Incorporation of a fluorocarbon polymer implanted at the posterior surface of the rabbit cornea

Examining porous bio-active glass as a potential osteo-odonto-keratoprosthetic skirt material

Bio-active glass has been developed for use as a bone substitute with strong osteo-inductive capacity and the ability to form strong bonds with soft and hard tissue. The ability of this material to enhance tissue in-growth suggests its potential use as a substitute for the dental laminate of an osteo-odonto-keratoprosthesis. A preliminary in vitro investigation of porous bio-active glass as an OOKP skirt material was carried out. Porous glass structures were manufactured from bio-active glasses 1-98 and 28-04 containing varying oxide formulation (1-98, 28-04) and particle size range (250-315 μm for 1-98 and 28-04a, 315-500 μm for 28-04b). Dissolution of the porous glass structure and its effect on pH was measured. Structural 2D and 3D analysis of porous structures were performed. Cell culture experiments were carried out to study keratocyte adhesion and the inflammatory response induced by the porous glass materials. The dissolution results suggested that the porous structure made out of 1-98 dissolves faster than the structures made from glass 28-04. pH experiments showed that the dissolution of the porous glass increased the pH of the surrounding solution. The cell culture results showed that keratocytes adhered onto the surface of each of the porous glass structures, but cell adhesion and spreading was greatest for the 98a bio-glass. Cytokine production by all porous glass samples was similar to that of the negative control indicating that the glasses do not induce a cytokine driven inflammatory response. Cell culture results support the potential use of synthetic porous bio-glass as an OOKP skirt material in terms of limited inflammatory potential and capacity to induce and support tissue ingrowth.

Synthetic corneal inlays

This review is based on the activities of the Vision Cooperative Research Centre (previously Cooperative Research Centre for Eye Research and Technology) Corneal Implant team from 1991 to 2007. The development of a synthetic polymer of perfluoropolyether (PFPE), meeting essential physical and biological requirements, for use as a corneal inlay is presented. Each inlay was placed in a corneal flap created with a microkeratome and monitored over a two-year period in a rabbit model. The results indicate that the PFPE implant shows excellent biocompatibility and biostability. As a result, a Phase 1 clinical trial is being conducted. Three years post-implantation, the PFPE inlays are exhibiting continued excellent biocompatibility. Corneal inlays made from PFPE are biocompatible with corneal tissue in the long term and offer a safe and biologically-acceptable alternative to other forms of refractive surgery.

Antibacterial Surfaces on Expanded Polytetrafluoroethylene; Penicillin Attachment

Expanded polytetrafluoroethylene (ePTFE) was chemically modified to retard the growth of Staphylococcus aureus bacteria. This was accomplished by microwave plasma reactions in the presence of maleic anhydride (MA) to create acid functional groups on ePTFE surfaces, followed by esterification reactions with 200 and 600 molecular weight linear polyethylene glycol (PEG). Such surfaces were utilized for further reactions with penicillin (PEN) through etherification reactions to create anti-microbial surfaces. These reactions resulted in surface morphological changes, and spectroscopic analysis using attenuated total reflectance Fourier transform infrared spectroscopy (ATR FT-IR) revealed the formation of ester linkages resulting from reactions between PEN and PEG functionalities. Antibacterial activities were evaluated by a series of experiments where PEN-modified ePTFE specimens were immersed in a liquid aureus culture, and the bacteria growth was quantified by measuring % absorbance of the suspension at 600 nm wavelength. The lowest absorbance was observed for the solution containing PEN-PEG-MA-ePTFE specimens, thus showing highly effective anti-bacterial activity toward gram-positive Staphylococcus aureus bacteria. To our best knowledge, this is the first study that shows PEN-ePTFE surface modifications that are effective against gram-positive aureus bacteria.

A review of the development of a synthetic corneal onlay for refractive correction

A synthetic corneal onlay, or implantable contact lens, could obviate the need for spectacles or conventional contact lenses in patients who seek convenient, reversible correction of refractive error. Several research groups have attempted to develop such a product in the past but much of the data from these studies remains unpublished due to commercial interests. This article reviews relevant papers and patents in the corneal implant field and discusses our efforts to develop a synthetic corneal onlay using a perfluoropolyether-based polymer.

Quantification and localization of hyaluronan in a PTFE polymer implanted in the corneal stroma

The amount and distribution of hyaluronan in a PTFE polymer used to support an artificial cornea implanted in the rabbit cornea were determined. The findings were used to describe the polymer-corneal stroma interface and the reason for the translucence and wettability of this originally opaque and hydrophobic biomaterial. PTFE disks (6 mm in diameter, 0.2 mm thick, 50 microns in pore size) were implanted after a free-hand intralamellar dissection. The corneas were removed 15 days, 1 month, and 3 months after implantation. The hyaluronan content of pepsin-solubilized corneal stromal extracts and its distribution (7 microns cryostat sections) were investigated using an alkaline phosphatase-linked hyaluronectin assay that specifically detects nanogram amounts of hyaluronan. A PTFE polymer implant caused large, transient increases in hyaluronan density in the implanted stroma. The presence of amphiphilic hyaluronan in the polymer 15 days post implantation probably produced translucence and wettability of this opaque, hydrophobic implant despite the absence of cells. The hyaluronan density in the PTFE polymer increased considerably during the first month and then decreased to stabilize at a moderate level by the third month. These changes in hyaluronan density parallel the invasion of the polymer by inflammatory cells during the first month and the subsequent replacement of these cells by fibroblasts. The PTFE polymer is a good interface that is compatible with the native corneal stroma, and our results indicate that hyaluronan, because of its amphiphilic character, plays a major role in the polymer wettability and translucence and in the production of typical corneal extracellular matrix within the pores of the polymer.