Crosslinking characteristics of porcine tendons: effects of fixation with glutaraldehyde or epoxy

Free-aldehyde neutralized and oligohyaluronan loaded bovine pericardium with improved anti-calcification and endothelialization for bioprosthetic heart valves

The number of patients with valvular heart disease is increasing yearly, and valve replacement is the most effective treatment, during which bioprosthetic heart valves (BHVs) are the most widely used. Commercial BHVs are mainly prepared with glutaraldehyde (Glut) cross-linked bovine pericardial or porcine aortic valves, but the residual free aldehyde groups in these tissues can cause calcification and cytotoxicity. Moreover, insufficient glycosaminoglycans (GAGs) in tissues can further reduce biocompatibility and durability. However, the anti-calcification performance and biocompatibility might be improved by blocking the free aldehyde groups and increasing the GAGs content in Glut-crosslinked tissues. In our study, adipic dihydrazide (ADH) was used to neutralize the residual free aldehyde groups in tissues and provide sites to blind with oligohyaluronan (OHA) to increase the content of GAGs in tissues. The modified bovine pericardium was evaluated for its content of residual aldehyde groups, the amount of OHA loaded, physical/chemical characteristics, biomechanical properties, biocompatibility, and in vivo anticalcification assay and endothelialization effects in juvenile Sprague-Dawley rats. The results showed that ADH could completely neutralize the free aldehyde groups in the Glut-crosslinked bovine pericardium, the amount of OHA loaded increased and the cytotoxicity was reduced. Moreover, the in vivo results also showed that the level of calcification and inflammatory response in the modified pericardial tissue was significantly reduced in a rat subcutaneous implantation model, and the results from the rat abdominal aorta vascular patch repair model further demonstrated the improved capability of the modified pericardial tissues for endothelialization. Furthermore, more α-SMA+ smooth muscle cells and fewer CD68+ macrophages infiltrated in the neointima of the modified pericardial patch. In summary, blocking free-aldehydes and loading OHA improved the anti-calcification, anti-inflammation and endothelialization properties of Glut-crosslinked BHVs and in particularly, this modified strategy may be a promising candidate for the next-generation of BHVs.

Photooxidation and Pentagalloyl Glucose Cross-Linking Improves the Performance of Decellularized Small-Diameter Vascular Xenograft In Vivo

Small-diameter vascular grafts have a significant need in peripheral vascular surgery and procedures of coronary artery bypass graft (CABG); however, autografts are not always available, synthetic grafts perform poorly, and allografts and xenografts dilate, calcify, and induce inflammation after implantation. We hypothesized that cross-linking of decellularized xenogeneic vascular grafts would improve the mechanical properties and biocompatibility and reduce inflammation, degradation, and calcification in vivo. To test this hypothesis, the bovine internal mammary artery (BIMA) was decellularized by detergents and ribozymes with sonication and perfusion. Photooxidation and pentagalloyl glucose (PGG) were used to cross-link the collagen and elastin fibers of decellularized xenografts. Modified grafts’ characteristics and biocompatibility were studied in vitro and in vivo; the grafts were implanted as transposition grafts in the subcutaneous of rats and the abdominal aorta of rabbits. The decellularized grafts were cross-linked by photooxidation and PGG, which improved the grafts’ biomechanical properties and biocompatibility, prevented elastic fibers from early degradation, and reduced inflammation and calcification in vivo. Short-term aortic implants in the rabbits showed collagen regeneration and differentiation of host smooth muscle cells. No occlusion and stenosis occurred due to remodeling and stabilization of the neointima. A good patency rate (100%) was maintained. Notably, implantation of non-treated grafts exhibited marked thrombosis, an inflammatory response, calcification, and elastin degeneration. Thus, photooxidation and PGG cross-linking are potential tools for improving grafts’ biological performance within decellularized small-diameter vascular xenografts.

Crosslinking porcine aortic valve by radical polymerization for the preparation of BHVs with improved cytocompatibility, mild immune response, and reduced calcification

Over one million artificial heart valve transplantations are performed each year due to valvular stenosis or regurgitation. Among them, bioprosthetic heart valves (BHVs) are increasingly being used because of the absence of the need for lifelong anticoagulation. Almost all of the commercial BHVs are treated with Glutaraldehyde (GLUT). As GLUT-treated BHVs are prone to calcification and structural degradation, their durability is greatly reduced with a service life of only 12-15 years. The physiological structure and mechanical properties of the porcine aortic valve (PAV) are closer to that of a human heart valve, so in this study, PAV is used as the model to explore the comprehensive properties of the prepared BHVs by radical polymerization crosslinking method. We found that PAV treated by radical polymerization crosslinking method showed similar ECM stability and biaxial mechanical properties with GLUT-treated PAV. However, radical polymerization crosslinked PAV exhibited better cytocompatibility and endothelialization potential in vitro cell experiment as better anticalcification potential and reduced immune response than GLUT-treated PAV through subcutaneous animal experiments in rats. To conclude, a novel crosslinking method of non-glutaraldehyde fixation of xenogeneic tissues for the preparation of BHVs is expected.

Development and characterization of bladder acellular matrix cross-linked by dialdehyde carboxymethyl cellulose for bladder tissue engineering

In order to address the disadvantage of rapid degradation and serious immune response of bladder acellular matrix (BAM) tissues in clinical application, in this study, oxidized carboxymethyl cellulose (DCMC) was developed to replace glutaraldehyde (GA), a most common synthetic crosslinking reagent in clinical practice, to fix BAM tissues for lower cytotoxicity. The aim of this work was to evaluate feasibility of DCMC as a crosslinking reagent for BAM fixation and developing DCMC fixed-BAM (D-BAM) tissues for tissue engineering. For the preparation of DCMC, the results showed that when DCMC was prepared using a specific concentration of sodium periodate solution (the mass ratio of NaIO₄/CMC is 1 : 1) and a specific reaction time (4 hours), its cytotoxicity was the lowest and its fixation effect was better. The critical crosslinking characteristics and cytocompatibility of optimum D-BAM tissues were also investigated. The results demonstrated that DCMC-fixation (especially 30 mg ml⁻¹ DCMC-fixation) not only formed stable cross-linking bonds but also preserved well the original ultrastructure of the BAM tissues, which simultaneously increased the mechanical strength and capacity of the enzymatic hydrolytic resistance. The DCMC-fixation could also reduce the expression of α-Gal in BAM tissues and preserve the useful growth factors such as GAGs, KGF and TGF-β in bladder tissues. In addition, 30 mg ml⁻¹ D-BAM tissues had excellent cytocompatibility. Moreover, it could stimulate the secretion of PDGF and EGF from seeded bladder transitional epithelial cells (BTECs), which is a critical feature for further re-epithelialization. Its anti-calcification ability was also prominent, which is necessary in bladder repair. The present studies demonstrated that DCMC could be a potential biological crosslinking agent for BAM fixation due to its excellent crosslinking effects, and the D-BAM tissues were suitable to be used as a substitute for the bladder due to their resistance to enzymatic degradation, anticalcification and cytocompatibility.

To address the disadvantage of rapid degradation and serious immune response of bladder acellular matrix tissues in clinical application, oxidized carboxymethyl cellulose was developed to replace commonly used glutaraldehyde, to fix BAM tissues for lower cytotoxicity.

Radical polymerization-crosslinking method for improving extracellular matrix stability in bioprosthetic heart valves with reduced potential for calcification and inflammatory response

In recent years, the number of heart valve replacements has multiplied with valve diseases because of aging populations and the surge in rheumatic heart disease in young people. Among them, bioprosthetic heart valves (BHVs) have become increasingly popular. Transcatheter aortic valve implantation (TAVI) valve as an emerging BHV has been increasingly applied to patients. However, the current commercially used BHVs treated with glutaraldehyde (Glut) still face the problem of durability. BHVs derived from Glut-treated xenogenetic tissues would undergo structural degeneration and calcification sometimes even as short as less than 10 years. This issue has already become a big challenge considering more and more young patients at the age of 50-60 s are receiving the BHV replacement. In our study, an approach that is totally different from the previous techniques named by us as the radical polymerization-crosslinking (RPC) method was developed to improve extracellular matrix stability, prevent calcification, and reduce inflammatory response in BHVs. The porcine pericardium (PP) tissue was decellularized, functionalized with methacryloyl groups, and subsequently crosslinked by radical polymerization. We found that high-density RPC treatment remarkably improved the stability of collagen and elastin of PP, enhanced its endothelialization potential, and provided reliable biomechanical performance as compared to Glut treatment. The in vivo rat model also confirmed the increased componential stability and the reduced inflammatory response of RPC-treated PP. Moreover, the RPC-treated PP showed better in vivo anticalcification potential than Glut-treated PP. STATEMENT OF SIGNIFICANCE: Bioprosthetic heart valves (BHVs) manufactured from glutaraldehyde (Glut)-treated xenogeneic tissues have been used to treat valve-related diseases for several decades. However, the durability of BHVs remains unresolved and becomes more pronounced particularly in younger patients. Although a number of new alternative methods for Glut crosslinking have been proposed, their overall performance is still far from ready to use in humans. In this study, radical polymerization was investigated for crosslinking the porcine pericardium (PP). This treatment was found to have advantages compared to Glut-treated PP in terms of stability, biocompatibility, and anticalcification potential with the hope of addressing the needs of more robust biomaterials for the fabrication of BHVs.

Effects of pH on the alginate dialdehyde (ADA)-crosslinking of natural biological tissues and in vitro study of the endothelial cell compatibility of ADA-crosslinked biological tissues

Investigating the optimal pH-environment for ADA fixation and the HUVECs compatibility of the ADA-fixed biological vascular scaffolds.

Crosslinking effect of dialdehyde starch (DAS) on decellularized porcine aortas for tissue engineering

Biological tissue-derived biomaterials must be chemically modified to avoid immediate degradation and immune response before being implanted in human body to replace malfunctioning organs. DAS with active aldehyde groups was employed to replace glutaraldehyde (GA), a most common synthetic crosslinking reagent in clinical practice, to fix bioprostheses for lower cytotoxicity. The aim of this research was to evaluate fixation effect of DAS. The tensile strength, crosslinking stability, cytotoxicity especially the anti-calcification capability of DAS-fixed tissues were investigated. The tensile strength and resistance to enzymatic degradation of samples were increased after DAS fixation, the values maintained stably in D-Hanks solution for several days. Meanwhile, ultrastructure of samples preserved well and the anti-calcification capability of samples were improved, the amount of positive staining points in the whole visual field of 15% DAS-fixed samples was only 0.576 times to GA-fixed ones. Moreover, both unreacted DAS and its hydrolytic products were nontoxic in cytotoxicity study. The results demonstrated DAS might be an effective crosslinking reagent to fix biological tissue-derived biomaterials in tissue engineering.

Designer blood vessels and therapeutic revascularization

Inadequate vascular perfusion leads to fatal heart attacks, chronic ulcers, and other serious clinical conditions. The body's capacity to restore vascular perfusion through angiogenesis and arteriogenesis is often impaired by pre-existing disease, and availability of native replacements for nonfunctional arteries is limited in many patients. Thus, recreating blood vessels of various calibres through novel engineering technologies has emerged as a radical option among therapeutic strategies for revascularization. Ranging from artificial, recycled or reassembled natural conduits to sophisticated microdevices, we refer to these as 'designer blood vessels'. Our common efforts to continuously improve vascular replacement design have provided many clues about our own blood vessels, but nature's ability to create nonthrombogenic, immunocompatible, strong, yet biologically responsive blood vessels remains unparalleled. Just as art reproductions never equal the original masterpiece, designer blood vessels may never attain nature's perfection. Nevertheless, they will provide a valuable option as long as they come close enough and are available to many.

Effects of matrix stabilization when using glutaraldehyde on the material properties of porcine meniscus

Meniscus transplantation frequently is one of the only options available for treating symptomatic younger patients with tibiofemoral pain and early arthrosis after a prior meniscectomy. However, clinical results indicate that current meniscal allografts may undergo degenerative changes due to enzymatic degradation during the remodeling phase. The objective of this study was to evaluate the effects of glutaraldehyde-induced matrix stabilization on the material properties of porcine meniscus prior to surgical implantation. Protocols for fabricating heart-valve replacements were examined, followed by an exploration of the effects of reducing glutaraldehyde concentration and exposure time. Cylindrical meniscus specimens were tested in uniaxial confined compression under a 0.196 MPa compressive stress, and aggregate modulus (H(A)), permeability (k), and compressive strains at equilibrium (epsilon(eq)) were calculated from the creep response. Compared to controls, the mean values for H(A) and k increased, on average, by 213 and 709%, respectively, and epsilon(eq) decreased by 57% for all "heart-valve" treatments. Reducing tissue exposure time to glutaraldehyde had little effect, but decreasing glutaraldehyde concentration to 0.02% resulted in tissues with material properties no different from the untreated controls. We conclude that minimal concentrations of glutaraldehyde (less than 0.2%) should be used in future studies to preserve normal meniscus properties.

A biological hybrid model for collagen-based tissue engineered vascular constructs

Various approaches to tissue engineering a small diameter blood vessel have historically relied upon extended culturing periods and/or synthetic materials to create mechanical properties suitable to withstand the hemodynamic stresses of the vasculature. In this work, we present the concept of a construct-sleeve hybrid (CSH) graft, which uses a biological support to provide temporary reinforcement while cell-mediated remodeling of the construct occurs. Support sleeves were fabricated from Type I collagen gels and crosslinked with glutaraldehyde, ultraviolet, or dehydrothermal treatments. Uniaxial tensile testing of acellular sleeves revealed increased stiffness moduli and tensile stresses with crosslinking treatments. A second collagen layer containing cells was molded about the sleeve to create a CSH. After in vitro culture, CHSs with uncrosslinked (UnXL) and glutaraldehyde treated (Glut) sleeves exhibited significant increases in mechanical strength (20.4-fold and 121-fold increases in ultimate stress, respectively) compared to unreinforced control constructs. Burst testing produced similar findings with peak pressures of 100 and 650mmHg in the UnXL and Glut CSHs, respectively. Construct compaction, cell viability, and histological examination demonstrated that the function of most cells remained unimpaired with the incorporation of the biological support sleeve.

Crosslinking and modification of dermal sheep collagen using 1, 4-butanediol diglycidyl ether

Crosslinking of dermal sheep collagen (DSC) was accomplished using 1, 4-butanediol diglycidyl ether (BDDGE). At pH values > 8.0, epoxide groups of BDDGE will react with amine groups of collagen. The effects of BDDGE concentration, pH, time, and temperature were studied. Utilization of a 4-wt % BDDGE instead of 1-wt % resulted in a faster reaction. Whereas similar values of shrinkage temperature were obtained, fewer primary amine groups had reacted at a lower BDDGE concentration, which implies that the crosslinking reaction had a higher efficacy. An increase in pH from 8.5 to 10.5 resulted in a faster reaction but reduced crosslink efficacy. Furthermore, an increase in reaction temperature accelerated the reaction without changing the crosslink efficacy. Crosslinking under acidic conditions (pH < 6.0) evoked a reaction between epoxide groups and carboxylic acid groups of collagen. Additional studies showed that no oligomeric crosslinks could be formed. However, hydrolysis of the epoxide groups played a role in the crosslink mechanism especially under acidic reaction conditions. The macroscopic properties of these materials were dependent on the crosslinking method. Whereas a flexible and soft tissue was found if crosslinking was performed at pH < 6.0, a stiff sponge was obtained under alkaline conditions. Reaction of DSC with a monofunctional compound (glycidyl isopropyl ether) led to comparable trends in reaction rate and in similar macroscopical differences in materials as observed with BDDGE.

In vitro evaluation of cytotoxicity of a naturally occurring cross-linking reagent for biological tissue fixation

A recognized drawback of the currently available chemical cross-linking reagents used to fix bioprostheses is the potential toxic effects a recipient may be exposed to from the fixed tissues and/or the residues. It is, therefore, desirable to provide a cross-linking reagent which is of low cytotoxicity and may form stable and biocompatible cross-linked products. To achieve this goal, a naturally occurring cross-linking reagent -- genipin -- which has been used in herbal medicine and in the fabrication of food dyes, was used by our group to fix biological tissues. The study was to assess the cytotoxicity of genipin in vitro using 3T3 fibroblasts (BALB/3T3 C1A31-1-1). Glutaraldehyde, the most commonly used cross-linking reagent for tissue fixation, was used as a control. The cytotoxicity of the glutaraldehyde- and genipin-fixed tissues and their residues was also evaluated and compared. The observation in the light microscopic examination revealed that the cytotoxicity of genipin was significantly lower than that of glutaraldehyde. Additionally, the results obtained in the MTT assay implied that genipin was about 10000 times less cytotoxic than glutaraldehyde. Moreover, the colony forming assay suggested that the proliferative capacity of cells after exposure to genipin was approximately 5000 times greater than that after exposure to glutaraldehyde. It was noted that the cells seeded on the surface of the glutaraldehyde-fixed tissue were not able to survive. In contrast, the surface of the genipin-fixed tissue was found to be filled with 3T3 fibroblasts. Additionally, neocollagen fibrils made by these fibroblasts were observed on the genipin-fixed tissue. This fact suggested that the cellular compatibility of the genipin-fixed tissue was superior to its glutaraldehyde-fixed counterpart. Also, the residues from the glutaraldehyde-fixed tissue markedly reduced the population of the cultured cells, while those released from the genipin-fixed tissue had no toxic effect on the seeded cells. In conclusion, as far as cytotoxicity is concerned, genipin is a promising cross-linking reagent for biological tissue fixation.

Collagen--biomaterial for drug delivery

The use of collagen as a biomaterial is currently undergoing a renaissance in the tissue engineering field. The biotechnological applications focus on the aspects of cellular growth or delivery of proteins capable of stimulating cellular response. However, basic knowledge about collagen biochemistry and the processing technology in combination with understanding of the physico-chemical properties is necessary for an adequate application of collagen for carrier systems. The purpose of this review article is to summarize information available on collagen dosage forms for drug delivery as well as to impart an overview of the chemical structures and the galenical properties including detailed description of the processing steps - extraction, purification, chemical crosslinking and sterilization. The most successful and stimulating applications are shields in ophthalmology, injectable dispersions for local tumor treatment, sponges carrying antibiotics and minipellets loaded with protein drugs. However, the scientific information about manipulating release properties or mechanistic studies is not as abundant as for some synthetic polymers.

The chemical protecting group concept applied in crosslinking of natural tissues with glutaraldehyde acetals

This work describes the results of the controlled crosslinking of collagen matrices by glutaraldehyde based on a double protection strategy, glutaraldehyde acetals and lysine protonation due to the acidic conditions of acetal formation. Materials crosslinked by this approach were characterized by thermal stability comparable to those obtained by conventional procedures with mechanical properties expected for bioprosthesis manufacture and with a higher stability toward collagenase hydrolysis. The integrity of the microfibrillar structure was confirmed by optical and scanning electronic microscopy. The results indicate that the glutaraldehyde acetals procedure may be of potential use for the crosslinking of bovine pericardium used in the manufacture of bioprosthetic devices. Advantages may be related to the production of materials with homogeneous crosslinking distributions, associated with better definition in the nature of the chemical link that they introduce, due to a better distribution of glutaraldehyde within the tissue matrix before the crosslinking reaction is allowed to occur. As a result, materials with improved biological and mechanical properties are expected.

Degradation potential of biological tissues fixed with various fixatives: an in vitro study

The purpose of this study was to investigate the in vitro degradation potential of porcine pericardia fixed with various aldehyde or epoxy compound (EC) fixatives, using bacterial collagenase and pronase. The fixatives investigated were formaldehyde (FA), glutaraldehyde (GA), monofunctional EC (EX-131), and multifunctional ECs (EX-810, EX-313, and EX-512). Fresh porcine pericardium was used as a control. The test samples were well immersed in a 20-U/mL collagenase solution or a 10-U/mL pronase solution and incubated at 37 degrees C at pH 7.5 for 24 h. The extent of degradation of each test sample was determined by measuring its increment in free amino group content and changes in collagen structure, denaturation temperature, and tensile stress after degradation. In general, the extent of tissue degradation with pronase was more notable than with collagenase. As observed with fresh tissue, the EX-131 EC fixed tissue radically disintegrated after either collagenase or pronase degradation, whereas the other test samples remained intact. The reason for this may reside in the more random molecular packing of the EX-131 EC-fixed tissue, which led to some loss in its helical integrity. This made penetration of enzymes into biological tissue easier. Of the multifunctional EC test groups, tissues fixed with tetrafunctional EC (EX-521) or trifunctional EC (EX-313) had relatively better resistance to degradation than those fixed with bifunctional EC (EX-810). The extent of degradation for the EX-313 or EX-512 EC fixed tissues was similar to that observed for the FA- or GA-fixed tissues. The results of this study indicated that the biological tissue fixed with monofunctional EC (EX-131) cannot resist bacterial collagenase or pronase degradation. However, resistance to degradation of the multifunctional EC (EX-313 or EX-152)-fixed tissues was comparable to that of the aldehyde (FA or GA)-fixed tissues. Therefore, of various EC fixatives, the EC with a greater number of functional groups should be chosen for tissue fixation to increase its resistance to enzymatic degradation.

Methods for the treatment of collagenous tissues for bioprostheses

Collagenous tissue as a biomaterial possesses many favourable characteristics and advantages over synthetic materials. The resemblance to human tissue suggests that it has a performance advantage over alternative materials. This advantage has been exploited to produce clinical devices that have been implanted in patients for more than a quarter of a century. The method of treating collagenous tissue for bioprostheses has developed from crude exposure of tissue to chemicals to a sophisticated level of considering the biochemical, chemical, engineering and clinical aspects of the process. This review focuses on the various chemical and physical treatments that have made the bioprostheses possible, highlighting the chemical agents and the cross-linking mechanism involved.

In vitro study of enzymatic degradation of biological tissues fixed by glutaraldehyde or epoxy compound

The study, using bacterial collagenase, was to investigate the changes in characteristics of a collagen-rich tissue, porcine pericardium, fixed by glutaraldehyde or epoxy compound (ethylene glycol diglycidyl ether) during the course of degradation. Fresh porcine pericardium was used as a control. During degradation, the heat released by the reaction of collagenase with a test sample was monitored by a highly sensitive microcalorimeter. Also, the degree of degradation of each test sample was determined by measuring its increment in free amino group content and changes in denaturation temperature and tensile strength. Microcalorimetric analysis of collagenase degradation of fresh, epoxy-fixed, and glutaraldehyde-fixed tissues revealed that the heat released during degradation correlates well with the degree of tissue degraded. The cleaving of peptide bonds in biological tissue by collagenase degradation may increase its free amino group content and reduce its denaturation temperature and tensile strength. It was noted that the fresh tissue cannot resist bacterial collagenase degradation, while the glutaraldehyde-fixed tissue had a relatively better resistance to degradation than its epoxy-fixed counterpart.

Physical properties of a porcine internal thoracic artery fixed with an epoxy compound

This study aimed to investigate the physical properties of a porcine internal thoracic artery fixed with an epoxy compound. Fresh and glutaraldehyde-fixed porcine arteries were used as controls. Both the epoxy-fixed and glutaraldehyde-fixed porcine arteries showed significant increases in fixation index and denaturation temperature as compared to the fresh one. Additionally, the resistance of porcine arteries against bacterial collagenase in vitro degradation increased significantly after cross-linking with the epoxy compound of glutaraldehyde. The reduction of the tensile strength of the epoxy-fixed artery after bacterial collagenase degradation was more severe than in its glutaraldehyde-fixed counterpart. Generally, with increasing pH, temperature or fixative concentration, the fixation indices and denaturation temperatures of the epoxy-fixed porcine arteries increased. The results obtained in this study may be used to optimize the fixation process for developing a small-diameter biological vascular graft fixed by an epoxy compound.

Cross-linking characteristics of biological tissues fixed with monofunctional or multifunctional epoxy compounds

The cross-linking characteristics of biological tissues fixed by various epoxy compounds with different chemical structures (i.e. number of epoxide functional groups and backbone length) were investigated. Generally speaking, the tissues fixed with monofunctional fixatives were more pliable than those fixed with multifunctional fixatives. The fixation indices of the fixed tissues did not seem to be affected by the chemical structures of the fixatives. However, the number of functional groups and backbone length of the fixatives did play an important role in influencing the denaturation temperatures of the fixed tissues. In general, the denaturation temperatures of the multifunctional fixed tissues were higher than those of the monofunctional fixed tissues. Among the monofunctional fixed tissues, it was found that increasing the backbone length of the fixative decreased the denaturation temperature of the fixed tissue. This effect was present until the backbone length of the fixative became large enough.

Studies on epoxy compound fixation

Bioprostheses derived from collagenous tissues have to be fixed and subsequently sterilized before they can be implanted in humans. Clinically, the most commonly used fixative is glutaraldehyde. However, the tendency for glutaraldehyde to markedly alter tissue stiffness and promote tissue calcification are well-recognized drawbacks of this fixative. To address the deficiencies with the glutaraldehyde-fixed tissue, a new fixative, epoxy compound, was used to fix biological prostheses. The study was undertaken to investigate the fixation rates and crosslinking densities of biological tissues fixed with various epoxy compounds. These epoxy compounds are different in their chemical structures. Glutaraldehyde was used as a control. The fixation rates and crosslinking densities of the fixed tissues were determined by measuring their fixation indices and denaturation temperatures, respectively. Generally, the epoxy-fixed tissues were more pliable than the glutaraldehyde-fixed one. Furthermore, the tissues fixed with monofunctional epoxy compound were more pliable than those fixed with multifunctional epoxy compounds. With increasing pH or temperature, the fixation rate of epoxy compound increased. However, the number of epoxide functional groups did not seem to affect the fixation rate of the epoxy compound. The fixation rate of glutaraldehyde was faster than that of epoxy compounds. Additionally, the crosslinking density of the glutaraldehyde-fixed tissue was greater than that of the epoxy-fixed counterparts. Moreover, it was noted that the denaturation temperatures of the tissues fixed with glutaraldehyde or multifunctional epoxy compounds were significantly higher than the fresh ones (p < 0.05), while that fixed with monofunctional epoxy compound stayed roughly the same throughout the entire fixation process (p > 0.05). The results obtained in this study may be used to optimize the fixation process for developing bioprostheses fixed with epoxy compounds.