Recombinant production and purification of novel antisense antimicrobial peptide in Escherichia coli

The future of recombinant host defense peptides

The antimicrobial resistance crisis calls for the discovery and production of new antimicrobials. Host defense peptides (HDPs) are small proteins with potent antibacterial and immunomodulatory activities that are attractive for translational applications, with several already under clinical trials. Traditionally, antimicrobial peptides have been produced by chemical synthesis, which is expensive and requires the use of toxic reagents, hindering the large-scale development of HDPs. Alternatively, HDPs can be produced recombinantly to overcome these limitations. Their antimicrobial nature, however, can make them toxic to the hosts of recombinant production. In this review we explore the different strategies that are used to fine-tune their activities, bioengineer them, and optimize the recombinant production of HDPs in various cell factories.

Peptide based antimicrobials: Design strategies and therapeutic potential

Therapeutic activity of antibiotics is noteworthy, as they are used in the treatment of microbial infections. Regardless of their utility, there has been a steep decrease in the number of drug candidates due to antibiotic resistance, an inevitable consequence of noncompliance with the full therapeutic regimen. A variety of resistant species like MDR (Multi-Drug Resistant), XDR (Extensively Drug-Resistant) and PDR (Pan Drug-Resistant) species have evolved, but discovery pipeline has already shown signs of getting dried up. Therefore, the need for newer antibiotics is of utmost priority to combat the microbial infections of future times. Peptides have some interesting features like minimal side effect, high tolerability and selectivity towards specific targets, which would help them successfully comply with the stringent safety standards set for clinical trials. In this review, we attempt to present the state of the art in the discovery of peptide-based antimicrobials from a design perspective.

Fusion proteins towards fungi and bacteria in plant protection

In agriculture, although fungi are considered the foremost problem, infections by bacteria also cause significant economical losses. The presence of different diseases in crops often leads to a misuse of the proper therapeutic, or the combination of different diseases forces the use of more than one pesticide. This work concerns the development of a 'super-Blad': a chimeric protein consisting of Blad polypeptide, the active ingredient of a biological fungicide already on the market, and two selected peptides, SP10-5 and Sub5, proven to possess biological potential as antibacterial agents. The resulting chimeric protein obtained from the fusion of Blad with SP10-5 not only maintained strong antibacterial activity, especially against Xanthomonas spp. and Pseudomonas syringae, but was also able to retain the ability to inhibit the growth of both yeast and filamentous fungi. However, the antibacterial activity of Sub5 was considerably diminished when fused with Blad, which seems to indicate that not all fusion proteins behave equally. These newly designed drugs can be considered promising compounds for use in plant protection. A deeper and focused development of an appropriate formulation may result in a potent biopesticide that can replace, per se, two conventional chemistries with less impact on the environment.

Membrane Active Antimicrobial Peptides: Translating Mechanistic Insights to Design

Antimicrobial peptides (AMPs) are promising next generation antibiotics that hold great potential for combating bacterial resistance. AMPs can be both bacteriostatic and bactericidal, induce rapid killing and display a lower propensity to develop resistance than do conventional antibiotics. Despite significant progress in the past 30 years, no peptide antibiotic has reached the clinic yet. Poor understanding of the action mechanisms and lack of rational design principles have been the two major obstacles that have slowed progress. Technological developments are now enabling multidisciplinary approaches including molecular dynamics simulations combined with biophysics and microbiology toward providing valuable insights into the interactions of AMPs with membranes at atomic level. This has led to increasingly robust models of the mechanisms of action of AMPs and has begun to contribute meaningfully toward the discovery of new AMPs. This review discusses the detailed action mechanisms that have been put forward, with detailed atomistic insights into how the AMPs interact with bacterial membranes. The review further discusses how this knowledge is exploited toward developing design principles for novel AMPs. Finally, the current status, associated challenges, and future directions for the development of AMP therapeutics are discussed.

Aggregating tags for column-free protein purification

Protein purification remains a central need for biotechnology. In recent years, a class of aggregating tags has emerged, which offers a quick, cost-effective and column-free alternative for producing recombinant proteins (and also peptides) with yield and purity comparable to that of the popular His-tag. These column-free tags induce the formation of aggregates (during or after expression) when fused to a target protein or peptide, and upon separation from soluble impurities, the target protein or peptide is subsequently released via a cleavage site. In this review, we categorize these tags as follows: (i) tags that induce inactive protein aggregates in vivo; (ii) tags that induce active protein aggregates in vivo; and (iii) tags that induce soluble expression in vivo, but aggregates in vitro. The respective advantages and disadvantages of these tags are discussed, and compared to the three conventional tags (His-tag, maltose-binding protein [MBP] tag, and intein-mediated purification with a chitin-binding tag [IMPACT-CN]). While this new class of aggregating tags is promising, more systematic tests are required to further the use. It is conceivable, however, that the combination of these tags and the more traditional columns may significantly reduce the costs for resins and columns, particularly for the industrial scale.

Recombinant expression of novel protegrin-1 dimer and LL-37-linker-histatin-5 hybrid peptide mediated biotin carboxyl carrier protein fusion partner

Antimicrobial peptides (AMPs) hold great promise as potential therapeutic approach for curing of infectious diseases. Prokaryotic protein expression renders high scalability with an effective purification of several heterogeneous proteins. However, it might be inappropriate for recombinant AMPs expression thereby its antimicrobial activity against the host cells. Several fusion partners demonstrated antimicrobial activity neutralization of AMPs expression and purification in Escherichia coli. In order to improve the antimicrobial effect, several hybrid AMPs have been designed and developed. As expected to increase the antimicrobial activity, a dimeric form of porcine protegrin-1 (PG-1) and human LL-37-linker-histatin-5 (LL-37-linker-Hst-5) hybrid peptide were alternatively constructed in this study. Hydroxylamine hydrochloride and thrombin cleavage sites were designed for releasing of hybrid peptide and PG-1 dimer from biotin carboxyl carrier protein (BCCP) fusion partner. The full-length AMPs gene was connected down-stream of BCCP gene using the overlap extension-PCR, cloned into pET-28a vector and expressed in E. coli BL21(DE3)pLysS. After IPTG induction, approximately 20% of BCCP-AMPs was expressed as intracytoplasmic inclusion bodies with an expected molecular weight of 24.5kDa. The mean of purified and refolded BCCP-AMPs was 1.5mg/L with 76% purity. The presence of expressed protein was subsequently determined by Western blotting analysis. Finally, radial diffusion assay supported that these peptides displayed functional antimicrobial activity against E. coli and Staphylococcus aureus standard strains. Two novel AMPs established in this study would be potentially developed as extensive intervention for treating of infectious diseases.

Establishing the yeast Kluyveromyces lactis as an expression host for production of the saposin-like domain of the aspartic protease cirsin

Typical plant aspartic protease zymogens comprise a characteristic and plant-specific insert (PSI). PSI domains can interact with membranes, and a role as a defensive weapon against pathogens has been proposed. However, the potential of PSIs as antimicrobial agents has not been fully investigated and explored yet due to problems in producing sufficient amounts of these domains in bacteria. Here, we report the development of an expression platform for the production of the PSI domain of cirsin in the generally regarded as safe (GRAS) yeast Kluyveromyces lactis. We successfully generated K. lactis transformants expressing and secreting significant amounts of correctly processed and glycosylated PSI, as well as its nonglycosylated mutant. A purification protocol with protein yields of ∼4.0 mg/liter was established for both wild-type and nonglycosylated PSIs, which represents the highest reported yield for a nontagged PSI domain. Subsequent bioactivity assays targeting phytopathogenic fungi indicated that the PSI of cirsin is produced in a biologically active form in K. lactis and provided clear evidence for its antifungal activity. This yeast expression system thereby emerges as a promising production platform for further exploring the biotechnological potential of these plant saposin-like proteins.

Biotic stress resistance in agriculture through antimicrobial peptides

Antimicrobial peptides (AMPs) are the hosts' defense molecules against microbial pathogens and gaining extensive research attention worldwide. These have been reported to play vital role of host innate immunity in response to microbial challenges. AMPs can be used as a natural antibiotic as an alternative of their chemical counterpart for protection of plants/animals against diseases. There are a number of sources of AMPs including prokaryotic and eukaryotic organisms and are present, both in vertebrates and invertebrates. AMPs can be classified as cationic or anionic, based on net charges. Large number of databases and tools are available in the public domain which can be used for development of new genetically modified disease resistant varieties/breeds for agricultural production. The results of the biotechnological research as well as genetic engineering related to AMPs have shown high potential for reduction of economic losses of agricultural produce due to pathogens. In this article, an attempt has been made to introduce the role of AMPs in relation to plants and animals. Their functional and structural characteristics have been described in terms of its role in agriculture. Different sources of AMPs and importance of these sources has been reviewed in terms of its availability. This article also reviews the bioinformatics resources including different database tools and algorithms available in public domain. References of promising biotechnology research in relation to AMPs, prospects of AMPs for further development of genetically modified varieties/breeds are highlighted. AMPs are valuable resource for students, researchers, educators and medical and industrial personnel.

Production of recombinant peptides as fusions with SUMO

Recombinant production of non-native peptides requires using protein fusion technology to prevent peptide degradation by host-cell proteases. In this work, we have used SUMO protein as a fusion partner for the production of difficult-to-express, antimicrobial, self-assembling and amyloidogenic peptides using Escherichia coli. SUMO-peptide fusions were expressed as intracellular products by utilizing pET based expression vectors constructed by Life Sensors Inc., USA. Histidine tagged SUMO-peptide fusions were purified using Ni-NTA affinity chromatography. Complete (100%) cleavage of the SUMO-peptide fusion was achieved using SUMO protease-1. Our findings demonstrate that SUMO fusion technology is a promising alternative for production of peptides in E. coli. The key advantage of this technology is that the enzymatic activity of SUMO protease-1 is specific and efficient leading to inexpensive costs for cleaving the peptide fusion when compared with other fusion systems.

Cost-effective expression and purification of antimicrobial and host defense peptides in Escherichia coli

Cationic antimicrobial host defense peptides (HDPs) combat infection by directly killing a wide variety of microbes, and/or modulating host immunity. HDPs have great therapeutic potential against antibiotic-resistant bacteria, viruses and even parasites, but there are substantial roadblocks to their therapeutic application. High manufacturing costs associated with amino acid precursors have limited the delivery of inexpensive therapeutics through industrial-scale chemical synthesis. Conversely, the production of peptides in bacteria by recombinant DNA technology has been impeded by the antimicrobial activity of these peptides and their susceptibility to proteolytic degradation, while subsequent purification of recombinant peptides often requires multiple steps and has not been cost-effective. Here we have developed methodologies appropriate for large-scale industrial production of HDPs; in particular, we describe (i) a method, using fusions to SUMO, for producing high yields of intact recombinant HDPs in bacteria without significant toxicity and (ii) a simplified 2-step purification method appropriate for industrial use. We have used this method to produce seven HDPs to date (IDR1, MX226, LL37, CRAMP, HHC-10, E5 and E6). Using this technology, pilot-scale fermentation (10L) was performed to produce large quantities of biologically active cationic peptides. Together, these data indicate that this new method represents a cost-effective means to enable commercial enterprises to produce HDPs in large-scale under Good Laboratory Manufacturing Practice (GMP) conditions for therapeutic application in humans.

Recombinant antimicrobial peptide hPAB-β expressed in Pichia pastoris, a potential agent active against methicillin-resistant Staphylococcus aureus

As a potential therapeutic agent, antimicrobial peptide has received increased attention in recent years. However, high-level expression of a small peptide with antimicrobial activity is still a challenging task. In this study, the coding sequence of antimicrobial peptide hPAB-β, a variant derived from human beta-defensin 2, was cloned into pPIC9K vector and transformed into Pichia pastoris. P. pastoris transformants harbored with multi-copy plasmids were screened by G418 selection. When the transformed cells were induced by methanol, sodium dodecyl sulfate-polyacrylamide gel electrophoresis, Western blot, and matrix-assisted laser desorption ionization-time of flight mass spectrometry revealed recombinant hPAB-β products consisting of three protein species of 4,680.4, 4,485.3, and 4,881.9 Da at proportions of 58%, 36%, and 6%, respectively, which may be due to the incomplete processing of the fusion signal peptide of α-factor by the STE13 protease. Expressed hPAB-β was secreted into the culture medium at a level of 241.2 ± 29.5 mg/L. Purified hPAB-β with 95% homogeneity was obtained by 10 kDa membrane filtration followed by cation ion-exchange chromatography with a SP-Sepharose XL column. The two major protein species separated through a SOURCE 30RPC reverse phase chromatography column showed definite antimicrobial activities against Staphylococcus aureus. All 22 methicillin-resistant S. aureus (MRSA) isolates with multidrug resistance phenotype were sensitive to the recombinant hPAB-β with minimal inhibitory concentrations of 8-64 μg/ml. Our results show that the methylotrophic yeast-inducible system is suitable for high-level expression of active hPAB-β, and that expressed hPAB-β in P. pastoris may be a potential antimicrobial agent against MRSA infection.

Powerful workhorses for antimicrobial peptide expression and characterization

Discovery of antimicrobial peptides (AMP) is to a large extent based on screening of fractions of natural samples in bacterial growth inhibition assays. However, the use of bacteria is not limited to screening for antimicrobial substances. In later steps, bioengineered "bugs" can be applied to both production and characterization of AMPs. Here we describe the idea to use genetically modified Escherichia coli strains for both these purposes. This approach allowed us to investigate SpStrongylocins 1 and 2 from the purple sea urchin Strongylocentrotus purpuratus only based on sequence information from a cDNA library and without previous direct isolation or chemical synthesis of these peptides. The recombinant peptides are proved active against all bacterial strains tested. An assay based on a recombinant E. coli sensor strain expressing insect luciferase, revealed that SpStrongylocins are not interfering with membrane integrity and are therefore likely to have intracellular targets.

Two recombinant peptides, SpStrongylocins 1 and 2, from Strongylocentrotus purpuratus, show antimicrobial activity against Gram-positive and Gram-negative bacteria

The cysteine-rich strongylocins were the first antimicrobial peptides (AMPs) discovered from the sea urchin species, Strongylocentrotus droebachiensis. Homologous putative proteins (called SpStrongylocin) were found in the sister species, S. purpuratus. To demonstrate that they exhibit the same antibacterial activity as strongylocins, cDNAs encoding the 'mature' peptides (SpStrongylocins 1 and 2) were cloned into a direct expression system fusing a protease cleavage site and two purification tags to the recombinant peptide. Both recombinant fusion peptides were expressed in a soluble form in an Escherichia coli strain tolerant to toxic proteins. Enterokinase was used to remove the fusion tags and purified recombinant SpStrongylocins 1 and 2 showed antimicrobial activity against both Gram-negative and Gram-positive bacteria. The results of membrane integrity assays against cytoplasmic membranes of E. coli suggest that both recombinant SpStrongylocins 1 and 2 conduct their antibacterial activity by intracellular killing mechanisms because no increase in membrane permeability was detected.

Production of recombinant antimicrobial peptides in bacteria

Large quantities of antimicrobial peptides are required for investigations and clinical trials, therefore suitable production method alternative to traditional chemical synthesis is necessary. Production of recombinant antimicrobial peptides in prokaryotic systems has successfully demonstrated the viability of this approach. Production of antimicrobial peptides in Escherichia coli is potentially limited due to their toxicity to host cells and susceptibility to proteolytic degradation, which can be avoided using fusion protein approach. We describe antimicrobial peptide production in E. coli based on forcing antimicrobial peptides into inclusion bodies, which is affective for the production of large quantities of antimicrobial peptides. Chemical reagents for cleaving peptide bond between antimicrobial peptides and fusion proteins such as cyanogen bromide and diluted acid are selective and provide antimicrobial peptides for biological studies in short time.

The chromatography-free release, isolation and purification of recombinant peptide for fibril self-assembly

One of the major expenses associated with recombinant peptide production is the use of chromatography in the isolation and purification stages of a bioprocess. Here we report a chromatography-free isolation and purification process for recombinant peptide expressed in Escherichia coli (E. coli). Initial peptide release is by homogenization and then by enzymatic cleavage of the peptide-containing fusion protein, directly in the E. coli homogenate. Release is followed by selective solvent precipitation (SSP) to isolate and purify the peptide away from larger cell contaminants. Specifically, we expressed in E. coli the self-assembling beta-sheet forming peptide P(11)-2 in fusion to thioredoxin. Homogenate was heat treated (55 degrees C, 15 min) and then incubated with tobacco etch virus protease (TEVp) to release P(11)-2 having a native N-terminus. SSP with ethanol at room temperature then removed contaminating proteins in an integrated isolation-purification step; it proved necessary to add 250 mM NaCl to homogenate to prevent P(11)-2 from partitioning to the precipitate. This process structure gave recombinant P(11)-2 peptide at 97% polypeptide purity and 40% overall yield, without a single chromatography step. Following buffer-exchange of the 97% pure product by bind-elute chromatography into defined chemical conditions, the resulting peptide was shown to be functionally active and able to form self-assembled fibrils. To the best of our knowledge, this manuscript reports the first published process for chromatography-free recombinant peptide release, isolation and purification. The process proved able to deliver functional recombinant peptide at high purity and potentially low cost, opening cost-sensitive materials applications for peptide-based materials.

Tandem multimer expression of angiotensin I-converting enzyme inhibitory peptide in Escherichia coli

It is common for small tandem peptide multimer genes to be indirectly inserted into expression vectors and fused with a protein tag. In this study, a multimer of the tandem angiotensin I-converting enzyme inhibitory peptide (ACE-IP) gene was directly transferred to a commercially available vector and the designed gene was expressed as a repeated peptide in Escherichia coli BL21(DE3)pLysS. The process further developed in our study was the construction of six-repeated ACE-IP synthetic genes and their direct insertion. Protein expression in inclusion bodies was confirmed by SDS-PAGE and Western blot. Acid hydrolysis of inclusion bodies produced single-unit peptides through cleavage of the aspartyl-prolyl bonds. This cleaved recombinant peptide (rACE-IP) was purified using immuno-affinity chromatography followed by reversed phase-HPLC. 105-115 mg of the lyophilized recombinant peptide was obtained from 1 L E. coli culture. In vitro biological activity of rACE-IP was indistinguishable from that of the natural peptide produced by hydrolysis in artificial gastric juice or by acidic hydrolysis. The rACE-IP prepared by recombinant DNA technology and solid-phase synthesis methods showed a similar IC(50). This strategy could be used for the expression of important peptides, which have N-terminal proline (P) and C-terminal aspartic acid residues (D) for commercial applications, e.g. functional foods and drinks.

Expression, purification and structural studies of a short antimicrobial peptide

We have produced a small antimicrobial peptide PFWRIRIRR in bacteria utilizing production in the form of insoluble fusion protein with ketosteroid isomerase. The recombinant peptide was rapidly and efficiently isolated by acidic cleavage of the fusion protein based on the acid labile Asp-Pro bond at the N-terminus of the peptide. The peptide has antibacterial activity and neutralizes macrophage activation by LPS. The selectivity of the peptide against bacteria correlates with preferential binding to acidic phospholipid vesicles. Solution structure of the peptide in SDS and DPC micelles was determined by NMR. The peptide adopts a well-defined structure, comprising a short helical segment. Cationic and hydrophobic clusters are segregated along the molecular axis of the short helix, which is positioned perpendicular to the membrane plane. The position of the helix is shifted in two micellar types and more nonpolar surface is exposed in anionic micelles. Overall structure explains the advantageous role of the N-terminal proline residue, which forms an integral part of the hydrophobic cluster.

Molecular insight into mechanism of antimicrobial action of the beta-hairpin peptide arenicin: specific oligomerization in detergent micelles

Arenicins are 21-residue cationic antimicrobial peptides isolated from marine polychaeta Arenicola marina. The peptides exhibit potent broad-spectrum antimicrobial activity. In water solution arenicin-2 adopts a beta-hairpin conformation, stabilized by one disulfide and nine hydrogen bonds. To determine the propensity for the peptide oligomerization in membrane mimetic systems, the recombinant arenicin-2 was overexpressed as a fused form in Escherichia coli. The arenicin-2 oligomerization and intermolecular packing in membrane mimicking environment were investigated using high-resolution NMR spectroscopy. The present studies show that arenicin-2 preserves a beta-hairpin structure and forms asymmetric dimers upon incorporation into the dodecylphosphocholine micelle. Two monomers of arenicin-2 are aligned parallel to each other by the N-terminal strands of the beta-hairpin (CN upward arrow upward arrowNC type of association). Polyacrylamide gel electrophoresis analysis indicated that in environment of anionic SDS micelles the arenicin-2 might undergo further oligomerization and form tetramers. Our results afford further molecular insight into possible mechanism of antimicrobial action of arenicins.

The acidity of protein fusion partners predominantly determines the efficacy to improve the solubility of the target proteins expressed in Escherichia coli

Maximization of the soluble protein expression in Escherichia coli (E. coli) via the fusion expression strategy is usually preferred for academic, industrial and pharmaceutical purposes. In this study, a set of distinct protein fusion partners were comparatively evaluated to promote the soluble expression of two target proteins including the bovine enterokinase largely prone to aggregation and the green fluorescent protein with moderate native solubility. Within protein attributes that are putatively involved in protein solubility, the protein acidity was of particular concern. Our results explicitly indicated the protein fusion partners with a stronger acidity remarkably exhibited a higher capacity to enhance the solubility of the target proteins. Among them, msyB, an E. coli acidic protein that suppresses the mutants lacking function of protein export, was revealed as an excellent protein fusion partner with the distinguished features including high potential to enhance protein solubility, efficient expression, relatively small size and the origin of E. coli itself. In principle, our results confirmed the modified solubility model of Wilkinson-Harrison and especially deepened understanding its essence. Meanwhile, the roles of other parameters such as protein hydrophilicity in solubility enhancement were discussed, a guideline to design or search an optimum protein solubility enhancer was also proposed.

Antimicrobial peptides: an overview of a promising class of therapeutics

Antibiotic resistance is increasing at a rate that far exceeds the pace of new development of drugs. Antimicrobial peptides, both synthetic and from natural sources, have raised interest as pathogens become resistant against conventional antibiotics. Indeed, one of the major strengths of this class of molecules is their ability to kill multidrug-resistant bacteria. Antimicrobial peptides are relatively small (6 to 100 aminoacids), amphipathic molecules of variable length, sequence and structure with activity against a wide range of microorganisms including bacteria, protozoa, yeast, fungi, viruses and even tumor cells. They usually act through relatively non-specific mechanisms resulting in membranolytic activity but they can also stimulate the innate immune response. Several peptides have already entered pre-clinical and clinical trials for the treatment of catheter site infections, cystic fibrosis, acne, wound healing and patients undergoing stem cell transplantation. We review the advantages of these molecules in clinical applications, their disadvantages including their low in vivo stability, high costs of production and the strategies for their discovery and optimization.

Soluble expression, purification and functional identification of a disulfide-rich conotoxin derived from Conus litteratus

Conotoxins are a diverse array of small peptides mostly with multiple disulfide bridges. These peptides become an increasing significant source of neuro-pharmacological probes and drugs as a result of the high selectivity for ion channels and receptors. Usually, the analogue of natural conotoxins is produced by means of chemical synthesis. Here, we present a simple and fast strategy of producing disulfide-rich conotoxins via recombinant expression. By fused with thioredoxin and His tag, a novel O-superfamily conotoxin lt7a was successfully expressed in Escherichia coli and purified, resulting in a high yield of recombinant lt7a about 6 mg/l. The purity of target protein is up to 95% as identified by HPLC results. Whole cell patch-clamp recording revealed that the new conotoxin blocked voltage-sensitive sodium channels in rat dorsal root ganglion neurons, indicating it might be a novel microO-conotoxin.

Expression and purification of recombinant human alpha-defensins in Escherichia coli

Different strategies have been developed to produce small antimicrobial peptides (AMPs) using recombinant techniques. Up to now, all efforts to obtain larger quantities of active recombinant human alpha-defensins have been only moderately successful. Here we report an effective method of biosynthesis of human alpha-defensins (hNP-1 to hNP-3 and hD-5 and hD-6) in the Escherichia coli. All the peptides, expressed as insoluble fusions with the peptide encoded by a portion of E. coli tryptophan operon (trp DeltaLE 1413 polypeptide), were isolated from the inclusion bodies by immobilized metal affinity chromatography (IMAC) and separated from the fusion leader by chemical cleavage. Fully reduced peptides that were purified according to a straightforward protocol were subsequently folded, oxidized, and subjected to functional and structural analyses. With the exception of hD-6, all recombinant alpha-defensins exhibit expected anti-E. coli activity, as measured by the colony counting method. The method described in this report is a low-cost, efficient way of generating alpha-defensins in quantities ranging from milligrams to grams.

Facilitation of expression and purification of an antimicrobial peptide by fusion with baculoviral polyhedrin in Escherichia coli

Several fusion strategies have been developed for the expression and purification of small antimicrobial peptides (AMPs) in recombinant bacterial expression systems. However, some of these efforts have been limited by product toxicity to host cells, product proteolysis, low expression levels, poor recovery yields, and sometimes an absence of posttranslational modifications required for biological activity. For the present work, we investigated the use of the baculoviral polyhedrin (Polh) protein as a novel fusion partner for the production of a model AMP (halocidin 18-amino-acid subunit; Hal18) in Escherichia coli. The useful solubility properties of Polh as a fusion partner facilitated the expression of the Polh-Hal18 fusion protein ( approximately 33.6 kDa) by forming insoluble inclusion bodies in E. coli which could easily be purified by inclusion body isolation and affinity purification using the fused hexahistidine tag. The recombinant Hal18 AMP ( approximately 2 kDa) could then be cleaved with hydroxylamine from the fusion protein and easily recovered by simple dialysis and centrifugation. This was facilitated by the fact that Polh was soluble during the alkaline cleavage reaction but became insoluble during dialysis at a neutral pH. Reverse-phase high-performance liquid chromatography was used to further purify the separated recombinant Hal18, giving a final yield of 30% with >90% purity. Importantly, recombinant and synthetic Hal18 peptides showed nearly identical antimicrobial activities against E. coli and Staphylococcus aureus, which were used as representative gram-negative and gram-positive bacteria, respectively. These results demonstrate that baculoviral Polh can provide an efficient and facile platform for the production or functional study of target AMPs.

Recombinant expression of indolicidin concatamers in Escherichia coli

Antimicrobial peptides are part of the innate immune system of vertebrates and invertebrates. They are active against gram-negative and gram-positive bacteria, fungi, and protozoa. Currently, most antimicrobial peptides are extracted from host organisms or produced by solid-phase peptide synthesis. Recombinant protein expression in Escherichia coli is a tool for greater production yields at a decreased cost and reduces the use of hazardous materials. We have constructed a concatamer of indolicidin and successfully expressed a fusion product with thioredoxin in E. coli BL21DE3. Codons for methionine residues flanking individual indolicidin genes were incorporated for cyanogen bromide cleavage of the fusion protein and liberation of active monomeric indolicidin. Peptide yields of 150 microg/l monomeric indolicidin were achieved in this first report of recombinant production of indolicidin with demonstrated antimicrobial activity.

Design and expression of peptide antibiotic hPAB-beta as tandem multimers in Escherichia coli

Peptide antibiotics are small peptides encoded by organism genomic DNA. They are recognized to play important roles in the innate host defense of most living organisms. The growing resistance of bacteria to conventional antibiotics and the need for discovery of new antibiotics have stimulated great interest in the development of peptide antibiotics as human therapeutics. However, preparation of peptide antibiotics at a large scale is a great challenge in developing these commercial products. In this study, tandem repeat multimers of peptide antibiotic hPAB-beta were designed and the recombinant plasmids containing one to eight copies of hPAB-beta gene were generated. Eight genetic engineered bacteria harboring pQE-hPAB-beta1-8 recombinant were able to express the repetitive hPAB-beta multimers of interest in inclusion bodies, respectively. The expressed proteins could reach 2.6-28% of the total proteins. The hPAB-beta trimer construct was selected out for the subsequent study based on its higher expression level (27.8%), which yields in wet cell weights (3.15+/-0.45 g/l) and the fusion protein inclusion bodies was able to completely dissolve in 8 M urea. The tandem trimers could easily be captured by Ni-NTA affinity chromatography and cleaved into monomers by hydroxylamine. Then, the monomer hPAB-beta of interest was purified to 95% homogeneity by reverse phase chromatography and gel filtration. The final yield of purified recombinant monomer hPAB-beta was 680+/-12 mg/100 g wet cells. The minimum inhibitory concentrations (MICs) of the purified recombinant hPAB-beta against type or clinical strains of microorganisms were about 31-250 microg/ml and these results showed that the recombinant hPAB-beta could retain its bioactivity.

Efficient production of a soluble fusion protein containing human beta-defensin-2 in E. coli cell-free system

Human beta-defensin-2 (hBD2), a small cationic peptide, exhibits a broad range of antimicrobial activity and does not cause microbial resistance. In order to produce hBD2 efficiently, an Escherichia coli cell-free biosynthesis system has been developed as an alternative method. A specific plasmid pIVEX2.4c-trxA-shBD2 was constructed for the cell-free expression of fusion protein (hBD2 linked with His-Tag and Trx-Tag). This allowed enhancement of protein stability and facilitated downstream purification process. Significant amount of target fusion protein was synthesized in the batch-mode bioreactor by optimizing the reaction conditions. About five-fold improvement of productivity (ca. 2.0 mg/ml soluble fusion protein) could be achieved by using a continuous exchange cell-free (CECF) system compared to batch system. One-step affinity chromatographic process was developed to recover high purity fusion protein (95.2%) with overall recovery ratio of about 50%. The fusion protein was cleaved by cyanogens bromide (CNBr), and the mature hBD2 had demonstrated strong inhibition on the growth of E. coli D31 at low concentration.

Expression of bioactive recombinant GSLL-39, a variant of human antimicrobial peptide LL-37, in Escherichia coli

The human cationic antimicrobial peptide hCAP-18/LL-37 is the unique cathelicidin identified in human to date. It has broad spectrum of antimicrobial activities and LPS-neutralizing activity and is involved in angiogenesis. Both purified and synthetic LL-37 or its derivatives were used in the study on LL-37. However, production of LL-37 in Escherichia coli has not been established. In this study, its precursor instead of the mature peptide was adopted for expression to avoid the lethal effect of recombinant LL-37 on host cells. A thrombin recognition site was introduced between the cathelin-like domain and LL-37 domain by overlap PCR to construct fragment encoding modified precursor (mhCAP-18) to facilitate the final release of the recombinant peptide. Then mhCAP-18 was fused in-frame to thioredoxin gene under the control of inducible T7 promoter to construct expression vector pET-mhCAP-18. The soluble form fusion protein was expressed in E. coli and purified by Chelating Sepharose column chromatography. Thrombin digestion of the fusion protein yielded recombinant GSLL-39, which was then purified by cation-exchange chromatography. Recombinant GSLL-39, which has two extra residues on its N-terminus when compared with its native counterpart, showed similar antimicrobial activities against both Gram-negative and Gram-positive bacteria.

A novel carrier molecule for high-level expression of peptide antibiotics in Escherichia coli

Peptide antibiotics are often hard to express in engineered bacteria at high level. According to the properties of peptide antibiotics, a heterologous protein PaP3.30, encoded by ORF30 of Pseudomonas aeruginosa bacteriophage PaP3, was selected as a carrier molecule. The gene of the carrier molecule was constructed into the plasmid pQE-32 to give rise to the vector pQE-PaP30 for expression of peptide antibiotics in Escherichia coli. A his-tagged fusion protein was genetically constructed with a peptide antibiotic at its carboxy terminus. The novel carrier molecule was used for high-level expression of six peptide antibiotics with different sizes and isoelectric points in E. coli, which are hPAB-beta, MSI-78, Melletin, hBD-1, Cecropin A, and an ovine anion peptide. And further, one of six peptide antibiotics, hPAB-beta (an analog of a human peptide antibiotic), was taken as an example for studies of recovery of interesting products from the fusion partner, purification and antimicrobial activity evaluation. The results indicated that the expressed fusion protein existed as an inclusion body in the cytoplasm and the expression amounts of six peptide antibiotic fusions are all higher than 34% of the total cell protein. The expression products could be easily purified by Ni-NTA chromatography. Cyanogen bromide was used to cut at the methionine linker between the carrier and hPAB-beta peptide. hPAB-beta was recovered from the fusion partner and purified to homogeneity with High S cation-exchange and Bio-gel P6 gel chromatography. The bactericidal activities of the purified recombinant hPAB-beta against P. aeruginosa are 31-64 microg/ml, and against Staphylococcus aureus are > or = 128 microg/ml, being comparable to that of the chemical synthesis peptide. These results show that the carrier molecule can result in high-level expression of peptide antibiotics, and expression products can be easily recovered from their fusion partner and retain their bioactivity.

Bioprocess-centered molecular design (BMD) for the efficient production of an interfacially active peptide

The efficient expression and purification of an interfacially active peptide (mLac21) was achieved by using bioprocess-centered molecular design (BMD), wherein key bioprocess considerations are addressed during the initial molecular biology work. The 21 amino acid mLac21 peptide sequence is derived from the lac repressor protein and is shown to have high affinity for the oil-water interface, causing a substantial reduction in interfacial tension following adsorption. The DNA coding for the peptide sequence was cloned into a modified pET-31(b) vector to permit the expression of mLac21 as a fusion to ketosteroid isomerase (KSI). Rational iterative molecular design, taking into account the need for a scaleable bioprocess flowsheet, led to a simple and efficient bioprocess yielding mLac21 at 86% purity following ion exchange chromatography (and >98% following chromatographic polishing). This case study demonstrates that it is possible to produce acceptably pure peptide for potential commodity applications using common scaleable bioprocess unit operations. Moreover, it is shown that BMD is a powerful strategy that can be deployed to reduce bioseparation complexity.

Radiopharmaceuticals: new antimicrobial agents

Small antimicrobial peptides are good candidates for new antimicrobial agents. A scintigraphic approach to studying the pharmacokinetics of antimicrobial peptides in animals has been developed. The peptides were safely and reproducibly labelled with technetium-99m and, after intravenous injection of the radiolabelled peptides into infected animals, scintigraphy allowed real-time quantification of the peptide in the various body compartments. Antimicrobial peptides rapidly accumulated at sites of infection but not at sites of sterile inflammation, indicating that radiolabelled antimicrobial peptides could be used in detection of infection. These radiopharmaceuticals enabled the efficacy of antibacterial therapy in animals to be monitored. The scintigraphic approach provides a useful method for investigating the pharmacokinetics of small peptides in animals.

Cell-free production of biologically active polypeptides: application to the synthesis of antibacterial peptide cecropin

An approach to preparative production of polypeptides, including uneasily testable, degradable, and toxic ones, is proposed on the basis of in vitro expression systems of last generation, such as continuous-exchange cell-free and continuous-flow cell-free transcription-translation systems. The approach implies that a polypeptide of interest is synthesized as a fusion protein with the polypeptide linked to green fluorescent protein (GFP) through a cleavable spacer. The GFP moiety provides direct visualization and quantitative monitoring of the polypeptide synthesis, as well as solubility and stability of the product. The synthesis of functionally active antibacterial polypeptide cecropin P1 (31 amino acid residues) has been demonstrated.

High-level expression of antimicrobial peptide mediated by a fusion partner reinforcing formation of inclusion bodies

A gene expression system for antimicrobial peptides, which could be effectively used for various studies or applications of the antimicrobial peptides, has been developed. To avoid the harmful effects on an expression host, Escherichia coli, the antimicrobial peptides were expressed as fusion proteins with a polypeptide F4, which is a truncated PurF fragment that highly tends to form inclusion bodies. Seven different kinds of antimicrobial peptides have been successfully expressed by this expression system and the resulting expression level of fusion proteins reached up to 30% of total cell proteins. To confirm the identity of the recombinant peptide, MSI-344 was selected as a model peptide and purified to homogeneity, and we could obtain the recombinant MSI-344 of a high purity and with a good yield, which was identical to the authentic peptide in the aspects of the chemical and antimicrobial properties. These results show that the neutral fusion partner, which reinforces the formation of inclusion bodies, could mediate a high-level expression of the antimicrobial peptides.