Effect of chitosan-polyvinyl pyrrolidone hydrogel on proliferation and cytokine expression of endothelial cells: implications in islet immunoisolation

Lyophilized Polyvinylpyrrolidone Hydrogel for Culture of Human Oral Mucosa Stem Cells

This work shows the synthesis of a polyvinylpyrrolidone (PVP) hydrogel by heat-activated polymerization and explores the production of hydrogels with an open porous network by lyophilisation to allow the three-dimensional culture of human oral mucosa stem cells (hOMSCs). The swollen hydrogel showed a storage modulus similar to oral mucosa and elastic solid rheological behaviour without sol transition. A comprehensive characterization of porosity by scanning electron microscopy, mercury intrusion porosimetry and nano-computed tomography (with spatial resolution below 1 μm) showed that lyophilisation resulted in the heterogeneous incorporation of closed oval-like pores in the hydrogel with broad size distribution (5 to 180 μm, d₅₀ = 65 μm). Human oral mucosa biopsies were used to isolate hOMSCs, expressing typical markers of mesenchymal stem cells in more than 95% of the cell population. Direct contact cytotoxicity assay demonstrated that PVP hydrogel have no negative effect on cell metabolic activity, allowing the culture of hOMSCs with normal fusiform morphology. Pore connectivity should be improved in future to allow cell growth in the bulk of the PVP hydrogel.

Hemostyptic property of chitosan: Opportunities and pitfalls

BACKGROUND

Chitosan is used in a wide field of applications and therapies and has been reported to be an effective hemostyptic. The objective of this study was to provide further information about the use of chitosan as a hemostyptic agent also taking into focus its hemocompatible effects.

METHODS

Human whole blood (n=5) was anticoagulated with heparin, treated with different chitosan concentrations (0, 2.5, 5, 7.5, 10, 12.5, 25 mg/mL) and incubated at 37°C for 30 minutes. Before and after incubation different parameters for coagulation and hemocompatibility were evaluated.

RESULTS

Blood treated with high chitosan concentrations showed enhanced coagulation, which we evaluated with activated clotting time, activated partial thromboplastin time and concentration of thrombin-antithrombin complexes. Furthermore, we observed an activation of blood platelets, complement cascade and granulocytes in the groups treated with chitosan.

CONCLUSION

Our data indicate that chitosan activates human blood coagulation and hence has good properties as a hemostyptic agent. However, inflammatory parameters were upregulated after direct contact with human blood indicating that systemic administration of chitosans should not be performed whereas the topical use of chitosan as a hemostypticum should not present any hazard with regard to adverse inflammatory reactions at the site of application.

Cholesterol Tethered Poly(DL-Lactic Acid) for Promoting Osteoblast Attachment and Growth

In poly(DL-lactic acid)-cholesterol oligomers (LC), a novel cholesterol modified poly(DL-lactic acid) (PLA), was synthesized via bulk polymerization of DL-lactide using cholesterol initiator. Gel permeation chromatography (GPC) and 1H nuclear magnetic resonance spectroscopy (1H-NMR) results indicated a narrow molecular weight distribution of poly (DL-lactic acid)-cholesterol oligomers (LC). Mouse MC3T3 osteoblast-like cells were selected as a model system to test the cell behavior of cholesterol modified PLA substrates. The osteoblast attachment, proliferation, and viability revealed that the cholesterol modified PLA was significantly osteoblast compatible and may have potential as a bone tissue engineering material.

Endotoxins affect diverse biological activity of chitosans in matters of hemocompatibility and cytocompatibility

Chitosan is used in several pharmaceutical and medical applications, owing to its good cytocompatibility and hemocompatibility. However, there are conflicting reports regarding the biological activities of chitosan with some studies reporting anti-inflammatory properties while others report pro-inflammatory properties. In this regards we analyzed the endotoxin content in five different chitosans and examined these chitosans with their different deacetylation degrees for their hemocompatibility and cytocompatibility. Therefore, we incubated primary human endothelial cells or whole blood with different chitosan concentrations and studied the protein and mRNA expression of different inflammatory markers or cytokines. Our data indicate a correlation of the endotoxin content and cytokine up-regulation in whole blood for Poly-Morpho-Nuclear (PMN)-Elastase, soluble terminal complement complex SC5b-9, complement component C5/C5a, granulocyte colony-stimulating factor, Interleukin-8 (IL), IL-10, IL-13, IL-17E, Il-32α and monocyte chemotactic protein-1. In contrast, the incubation of low endotoxin containing chitosans with primary endothelial cells resulted in increased expression of E-selectin, intercellular adhesion molecule-1, vascular cell adhesion protein-1, IL-1β, IL-6 and IL-8 in endothelial cells. We suggest that the endotoxin content in chitosan plays a major role in the biological activity of chitosan. Therefore, we strongly recommend analysis of the endotoxin concentration in chitosan, before further determining if it has pro- or anti-inflammatory properties or if it is applicable for pharmaceutical and medical fields.

Zwitterionic chitosan derivative, a new biocompatible pharmaceutical excipient, prevents endotoxin-mediated cytokine release

Chitosan is a cationic polymer of natural origin and has been widely explored as a pharmaceutical excipient for a broad range of biomedical applications. While generally considered safe and biocompatible, chitosan has the ability to induce inflammatory reactions, which varies with the physical and chemical properties. We hypothesized that the previously reported zwitterionic chitosan (ZWC) derivative had relatively low pro-inflammatory potential because of the aqueous solubility and reduced amine content. To test this, we compared various chitosans with different aqueous solubilities or primary amine contents with respect to the intraperitoneal (i.p.) biocompatibility and the propensity to induce pro-inflammatory cytokine production from macrophages. ZWC was relatively well tolerated in ICR mice after i.p. administration and had no pro-inflammatory effect on naïve macrophages. Comparison with other chitosans indicates that these properties are mainly due to the aqueous solubility at neutral pH and relatively low molecular weight of ZWC. Interestingly, ZWC had a unique ability to suppress cytokine/chemokine production in macrophages challenged with lipopolysaccharide (LPS). This effect is likely due to the strong affinity of ZWC to LPS, which inactivates the pro-inflammatory function of LPS, and appears to be related to the reduced amine content. Our finding warrants further investigation of ZWC as a functional biomaterial.

Chitosan, gelatin and poly(L-lysine) polyelectrolyte-based scaffolds and films for neural tissue engineering

Biomaterial implants are a promising strategy to replace neural tissue that is lost after traumatic nerve damage. Chitosan (Ch) is a suitable material for nerve implantation when it is used at a minimum amount of 2% (w/v). The goal of this study was to determine the best mixture of 2% Ch with gelatin (G) and poly(L-lysine) (PLL) for use in neural tissue engineering. Using different physicochemical approaches we showed that all mixtures formed polyelectrolyte complexes with distinct electrostatic interactions between their compounds. This gave rise to different gel morphologies, among which Ch + G exhibited a significantly smaller pore size, unlike Ch + G + PLL. However, thermal resistance to degradation and the wettability of the Ch-based films were not affected. Additionally, these differences affected glial cells growth in long-term (14 days) cultures performed on Ch-based films. Astrocytes and olfactory ensheathing cells proliferated on G and Ch + G films which induced both flattened and spindle cell morphologies. Meanwhile, cortical and hippocampal neurons were similarly viable in all studied films and significantly lower than those observed in controls. Lastly, neurites from dorsal root ganglia extended the most on Ch + G films. These results show that a Ch + G mixture is a promising candidate for use in neural tissue engineering.

Labeling transplanted mice islet with polyvinylpyrrolidone coated superparamagnetic iron oxide nanoparticles for in vivo detection by magnetic resonance imaging

Superparamagnetic iron oxide nanoparticles (SPIO) are emerging as a novel probe for noninvasive cell tracking with magnetic resonance imaging (MRI) and have potential wide usage in medical research. In this study, we have developed a method using high-temperature hydrolysis of chelate metal alkoxide complexes to synthesize polyvinylpyrrolidone coated iron oxide nanoparticles (PVP-SPIO), as a biocompatible magnetic agent that can efficiently label mice islet beta-cells. The size, crystal structure and magnetic properties of the as-synthesized nanoparticles have been characterized. The newly synthesized PVP-SPIO with high stability, crystallinity and saturation magnetization can be efficiently internalized into beta-cells, without affecting viability and function. The imaging of 100 PVP-SPIO-labeled mice islets in the syngeneic renal subcapsular model of transplantation under a clinical 3.0 T MR imager showed high spatial resolution in vivo. These results indicated the great potential application of the PVP-SPIO as an MRI contrast agent for monitoring transplanted islet grafts in the clinical management of diabetes in the near future.

The effect of a cholesterol liquid crystalline structure on osteoblast cell behavior

To investigate the effect of a liquid crystalline structure on cell behavior, polymethylsiloxane-graft-(10-cholesteryloxydecanol) was specially designed to get a thermotropic liquid crystalline polymer. Results of Fourier transform infrared (FT-IR) spectroscopy, proton nuclear magnetic resonance (1H-NMR) spectroscopy and gel permeation chromatography (GPC) indicated that cholesterol was successfully covalently grafted onto polymethylhydrosiloxane via decamethylene 'flexible spacer'. Differential scanning calorimetry (DSC) and polarized optical microscopy (POM) investigations revealed that the copolymer with 44.9% mesogenic unit showed obvious thermotropic liquid crystalline transition at about 124.9 degrees C. Polymer films were prepared by spin coating on clean glass plates from 5 mg ml(-1) toluene solutions of the copolymers. The POM investigation indicated that while the unannealed films (SC15, SC45) showed no liquid crystalline structure, the films which were annealed in vacuo at 140 degrees C for 9 h and then quenched to room temperature (SC15C, SC45C) formed discrete island-like liquid crystalline and continuous liquid crystalline structures, respectively. Osteoblast cells (MC3T3) were chosen to test the cell behavior of annealed and unannealed films. In comparison to unannealed films, the annealed films with a cholesterol liquid crystalline structure could promote osteoblast cell attachment and growth significantly.

Surface tailoring of poly(ethylene terephthalate) via ligand-tethered comb-like PEG to enhance endothelialization

The comb-like PEG (CPEG) end-tethered with L-lysine was explored to surface modification of PET to enhance endothelialization. The hydroxyl end groups of CPEG were oxygenated into aldehyde groups. The CPEG-CHO was grafted onto the aminolysized PET. The L-lysine was then end-tethered onto surface via the residual aldehyde groups. The surface modification was confirmed by ATR-FTIR, contact angle and XPS measurements. The endothelial cell adhesion, proliferation and viability results indicated that the PET-CPEG resisted cell adhesion and growth, where as PET-CPEG-lysine promoted cell adhesion and growth. The MTT assay and total cell protein tests indicated that the endothelial cells on PET-CPEG-lysine had high viability. Cell spread uniformly and covered completely on the PET-CPEG-lysine. The CPEG end tethered with L-lysine could regulate cell adhesion and growth and enhance surface endothelialization.

Cytocompatibility of poly(acrylonitrile-co-N-vinyl-2-pyrrolidone) membranes with human endothelial cells and macrophages

Polyacrylonitrile modified with N-vinyl-2-pyrrolidone (NVP) shows good hemocompatibility. This work, which aims to evaluate the cytocompatibility of membranes fabricated from poly(acrylonitrile-co-N-vinyl-2-pyrrolidone) (PANCNVP), studied the adhesion of macrophages and endothelial cell (EC) cultures. It was found that PANCNVP membranes with higher NVP content decreased the adhesion of both macrophages and ECs. Compared with polyacrylonitrile and tissue culture polystyrene control, however, these PANCNVP membranes promoted the proliferation of ECs. Furthermore, the viability of ECs cultured on the PANCNVP membrane surfaces was also relatively competitive. Both static and dynamic water contact angle measurements were conducted to explain the nature of cell adhesion to the PANCNVP membranes. On the basis of these results and the phenomena of water swelling and water states reported previously, it was presumed that the coexistence of large amounts of bound water and free water induced by NVP moieties are responsible for the lower adhesion and better function of cells adhering to the PANCNVP membranes.

Photocrosslinkable hydrogel for myocyte cell culture and injection

Conventional treatment options for myocardial infarction are limited by the inability of mature myocardium to regenerate after injury. Although functional improvements after injection of cells and growth factors have been demonstrated, the clinical utility of this procedure has been hampered by poor cell localization, low survival, and rapid clearance of injected growth factors. The main objective of this study was to evaluate the applicability of a hydrogel, based on photocrosslinkable chitosan and acryloyl-poly(ethylene glycol)-RGDS (Az-chitosan/Acr-PEG-RGD) for myocyte cell culture and myocardial injection. Chitosan was modified with photoreactive azidobenzoic acid and Acr-PEG-RGD was synthesized by reacting YRGDS with an equimolar amount of acryloyl-PEG-N-hydroxysuccinimide. For injection and encapsulation each polymer was dissolved in Di-H(2)O (pH 6.4), the solutions were mixed and crosslinked by UV application (4 mW/cm(2)). C2C12 myoblasts proliferated and differentiated on hydrogels containing 5 mM RGD but not on the pure photocrosslinked chitosan. In vitro, the crosslinked hydrogels retained 80% of encapsulated VEGF for 24 days. Live/dead staining of neonatal rat cardiomyocytes encapsulated into Az-chitosan/Acr-PEG-RGD hydrogels indicated high cell viability upon UV crosslinking. Ex vivo, we localized the hydrogel on the surface and in the ventricle wall of an adult rat heart by brief (2 min) UV light application.

Synthesis and characterization of cholesterol-poly(ethylene glycol)-poly(D,L-lactic acid) copolymers for promoting osteoblast attachment and proliferation

A novel cholesterol-poly(ethylene glycol)-poly(D,L-lactic acid) copolymer (CPEG-PLA) has been synthesized as a potential surface additive for promoting osteoblast attachment and proliferation. The gel permeation chromatography (GPC) and nuclear magnetic resonance spectroscopy (NMR) results indicated the product had expected structure with low polydispersities in the range of 1.1-1.5. By blending the poly(D,L-lactic acid) (PLA) with CPEG-PLA, the surface of modified PLA membrane was investigated by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle. The results revealed the enrichment of PEG chain on the surface. Osteoblast cell line (MC3T3) was chosen to test the cell behavior on modified PLA membranes. The osteoblast test about cell attachment, proliferation, cell viability and cell morphology investigation on CPEG-PLA modified PLA substrates showed the CPEG-PLA with 15 and 5 ethylene glycol units promoted osteoblast attachment and growth, while the CPEG-PLA with 30 ethylene glycol units prevent osteoblast adhesion and proliferation. This simple surface treatment method may have potentials for tissue engineering and other biomedical applications.

Effects of chitosan nonwoven membrane on periodontal healing of surgically created one-wall intrabony defects in beagle dogs

The purpose of this study was to investigate the periodontal regenerative effects of a chitosan nonwoven membrane applied to surgically created preclinical one-wall intrabony defects in beagle dogs. One-wall intrabony defects (4 x 4 x 4 mm) were surgically created bilaterally in the mandibular second and fourth premolars of six beagle dogs. The surgical control group received a flap operation only. The resorbable-membrane (RM) group was treated with resorbable membrane. The chitosan-nonwoven-membrane (CNWM) group was treated with chitosan nonwoven membrane. The amount of junctional epithelium migration and the amount of connective tissue adhesion did not show any statistically significant differences among the groups. However, the amount of suprabony cementum regeneration, intrabony cementum regeneration, and alveolar bone regeneration showed significant differences (p < 0.05) between CNWM site group and control group. The results demonstrate the regenerative effects of the chitosan nonwoven membrane in one-wall intrabony defects of beagle dogs. The chitosan nonwoven membrane has the potential to support the cementum and bone regeneration, possibly by providing the conditions needed for guided tissue regeneration in the one-wall intrabony periodontal defects of beagle dogs.

Surface tailoring of poly(dl-lactic acid) by ligand-tethered amphiphilic polymer for promoting chondrocyte attachment and growth

The ligand-tethered poly(ethylene oxide-propylene oxide-ethylene oxide) (PEO-PPO-PEO) triblock copolymer was explored to engineer poly(DL-lactic acid) (PDL-LA) material to promote cell attachment and growth. The PEO-PPO-PEO was activated by methyl sulfonyl chloride and the amino acid, and peptide were attached. By blending the PDL-LA with the ligand-tethered PEO-PPO-PEO derivatives, the surface of modified PDL-LA film was investigated by ATR-FTIR, XPS and contact angle. The chondrocytes test on different PDL-LA films indicated that the PEO-PPO-PEO amino acid and RGD derivatives modified PDL-LA films could promote chondrocyte attachment and growth. This simple surface treatment method may have potentials for tissue engineering and other biomedical applications.

Endothelial cells grown on thin polyelectrolyte mutlilayered films: an evaluation of a new versatile surface modification

Endothelial cell seeding constitutes an appreciated method to improve blood compatibility of small-diameter vascular grafts. In this study, we report the development of a simple innovative technique based on multilayered polyelectrolyte films as cell adhesive substrates. Polyelectrolyte multilayered films ending by poly(sodium-4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) or poly(L-glutamic acid)/poly(D-lysine) (PGA/PDL) could enhance cell adhesion by modification of the physico-chemical properties of the surface. The biological responses of human umbilical vein endothelial cells seeded on the polyelectrolyte multilayer films, on PDL or PAH monolayers, and on control surfaces, were evaluated in terms of initial attachment, growth, cellular metabolic activity, endothelial phenotype, and adhesion. The results showed that polyelectrolyte multilayers neither induce cytotoxic effects nor alter the phenotype of the endothelial cells. The polyelectrolyte multilayered films enhanced initial cell attachment as compared to the polyelectrolyte monolayer. Cell growth observed on the films was similar to that on TCPS. Among the different coating tested, the film ending by PSS/PAH exhibited an excellent cellular biocompatibility and appeared to be the most interesting surface in terms of cellular adhesion and growth. Such films could be used to cover hydrophobic (cell resistant) substrates in order to promote cell colonization, thereby constituting an excellent material for endothelial cell seeding.

Implantable applications of chitin and chitosan

Chitin, extracted primarily from shellfish sources, is a unique biopolymer based on the N-acetyl-glucosamine monomer. More than 40 years have lapsed since this biopolymer had aroused the interest of the scientific community around the world for its potential biomedical applications. Chitin, together with its variants, especially its deacetylated counterpart chitosan, has been shown to be useful as a wound dressing material, drug delivery vehicle and increasingly a candidate for tissue engineering. The promise for this biomaterial is vast and will continue to increase as the chemistry to extend its capabilities and new biomedical applications are investigated. It is interesting to note that a majority of this work has come from Asia. Japan has been the undisputed leader, but other Asian nations, namely Korea, Singapore, Taiwan and Thailand have also made notable contributions. More recently, China has joined the club to become an increasingly major research source for chitin and chitosan in Asia. This review surveys select works of key groups in Asia developing chitin and chitosan materials for implantable biomedical applications.

Surface engineering of poly(DL-lactide) via electrostatic self-assembly of extracellular matrix-like molecules

We report the development of new biomacromolecule coatings on biodegradable biomaterials based on electrostatic assembly of extracellular matrix-like molecules. Poly(ethylene imine) (PEI) was employed to engineer poly(dl-lactide) (PDL-LA) substrate to obtain a stable positively charged surface. An extracellular matrix- (ECM-) like biomacromolecule, gelatin, was selected as the polyelectrolyte to deposit on the activated PDL-LA substrate via the electrostatic assemble technique. The extracellular matrix-like multilayer on the PDL-LA substrate was investigated by attenuated total reflection (ATR-FTIR), X-ray photoelectron spectrscopy (XPS), contact angle, and atomic force microscopy (AFM). The gradual buildup of the protein layer was investigated by UV-vis spectra, and it was further given a quantitative analysis of the protein layer on the PDL-LA substrate via the radioiodination technique. The stability of the protein layer under aqueous condition was also tested by the radiolabeling method. Chondrocyte was selected as the model system for testing the cell behavior and morphology on modified PDL-LA substrates. The chondrocyte test about cell attachment, proliferation, cell activity and cell morphology by SEM, and confocal laser scanning microscopy (CLSM) investigation on extracellular matrix-like multilayer modified PDL-LA substrate was shown to promote chondrocyte attachment and growth. Comparing conventional coating methods, polyelectrolyte multiplayers are easy and stable to prepare. It may be a good choice for the modification of 3-D scaffolds used in tissue engineering. These very flexible systems allow broad medical applications for drug delivery and tissue engineering.

Surface engineering of poly(D,L-lactic acid) by entrapment of chitosan-based derivatives for the promotion of chondrogenesis

Chitosan and chitosan-amino acid derivatives were explored to engineer poly(D,L-lactic acid) (PDL-LA) as an extracellular matrix-like surface to promote cell adhesion and growth. Four kinds of chitosan-amino acid derivatives were prepared to mimic the carbohydrate moieties of cell matrix glycoprotein. The chitosan-amino acid derivatives were characterized by using Fourier transform infrared and ultraviolet spectra. The amino acid content on chitosan-amino acid derivatives was determined by using a ninhydrin-ultraviolet method. A new strategy, entrapment, was therefore used to modify the PDL-LA membrane with chitosan and chitosan-amino acid derivatives. The results of X-ray photoelectron spectroscopy, attenuated total reflectance-Fourier transform infrared, and contact angle confirmed that a stable thin film of chitosan and its derivatives can be entrapped on the surface of the PDL-LA membrane. From the results of chondrocyte cytocompatibility, MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assays, and cell morphology, the chitosan-amino acid derivative modified PDL-LA membranes were shown to promote chondrogenesis. The novel surface treatment method combines the good mechanical property of PDL-LA with the good cytocompatibility of chitosan derivatives, which may have potential for tissue engineering.

Surface engineering of poly(DL-lactic acid) by entrapment of alginate-amino acid derivatives for promotion of chondrogenesis

Alginate-amino acid derivatives were explored to engineer poly(DL-lactic acid)(PDL-LA) as glycocalyx-like surface to promote cell adhesion and growth. Four different kinds of alginate-amino acid derivatives were synthesized to mimic the glycocalyx of cell membrane to promote chondrogenesis. The alginate-amino acid derivatives were characterized by FT-IR, 1H NMR and UV spectra and the amino acid content on alginate-amino acid derivatives was given by ninhydrin-UV method. A new strategy, entrapment, was then employed to modify PDL-LA membranes with alginate and its amino acid derivatives. The results of XPS, ATR-FTIR and contact angle confirmed that a stable thin film of alginate and its amino acid derivatives can be entrapped on the surface of PDL-LA membrane. The chondrocyte cytocompatibility test and MTT assays indicated that the alginate-amino acid derivatives modified PDL-LA membranes could promote chondrogenesis. The novel surface treatment method may have potentials for tissue engineering and other biomedical applications.