Femtosecond time-resolved spectroscopy on model peptides with built-in light switches combined with computer simulation of light-triggered motions offers an attractive integrated approach toward the understanding of peptide conformational dynamics. It was applied to monitor the light-induced relaxation dynamics occurring on subnanosecond time scales in a peptide that was backbone-cyclized with an azobenzene derivative as optical switch and spectroscopic probe. The femtosecond spectra permit the clear distinguishing and characterization of the subpicosecond photoisomerization of the chromophore, the subsequent dissipation of vibrational energy, and the subnanosecond conformational relaxation of the peptide. The photochemical cis/trans-isomerization of the chromophore and the resulting peptide relaxations have been simulated with molecular dynamics calculations. The calculated reaction kinetics, as monitored by the energy content of the peptide, were found to match the spectroscopic data. Thus we verify that all-atom molecular dynamics simulations can quantitatively describe the subnanosecond conformational dynamics of peptides, strengthening confidence in corresponding predictions for longer time scales.