Ultrastructure of adult human articular cartilage matrix after cryotechnical processing

Multimodal 2D and 3D microscopic mapping of growth cartilage by computational imaging techniques - a short review including new research

Being able to image the microstructure of growth cartilage is important for understanding the onset and progression of diseases such as osteochondrosis and osteoarthritis, as well as for developing new treatments and implants. Studies of cartilage using conventional optical brightfield microscopy rely heavily on histological staining, where the added chemicals provide tissue-specific colours. Other microscopy contrast mechanisms include polarization, phase- and scattering contrast, enabling non-stained or 'label-free' imaging that significantly simplifies the sample preparation, thereby also reducing the risk of artefacts. Traditional high-performance microscopes tend to be both bulky and expensive.Computational imagingdenotes a range of techniques where computers with dedicated algorithms are used as an integral part of the image formation process. Computational imaging offers many advantages like 3D measurements, aberration correction and quantitative phase contrast, often combined with comparably cheap and compact hardware. X-ray microscopy is also progressing rapidly, in certain ways trailing the development of optical microscopy. In this study, we first briefly review the structures of growth cartilage and relevant microscopy characterization techniques, with an emphasis on Fourier ptychographic microscopy (FPM) and advanced x-ray microscopies. We next demonstrate with our own results computational imaging through FPM and compare the images with hematoxylin eosin and saffron (HES)-stained histology. Zernike phase contrast, and the nonlinear optical microscopy techniques of second harmonic generation (SHG) and two-photon excitation fluorescence (TPEF) are explored. Furthermore, X-ray attenuation-, phase- and diffraction-contrast computed tomography (CT) images of the very same sample are presented for comparisons. Future perspectives on the links to artificial intelligence, dynamic studies andin vivopossibilities conclude the article.

Depth-Dependent Strain Model (1D) for Anisotropic Fibrils in Articular Cartilage

The mechanical response of articular cartilage (AC) under compression is anisotropic and depth-dependent. AC is osmotically active, and its intrinsic osmotic swelling pressure is balanced by its collagen fibril network. This mechanism requires the collagen fibers to be under a state of tensile pre-strain. A simple mathematical model is used to explain the depth-dependent strain calculations observed in articular cartilage under 1D axial compression (perpendicular to the articular surface). The collagen fibers are under pre-strain, influenced by proteoglycan concentration (fixed charged density, FCD) and collagen stiffness against swelling stress. The stiffness is introduced in our model as an anisotropic modulus that varies with fibril orientation through tissue depth. The collagen fibers are stiffer to stretching parallel to their length than perpendicular to it; when combined with depth-varying FCD, the model successfully predicts how tissue strains decrease with depth during compression. In summary, this model highlights that the mechanical properties of cartilage depend not only on proteoglycan concentration but also on the intrinsic properties of the pre-strained collagen network. These properties are essential for the proper functioning of articular cartilage.

Cartilage biomechanics: From the basic facts to the challenges of tissue engineering

Articular cartilage (AC) is the thin tissue that covers the long bone ends in the joints and that ensures the transmission of forces between adjacent bones while allowing nearly frictionless movements between them. AC repair is a technologic and scientific challenge that has been addressed with numerous approaches. A major deadlock is the capacity to take in account its complex mechanical properties in repair strategies. In this review, we first describe the major mechanical behaviors of AC for the non-specialists. Then, we show how researchers have progressively identified specific mechanical parameters using mathematical models. There are still gaps in our understanding of some of the observations concerning AC biomechanical properties, particularly the differences in extracellular matrix stiffness measured at the microscale and at the millimetric scale. Nevertheless, for bioengineering applications, AC repair strategies must take into account what are commonly considered the main mechanical features of cartilage: its ability to withstand high stresses through three main behaviors (elasticity, poroelasticity and swelling). Finally, we emphasize that future studies need to investigate AC mechanical properties at different scales, particularly the gradient of mechanical properties around cells and across the cartilage depth, and the differences in mechanical properties at different scales. This multi-scale approach could greatly enhance the success of AC restorative approaches.

The articular cartilage surface is impaired by a loss of thick collagen fibers and formation of type I collagen in early osteoarthritis

Osteoarthritis (OA) is a joint disease affecting millions of patients worldwide. During OA onset and progression, the articular cartilage is destroyed, but the underlying complex mechanisms remain unclear. Here, we uncover changes in the thickness of collagen fibers and their composition at the onset of OA. For articular cartilage explants from knee joints of OA patients, we find that type I collagen-rich fibrocartilage-like tissue was formed in macroscopically intact cartilage, distant from OA lesions. Importantly, the number of thick fibers (>100 nm) has decreased early in the disease, followed by complete absence of thick fibers in advanced OA. We have obtained these results by a combination of high-resolution atomic force microscopy imaging under near-native conditions, immunofluorescence, scanning electron microscopy and a fluorescence-based classification of the superficial chondrocyte spatial organization. Taken together, our data suggests that the loss of tissue functionality in early OA cartilage is caused by a reduction of thick type II collagen fibers, likely due to the formation of type I collagen-rich fibrocartilage, followed by the development of focal defects in later OA stages. We anticipate that such an integrative characterization will be very beneficial for an in-depth understanding of other native biological tissues and the development of sustainable biomaterials. STATEMENT OF SIGNIFICANCE: In early osteoarthritis (OA) the cartilage appears macroscopically intact. However, this study demonstrates that the collagen network already changes in early OA by collagen fiber thinning and the formation of fibrocartilage-like tissue. Both nanoscopic deficiencies already occur in macroscopically intact regions of the human knee joint and are likely connected to processes that result in a weakened extracellular matrix. This study enhances the understanding of earliest progressive cartilage degeneration in the absence of external damage. The results suggest a determination of the mean collagen fiber thickness as a new target for the detection of early OA and a regulation of type I collagen synthesis as a new path for OA treatment.

Mechanical Cues: Bidirectional Reciprocity in the Extracellular Matrix Drives Mechano-Signalling in Articular Cartilage

The composition and organisation of the extracellular matrix (ECM), particularly the pericellular matrix (PCM), in articular cartilage is critical to its biomechanical functionality; the presence of proteoglycans such as aggrecan, entrapped within a type II collagen fibrillar network, confers mechanical resilience underweight-bearing. Furthermore, components of the PCM including type VI collagen, perlecan, small leucine-rich proteoglycans—decorin and biglycan—and fibronectin facilitate the transduction of both biomechanical and biochemical signals to the residing chondrocytes, thereby regulating the process of mechanotransduction in cartilage. In this review, we summarise the literature reporting on the bidirectional reciprocity of the ECM in chondrocyte mechano-signalling and articular cartilage homeostasis. Specifically, we discuss studies that have characterised the response of articular cartilage to mechanical perturbations in the local tissue environment and how the magnitude or type of loading applied elicits cellular behaviours to effect change. In vivo, including transgenic approaches, and in vitro studies have illustrated how physiological loading maintains a homeostatic balance of anabolic and catabolic activities, involving the direct engagement of many PCM molecules in orchestrating this slow but consistent turnover of the cartilage matrix. Furthermore, we document studies characterising how abnormal, non-physiological loading including excessive loading or joint trauma negatively impacts matrix molecule biosynthesis and/or organisation, affecting PCM mechanical properties and reducing the tissue’s ability to withstand load. We present compelling evidence showing that reciprocal engagement of the cells with this altered ECM environment can thus impact tissue homeostasis and, if sustained, can result in cartilage degradation and onset of osteoarthritis pathology. Enhanced dysregulation of PCM/ECM turnover is partially driven by mechanically mediated proteolytic degradation of cartilage ECM components. This generates bioactive breakdown fragments such as fibronectin, biglycan and lumican fragments, which can subsequently activate or inhibit additional signalling pathways including those involved in inflammation. Finally, we discuss how bidirectionality within the ECM is critically important in enabling the chondrocytes to synthesise and release PCM/ECM molecules, growth factors, pro-inflammatory cytokines and proteolytic enzymes, under a specified load, to influence PCM/ECM composition and mechanical properties in cartilage health and disease.

The effect of highly inhomogeneous biphasic properties on mechanical behaviour of articular cartilage

BACKGROUND AND OBJECTIVE

Investigating the biomechanics of cartilage could help to understand the unique load-bearing property of the cartilage and optimize the scaffold design in tissue-engineering. It is important to model the cartilage as a highly inhomogeneous fibril-reinforced biphasic material to represent its complex composition and structure. The depth-dependent and strain-dependent properties of the cartilage would also play an important role in its mechanical behaviour. However, the differences in representing the cartilage as a highly inhomogeneous model or as simplified models still remain unclear. Hence, in this study, a highly inhomogeneous fibril-reinforced biphasic cartilage model considering both the depth-dependent and strain-dependent properties was constructed; the effect of highly inhomogeneous properties on the mechanical behaviour of articular cartilage was investigated.

METHODS

A finite element model of the cartilage was developed based on a flat-ended indentation test. Compressive forces were applied to four various inhomogeneous layered models through a porous indenter (Model 1: nine layers with strain-dependent permeability; Model 2: three layers with strain-dependent permeability; Model 3: single layer with strain-dependent permeability; Model 4: nine layers with constant permeability).

RESULTS

Models 1 and 2 provided similar results with less than 3% difference in the peak effective stress, contact pressure, fluid pressure as well as fluid support ratio. However, Model 1 to Model 3 differed in stress and strain distribution patterns along depth over prolonged loads, which may provide an important insight into the highly inhomogeneous depth-dependent properties of cartilage. In addition, Model 1 with strain-dependent permeability demonstrated an enhanced capability on fluid pressurisation as compared with Model 4 which had constant permeability.

CONCLUSIONS

A highly inhomogeneous fibril-reinforced biphasic model considering both depth-dependent and strain-dependent properties was developed in this study, in order to illustrate the effect of highly inhomogeneous properties on the mechanical behaviour of the articular cartilage. The number of layers in the models with depth-dependent properties should be selected according to the research questions and clinical demands. The model with strain-dependent permeability offers an enhanced capability on fluid pressurisation. In future studies, the proposed model could be adopted in cell-models to provide more in-depth information or in tissue-engineering to optimize the depth-dependent scaffold structure.

Hybrid fluorescence-AFM explores articular surface degeneration in early osteoarthritis across length scales

Atomic force microscopy (AFM) has become a powerful tool for the characterization of materials at the nanoscale. Nevertheless, its application to hierarchical biological tissue like cartilage is still limited. One reason is that such samples are usually millimeters in size, while the AFM delivers much more localized information. Here a combination of AFM and fluorescence microscopy is presented where features on a millimeter sized tissue sample are selected by fluorescence microscopy on the micrometer scale and then mapped down to nanometer precision by AFM under native conditions. This served us to show that local changes in the organization of fluorescent stained cells, a marker for early osteoarthritis, correlate with a significant local reduction of the elastic modulus, local thinning of the collagen fibers, and a roughening of the articular surface. This approach is not only relevant for cartilage, but in general for the characterization of native biological tissue from the macro- to the nanoscale. STATEMENT OF SIGNIFICANCE: Different length scales have to be studied to understand the function and dysfunction of hierarchically organized biomaterials or tissues. Here we combine a highly stable AFM with fluorescence microscopy and precisely motorized movement to correlate micro- and nanoscopic properties of articular cartilage on a millimeter sized sample under native conditions. This is necessary for unraveling the relationship between microscale organization of chondrocytes, micrometer scale changes in articular cartilage properties and nanoscale organization of collagen (including D-banding). We anticipate that such studies pave the way for a guided design of hierarchical biomaterials.

Post-decellularization techniques ameliorate cartilage decellularization process for tissue engineering applications

Due to the current lack of innovative and effective therapeutic approaches, tissue engineering (TE) has attracted much attention during the last decades providing new hopes for the treatment of several degenerative disorders. Tissue engineering is a complex procedure, which includes processes of decellularization and recellularization of biological tissues or functionalization of artificial scaffolds by active cells. In this review, we have first discussed those conventional steps, which have led to great advancements during the last several years. Moreover, we have paid special attention to the new methods of post-decellularization that can significantly ameliorate the efficiency of decellularized cartilage extracellular matrix (ECM) for the treatment of osteoarthritis (OA). We propose a series of post-decellularization procedures to overcome the current shortcomings such as low mechanical strength and poor bioactivity to improve decellularized ECM scaffold towards much more efficient and higher integration.

Bioinspired Scaffold Designs for Regenerating Musculoskeletal Tissue Interfaces

The musculoskeletal system works at a very advanced level of synchrony, where all the physiological movements of the body are systematically performed through well-organized actions of bone in conjunction with all the other musculoskeletal soft tissues, such as ligaments, tendons, muscles, and cartilage through tissue-tissue interfaces. Interfaces are structurally and compositionally complex, consisting of gradients of extracellular matrix components, cell phenotypes as well as biochemical compositions and are important in mediating load transfer between the distinct orthopedic tissues during body movement. When an injury occurs at interface, it must be re-established to restore its function and stability. Due to the structural and compositional complexity found in interfaces, it is anticipated that they presuppose a concomitant increase in the complexity of the associated regenerative engineering approaches and scaffold designs to achieve successful interface regeneration and seamless integration of the engineered orthopedic tissues. Herein, we discuss the various bioinspired scaffold designs utilized to regenerate orthopedic tissue interfaces. First, we start with discussing the structure-function relationship at the interface. We then discuss the current understanding of the mechanism underlying interface regeneration, followed by discussing the current treatment available in the clinic to treat interface injuries. Lastly, we comprehensively discuss the state-of-the-art scaffold designs utilized to regenerate orthopedic tissue interfaces.

Tissue Engineering: An Alternative to Repair Cartilage

Herein we review the state-of-the-art in tissue engineering for repair of articular cartilage. First, we describe the molecular, cellular, and histologic structure and function of endogenous cartilage, focusing on chondrocytes, collagens, extracellular matrix, and proteoglycans. We then explore in vitro cell culture on scaffolds, discussing the difficulties involved in maintaining or obtaining a chondrocytic phenotype. Next, we discuss the diverse compounds and designs used for these scaffolds, including natural and synthetic biomaterials and porous, fibrous, and multilayer architectures. We then report on the mechanical properties of different cell-loaded scaffolds, and the success of these scaffolds following in vivo implantation in small animals, in terms of generating tissue that structurally and functionally resembles native tissue. Last, we highlight future trends in this field. We conclude that despite major technical advances made over the past 15 years, and continually improving results in cartilage repair experiments in animals, the development of clinically useful implants for regeneration of articular cartilage remains a challenge

Multiple umbilical cord-derived MSCs administrations attenuate rat osteoarthritis progression via preserving articular cartilage superficial layer cells and inhibiting synovitis

Background/objectives

Articular cartilage erosion probably plays a substantial role in osteoarthritis (OA) initiation and development. Studies demonstrated that umbilical cord–derived mesenchymal stem cells (UCMSCs) could delay chondrocytes apoptosis and ameliorate OA progression in patients, but the detailed mechanisms are largely uncharacterised. In this study, we aimed to study the effects of UCMSCs on monosodium iodoacetate (MIA)–induced rat OA model, and explore the cellular mechanism of this effect.

Methods

Intra-articular injection of 0.3 ​mg MIA in 50 ​μL saline was performed on the left knee of the 200 ​g weight male Sprague-Dawley rat to induce rat knee OA. A single dose of 2.5 ​× ​10⁵ undifferentiated UCMSCs one day after MIA or three-time intra-articular injection of 2.5 ​× ​10⁵ UCMSCs on Days 1, 7 ​and 14 were given, respectively. Four weeks after MIA, joints were harvested and processed for paraffin sections. Safranine-O staining, haematoxylin and eosin staining ​and immunohistochemistry of MMP-13, ADAMTS-5, Col-2, CD68 ​and CD4 were performed to observe cartilage erosion and synovium. For in vitro ​studies, migration ability of cartilage superficial layer cells (SFCs) by UCMSCs were accessed by transwell assay. Furthermore, catabolism change of MIA-induced SFCs by UCMSCs was performed by real-rime polymerase chain reaction of Col-X and BCL-2 genes. CCK-8 assay was performed to check proliferation ability of SFCs by UCMSCs-conditioned media.

Result

In this study, we locally injected human UCMSCs, which is highly proliferative and noninvasively collectible, into MIA-induced rat knee OA. An important finding is on obviously ameliorated cartilage erosion and decreased OA Mankin score by repeated UCMSCs injection after MIA injection compared with single injection, both of which attenuated OA progression compared with vehicle. Interestingly, we observed significantly increased number of SFCs on the articular cartilage surface, probably related to elevated proliferation, mobilisation and inhibited catabolism marker: Col-X and BCL-2 gene expression of cultured SFCs by UCMSCs-conditioned media treatment in vitro. In addition to the change of unique SFCs, catabolism markers of ADAMTS-5 and MMP-13 were substantially upregulated in the whole cartilage layer chondrocytes as well. Strikingly, MIA-induced inflammatory cells infiltration, on both CD4+ Th cells and CD68+ macrophages, and hyperplasia of the synovium, which was alleviated by repeated UCMSCs injection.

Conclusion

Our study demonstrated a critical role of repeated UCMSCs dosing on preserving SFCs function, cartilage structure and inhibiting synovitis during OA progression, and thus provided mechanistic proof of evidence for the use of UCMSCs on OA patients in the future.

The translational potential of this article

UCMSCs are a relatively “young” stem cell, and noninvasively collectible. In our study, we clearly demonstrated that it could effectively delay OA progression, possibly through reserving SFCs function and inhibiting synovitis. Therefore, it could be a new promising therapeutic cell source for OA after further clinical trials.

High-Temperature Requirement A1 Protease as a Rate-Limiting Factor in the Development of Osteoarthritis

Preserving the mature articular cartilage of joints is a critical focus in the prevention and treatment of osteoarthritis. We determined whether the genetic inactivation of high-temperature requirement A1 (HtrA1) can significantly attenuate the degradation of articular or condylar cartilage. Two types of mouse models of osteoarthritis were used, a spontaneous mutant mouse model [type XI collagen-haploinsufficient (Col11a1^+/-) mice] and two post-traumatic mouse models [destabilization of the medial meniscus (DMM) on the knee and a partial discectomy (PDE) on the temporomandibular joint]. Three different groups of mice were generated: i) HtrA1 was genetically deleted from Col11a1^+/- mice (HtrA1^-/-;Col11a1^+/-), ii) HtrA1-deficient mice (HtrA1^-/-) were subjected to DMM, and iii) HtrA1^-/- mice were subjected to PDE. Knee and temporomandibular joints from the mice were characterized for evidence of cartilage degeneration. The degradation of articular or condylar cartilage was significantly delayed in HtrA1^-/-;Col11a1^+/- mice and HtrA1^-/- mice after DMM or PDE. The amount of collagen type VI was significantly higher in the articular cartilage in HtrA1^-/-;Col11a1^+/- mice, compared with that in Col11a1^+/- mice. The genetic removal of HtrA1 may delay the degradation of articular or condylar cartilage in mice.

Changes in the appendicular skeleton during metamorphosis in the axolotl salamander (Ambystoma mexicanum)

Axolotl salamanders (Ambystoma mexicanum) remain aquatic in their natural state, during which biomechanical forces on their diarthrodial limb joints are likely reduced relative to salamanders living on land. However, even as sexually mature adults, these amphibians can be induced to metamorphose into a weight-bearing terrestrial stage by environmental stress or the exogenous administration of thyroxine hormone. In some respects, this aquatic to terrestrial transition of axolotl salamanders through metamorphosis may model developmental and changing biomechanical skeletal forces in mammals during the prenatal to postnatal transition at birth and in the early postnatal period. To assess differences in the appendicular skeleton as a function of metamorphosis, anatomical and gene expression parameters were compared in skeletal tissues between aquatic and terrestrial axolotls that were the same age and genetically full siblings. The length of long bones and area of cuboidal bones in the appendicular skeleton, as well as the cellularity of cartilaginous and interzone tissues of femorotibial joints were generally higher in aquatic axolotls compared with their metamorphosed terrestrial siblings. A comparison of steady-state mRNA transcripts encoding aggrecan core protein (ACAN), type II collagen (COL2A1), and growth and differentiation factor 5 (GDF5) in femorotibial cartilaginous and interzone tissues did not reveal any significant differences between aquatic and terrestrial axolotls.

A cryoSEM Method for Preservation and Visualization of Calcified Shark Cartilage (And Other Stubborn Heterogeneous Skeletal Tissues)

Biological materials interest biologists and engineers for their complex interactions among constituents and unique mechanical properties. While the heterogeneous tissue structure and its material properties are responsible for intriguing biomechanics, they pose challenges for sectioning, particularly in regions with stark tissue boundaries. Microscopists level this playing field when sectioning samples by embedding them in paraffin or plastic; but for scanning electron microscopy, natural morphology must be preserved without sacrificing the sample’s surface contours. Here we outline a simple preparation method for visualizing in cryoSEM the calcified cartilage of sharks and rays (elasmobranch fishes), a layered biocomposite that has traditionally been considered difficult to prepare for microscopy.

Alterations in structural macromolecules and chondrocyte deformations in lapine retropatellar cartilage 9 weeks after anterior cruciate ligament transection

The structural integrity and mechanical environment of the articular cartilage matrix directly affect chondrocyte deformations. Rabbit models of early osteoarthritis at 9 weeks following anterior cruciate ligament transection (ACLT) have been shown to alter the deformation behavior of superficial zone chondrocytes in mechanically loaded articular cartilage. However, it is not fully understood whether these changes in cell mechanics are caused by changes in structural macromolecules in the extracellular matrix. Therefore, the purpose of this study was to characterize the proteoglycan content, collagen content, and collagen orientation at 9 weeks post ACLT using microscopic techniques, and relate these changes to the altered cell mechanics observed upon mechanical loading of cartilage. At 9 weeks following ACLT, collagen orientation was significantly (p < 0.05) altered and proteoglycan content was significantly (p < 0.05) reduced in the superficial zone cartilage matrix. These structural changes either in the extracellular or pericellular matrix (ECM and PCM) were also correlated significantly (p < 0.05) with chondrocyte width and height changes, thereby suggesting that chondrocyte deformation response to mechanical compression in early OA changes primarily because of alterations in matrix structure. However, compared to the normal group, proteoglycan content in the PCM from the ACLT group decreased less than that in the surrounding ECM. Therefore, PCM could play a key role to protect excessive chondrocyte deformations in the ACLT group. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:342-350, 2018.

Biomaterials for articular cartilage tissue engineering: Learning from biology

Articular cartilage is commonly described as a tissue that is made of up to 80% water, is devoid of blood vessels, nerves, and lymphatics, and is populated by only one cell type, the chondrocyte. At first glance, an easy tissue for clinicians to repair and for scientists to reproduce in a laboratory. Yet, chondral and osteochondral defects currently remain an open challenge in orthopedics and tissue engineering of the musculoskeletal system, without considering osteoarthritis. Why do we fail in repairing and regenerating articular cartilage? Behind its simple and homogenous appearance, articular cartilage hides a heterogeneous composition, a high level of organisation and specific biomechanical properties that, taken together, make articular cartilage a unique material that we are not yet able to repair or reproduce with high fidelity. This review highlights the available therapies for cartilage repair and retraces the research on different biomaterials developed for tissue engineering strategies. Their potential to recreate the structure, including composition and organisation, as well as the function of articular cartilage, intended as cell microenvironment and mechanically competent replacement, is described. A perspective of the limitations of the current research is given in the light of the emerging technologies supporting tissue engineering of articular cartilage.

STATEMENT OF SIGNIFICANCE

The mechanical properties of articular tissue reflect its functionally organised composition and the recreation of its structure challenges the success of in vitro and in vivo reproduction of the native cartilage. Tissue engineering and biomaterials science have revolutionised the way scientists approach the challenge of articular cartilage repair and regeneration by introducing the concept of the interdisciplinary approach. The clinical translation of the current approaches are not yet fully successful, but promising results are expected from the emerging and developing new generation technologies.

Current strategies for integrative cartilage repair

Osteoarthritis (OA) is a degenerative joint condition characterized by painful cartilage lesions that impair joint mobility. Current treatments such as lavage, microfracture, and osteochondral implantation fail to integrate newly formed tissue with host tissues and establish a stable transition to subchondral bone. Similarly, tissue-engineered grafts that facilitate cartilage and bone regeneration are challenged by how to integrate the graft seamlessly with surrounding host cartilage and/or bone. This review centers on current approaches to promote cartilage graft integration. It begins with an overview of articular cartilage structure and function, as well as degenerative changes to this relationship attributed to aging, disease, and trauma. A discussion of the current progress in integrative cartilage repair follows, focusing on graft or scaffold design strategies targeting cartilage-cartilage and/or cartilage-bone integration. It is emphasized that integrative repair is required to ensure long-term success of the cartilage graft and preserve the integrity of the newly engineered articular cartilage. Studies involving the use of enzymes, choice of cell source, biomaterial selection, growth factor incorporation, and stratified versus gradient scaffolds are therefore highlighted. Moreover, models that accurately evaluate the ability of cartilage grafts to enhance tissue integrity and prevent ectopic calcification are also discussed. A summary and future directions section concludes the review.

Improving cartilage phenotype from differentiated pericytes in tunable peptide hydrogels

Differentiation of stem cells to chondrocytes in vitro usually results in a heterogeneous phenotype. This is evident in the often detected over expression of type X collagen which, in hyaline cartilage structure is not characteristic of the mid-zone but of the deep-zone ossifying tissue. Methods to better match cartilage developed in vitro to characteristic in vivo features are therefore highly desirable in regenerative medicine. This study compares phenotype characteristics between pericytes, obtained from human adipose tissue, differentiated using diphenylalanine/serine (F₂/S) peptide hydrogels with the more widely used chemical induced method for chondrogenesis. Significantly higher levels of type II collagen were noted when pericytes undergo chondrogenesis in the hydrogel in the absence of induction media. There is also a balanced expression of collagen relative to aggrecan production, a feature which was biased toward collagen production when cells were cultured with induction media. Lastly, metabolic profiles of each system show considerable overlap between both differentiation methods but subtle differences which potentially give rise to their resultant phenotype can be ascertained. The study highlights how material and chemical alterations in the cellular microenvironment have wide ranging effects on resultant tissue type.

Systems Based Study of the Therapeutic Potential of Small Charged Molecules for the Inhibition of IL-1 Mediated Cartilage Degradation

Inflammatory cytokines are key drivers of cartilage degradation in post-traumatic osteoarthritis. Cartilage degradation mediated by these inflammatory cytokines has been extensively investigated using in vitro experimental systems. Based on one such study, we have developed a computational model to quantitatively assess the impact of charged small molecules intended to inhibit IL-1 mediated cartilage degradation. We primarily focus on the simplest possible computational model of small molecular interaction with the IL-1 system-direct binding of the small molecule to the active site on the IL-1 molecule itself. We first use the model to explore the uptake and release kinetics of the small molecule inhibitor by cartilage tissue. Our results show that negatively charged small molecules are excluded from the negatively charged cartilage tissue and have uptake kinetics in the order of hours. In contrast, the positively charged small molecules are drawn into the cartilage with uptake and release timescales ranging from hours to days. Using our calibrated computational model, we subsequently explore the effect of small molecule charge and binding constant on the rate of cartilage degradation. The results from this analysis indicate that the small molecules are most effective in inhibiting cartilage degradation if they are either positively charged and/or bind strongly to IL-1α, or both. Furthermore, our results showed that the cartilage structural homeostasis can be restored by the small molecule if administered within six days following initial tissue exposure to IL-1α. We finally extended the scope of the computational model by simulating the competitive inhibition of cartilage degradation by the small molecule. Results from this model show that small molecules are more efficient in inhibiting cartilage degradation by binding directly to IL-1α rather than binding to IL-1α receptors. The results from this study can be used as a template for the design and development of more pharmacologically effective osteoarthritis drugs, and to investigate possible therapeutic options.

Supramolecular Organization of Collagen Fibrils in Healthy and Osteoarthritic Human Knee and Hip Joint Cartilage

Cartilage matrix is a composite of discrete, but interacting suprastructures, i.e. cartilage fibers with microfibrillar or network-like aggregates and penetrating extrafibrillar proteoglycan matrix. The biomechanical function of the proteoglycan matrix and the collagen fibers are to absorb compressive and tensional loads, respectively. Here, we are focusing on the suprastructural organization of collagen fibrils and the degradation process of their hierarchical organized fiber architecture studied at high resolution at the authentic location within cartilage. We present electron micrographs of the collagenous cores of such fibers obtained by an improved protocol for scanning electron microscopy (SEM). Articular cartilages are permeated by small prototypic fibrils with a homogeneous diameter of 18 ± 5 nm that can align in their D-periodic pattern and merge into larger fibers by lateral association. Interestingly, these fibers have tissue-specific organizations in cartilage. They are twisted ropes in superficial regions of knee joints or assemble into parallel aligned cable-like structures in deeper regions of knee joint- or throughout hip joints articular cartilage. These novel observations contribute to an improved understanding of collagen fiber biogenesis, function, and homeostasis in hyaline cartilage.

Discoidin Domain Receptor 2 as a Potential Therapeutic Target for Development of Disease-Modifying Osteoarthritis Drugs

Osteoarthritis (OA) is the most common form of arthritis disorders, but the identification of therapeutic targets to effectively prevent OA has been increasingly difficult. The goal of this investigation is to provide experimental evidence that discoidin domain receptor 2 (DDR2) may be an ideal target for the development of disease-modifying OA drugs. Ddr2 was conditionally deleted from articular cartilage of adult mouse knee joints. Aggrecan-CreERT2;floxed Ddr2 mice, which were generated by crossing Aggrecan-CreERT2 mice with floxed Ddr2 mice, then received tamoxifen injections at the age of 8 weeks. The mice were then subjected to destabilization of the medial meniscus (DMM) surgery. At 8 and 16 weeks after DMM, mice were euthanized for the collection of knee joints. In a separate experiment, Aggrecan-CreERT2;floxed Ddr2 mice were subjected to DMM at the age of 10 weeks. The mice then received tamoxifen injections at 8 weeks after DMM. The mice were euthanized for the collection of knee joints at 16 weeks after DMM. The progressive process of articular cartilage degeneration was significantly delayed in the knee joints of Ddr2-deficient mice in comparison to their control littermates. Articular cartilage damage in the knee joints of the mice was associated with increased expression profiles of both Ddr2 and matrix metalloproteinase 13. These findings suggest that DDR2 may be an ideal target for the development of disease-modifying OA drugs.

Second harmonic generation imaging reveals a distinct organization of collagen fibrils in locations associated with cartilage growth

PURPOSE

The articular-epiphyseal cartilage complex (AECC) is responsible for the expansion of the bone ends and serves the function of the articular cartilage in juvenile mammals. Bundles of collagen fibrils surrounding cells were in the literature observed more frequently near the articular surface of the AECC. The articular surface, the perichondrium, and cartilage canals are interfaces where appositional growth of the AECC has been demonstrated. The current study aimed to evaluate the potential of second harmonic generation (SHG) to locate the collagen fibril bundles near the articular surface and to examine whether a comparable collagen fibril organization could be observed near the other interfaces of the AECC.

MATERIALS AND METHODS

The study included the femoral condyle of four piglets aged 82-141 days. The forward and backward scattered SHG, and their ratio, was analyzed across the AECC using objectives with different numerical aperture. Two-photon-excited fluorescence was used to visualize cells.

RESULTS

A similar pattern of collagen fibril organization was observed near the articular surface, around cartilage canals, and adjacent to the perichondrium. The pattern consisted of a higher ratio of forward to backward scattered SHG that increased relative to the surrounding matrix at lower numerical aperture. This was interpreted to reflect collagen fibril bundles in the territorial matrix of cells in these areas.

CONCLUSIONS

The observed arrangement of collagen fibrils was suggested to be related to the presumed different growth activity in these areas and indicated that SHG may be used as an indirect and label-free marker for cartilage matrix growth.

Articular cartilage: from formation to tissue engineering

Hyaline cartilage is the nonlinear, inhomogeneous, anisotropic, poro-viscoelastic connective tissue that serves as friction-reducing and load-bearing cushion in synovial joints and is vital for mammalian skeletal movements. Due to its avascular nature, low cell density, low proliferative activity and the tendency of chondrocytes to de-differentiate, cartilage cannot regenerate after injury, wear and tear, or degeneration through common diseases such as osteoarthritis. Therefore severe damage usually requires surgical intervention. Current clinical strategies to generate new tissue include debridement, microfracture, autologous chondrocyte transplantation, and mosaicplasty. While articular cartilage was predicted to be one of the first tissues to be successfully engineered, it proved to be challenging to reproduce the complex architecture and biomechanical properties of the native tissue. Despite significant research efforts, only a limited number of studies have evolved up to the clinical trial stage. This review article summarizes the current state of cartilage tissue engineering in the context of relevant biological aspects, such as the formation and growth of hyaline cartilage, its composition, structure and biomechanical properties. Special attention is given to materials development, scaffold designs, fabrication methods, and template-cell interactions, which are of great importance to the structure and functionality of the engineered tissue.

Modeling IL-1 induced degradation of articular cartilage

In this study, we develop a computational model to simulate the in vitro biochemical degradation of articular cartilage explants sourced from the femoropatellar grooves of bovine calves. Cartilage explants were incubated in culture medium with and without the inflammatory cytokine IL-1α. The spatio-temporal evolution of the cartilage explant's extracellular matrix components is modelled. Key variables in the model include chondrocytes, aggrecan, collagen, aggrecanase, collagenase and IL-1α. The model is first calibrated for aggrecan homeostasis of cartilage in vivo, then for data on (explant) controls, and finally for data on the IL-1α driven proteolysis of aggrecan and collagen over a 4-week period. The model was found to fit the experimental data best when: (i) chondrocytes continue to synthesize aggrecan during the cytokine challenge, (ii) a one to two day delay is introduced between the addition of IL-1α to the culture medium and subsequent aggrecanolysis, (iii) collagen degradation does not commence until the total concentration of aggrecan (i.e. both intact and degraded aggrecan) at any specific location within the explant becomes ≤ 1.5 mg/ml and (iv) degraded aggrecan formed due to the IL-1α induced proteolysis of intact aggrecan protects the collagen network while collagen degrades in a two-step process which, together, significantly modulate the collagen network degradation. Under simulated in vivo conditions, the model predicts increased aggrecan turnover rates in the presence of synovial IL-1α, consistent with experimental observations. Such models may help to infer the course of events in vivo following traumatic joint injury, and may also prove useful in quantitatively evaluating the efficiency of various therapeutic molecules that could be employed to avoid or modify the course of cartilage disease states.

Does periacetabular osteotomy have depth-related effects on the articular cartilage of the hip?

BACKGROUND

Osteoarthritis may result from abnormal mechanics leading to biochemically mediated degradation of cartilage. In a dysplastic hip, the periacetabular osteotomy (PAO) is designed to normalize the mechanics and our initial analysis suggests that it may also alter the cartilage biochemical composition. Articular cartilage structure and biology vary with the depth from the articular surface including the concentration of glycosaminoglycans (GAG), which are the charge macromolecules that are rapidly turned over and are lost in early osteoarthritis. Delayed gadolinium-enhanced magnetic resonance imaging of cartilage (dGEMRIC) enables noninvasive measurement of cartilage GAG content. The dGEMRIC index represents an indirect measure of GAG concentration with lower values indicating less GAG content. GAG content can normally vary with mechanical loading; however, progressive loss of GAG is associated with osteoarthritis. By looking at the changes in amounts of GAG in response to a PAO at different depths of cartilage, we may gain further insights into the types of biologic events that are occurring in the joint after a PAO.

QUESTIONS/PURPOSES

We (1) measured the GAG content in the superficial and deep zones for the entire joint before and after PAO; and (2) investigated if the changes in the superficial and deep zone GAG content after PAO varied with different locations within the joint.

METHODS

This prospective study included 37 hips in 37 patients (mean age 26 ± 9 years) who were treated with periacetabular osteotomy for symptomatic acetabular dysplasia and had preoperative and 1-year follow up dGEMRIC scans. Twenty-eight of the 37 also had 2-year scans. Patients were eligible if they had symptomatic acetabular dysplasia with lateral center-edge angle < 20° and no or minimal osteoarthritis. The change in dGEMRIC after surgery was assessed in the superficial and deep cartilage zones at five acetabular radial planes.

RESULTS

The mean ± SD dGEMRIC index in the superficial zone fell from 480 ± 137 msec preoperatively to 409 ± 119 msec at Year 1 (95% confidence interval [CI], -87 to -54; p < 0.001) and recovered to 451 ± 115 msec at Year 2 (95% CI, 34-65; p < 0.001), suggesting that there is a transient event that causes the biologically sensitive superficial layer to lose GAG. In the deep acetabular cartilage zone, dGEMRIC index fell from 527 ± 148 msec preoperatively to 468 ± 143 msec at Year 1 (95% CI, -66 to -30; p < 0.001) and recovered to 494 ± 125 msec at Year 2 (95% CI, 5-32; p = 0.008). When each acetabular radial plane was looked at separately, the change from before surgery to 1 year after was confined to zones around the superior part of the joint. The only significant change from 1 to 2 years was an increase in the superficial layer of the superior zone (1 year 374 ± 123 msec, 2 year 453 ± 117 msec, p < 0.006).

CONCLUSIONS

This study suggests that PAO may alter the GAG content of the articular cartilage with a greater effect on the superficial zone compared with the deeper acetabular cartilage zone, especially at the superior aspect of the joint. Some surgeons have observed that surgery itself can be a stressor that can accelerate joint degeneration. Perhaps the decrease in dGEMRIC index seen in the superficial layer may be a catabolic response to postsurgical inflammation given that some recovery was seen at 2 years. The decrease in dGEMRIC index in the deep layer seen mainly near the superior part of the joint is persistent and may represent a response of articular cartilage to normalization of increased mechanical load seen in this region after osteotomy, which may be a normal response to alteration in loading.

CLINICAL RELEVANCE

This study looks at the biochemical changes in the articular cartilage before and after a PAO for dysplastic hips using MRI in a similar manner to using histological methods to study alterations in articular cartilage with mechanical loading. Although PAO alters alignment and orientation of the acetabulum, its effects on cartilage biology are not clear. dGEMRIC provides a noninvasive method of assessing these effects.

Comprehensive analysis of translational osteochondral repair: Focus on the histological assessment

Articular cartilage guarantees for an optimal functioning of diarthrodial joints by providing a gliding surface for smooth articulation, weight distribution, and shock absorbing while the subchondral bone plays a crucial role in its biomechanical and nutritive support. Both tissues together form the osteochondral unit. The structural assessment of the osteochondral unit is now considered the key standard procedure for evaluating articular cartilage repair in translational animal models. The aim of this review is to give a detailed overview of the different methods for a comprehensive evaluation of osteochondral repair. The main focus is on the histological assessment as the gold standard, together with immunohistochemistry, and polarized light microscopy. Additionally, standards of macroscopic, non-destructive imaging such as high resolution MRI and micro-CT, biochemical, and molecular biological evaluations are addressed. Potential pitfalls of analysis are outlined. A second focus is to suggest recommendations for osteochondral evaluation.

Advances in understanding cartilage remodeling

Cartilage remodeling is currently among the most popular topics in osteoarthritis research. Remodeling includes removal of the existing cartilage and replacement by neo-cartilage. As a loss of balance between removal and replacement of articular cartilage develops (particularly, the rate of removal surpasses the rate of replacement), joints will begin to degrade. In the last few years, significant progress in molecular understanding of the cartilage remodeling process has been made. In this brief review, we focus on the discussion of some current "controversial" observations in articular cartilage degeneration: (1) the biological effect of transforming growth factor-beta 1 on developing and mature articular cartilages, (2) the question of whether aggrecanase 1 (ADAMTS4) and aggrecanase 2 (ADAMTS5) are key enzymes in articular cartilage destruction, and (3) chondrocytes versus chondron in the development of osteoarthritis. It is hoped that continued discussion and investigation will follow to better clarify these topics. Clarification will be critical for those in search of novel therapeutic targets for the treatment of osteoarthritis.

Biomimetic biphasic scaffolds for osteochondral defect repair

The osteochondral defects caused by vigorous trauma or physical disease are difficult to be managed. Tissue engineering provides a possible option to regenerate the damaged osteochondral tissues. For osteochondral reconstruction, one intact scaffold should be considered to support the regeneration of both cartilage and subchondral bone. Therefore, the biphasic scaffolds with the mimic structures of osteochondral tissues have been developed to close this chasm. A variety of biomimetic bilayer scaffolds fabricated from natural or synthetic polymers, or the ones loading with growth factors, cells, or both of them make great progresses in osteochondral defect repair. In this review, the preparation and in vitro and/or in vivo verification of bioinspired biphasic scaffolds are summarized and discussed, as well as the prospect is predicted.

Time evolution of in vivo articular cartilage repair induced by bone marrow stimulation and scaffold implantation in rabbits

PURPOSE

Tissue engineering techniques were used to study cartilage repair over a 12-month period in a rabbit model.

METHODS

A full-depth chondral defect along with subchondral bone injury were originated in the knee joint, where a biostable porous scaffold was implanted, synthesized of poly(ethyl acrylate-co-hydroxyethyl acrylate) copolymer. Morphological evolution of cartilage repair was studied 1 and 2 weeks, and 1, 3, and 12 months after implantation by histological techniques. The 3-month group was chosen to compare cartilage repair to an additional group where scaffolds were preseeded with allogeneic chondrocytes before implantation, and also to controls, who underwent the same surgery procedure, with no scaffold implantation.

RESULTS

Neotissue growth was first observed in the deepest scaffold pores 1 week after implantation, which spread thereafter; 3 months later scaffold pores were filled mostly with cartilaginous tissue in superficial and middle zones, and with bone tissue adjacent to subchondral bone. Simultaneously, native chondrocytes at the edges of the defect started to proliferate 1 week after implantation; within a month those edges had grown centripetally and seemed to embed the scaffold, and after 3 months, hyaline-like cartilage was observed on the condylar surface. Preseeded scaffolds slightly improved tissue growth, although the quality of repair tissue was similar to non-preseeded scaffolds. Controls showed that fibrous cartilage was mainly filling the repair area 3 months after surgery. In the 12-month group, articular cartilage resembled the untreated surface.

CONCLUSIONS

Scaffolds guided cartilaginous tissue growth in vivo, suggesting their importance in stress transmission to the cells for cartilage repair.

The Effect of Biomolecular Gradients on Mesenchymal Stem Cell Chondrogenesis under Shear Stress

Tissue engineering is viewed as a promising option for long-term repair of cartilage lesions, but current engineered cartilage constructs fail to match the mechanical properties of native tissue. The extracellular matrix of adult human articular cartilage contains highly organized collagen fibrils that enhance the mechanical properties of the tissue. Unlike articular cartilage, mesenchymal stem cell (MSC) based tissue engineered cartilage constructs lack this oriented microstructure and therefore display much lower mechanical strength. The goal of this study was to investigate the effect of biomolecular gradients and shear stress on MSCs undergoing chondrogenesis within a microfluidic device. Via poly(dimethyl siloxane) soft-lithography, microfluidic devices containing a gradient generator were created. Human MSCs were seeded within these chambers and exposed to flow-based transforming growth factor β1 (TGF-β1) gradients. When the MSCs were both confluent and exposed to shear stress, the cells aligned along the flow direction. Exposure to TGF-β1 gradients led to chondrogenesis of MSCs, indicated by positive type II collagen staining. These results, together with a previous study that showed that aligned MSCs produce aligned collagen, suggest that oriented cartilage tissue structures with superior mechanical properties can be obtained by aligning MSCs along the flow direction and exposing MSCs to chondrogenic gradients.

A depth dependent transversely isotropic micromechanic model of articular cartilage

Articular cartilage owing to the variation of collagen fibers orientation through its zones has been indicated to have depth dependent mechanical properties. The aim of this study was to present an innovative micromechanics model to predict the depth dependent mechanical properties of articular cartilage as a function of collagen fibers and proteoglycan matrix mechanical properties, collagen fibers volume fraction as well as angle toward cartilage surface. The variation of collagen fibers angle toward the cartilage surface as a function of cartilage depth was computed using the micromechanics model. This function showed that the collagen fibers parallel to the cartilage surface in the superficial zone have a nonlinear angle variation in the transition zone and become perpendicular to cartilage surface in the deep zone. Depth dependent elastic modulus in perpendicular to cartilage surface plane direction was calculated using presented micromechanics model and variation function of the collagen fibers' angle. The results revealed a suitable agreement with that of the experimental measurements in different samples at different ages and races (R2=0.944). The results also showed that the elastic and aggregate modules perpendicular to the cartilage surface plane in the deep zone were 25.8 and 26.3 times higher than that of the superficial zone, respectively. These findings have implications not only for computing the depth dependent mechanical properties of any type of articular cartilage at different ages and races, but also of potential ability for developing a depth dependent transversely isotropic biphasic model to predict the accurate mechanical behavior of articular cartilage.

The structure and function of the pericellular matrix of articular cartilage

Chondrocytes in articular cartilage are surrounded by a narrow pericellular matrix (PCM) that is both biochemically and biomechanically distinct from the extracellular matrix (ECM) of the tissue. While the PCM was first observed nearly a century ago, its role is still under investigation. In support of early hypotheses regarding its function, increasing evidence indicates that the PCM serves as a transducer of biochemical and biomechanical signals to the chondrocyte. Work over the past two decades has established that the PCM in adult tissue is defined biochemically by several molecular components, including type VI collagen and perlecan. On the other hand, the biomechanical properties of this structure have only recently been measured. Techniques such as micropipette aspiration, in situ imaging, computational modeling, and atomic force microscopy have determined that the PCM exhibits distinct mechanical properties as compared to the ECM, and that these properties are influenced by specific PCM components as well as disease state. Importantly, the unique relationships among the mechanical properties of the chondrocyte, PCM, and ECM in different zones of cartilage suggest that this region significantly influences the stress-strain environment of the chondrocyte. In this review, we discuss recent advances in the measurement of PCM mechanical properties and structure that further increase our understanding of PCM function. Taken together, these studies suggest that the PCM plays a critical role in controlling the mechanical environment and mechanobiology of cells in cartilage and other cartilaginous tissues, such as the meniscus or intervertebral disc.

How best to preserve and reveal the structural intricacies of cartilaginous tissue

No single processing technique is capable of optimally preserving each and all of the structural entities of cartilaginous tissue. Hence, the choice of methodology must necessarily be governed by the nature of the component that is targeted for analysis, for example, fibrillar collagens or proteoglycans within the extracellular matrix, or the chondrocytes themselves. This article affords an insight into the pitfalls that are to be encountered when implementing the available techniques and how best to circumvent them. Adult articular cartilage is taken as a representative pars pro toto of the different bodily types. In mammals, this layer of tissue is a component of the synovial joints, wherein it fulfills crucial and diverse biomechanical functions. The biomechanical functions of articular cartilage have their structural and molecular correlates. During the natural course of postnatal development and after the onset of pathological disease processes, such as osteoarthritis, the tissue undergoes structural changes which are intimately reflected in biomechanical modulations. The fine structural intricacies that subserve the changes in tissue function can be accurately assessed only if they are faithfully preserved at the molecular level. For this reason, a careful consideration of the tissue-processing technique is indispensable. Since, as aforementioned, no single methodological tool is capable of optimally preserving all constituents, the approach must be pre-selected with a targeted structure in view. Guidance in this choice is offered.

Blends and Nanocomposite Biomaterials for Articular Cartilage Tissue Engineering

This review provides a comprehensive assessment on polymer blends and nanocomposite systems for articular cartilage tissue engineering applications. Classification of various types of blends including natural/natural, synthetic/synthetic systems, their combination and nanocomposite biomaterials are studied. Additionally, an inclusive study on their characteristics, cell responses ability to mimic tissue and regenerate damaged articular cartilage with respect to have functionality and composition needed for native tissue, are also provided.

UTE imaging in the musculoskeletal system

Tissues, such as bone, tendon, and ligaments, contain a high fraction of components with "short" and "ultrashort" transverse relaxation times and therefore have short mean transverse relaxation times. With conventional magnetic resonance imaging (MRI) sequences that employ relatively long echo times (TEs), there is no opportunity to encode the decaying signal of short and ultrashort T2 /T2 * tissues before it has reached zero or near zero. The clinically compatible ultrashort TE (UTE) sequence has been increasingly used to study the musculoskeletal system. This article reviews the UTE sequence as well as various modifications that have been implemented since its introduction. These modifications have been used to improve efficiency or contrast as well as provide quantitative analysis. This article reviews several clinical musculoskeletal applications of UTE.

Current perspectives in stem cell research for knee cartilage repair

Protocols based on the delivery of stem cells are currently applied in patients, showing encouraging results for the treatment of articular cartilage lesions (focal defects, osteoarthritis). Yet, restoration of a fully functional cartilage surface (native structural organization and mechanical functions) especially in the knee joint has not been reported to date, showing the need for improved designs of clinical trials. Various sources of progenitor cells are now available, originating from adult tissues but also from embryonic or reprogrammed tissues, most of which have already been evaluated for their chondrogenic potential in culture and for their reparative properties in vivo upon implantation in relevant animal models of cartilage lesions. Nevertheless, particular attention will be needed regarding their safe clinical use and their potential to form a cartilaginous repair tissue of proper quality and functionality in the patient. Possible improvements may reside in the use of biological supplements in accordance with regulations, while some challenges remain in establishing standardized, effective procedures in the clinics.

Dependence of optical attenuation coefficient and mechanical tension of irradiated human cartilage measured by optical coherence tomography

As banked human tissues are not widely available, the development of new non-destructive and contactless techniques to evaluate the quality of allografts before distribution for transplantation is very important. Also, tissues will be processed accordingly to standard procedures and to minimize disease transmission most tissue banks will include a decontamination or sterilization step such as ionizing radiation. In this work, we present a new method to evaluate the internal structure of frozen or glycerol-processed human cartilages, submitted to various dosis of irradiation, using the total optical attenuation coefficient retrieved from optical coherence tomography (OCT) images. Our results show a close relationship between tensile properties and the total optical attenuation coefficient of cartilages. Therefore, OCT associated with the total optical attenuation coefficient open a new window to evaluate quantitatively biological changes in processed tissues.

Micromechanical mapping of early osteoarthritic changes in the pericellular matrix of human articular cartilage

OBJECTIVE

Osteoarthritis (OA) is a degenerative joint disease characterized by the progressive loss of articular cartilage. While macroscale degradation of the cartilage extracellular matrix (ECM) has been extensively studied, microscale changes in the chondrocyte pericellular matrix (PCM) and immediate microenvironment with OA are not fully understood. The objective of this study was to quantify osteoarthritic changes in the micromechanical properties of the ECM and PCM of human articular cartilage in situ using atomic force microscopy (AFM).

METHOD

AFM elastic mapping was performed on cryosections of human cartilage harvested from both condyles of macroscopically normal and osteoarthritic knee joints. This method was used to test the hypotheses that both ECM and PCM regions exhibit a loss of mechanical properties with OA and that the size of the PCM is enlarged in OA cartilage as compared to normal tissue.

RESULTS

Significant decreases were observed in both ECM and PCM moduli of 45% and 30%, respectively, on the medial condyle of OA knee joints as compared to cartilage from macroscopically normal joints. Enlargement of the PCM, as measured biomechanically, was also observed in medial condyle OA cartilage, reflecting the underlying distribution of type VI collagen in the region. No significant differences were observed in elastic moduli or their spatial distribution on the lateral condyle between normal and OA joints.

CONCLUSION

Our findings provide new evidence of significant site-specific degenerative changes in the chondrocyte micromechanical environment with OA.

The layered structure of the articular surface

OBJECTIVE

Articular cartilage is roughly separated into three areas: the tangential, middle, and deep zones. The structure and molecular components of an additional important zone, the most superficial zone (MSZ), which directly faces the joint cavity, have yet to be conclusively elucidated. The purpose of the present study was to use multiple methods to study the MSZ in order to determine its structure.

MATERIALS AND METHODS

Knees from 16 pigs (age, 6 months) were used. Full-thickness cartilage specimens were harvested from the femoral groove. The MSZ was observed using light microscopy, transmission electron microscopy (TEM), and scanning electron microscopy (SEM) in combination with histochemical and immunohistochemical methods.

RESULTS

The combined findings from the three different observational methods indicate that the MSZ is subdivided into three layers. Among these three layers, collagen subtypes I, II, and III are present in the innermost (third) layer of the MSZ. Beneath the third layer, type II collagen is the predominant type, with small amounts of type III collagen. This layer beneath the third layer is considered to be the tangential layer.

CONCLUSIONS

Our observations indicate that the MSZ is subdivided into three layers. Further analysis of the molecular components in each layer may improve our understanding of the structure of the articular surface.

Dependence of optical attenuation coefficient and mechanical tension of irradiated human cartilage measured by optical coherence tomography

As banked human tissues are not widely available, the development of new non-destructive and contactless techniques to evaluate the quality of allografts before distribution for transplantation is very important. Also, tissues will be processed accordingly to standard procedures and to minimize disease transmission most tissue banks will include a decontamination or sterilization step such as ionizing radiation. In this work, we present a new method to evaluate the internal structure of frozen or glycerol processed human cartilages, submitted to various dosis of irradiation, using the total optical attenuation coefficient retrieved from optical coherence tomography (OCT) images. Our results show a close relationship between tensile properties and the total optical attenuation coefficient of cartilages. Therefore, OCT associated with the total optical attenuation coefficient open a new window to evaluate quantitatively biological changes in processed tissues.

Comparison of Three Methods to Quantify Repair Cartilage Collagen Orientation

OBJECTIVE

The aim of this study was to determine if the noninvasive or minimally invasive and nondestructive imaging techniques of quantitative T2-mapping or multiphoton microscopy (MPM) respectively, could detect differences in cartilage collagen orientation similar to polarized light microscopy (PLM). It was hypothesized that MRI, MPM, and PLM would all detect quantitative differences between repair and normal cartilage tissue.

METHODS

Osteochondral defects in the medial femoral condyle were created and repaired in 5 mature goats. Postmortem, MRI with T2-mapping and histology were performed. T2 maps were generated and a mean T2 value was calculated for each region of interest. Histologic slides were assessed using MPM with measurements of autocorrelation ellipticity, and by PLM with application of a validated scoring method. Collagen orientation using each of the 3 modalities (T2-mapping, MPM, and PLM) was measured in the center of the repair tissue and compared to remote, normal cartilage.

RESULTS

MRI, MPM, and PLM were able to detect a significant difference between repair and normal cartilage (n = 5). The average T2 value was longer for repair tissue (41.43 ± 9.81 ms) compared with normal cartilage (27.12 ± 14.22 ms; P = 0.04); MPM autocorrelation ellipticity was higher in fibrous tissue (3.75 ± 1.17) compared with normal cartilage (2.24 ± 0.51; P = 0.01); the average PLM score for repair tissue was lower (1.6 ± 1.02) than the score for remote normal cartilage (4.4 ± 0.42; P = 0.002). The strongest correlation among the methods was between MRI and PLM (r = -0.76; P = 0.01), followed by MPM and PLM (r = -0.58; P = 0.08), with the weakest correlation shown between MRI and MPM (r = 0.35; P = 0.31).

CONCLUSION

All 3 imaging methods quantitatively measured differences in collagen orientation between repair and normal cartilage, but at very different levels of resolution. PLM is destructive to tissue and requires euthanasia, but because MPM can be used arthroscopically, both T2-mapping and MPM can be performed in vivo, offering nondestructive means to assess collagen orientation that could be used to obtain longitudinal data in cartilage repair studies.

Micrometer scale guidance of mesenchymal stem cells to form structurally oriented cartilage extracellular matrix

Tissue engineering is a possible method for long-term repair of cartilage lesions, but current tissue-engineered cartilage constructs have inferior mechanical properties compared to native cartilage. This problem may be due to the lack of an oriented structure in the constructs at the microscale that is present in the native tissue. In this study, we utilize contact guidance to develop constructs with microscale architecture for improved chondrogenesis and function. Stable channels of varying microscale dimensions were formed in collagen-based and polydimethylsiloxane membranes via a combination of microfabrication and soft-lithography. Human mesenchymal stem cells (MSCs) were selectively seeded in these channels. The chondrogenic potential of MSCs seeded in these channels was investigated by culturing them for 3 weeks under differentiating conditions, and then evaluating the subsequent synthesized tissue for mechanical function and by type II collagen immunohistochemistry. We demonstrate selective seeding of viable MSCs within the channels. MSC aligned and produced mature collagen fibrils along the length of the channel in smaller linear channels of widths 25-100 μm compared to larger linear channels of widths 500-1000 μm. Further, substrates with microchannels that led to cell alignment also led to superior mechanical properties compared to constructs with randomly seeded cells or selectively seeded cells in larger channels. The ultimate stress and modulus of elasticity of constructs with cells seeded in smaller channels increased by as much as fourfolds. We conclude that microscale guidance is useful to produce oriented cartilage structures with improved mechanical properties. These findings can be used to fabricate large clinically useful MSC-cartilage constructs with superior mechanical properties.

Osteochondral tissue engineering: current strategies and challenges

Osteochondral defect management and repair remain a significant challenge in orthopedic surgery. Osteochondral defects contain damage to both the articular cartilage as well as the underlying subchondral bone. In order to repair an osteochondral defect the needs of the bone, cartilage and the bone-cartilage interface must be taken into account. Current clinical treatments for the repair of osteochondral defects have only been palliative, not curative. Tissue engineering has emerged as a potential alternative as it can be effectively used to regenerate bone, cartilage and the bone-cartilage interface. Several scaffold strategies, such as single phase, layered, and recently graded structures have been developed and evaluated for osteochondral defect repair. Also, as a potential cell source, tissue specific cells and progenitor cells are widely studied in cell culture models, as well with the osteochondral scaffolds in vitro and in vivo. Novel factor strategies being developed, including single factor, multi-factor, or controlled factor release in a graded fashion, not only assist bone and cartilage regeneration, but also establish osteochondral interface formation. The field of tissue engineering has made great strides, however further research needs to be carried out to make this strategy a clinical reality. In this review, we summarize current tissue engineering strategies, including scaffold design, bioreactor use, as well as cell and factor based approaches and recent developments for osteochondral defect repair. In addition, we discuss various challenges that need to be addressed in years to come.

Depth-dependent anisotropy of the micromechanical properties of the extracellular and pericellular matrices of articular cartilage evaluated via atomic force microscopy

The extracellular matrix (ECM) of articular cartilage is structurally and mechanically inhomogeneous and anisotropic, exhibiting variations in composition, collagen fiber architecture, and pericellular matrix (PCM) morphology among the different zones (superficial, middle, and deep). Joint loading exposes chondrocytes to a complex biomechanical environment, as the microscale mechanical environment of the chondrocyte depends on the relative properties of its PCM and local ECM. ECM anisotropy and chondrocyte deformation are influenced by the split-line direction, the preferred collagen fiber orientation parallel to the articular surface. While previous studies have demonstrated that cartilage macroscale properties vary with depth and the direction of loading relative to the split-line direction, the potential anisotropic behavior of the ECM and PCM at the microscale has yet to be examined. The goal of this study was to characterize the depth and directional dependence of the microscale biomechanical properties of porcine cartilage ECM and PCM in situ. Cartilage was cryosectioned to generate samples oriented parallel and perpendicular to the split-line direction and normal to the articular surface. Atomic force microscopy (AFM)-based stiffness mapping was utilized to measure ECM and PCM microscale elastic properties in all three directions within each zone. Distinct anisotropy in ECM elastic moduli was observed in the superficial and deep zones, while the middle zone exhibited subtle anisotropy. PCM elastic moduli exhibited zonal uniformity with depth and directional dependence when pooled across the zones. These findings provide new evidence for mechanical inhomogeneity and anisotropy at the microscale in articular cartilage.