Osteoblast response to titanium surface roughness and 1?,25-(OH)2D3 is mediated through the mitogen-activated protein kinase (MAPK) pathway

Evaluation of the In Vitro Behavior of Electrochemically Deposited Plate-like Crystal Hydroxyapatite Coatings

The purpose of coatings is to protect or enhance the functionality of the substrate material, irrespective of the field in which the material was designed. The use of coatings in medicine is rapidly expanding with the objective of enhancing the osseointegration ability of metallic materials such as titanium. The aim of this study was to obtain biomimetic hydroxyapatite (HAp)-based coatings on titanium by using the pulsed galvanostatic method. The morphology of the HAp-based coatings revealed the presence of very thin and wide plate-like crystals, grown perpendicular to the Ti substrate, while the chemical composition highlighted a Ca/P ratio of 1.66, which is close to that of stoichiometric HAp (1.67). The main phases and chemical bonds identified confirmed the presence of the HAp phase in the developed coatings. A roughness of 228 nm and a contact angle of approx. 17° were obtained for the HAp coatings, highlighting a hydrophilic character. In terms of biomineralization and electrochemical behavior, it was shown that the HAp coatings have significantly enhanced the titanium properties. Finally, the in vitro cell tests carried out with human mesenchymal stem cells showed that the Ti samples coated with HAp have increased cell viability, extracellular matrix, and Ca intracellular deposition when compared with the uncoated Ti, indicating the beneficial effect.

Efficacy of bone defect therapy involving various surface treatments of titanium alloy implants: an in vivo and in vitro study

Multiple surface treatment methods for titanium alloy prostheses, widely used in orthopedics, are available; however, these can affect bone integration and regeneration efficiency. In this study, through cell and animal experiments, we devised seven bone implant categories of Ti6Al4V based on surface preparation and post-processing technology (polishing, grit-blasting, fine titanium spraying, coarse titanium spraying, electron beam melting [EBM] printing, selective laser melting [SLM] printing, and post-processed SLM printing) and imaged each microscopic surface structure with a scanning electron microscope (SEM). Mechanical testing revealed excessive post-processing damaged the mechanical properties of the implants. In vitro, human bone marrow mesenchymal stem cells (hBMSCs) were cultured with implants, and the morphology of the cells adhering to the implant surface was observed using SEM and confocal laser scanning microscopy. Cell Counting Kit-8 (CCK-8) semi-quantitatively determined cell activity, indirectly reflecting the proliferation of hBMSCs. Alizarin red and alkaline phosphatase experiments assessed osteogenic differentiation. In vivo, experiments utilized the New Zealand rabbit femoral condyle bone defect model to assess bone regeneration and integration using micro-computed tomography, Van Giesen staining, and Masson staining. We found that 3D-printed implants with regular pore structures were more conducive to hBMSC osteogenic differentiation, while the presence of metal powder on NPT-SLM-printed implants hindered such differentiation. The post-treatment SLM scaffold surface may have some residual semi-melted powder; however, these powder residues have no significant effect on cell activity and differentiation. Surface treatment (grit-blasting and titanium spraying) of planar structures can enhance hBMSC adhesion but does not necessarily promote their differentiation. The framework structure of 3D printing may affect the osteogenic differentiation of hBMSCs, and for SLM-printed implants, excessive pursuit of a "powderless" state will damage the mechanical properties of the implant.

mTORC2 regulates hierarchical micro/nano topography-induced osteogenic differentiation via promoting cell adhesion and cytoskeletal polymerization

Surface topography acts as an irreplaceable role in the long‐term success of intraosseous implants. In this study, we prepared the hierarchical micro/nano topography using selective laser melting combined with alkali heat treatment (SLM‐AHT) and explored the underlying mechanism of SLM‐AHT surface‐elicited osteogenesis. Our results show that cells cultured on SLM‐AHT surface possess the largest number of mature FAs and exhibit a cytoskeleton reorganization compared with control groups. SLM‐AHT surface could also significantly upregulate the expression of the cell adhesion‐related molecule p‐FAK, the osteogenic differentiation‐related molecules RUNX2 and OCN as well as the mTORC2 signalling pathway key molecule Rictor. Notably, after the knocked‐down of Rictor, there were no longer significant differences in the gene expression levels of the cell adhesion‐related molecules and osteogenic differentiation‐related molecules among the three titanium surfaces, and the cells on SLM‐AHT surface failed to trigger cytoskeleton reorganization. In conclusion, the results suggest that mTORC2 can regulate the hierarchical micro/nano topography‐mediated osteogenesis via cell adhesion and cytoskeletal reorganization.

Bisphosphonates inhibit surface-mediated osteogenesis

Bisphosphonates (BPs) target osteoclasts, slowing bone resorption thus providing rationale to support osseointegration. However, BPs may negatively affect osteoblasts, impairing peri-implant bone formation. The goal of this study was to assess the effects BPs have on surface-mediated osteogenesis of osteoblasts. MG63 cells were cultured on 15-mm grade 2 titanium disks: smooth, hydrophobic-microrough, or hydrophilic-microrough (Institut Straumann AG, Basel, Switzerland). Tissue culture polystyrene (TCPS) was used as a control. At confluence, cells were treated with 0, 10^-8 , 10^-7 , and 10^-6 M of alendronate, zoledronate, or ibandronate for 24 hr. Sprague Dawley rats were also treated with 1 μg/kg/day ibandronate or phosphate-buffered saline control for 5 weeks. Calvarial osteoblasts (rat osteoblasts [rOBs]) were isolated, characterized, and cultured on surfaces. Osteogenic markers in the media were quantified using ELISAs. BP treatment reduced osteocalcin, osteoprotegerin, osteopontin, bone morphogenetic protein-2, prostaglandin E₂ , transforming growth factor β1, interleukin 10, and vascular endothelial growth factor in MG63 cells. The effect was more robust on rough surfaces, and higher concentrations of BPs stunted production to TCPS/PT levels. Ibandronate conditioned rOBs produced less osteogenic markers similar to direct BP treatment. These results suggest that BP exposure jeopardizes the pro-osteogenic response osteoblasts have to microstructured surfaces. Their effects persist in vivo and negatively condition osteoblast response in vitro. Clinically, BPs could compromise osseointegration.

A Newly Created Meso-, Micro-, and Nano-Scale Rough Titanium Surface Promotes Bone-Implant Integration

Titanium implants are the standard therapeutic option when restoring missing teeth and reconstructing fractured and/or diseased bone. However, in the 30 years since the advent of micro-rough surfaces, titanium’s ability to integrate with bone has not improved significantly. We developed a method to create a unique titanium surface with distinct roughness features at meso-, micro-, and nano-scales. We sought to determine the biological ability of the surface and optimize it for better osseointegration. Commercially pure titanium was acid-etched with sulfuric acid at different temperatures (120, 130, 140, and 150 °C). Although only the typical micro-scale compartmental structure was formed during acid-etching at 120 and 130 °C, meso-scale spikes (20–50 μm wide) and nano-scale polymorphic structures as well as micro-scale compartmental structures formed exclusively at 140 and 150 °C. The average surface roughness (Ra) of the three-scale rough surface was 6–12 times greater than that with micro-roughness only, and did not compromise the initial attachment and spreading of osteoblasts despite its considerably increased surface roughness. The new surface promoted osteoblast differentiation and in vivo osseointegration significantly; regression analysis between osteoconductivity and surface variables revealed these effects were highly correlated with the size and density of meso-scale spikes. The overall strength of osseointegration was the greatest when the acid-etching was performed at 140 °C. Thus, we demonstrated that our meso-, micro-, and nano-scale rough titanium surface generates substantially increased osteoconductive and osseointegrative ability over the well-established micro-rough titanium surface. This novel surface is expected to be utilized in dental and various types of orthopedic surgical implants, as well as titanium-based bone engineering scaffolds.

Human osteoblasts exhibit sexual dimorphism in their response to estrogen on microstructured titanium surfaces

BACKGROUND

Osseointegration is dependent on the implant surface, surrounding bone quality, and the systemic host environment, which can differ in male and female patients. Titanium (Ti) implants with microstructured surfaces exhibit greater pullout strength when compared to smooth-surfaced implants and exhibit enhanced osteogenic cellular responses in vitro. Previous studies showed that 1α,25-dihydroxyvitamin D3 [1α,25(OH)₂D₃] has a greater effect on rat osteoblast differentiation on microstructured Ti compared to smooth Ti surfaces and tissue culture polystyrene (TCPS). The stimulatory effect of 17β-estradiol (E₂) on differentiation is observed in female osteoblasts on micro-rough Ti, but it is not known if male osteoblasts behave similarly in response to E₂ and microtopography. This study assessed whether human male and female osteoblasts exhibit sex-specific differences in response to E₂ and 1α,25(OH)₂D₃ when cultured on microstructured Ti surfaces.

METHODS

Osteoblasts from three male and three female human donors were cultured on Ti discs with varying surface profiles: a smooth pretreatment (PT), a coarse grit-blasted/acid-etched (SLA), and an SLA surface having undergone modification in a nitrogen environment and stored in saline to maintain hydrophilicity (modSLA). Cells cultured on these surfaces were treated with E₂ or 1α,25(OH)₂D₃.

RESULTS

Male and female human osteoblasts responded similarly to microstructure although there were donor-specific differences; cell number decreased, and osteocalcin (OCN), osteoprotegerin (OPG), and latent and active transforming growth factor 1 increased on SLA and modSLA compared to TCPS. Female osteoblasts had higher alkaline phosphatase activity and OCN production than male counterparts but produced less OPG. Both sexes responded similarly to 1α,25(OH)₂D₃. E₂ treatment reduced cell number and increased osteoblast differentiation and factor production only in female cells.

CONCLUSIONS

Male and female human osteoblasts respond similarly to microstructure and 1α,25(OH)₂D₃ but exhibit sexual dimorphism in substrate-dependent responses to E₂. E₂ affected female osteoblasts, suggesting that signaling is sex-specific and surface-dependent. Donor osteoblasts varied in response, demonstrating the need to test multiple donors when examining human samples. Understanding how male and female cells respond to orthopedic biomaterials will enable greater predictability post-implantation as well as therapies that are more patient-specific.

The induction of CXCR4 expression in human osteoblast-like cells (MG63) by CoCr particles is regulated by the PLC-DAG-PKC pathway

BACKGROUND

Osteolysis which leads to aseptic loosening of implants is a fundamental problem in joint replacement surgery (arthroplasty) and the leading cause for implant failure and revision surgery. Metal (CoCr) particles separated from implants by wear cause osteolysis and the failure of orthopedic implants, but the molecular mechanism is not clear. The chemokine receptor CXCR4 has been shown to play a pivotal role in periprosthetic osteolysis. The aim of this study was to determine which signal transduction pathway (PLC-DAG-PKC or MAPK/ERK) induces CXCR4 expression in osteoblast-like cells (MG63) cells.

METHODS

MG63 and Jurkat cells were stimulated with different amounts of particles (10⁷ , 10⁶ , and 10⁵ ) for different time periods (30 min to 24 h), in the presence and absence of specific inhibitors (chelerythrine for the PLC-DAG-PKC pathway and PD98059 for the MAPK/ERK pathway). The expression of CXCR4-specific mRNA was determined by real-time polymerase chain reaction (PCR), and the PKC activity was measured by Western Blot using an antibody specific for PKC-related phosphorylation.

RESULTS

Real-time PCR data showed that CXCR4 mRNA expression in MG63 cells induced by CoCr particles was significantly diminished by the PKC-specific inhibitor chelerythrine. This effect was not observed with the MAPK/ERK inhibitor PD98059. The involvement of PKC was also confirmed by an intensified phosphorylation pattern after stimulation with CoCr particles. In Jurkat cells, none of the inhibitors exhibited any effect.

CONCLUSION

The induction of CXCR4-specific mRNA expression in MG63 cells after stimulation with CoCr particles is regulated by the PLC-DAG-PKC pathway and not by the MAPK/ERK pathway. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2326-2332, 2017.

Porous titanium and Ti-35Nb alloy: effects on gene expression of osteoblastic cells derived from human alveolar bone

Tests on titanium alloys that possess low elastic modulus, corrosion resistance and minimal potential toxicity are ongoing. This study aimed to evaluate the behavior of human osteoblastic cells cultured on dense and porous Titanium (Ti) samples comparing to dense and porous Ti-35 Niobium (Ti-35Nb) samples, using gene expression analysis. Scanning electronic microscopy confirmed surface porosity and pore interconnectivity and X-ray diffraction showed titanium beta-phase stabilization in Ti-35Nb alloy. There were no differences in expression of transforming growth factor-β, integrin-β1, alkaline phosphatase, osteopontin, macrophage colony stimulating factor, prostaglandin E synthase, and apolipoprotein E regarding the type of alloy, porosity and experimental period. The experimental period was a significant factor for the markers: bone sialoprotein II and interleukin 6, with expression increasing over time. Porosity diminished Runt-related transcription factor-2 (Runx-2) expression. Cells adhering to the Ti-35Nb alloy showed statistically similar expression to those adhering to commercially pure Ti grade II, for all the markers tested. In conclusion, the molecular mechanisms of interaction between human osteoblasts and the Ti-35Nb alloy follow the principal routes of osseointegration of commercially pure Ti grade II. Porosity impaired the route of transcription factor Runx-2.

A Key Role of Autophagy in Osteoblast Differentiation on Titanium-Based Dental Implants

Autophagy plays an important role in embryogenesis, for the maintenance of tissue homeostasis and the elimination of damaged subcellular structures. Furthermore, autophagy could be a mode of physiological cell death and also be implicated in cell differentiation. Thus, we hypothesized that autophagy may have an impact on the differentiation of osteoblast cells influenced by various titanium-based surfaces. Interactions between smooth, commercially available pure titanium (Ti cp), rough Ticer, acid-etched Ti cp (SS) and M1-M3 (comprised of the monoclinic phase of sodium-titanium oxides and rutile; M2 contains amorphous calcium phosphates) and human osteoblast cells were investigated. Immunofluorescent staining was used for detecting autophagy, cell cluster formation and collagen type I (Col-1) expression. Flow cytometry was employed to identify autophagy, the production of endogenous nitric oxide (NO) and the size and granularity of the cells. Rough surfaces caused osteoblast differentiation via the autophagic-dependent PI3/Akt signalling pathway. These surfaces induced the formation of discrete populations of large, granular cells, i.e. mature osteoblasts. In addition, M1-M3 provoked the development of a third population of small, granular cells, responsible for cell cluster formation, which are important for the formation of bone noduli and mineralisation. The same surfaces induced faster osteoblast maturation and enhanced NO production, a hallmark of the already mentioned processes. Neither the mature osteoblasts nor the small cells appeared after the inhibition of autophagy. Inhibition of autophagy also prevented cell cluster formation. We demonstrate that autophagy plays an essential role in the osteoblast differentiation on titanium-based surfaces with rough topography.

Evaluation of antibacterial activity and osteoblast-like cell viability of TiN, ZrN and (Ti1-xZrx)N coating on titanium

PURPOSE

The aim of this study was to evaluate antibacterial activity and osteoblast-like cell viability according to the ratio of titanium nitride and zirconium nitride coating on commercially pure titanium using an arc ion plating system.

MATERIALS AND METHODS

Polished titanium surfaces were used as controls. Surface topography was observed by scanning electron microscopy, and surface roughness was measured using a two-dimensional contact stylus profilometer. Antibacterial activity was evaluated against Streptococcus mutans and Porphyromonas gingivalis with the colony-forming unit assay. Cell compatibility, mRNA expression, and morphology related to human osteoblast-like cells (MG-63) on the coated specimens were determined by the XTT assay and reverse transcriptase-polymerase chain reaction.

RESULTS

The number of S. mutans colonies on the TiN, ZrN and (Ti_1-xZr_x)N coated surface decreased significantly compared to those on the non-coated titanium surface (P<0.05).

CONCLUSION

The number of P. gingivalis colonies on all surfaces showed no significant differences. TiN, ZrN and (Ti_1-xZr_x)N coated titanium showed antibacterial activity against S. mutans related to initial biofilm formation but not P. gingivalis associated with advanced periimplantitis, and did not influence osteoblast-like cell viability.

Significance of calcium phosphate coatings for the enhancement of new bone osteogenesis--a review

A systematic analysis of results available from in vitro, in vivo and clinical trials on the effects of biocompatible calcium phosphate (CaP) coatings is presented. An overview of the most frequently used methods to prepare CaP-based coatings was conducted. Dense, homogeneous, highly adherent and biocompatible CaP or hybrid organic/inorganic CaP coatings with tailored properties can be deposited. It has been demonstrated that CaP coatings have a significant effect on the bone regeneration process. In vitro experiments using different cells (e.g. SaOS-2, human mesenchymal stem cells and osteoblast-like cells) have revealed that CaP coatings enhance cellular adhesion, proliferation and differentiation to promote bone regeneration. However, in vivo, the exact mechanism of osteogenesis in response to CaP coatings is unclear; indeed, there are conflicting reports of the effectiveness of CaP coatings, with results ranging from highly effective to no significant or even negative effects. This review therefore highlights progress in CaP coatings for orthopaedic implants and discusses the future research and use of these devices. Currently, an exciting area of research is in bioactive hybrid composite CaP-based coatings containing both inorganic (CaP coating) and organic (collagen, bone morphogenetic proteins, arginylglycylaspartic acid etc.) components with the aim of promoting tissue ingrowth and vascularization. Further investigations are necessary to reveal the relative influences of implant design, surgical procedure, and coating characteristics (thickness, structure, topography, porosity, wettability etc.) on the long-term clinical effects of hybrid CaP coatings. In addition to commercially available plasma spraying, other effective routes for the fabrication of hybrid CaP coatings for clinical use still need to be determined and current progress is discussed.

Effect of cold working on biocompatibility of Ni-free high nitrogen austenitic stainless steels using Dalton's Lymphoma cell line

The aims of the present work are to explore the effect of cold working on in-vitro biocompatibility of indigenized low cost Ni-free nitrogen containing austenitic stainless steels (HNSs) and to compare it with conventionally used biomedical grade, i.e. AISI 316L and 316LVM, using Dalton's Lymphoma (DL) cell line. The MTT assay [3-(4,5-dimethythiazol 2-yl)-2,5-diphenyltetrazolium bromide] was performed on DL cell line for cytotoxicity evaluation and cell adhesion test. As a result, it was observed that the HNS had higher cell proliferation and cell growth and it increases by increasing nitrogen content and degree of cold working. The surface wettability of the alloys was also investigated by water contact angle measurements. The value of contact angles was found to decrease with increase in nitrogen content and degree of cold working. This indicates that the hydrophilic character increases with increasing nitrogen content and degree of cold working which further attributed to enhance the surface free energy (SFE) which would be conducive to cell adhesion which in turn increases the cell proliferation.

Phospholipases of mineralization competent cells and matrix vesicles: roles in physiological and pathological mineralizations

The present review aims to systematically and critically analyze the current knowledge on phospholipases and their role in physiological and pathological mineralization undertaken by mineralization competent cells. Cellular lipid metabolism plays an important role in biological mineralization. The physiological mechanisms of mineralization are likely to take place in tissues other than in bones and teeth under specific pathological conditions. For instance, vascular calcification in arteries of patients with renal failure, diabetes mellitus or atherosclerosis recapitulates the mechanisms of bone formation. Osteoporosis—a bone resorbing disease—and rheumatoid arthritis originating from the inflammation in the synovium are also affected by cellular lipid metabolism. The focus is on the lipid metabolism due to the effects of dietary lipids on bone health. These and other phenomena indicate that phospholipases may participate in bone remodelling as evidenced by their expression in smooth muscle cells, in bone forming osteoblasts, chondrocytes and in bone resorbing osteoclasts. Among various enzymes involved, phospholipases A₁ or A₂, phospholipase C, phospholipase D, autotaxin and sphingomyelinase are engaged in membrane lipid remodelling during early stages of mineralization and cell maturation in mineralization-competent cells. Numerous experimental evidences suggested that phospholipases exert their action at various stages of mineralization by affecting intracellular signaling and cell differentiation. The lipid metabolites—such as arachidonic acid, lysophospholipids, and sphingosine-1-phosphate are involved in cell signaling and inflammation reactions. Phospholipases are also important members of the cellular machinery engaged in matrix vesicle (MV) biogenesis and exocytosis. They may favour mineral formation inside MVs, may catalyse MV membrane breakdown necessary for the release of mineral deposits into extracellular matrix (ECM), or participate in hydrolysis of ECM. The biological functions of phospholipases are discussed from the perspective of animal and cellular knockout models, as well as disease implications, development of potent inhibitors and therapeutic interventions.

In vivo comparison between laser-treated and grit blasted/acid etched titanium

OBJECTIVE

Laser profiling of titanium has been of considerable interest in the field of oral implantology. However, very few pre-clinical and clinical studies have been performed with laser-treated implants, especially focusing on isotropic roughness topography. The aim of the study was to compare the cortical bone response of Ti-implants discs treated with pico-sec pulsed laser (LAS) and conventional grit-blasted/acid-etched (GAE) method.

MATERIALS AND METHODS

Prior to the in vivo experiment, in vitro cell viability testing of the LAS surface treatment was preformed. Then, 5 mm diameter Titanium (Ti) discs treated with LAS and GAE method were implanted in a pre-validated rabbit tibia cortical bone model and assessed with histology and histomorphometric measurements. In total, eight New Zealand White adult female rabbits were used.

RESULTS

The in vitro cell viability testing with osteoblast-like cells confirmed cytocompatibility of the LAS surface treatment. Further, the rabbit experiment demonstrated a bone-to-implant contact of 68% (±17) for the laser-treated discs and 49% (±21) for the GAE discs 8 weeks after the implantation, which was statistically not different.

CONCLUSION

Laser surface treatment gives the same results to the grit-blasting/acid-etched method and thus is a valid alternative to conventional roughening for dental implant materials.

Osteoblast maturation and new bone formation in response to titanium implant surface features are reduced with age

The surface properties of materials contribute to host cellular response and play a significant role in determining the overall success or failure of an implanted biomaterial. Rough titanium (Ti) surface microtopography and high surface free energy have been shown to enhance osteoblast maturation in vitro and increase bone formation in vivo. Whereas the surface properties of Ti are known to affect osteoblast response, host bone quality also plays a significant role in determining successful osseointegration. One factor affecting host bone quality is patient age. We examined both in vitro and in vivo whether response to Ti surface features was affected by animal age. Calvarial osteoblasts isolated from 1-, 3-, and 11-month-old rats all displayed a reduction in cell number and increases in alkaline phosphatase-specific activity and osteocalcin in response to increasing Ti surface microtopography and surface energy. Further, osteoblasts from the three ages examined displayed increased production of osteocalcin and local factors osteoprotegerin, vascular endothelial growth factor (VEGF)-A, and active transforming growth factor (TGF)-β1 in response to increasing Ti surface roughness and surface energy. Latent TGF-β1 only increased in cultures of osteoblasts from 1- and 3-month-old rats. Treatment with the systemic osteotropic hormone 1α,25(OH)(2)D(3) further enhanced the response of osteoblasts to Ti surface features for all three age groups. However, osteoblasts derived from 11-month-old animals had a reduced response to 1α,25(OH)(2)D(3) compared to osteoblasts derived from 1- or 3-month-old animals. These results were confirmed in vivo. Ti implants placed in the femoral intramedullary canal of old (9-month-old) mice yielded lower bone-to-implant contact and neovascularization in response to Ti surface roughness and energy compared to younger (2-month-old) mice. These results show that rodent osteoblast maturation in vitro as well as new bone formation in vivo is reduced with age. Whether comparable age differences exist in humans needs to be determined.

New PMMA-based composites for preparing spacer devices in prosthetic infections

Even though the systemic antibiotic therapy is usually applied after prosthetic infections surgical treatments, it is unable to reach the infection site in sufficient concentrations to eradicate bacteria. Delivering antibiotics locally with the use of custom made device (spacer or nail coating) might eradicate or reduce the infection and the risk of recolonization, providing a very high concentration of antibiotic. PMMA-based (Mendec Spine) composites with BaSO(4) were enriched with β-tricalcium phosphate (Porosectan-TCP) or only a slightly higher BaSO(4) concentration (Porosectan-BaSO(4)) to obtain higher porosity. The aim of the study was to evaluate: (i) drug absorption capability and drug release kinetics in vitro soaking them with a combined solution of gentamicin and vancomycin, (ii) their in vitro and in vivo biocompatibility, and finally, (iii) they were tested preliminarily in an experimental model of bone infection. The simultaneous presence of β-TCP and BaSO(4) resulted in the formation of a texture of interconnecting channels with different diameters, from a few microns to several hundred microns, which totally filled the material. The porosity, determined by microcomputed tomography, was significantly higher in both tested plain composites (Porosectan-TCP: +17.3%; Porosectan-BaSO(4): +7.5%) in comparison to control composite material (Mendec Spine). The kinetics of antibiotic release from composites was rapid and complete, producing high drug concentrations for a short period of time. Both composites showed a good level of biocompatibility. The osteomyelitic model confirmed that both composites, soaked in antibiotic solution, were able to cure bone infection. These composites could be useful for preparing devices for prosthetic joint infections treatment also allowing the use of antibiotics solution at required concentrations.

Creation of biofunctionalized micropatterns on poly(methyl methacrylate) by single-step phase separation method

In this study, the polymer thin films containing micropatterns and biological functionalities were created by one-step procedure. The adjustable compositions among poly(methyl methacrylate) (PMMA), solvents, nonsolvent, and additional macromolecules formed the polymer thin films with different diameters ranging from 5 to 37 μm. The influences of topographical and chemical cues were investigated by directly cultivating L-929 fibroblasts on the prepared samples. The results revealed the predominant effect of surface topography that the cell density of L-929 fibroblasts increased proportionally with the average diameter of microconcaves. The cell number raised significantly on the PMMA thin films containing type I collagen and dopamine, with or without microstructures. On the other hand, the addition of bovine serum albumin in PMMA limited the growth of cells. The surface chemical composition and cell responses were evaluated by electron spectroscopy for chemical analysis (ESCA), viability assay, and immunostaining, respectively. This work proposed a simple and effective approach to incorporate the biological functions and surface topography simultaneously onto surface of materials that provided further applications for biomedical materials.

Dendritic cell responses to surface properties of clinical titanium surfaces

Dendritic cells (DCs) play pivotal roles in responding to foreign entities during the innate immune response and in initiating effective adaptive immunity as well as maintaining immune tolerance. The sensitivity of DCs to foreign stimuli also makes them useful cells to assess the inflammatory response to biomaterials. Elucidating material property-DC phenotype relationships using a well-defined biomaterial system is expected to provide criteria for immunomodulatory biomaterial design. Clinical titanium (Ti) substrates, including pretreatment (PT), sand blasted and acid etched (SLA), and modified SLA (modSLA), with different roughnesses and surface energies were used to treat DCs and resulted in differential DC responses. PT and SLA induced a mature DC (mDC) phenotype, while modSLA promoted a non-inflammatory environment by supporting an immature DC (iDC) phenotype, based on surface marker expression, cytokine production profiles and cell morphology. Principal component analysis (PCA) confirmed these experimental results, and also indicated that the non-stimulating property of modSLA covaried with certain surface properties, such as high surface hydrophilicity, percent oxygen and percent Ti of the substrates. In addition to previous research that demonstrated superior osteogenic properties of modSLA compared with PT and SLA, the results reported herein indicates that modSLA may further benefit implant osteointegration by reducing local inflammation and its associated osteoclastogenesis.

Use of molecular beacons to image effects of titanium surface microstructure on beta1 integrin expression in live osteoblast-like cells

This study used molecular beacon technology to examine substrate-dependent changes in integrin subunit expression in living cells. Molecular beacons are oligonucleotide probes that can be delivered into live cells to allow for real-time imaging of mRNA. They have a stem-loop hairpin structure with a fluorophore-quencher pair, which opens when bound to the target mRNA sequence, resulting in a fluorescent signal upon excitation. A novel molecular beacon that is specific to the beta1 integrin subunit mRNA was developed and used to image osteoblast-like MG63 cells in vitro on both glass and titanium surfaces of varying roughness. Specificity was verified by comparing the molecular beacon signal intensities to real-time PCR results in both wild-type cells and cells with shRNA knockdown of beta1 integrin mRNA. The molecular beacon was able to detect changes due to both surface microtopography and silencing of the mRNA target. The results showed that effects of the substrate on beta1 mRNA noted previously in confluent cultures were evident in pre-confluent cells as well, supporting the hypothesis that beta1 integrin pairs are important in proliferation as well as differentiation of osteoblasts. This technique overcomes the limitations of traditional gene assays (PCR, immunofluorescence) by allowing for the real-time measurement and tracking of specific mRNAs in individual live cells prior to confluence.

Osteoblast mechanoresponses on Ti with different surface topographies

During implant healing, mechanical force is transmitted to osteogenic cells via implant surfaces with various topographies. This study tested a hypothesis that osteoblasts respond to mechanical stimulation differently on titanium with different surface topographies. Rat bone-marrow-derived osteoblastic cells were cultured on titanium disks with machined or acid-etched surfaces. A loading session consisted of a 3-minute application of a 10- or 20-mum-amplitude vibration. Alkaline phosphatase activity and gene expression increased only when the cells were loaded in 3 sessions/day on machined surfaces, regardless of the vibration amplitude, whereas they were increased with 1 loading session/day on the acid-etched surface. The loading did not affect the osteoblast proliferation on either surface, but selectively enhanced the cell spreading on the machined surface. Analysis of the data suggests that osteoblastic differentiation is promoted by mechanical stimulation on titanium, and that the promotion is disproportionate, depending on the titanium surface topography. The frequency of mechanical stimulation, rather than its amplitude, seemed to have a key role.

Covalent functionalization of NiTi surfaces with bioactive peptide amphiphile nanofibers

Surface modification enables the creation of bioactive implants using traditional material substrates without altering the mechanical properties of the bulk material. For applications such as bone plates and stents, it is desirable to modify the surface of metal alloy substrates to facilitate cellular attachment, proliferation, and possibly differentiation. In this work we present a general strategy for altering the surface chemistry of nickel-titanium (NiTi) shape memory alloy in order to covalently attach self-assembled peptide amphiphile (PA) nanofibers with bioactive functions. Bioactivity in the systems studied here includes biological adhesion and proliferation of osteoblast and endothelial cell types. The optimized surface treatment creates a uniform TiO(2) layer with low levels of Ni on the NiTi surface, which is subsequently covered with an aminopropylsilane coating using a novel, lower temperature vapor deposition method. This method produces an aminated surface suitable for covalent attachment of PA molecules containing terminal carboxylic acid groups. The functionalized NiTi surfaces have been characterized by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectroscopy (ToF-SIMS), and atomic force microscopy (AFM). These techniques offer evidence that the treated metal surfaces consist primarily of TiO(2) with very little Ni, and also confirm the presence of the aminopropylsilane overlayer. Self-assembled PA nanofibers presenting the biological peptide adhesion sequence Arg-Gly-Asp-Ser are capable of covalently anchoring to the treated substrate, as demonstrated by spectrofluorimetry and AFM techniques. Cell culture and scanning electron microscopy (SEM) demonstrate cellular adhesion, spreading, and proliferation on these functionalized metal surfaces. Furthermore, these experiments demonstrate that covalent attachment is crucial for creating robust PA nanofiber coatings, leading to confluent cell monolayers.

Quantitative high-throughput screening of osteoblast attachment, spreading, and proliferation on demixed polymer blend micropatterns

Designing materials that regulate cell function in a desired manner is a major goal of biomaterials engineering. Challenges include the vast material property space to be explored, the complexity of cell-surface interactions, and the empirical nature of research in this field. To address these challenges, combinatorial methods have been developed in recent years for screening cell responses to material surfaces. Previous work using gradient libraries of biodegradable polymers poly(epsilon-caprolactone) and poly(D,L-lactide) showed qualitatively that alkaline phosphatase activity of MC3T3-E1 osteoblasts was dramatically enhanced at specific blend compositions and temperatures. In this study, we expand the combinatorial screening to measure quantitatively early events in the osteoblast life cycle: attachment, spreading, and proliferation. In addition, this work relates these cell assays to quantitative measures of polymer surface microstructure and topography. In general, cell attachment was favored on the more hydrophilic PDLA domains. However, cell spreading was strongly influenced by phase-separated microstructures on the polymer surfaces. Regions of enhanced cell proliferation shifted from one microstructural region to others as the culture progressed from 3 to 8 days. Viability showed no response to the surface features of the libraries. These screening results indicate the precise preparatory conditions and microstructure/topography ranges that should be used to design future confirmatory studies of the fundamental mechanisms of cell response to these heterogeneous patterned surfaces. Given the complex nature and breadth of these parameters, the simplification of the parameter space to be explored is an important advance.

Interface Interactions of Osteoblasts with Structured Titanium and the Correlation between Physicochemical Characteristics and Cell Biological Parameters

Cellular behavior at the interface of an implant is influenced by the material's topography. However, little is known about the correlation between the biological parameters and the physicochemical characteristics of the biomaterial. We therefore modified pure titanium surfaces by polishing, machining, blasting with glass spheres, blasting with corundum particles, and vacuum plasma spraying to give progressively higher surface roughness. The material surface was characterized by SEM, surface profiling, and electrochemical methods. We revealed a correlation for integrin expression and formation, adhesion, spreading, proliferation, and bone sialo protein expression with the physicochemical parameters of the titanium surfaces.

Biological Assessment of Porous-Implant Hydroxyapatite Combined With Periosteal Grafting in Maxillary Defects

PURPOSE

To investigate the use of porous hydroxyapatite (HA) combined with periosteal graft to repair an induced maxillary bone defect.

MATERIALS AND METHODS

A defect was produced in the premaxillary bone of rats. Four groups were used: 1) those treated with the mucoperiosteal graft from the premaxilla; 2) those treated with HA combined with mucoperiosteal graft from the premaxilla; 3) those treated with HA combined with periosteal graft from the femur; and 4) those treated with periosteal graft from the femur.

RESULTS

The radiographic aspects from all groups showed no signs of bone formation after 2 weeks. After 16 weeks, there was evidence of points of radiolucency inside the HA implants. Cell proliferation occurred from the periosteum covering the defect. Bone tissue grew from the defect margin to inside the defect in all cases. Mature bone was seen around the HA implants after 8 and 16 weeks.

CONCLUSION

The periosteal graft provides satisfactory support to the HA implant, allowing the growth of new bone.

Integrin alpha(5) controls osteoblastic proliferation and differentiation responses to titanium substrates presenting different roughness characteristics in a roughness independent manner

Integrin alpha(5)beta(1) regulates osteoblast proliferation and differentiation on smooth synthetic surfaces presenting different chemistries, but it is not known whether this integrin controls osteoblast behavior on surfaces that have micron-scale rough topographies. We cultured MG63 human osteoblast-like cells on titanium substrates with three different roughness characteristics: chemically polished (PT), grit blasted and acid etched with a complex topography consisting of 20-100 mum craters and 0.5-2 mum micropits (SLA), and plasma-sprayed Ti with irregular projections (TPS). Cells spread well on PT but displayed a smaller footprint on SLA or TPS. Nuclei were larger on PT as well. alpha(5)beta(1) binding and FAK phosphorylation were greater on the rougher surfaces (TPS > SLA > PT). Antibodies against the alpha(5)beta(1) binding site on fibronectin had no effect on cell number at 3 days, but [(3)H]-thymidine incorporation was increased, suggesting that binding to fibronectin was necessary for cell cycle regulation. Antibodies to the alpha(5) subunit reduced cell number at 3 days on PT and TPS and reduced DNA synthesis on all substrates in a surface microstructure-independent manner. At 7 days, cell numbers were reduced on PT, and DNA synthesis was reduced by 50% on all surfaces. At 7 days, anti-alpha(5) antibodies caused a partial reduction in alkaline phosphatase enzyme activity on all surfaces, but this effect was independent of surface microstructure. These results indicate that surface micron-scale topography modulates alpha(5)beta(1) integrin binding and FAK activation. Signaling via alpha(5)-dependent mechanisms is required for DNA synthesis and regulation of alkaline phosphatase, but this effect is independent of surface microstructure.

Beta-1 integrins mediate substrate dependent effects of 1alpha,25(OH)2D3 on osteoblasts

Surface micron-scale and submicron scale features increase osteoblast differentiation and enhance responses of osteoblasts to 1,25-dihydroxyvitamin D(3) [1alpha,25(OH)(2)D(3)]. beta(1) integrin expression is increased in osteoblasts grown on Ti substrates with rough microarchitecture, and it is regulated by 1alpha,25(OH)(2)D(3) in a surface-dependent manner. To determine if beta(1) has a role in mediating osteoblast response, we silenced beta(1) expression in MG63 human osteoblast-like cells using small interfering RNA (siRNA). In addition, MG63 cells were treated with two different monoclonal antibodies to human beta(1) to block ligand binding. beta(1)-silenced MG63 cells grown on a tissue culture plastic had reduced alkaline phosphatase activity and levels of osteocalcin, transforming growth factor beta(1), prostaglandin E(2), and osteoprotegerin in comparison with control cells. Moreover, beta(1)-silencing inhibited the effects of surface roughness on these parameters and partially inhibited effects of 1alpha,25(OH)(2)D(3). Anti beta(1) antibodies decreased alkaline phosphatase but increase osteocalcin; effects of 1alpha,25(OH)(2)D(3) on cell number and alkaline phosphatase were reduced and effects on osteocalcin were increased. These findings indicate that beta(1) plays a major and complex role in osteoblastic differentiation modulated by either surface microarchitecture or 1alpha,25(OH)(2)D(3). The results also show that beta(1) mediates, in part, the synergistic effects of surface roughness and 1alpha,25(OH)(2)D(3).

The initial attachment and subsequent behavior regulation of osteoblasts by dental implant surface modification

The aim of this study was to investigate the influence of hydrophobic acid-etched (A) and coarse-blasted large-grit and acid-etched (SLA) surfaces as well as hydrophilic modified acid-etched (modA) and modified coarse-blasted large-grit and acid-etched (modSLA) surfaces on the behavior of MG63 cells grown on these surfaces through determination of cell attachment and cell proliferation, time-lapse microscopy of fluorescence-labeled cells, and determination of gene expression by reverse transcription-polymerase chain reaction (RT-PCR). No significant difference of cell attachment on various titanium surfaces was found. Increased cell proliferation was observed on the A surface and the SLA surface compared with the modA surface and the modSLA surface. After 2 days of incubation, on modSLA and modA surfaces a tendency of formation of cell clusters has been observed, which was most pronounced on modSLA surface. On the A and the SLA surface, cell cluster formation started after longer incubation periods. The expression level of the bone-associated genes (alkaline phosphatase, osteocalcin, type-I-collagen, osteoprotegerin, and glyceraldehyde-3-phosphate-dehydrogenase) detected by RT-PCR was highest on the modSLA surface. In conclusion it has been demonstrated that the modSLA surface results in an enhanced cluster formation of osteoblasts grown on this surface and in an increased expression of key osteogenic regulatory genes in osteoblasts.

Activation of phospholipase D1 by surface roughness of titanium in MG63 osteoblast-like cell

Although it is recognized that the surface roughness of titanium (Ti) promotes the osteogenic differentiation, the related mechanisms and factors remain elusive. The purpose of this study was to explore the potential correlation among phospholipase D (PLD) activity, Ti surface roughness and subsequent osteoblast differentiation. The machined Ti disks were sandblasted with aluminum oxide particles to produce surfaces of varying roughness (n = 160). Normal or transfected MG63cells with PLD genes were cultured on roughened Ti specimens and assayed for PLD, alkaline phosphatase (ALP) and osteocalcin. The statistical significance was evaluated by analysis of variance. The activity, mRNA and protein levels of PLD significantly increased in MG63 cells with a roughness-dependent pattern (P < 0.05). The ALP activity and osteocalcin production, promoted by Ti surface roughness, were enhanced by the PLD activator and inhibited by the PLD blocker. It was also found that the PLD1 isoform responds to Ti surface roughness and regulates selectively the ALP activity. These observations strongly suggest that PLD1 mediates the cellular signaling of and modulates osteoblast differentiation induced by Ti surface roughness in MG63 osteoblast-like cell.

Promising in vitro performances of a new nickel-free stainless steel

Stainless steel is a metallic alloy largely employed in orthopaedics. However, the presence in its composition of a high quantity of nickel, an agent known to trigger toxic and allergic responses, is cause for concern. In this study, we have investigated the in vitro biocompatibility of a new nickel-reduced stainless steel, namely Böhler P558, in comparison to the conventional stainless steel AISI 316L. The neutral red (NR) uptake and the amido black (AB) tests were performed on L929 fibroblasts and MG63 osteoblasts to assess the cytotoxicity, while cytogenetic effects were evaluated on CHOK1 cells by studying the frequency of Sister Chromatid Exchanges (SCE) and chromosomal aberrations. Ames test was used to detect the mutagenic activity. The expression of selected markers typical of differentiated osteoblasts, such as alkaline phosphatase activity (ALP), type I collagen (CICP) and osteocalcin (OC) production, were also monitored in MG63 cells cultured on the tested materials. Our results indicate the absence of significant cytotoxicity and genotoxicity for both test alloys. ALP, CICP and OC analyses confirmed that both materials support the expression of these phenotypic markers. Overall, these data show that this Ni-free alloy possesses good in vitro biocompatibility and could have a potential for orthopaedic applications.

Osteoblast response to plasma-spray porous Ti6Al4V coating on substrates of identical alloy

We have evaluated the in-vitro biocompatibility of Ti6Al4V alloy coated by plasma spraying with an identical alloy. These surfaces are widely used in cementless prosthetic components, although osteoblasts behavior on this treated alloy has not been evaluated to date. Cross sectional examination revealed a thick and rough coating of identical composition without sign of delamination. Within the coating, small discontinuities and nonconnected pores were observed. Osteoblast response was evaluated by assessing cell adhesion, proliferation, and differentiation of primary cultures of human osteoblastic cells. Compared to the polished alloy, osteoblast adhesion measured as cell attachment and actin network reorganization was delayed on the plasma-sprayed surface. Cell proliferation and viability were also impaired on the rough surface. Several informative markers of osteoblastic differentiation such as procollagen I peptide, alkaline phosphatase, osteocalcin, osteoprotegerin, and mineralized nodule formation were evaluated and indicated that the plasma-sprayed alloy favored a more differentiated phenotype than polished alloy. Taken together, our in vitro results indicate that successful osseointegration of plasma spraying of Ti6Al4V with an identical alloy is mediated by modulation of osteoblastic differentiation and mineralization.

Peri-implant osteogenesis in health and osteoporosis

Long-term clinical success of endosseous dental implants is critically related to a wide bone-to-implant direct contact. This condition is called osseointegration and is achieved ensuring a mechanical primary stability to the implant immediately after implantation. Both primary stability and osseointegration are favoured by micro-rough implant surfaces which are obtained by different techniques from titanium implants or coating the titanium with different materials. Host bone drilled cavity is comparable to a common bone wound. In the early bone response to the implant, the first tissue which comes into contact with the implant surface is the blood clot, with particular attention to platelets and fibrin. Peri-implant tissue healing starts with an inflammatory response as the implant is inserted in the bone cavity, but an early afibrillar calcified layer comparable to the lamina limitans or incremental lines in bone is just observable at the implant surface both in vitro than in vivo conditions. Just within the first day from implantation, mesenchymal cells, pre-osteoblasts and osteoblasts adhere to the implant surface covered by the afibrillar calcified layer to produce collagen fibrils of osteoid tissue. Within few days from implantation a woven bone and then a reparative trabecular bone with bone trabeculae delimiting large marrow spaces rich in blood vessels and mesenchymal cells are present at the gap between the implant and the host bone. The peri-implant osteogenesis can proceed from the host bone to the implant surface (distant osteogenesis) and from the implant surface to the host bone (contact osteogenesis) in the so called de novo bone formation. This early bone response to the implant gradually develops into a biological fixation of the device and consists in an early deposition of a newly formed reparative bone just in direct contact with the implant surface. Nowadays, senile and post-menopausal osteoporosis are extremely diffuse in the population and have important consequences on the clinical success of endosseous dental implants. In particular the systemic methabolic and site morphological conditions are not favorable to primary stability, biological fixation and final osseointegration. An early good biological fixation may allow the shortening of time before loading the implant, favouring the clinical procedure of early or immediate implant loading. Trabecular bone in implant biological fixation is gradually substituted by a mature lamellar bone which characterizes the implant ossoeintegration. As a final consideration, the mature lamellar bone observed in osseointegrated implants is not always the same as a biological turnover occurs in the peri-implant bone up to 1mm from the implant surface, with both osteogenesis and bone reabsorption processes.

Modulation of the responses of human osteoblast-like cells to physiologic mechanical strains by biomaterial surfaces

In a previous study we demonstrated that MG-63 cells cultured on Ti-6Al-4V discs covered by alumina ceramic and submitted to intermittent mechanical strain (IMS) presented morphological alteration associated with enhanced differentiation. Here we examine how the mechanical response of osteoblasts can be modulated by the nature of the substrate. MG-63 cells were cultured on four materials: polystyrene and Ti-6Al-4V (average roughness = 0.48 microm) as smooth substrates; Ti-6Al-4V (average roughness = 5.76 microm) and Ti-6Al-4V covered with alumina (average roughness = 5.21 microm) as rough substrates. Mechanical strains were applied for 15 min, three times a day for 1-5 days with a 600 microstrains magnitude and a 0.25 Hz frequency. IMS stimulated alkaline phosphatase activity by 25-35% on all substrates and had no effect on cell growth on either substrate. Fibronectin (FN) was chosen as representative of cell-matrix interaction. FN production was increased by 60% after 1 day of stretching only on alumina-coated discs. FN organization examined on smooth substrates was affected by 5 days of IMS, showing a thickening of the fibres. The same modifications induced by IMS were previously observed on alumina-covered discs. Vinculin expression was not affected by IMS whatever the substrate. Cell-cell interactions were determined by N-cadherin immunoblotting. N-cadherin expression was increased by IMS specifically on rough substrates. Our results suggest that the nature of the surface did not influence the up-regulation of alkaline phosphatase activity induced by IMS, but modulates specifically cell-substrate as well as cell-cell interactions in response to IMS.

Nongenotropic, Anti-Apoptotic Signaling of 1α,25(OH)2-Vitamin D3 and Analogs through the Ligand Binding Domain of the Vitamin D Receptor in Osteoblasts and Osteocytes

Because sex steroids regulate the life span of bone cells by modulating cytoplasmic kinase activity via a nongenotropic action of their classical receptors, we have explored the possibility that the vitamin D nuclear receptor (VDR) might exhibit similar nongenotropic actions. We report that the conformationally flexible full VDR agonist, 1alpha,25(OH)2-vitamin D3 (1alpha,25(OH)2D3), and the 6-s-cis-locked 1alpha,25(OH)2-lumisterol3 (JN) analog, also acting through the VDR but with poor transcriptional activity, protected murine osteoblastic or osteocytic cells from apoptosis. This effect was reproduced in HeLa cells transiently transfected with either wild type VDR or a mutant consisting of only the VDR ligand binding domain. The VDR ligand binding domain bound [3H]1alpha,25(OH)2D3 as effectively as wild type VDR but did not induce vitamin D response element-mediated transcription. The anti-apoptotic effects of 1alpha,25(OH)2D3 and the 6-s-cis-locked 1alpha,25(OH)2-lumisterol3 analog in calvaria cells were blocked by three cytoplasmic kinase inhibitors: Src kinase inhibitor 4-amino-5-(4-methylphenyl)-7-(t-butyl)pyrazolo[3,4-d]pyrimidine (PP1), phosphatidylinositol 3 kinase inhibitor Wortmannin, and the JNK kinase inhibitor SP600125. However, inhibition of p38 with SB203580 or ERK with either U0126 or a transfected dominant negative MEK did not interfere with these anti-apoptotic actions. Further, 1alpha,25(OH)2D3 induced rapid (5 min) association of VDR with Src kinase in OB-6 cells. Finally, actinomycin D or cycloheximide prevented the anti-apoptotic effect of 1alpha,25(OH)2D3, indicating that transcriptional events are also required. These findings suggest that nongenotropic modulation of kinase activity is also a general property of the VDR and that ligands that activate nongenotropic signals, but lack transcriptional activity, display different biological profiles from the steroid hormone 1alpha,25(OH)2D3.

Mononuclear Titanium(IV)−Citrate Complexes from Aqueous Solutions: pH-Specific Synthesis and Structural and Spectroscopic Studies in Relevance to Aqueous Titanium(IV)−Citrate Speciation

Titanium is a metal frequently employed in a plethora of materials supporting medical applications. In an effort to comprehend the involvement of titanium in requisite biological interactions with physiological ligands, synthetic efforts were launched targeting aqueous soluble species of Ti(IV). To this end, aqueous reactions of TiCl(4) with citric acid afforded expediently, under pH-specific conditions, the colorless crystalline materials Na(6)[Ti(C(6)H(4.5)O(7))(2)(C(6)H(5)O(7))].16H(2)O (1) and Na(3)(NH(4))(3)[Ti(C(6)H(4.5)O(7))(2)(C(6)H(5)O(7))].9H(2)O (2). Complexes 1 and 2 were characterized by elemental analysis, FT-IR, (13)C-MAS solid state and solution NMR, cyclic voltammetry, and X-ray crystallography. 1 crystallizes in the triclinic space group P, with a = 15.511(9) A, b = 15.58(1) A, c = 9.848(5) A, alpha = 85.35(2) degrees, beta = 76.53(2) degrees, gamma = 61.97(2) degrees, V = 2042(2) A(3), and Z = 2. 2 crystallizes in the triclinic space group P, with a = 12.437(5) A, b = 12.440(5) A, c = 12.041(5) A, alpha = 83.08(2) degrees, beta = 81.43(2) degrees, gamma = 67.45(2) degrees, V = 1697(2) A(3), and Z = 2. The X-ray structures of 1 and 2 reveal the presence of a mononuclear complex, with Ti(IV) coordinated to three citrate ligands in a distorted octahedral geometry around Ti(IV). The citrates employ their central alkoxide and carboxylate groups to bind Ti(V), while the terminal carboxylates stay away from the Ti(IV)O(6) core. Worth noting in 1 and 2 is the similar mode of coordination but variable degree of protonation of the bound citrates, with the locus of (de)protonation being the noncoordinating terminal carboxylates. As a result, this work suggests the presence of a number of different Ti(IV)-citrate species of the same nuclearity and coordination geometry as a function of pH. This is consistent with the so far existing pool of mononuclear Ti(IV)-citrate species and provides a logical account of the aqueous speciation in the requisite binary system. Such information is vital in trying to delineate the interactions of soluble and bioavailable Ti(IV) forms promoting biological interactions in humans. To this end, chemical properties, structural attributes, and speciation links to potential ensuing biological effects are dwelled on.

1alpha,25(OH)2D3 regulation of integrin expression is substrate dependent

Osteoblasts are attachment-dependent cells that interact with their surface through integrin-mediated mechanisms. Their differentiation is regulated by 1,25-dihydroxyvitamin D3 [1alpha,25(OH)(2)D(3)] and is affected by substrate chemistry and microtopography, suggesting that 1alpha,25(OH)(2)D(3) may regulate integrin expression in a surface-specific manner. To test this hypothesis, osteoblast-like human MG63 cells were grown on tissue culture plastic and on grit-blasted and acid-etched titanium disks with a complex microtopography to induce osteoblast differentiation. Expression of alpha(2), alpha(5), alpha(v), beta(1), and beta(3) integrins were quantified by real-time polymerase chain reaction (PCR) as a function of time in culture and treatment with 1alpha,25(OH)(2)D(3). Results were correlated with expression of osteocalcin, a marker of a differentiated osteoblast. Osteocalcin mRNA increased with time and 1alpha,25(OH)(2)D(3) treatment and these changes were greater in cultures on the titanium disks. Integrin expression varied with time in culture and this was also surface dependent. At each time point, beta(1) and alpha(2) mRNAs were greater on titanium than on plastic, whereas alpha(5) expression was reduced and alpha(v),beta(3) expression was unaffected. 1alpha,25(OH)(2)D(3) increased beta(1) mRNA on both surfaces at all time points, but it increased alpha(2) expression only in 8-d cultures. 1alpha,25(OH)(2)D(3) caused reduced alpha(5) expression only in cultures grown on plastic for 8 d, and had no effect on either alpha(v) or beta(3) expression regardless of surface. These results show that integrin expression in human osteoblast-like cells is differentially modulated by 1alpha,25(OH)(2)D(3) in a time-dependent manner that is sensitive to the surface on which the cells are grown.

A systematic review of the influence of different titanium surfaces on proliferation, differentiation and protein synthesis of osteoblast-like MG63 cells

OBJECTIVES

Titanium is the standard material for dental and orthopaedical implants. The good biocompatibility has been proven in many experimental and clinical investigations. Different titanium topographies were tested in vitro using different cell culture models. The aim of this systematic review was to evaluate and summarize the medical/dental literature to assess on which kind of titanium surface structure the osteoblast-like osteosarcoma cells MG63 show the best proliferation and differentiation rate, and the best protein synthesis.

METHODS

A systematic search was carried out using different on-line databases (PubMed, Web of Science, Cochrane Library, International Poster Journal), supplemented by handsearch in selected journals and by examination of the bibliographies of the identified articles. Inclusion and exclusion criterias were applied when considering relevant articles. Studies which met the inclusion criteria were included and data extraction was undertaken by one reviewer.

RESULTS

The search yielded 348 references. Nine articles referring to nine different studies were relevant to our question. Additionally 8 less relevant articles were identified. It was found that regularly textured surfaces of pure titanium with R(a) values (average roughness) of around 4 mum are well-accepted by MG63 cells.

CONCLUSIONS

The surfaces and culture conditions vary widely. Therefore it is still difficult to recommend one particular surface. It seems that there are no differences in cell proliferation and differentiation on surfaces treated by blasting and etching. Standardization in fabrication and size of the different test surfaces as well as homogeneity in culture times and plating densities should be aspects for future research.