A novel surfactant-based immobilization method for varying substrate-bound fibronectin

Presentation of fibronectin fragments using affinity protein interactions for enhanced retention and function

We present a protein immobilization system, based on the Src Homology 3 (SH3) affinity domain, allowing for a transient interaction between a fibronectin ligand and a biomaterial surface. This strategy leads to enhanced retention of the fibronectin fragment over adsorbed fibronectin, and increased cellular proliferation and motility over either covalently immobilized or adsorbed fibronectin. The results indicate that intermediate affinity protein immobilization could provide benefits for tissue engineering beyond the traditional immobilization techniques, adsorption or covalent attachment.

Non-fouling biomaterials based on blends of polyethylene oxide copolymers and polyurethane: simultaneous measurement of platelet adhesion and fibrinogen adsorption from flowing whole blood

Measurements of platelet adhesion and fibrinogen adsorption from flowing whole blood to a series of polyethylene oxide (PEO)-based materials were carried out. A unique experimental design was used in which both quantities were measured in the same experiment. The materials consisted of a polyurethane (PU) as a matrix into which various triblock copolymers of general structure PEO-PU-PEO were blended; the PU block was the same in all materials but the PEO blocks ranged in molecular weight from 550 to 5000. Platelets were isolated from fresh human blood and labeled with (51)Cr; purified fibrinogen was labeled with (125)I. A whole blood preparation containing these labeled species was used for the adhesion/adsorption studies. The surfaces were exposed to the flowing blood in a cone and plate device at a wall shear rate of 300 s(-1). It was found that both platelet adhesion and fibrinogen adsorption decreased with increasing copolymer content in the blends and with decreasing PEO block size for a given copolymer content. The block size effect was due probably to higher PEO surface coverage for the lower molecular weight blocks. Fibrinogen adsorption and platelet adhesion were linearly and strongly correlated. The best performing materials showed very low fibrinogen adsorption of the order of 25 ng/cm(2), and correspondingly low platelet densities around 10,000 per cm(2), i.e. fractional platelet coverage in the vicinity of 0.2%.

Aminooxy pluronics: synthesis and preparation of glycosaminoglycan adducts

Novel biomaterials have been prepared in which glycosaminoglycans (GAGs) are chemically modified to create amphiphilic multiblock copolymers that are able to adhere to hydrophobic surfaces and can self-assemble into cross-linker-free hydrogels. First, the triblock poly(ethylene oxide)-polypropylene oxide copolymers (Pluronics) were converted into the previously unknown aminooxy (AO) derivatives. Both mono-AO and bis-AO Pluronics (AOPs) were synthesized and fully characterized in order to prepare tetrablock and pentablock copolymers, respectively. Second, the AOPs were coupled to the uronic acid carboxylates of heparin (HP) and hyaluronic acid (HA) using carbodiimide chemistry in order to give the previously undescribed amidooxy GAG derivatives. The coupling chemistry was confirmed using a newly prepared fluorescent AO reagent. Third, AOP-heparin and AOP-fluorescently labeled heparin were shown to adsorb efficiently to polystyrene surfaces, as determined by IL-8 based ELISA and fluorescence measurements, respectively. Fourth, AOP-linked fluorescently labeled HA was shown to adsorb efficiently to plastic surfaces. Finally, three different AOPs were evaluated for self-assembling hydrogel formation by AOP-HA pentablock polymers. In short, AOP-GAG adducts are semisynthetic amphiphilic biomacromolecules that offer a range of valuable practical opportunities for surface modification, preparation of cross-linker-free hydrogels, and formation of self-assembling mimics of the extracellular matrix.

Surface-attached PEO in the form of activated pluronic with immobilized factor H reduces both coagulation and complement activation in a whole-blood model

In the present work we have bound Pluronic, a class of triblock copolymers consisting of a block of polypropylene oxide (PPO) surrounded on each side by polyethylene oxide (PEO) blocks, to polystyrene surfaces and investigated the thrombogenicity and complement activation of this construct upon exposure to whole blood. The surface was highly inert towards coagulation, unfortunately at the expense of increased complement activation. We, therefore, as an alternative approach, used End-Group Activated Pluronic to conjugate factor H, a regulator of complement activation (RCA), to the surface. The bound factor H did not detach from the surface upon incubation with human serum. Furthermore, factor H bound in a physiological conformation could to a significant degree attenuate complement activation at the Pluronic surface. Thus, we have created a hybrid surface in which the coagulation-inert properties of the original Pluronic are supplemented with a specific complement-inhibitory effect. Medical device technology includes numerous potential applications for crosslinkers that are capable of specifically binding biomolecules to surfaces with retained activity. These applications include coupling of functional biomolecules to biomedical devices such as stents and grafts. The biomolecule may be an RCA, antibody, or other beneficial ligand.

Fibronectin adsorption and arrangement on copolymer surfaces and their significance in cell adhesion

The adsorption of fibronectin (FN) to (styrene/methyl methacrylate) copolymer surfaces, both sulfonated (hydrophilic) and nonsulfonated (hydrophobic), was studied by means of the radioisotope (125I-FN) and ELISA assays; the latter employed monoclonal antibodies. It was found that the radioiodination-derived isotherms did not follow the Langmuir-type adsorption law within the FN concentration range studied; rather, a quasi-linear FN surface density versus bulk concentration dependence was observed. These isotherms, and our recent ELISA measurements with polyclonal antibodies, allowed us to estimate saturative FN surface densities, which were, within the experimental error, similar on both types of surfaces. This suggested the amount of adsorbed FN to be not responsible for observed differences in leukaemia L1210 cell adhesion (FN-coated sulfonated surfaces are far more pro-adhesive than their nonsulfonated analogues). The presumption that these differences are induced by changes in the FN arrangement was confirmed by the use of monoclonal antibodies directed against distinct FN domains, and by the blocking of alpha5beta1 integrin receptor with the synthetic Gly-Arg-Gly-Asp-Ser-Pro (GRGDSP) peptide. The RGD sequence located within the FN cell-binding domain seems to be masked in the structure adopted on nonsulfonated surfaces, which hinders the integrin-ligand interaction.

Physicochemical properties and in vitro biocompatibility of PEO/PTMO multiblock copolymer/segmented polyurethane blends

A multiblock copolymer composed of poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (PTMO) and which forms a physical hydrogel was blended with Pellethane, a commercial segmented polyurethane (SPU) developed for various biomedical devices, to provide a PEO-rich surface with improved stability. The effect of the copolymer blending was evaluated with respect to surface hydrophilicity, long-term stability, mechanical properties, in vitro protein adsorption, and platelet adhesion. A small amount of the copolymer additive (5 wt%) significantly improved surface hydrophilicity, which was then gradually enhanced by increasing the amount of the copolymer in the blends. The blend films exhibited minimal extraction of the copolymer additive when exposed to a buffer solution for 2 months at 37 degrees C, resulting in less than 1 wt% weight loss of the films even with 30 wt% content of the copolymer in the blends. Although a certain degree of alteration in the mechanical properties was observed by increasing the copolymer content, the mechanical properties were well maintained for up to 10 wt% addition of the copolymer, when compared with the bare SPU. Protein adsorption was significantly reduced with a small amount of copolymer additive as low as 5 wt%. Fibrinogen, an adhesive protein for further cellular adhesion and activation, was effectively repelled by increasing the amount of copolymer additive. The platelet adhesion test revealed that the blend film surface reduced platelet adhesion and the degree of inhibition was proportional to the content of the additive, up to 30 wt%. The high molecular weight (Mw = 66,000) and compatible chemical structure of the copolymer with SPU made the surfaces PEO-rich and stable in an aqueous environment, resulting in an enhancement of the resistance to protein adsorption and platelet adhesion without a significant deterioration in physical properties.