Interactions of DNA with a new electron-deficient tentacle porphyrin: meso-tetrakis[2,3,5,6-tetrafluoro-4-(2-t rimethylammoniumethyl-amine)phenyl]porphy rin

Magnetic Nanoplatforms for in Situ Modification of Macromolecules: Synthesis, Characterization, and Photoinactivating Power of Cationic Nanoiman-Porphyrin Conjugates

A nanoplatform concept was developed to synthesize accessible photoactive magnetic nanoparticles (MNPs) of Fe₃O₄ coated with silica. This approach was based on the covalent binding of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (TPPF₂₀) to aminopropyl-grafted MNPs by nucleophilic aromatic substitution reaction (S_NAr) to obtain conjugate MNP-P1. After in situ modification, the remaining pentafluorophenyl groups of TPPF₂₀ attached to MNPs were substituted by dimethylaminoethoxy groups to form MNP-P2. The basic amine group of these conjugates can be protonated in aqueous media. In addition, MNP-P1 and MNP-P2 were intrinsically charged to produce cationic conjugates MNP⁺-P1 and MNP⁺-P2⁺ by methylation. All of them were easily purified by magnetic decantation in high yields. The average size of the MNPs was ∼15 nm, and the main difference between these conjugates was the greater coating with positive charges of MNP⁺-P2⁺, as shown by the zeta potential values. Absorption spectra exhibited the Soret and Q bands characteristic of TPPF₂₀ linked to MNPs. Furthermore, these conjugates showed red fluorescence emission of porphyrin with quantum yields of 0.011-0.036. The photodynamic effect sensitized by the conjugates indicated the efficient formation of singlet molecular oxygen in different media, reaching quantum yield values of 0.17-0.34 in N,N-dimethylformamide. The photodynamic activity of the conjugates was evaluated to inactivate the Gram-positive bacteria Staphylococcus aureus, the Gram-negative bacteria Escherichia coli, and the yeast Candida albicans. The modified cationic MNP⁺-P2⁺ was the most effective conjugate for photodynamic inactivation (PDI) of microorganisms. Binding of this conjugate to bacteria and photoinactivation capability was checked by means of fluorescence microscopy. Also, sustainable use by recycling was determined after three PDI treatments. Therefore, this methodology is a suitable scaffold for the in situ modification of conjugates, and in particular, MNP⁺-P2⁺ represents a useful photodynamic active material to eradicate microorganisms.

Interactions Between Spermine-Derivatized Tentacle Porphyrins and The Human Telomeric DNA G-Quadruplex

G-rich DNA sequences have the potential to fold into non-canonical G-Quadruplex (GQ) structures implicated in aging and human diseases, notably cancers. Because stabilization of GQs at telomeres and oncogene promoters may prevent cancer, there is an interest in developing small molecules that selectively target GQs. Herein, we investigate the interactions of meso-tetrakis-(4-carboxysperminephenyl)porphyrin (TCPPSpm4) and its Zn(II) derivative (ZnTCPPSpm4) with human telomeric DNA (Tel22) via UV-Vis, circular dichroism (CD), and fluorescence spectroscopies, resonance light scattering (RLS), and fluorescence resonance energy transfer (FRET) assays. UV-Vis titrations reveal binding constants of 4.7 × 10⁶ and 1.4 × 10⁷ M⁻¹ and binding stoichiometry of 2–4:1 and 10–12:1 for TCPPSpm4 and ZnTCPPSpm4, respectively. High stoichiometry is supported by the Job plot data, CD titrations, and RLS data. FRET melting indicates that TCPPSpm4 stabilizes Tel22 by 36 ± 2 °C at 7.5 eq., and that ZnTCPPSpm4 stabilizes Tel22 by 33 ± 2 °C at ~20 eq.; at least 8 eq. of ZnTCPPSpm4 are required to achieve significant stabilization of Tel22, in agreement with its high binding stoichiometry. FRET competition studies show that both porphyrins are mildly selective for human telomeric GQ vs duplex DNA. Spectroscopic studies, combined, point to end-stacking and porphyrin self-association as major binding modes. This work advances our understanding of ligand interactions with GQ DNA.

Fluorinated porphyrinoids as efficient platforms for new photonic materials, sensors, and therapeutics

Porphyrinoids are robust heterocyclic dyes studied extensively for their applications in medicine and as photonic materials because of their tunable photophysical properties, diverse means of modifying the periphery, and the ability to chelate most transition metals. Commercial applications include their use as phthalocyanine dyes in optical discs, porphyrins in photodynamic therapy, and as oxygen sensors. Most applications of these dyes require exocyclic moieties to improve solubility, target diseases, modulate photophysical properties, or direct the self-organization into architectures with desired photonic properties. The synthesis of the porphyrinoid depends on the desired application, but the de novo synthesis often involves several steps, is time consuming, and results in low isolated yields. Thus, the application of core porphyrinoid platforms that can be rapidly and efficiently modified to evaluate new molecular architectures allows researchers to focus on the design concepts rather than the synthesis methods, and opens porphyrinoid chemistry to a broader scientific community. We have focused on several widely available, commercially viable porphyrinoids as platforms: meso-perfluorophenylporphyrin, perfluorophthalocyanine, and meso-perfluorophenylcorrole. The perfluorophenylporphyrin is readily converted to the chlorin, bacteriochlorin, and isobacteriochlorin. Derivatives of all six of these core platforms can be efficiently and controllably made via mild nucleophilic aromatic substitution reactions using primary S, N, and O nucleophiles bearing a wide variety of functional groups. The remaining fluoro groups enhance the photo and oxidative stability of the dyes and can serve as spectroscopic signatures to characterize the compounds or in imaging applications using (19)F NMR. This review provides an overview of the chemistry of fluorinated porphyrinoids that are being used as a platform to create libraries of photo-active compounds for applications in medicine and materials.

Interaction of cationic phthalocyanines with DNA. Importance of the structure of the substituents

The interaction of novel zinc (II) cationic phthalocyanines with CT-DNA was studied using absorption and fluorescence spectroscopy, as well as thermal denaturation profiles. Results showed an electrostatic interaction between the phthalocyanines and CT-DNA. The properties of these phthalocyanines were compared taking the structure of the macrocycle peripheral substituents into account. 2,9(10),16(17),23(24)-tetrakis[(N-butyl-N-methylammonium)ethylsulfanyl]phthalocyaninatozinc(II) tetraiodide (Pc6) had a greater affinity for the CT-DNA helix than its bioisoster 2,9(10),16(17),23(24)-tetrakis[(N-dibutyl-N-methylammonium)ethoxy]phthalocyaninatozinc(II) tetraiodide (Pc7). 2,9(10),16(17),23(24)-tetrakis[(2-trimethylammonium)ethyl-sulfanyl]phthalocyaninatozinc(II) tetraiodide (Pc13) also carried a sulfur atom like Pc6, but linked to bulky substituents such as trimethylammonium groups. The planar aromatic region of the cationic phthalocyanines in this study appears to be unable to facilitate their intercalation with CT-DNA.

A three-layer ONIOM model for the outside binding of cationic porphyrins and nucleotide pair DNA

In this work we investigated the outside binding mode between a cationic porphyrin and a nucleotide pair of DNA, adenine-thymine and guanine-cytosine, in a supramolecular assembly. We used two structural models (semi-extended, extended) that differ in the size of porphyrin, two kinds of theoretical methods: a three layer ONIOM (B3LYP/6-31G(d)/PM3/UFF), and DFT B3LYP/6-31G(d,p), and three cationic porphyrins. ONIOM method was first tested on the semi-extended model that was calculated in four environments: gas phase, solution phase using an explicit solvent model (H(2)O), in the presence of a sodium cation (Na(+)) and in both (H(2)O + Na(+)). From interaction energy results, we found that the affinity of the cationic substituent by the adenine nucleotide is favored upon the thymine nucleotide. The extended model that considers the whole porphyrin was applied in the gas phase to the four nucleotides. All the cationic porphyrins showed affinity by the nucleotides in the order adenine > guanine > thymine > cytosine. The interaction energy values for outside binding showed a strong porphyrin-nucleotide interaction (≈-90 kcal mol(-1)), that slightly varies between the nucleotides suggesting that this kind of cationic porphyrin has a little selectivity for some of them. We also found that the effect of the nature of the cationic substituent (chain length) in the porphyrin on the outside binding is small (≈2-13 kcal mol(-1)). Coherence between the results showed that ONIOM is a useful tool to get a reasonable molecular geometry to be used as a starting point in calculations of density functional theory.

Thermodynamic investigation of manganese(III) 5-(1-(4-carboxybutyl)pyridinium-4-yl) 10,15,20-tris-(1-methylpyridinium-4-yl)porphyrin with calf thymus DNA

Binding properties of two water-soluble porphyrins, manganese(III) 5-(1-(4-carboxybutyl)pyridinium-4-yl) 10,15,20-tris(1-methylpyridinium-4-yl)porphyrin ( Mn(III)5-CBPyP ) and manganese(III) 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin ( Mn(III)TMPyP ), in the presence of various concentration of calf thymus DNA (ct-DNA), has been studied in 7.5 mM phosphate buffer, pH = 7.2 and at various temperatures by UV-vis absorption, resonance light scattering (RLS) and fluorescence spectroscopy and viscosity measurement. Optical absorption and RLS measurements have demonstrated three different species of both porphyrins form in DNA solution. The thermodynamic parameters were calculated by van't Hoff equation at various temperatures. The values of -4.89 kJ.mol-1 and +65.98 J.mol-1.K-1 for Mn(III)5-CBPyP and -14.92 kJ.mol-1 and +15.46 J mol-1.K-1 for TMPyP were estimated for enthalpy and entropy changes of interaction, respectively. The data indicate that the process is exothermic and enthalpy- and entropy-driven, suggesting that electrostatic forces play a considerable role in the interaction process. The binding of both porphyins to DNA quenches fluorescence emission of ethidium bromide (EB) and the quenching process obeys linear Stern-Volmer relationship, indicating the quenching of electron transfer of EB from its binding sites by these porphyrins. The results of using these techniques indicate the external mode of binding for both porphyrins and a higher binding affinity of Mn(III)5-CBPyP with respect to Mn(III)TMPyP .

Specific visible spectral changes induced by guanine binding to cytosine-derivatized porphyrin

The interaction of the free nucleic acid bases adenine, cytosine, and thymidine with meso-tri(4-sulfonatophenyl) meso 4-phenyl porphyrin cytosine amide (TPSC) trisodium salt at pH 5.9, 7.4, and 9.3 results is a decrease in the absorbance of the Soret (B-band) at 413 nm of TPSC. A decrease in Soret band absorbance is observed with guanine below pH 8; at higher pH values a new absorbance band at 424 nm is observed. The appearance of the band is consistent with hydrogen bonding between the cytosine-functionalized porphyrin and guanine and the resulting perturbation of the electron orbitals of the porphyrin.

Binding of nickel(II) tetrakis(dimethylpyrazolium-4-yl)porphyrin to poly(dG-dC)2 and poly(dA-dT)2

The interaction of nickel(II) complex of cationic porphyrins bearing five-membered rings, meso-tetrakis(1,2-dimethylpyrazolium-4-yl)porphyrinatonickel(II) (NiPzP) , with synthetic polynucleotides poly(dG-dC)2 and poly(dA-dT)2 has been characterized by viscometric, visible absorption, CD and MCD spectroscopic, and melting temperature measurements. The nickel(II) complex NiPzP is intercalated into poly(dG-dC)2 but outside bound to the major groove of poly(dA-dT)2. The binding constants of NiPzP to poly(dG-dC)2 and poly(dA-dT)2 are in the order of 106 M-1 and comparable to those of other reported cationic metalloporphyrins. The binding process of NiPzP to poly(dG-dC)2 and poly(dA-dT)2 is endothermic and entropically driven.

Quantitative analysis of DNA-porphyrin interactions

The binding of manganese(III)-tetra(4-N-methylpyridyl)porphyrin (MnTMpyP) with synthetic poly(dA-dT)2, poly(dI-dC)2, and poly(dG-dC)2 DNAs as well as calf thymus (CT) DNA has been quantitatively studied in detail using induced CD (circular dichroism) spectroscopy in the Soret absorption band. The CD spectra, which changed greatly depending on the porphyrin to DNA base-pair molar ratio (r), were normalized with respect to DNA concentration and deconvoluted. Three independent component binding modes (named mode 1, 2, and 3 in the order of increasing r values) were identified, which successfully simulated the observed CD spectra with negligibly small residuals for a wide range of r values. In the case of poly(dA-dT)2, poly (dI-dC)2, and CT DNA, all the three modes appeared, whereas in the case of poly(dG-dC)2 DNA, only modes 1 and 3 appeared in the r range studied. The r dependence of each binding mode, i.e., its relative affinity toward DNA, has been revealed by this analysis. Mode 1, which appeared as a single binding mode at very low r values (r < or = ca. 0.05), was inhibited by the addition of methyl green, a drug that preferentially binds to the major groove of poly (dA-dT)2 DNA. Berenil, a known minor groove binder to poly(dA-dT)2 or poly(dI-dC)2 DNA, inhibited modes 2 and 3. From these inhibition experiments as well as comparison of the component spectra for DNAs of different sequence, a binding site on DNA was proposed for each component binding mode. The number of DNA base pairs covered by a single molecule of porphyrin was estimated.

Binding of tetrakis(pyrazoliumyl)porphyrin and its copper(II) and zinc(II) complexes to poly(dG-dC)2 and poly(dA-dT)2

Interactions of cationic porphyrins bearing five-membered rings at the meso position, meso-tetrakis(1,2-dimethylpyrazolium-4-yl)porphyrin (MPzP; M is H2, Cu(II) or Zn(II)), with synthetic polynucleotides poly(dG-dC)2 and poly(dA-dT)2 have been characterized by viscometric, visible absorption, circular dichroisim and magnetic circular dichroism spectroscopic and melting temperature measurements. Both H2PzP and CuPzP are intercalated into poly(dG-dC)2 and are outside-bound to the major groove of poly(dA-dT)2, while ZnPzP is outside-bound to the minor groove of poly(dA-dT)2 and surprisingly is intercalated into poly(dG-dC)2. The binding constants of the porphyrin and poly(dG-dC)2 and poly(dA-dT)2 are on the order of 10(6) M(-1) and are comparable to those of other cationic porphyrins so far reported. The process of the binding of the porphyrin to poly(dG-dC)2 and poly(dA-dT)2 is exothermic and enthalpically driven for H2PzP, whereas it is endothermic and entropically driven for CuPzP and ZnPzP. These results have revealed that the kind of the central metal ion of metalloporphyrins influences the characteristics of the binding of the porphyrins to DNA.

Study on the interaction of new water-soluble porphyrin with DNA

A porphyrin meso-tetrakis{[4-(1-pyridyl)propoxy]phenyl}porphyrin (TPyPP) and its Ni complex (TPyPP(Ni)) have been synthesized and characterized by 1H NMR, UV-vis spectra. The interaction of two porphyrins with calf thymus-DNA (CT-DNA) has been explored by UV-vis, fluorescence and circular dichroic spectroscopy and viscosity measurements. The results suggest that these porphyrins can bind to DNA by the same binding mode. TPyPP outside binds by self-stack with DNA both at low drug load r (=[porphyrin]/[DNA]) and high drug load. Though TPyPP(Ni) has center metal nickel, binding mode with DNA has little difference compared with TPyPP, dominating out-binding mode with different direction along DNA. The binding constants of the TPyPP and TPyPP(Ni) to DNA were 4.65 x 10(5) M(-1) and 3.2 x 10(5) M(-1), respectively. A colored precipitate was found after time in two porphyrin's viscosity measurement. The reasonable interpretation is the porphyrins with alkyl connected N-position of pyridine can strongly interact with the anionic phosphates of DNA and lead to hydrophobic complex.

Intercalation of water-soluble bis-porphyrins into poly(dA)-poly(dT) double helix

The association constants (K) of nucleic acid monomers with a series of water-soluble bis-porphyrins (bisMC1, bisMC3, bisMC5, bisMC7, and bisMC11) in which two porphyrin units were linked by a methylene chain of various lengths were estimated spectrophotometrically. Among the bis-porphyrins, the K values are similar for each nucleic acid monomer, indicating that the bridging chain length does not affect the association of the bis-porphyrins with the nucleic acid monomers. The melting curves of poly(dA)-poly(dT) in the presence of bisMC3 or bisMC5 were found to be biphasic, suggesting that bisMC3 and bisMC5 are bound to poly(dA)-poly(dT) with a binding mode different from the groove binding exhibited by the corresponding porphyrin monomers. A negative-induced CD peak in the Soret region of bisMC3 and bisMC5 with poly(dA)-poly(dT) is observed and the visible spectral changes of bisMC3 and bisMC5 upon addition of poly(dA)-poly(dT) are accompanied by a large red shift of the Soret band (bisMC3: 21 nm, bisMC5: 23 nm) with substantial hypochromicity (bisMC3: 49%, bisMC5: 40%). Therefore, it is reasonable to conclude that both of the porphyrin units of bisMC3 and bisMC5 intercalate into poly(dA)-poly(dT). In contrast to poly(dA)-poly(dT), the melting curves of poly(dA.dT)(2) in the presence of the bis-porphyrins did not show such biphasic behavior. Together with the CD and visible absorption data, it is certain that these bis-porphyrins do not intercalate into poly(dA.dT)(2).

Synthesis and DNA binding of novel water-soluble cationic methylcobalt porphyrins

Organocobalt derivatives of tetracationic water-soluble porphyrins are difficult to prepare via the typical reductive alkylation of the Co(II)(por) (porH(2) = porphyrin ligand). None have been reported. The problem may arise because the porphyrin core is made relatively electron poor by the positively charged peripheral groups. We have circumvented this problem by using the [Co(III)(NH(3))(5)CH(3)](2+) reagent, which inserts the Co(III)-CH(3) moiety directly into porH(2) in water under basic conditions. The method afforded two new [CH(3)Co(por)](4+) derivatives, [CH(3)CoTMpyP(4)](4+) and [CH(3)CoTMAP](4+), where [TMpyP(4)](4+) and [TMAP](4+) are the coordinated, NH-deprotonated forms of meso-tetrakis(N-methyl-4-pyridiniumyl)porphyrin and meso-tetrakis(N,N,N-trimethylaniliniumyl)porphyrin, respectively. The binding of the two new [CH(3)Co(por)](4+) cations to DNA and to the synthetic DNA polymers [poly(dA-dT)](2) and [poly(dG-dC)](2) was studied. Using published criteria by which changes in DNA viscosity and in the visible and CD spectra in the Soret region can be used to assess DNA binding, we conclude that both are outside binders. A large hypochromicity of the Soret bands of the [CH(3)Co(por)](4+) cations observed upon outside binding to DNA may indicate a high degree of self-stacking. The visible absorption and CD spectra of the [CH(3)Co(por)](4+) cations in the presence of 1:1 mixtures of [poly(dA-dT)](2) and [poly(dG-dC)](2) are nearly identical to those with [poly(dA-dT)](2) alone and are very different from those of [poly(dG-dC)](2) alone. Thus, both cations show a high preference for outside binding at AT-rich over GC-rich DNA sites. Upon binding of each of the [CH(3)Co(por)](4+) cations to all of the DNA polymers, the Soret bands exhibit blue shifts, whereas the Soret bands of the corresponding [(H(2)O)(2)Co(por)](5+) cations exhibit red shifts. The blue shifts strongly suggest that the [CH(3)Co(por)](4+) cations, particularly [CH(3)CoTMAP](4+), become five-coordinate forms to some extent on DNA binding; this result is the first good evidence for the presence at equilibrium of five-coordinate CH(3)Co(III)(N(4)) forms in water.

Interaction of metallopyrazoliumylporphyrins with calf thymus DNA

The interaction of transition metal complexes of cationic porphyrins bearing five membered rings, meso-tetrakis(1,2-dimethylpyrazolium-4-yl)porphyrin (MPzP, M=Mn(III), Ni(II), Cu(II) or Zn(II)), with calf thymus DNA (ctDNA) has been studied. Metalloporphyrins NiPzP and CuPzP are intercalated into the 5'GC3' step of ctDNA. MnPzP is bound edge-on at the 5'TA3' step of the minor groove of ctDNA, while ZnPzP is bound face-on at the 5'TA3' step of the major groove of ctDNA. The binding constants of the metalloporphyrins to ctDNA range from 1.05x10(5) to 2.66x10(6) M(-1) and are comparable to those of other reported cationic porphyrins. The binding process of the metallopyrazoliumylporphyrins to ctDNA is endothermic and entropically driven. These results have revealed that the kind of central metal ions of metalloporphyrins influences the binding characteristics of the porphyrin to DNA.

Analytical Application of Oligopyrrole Macrocycles

Progress of modern analytical chemistry is closely related with advancement in other fields such as organic chemistry and biochemistry. Successful solution of current scientific problems is inconceivable without close cooperation of different chemical disciplines. As an example of such hot and very intricate theme research in the field of molecular recognition of biologically active compounds can serve, where numerous methods of analytical chemistry, organic chemistry and biochemistry can suitably be utilized, elaborated and brought into consonance. This multidisciplinary overlap logically leads to the advent of new scientific fields with their own tools, methodologies and subjects of exploration - bioanalytical chemistry and nanotechnology. This review covers different aspects of analytical application of oligopyrrole macrocycles (mainly porphyrins and sapphyrins). These compounds are widely used in analytical chemistry due to their outstanding optical properties. In our contribution oligopyrrole macrocycles are considered as signaling and structural parts of chemical receptors and selectors in various applications. Introduction of different moieties into meso-position of macrocyclic rings allows to obtain e.g., sterically well-organized receptors for recognition of biologically important analytes, new chromatographic materials, and powerful tools in electrochemical research. Finally, future trends in the field are outlined briefly.

DNA-drug interaction measurements using surface plasmon resonance

The interactions of the drugs 2,7-bis[(diethylamino)-ethoxy]-fluoren-9-one dihydrochloride (Tilorone), 2,7-bis[(dipropylamino)-acetamido]-fluoren-9-one dihydrochloride (FA-2), 2'-(4-hydroxyphenyl)-5-(4-methyl-1-piperazinyl)-2,5'-bi-1H-benzimidazole trihydrochloride (Hoechst 33258), and hematoporphyrin IX derivative (HPD) with synthetic self-complementary DNA (36-b.p.; 5'-biotin-spacer-[d(CGCTATATAGCG)]3-3') were studied by SPR (Surface Plasmon Resonance). Monolayers of biotinylated DNA were immobilized on a streptavidin-dextran-gold triple-layer. Small portions of the drugs (approximately 30 pmol/ml) were injected in continuous flow. The mass corresponded to the amount of the bound molecules. Injections of 50 mM sodium hydroxide pulses separated the DNA double strands, releasing the effector molecules. Subsequent treatments with the effectors gave reproducible results. The maximum interaction between drug and DNA was observed in the case of Tilorone. 41 molecules could bind to the 36-b.p. DNA duplex. To investigate the microscopic behavior in condensed nucleic acid phases, SFM (Scanning Force Microscopy)-imaging and polarizing microscopic observations of DNA-effector complexes were carried out. Supplementary UV-absorption thermal denaturation curves of DNA with the above-mentioned effectors in dilute solutions were measured. As an additional aid to understand the geometries of DNA-drug interactions, computer simulations were performed and compared with the experimental data.