The effect of different solvents on the ATP/ADP content and growth properties of HeLa cells

Suspension of micro- and nanoplastic test materials: Liquid compatibility, (bio)surfactants, toxicity and environmental relevance

Micro- and nanoplastics have been detected in environmental compartments from the highest mountains to the deepest seas. They have been shown to be present at almost all trophic levels, and within humans they have been detected in numerous organs and human stool. Whilst their ubiquitous nature is indisputable, little is known about the health risks they may present. Much current research is focussed on the production of test materials with which to perform the necessary health studies. An important aspect of this is the correct storage and suspension of the materials to ensure they remain stable both chemically and with regards to size and shape. In this review, we look at the chemical stability of nine common polymers in a range of liquids; first with the use of commercial compatibility charts and then with a more quantitative approach using Hansen solubility parameters. We then look at stability with regards to particle agglomeration, whether and how stable compositions can be predicted, and which dispersants can be added to increase stability. Finally, we discuss the role of bio-surfactants and the eco-corona and how these may offer a route to both better stability and environmental relevance.

Microstructural Characterization of PCL-HA Bone Scaffolds Based on Nonsolvent-Induced Phase Separation

Composite materials containing pores play a crucial role in the field of bone tissue engineering. The nonsolvent-induced phase separation (NIPS) technique, commonly used for manufacturing membranes, has proven to be an effective method for fabricating composite scaffolds with tunable porosity. To explore this potential, we produced 10% (w/v) poly(caprolactone) (PCL)-nanohydroxyapatite (HA) composite porous film scaffolds with varying HA contents (0/10/15/20 wt %) and two thicknesses (corresponding to 1 and 2 mL of solution resulting in 800-900 and 1600-1800 μm thickness, respectively) using the NIPS method. We conducted a comprehensive analysis of how the internal microstructure and surface characteristics of these scaffolds varied based on their composition and thickness. In particular, for each scaffold, we analyzed overall porosity, pore size distribution, pore shape, and degree of anisotropy as well as mechanical behaviors. Micro-CT and SEM analyses revealed that PCL-HA scaffolds with various HA contents possessed micro (<100 μm) scale porosity due to the NIPS method. Greater thicknesses typically resulted in larger average pore sizes and greater overall porosity. However, unlike in thinner scaffolds, greater/higher HA content did not exhibit a direct correlation with a greater pore size for thicker scaffolds. In thinner scaffolds, adding HA above an effective threshold content of 15 wt % and beyond did lead to a greater pore size. The higher pore anisotropy was in line with the higher HA content for both groups. SEM images demonstrated that both groups showed highly uniformly distributed internal microporous morphology regardless of HA content and thickness. The results suggest that NIPS-based scaffolds hold promise for bone tissue engineering but that the optimal HA content and thickness should be carefully considered based on desired porosity and application.

Dicalcium Phosphate Dihydrate Mineral Loaded Freeze-Dried Scaffolds for Potential Synthetic Bone Applications

Dicalcium Phosphate Dihydrate (DCPD) mineral scaffolds alone do not possess the mechanical flexibility, ease of physicochemical properties' tuneability or suitable porosity required for regenerative bone scaffolds. Herein, we fabricated highly porous freeze-dried chitosan scaffolds embedded with different concentrations of Dicalcium Phosphate Dihydrate (DCPD) minerals, i.e., 0, 20, 30, 40 and 50 (wt)%. Increasing DCPD mineral concentration led to increased scaffold crystallinity, where the % crystallinity for CH, 20, 30, 40, and 50-DCPD scaffolds was determined to be 0.1, 20.6, 29.4, 38.8 and 69.9%, respectively. Reduction in scaffold pore size distributions was observed with increasing DCPD concentrations of 0 to 40 (wt)%; coalescence and close-ended pore formation were observed for 50-DCPD scaffolds. 50-DCPD scaffolds presented five times greater mechanical strength than the DCPD mineral-free scaffolds (CH). DCPD mineral enhanced cell proliferation for the 20, 30 and 40-DCPD scaffolds. 50-DCPD scaffolds presented reduced pore interconnectivity due to the coalescence of many pores in addition to the creation of closed-ended pores, which were found to hinder osteoblast cell proliferation.

The Role of Lipid Rafts and Membrane Androgen Receptors in Androgen’s Neurotoxic Effects

Sex differences have been observed in multiple oxidative stress–associated neurodegenerative diseases. Androgens, such as testosterone, can exacerbate oxidative stress through a membrane androgen receptor (mAR), AR45, localized to lipid rafts in the plasma membrane. The goal of this study is to determine if interfering with mAR localization to cholesterol-rich lipid rafts decreases androgen induced neurotoxicity under oxidative stress environments. We hypothesize that cholesterol-rich caveolar lipid rafts are necessary for androgens to induce oxidative stress generation in neurons via the mAR localized within the plasma membrane. Nystatin was used to sequester cholesterol and thus decrease cholesterol-rich caveolar lipid rafts in a neuronal cell line (N27 cells). Nystatin was applied prior to testosterone exposure in oxidatively stressed N27 cells. Cell viability, endocytosis, and protein analysis of oxidative stress, apoptosis, and mAR localization were conducted. Our results show that the loss of lipid rafts via cholesterol sequestering blocked androgen-induced oxidative stress in cells by decreasing the localization of mAR to caveolar lipid rafts.

Reciprocal Modulation of Antiretroviral Drug and Steroid Receptor Function In Vitro

Millions of women are exposed simultaneously to antiretroviral drugs (ARVs) and progestin-based hormonal contraceptives. Yet the reciprocal modulation by ARVs and progestins of their intracellular functions is relatively unexplored. We investigated the effects of tenofovir disoproxil fumarate (TDF) and dapivirine (DPV), alone and in the presence of select steroids and progestins, on cell viability, steroid-regulated immunomodulatory gene expression, activation of steroid receptors, and anti-HIV-1 activity in vitro Both TDF and DPV modulated the transcriptional efficacy of a glucocorticoid agonist via the glucocorticoid receptor (GR) in the U2OS cell line. In TZM-bl cells, DPV induced the expression of the proinflammatory interleukin 8 (IL-8) gene while TDF significantly increased medroxyprogesterone acetate (MPA)-induced expression of the anti-inflammatory glucocorticoid-induced leucine zipper (GILZ) gene. However, peripheral blood mononuclear cell (PBMC) and ectocervical explant tissue viability and gene expression results, along with TZM-bl HIV-1 infection data, are reassuring and suggest that TDF and DPV, in combination with dexamethasone (DEX) or MPA, do not reciprocally modulate key biological effects in primary cells and tissue. We show for the first time that TDF induces progestogen-independent activation of the progesterone receptor (PR) in a cell line. The ability of TDF and DPV to influence GR and PR activity suggests that their use may be associated with steroid receptor-mediated off-target effects. This, together with cell line and individual donor gene expression responses in the primary models, raises concerns that reciprocal modulation may cause side effects in a cell- and donor-specific manner in vivo.

Cyrene™ is a green alternative to DMSO as a solvent for antibacterial drug discovery against ESKAPE pathogens

Dimethyl sulfoxide (DMSO) is currently employed across the biomedical field, from cryopreservation to in vitro assays, despite the fact that it has been shown to have an assortment of biologically relevant effects. The amphiphilic nature of DMSO along with its relatively low toxicity at dilute concentrations make it a challenging solvent to replace. A possible alternative is Cyrene™ (dihydrolevoglucosenone), an aprotic dipolar solvent that is derived from waste biomass. In addition to being a green solvent, Cyrene™ has comparable solvation properties and is reported to have low toxicity. Herein the abilities of the two solvents to solubilize drug compounds and to act as non-participatory vehicles in drug discovery for antibacterials are compared. It was demonstrate that the results of standardised antimicrobial susceptibility testing do not differ between drugs prepared from either Cyrene™ or DMSO stock. Moreover, in contrast to DMSO, Cyrene™ does not offer protection from ROS mediated killing of bacteria and may therefore be an improvement over DMSO as a vehicle in antimicrobial drug discovery.

Shutting Down Shigella Secretion: Characterizing Small Molecule Type Three Secretion System ATPase Inhibitors

Many important human pathogens rely on one or more type three secretion systems (T3SSs) to inject bacterial effector proteins directly into the host cell cytoplasm. Secretion of protein through the needlelike type three secretion apparatus (T3SA) is essential for pathogen virulence and relies on a highly conserved ATPase at the base of the apparatus, making it an attractive target for anti-infective therapeutics. Here, we leveraged the ability to purify an active oligomeric Shigella T3SS ATPase to provide kinetic analyses of three T3SS ATPase inhibitors of Spa47. In agreement with in silico docking simulations, the inhibitors displayed noncompetitive inhibition profiles and efficiently reduced Spa47 ATPase activity with IC₅₀s as low as 52 ± 3 μM. Two of the inhibitors functioned well in vivo, nearly abolishing effector protein secretion without significantly affecting the Shigella growth phenotype or HeLa cell viability. Furthermore, characterization of Spa47 complexes in vitro and Shigella T3SA formation in vivo showed that the inhibitors do not function through disruption of Spa47 oligomers or by preventing T3SA formation. Together, these findings suggest that inhibitors targeting Spa47 may be an effective means of combating Shigella infection by shutting down type three secretion without preventing presentation of the highly antigenic T3SA tip proteins that aid in clearing the infection and developing pan- Shigella immunological memory. In summary, this is the first report of Shigella T3SS ATPase inhibitors and one of only a small number of studies characterizing T3SS ATPase inhibition in general. The work presented here provides much-needed insight into T3SS ATPase inhibition mechanisms and provides a strong platform for developing and evaluating non-antibiotic therapeutics targeting Spa47 and other T3SS ATPases.

Effect of storage time and temperature on cell cycle analysis by mass cytometry

Cell cycle analysis is a recognized and important application of flow cytometry and, more recently, mass cytometry (MCM). Both technologies have been utilized for analysis of the cell cycle state of ex vivo samples from patients with hematologic malignancies. Clinical samples are frequently stored for hours at room temperature or cryogenically frozen before processing and analysis; however, how these processing methods alter cell cycle state is not well described. To understand how storage time and temperature affect the analysis of cell cycle distribution by MCM, two leukemia cell lines, HL-60 and MOLM13, and primary human cells from three human bone marrow aspirates were stored and frozen under a variety of conditions that are likely to be encountered in a clinical setting. Our findings indicate that short delays in sample processing (less than 1 h), have little to no effect on cell cycle distribution, while longer delays or cryopreservation cause significant disruptions to the cell cycle fraction characterized by consistent reductions in IdU incorporation and variable alterations in other cell cycle phases. Analysis of the recovery of cryopreserved leukemia cell lines and marrow cells demonstrated that cell cycle alterations persist for at least 48 h after thawing. Our findings demonstrate that accurate cell cycle analysis requires that samples be processed rapidly after collection, and that cryopreservation significantly alters cell cycle fractions. Measurement of IdU incorporation was the most sensitive to both delays in processing and cryopreservation, while estimation of the total cycling cell fraction using Ki-67 or phosphorylated retinoblastoma protein were least altered by the conditions tested. These findings provide guidance for the ideal approach to collection of samples for cell cycle analysis and can aid interpretation of cell cycle data from samples that cannot be collected under ideal circumstances. © 2018 International Society for Advancement of Cytometry.

Mitochondrial morphology and function impaired by dimethyl sulfoxide and dimethyl Formamide

In this work, the effects of two non-ionic, non-hydroxyl organic solvents, dimethyl sulfoxide (DMSO) and dimethyl formamide (DMF) on the morphology and function of isolated rat hepatic mitochondria were investigated and compared. Mitochondrial ultrastructures impaired by DMSO and DMF were clearly observed by transmission electron microscopy. Spectroscopic and polarographic results demonstrated that organic solvents induced mitochondrial swelling, enhanced the permeation to H⁺/K⁺, collapsed the potential inner mitochondrial membrane (IMM), and increased the IMM fluidity. Moreover, with organic solvents addition, the outer mitochondrial membrane (OMM) was broken, accompanied with the release of Cytochrome c, which could activate cell apoptosis signaling pathway. The role of DMSO and DMF in enhancing permeation or transient water pore formation in the mitochondrial phospholipid bilayer might be the main reason for the mitochondrial morphology and function impaired. Mitochondrial dysfunctions induced by the two organic solvents were dose-dependent, but the extents varied. Ethanol (EtOH) showed the highest potential damage on the mitochondrial morphology and functions, followed by DMF and DMSO.

A novel potential role of pituitary gonadotropins in the pathogenesis of human colorectal cancer

Background

Colorectal cancer (CRC) is a leading cause of death in the western world, and its incidence increases with patient age. It is also known that with age there occur changes in the levels of certain hormones, including an increase in the secretion of pituitary gonadotropins (PtGs) as a result of the loss of gonadal hormone feedback. We recently reported that functional PtG receptors are expressed in human lung cancer cells, rhabdomyosarcoma cells, and malignant hematopoietic stem cells.

Findings

Here we report for the first time that the receptors for follicle-stimulating hormone (FSH) and luteinizing hormone (LH) are expressed in primary tumor samples isolated from CRC patients as well as in the established human CRC cell lines HTC116 and HTB37. Moreover, we also report that PtGs stimulate chemotaxis, adhesion, and proliferation of these cell lines.

Conclusions

Our results suggest that PtGs play an important and underappreciated role in CRC pathogenesis, and we call for further studies to better define their role in gastrointestinal malignancies and their direct effect on putative CRC cancer stem cells.

MICAN, a new fluorophore for vital and non-vital staining of human cells

Fluorescence time-lapse microscopy is in connection with the invasive properties of fluorochrome applied, and with the toxicity of the excitation energy and wavelength of the dye itself. Experiments with the newly synthesized fluorescent dye 1-N-methylamino-5-isocyanonaphthalene (MICAN) served to test its cytotoxicity on human HaCaT keratinocyte cell cultures. Experiments related to staining capability were performed with paraformaldehyde (PFA) fixed cells and observed with fluorescence microscope. It was assumed that the fluorophore 1-amino-5-isocyanonaphthalene (ICAN) and especially its N-methylamino derivative MICAN, containing condensed aromatic rings could serve as a nonselective fluorescent dye capable to stain cellular structures of fixed, living, damaged and dead cells. This notion was confirmed by the MICAN staining of cytoplasmic proteins primarily rough endoplasmic reticulum (RER), smooth endoplasmic reticulum (SEM) and less efficiently nuclear proteins suggesting the involvement of staining of subcellular structures involved in protein synthesis. MICAN was not only well tolerated by living cells but turned out to be a strong heterochromatin and RER staining agent. This led to the development of a MICAN staining protocol for native and living samples. Relative to other fluorescent dyes, MICAN is not only useful but also cost-effective. Toxicology tests were performed using 30, 10, 5, 0.5 μg/ml MICAN concentrations. Time-lapse videomicroscopy at near-infrared (NIR) illumination has been used for the examination of MICAN effect on cell division. It was found that MICAN as a vital stain had no significant harmful effect on HaCaT cells. MICAN turned out to be a non-toxic, highly quantum-efficient vital stain with minimal, or no photobleaching, and can be applied to co-stain with propidium-iodide due the strong spectral separation.

Synthesis, characterisation and in vitro cytotoxicity of mixed ligand Pt(ii) oxadiazoline complexes with hexamethylenetetramine and 7-nitro-1,3,5-triazaadamantane

trans-Platinum(ii) oxadiazoline complexes with 7-nitro-1,3,5-triazaadamantane (NO₂-TAA) or hexamethylenetetramine (hmta) ligands have been synthesised from trans-[PtCl₂(PhCN)₂] via cycloaddition of nitrones to one of the coordinated nitriles, followed by exchange of the other nitrile by NO₂-TAA or hmta. Stoichiometric control allows for the selective synthesis of mono- and dinuclear complexes where 7-NO₂TAA and hmta act as mono- and bidentate ligands, respectively. Precursors and the target complexes trans-[PtCl₂(hmta)(oxadiazoline)], trans-[PtCl₂(NO₂-TAA)(oxadiazoline)] and trans-[{PtCl₂(oxadiazoline)}₂(hmta)] were characterised by elemental analysis, IR and multinuclear (¹H, ¹³C, ¹⁹⁵Pt) NMR spectroscopy. DFT (B3LYP/6-31G*/LANL08) and AIM calculations suggest a stronger bonding of hmta with the [PtCl₂(oxadiazoline)] fragment, in agreement with the experimentally observed reactivity in the ligand exchange (hmta > 7-NO₂TAA). Replacement of the nitrile by hmta is predicted to be more exothermic than that with 7-NO₂-TAA, although the activation barriers are similar. Protonation of the non-coordinated N atoms is anticipated to weaken the Pt-N bond and lower the activation barrier for ligand exchange. This effect might help activate these compounds in a slightly acidic environment such as some tumour tissues. Ten of the new compounds were tested for their in vitro cytotoxicity in the human cancer cell lines HeLa and A549. Some of the mononuclear complexes are more potent than cisplatin, and their activity is still high in A549 where cisplatin shows little effect. The dinuclear complexes are inactive, presumably due to their lipophilicity and reduced solubility in water.

Engineering Porous Poly(lactic acid) Scaffolds with High Mechanical Performance via a Solid State Extrusion/Porogen Leaching Approach

A knotty issue concerning the poor mechanical properties exists in the porogen leaching approach to porous scaffolds, despite its advantage in tuning pore structure. To address this hurdle, solid state extrusion (SSE) combined with porogen leaching was utilized to engineer porous scaffolds of poly(lactic acid) (PLA). Advances introduced by poly(ethylene glycol) (PEG) caused the PLA ductile to be processed and, on the other hand, enabled the formation of interconnected pores. Thus, a well-interconnected porous architecture with high connectivity exceeding 97% and elevated porosity over 60% was obtained in the as-prepared PLA scaffolds with the composition of NaCl higher than 75.00 wt % and PEG beyond 1.25 wt %. More strikingly, the pore walls of macropores encompassed countless micropores and rough surface topography, in favor of transporting nutrients and metabolites as well as cell attachment. The prominent compressive modulus of the PLA scaffolds was in the range of 85.7⁻207.4 MPa, matching the normal modulus of human trabecular bone (50⁻250 MPa). By means of alkaline modification to improve hydrophilicity, biocompatible porous PLA scaffolds exhibited good cell attachment. These results suggest that the SSE/porogen leaching approach provides an eligible clue for fabricating porous scaffolds with high mechanical performance for use as artificial extracellular matrices.

Safety assessment of isoparaffins as used in cosmetics

The safety of isoparaffins as used in cosmetic products is reviewed in this safety assessment. These ingredients function mostly as solvents and also function as emollients in the 0001% to 90% concentration range. The Cosmetic Ingredient Review (CIR) Expert Panel has reviewed relevant animal and clinical data and concluded that these ingredients are safe in the present practices of use and concentration described in this safety assessment.

Considerations regarding use of solvents in in vitro cell based assays

Cell culture systems are widely used for the investigation of in vitro immunomodulatory effects of medicines and natural products. Since many pharmacological relevant compounds are water-insoluble, solvents are frequently used in cell based assays. Although many reports describe the cellular effects of solvents at high concentrations, only a few relate the effects of solvents used at low concentrations. In this report we investigate the interference of three commonly used solvents: Dimethyl sulfoxide (DMSO), ethanol and β-cyclodextrin with five different cell culture systems. The effects of the solvents are investigated in relation to the cellular production of interleukin (IL)-6 or reactive oxygen species (ROS) after lipopolysaccharide (LPS) stimulation. We show that DMSO above 1 % reduces readout parameters in all cell types but more interestingly the 0.25 and 0.5 % solutions induce inhibitory effects in some cell types and stimulatory effects in others. We also found that LPS induced ROS production was more affected than the IL-6 production in the presence of ethanol. Finally we showed that β-cyclodextrin at the investigated concentrations did not have any effect on the LPS induced IL-6 production and only minor effects on the ROS production. We conclude that the effects induced by solvents even at low concentrations are highly relevant for the interpretation of immunomodulatory effects evaluated in cell assays. Furthermore, these results show the importance of keeping solvent concentrations constant in serial dilution of any compound investigated in cell based assays.

Toxic effects of two brominated flame retardants BDE-47 and BDE-183 on the survival and protein expression of the tubificid Monopylephorus limosus

The toxic effects of two brominated diphenyl ethers (BDE), BDE-47, and BDE-183, on a benthic oligochaete tubificid, Monopylephorus limosus were studied under laboratory conditions. Investigated responses included survival, growth, and protein expression profiles, at BDE concentrations of 1, 10, 100, and 700 ng/g on a dry soil weight basis, with isooctane as the carrier solvent. Body weight losses among treatments were insignificant after 8 weeks of exposure. The 8-wk LC(50) of BDE-47 and -183 were 2311 and 169 ng/g, respectively. By applying multivariate analysis techniques, protein expression patterns were compared and correlated with stressful sources of long-term culture, carrier solvent, BDE-47 and -183. The treatment of 8-wk 100 ng/g BDE-47 was most closely clustered to the 10 ng/g BDE-183 treatment, based on the 40 examined protein spots. This indicated that BDE-183 was more potent to M. limosus, than was BDE-47. The 2-wk and 8-wk controls clustered into different groups indicating the occurrence of physiological changes due to long-term laboratory culture. Additionally, solvent effect was shown by grouping the isooctane carrier to different clusters. With further characterization by principle component analysis, it was found that the separation was mainly contributed by the 2nd principal-component. And, the primarily inhibitory variation was at spots 2 (UMP-CMP kinase) and 40 (plasma retinol-binding protein precursor) in the 8-wk groups. On the contrary, protein spots 16 (cell division control protein 2 homolog) and 24 (mitochondrial DNA mismatch repair protein) showed stimulatory variation. In all, the observed proteomic responses suggest that BDEs disrupted metabolic function in M. limosus and multivariate analysis tool offers significant potential for the assessment of various stress sources at biochemical level.

Biodegradable polylactide/hydroxyapatite nanocomposite foam scaffolds for bone tissue engineering applications

Supercritical carbon dioxide processing of poly-L-lactide (PLLA)/hydroxyapatite (nHA) nanocomposites was investigated as a means to prepare foams suitable as scaffolds in bone tissue engineering applications. For given foaming parameters, addition of nHA to the PLLA gave reduced cell sizes and improved homogeneity in the size distribution, but did not significantly affect the degree of crystallinity, which remained of the order of 50 wt% in all the foams. The compressive modulus and strength were primarily influenced by the porosity and there was no significant reinforcement of the matrix by the nHA. The mechanical properties of the foams were nevertheless comparable with those of trabecular bone, and by adjusting the saturation pressure and depressurization rate it was possible to generate porosities of about 85 %, an interconnected morphology and cell diameters in the range 200-400 μm from PLLA containing 4.17 vol% nHA, satisfying established geometrical requirements for bone replacement scaffolds.

Regulation of polyisoprenylated methylated protein methyl esterase by polyunsaturated fatty acids and prostaglandins

Polyisoprenylation is a set of secondary modifications involving proteins whose aberrant activities are implicated in cancers and degenerative disorders. The last step of the pathway involves an ester-forming polyisoprenylated protein methyl transferase- and hydrolytic polyisoprenylated methylated protein methyl esterase (PMPMEase)-catalyzed reactions. Omega-3 and omega-6 polyunsaturated fatty acids (PUFAs) have been linked with antitumorigeneis and tumorigenesis, respectively. PUFAs are structurally similar to the polyisoprenyl groups and may interfere with polyisoprenylated protein metabolism. It was hypothesized that PUFAs may be more potent inhibitors of PMPMEase than their more polar oxidative metabolites, the prostaglandins. As such, the relative effects of PUFAs and prostaglandins on PMPMEase could explain the association between cyclooxygenase-2 (COX-2) expression in tumors, the chemopreventive effects of the non-steroidal anti-inflammatory (NSAIDs) COX-2 inhibitors and PUFAs. PUFAs such as arachidonic (AA), eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids inhibited PMPMEase activity with Ki values of 0.12 to 3.7 μM. The most potent prostaglandin was 63-fold less potent than AA. The PUFAs were also more effective at inducing neuroblastoma cell death at physiologically equivalent concentrations. The lost PMPMEase activity in AA-treated degenerating cells was restored by incubating the lysates with COX-1 or COX-2. PUFAs may thus be physiological regulators of cell growth and could owe these effects to PMPMEase inhibition.

Development of porous lamellar poly(L-lactic acid) scaffolds by conventional injection molding process

A novel fabrication technique is proposed for the preparation of unidirectionally oriented, porous scaffolds by selective polymer leaching from lamellar structures created by conventional injection molding. The proof of the concept is implemented using a 50/50 wt.% poly(L-lactic acid)/poly(ethylene oxide) (PLLA/PEO) blend. With this composition, the PLLA and PEO blend is biphasic, containing a homogeneous PLLA/PEO phase and a PEO-rich phase. The two phases were structured using injection molding into well-defined alternating layers of homogeneous PLLA/PEO phase and PEO-rich phase. Leaching of water-soluble PEO from the PEO-rich phase produces macropores, and leaching of phase-separated PEO from the initially homogeneous PLLA/PEO phase produces micropores in the lamellae. Thus, scaffolds with a macroporous lamellar architecture with microporous walls can be produced. The lamellae are continuous along the flow direction, and a continuous lamellar thickness of less than 1 microm could be achieved. Porosities of 57-74% and pore sizes of around 50-100 microm can be obtained using this process. The tensile elastic moduli of the porous constructs were between 580 and 800 MPa. We propose that this organic-solvent-free method of preparing lamellar scaffolds with good mechanical properties, and the reproducibility associated with the injection molding technique, holds promise for a wide range of guided tissue engineering applications.

Human fetal bone cells associated with ceramic reinforced PLA scaffolds for tissue engineering

Fetal bone cells were shown to have an interesting potential for therapeutic use in bone tissue engineering due to their rapid growth rate and their ability to differentiate into mature osteoblasts in vitro. We describe hereafter their capability to promote bone repair in vivo when combined with porous scaffolds based on poly(l-lactic acid) (PLA) obtained by supercritical gas foaming and reinforced with 5 wt.% beta-tricalcium phosphate (TCP). Bone regeneration was assessed by radiography and histology after implantation of PLA/TCP scaffolds alone, seeded with primary fetal bone cells, or coated with demineralized bone matrix. Craniotomy critical size defects and drill defects in the femoral condyle in rats were employed. In the cranial defects, polymer degradation and cortical bone regeneration were studied up to 12 months postoperatively. Complete bone ingrowth was observed after implantation of PLA/TCP constructs seeded with human fetal bone cells. Further tests were conducted in the trabecular neighborhood of femoral condyles, where scaffolds seeded with fetal bone cells also promoted bone repair. We present here a promising approach for bone tissue engineering using human primary fetal bone cells in combination with porous PLA/TCP structures. Fetal bone cells could be selected regarding osteogenic and immune-related properties, along with their rapid growth, ease of cell banking and associated safety.

Repair of critical size defects in the rat cranium using ceramic-reinforced PLA scaffolds obtained by supercritical gas foaming

Bioresorbable scaffolds made of poly(L-lactic acid) (PLA) obtained by supercritical gas foaming were recently described as suitable for tissue engineering, portraying biocompatibility with primary osteoblasts in vitro and interesting mechanical properties when reinforced with ceramics. The behavior of such constructs remained to be evaluated in vivo and therefore the present study was undertaken to compare different PLA/ceramic composite scaffolds obtained by supercritical gas foaming in a critical size defect craniotomy model in Sprague-Dawley rats. The host-tissue reaction to the implants was evaluated semiquantitatively and similar tendencies were noted for all graft substitutes: initially highly reactive but decreasing with time implanted. Complete bone-bridging was observed 18 weeks after implantation with PLA/ 5 wt % beta-TCP (PLA/TCP) and PLA/5 wt % HA (PLA/HA) scaffolds as assessed by histology and radiography. We show here for the first time that this solvent-free technique provides a promising approach in tissue engineering demonstrating both the biocompatibility and osteoconductivity of the processed structures in vivo.

Effects of organophosphorus pesticides and their ozonation byproducts on gap junctional intercellular communication in rat liver cell line

The effects of organophosphorus pesticides (OPs), oxons and their ozonation byproducts on gap junctional intercellular communication (GJIC) on cultured BRL cell line were investigated using scrape loading and dye transfer (SL/DT) technique. The neutral red uptake assay was used to identify the non-cytotoxic levels of diazinon, parathion and methyl-parathion applied to GJIC assay. The concentration-dependent inhibition of GJIC was observed over a range of 50-350 mg/l diazinon, parathion and methyl-parathion after 90 min incubation compared with the vehicle control. However, oxons and ozonation byproducts of OPs had no inhibition effect on GJIC at any of the concentrations tested. The inhibition of GJIC by OPs was reversible after removal of the tested pesticides followed by incubation with fresh medium. The present study suggested that the ozonation treatment could be used for the detoxification of drinking water and food crops contaminated with diazinon, parathion and methyl-parathion without formation of GJIC toxicity.

Suitability of commonly used excipients for electrophysiological in-vitro safety pharmacology assessment of effects on hERG potassium current and on rabbit Purkinje fiber action potential

INTRODUCTION

Regulatory guidelines require investigation of the liability for delayed ventricular repolarization by new chemical entities within a broad concentration range in-vitro. However, investigation can be limited by poor drug aqueous solubility, and by solvent physicochemical attributes that disrupt cell membrane integrity. Although excipients or solubilizing agents may aid to achieve the necessary high concentrations, no comprehensive overview on the suitability of solvents for in-vitro electrophysiological safety studies exists.

METHODS

Excipients were tested for potential interference with the hERG (human ether-a-go-go-related gene) K(+) current (whole-cell voltage-clamp, 23+/-2 degrees C), and the shape of rabbit Purkinje fiber action potentials (conventional glass microelectrode technique, 37+/-1 degrees C).

RESULTS AND DISCUSSION

Water-soluble complexation builders/carriers had little effect on hERG K(+) current at up to 50 mg/ml (BSA, bovine serum albumin) and 11 mg/ml (HP-beta-CD, hydroxypropyl-beta-cyclodextrin; IC(20), concentration of 20% inhibition). Water-soluble organic (co)solvents inhibited hERG K(+) currents (IC(20), %/mM): 0.7/152, ethanol; 0.9/67, Transcutol; 1.2/154, DMSO (dimethylsulfoxide); 1.6/389, acetonitrile; 1.9/48, polyethylene glycol 400; 2.1/660, methanol. Part of their inhibitory effect is attributed to the osmolality of extracellular solutions, because hERG IC(20) and extrapolated osmolality at the hERG IC(20) strongly correlate. Water-soluble non-ionic solubilizers/surfactants are potent inhibitors of hERG K(+) current with IC(20) concentrations of 0.07% (Cremophor EL) or lower (Tween 20, Tween 80: approximately 0.001%). Part of this inhibitory effect is attributed to their interaction with lipid membranes, because hERG inhibition occurs close to critical micelle concentrations (Cremophor, approximately 0.009%; Tween 20, approximately 0.007%). Purkinje fiber action potentials are little affected by HP-beta-CD at up to 2 mg/ml, while DMSO tends to shorten the action potential duration at 1%.

CONCLUSION

When conducting electrophysiological in-vitro assessments of drug effects, solubilizers/surfactants (Cremophor EL, Tween 20, Tween 80) should be avoided. Instead, water-soluble organic (co)solvents (methanol, acetonitrile, DMSO) or complexation builders/carriers (HP-beta-CD, BSA) appear to be more favorable.

The evaluation of a semiautomated computer method to determine the effects of DMSO on Giardia lamblia–intestinal cell interaction

In this work, we describe a semiautomated computer method to evaluate the activity of a common drug solvent, dimethyl sulfoxide (DMSO), on in vitro Giardia lamblia-host cell interaction. To compare the number of intestinal cells (IEC-6) and the adhered trophozoites over a specific area in control and treated coculture, a computer routine was created. Using video-light microscopy and digital image-processing tools, the operator was able to count the number of epithelial cells or parasites when they were still lying on the slide surface and without the need to detach them from the substrate for counting with a hemocytometer or other counting devices. Using this strategy, we calculated the total cell number per area and verified the effects of different concentrations of DMSO on G. lamblia-intestinal cell interaction and on the IEC-6 culture. At concentrations of 0.2% and 1%, this solvent produced a fragmentation on the monolayer of epithelial cells. However, DMSO did not affect the attachment of G. lamblia. In the course of these experiments, we compared the semiautomated method to the manual counting method and found that the first one generated smaller standard deviations (SD) than the second.

The double porogen approach as a new technique for the fabrication of interconnected poly(L-lactic acid) and starch based biodegradable scaffolds

One of the most widely used fabrication methods of three dimensional porous scaffolds involves compression moulding of a polymer salt mixture, followed by salt leaching. However, the scaffolds prepared by this technique have typically limited interconnectivity. In this study, besides salt particles, an additional polymeric porogen, poly(ethylene oxide), PEO, was added to poly(L-lactic acid), PLLA, to enhance the interconnectivity of the scaffolds. Compression moulded specimens were quenched and put into water, where PEO crystallized and phase separated. Following the leaching of PEO fraction, the permeability and interconnectivity among the macropores formed by salt leaching could be observed. The porosities obtained in the prepared scaffolds were between 76 to 86%. Moreover, the highest porosity of 86% was obtained with minimum fraction of total porogen. The water absorption of the porous scaffolds prepared with PEO could vary between 280 to 450% while water uptake of pure PLLA scaffolds was about 93%. The increase of interconnectivity induced by compounding PLLA with PEO could also be obtained in porous PLLA/starch blends and PLLA/hydroxyapatite composites demonstrating the versatility and wide applicability of this preparation protocol. The simplicity of this organic solvent free preparation procedure of three-dimensional porous scaffolds with high interconnectivity and high surface area to volume ratio holds a promise for several tissue engineering applications.

Biocompatibility of bioresorbable poly(L-lactic acid) composite scaffolds obtained by supercritical gas foaming with human fetal bone cells

The aim of this investigation was to test the biocompatibility of three-dimensional bioresorbable foams made of poly(L-lactic acid) (PLA), alone or filled with hydroxyapatite (HA) or beta-tricalcium phosphate (beta-TCP), with human primary osteoblasts, using a direct contact method. Porous constructs were processed by supercritical gas foaming, after a melt-extrusion of ceramic/polymer mixture. Three neat polymer foams, with pore sizes of 170, 310, and 600 microm, and two composite foams, PLA/5 wt% HA and PLA/5 wt% beta-TCP, were examined over a 4-week culture period. The targeted application is the bone tissue-engineering field. For this purpose, human fetal and adult bone cells were chosen because of their highly osteogenic potential. The association of fetal bone cells and composite scaffold should lead to in vitro bone formation. The polymer and composite foams supported adhesion and intense proliferation of seeded cells, as revealed by scanning electron microscopy. Cell differentiation toward osteoblasts was demonstrated by alkaline phosphatase (ALP) enzymatic activity, gamma-carboxylated Gla-osteocalcin production, and the onset of mineralization. The addition of HA or beta-TCP resulted in higher ALP enzymatic activity for fetal bone cells and a stronger production of Gla-osteocalcin for adult bone cells.

NF-kappaB is required for survival of immature auditory hair cells in vitro

Damage to auditory hair cells in the inner ear as a consequence of aging, disease, acoustic trauma, or exposure to ototoxins underlies most cases of hearing impairment. Because the mammalian ear cannot replace damaged hair cells, loss of hearing is irreversible and progressive throughout life. One of the current goals of inner ear biology is to develop therapeutic strategies to prevent hair cell degeneration. Although important progress has been made in discovering factors that mediate hair cell death, very little is known about the molecular pathway(s) that signal survival. Here we considered the role of NF-kappaB, a ubiquitous transcription factor that plays a major role in the regulation of many apoptosis- and stress-related genes, in mediating hair cell survival. NF-kappaB was detected in a constitutively active form in the organ of Corti of 5-day-old rats. Selective inhibition of NF-kappaB through use of a cell-permeable inhibitory peptide in vitro caused massive degeneration of hair cells within 24 h of inhibitor application. Hair cell death occurred through an apoptotic pathway through activation of caspase-3 and may involve transcriptional down-regulation of the gadd45beta gene, an anti-apoptotic NF-kappaB target. In view of our results, it seems likely that NF-kappaB may participate in normal hair cell function.

Bioresorbable composites prepared by supercritical fluid foaming

Bone is a natural composite construct, with a gradient structure going from a loose interconnected cellular core to an outer dense wall, thus minimizing bone weight while keeping a high mechanical resistance. Due to this unique and complex structure, bone defects are difficult to replace or repair. Tissue engineering aims at providing artificial bone grafts. Several techniques have been proposed to produce porous structures or scaffolds, but, as yet, with no optimal solutions. This article focuses on bioresorbable ceramic-polymer composite foams obtained by supercritical fluid foaming. This flexible technique enables an adequate morphology and suitable properties for bone tissue engineering to be obtained. Composite scaffolds are biocompatible, allowing cell proliferation and differentiation.

Safety assessment of food-contact paper and board using a battery of short-term toxicity tests: European union BIOSAFEPAPER project

An European Union (EU)-funded project QLK1-CT-2001-00930 (BIOSAFEPAPER) involves the development, validation and intercalibration of a short-term battery of toxicological tests for the safety assessment of food-contact paper and board. Dissemination of the results to industry, legislators (e.g. DG Consumer Protection, DG Enterprises, DG Research), standardization bodies such as CEN, and consumers will create an agreed risk evaluation procedure. The project involves pre-normative research in order to establish a set of in-vitro cytotoxicity and genotoxicity tests that will be easily adaptable to food-contact fibre-based materials and have endpoints relevant to consumer safety, including sub-lethal cellular events. These tests will be performed on samples representing actual migration conditions from food-contact paper and board with respect to different foodstuffs, and should form an experimental basis for scientifically sound recommendations for a harmonized system of risk evaluation and product testing.

Evaluation of toxicity of pesticides and their biodegradation products using human cells

Juvenoids are biologically active compounds, of relatively low toxicity to humans, that efficiently inhibit the fertility of insects. However, little attention has been paid to the stability and toxicity of products that may be generated by their biodegradation in the ecosystem. This study describes a simple comparison of the toxicity of the active compound and its degradation products generated by aerobic soil microbial isolates. Surprisingly we have found that toxicity of a biologically active carbamate juvenoid N-[2-[4-(2,2-ethylenedioxy-1-cyclohexylmethyl)-phenoxylethyl]carbamate (W328) was comparable with that of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (DDT). The toxic effect was evaluated using the determination of the ATP/ADP content and viability of HeLa S3 cells exposed to various concentrations of the chemicals tested for various durations. DDT was used as a reference compound. Its toxicity was compared with two juvenile hormone analogs. The original compound, W328, was found to be the most toxic. The major product (W329) generated both by yeast isolates and the mixture of moulds lost its activity on reproduction of the tested insect. Its toxicity towards human cells was also decreased. Another two W328 degradation HPLC fractions exhibited significantly reduced toxicity compared to W328.