Influence of biphasic calcium phosphate granulometry on bone ingrowth, ceramic resorption, and inflammatory reactions: preliminary in vitro and in vivo study

The development of non-resorbable bone allografts: Biological background and clinical perspectives

Bone grafts are typically categorized into four categories: autografts, allografts, xenografts, and synthetic alloplasts. While it was originally thought that all bone grafts should be slowly resorbed and replaced with native bone over time, accumulating evidence has in fact suggested that the use of nonresorbable xenografts is favored for certain clinical indications. Thus, many clinicians take advantage of the nonresorbable properties/features of xenografts for various clinical indications, such as contour augmentation, sinus grafting, and guided bone regeneration, which are often combined with allografts (e.g., human freeze-dried bone allografts [FDBAs] and human demineralized freeze-dried bone allografts [DFDBAs]). Thus, many clinicians have advocated different 50/50 or 70/30 ratios of allograft/xenograft combination approaches for various grafting procedures. Interestingly, many clinicians believe that one of the main reasons for the nonresorbability or low substitution rates of xenografts has to do with their foreign animal origin. Recent research has indicated that the sintering technique and heating conducted during their processing changes the dissolution rate of hydroxyapatite, leading to a state in which osteoclasts are no longer able to resorb (dissolve) the sintered bone. While many clinicians often combine nonresorbable xenografts with the bone-inducing properties of allografts for a variety of bone augmentation procedures, clinicians are forced to use two separate products owing to their origins (the FDA/CE does not allow the mixture of allografts with xenografts within the same dish/bottle). This has led to significant progress in understanding the dissolution rates of xenografts at various sintering temperature changes, which has since led to the breakthrough development of nonresorbable bone allografts sintered at similar temperatures to nonresorbable xenografts. The advantage of the nonresorbable bone allograft is that they can now be combined with standard allografts to create a single mixture combining the advantages of both allografts and xenografts while allowing the purchase and use of a single product. This review article presents the concept with evidence derived from a 52-week monkey study that demonstrated little to no resorption along with in vitro data supporting this novel technology as a "next-generation" biomaterial with optimized bone grafting material properties.

Degradation of 3D-printed magnesium phosphate ceramics in vitro and a prognosis on their bone regeneration potential

Regenerative bone implants promote new bone formation and ideally degrade simultaneously to osteogenesis. Although clinically established calcium phosphate bone grafts provide excellent osseointegration and osteoconductive efficacy, they are limited in terms of bioresorption. Magnesium phosphate (MP) based ceramics are a promising alternative, because they are biocompatible, mechanically extremely stable, and degrade much faster than calcium phosphates under physiological conditions. Bioresorption of an implant material can include both chemical dissolution as well as cellular resorption. We investigated the bioresorption of 3D powder printed struvite and newberyite based MP ceramics in vitro by a direct human osteoclast culture approach. The osteoclast response and cellular resorption was evaluated by means of fluorescence and TRAP staining, determination of osteoclast activities (CA II and TRAP), SEM imaging as well as by quantification of the ion release during cell culture. Furthermore, the bioactivity of the materials was investigated via SBF immersion, whereas hydroxyapatite precipitates were analyzed by SEM and EDX measurements. This bioactive coating was resorbed by osteoclasts. In contrast, only chemical dissolution contributed to bioresorption of MP, while no cellular resorption of the materials was observed. Based on our results, we expect an increased bone regeneration effect of MP compared to calcium phosphate based bone grafts and complete chemical degradation within a maximum of 1.5-3.1 years.

Bone Beads Enveloped with Vascular Endothelial Cells for Bone Regenerative Medicine

The transplantation of pre-vascularized bone grafts is a promising strategy to improve the efficacy of engraftment and bone regeneration. We propose a hydrogel microbead-based approach for preparing vascularized and high-density tissue grafts. Mesenchymal stem cell-encapsulated collagen microgels (2 µL), termed bone beads, were prepared through spontaneous constriction, which improved the density of the mesenchymal stem cells and collagen molecules by more than 15-fold from the initial day of culture. Constriction was attributed to cell-attractive forces and involved better osteogenic differentiation of mesenchymal stem cells than that of spheroids. This approach was scalable, and ∼2,000 bone beads were prepared semi-automatically using a liquid dispenser and spinner flask. The mechanical stimuli in the spinner flask further improved the osteogenic differentiation of the mesenchymal stem cells in the bone beads compared with that in static culture. Vascular endothelial cells readily attach to and cover the surface of bone beads. The in vitro assembly of the endothelial cell-enveloped bone beads resulted in microchannel formation in the interspaces between the bone beads. Significant effects of endothelialization on in vivo bone regeneration were shown in rats with cranial bone defects. The use of endothelialized bone beads may be a scalable and robust approach for treating large bone defects. STATEMENT OF SIGNIFICANCE: A unique aspect of this study is that the hMSC-encapsulated collagen microgels were prepared through spontaneous constriction, leading to the enrichment of collagen and cell density. This constriction resulted in favorable microenvironments for the osteogenic differentiation of hMSCs, which is superior to conventional spheroid culture. The microgel beads were then enveloped with vascular endothelial cells and assembled to fabricate a tissue graft with vasculature in the interspaces among the beads. The significant effects of endothelialization on in vivo bone regeneration were clearly demonstrated in rats with cranial bone defects. We believe that microgel beads covered with vascular endothelial cells provide a promising approach for engineering better tissue grafts for bone-regenerative medicine.

In vitro immunomodulatory effects of novel strontium and zinc-containing GPCs

BACKGROUND

Glass polyalkenoate cements (GPCs) are bio-adhesives which consist of ionomeric glass particles embedded in a poly-salt matrix. These materials have been used in dentistry and orthodontics extensively but are presently being optimized as bone putties for orthopedic applications.

OBJECTIVE

This study utilized a patented ionomeric glass (mole fraction: SiO2:0.48, ZnO:0.36, CaO:0.12, SrO:0.04) to formulate two GPCs: GPC A (<45 μm particle size glass) and GPC B (45 μm-63 μm). These formulations were previously assessed for their effect on osteoblast viability and osteogenic function. However, the immunomodulatory effects of GPC A and B have not previously been investigated.

METHOD

Non-toxic concentrations of (a) GPC dissolution products and (b) fragmented GPC particles were tested for their ability to affect the secretion of cytokines (TNF-α, IL-1β, IL-6 and IL-10) by rat peripheral blood mononuclear cells (PBMCs), in the presence or absence of the stimulant liposaccharide (LPS). Additionally, the ionic concentrations of Sr, Zn, Ca, and Si were measured in GPC ionic extracts, and the size, shape and concentration of fragmented GPC particles in deionized water were characterized using an optical microscope-based particle analyzer.

RESULTS

The results showed that GPC A ionic products reduced the concentration of TNF-α secreted by stimulated cells compared with cells stimulated in the absence of GPC products. Interestingly, the particles released from GPC A significantly increased the secretion of both TNF-α and IL-6 from unstimulated cells, compared to control cells.

CONCLUSION

Neither GPC B ionic products nor released particles were found to be biologically active with respect to PBMC cytokine secretion.

The Granule Size Mediates the In Vivo Foreign Body Response and the Integration Behavior of Bone Substitutes

The physicochemical properties of synthetically produced bone substitute materials (BSM) have a major impact on biocompatibility. This affects bony tissue integration, osteoconduction, as well as the degradation pattern and the correlated inflammatory tissue responses including macrophages and multinucleated giant cells (MNGCs). Thus, influencing factors such as size, special surface morphologies, porosity, and interconnectivity have been the subject of extensive research. In the present publication, the influence of the granule size of three identically manufactured bone substitute granules based on the technology of hydroxyapatite (HA)-forming calcium phosphate cements were investigated, which includes the inflammatory response in the surrounding tissue and especially the induction of MNGCs (as a parameter of the material degradation). For the in vivo study, granules of three different size ranges (small = 0.355-0.5 mm; medium = 0.5-1 mm; big = 1-2 mm) were implanted in the subcutaneous connective tissue of 45 male BALB/c mice. At 10, 30, and 60 days post implantationem, the materials were explanted and histologically processed. The defect areas were initially examined histopathologically. Furthermore, pro- and anti-inflammatory macrophages were quantified histomorphometrically after their immunohistochemical detection. The number of MNGCs was quantified as well using a histomorphometrical approach. The results showed a granule size-dependent integration behavior. The surrounding granulation tissue has passivated in the groups of the two bigger granules at 60 days post implantationem including a fibrotic encapsulation, while a granulation tissue was still present in the group of the small granules indicating an ongoing cell-based degradation process. The histomorphometrical analysis showed that the number of proinflammatory macrophages was significantly increased in the small granules at 60 days post implantationem. Similarly, a significant increase of MNGCs was detected in this group at 30 and 60 days post implantationem. Based on these data, it can be concluded that the integration and/or degradation behavior of synthetic bone substitutes can be influenced by granule size.

Injectable silanized hyaluronic acid hydrogel/biphasic calcium phosphate granule composites with improved handling and biodegradability promote bone regeneration in rabbits

Biphasic calcium phosphate (BCP) granules are osteoconductive biomaterials used in clinics to favor bone reconstruction. Yet, poor cohesivity, injectability and mechanical properties restrain their use as bone fillers. In this study, we incorporated BCP granules into in situ forming silanized hyaluronic acid (Si-HA) and hydroxypropylmethylcellulose (Si-HPMC) hydrogels. Hydrogel composites were shown to be easily injectable (F < 30 N), with fast hardening properties (<5 min), and similar mechanical properties (E∼ 60 kPa). In vivo, both hydrogels were well tolerated by the host, but showed different biodegradability with Si-HA gels being partially degraded after 21d, while Si-HPMC gels remained stable. Both composites were easily injected into critical size rabbit defects and remained cohesive. After 4 weeks, Si-HPMC/BCP led to poor bone healing due to a lack of degradation. Conversely, Si-HA/BCP composites were fully degraded and beneficially influenced bone regeneration by increasing the space available for bone ingrowth, and by accelerating BCP granules turnover. Our study demonstrates that the degradation rate is key to control bone regeneration and that Si-HA/BCP composites are promising biomaterials to regenerate bone defects.

Proteomic analysis identified LBP and CD14 as key proteins in blood/biphasic calcium phosphate microparticle interactions

Immediately upon implantation, scaffolds for bone repair are exposed to the patient's blood. Blood proteins adhere to the biomaterial surface and the protein layer affects both blood cell functions and biomaterial bioactivity. Previously, we reported that 80-200 µm biphasic calcium phosphate (BCP) microparticles embedded in a blood clot, induce ectopic woven bone formation in mice, when 200-500 µm BCP particles induce mainly fibrous tissue. Here, in a LC-MS/MS proteomic study we compared the differentially expressed blood proteins (plasma and blood cell proteins) and the deregulated signaling pathways of these osteogenic and fibrogenic blood composites. We showed that blood/BCP-induced osteogenesis is associated with a higher expression of fibrinogen (FGN) and an upregulation of the Myd88- and NF-κB-dependent TLR4 signaling cascade. We also highlighted the key role of the LBP/CD14 proteins in the TLR4 activation of blood cells by BCP particles. As FGN is an endogenous ligand of TLR4, able to modulate blood composite stiffness, we propose that different FGN concentrations modify the blood clot mechanical properties, which in turn modulate BCP/blood composite osteoactivity through TLR4 signaling. The present findings provide an insight at the protein level, into the mechanisms leading to an efficient bone reconstruction by blood/BCP composites. STATEMENT OF SIGNIFICANCE: Upon implantation, scaffolds for bone repair are exposed to the patient's blood. Blood proteins adhere to bone substitute surface and this protein layer affects both biomaterial bioactivity and bone healing. Therefore, for the best outcome for patients, it is crucial to understand the molecular interactions between blood and bone scaffolds. Biphasic calcium phosphate (BCP) ceramics are considered as the gold standard in bone reconstruction surgery. Here, using proteomic analyses we showed that the osteogenic properties of 80-200 µm BCP particles embedded in a blood clot is associated with a higher expression of fibrinogen. Fibrinogen upregulates the Myd88- and NF-κB-dependent TLR4 pathway in blood cells and, BCP-induced TLR4 activation is mediated by the LBP and CD14 proteins.

The Use of Biphasic Calcium Phosphate Substitute (BCP) in Mandibular Defects in Dogs: Use of CBCT to Evaluate Bone Healing

This study aimed to assess the use of cone beam computed tomography (CBCT) to follow-up bone healing of mandibular bone defects in dogs, filled with a combination of autologous blood and millimetric BCP granules. CBCT was performed ≥4 weeks postoperatively. CBCT gray-scale values were measured from multiplanar reconstructions of the defects and compared to that of normal contralateral mandibular bone and to pure BCP/blood composite time 0 (T0) value. Other parameters, determined by affecting grades according to specific criteria included: bone ridge margin restoration; biomaterial homogeneity; bone-biomaterial interface. Results: 8 dogs with 14 defects were included. Median age was 7.2 years (1-15 years). Follow-up CBCT was performed 1 to 7.5 months postoperatively (mean 3.3 months). Defect CBCT gray-scale values at follow-up were significantly greater than T0 (p < 0.05). Ratios of maximum and minimum densities of the defects to contralateral mandibular bone followed a linear correlation with time (p < 0.05). The bone ridge margin was adequately restored in all the defects and significantly correlated with time (p = 0.03). Biomaterial homogeneity was fair to good in 11 defects and significantly correlated with the bone ridge margin parameter (p = 0.05) and time (p = 0.006). There was no significant correlation with the bone-material interface. The latter was satisfactory in 12 defects and significantly correlated with time (p = 0.01) but not with the other parameters. The biomaterial was more homogeneous in smaller defects and with increasing time. CBCT allowed effective assessment of bone healing via the measurement of CBCT gray-scale values and assessment of multiple radiological variables.

Fibrin biopolymer as scaffold candidate to treat bone defects in rats

BACKGROUND

Bone tissue repair remains a challenge in tissue engineering. Currently, new materials are being applied and often integrated with live cells and biological scaffolds. The fibrin biopolymer (FBP) proposed in this study has hemostatic, sealant, adhesive, scaffolding and drug-delivery properties. The regenerative potential of an association of FBP, biphasic calcium phosphate (BCP) and mesenchymal stem cells (MSCs) was evaluated in defects of rat femurs.

METHODS

Adult male Wistar rats were submitted to a 5-mm defect in the femur. This was filled with the following materials and/or associations: BPC; FBP and BCP; FBP and MSCs; and BCP, FBP and MSCs. Bone defect without filling was defined as the control group. Thirty and sixty days after the procedure, animals were euthanatized and subjected to computed tomography, scanning electron microscopy and qualitative and quantitative histological analysis.

RESULTS

It was shown that FBP is a suitable scaffold for bone defects due to the formation of a stable clot that facilitates the handling and optimizes the surgical procedures, allowing also cell adhesion and proliferation. The association between the materials was biocompatible. Progressive deposition of bone matrix was higher in the group treated with FBP and MSCs. Differentiation of mesenchymal stem cells into osteogenic lineage was not necessary to stimulate bone formation.

CONCLUSIONS

FBP proved to be an excellent scaffold candidate for bone repair therapies due to application ease and biocompatibility with synthetic calcium-based materials. The satisfactory results obtained by the association of FBP with MSCs may provide a more effective and less costly new approach for bone tissue engineering.

Functionalization of Ceramic Coatings for Enhancing Integration in Osteoporotic Bone: A Systematic Review

Background: The success of reconstructive orthopaedic surgery strongly depends on the mechanical and biological integration between the prosthesis and the host bone tissue. Progressive population ageing with increased frequency of altered bone metabolism conditions requires new strategies for ensuring an early implant fixation and long-term stability. Ceramic materials and ceramic-based coatings, owing to the release of calcium phosphate and to the precipitation of a biological apatite at the bone-implant interface, are able to promote a strong bonding between the host bone and the implant. Methods: The aim of the present systematic review is the analysis of the existing literature on the functionalization strategies for improving the implant osteointegration in osteoporotic bone and their relative translation into the clinical practice. The review process, conducted on two electronic databases, identified 47 eligible preclinical studies and 5 clinical trials. Results: Preclinical data analysis showed that functionalization with both organic and inorganic molecules usually improves osseointegration in the osteoporotic condition, assessed mainly in rodent models. Clinical studies, mainly retrospective, have tested no functionalization strategies. Registered trademarks materials have been investigated and there is lack of information about the micro- or nano- topography of ceramics. Conclusions: Ceramic materials/coatings functionalization obtained promising results in improving implant osseointegration even in osteoporotic conditions but preclinical evidence has not been fully translated to clinical applications.

Tissue engineered bone mimetics to study bone disorders ex vivo: Role of bioinspired materials

Recent advances in materials development and tissue engineering has resulted in a substantial number of bioinspired materials that recapitulate cardinal features of bone extracellular matrix (ECM) such as dynamic inorganic and organic environment(s), hierarchical organization, and topographical features. Bone mimicking materials, as defined by its self-explanatory term, are developed based on the current understandings of the natural bone ECM during development, remodeling, and fracture repair. Compared to conventional plastic cultures, biomaterials that resemble some aspects of the native environment could elicit a more natural molecular and cellular response relevant to the bone tissue. Although current bioinspired materials are mainly developed to assist tissue repair or engineer bone tissues, such materials could nevertheless be applied to model various skeletal diseases in vitro. This review summarizes the use of bioinspired materials for bone tissue engineering, and their potential to model diseases of bone development and remodeling ex vivo. We largely focus on biomaterials, designed to re-create different aspects of the chemical and physical cues of native bone ECM. Employing these bone-inspired materials and tissue engineered bone surrogates to study bone diseases has tremendous potential and will provide a closer portrayal of disease progression and maintenance, both at the cellular and tissue level. We also briefly touch upon the application of patient-derived stem cells and introduce emerging technologies such as organ-on-chip in disease modeling. Faithful recapitulation of disease pathologies will not only offer novel insights into diseases, but also lead to enabling technologies for drug discovery and new approaches for cell-based therapies.

Feasibility evaluation of low-crystallinity β-tricalcium phosphate blocks as a bone substitute fabricated by a dissolution-precipitation reaction from α-tricalcium phosphate blocks

Although sintered β-tricalcium phosphate blocks have been used clinically as artificial bone substitutes, the crystallinity of β-tricalcium phosphate, which might dominate biocompatibility, is extremely high. The objective of this study is to evaluate the feasibility of fabricating low-crystallinity β-tricalcium phosphate blocks, which are expected to exhibit good biocompatibility via a dissolution-precipitation reaction of α-tricalcium phosphate blocks as a precursor under hydrothermal conditions at 200°C for 24 h. Although β-tricalcium phosphate is a metastable phase, the presence of Mg²⁺ in the reaction solution inhibits the formation of its corresponding stable phase and induces β-tricalcium phosphate formation under acidic conditions. It was found that low-crystallinity β-tricalcium phosphate blocks could be fabricated from α-tricalcium phosphate blocks immersed in 1.0 mol/L MgCl₂ + 0.1 mol/L NaH₂PO₄ solution while maintaining the shape of the α-tricalcium phosphate blocks. The crystallite size of the fabricated β-tricalcium phosphate blocks was 42 nm, which was substantially smaller than that of the sintered β-tricalcium phosphate blocks. When the fabricated β-tricalcium phosphate blocks were implanted into bone defects in rabbit femurs, they exhibited excellent tissue responses. In particular, the initial osteoconductivity (two and four weeks) was substantially greater than that of sintered β-tricalcium phosphate blocks.

Injectable TEMPO-oxidized nanofibrillated cellulose/biphasic calcium phosphate hydrogel for bone regeneration

Nanofibrillated cellulose, obtained from rice straw agricultural wastes was used as a substrate for the preparation of a new injectable and mineralized hydrogel for bone regeneration. Tetramethyl pyridine oxyl (TEMPO) oxidized nanofibrillated cellulose, was mineralized through the incorporation of a prepared and characterized biphasic calcium phosphate at a fixed ratio of 50 wt%. The TEMPO-oxidized rice straw nanofibrillated cellulose was characterized using transmission electron microscopy, Fourier transform infrared, and carboxylic content determination. The injectability and viscosity of the prepared hydrogel were evaluated using universal testing machine and rheometer testing, respectively. Cytotoxicity and alkaline phosphatase level tests on osteoblast like-cells for in vitro assessment of the biocompatibility were investigated. Results revealed that the isolated rice straw nanofibrillated cellulose is a nanocomposite of the cellulose nanofibers and silica nanoparticles. Rheological properties of the tested materials are suitable for use as injectable material and of nontoxic effect on osteoblast-like cells, as revealed by the positive alkaline phosphate assay. However, nanofibrillated cellulose/ biphasic calcium phosphate hydrogel showed higher cytotoxicity and lower bioactivity test results when compared to that of nanofibrillated cellulose.

Hydoxyapatite/beta-tricalcium phosphate biphasic ceramics as regenerative material for the repair of complex bone defects

Bone is a composite material composed of collagen and calcium phosphate (CaP) mineral. The collagen gives bone its flexibility while the inorganic material gives bone its resilience. The CaP in bone is similar in composition and structure to the mineral hydroxyapatite (HA) and is bioactive, osteoinductive and osteoconductive. Therefore synthetic versions of bone apatite (BA) have been developed to address the demand for autologous bone graft substitutes. Synthetic HA (s-HA) are stiff and strong, but brittle. These lack of physical attributes limit the use of synthetic apatites in situations where no physical loading of the apatite occurs. s-HA chemical properties differ from BA and thus change the physical and mechanical properties of the material. Consequently, s-HA is more chemically stable than BA and thus its resorption rate is slower than the rate of bone regeneration. One solution to this problem is to introduce a faster resorbing CaP, such as β-tricalcium phosphate (β-TCP), when synthesizing the material creating a biphasic (s-HA and β-TCP) formulation of calcium phosphate (BCP). The focus of this review is to introduce the major differences between BCP and biological apatites and how material scientists have overcome the inadequacies of the synthetic counterparts. Examples of BCP performance in vitro and in vivo following structural and chemical modifications are provided as well as novel ultrastructural data. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2493-2512, 2018.

Calcium supplementation decreases BCP-induced inflammatory processes in blood cells through the NLRP3 inflammasome down-regulation

Interaction of host blood with biomaterials is the first event occurring after implantation in a bone defect. This study aimed at investigating the cellular and molecular consequences arising at the interface between whole blood and biphasic calcium phosphate (BCP) particles. We observed that, due to calcium capture, BCP inhibited blood coagulation, and that this inhibition was reversed by calcium supplementation. Therefore, we studied the impact of calcium supplementation on BCP effects on blood cells. Comparative analysis of BCP and calcium supplemented-BCP (BCP/Ca) effects on blood cells showed that BCP as well as BCP/Ca induced monocyte proliferation, as well as a weak but significant hemolysis. Our data showed for the first time that calcium supplementation of BCP microparticles had anti-inflammatory properties compared to BCP alone that induced an inflammatory response in blood cells. Our results strongly suggest that the anti-inflammatory property of calcium supplemented-BCP results from its down-modulating effect on P2X7R gene expression and its capacity to inhibit ATP/P2X7R interactions, decreasing the NLRP3 inflammasome activation. Considering that monocytes have a vast regenerative potential, and since the excessive inflammation often observed after bone substitutes implantation limits their performance, our results might have great implications in terms of understanding the mechanisms leading to an efficient bone reconstruction.

STATEMENT OF SIGNIFICANCE

Although scaffolds and biomaterials unavoidably come into direct contact with blood during bone defect filling, whole blood-biomaterials interactions have been poorly explored. By studying in 3D the interactions between biphasic calcium phosphate (BCP) in microparticulate form and blood, we showed for the first time that calcium supplementation of BCP microparticles (BCP/Ca) has anti-inflammatory properties compared to BCP-induced inflammation in whole blood cells and provided information related to the molecular mechanisms involved. The present study also showed that BCP, as well as BCP/Ca particles stimulate monocyte proliferation. As monocytes represent a powerful target for regenerative therapies and as an excessive inflammation limits the performance of biomaterials in bone tissue engineering, our results might have great implications to improve bone reconstruction.

In Vitro Biocompatibility Assessment and In Vivo Behavior of a New Osteoconductive βTCP Bone Substitute

OBJECTIVE

Beta-tricalcium phosphate (βTCP) granules (OsproLife) exhibit a pure crystalline phase and a rough microporous surface for promoting cell adhesion and microsized intragranule porosity for improving wettability and resorption necessary for bone regeneration. OsproLife is a fully resorbable, space-maintaining, and osteoconductive synthetic material for the filling of bone defects. To asses OsproLife properties, a similar synthetic biomaterial, already on the market, has been chosen as reference: Cerasorb has the same chemical composition, but different crystal structure, surface morphology, and granule size. The aim of this study is to compare the properties of OsproLife and Cerasorb.

METHODS

Chemical purity, composition and physical properties, in vitro cytotoxicity, and in vivo bone performance in a rabbit model were analyzed. βTCP OsproLife granules (test) were compared with Cerasorb (control). Histological and μCT analyses were performed at 6, 12, and 56 weeks after implantation.

RESULTS

βTCP OsproLife and Cerasorb granules result to be both biocompatible and characterized by the same osteoconductivity and resorption rate.

CONCLUSION

βTCP OsproLife granules are a promising bone substitute for dental and orthopedic applications.

Biphasic calcium phosphate ceramics for bone reconstruction: A review of biological response

Autologous bone graft is considered as the gold standard in bone reconstructive surgery. However, the quantity of bone available is limited and the harvesting procedure requires a second surgical site resulting in severe complications. Due to these limits, scientists and clinicians have considered alternatives to autologous bone graft. Calcium phosphates (CaPs) biomaterials including biphasic calcium phosphate (BCP) ceramics have proven efficacy in numerous clinical indications. Their specific physico-chemical properties (HA/TCP ratio, dual porosity and subsequent interconnected architecture) control (regulate/condition) the progressive resorption and the bone substitution process. By describing the most significant biological responses reported in the last 30years, we review the main events that made their clinical success. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine.

STATEMENT OF SIGNIFICANCE

Nowadays, BCPs are definitely considered as the gold standard of bone substitutes in bone reconstructive surgery. Among the numerous clinical studies in literature demonstrating the performance of BCP, Passuti et al. and Randsford et al. studies largely contributed to the emergence of the BCPs. It could be interesting to come back to the main events that made their success and could explain their large adhesion from scientists to clinicians. This paper aims to review the most significant biological responses reported in the last 30years, of these BCP-based materials. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine.

ELABORATION AND EVALUATION OF A COMPOSITE BONE SUBSTITUTE BASED ON β-TCP/DCPD AND PHBV, PRELIMINARY RESULTS

Objective: In the present study, we investigate the biological performance of a calcium phosphate ceramics (CPC) bone substitute combined with poly-hydroxybutyrate-co-hydroxyvalerate (PHBV). Materials and Methods: A particulate CPC [45% beta-tricalcium phosphate ([Formula: see text]-TCP) and 55% of dihydrated dicalcium phosphate (DCPD)] was incorporated into a biodegradable copolymer PHBV. Two series of the composite, 1 and 2, with CPC–PHBV weight ratios of (40%–60% and 60%–40%), respectively, were prepared using chloroform for dissolving the polymer and a pressure molding process for shaping the composite samples. After particle size analysis, the two composites were characterized by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). In a second step, a 10[Formula: see text]mm bony segmental defect created in the tibias of 20 New Zealand White Rabbits was filled randomly with either composite 1 for group 1 or composite 2 for group 2. There were 10 animals in each group. Clinical, radiological and histological assessments were then carried out to evaluate the biological properties of developed CPC–PHBV composites. Results: For both variants of the developed CPC–PHBV biocomposite, there was evidence of osseous consolidation within three months. An in vivo investigation revealed the biological properties of the biocomposite, namely, biocompatibility, bioactivity, biodegradability and osteoconductivity. The morphological characteristics, granule size and chemical composition, were indeed found to be favorable for osseous cell development. This study likewise showed lower mortality for the variant with weight ratio (40%CPC–60%PHBV). Conclusion: An in vivo investigation revealed that the new biomaterial composed of CPC and PHBV exhibits manifest osteoconductivity and bioactivity with better degradation kinetics than the CPC. Moreover, the variant with 40%CPC/60%PHBV appeared more resistant to infection than the 60%CPC/40%PHBV which is an indicator of biocompatibility.

Effects of beta-tricalcium phosphate particles on primary cultured murine dendritic cells and macrophages

Beta-tricalcium phosphate (β-TCP) is widely used for bone substitution in clinical practice. Particles of calcium phosphate ceramics including β-TCP act as an inflammation mediators, which is an unfavorable characteristic for a bone substituent or a prosthetic coating material. It is thought that the stimulatory effect of β-TCP on the immune system could be utilized as an immunomodulator. Here, in vitro effects of β-TCP on primary cultured murine dendritic cells (DCs) and macrophages were investigated. β-TCP particles enhanced expression of costimulatory surface molecules, including CD86, CD80, and CD40 in DCs, CD86 in macrophages, and MHC class II and class I molecules in DCs. DEC205 and CCR7 were up-regulated in β-TCP-treated DCs. Production of cytokines and chemokines, including CCL2, CCL3, CXCL2, and M-CSF, significantly increased in DCs; CCL2, CCL3, CCL4, CCL5, CXCL2, and IL-11ra were up-regulated in macrophages. The results of the functional assays revealed that β-TCP caused a prominent reduction in antigen uptake by DCs, and that conditioned medium from DCs treated with β-TCP facilitated the migration of splenocytes in the transwell migration assay. Thus, β-TCP induced phenotypical and functional maturation/activation of DCs and macrophages; these stimulating effects may contribute to the observed in vivo effect where β-TCP induced extensive migration of immune cells. When compared to lipopolysaccharide (LPS), an authentic TLR ligand, the stimulatory effect of β-TCP on the immune systems is mild to moderate; however, it may have some advantages as a novel immunomodulator. This is the first report on the direct in vitro effects of β-TCP against bone marrow-derived DCs and macrophages.

Scaffolds for bone regeneration made of hydroxyapatite microspheres in a collagen matrix

Biomimetic scaffolds with a structural and chemical composition similar to native bone tissue may be promising for bone tissue regeneration. In the present work hydroxyapatite mesoporous microspheres (mHA) were incorporated into collagen scaffolds containing an ordered interconnected macroporosity. The mHA were obtained by spray drying of a nano hydroxyapatite slurry prepared by the precipitation technique. X-ray diffraction (XRD) analysis revealed that the microspheres were composed only of hydroxyapatite (HA) phase, and energy-dispersive x-ray spectroscopy (EDS) analysis revealed the Ca/P ratio to be 1.69 which is near the value for pure HA. The obtained microspheres had an average diameter of 6 μm, a specific surface area of 40 m(2)/g as measured by Brunauer-Emmett-Teller (BET) analysis, and Barrett-Joyner-Halenda (BJH) analysis showed a mesoporous structure with an average pore diameter of 16 nm. Collagen/HA-microsphere (Col/mHA) composite scaffolds were prepared by freeze-drying followed by dehydrothermal crosslinking. SEM observations of Col/mHA scaffolds revealed HA microspheres embedded within a porous collagen matrix with a pore size ranging from a few microns up to 200 μm, which was also confirmed by histological staining of sections of paraffin embedded scaffolds. The compressive modulus of the composite scaffold at low and high strain values was 1.7 and 2.8 times, respectively, that of pure collagen scaffolds. Cell proliferation measured by the MTT assay showed more than a 3-fold increase in cell number within the scaffolds after 15 days of culture for both pure collagen scaffolds and Col/mHA composite scaffolds. Attractive properties of this composite scaffold include the potential to load the microspheres for drug delivery and the controllability of the pore structure at various length scales.

Small-sized granules of biphasic bone substitutes support fast implant bed vascularization

The present study investigated the influence of granule size of 2 biphasic bone substitutes (BoneCeramic® 400–700 μm and 500–1000 μm) on the induction of multinucleated giant cells (MNGCs) and implant bed vascularization in a subcutaneous implantation model in rats. Furthermore, degradation mechanisms and particle phagocytosis of both materials were examined by transmission electron microscopy (TEM). Both granule types induced tissue reactions involving primarily mononuclear cells and only small numbers of MNGCs. Higher numbers of MNGCs were detected in the group with small granules starting on day 30, while higher vascularization was observed only at day 10 in this group. TEM analysis revealed that both mono- and multinucleated cells were involved in the phagocytosis of the materials. Additionally, the results allowed recognition of the MNGCs as the foreign body giant cell phenotype. Histomorphometrical analysis of the size of phagocytosed particles showed no differences between the 2 granule types. The results indicate that granule size seems to have impact on early implant bed vascularization and also on the induction of MNGCs in the late phase of the tissue reaction. Furthermore, the results revealed that a synthetic bone substitute material can induce tissue reactions similar to those of some xenogeneic materials, thus pointing to a need to elucidate their “ideal” physical characteristics. The results also show that granule size in the range studied did not alter phagocytosis by mononuclear cells. Finally, the investigation substantiates the differentiation of material-induced MNGCs, which are of the foreign body giant cell type.

Bone regeneration in calvarial defects in a rat model by implantation of human bone marrow-derived mesenchymal stromal cell spheroids

Mesenchymal stem cell (MSC) condensation contributes to membrane ossification by enhancing their osteodifferentiation. We investigated bone regeneration in rats using the human bone marrow-derived MSC-spheroids prepared by rotation culture, without synthetic or exogenous biomaterials. Bilateral calvarial defects (8 mm) were created in nude male rats; the left-sided defects were implanted with MSC-spheroids, β-tricalcium phosphate (β-TCP) granules, or β-TCP granules + MSC-spheroids, while the right-sided defects served as internal controls. Micro-computed tomography and immunohistochemical staining for osteocalcin/osteopontin indicated formation of new, full-thickness bones at the implantation sites, but not at the control sites in the MSC-spheroid group. Raman spectroscopy revealed similarity in the spectral properties of the repaired bone and native calvarial bone. Mechanical performance of the bones in the MSC-implanted group was good (50 and 60% those of native bones, respectively). All tests showed poor bone regeneration in the β-TCP and β-TCP + MSC-spheroid groups. Thus, significant bone regeneration was achieved with MSC-spheroid implantation into bone defects, justifying further investigation.

Bisphosphonate-adsorbed ceramic nanoparticles increase bone formation in an injectable carrier for bone tissue engineering

Sucrose acetate isobutyrate (SAIB) is a sugar-based carrier. We have previously applied SAIB as a minimally invasive system for the co-delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2) and found synergy when co-delivering zoledronic acid (ZA) and hydroxyapatite (HA) nanoparticles. Alternative bioceramics were investigated in a murine SAIB/rhBMP-2 injection model. Neither beta-tricalcium phosphate (TCP) nor Bioglass (BG) 45S5 had a significant effect on bone volume (BV) alone or in combination with the ZA. ¹⁴C-labelled ZA binding assays showed particle size and ceramic composition affected binding with nano-HA > micro-HA > TCP > BG. Micro-HA and nano-HA increased BV in a rat model of rhBMP-2/SAIB injection (+278% and +337%), and BV was further increased with ZA–adsorbed micro-HA and nano-HA (+530% and +889%). These data support the use of ZA–adsorbed nanoparticle-sized HA as an optimal additive for the SAIB/rhBMP-2 injectable system for bone tissue engineering.

Interlaboratory studies on in vitro test methods for estimating in vivo resorption of calcium phosphate ceramics

A potential standard method for measuring the relative dissolution rate to estimate the resorbability of calcium-phosphate-based ceramics is proposed. Tricalcium phosphate (TCP), magnesium-substituted TCP (MgTCP) and zinc-substituted TCP (ZnTCP) were dissolved in a buffer solution free of calcium and phosphate ions at pH 4.0, 5.5 or 7.3 at nine research centers. Relative values of the initial dissolution rate (relative dissolution rates) were in good agreement among the centers. The relative dissolution rate coincided with the relative volume of resorption pits of ZnTCP in vitro. The relative dissolution rate coincided with the relative resorbed volume in vivo in the case of comparison between microporous MgTCPs with different Mg contents and similar porosity. However, the relative dissolution rate was in poor agreement with the relative resorbed volume in vivo in the case of comparison between microporous TCP and MgTCP due to the superimposition of the Mg-mediated decrease in TCP solubility on the Mg-mediated increase in the amount of resorption. An unambiguous conclusion could not be made as to whether the relative dissolution rate is predictive of the relative resorbed volume in vivo in the case of comparison between TCPs with different porosity. The relative dissolution rate may be useful for predicting the relative amount of resorption for calcium-phosphate-based ceramics having different solubility under the condition that the differences in the materials compared have little impact on the resorption process such as the number and activity of resorbing cells.

STATEMENT OF SIGNIFICANCE

The evaluation and subsequent optimization of the resorbability of calcium phosphate are crucial in the use of resorbable calcium phosphates. Although the resorbability of calcium phosphates has usually been evaluated in vivo, establishment of a standard in vitro method that can predict in vivo resorption is beneficial for accelerating development and commercialization of new resorbable calcium phosphate materials as well as reducing use of animals. However, there are only a few studies to propose such an in vitro method within which direct comparison was carried out between in vitro and in vivo resorption. We propose here an in vitro method based on measuring dissolution rate. The efficacy and limitations of the method were evaluated by international round-robin tests as well as comparison with in vivo resorption studies for future standardization. This study was carried out as one of Versailles Projects on Advanced Materials and Standards (VAMAS).

Poly(vinyl alcohol) hydrogel coatings with tunable surface exposure of hydroxyapatite

Insufficient bone anchoring is a major limitation of artificial substitutes for connective osteoarticular tissues. The use of coatings containing osseoconductive ceramic particles is one of the actively explored strategies to improve osseointegration and strengthen the bone-implant interface for general tissue engineering. Our hypothesis is that hydroxyapatite (HA) particles can be coated robustly on specific assemblies of PVA hydrogel fibers for the potential anchoring of ligament replacements. A simple dip-coating method is described to produce composite coatings made of microscopic hydroxyapatite (HA) particles dispersed in a poly(vinyl alcohol) (PVA) matrix. The materials are compatible with the requirements for implant Good Manufacturing Practices. They are applied to coat bundles of PVA hydrogel fibers used for the development of ligament implants. By means of optical and electronic microscopy, we show that the coating thickness and surface state can be adjusted by varying the composition of the dipping solution. Quantitative analysis based on backscattered electron microscopy show that the exposure of HA at the coating surface can be tuned from 0 to over 55% by decreasing the weight ratio of PVA over HA from 0.4 to 0.1. Abrasion experiments simulating bone-implant contact illustrate how the coating cohesion and wear resistance increase by increasing the content of PVA relative to HA. Using pullout experiments, we find that these coatings adhere well to the fiber bundles and detach by propagation of a crack inside the coating. These results provide a guide to select coated implants for anchoring artificial ligaments.

In Vivo Osteogenic Potential of Biomimetic Hydroxyapatite/Collagen Microspheres: Comparison with Injectable Cement Pastes

The osteogenic capacity of biomimetic calcium deficient hydroxyapatite microspheres with and without collagen obtained by emulsification of a calcium phosphate cement paste has been evaluated in an in vivo model, and compared with an injectable calcium phosphate cement with the same composition. The materials were implanted into a 5 mm defect in the femur condyle of rabbits, and bone formation was assessed after 1 and 3 months. The histological analysis revealed that the cements presented cellular activity only in the margins of the material, whereas each one of the individual microspheres was covered with osteogenic cells. Consequently, bone ingrowth was enhanced by the microspheres, with a tenfold increase compared to the cement, which was associated to the higher accessibility for the cells provided by the macroporous network between the microspheres, and the larger surface area available for osteoconduction. No significant differences were found in terms of bone formation associated with the presence of collagen in the materials, although a more extensive erosion of the collagen-containing microspheres was observed.

Evaluation of new bone formation in irradiated areas using association of mesenchymal stem cells and total fresh bone marrow mixed with calcium phosphate scaffold

The consequences of the treatment of the squamous cell carcinomas of the upper aerodigestive tract (bone removal and external radiation therapy) are constant. Tissue engineering using biphasic calcium phosphate (BCP) and mesenchymal stem cells (MSC) is considered as a promising alternative. We previously demonstrated the efficacy of BCP and total fresh bone marrow (TBM) in regenerating irradiated bone defect. The aim of this study was to know if adding MSC to BCP + TBM mixture could improve the bone formation in irradiated bone defects. Twenty-four Lewis 1A rats received a single dose of 20 Gy to the hind limbs. MSC were sampled from non-irradiated donors and amplified in proliferative, and a part in osteogenic, medium. 3 weeks after, defects were created on femurs and tibias, which were filled with BCP alone, BCP + TBM, BCP + TBM + uncommitted MSC, or BCP + TBM + committed MSC. 3 weeks after, samples were removed and prepared for qualitative and quantitative analysis. The rate of bone ingrowth was significantly higher after implantation of BCP + TBM mixture. The adding of a high concentration of MSC, committed or not, didn't improve the bone regeneration. The association BCP + TBM remains the most efficient material for bone substitution in irradiated areas.

Incorporation of RANKL promotes osteoclast formation and osteoclast activity on β-TCP ceramics

β-Tricalcium phosphate (β-TCP) ceramics are approved for the repair of osseous defects. In large defects, however, the substitution of the material by authentic bone is inadequate to provide sufficient long-term mechanical stability. We aimed to develop composites of β-TCP ceramics and receptor activator of nuclear factor κ-B ligand (RANKL) to enhance the formation of osteoclasts and promote cell mediated calcium phosphate resorption. RANKL was adsorbed superficially onto β-TCP ceramics or incorporated into a crystalline layer of calcium phosphate by the use of a co-precipitation technique. Murine osteoclast precursors were seeded onto the ceramics. After 15 days, the formation of osteoclasts was quantified cytologically and colorimetrically with tartrate-resistant acidic phosphatase (TRAP) staining and TRAP activity measurements, respectively. Additionally, the expression of transcripts encoding the osteoclast gene products cathepsin K, calcitonin receptor, and of the sodium/hydrogen exchanger NHA2 were quantified by real-time PCR. The activity of newly formed osteoclasts was evaluated by means of a calcium phosphate resorption assay. Superficially adsorbed RANKL did not induce the formation of osteoclasts on β-TCP ceramics. When co-precipitated onto β-TCP ceramics RANKL supported the formation of mature osteoclasts. The development of osteoclast lineage cells was further confirmed by the increased expression of cathepsin K, calcitonin receptor, and NHA2. Incorporated RANKL stimulated the cells to resorb crystalline calcium phosphate. Our in vitro study shows that RANKL incorporated into β-TCP ceramics induces the formation of active, resorbing osteoclasts on the material surface. Once formed, osteoclasts mediate the release of RANKL thereby perpetuating their differentiation and activation. In vivo, the stimulation of osteoclast-mediated resorption may contribute to a coordinated sequence of material resorption and bone formation. Further in vivo studies are needed to confirm the current in vitro findings.

Osteoblast attachment to hydroxyapatite micro-tube scaffolds

Tissue engineering offers a novel route for repairing damaged or diseased tissue by incorporating the patient's own healthy cells or donated cells into temporary scaffolds that act as a matrix for cell cultivation. Tissue scaffolds that are biocompatible and are porous with interconnected porous channels for cell ingrowth with a suitable degradation rate would be advantageous. In this study hydroxyapatite micro-tubes produced using the biomimetic coating technique will be pressed into a tissue scaffold. A compaction and sintering study will be done to observe appropriate pressure and heat treatment to produce a mechanically stable scaffold material. The ideal pressure was found to be 2.5 MPa where the tube-like structure was maintained, high porosity was achieved and suitable strength was possible. Sintering between 1,000 and 1,100 °C was found to produce good results. The average porosity for the chosen pressure of 2.5 MPa was 68%. The scaffold was observed with SEM, micro tomography (micro-CT), chemical analysis and degradation testing. Porous channels were established using micro-CT where the porous channels were roughly 100 µm. Chemical analysis showed constant release of calcium and phosphorous, and far below toxic levels of heavy metals from the die. Degradation testing showed high degradation compared to tested commercially available materials. Cell culturing was done on the scaffold to characterise the biological performance of the scaffolds. Cell culturing was done in a 7 and 24 day cell culture to examine cell morphology and cell ingrowth. The results showed cell ingrowth into a micro-tube and cell orientation in a longitudinal direction. SEM, confocal microscopy and histology were employed as characterisation tools for observing cell ingrowth.

Effect of phase composition on protein adsorption and osteoinduction of porous calcium phosphate ceramics in mice

The purpose of this study was to investigate the effect of phase compositions of porous calcium phosphate (CaP) ceramics on their protein adsorption behaviors in vitro and osteoinductive potentials in vivo in mice. Under competitive conditions, a high adsorption of bone morphogenetic protein 2 (BMP-2) was observed at a high initial concentration of BMP-2 in the multi-protein solution on all the four types of ceramics, indicating their strong affinity for BMP-2. No significant difference in BMP-2 adsorption between the ceramics was noted, indicating that phase composition could have little influence on BMP-2 adsorption. After implantation into the thigh muscles of mice for 45 and 90 days, the histological and histomorphometric analyses showed that porous biphasic calcium phosphate (BCP) ceramic consisting of 30% hydroxyapatite HA and 70% tricalcium phosphate (β-TCP), i.e. BCP-2 had stronger osteoinductive ability than the other three groups of ceramics. The immunohistochemical staining showed the highest expression of BMP-2 and osteocalcin (OCN) in BCP-2 group. Osteoinduction of porous CaP ceramics might be influenced by the amount of BMP-2 present in the local microenvironment in the implant, which was regulated by the phase composition of the ceramics. BCP-2 promoted the highest expression of BMP-2 and then showed the strongest osteoinduction in mice.

Inflammatory cell response to calcium phosphate biomaterial particles: an overview

Bone is a metabolically active and highly organized tissue consisting of a mineral phase of hydroxyapatite (HA) and amorphous calcium phosphate (CaP) crystals deposited in an organic matrix. One objective of bone tissue engineering is to mimic the chemical and structural properties of this complex tissue. CaP ceramics, such as sintered HA and beta-tricalcium phosphate, are widely used as bone substitutes or prosthesis coatings because of their osteoconductive properties. These ceramic interactions with tissues induce a cell response that can be different according to the composition of the material. In this review, we discuss inflammatory cell responses to CaP materials to provide a comprehensive overview of mechanisms governing the integration or loosening of implants, which remains a major concern in tissue engineering. A focus on the effects of the functionalization of CaP biomaterials highlights potential ways to increase tissue integration and limit rejection processes.

A new platelet cryoprecipitate glue promoting bone formation after ectopic mesenchymal stromal cell-loaded biomaterial implantation in nude mice

Introduction

This study investigated the promising effect of a new Platelet Glue obtained from Cryoprecipitation of Apheresis Platelet products (PGCAP) used in combination with Mesenchymal Stromal Cells (MSC) loaded on ceramic biomaterials to provide novel strategies enhancing bone repair.

Methods

PGCAP growth factor content was analyzed by ELISA and compared to other platelet and plasma-derived products. MSC loaded on biomaterials (65% hydroxyapatite/35% beta-TCP or 100% beta-TCP) were embedded in PGCAP and grown in presence or not of osteogenic induction medium for 21 days. Biomaterials were then implanted subcutaneously in immunodeficient mice for 28 days. Effect of PGCAP on MSC was evaluated in vitro by proliferation and osteoblastic gene expression analysis and in vivo by histology and immunohistochemistry.

Results

We showed that PGCAP, compared to other platelet-derived products, allowed concentrating large amount of growth factors and cytokines which promoted MSC and osteoprogenitor proliferation. Next, we found that PGCAP improves the proliferation of MSC and osteogenic-induced MSC. Furthermore, we demonstrated that PGCAP up-regulates the mRNA expression of osteogenic markers (Collagen type I, Osteonectin, Osteopontin and Runx2). In vivo, type I collagen expressed in ectopic bone-like tissue was highly enhanced in biomaterials embedded in PGCAP in the absence of osteogenic pre-induction. Better results were obtained with 65% hydroxyapatite/35% beta-TCP biomaterials as compared to 100% beta-TCP.

Conclusions

We have demonstrated that PGCAP is able to enhance in vitro MSC proliferation, osteoblastic differentiation and in vivo bone formation in the absence of osteogenic pre-induction. This clinically adaptable platelet glue could be of interest for improving bone repair.

Biphasic, triphasic and multiphasic calcium orthophosphates

Biphasic, triphasic and multiphasic (polyphasic) calcium orthophosphates have been sought as biomaterials for reconstruction of bone defects in maxillofacial, dental and orthopedic applications. In general, this concept is determined by advantageous balances of more stable (frequently hydroxyapatite) and more resorbable (typically tricalcium orthophosphates) phases of calcium orthophosphates, while the optimum ratios depend on the particular applications. Therefore, all currently known biphasic, triphasic and multiphasic formulations of calcium orthophosphate bioceramics are sparingly soluble in water and, thus, after being implanted they are gradually resorbed inside the body, releasing calcium and orthophosphate ions into the biological medium and, hence, seeding new bone formation. The available formulations have already demonstrated proven biocompatibility, osteoconductivity, safety and predictability in vitro, in vivo, as well as in clinical models. More recently, in vitro and in vivo studies have shown that some of them might possess osteoinductive properties. Hence, in the field of tissue engineering biphasic, triphasic and multiphasic calcium orthophosphates represent promising biomaterials to construct various scaffolds capable of carrying and/or modulating the behavior of cells. Furthermore, such scaffolds are also suitable for drug delivery applications. This review summarizes the available information on biphasic, triphasic and multiphasic calcium orthophosphates, including their biomedical applications. New formulations are also proposed.

Macrophage and osteoblast responses to biphasic calcium phosphate microparticles

The aim of this work was to investigate in vitro the biological events leading to ectopic bone formation in contact with microporous biphasic calcium phosphate (BCP) ceramics. After implantation, microparticles may arise from their degradation and induce an inflammatory response involving macrophages. The secretion of pro-inflammatory cytokines may affect the differentiation of osteoblasts. Mouse macrophage-like (J774) and osteoblast-like (MC3T3-E1) cells were cultured in the presence of BCP microparticles of different sizes (<20, 40-80, or 80-200 microm). The smallest microparticles decreased the viability of both cell types as measured with LDH and methyl tetrazolium salt assays, and enhanced the secretion of pro-inflammatory cytokines (IL-6 and TNF-alpha) by macrophages after 24 h, as revealed by ELISA. Osteoblastic cells were then cultured for 96 h in the presence of these pro-inflammatory cytokines and their differentiation studied by RT-PCR. MC3T3-E1 cells cultured with TNF-alpha showed a decrease in osterix, PTH receptor (PTHR1), and osteocalcin gene expression. On the contrary, IL-6 enhanced the expression of osterix, Runx2, alkaline phosphatase, and osteocalcin compared with plastic. In conclusion, this study shows that the inflammatory response initiated by BCP microparticles may have both detrimental and beneficial effects on osteogenesis.

Effects of high doses of ionising radiation on bone in rats: a new model for evaluation of bone engineering

The purpose of this study was to assess the effects of high doses of ionising radiation on the histology and healing of bone in an experimental model of 12 inbred rats. Ten of the rats had external irradiation of a single dose of 30 or 45 Gy on the hind limbs, which is equivalent to 2 or 3 times the routine doses used for treatment in humans. Three weeks later, two bony defects were created on their left sides, and the animals were killed 12 or 18 weeks after irradiation. Decalcified bony specimens were studied with light microscopy for qualitative analysis. Thirty Gy irradiation induced medullar oedema or fibro-oedema and normal or fibrous healing of the defects. Forty-five Gy induced medullar oedema or fibro-oedema and depletion in bone marrow. In addition, pathological healing of the defects was obvious and characterised by oedema, fibrosis, and necrosis. In this study high doses of ionising radiation modified the histology of bone, particularly into fibro-oedema, and delayed healing. This new animal model could be used to evaluate the capacities of tissue-engineered materials to repair bony defects after irradiation and osteoradionecrosis.

Morphometric immunohistochemical examination of the inflammatory tissue reaction after implantation of calcium phosphate-coated titanium plates in rats

Calcium phosphate (CaP) preparations are established coatings for titanium-based medical implants used for bone reconstruction. However, biodegradation of the coating can result in microparticles that subsequently cause inflammatory reactions. The present study was therefore aimed at investigating the inflammatory response to two series of CaP-coated titanium plates: Ti-brushite (Ti-B) and Ti-hydroxyapatite (Ti-H) implants. Fifteen male LEW.1A rats received one plate of each series and a pellet (5 x 2 mm) of sol-gel derived silica/CaP (SCP implants) implanted into the back musculature. After 7, 14 and 28 days, five rats were killed and the implants were removed with the surrounding tissue. Quantitative immunohistochemistry was performed on frozen sections. Total monocytes/macrophages, tissue macrophages, T-cells, MHC-class-II-positive cells and proliferating cells were counted. For the Ti-B implants, the number of monocytes/macrophages remained constant while the other cell populations increased. In contrast, for the Ti-H implants the number of monocytes/macrophages decreased while the other cell populations remained constant. The SCP implants demonstrated degradation and scattering into smaller particles with an increase for all cell populations except the proliferating cells. Human mesenchymal stem cells demonstrated adherence and a flat morphology on Ti-B and Ti-H implants and no remarkable difference between both implants. Taken together, the in vivo data demonstrate that the short-term inflammatory response against a hydroxyapatite coating is lower in comparison to a brushite coating, and that the morphology of cells growing in vitro is similar on both layers.

Bioactive materials in endodontics

Endodontic treatment in dentistry is a delicate procedure and many treatment attempts fail. Despite constant development of new root canal filling techniques, the clinician is confronted with both a complex root canal system and the use of filling materials that are harmful for periapical tissues. This paper evaluates reported studies on biomaterials used in endodontics, including calcium hydroxide, mineral trioxide aggregate, calcium phosphate ceramics and calcium phosphate cements. Special emphasis is made on promising new biomaterials, such as injectable bone substitute and injectable calcium phosphate cements. These materials, which combine biocompatibility, bioactivity and rheological properties, could be good alternatives in endodontics as root canal fillers. They could also be used as drug-delivery vehicles (e.g., for antibiotics and growth factors) or as scaffolds in pulp tissue engineering.

In vivo response of bioactive PMMA-based bone cement modified with alkoxysilane and calcium acetate

The use of polymethylmethacrylate (PMMA)-based bone cement is popular in orthopedics for the fixation of artificial joints with bone. However, it has a major problem with prostheses loosening because of coverage by fibrous tissue after long-term implantation. Recently, a bioactive bone cement has been developed that shows direct bonding to living bone through modification of PMMA resin with gamma-methacryloxypropyltrimethoxysilane (MPS) and calcium acetate. The cement is designed to exhibit bioactivity, through incorporation of silanol groups and calcium ions. Thus, it has the potential to form a layer of bone-like hydroxyapatite, which is essential for achieving direct bonding to living bone. This type of modification allows the cement to show spontaneous hydroxyapatite formation on its surface in a simulated body fluid after one day, and there is evidence of osteoconduction of the cement in rabbit tibia for periods of more than three weeks. However, the influence of the dissolved ions from the modified cement has not yet been clarified. Thus, the authors focused on the dissolution of the modified PMMA-based bone cement and its tissue response in muscle and bone by comparison with the behavior of non-modified PMMA-based bone cement. One week after implantation in the latissimus dorsi of a rabbit, the modified PMMA-based bone cement showed more inflammatory width than the commercial cement. However, four weeks after implantation, the inflammatory width of both cements was essentially the same. The osteoconductivity around the modified cement was higher than that for the conventional cement after four weeks implantation. These results indicate that the initial dissolution of calcium acetate from the modified cement to form the hydroxyapatite induced the acute inflammation around tissue, but also developed the osteoconductivity. It is suggested that the initial inflammation can be effective for inducing osteoconduction through a bone healing reaction when the material provides an environment that promotes bone formation.

Preparation of porous apatite granules from calcium phosphate cement

A versatile method for preparing spherical, micro- and macroporous (micro: 2-10 and macro: 150-550 microm pores), carbonated apatitic calcium phosphate (Ap-CaP) granules (2-4 mm in size) was developed by using NaCl crystals as the porogen. The entire granule production was performed between 21 and 37 degrees C. A CaP cement powder, comprising alpha-Ca3(PO4)2 (61 wt.%), CaHPO4 (26%), CaCO3 (10%) and precipitated hydroxyapatite, Ca10(PO4)6(OH)2 (3%), was dry mixed with NaCl crystals varying in size from 420 microm to 1 mm. Cement powder (35 wt.%) and NaCl (65 wt.%) mixture was kneaded with an ethanol-Na2HPO4 initiator solution, and the formed dough was immediately agitated on an automatic sieve shaker for a few minutes to produce the spherical granules. Embedded NaCl crystals were then leached out of the granules by soaking them in deionized water. CaP granules were micro- and macroporous with a total porosity of 50% or more. Granules were composed of carbonated, poorly crystallized, apatitic CaP phase. These were the first spherical and porous CaP granules ever produced from a self-setting calcium phosphate cement. The granules reached their final handling strength at the ambient temperature through the cement setting reaction, without having a need for sintering.