Simultaneous MRI tagging and through-plane velocity quantification: a three-dimensional myocardial motion tracking algorithm

Luminal Fluid Motion Inside an In Vitro Dissolution Model of the Human Ascending Colon Assessed Using Magnetic Resonance Imaging

Knowledge of luminal flow inside the human colon remains elusive, despite its importance for the design of new colon-targeted drug delivery systems and physiologically relevant in silico models of dissolution mechanics within the colon. This study uses magnetic resonance imaging (MRI) techniques to visualise, measure and differentiate between different motility patterns within an anatomically representative in vitro dissolution model of the human ascending colon: the dynamic colon model (DCM). The segmented architecture and peristalsis-like contractile activity of the DCM generated flow profiles that were distinct from compendial dissolution apparatuses. MRI enabled different motility patterns to be classified by the degree of mixing-related motion using a new tagging method. Different media viscosities could also be differentiated, which is important for an understanding of colonic pathophysiology, the conditions that a colon-targeted dosage form may be subjected to and the effectiveness of treatments. The tagged MRI data showed that the DCM effectively mimicked wall motion, luminal flow patterns and the velocities of the contents of the human ascending colon. Accurate reproduction of in vivo hydrodynamics is an essential capability for a biorelevant mechanical model of the colon to make it suitable for in vitro data generation for in vitro in vivo evaluation (IVIVE) or in vitro in vivo correlation (IVIVC). This work illustrates how the DCM provides new insight into how motion of the colonic walls may control luminal hydrodynamics, driving erosion of a dosage form and subsequent drug release, compared to traditional pharmacopeial methods.

Combination of tagging and tissue phase mapping to accelerate myocardial motion measurements in three directions

OBJECT

Until now, a three-directional velocity field has mostly been obtained by velocity encoding in three directions, which is very time-consuming and hence not usually used in clinical routine. We show the feasibility of combining in-plane tagging with through-plane tissue phase mapping (TPM) to encode a three-directional velocity field at 3 T with reduced overall acquisition time.

MATERIALS AND METHODS

Assessment of a three-directional velocity field was performed for 10 healthy volunteers. The motion patterns obtained by use of five different sequences including three-directional TPM, TPM in the through-plane direction, TPM in the through-plane direction with horizontal or vertical tagging lines, and TPM in the through-plane direction combined with a tagging grid were evaluated and compared.

RESULTS

A three-dimensional velocity field can be obtained in approximately half the acquisition time by combining through-plane TPM with in-plane tagging. Although the velocity information is derived by different means, differences between the information obtained by three-directional TPM encoding and the suggested technique are only minor.

CONCLUSION

The combination of tagging and TPM enables assessment of the three-directional velocity field in nearly half the time taken when the conventional three-directional TPM sequence is used.

Myocardial tagging by cardiovascular magnetic resonance: evolution of techniques--pulse sequences, analysis algorithms, and applications

Cardiovascular magnetic resonance (CMR) tagging has been established as an essential technique for measuring regional myocardial function. It allows quantification of local intramyocardial motion measures, e.g. strain and strain rate. The invention of CMR tagging came in the late eighties, where the technique allowed for the first time for visualizing transmural myocardial movement without having to implant physical markers. This new idea opened the door for a series of developments and improvements that continue up to the present time. Different tagging techniques are currently available that are more extensive, improved, and sophisticated than they were twenty years ago. Each of these techniques has different versions for improved resolution, signal-to-noise ratio (SNR), scan time, anatomical coverage, three-dimensional capability, and image quality. The tagging techniques covered in this article can be broadly divided into two main categories: 1) Basic techniques, which include magnetization saturation, spatial modulation of magnetization (SPAMM), delay alternating with nutations for tailored excitation (DANTE), and complementary SPAMM (CSPAMM); and 2) Advanced techniques, which include harmonic phase (HARP), displacement encoding with stimulated echoes (DENSE), and strain encoding (SENC). Although most of these techniques were developed by separate groups and evolved from different backgrounds, they are in fact closely related to each other, and they can be interpreted from more than one perspective. Some of these techniques even followed parallel paths of developments, as illustrated in the article. As each technique has its own advantages, some efforts have been made to combine different techniques together for improved image quality or composite information acquisition. In this review, different developments in pulse sequences and related image processing techniques are described along with the necessities that led to their invention, which makes this article easy to read and the covered techniques easy to follow. Major studies that applied CMR tagging for studying myocardial mechanics are also summarized. Finally, the current article includes a plethora of ideas and techniques with over 300 references that motivate the reader to think about the future of CMR tagging.

Three-dimensional magnetic resonance myocardial motion tracking from a single image plane

Three-dimensional imaging for the quantification of myocardial motion is a key step in the evaluation of cardiac disease. A tagged magnetic resonance imaging method that automatically tracks myocardial displacement in three dimensions is presented. Unlike other techniques, this method tracks both in-plane and through-plane motion from a single image plane without affecting the duration of image acquisition. A small z-encoding gradient is subsequently added to the refocusing lobe of the slice-selection gradient pulse in a slice following CSPAMM acquisition. An opposite polarity z-encoding gradient is added to the orthogonal tag direction. The additional z-gradients encode the instantaneous through plane position of the slice. The vertical and horizontal tags are used to resolve in-plane motion, while the added z-gradients is used to resolve through-plane motion. Postprocessing automatically decodes the acquired data and tracks the three-dimensional displacement of every material point within the image plane for each cine frame. Experiments include both a phantom and in vivo human validation. These studies demonstrate that the simultaneous extraction of both in-plane and through-plane displacements and pathlines from tagged images is achievable. This capability should open up new avenues for the automatic quantification of cardiac motion and strain for scientific and clinical purposes.

Myocardial tagging with 3D-CSPAMM

PURPOSE

To introduce a true three-dimensional (3D) tagging technique for the assessment of myocardial tissue motion.

MATERIALS AND METHODS

To generate a 3D tagging grid, a complementary spatial modulation of magnetization (CSPAMM) was applied in three spatial directions. Imaging was performed using a conventional fast 3D gradient-echo sequence. For automatic analysis of the 3D-CSPAMM data set, evaluation software, based on a 3D extension of the HARP technique, was used.

RESULTS

Successful application of the 3D-CSPAMM technique in healthy subjects allowed the accurate determination of quantitative 3D motion patterns in the human heart.

CONCLUSION

3D-CSPAMM may contribute to the quantification of the local 3D myocardial motion pattern throughout the cardiac cycle.

Phase contrast MRI of myocardial 3D strain by encoding contiguous slices in a single shot

Quantitative measurements of inherently three-dimensional (3D) cardiac strain and strain rate require 3D data; MRI provides uniquely high sensitivity to material strain by combining phase contrast with single-shot acquisition methods, such as echo-planar imaging (EPI). Previous MRI methods applied to 3D strain used multiple two-dimensional (2D) acquisitions and suffered loss of sensitivity due to magnification within the strain calculation of physiologic noise related to cardiac beat-to-beat variability. In the present work, each single-shot acquisition generates 3D image data by acquiring two contiguous 2D Fourier transform (FT) images in a single echo train of an EPI readout. Although strain encoding divides across multiple EPI shots, each strain component is computed only within single-shot data, avoiding noise magnification. Strain tensor maps are displayed using iconic 3D graphics or a simple color code of tensor shape. In a deforming gel phantom, gradient-recalled echo (GRE) MRI movies of 3D strain rates match expected strain fields. In normal human subjects, 3D strain rate tensor movies of heart and brain comprising seven slices in each of seven cardiac phases were completed in 56 heartbeats. Stimulated echo (STE) MRI of net systolic 3D strain was also demonstrated. Two-slices-in-one-shot spatial encoding permits a complete quantitative survey of ventricular 3D strain in under a minute, with routine patient supervision and turnkey image processing.

A new method for the study of velopharyngeal function using gated magnetic resonance imaging

The purpose of this project was to assess the feasibility of imaging the velopharynx of adult volunteers during repetitive speech, using gated magnetic resonance imaging (MRI). Although a number of investigators have used conventional MRI in the study of the human vocal tract, the mismatch between the lengthy time necessary to acquire sufficiently detailed images and the rapidity of movement of the vocal tract during speech has forced investigators to acquire images either while the subject is at rest or during sustained utterances. The technique used here acquired a portion of each image during repetitive utterances, building the full image over multiple utterance cycles. The velopharyngeal portal was imaged on a 1.5-Tesla GE Signa LX 8.2 platform with gated fast spoiled gradient echo protocol. An external 1-Hertz trigger was fed to the cardiac gate. Subjects synchronized utterance of consonant-vowel syllables to a flashing light synchronized with the external trigger. Each acquisition of 30 phases per second at a single-slice location took 22 to 29 seconds. Four consonant-vowel syllables (/pa/, /ma/, /sa/, and /ka/) were evaluated. Subjects vocalized throughout the acquisition, beginning 5 to 6 seconds beforehand to establish a regular rhythm. Imaging of the velopharyngeal portal was performed for sagittal, velopharyngeal axial (aligned perpendicular to the "knee" of the velum), axial, and coronal planes. Volumes were obtained by sequential acquisition of six to 10 slices (each with 30 phases) in the axial or sagittal planes during repetition of the /pa/ syllable. Spatiotemporal volumes of the single-slice data were sectioned to provide time-motion images (analogous to M-mode echocardiograms). Three-dimensional dynamic volume renderings of palate motion were displayed interactively (Vortex; CieMed, Singapore). A method suitable for the collection and visualization of four-dimensional information regarding monosyllabic speech using gated MRI was developed. These techniques were applied to a population of adult volunteer subjects with no history of speech problems and two patients with a history of cleft lip and palate. The techniques allowed good real-time visualization of velopharyngeal anatomy during its entire range of motion and was also able to image pathology-specific anatomic differences in the subjects with cleft lip and cleft palate. These methods may be applicable to a wide spectrum of problems in speech physiology research and for clinical decision-making regarding surgery for speech and outcomes analysis.