Determination of salbutamol in syrups by capillary electrophoresis with contactless conductivity detection (CE-C4D)

This paper describes the separation and quantification of salbutamol in pharmaceutical products (salbutamol syrups) by capillary electrophoresis (CE) with contactless conductivity detection (C(4)D). The system was studied by micellar electrokinetic capillary chromatography (MEKC) and free solution capillary electrophoresis (FSCE), being the latter chosen in function of best resolution and sensitivity in comparison with the MEKC method. CE-C(4)D was applied to analysis of salbutamol in syrups utilizing 1.0 x 10(-2) molL(-1) acetic acid/sodium acetate buffer (pH 4.9) as running electrolyte. Tetraethylammonium (TEA) solution was used as internal standard. The results obtained include a linear dynamic range from 7. x 10(-5) to 3.0 x 10(-4) molL(-1) and good repeatability (R.S.D.=4.7% for n=10 for a 7.0 x 10(-5) molL(-1) salbutamol solution). The detection limit was calculated as 1.0 x 10(-5) molL(-1) and the limit of quantification was estimated as 3.3 x 10(-5) molL(-1). For syrups analysis the reproducibility presented deviations between 1.5% and 2.5% (three different days) obtained for measurements in triplicate.

Optimizing the analytical performance and construction of ion-selective electrodes with conducting polymer-based ion-to-electron transducers

All-solid-state ion-selective electrodes that use a conducting polymer as the ion-to-electron transducer have emerged as one of the most promising classes of all-solid-state potentiometric sensors in recent years. This is largely because it has many analytical advantages, including high response stability, which is unique in the field of internal-solution-free ion-selective electrodes. This paper reviews the considerable progress that has been made in this area of sensing in recent years, in terms of detection limits, selectivity coefficients and novel construction methods.

Construction and characterization of potentiometric sensor for the determination of oxytetracycline hydrochloride

The construction and performance of plastic membrane (PME) oxytetracycline hydrochloride (OTC)-selective electrodes, based on three types of ion-pairs, OTC-tetraphenylborate (TPB), OTC-phosphotungstate (PT) and OTC-silicotungstate (SiT), as the electroactive substance in a plasticized PVC membrane with dibutylphthalate (DBP), were described. Furthermore, internal solid contact sensors (ISCS) OTC-selective sensors, based on a conducting polypyrrole (PPy) film immobilized on a platinum or glassy carbon electrode surface casted by a plasticized PVC membrane were constructed and evaluated. A novel optimization methodology in a numerical expression, comprehensive quality index (CQI) for a sensor, was used to optimize the composition of the membrane in the preparation of PME and screen the parameter of electropolymerization in the preparation of ISCS. Several PMEs and ISCSs were fully characterized and evaluated. An ISCS (Pt/PPy/PVC (OTC-TPB)) showed an excellent Nernstian response over the linear concentration range of 4.0 x 10(-7)-5.0 x 10(-2) M with the slope of 60.6 mV per decade (at 25 degrees C). The limit of detection was 1.0 x 10(-7) M of OTC (0.03 ppm). The response time was <25 s. The sensor was successfully used for the analysis of OTC in pharmaceutical formulation by using direct potentiometry.