Comparative interaction of alpha-helical and beta-sheet amphiphilic isopeptides with phospholipid monolayers

Translational use of homing peptides: Tumor and placental targeting

HYPOTHESIS

Tissue-specific homing peptides have been shown to improve chemotherapeutic efficacy due to their trophism for tumor cells. Other sequences that selectively home to the placenta are providing new and safer therapeutics to treat complications in pregnancy. Our hypothesis is that the placental homing peptide RSGVAKS (RSG) may have binding affinity to cancer cells, and that insight can be gained into the binding mechanisms of RSG and the tumor homing peptide CGKRK to model membranes that mimic the primary lipid compositions of the respective cells.

EXPERIMENTS

Following cell culture studies on the binding efficacy of the peptides on a breast cancer cell line, a systematic translational characterization is delivered using ellipsometry, Brewster angle microscopy and neutron reflectometry of the extents, structures, and dynamics of the interactions of the peptides with the model membranes on a Langmuir trough.

FINDINGS

We start by revealing that RSG does indeed have binding affinity to breast cancer cells. The peptide is then shown to exhibit stronger interactions and greater penetration than CGKRK into both model membranes, combined with greater disruption to the lipid component. RSG also forms aggregates bound to the model membranes, yet both peptides bind to a greater extent to the placental than cancer model membranes. The results demonstrate the potential for varying local reservoirs of peptide within cell membranes that may influence receptor binding. The innovative nature of our findings motivates the urgent need for more studies involving multifaceted experimental platforms to explore the use of specific peptide sequences to home to different cellular targets.

Effect of Interfacial Water on the Nanomechanical Properties of Negatively Charged Floating Bilayers Supported on Gold Electrodes

Floating lipid bilayers composed of phosphatidylglycerols and cardiolipin were deposited on gold electrodes premodified with 1-thio-β-d-glucose monolayer by spreading of small unilamellar vesicles. The resulting lipid membrane was homogeneous, and its thickness was ∼5.0 nm. Electrochemical characterization combined with surface-enhanced infrared absorption spectroscopy revealed that negative polarization of the electrode leads to accumulation of water molecules in the interfacial region between lipid membrane and the thioglucose film. Moreover, the buildup of water layer was demonstrated to affect the nanomechanical properties of the membrane. The latter was manifested by well-pronounced decrease of Young's modulus of the lipid bilayer correlating with increasing hydration. This effect was ascribed to the decoupling of the membrane from supporting thioglucose film due to the accumulation of interfacial water. As a result, the effective stiffness of the supporting layer is lower and it alters the nanomechanical behavior of lipid membrane. Our results provide strong experimental proof for the correlation between elastic properties of floating lipid membrane and the amount of water accumulated in the submembrane region.

Interfacial molecular interactions based on the conformation recognition between the insoluble antitumor drug AD-1 and DSPC

In this study, molecular interactions between the anti-cancer agent 20(R)-25-methoxyl-dammarane-3β, 12β, 20-triol (AD-1) and phospholipid 1,2-Distearoyl-sn-glycero-3-phosphocholine (DSPC) were investigated using the Langmuir film balance technique. The characteristics of binary Langmuir monolayers consisting of DSPC and AD-1 were conducted on the basis of the surface pressure-area per molecule (π-A) isotherms. It was found that the drug was able to become efficiently inserted into preformed DSPC monolayers, indicating a preferential interaction between AD-1 and DSPC. For the examined lateral pressure at 20mN/m, the largest negative values of ΔGex were found for the AD-1/DSPC monolayer, which should be the most stable. Based on the calculated values of ΔGex, we found that the AD-1/DSPC systems exhibited the best mixed characteristics when the molar fraction of the AD-1 was 0.8; at that relative concentration, the AD-1 molecules can mix better and interact with the phospholipid molecules. In addition, the drug-DSPC binary supramolecular structure was also deposited on the mica plates as shown by atomic force microscopy (AFM). Finally, molecular docking calculations explained satisfactorily that, based on the conformations interactions (conformation recognition), even at an AD-1/DSPC molar ratio as high as 8:2, the interfacial stabilization of the AD-1/DSPC system was fairly strong due to hydrophobic interactions. A higher loading capacity of DSPC might be possible, as it is associated with a more flexible geometrical environment, which allows these supramolecular structures to accept larger increases in drug loading upon steric binding.

Surface behavior of peptides from E1 GBV-C protein: Interaction with anionic model membranes and importance in HIV-1 FP inhibition

The interaction between a peptide sequence from GB virus C E1 protein (E1P8) and its structural analogs (E1P8-12), (E1P8-13), and (E1P8-21) with anionic lipid membranes (POPG vesicles and POPG, DPPG or DPPC/DPPG (2:1) monolayers) and their association with HIV-1 fusion peptide (HIV-1 FP) inhibition at the membrane level were studied using biophysical methods. All peptides showed surface activity but leakage experiments in vesicles as well as insertion kinetics in monolayers and lipid/peptide miscibility indicated a low level of interaction: neither E1P8 nor its analogs induced the release of vesicular content and the exclusion pressure values (πe) were clearly lower than the biological membrane pressure (24-30 mN m(-1)) and the HIV-1 FP (35 mN m(-1)). Miscibility was elucidated in terms of the additivity rule and excess free energy of mixing (GE). E1P8, E1P8-12 and E1P8-21 (but not E1P8-13) induced expansion of the POPG monolayer. The mixing process is not thermodynamically favored as the positive GE values indicate. To determine how E1 peptides interfere in the action of HIV-1 FP at the membrane level, mixed monolayers of HIV-1 FP/E1 peptides (2:1) and POPG were obtained. E1P8 and its derivative E1P8-21 showed the greatest HIV-1 FP inhibition. The LC-LE phase lipid behavior was morphologically examined via fluorescence microscopy (FM) and atomic force microscopy (AFM). Images revealed that the E1 peptides modify HIV-1 FP-lipid interaction. This fact may be attributed to a peptide/peptide interaction as indicated by AFM results. Finally, hemolysis assay demonstrated that E1 peptides inhibit HIV-1 FP activity.

Characterization of the in situ structural and interfacial properties of the cationic hydrophobic heteropolypeptide, KL4, in lung surfactant bilayer and monolayer models at the air-water interface: implications for pulmonary surfactant delivery

This study examines the various equilibrium in situ secondary structures of the pharmaceutical heteropolypeptide, KL 4, in the solid state, in solution, and in the monolayer state alone and mixed with dipalmitoylphosphatidylcholine (DPPC) and palmitoyloleoylphosphatidylglycerol (POPG). In situ surface circular dichroism spectroscopy, using a method first reported by Damodaran (Damodaran, S. Anal. Bioanal. Chem. 2003, 376, 182-188), of equilibrated KL 4, DPPC/KL 4, POPG/KL 4, and DPPC/POPG/KL 4 monolayers at the air-water interface was used to examine the in situ two-dimensional conformation of KL 4. Gravimetric vapor sorption by solid KL 4 was used to analyze the effects of water molecules on the conformation of KL 4 when confined as a monolayer at the surface of water. Solid-state KL 4 conformation was determined by X-ray powder diffraction (XRPD). The equilibrium interfacial and spreading properties were measured at 25 degrees C, 37 degrees C, and 45 degrees C using the Wilhelmy plate method and Langmuir film balance. Equilibrium phase transition temperatures were measured using differential scanning calorimetry (DSC). It was found that solid-state KL 4, which takes up very little water, exhibits beta-sheet and alpha-helix secondary structures, whereas KL 4 in solution appears to exist only as an alpha-helix. KL 4 forms a stable, insoluble monolayer, exhibiting beta-sheet and aperiodic structures. These structures provide KL 4, when confined in two-dimensions, the structural flexibility to maximize favorable cationic lysine-water interactions and favorable leucine-leucine hydrophobic and van der Waals interactions; while effectively "shielding" the leucine residues away from water. In DPPC/KL 4 monolayers, KL 4 retains its native beta-sheet and aperiodic structures, consistent with phase separation of DPPC and KL 4 in bilayers and monolayers. In POPG/KL 4 monolayers, KL 4 exhibits an increase in aperiodic secondary structures (loss of beta-sheet) to maximize favorable electrostatic interactions, consistent with the observed negative deviations from ideal monolayer mixing.

Synthesis and study of molecular interactions between phosphatidyl choline and two laminin derived peptides hydrophobically modified

Two peptides based on the active SIKVAV sequence were synthesized and hydrophobically modified through attachment of a myristoyl residue to the amino terminal group. A comparative study was carried out on the physicochemical properties of both parent and hydrophobically modified structures. Properties studied were hydrophobicity, surface activity, spreadability on aqueous surfaces, penetration in lipid monolayers, aggregation and haemolytic activity. Results obtained indicate that myristoyl containing peptides form micelles at 10(-6) M concentration, whereas parent peptides start to aggregate at 10(-5) M. All of them are able to spread on aqueous surfaces forming stable monolayers. Concerning their haemolytic activity only one of the sequences promotes a partial lysis of erythrocytes after 30 min incubation at 37 degrees C and 10(-5) M concentration in the media.

Secondary conformation of short lysine- and leucine-rich peptides assessed by optical spectroscopies: effect of chain length, concentration, solvent, and time

Solution secondary structures of three synthetic cationic peptides, currently used in antisense oligonucleotide delivery into living cells, have been analyzed by means of circular dichroism (CD) and Raman scattering in different buffers as a function of concentration and time. All three peptides are of minimalist conception, i.e., formed by only two types of amino acids (leucine: L and lysine: K). Two of these peptides contain 15 aminoacids: N(ter)- KLLKLLLKLLLKLLK (L(10)K(5)), N(ter)-KLKLKLKLKLKLKLK (L(7)K(8)), and the third one has only 9 residues: N(ter)-KLKLKLKLK (L(4)K(5)). The conformational behavior of the 15-mers in pure water differs considerably one from another. Although both of them are initially disordered in the 50-350 microM range, L(10)K(5) gradually undergoes a disordered to alpha-helix transition for molecular concentrations above 100 microM. In all other solvents used, L(10)K(5) adopts a stable alpha-helical conformation. In methanol and methanol/Tris mixture, nonnative alpha-helices can be induced in both KL-alternating peptides, i.e., L(7)K(8) and L(4)K(5). However, in major cases and with a time delay depending on peptide concentration, beta-like structures can be gradually formed in both solutions. In PBS and methanol/PBS mixture, the tendency for L(7)K(8) and L(4)K(5) is to form structures belonging to beta-family. A discussion has been undertaken on the effect of counterions as well as their nature in the stabilization of ordered structures in both KL-alternating peptides.

Interfacial properties of a synthetic peptide derived from hepatitis G virus E2 protein: interaction with lipid monolayers

A useful approach to get information about the potential fusogenic ability of virus synthetic peptides is the study of its interfacial properties and subsequent study in mono- and bilayers. In this work, we have characterized by means of physicochemical tools (i.e. compression isotherms and surface activity) the sequence 267-284, LLGTEVSEVLGGAGLTGG, derived from the E2 structural protein of HGV/GBV-C. The adsorption of the peptide at the air/water interface was monitored by following the increase in surface pressure as a function of time at two different pH values: 5 and 7. Parameters such as surface excess or molecular area were calculated from the equation of Gibbs. The peptide showed a tendency to migrate to the surface of a saline-buffered solution. It formed stable monolayers at the air/water interface giving a compression isotherm with a shape consistent with that of some alpha-helical peptide conformations. Brewster angle microscopy (BAM) showed that through compression the peptide formed multilayers. The studies with lipid monolayers (DPMC, DMPC/DMPG, and DMPC/DMTAP) showed that the peptide interacts with all the lipids assayed producing a marked disrupting effect upon them. In these effects electrostatic interactions seem to have some participation.

Study in mono and bilayers of the interaction of hepatitis G virus (GBV-C/HGV) synthetic antigen E2(99-118) with cell membrane phospholipids

The interaction of the hepatitis G synthetic peptide E2(99-118) with cell membrane phospholipids of different characteristics such as dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) was studied by Langmuir isotherms. Epifluorescence microscopy and Atomic force microscopy (AFM) was also used to study interactions with DPPC. Compression isotherms of DPPC/E2(99-118) and DPPG/E2(99-118) mixed monolayers showed negative deviation from ideallity consistent with the existence of attractive interactions. The incorporation of the peptide in DPPC monolayer was also confirmed in epifluorescence microscopy and AFM studies. The peptide retarded the formation of DPPC domains and did not let the phospholipid get organized. No important differences in the interactions with DPPC (neutral) or DPPG (anionic) were found, thus suggesting that electrostatics forces do not have a predominant influence in these interactions.

Direct comparison of membrane interactions of model peptides composed of only Leu and Lys residues

We compared the properties of two peptides of identical size and amino acid composition, Ac-(LKKL)(5)-NHEt and Ac-(KL)(10)-NHEt. Both are amphipathic, but only Ac-(LKKL)(5)-NHEt is a potent promoter of negative curvature. CD studies performed in the presence of lipids confirmed that under these conditions Ac-(LKKL)(5)-NHEt forms an alpha-helix, and Ac-(KL)(10)-NHEt adopts a beta structure. We studied their binding affinity by centrifugation and isothermal titration calorimetry techniques. The Ac-(LKKL)(5)-NHEt bound to zwitterionic and anionic liposomes, while Ac-(KL)(10)-NHEt interacted mainly with anionic liposomes. Ac-(LKKL)(5)-NHEt was more lytic than Ac-(KL)(10)-NHEt for zwitterionic palmitoyloleoylphosphatidylcholine (POPC) liposomes, and for liposomes composed of lipids extracted from either sheep or human erythrocytes (RBC). Both peptides had similar lytic and lipid mixing activities for liposomes containing anionic lipids. Both peptides were highly hemolytic, with Ac-(LKKL)(5)-NHEt active against sheep RBC and Ac-(KL)(10)-NHEt more active against human RBC. From their respective minimal effective concentrations (MECs) as antimicrobial agents, we judged Ac-(KL)(10)-NHEt to be 2 to 5-fold more potent than Ac-(LKKL)(5)-NHEt in media that contained physiological concentrations of NaCl. Notwithstanding, both peptides had MECs <1 microg/mL for Escherichia coli and Pseudomonas aeruginosa and <4 microg/mL for Staphylococcus aureus and methicillin-resistant Staphylococcus aureus. Although selectivity of antimicrobial peptides for bacterial membranes may result, in part, from the preferential display of anionic residues in these membranes, inability to interact with or bind to zwitterionic phospholipids offers no guarantee that the peptide will lack appreciable cytotoxicity for host cells.