Microchip-based amperometric immunoassays using redox tracers

Antibody-Electroactive Probe Conjugates Based Electrochemical Immunosensors

Suitable immobilization of a biorecognition element, such as an antigen or antibody, on a transducer surface is essential for development of sensitive and analytically reliable immunosensors. In this review, we report on (1) methods of antibody prefunctionalization using electroactive probes, (2) methods for immobilization of such conjugates on the surfaces of electrodes in electrochemical immunosensor construction and (3) the use of antibody-electroactive probe conjugates as bioreceptors and sensor signal generators. We focus on different strategies of antibody functionalization using the redox active probes ferrocene (Fc), anthraquinone (AQ), thionine (Thi), cobalt(III) bipyridine (Co(bpy)33+), Ru(bpy)32+ and horseradish peroxidase (HRP). In addition, new possibilities for antibody functionalization based on bioconjugation techniques are presented. We discuss strategies of specific, quantitative antigen detection based on (i) a sandwich format and (ii) a direct signal generation scheme. Further, the integration of different nanomaterials in the construction of these immunosensors is presented. Lastly, we report the use of a redox probe strategy in multiplexed analyte detection.

Capillary electrophoresis-based immunoassay and aptamer assay: A review

Over the last two decades, the group of techniques called affinity probe CE has been widely used for the detection and the determination of several types of biomolecules with high sensitivity. These techniques combine the low sample consumption and high separation power of CE with the selectivity of the probe to the target molecule. The assays can be defined according to the type of probe used: CE immunoassays, with an antibody as the probe, or aptamer-based CE, with an aptamer as the probe. Immunoassays are generally divided into homogeneous and heterogeneous groups, and homogeneous variant can be further performed in competitive or noncompetitive formats. Interacting partners are free in solution at homogeneous assay, as opposed to heterogeneous analyses, where one of them is immobilized onto a solid support. Highly sensitive fluorescence, chemiluminescence or electrochemical detections were typically used in this type of study. The use of the aptamers as probes has several advantages over antibodies such as shorter generation time, higher thermal stability, lower price, and lower variability. The aptamer-based CE technique was in practice utilized for the determination of proteins in biological fluids and environmentally or clinically important small molecules. Both techniques were also transferred to microchip. This review is focused on theoretical principles of these techniques and a summary of their applications in research.

A homogeneous immunoassay of thyroxine based on microchip electrophoresis and chemiluminescence detection

A homogeneous chemiluminescent immunoassay of thyroxine (T4) present in serum samples is described. The proposed method deployed the competitive immunoreaction of T4 and horseradish peroxidase (HRP)-labeled T4 (HRP-T4) with anti-T4 mouse monoclonal antibody (Ab). HRP-T4 and the HRP-T4-Ab complex were separated and quantified by using microchip electrophoresis (MCE) with chemiluminescence (CL) detection. The MCE separation was accomplished within 60 s. Highly sensitive CL detection was achieved by means of HPR-catalyzed luminol-H(2)O(2) reaction. The linear range for T4 was 5-250 nM with a detection limit of 2.2 nM (S/N = 3).

Microfluidics in protein chromatography

The development of microfluidics and its utilization in a myriad of applications has grown exponentially over the past 15 years. One area that has benefited from the great strides in fabrication of microelectromechanical systems (MEMS) is separations chemistry. Most studies have focused on small molecule and DNA separations; few on protein chromatographic techniques on microchips. This review details recent developments in protein separations on microfluidic platforms and how MEMS have the potential for revolutionizing protein chromatography.

Immunoassays in microfluidic systems

Immunoassays have greatly benefited from miniaturization in microfluidic systems. This review, which summarizes developments in microfluidics-based immunoassays since 2000, includes four sections, focusing on the configurations of immunoassays that have been implemented in microfluidics, the main fluid handling modalities that have been used for microfluidic immunoassays, multiplexed immunoassays in microfluidic platforms, and the emergence of label-free detection techniques. The field of microfluidic immunoassays is continuously improving and has great promise for the future.

Immuno-like assays and biomimetic microchips

Biomimetic assays with molecularly imprinted polymers (MIPs) are bound to be an alternative to the traditional immuno-analytical methods based on antibodies. This is due to the unique combination of advantages displayed by the artificial materials including the absence of animal inoculation and sacrifice, unnecessary hapten conjugation to a carrier protein for stimulated production, the possibility of manufacturing MIPs against toxic substances, excellent physicochemical stability, reusability, ease of storage, and recognition in organic media. If the selectivity and affinity of MIPs are increased, many more immuno-like assays will be developed using radioactive, enzymatic, colorimetric, fluorescent, chemiluminescent, or electrochemical interrogation methods. This chapter provides a comprehensive comparison between the bio- and biomimetic entities and their usage.

Chemiluminescent immunoassay of thyroxine enhanced by microchip electrophoresis

A homogeneous chemiluminescent immunoassay of thyroxine (T4) enhanced by microchip electrophoresis separation has been developed. The method deployed the competitive immunoreaction of T4 and horseradish peroxidase (HRP)-labeled T4 (HRP-T4) with anti-T4 mouse monoclonal antibody (Ab). HRP-T4 and the HRP-T4-Ab complex were separated and quantified by using microchip electrophoresis (MCE) with chemiluminescence (CL) detection. Highly sensitive CL detection was achieved by means of HPR-catalyzed luminol-H(2)O(2) reaction. Due to the effective MCE separation, the CL analytical signal was less prone to sample matrix interference. Under the selected assay conditions, the MCE separation was accomplished within 60s. The linear range for T4 was 5-250 nM with a detection limit of 2.2 nM (signal/noise ratio=3). The current method was successfully applied for the quantification of T4 in human serum samples. It was demonstrated that the current MCE-CL-enhanced competitive immunoassay was quick, sensitive, and highly selective. It may serve as a tool for clinical analysis of T4 to assist in the diagnosis of thyroid gland functions.

Point-of-care testing of proteins

Point-of-care testing (POCT) is a fast developing area in clinical diagnostics that is considered to be one of the main driving forces for the future in vitro diagnostic market. POCT means decentralized testing at the site of patient care. The most important POCT devices are handheld blood glucose sensors. In some of these sensors, after the application of less than 1 microl whole blood, the results are displayed in less than 10 s. For protein determination, the most commonly used devices are based on lateral flow technology. Although these devices are convenient to use, the results are often only qualitative or semiquantitative. The review will illuminate some of the current methods employed in POCT for proteins and will discuss the outlook for techniques (e.g., electrochemical immunosensors) that could have a great impact on future POCT of proteins.

Electrochemical biochips for protein analysis

Proteins bear important functions for most life processes. It is estimated that the human proteome comprises more than 250,000 proteins. Over the last years, highly sophisticated and powerful instruments have been developed that allow their detection and characterization with great precision and sensitivity. However, these instruments need well-equipped laboratories and a well-trained staff. For the determination of proteins in a hospital, in a doctor's office, or at home, low-budget protein analysis methods are needed that are easy to perform. In addition, for a proteomic approach, highly parallel measurements with small sample sizes are required. Biochips are considered as promising tools for such applications. The following chapter describes electrochemical biochips for protein analysis that use antibodies or aptamers as recognition elements.

Ferrocene-based derivatization in analytical chemistry

Ferrocene-based derivatization has raised considerable interest in many fields of analytical chemistry. This is due to the well-established chemistry of ferrocenes, which allows rapid and easy access to a large number of reagents and derivatives. Furthermore, the electrochemical properties of ferrocenes are attractive with respect to their detection. This paper summarizes the available reagents, the reaction conditions and the different approaches for detection. While electrochemical detection is still most widely used to detect ferrocene derivatives, e.g., in the field of DNA analysis, the emerging combination of analytical separation methods with electrochemistry, mass spectrometry and atomic spectroscopy allows ferrocenes to be applied more universally and in novel applications where strongly improved selectivity and limits of detection are required.

Electrochemical detection of HbA1c, a maker for diabetes, using a flow immunoassay system

An on-chip electrochemical flow immunoassay system for the detection of hemoglobin A1c (HbA1c) was developed using anti-human hemoglobin (Hb) IgG labeled with ferrocene monocarboxylic acid (Fc-COOH) and boronate-affinity chromatography. An on-chip column packed with boronate-activated agarose beads was used for the separation of HbA1c from both non-glycated Hb and free antibody. Anti-human Hb IgG conjugated to Fc-COOH (Fc-IgG) was used for the electrochemical detection of HbA1c. The assay procedure included immunoreactions with Fc-IgG and HbA1c, separation of immunocomplexes by boronate affinity, and electrochemical detection of Fc-IgG-HbA1c immunocomplexes. The immunoreaction mixtures were injected onto a boronate-affinity column. HbA1c-antibody complexes were then trapped onto the column by the affinity of HbA1c to boronic acid. Subsequently, elution buffer containing sorbitol was applied to elute HbA1c-antibody complexes and a current was detected by applying 600 mV versus Ag/AgCl. The elution signal was an estimation of the HbA1c amount. A linear correlation between the increase of current and HbA1c concentration was obtained up to an HbA1c concentration of 500 microg/ml. The HbA1c flow immunoassay was successfully achieved using hemolysates. This electrochemical flow immunoassay system enabled us to construct a novel point-of-care testing device for the monitoring of glycated proteins including HbA1c.

Biochemical and immunochemical characterization of the antigen–antibody reaction on a non-toxic biomimetic interface immobilized red blood cells of crucian carp and gold nanoparticles

A special protein assay system based on a highly hydrophilic, non-toxic and conductive biominetic interface has been demonstrated. To fabricate such assay system, red blood cells of crucian carp (RBC) was initially grown on a glassy carbon electrode surface (GCE) deposited nano-sized gold particles (GPs), a second gold nanoparticle layer (NG) was then absorbed on the RBC surface, and finally mammary cancer 15-3 antibody (anti-CA15-3) was attached on the functional RBC surface. A competitive immunoassay format was employed to detect CA15-3 with horseradish peroxidase (HRP)-labeled CA15-3 as tracer and hydrogen peroxide as enzyme substrate. When the immunosensor was incubated into a mixture solution containing HRP-labeled CA15-3 and CA15-3 sample for 1h at 37 degrees C, the amperometric response decreased with the increment of CA15-3 sample concentration. AFM images of the modified layer revealed a uniform distribution of protein and nanogold. In situ QCM and electrochemical measurements demonstrated that the wanted antibody-antigen reactions should occur with high specificity and selectivity. The specific immunoassay system can be developed further to yield sophisticated structures for other proteins.

Direct Electrochemical Immunoassay Based on Immobilization of Protein-Magnetic Nanoparticle Composites on to Magnetic Electrode Surfaces by Sterically Enhanced Magnetic Field Force

A direct electrochemical immunoassay system based on the immobilization of alpha-1-fetoprotein antibody (anti-AFP), as a model system, on the surface of core-shell Fe(2)O(3)/Au magnetic nanoparticles (MNP) has been demonstrated. To fabricate such an assay system, anti-AFP was initially covalently immobilized on to the surface of core-shell Fe(2)O(3)/Au MNP. Anti-AFP-modified MNP (bio-nanoparticles) were then attached to the surface of carbon paste electrode with the aid of a permanent magnet. The performance and factors influencing the performance of the resulting immunosensor were studied. alpha-1-Fetoprotein antigen was directly determined by the change in current or potential before and after the antigen-antibody reaction versus saturated calomel electrode. The electrochemical immunoassay system reached 95% of steady-state potential within 2 min and had a sensitivity of 25.8 mV. The linear range for AFP determination was from 1 to 80 ng AFP ml(-1) with a detection limit of 0.5 ng AFP ml(-1). Moreover, the direct electrochemical immunoassay system, based on a functional MNP, can be developed further for DNA sensor and enzyme biosensor.

Simplified current decoupler for microchip capillary electrophoresis with electrochemical and pulsed amperometric detection

There is a need to develop broadly applicable, highly sensitive detection methods for microchip CE that do not require analyte derivatization. LIF is highly sensitive but typically requires analyte derivatization. Electrochemistry provides an alternative method for direct analyte detection; however, in its most common form, direct current (DC) amperometry, it is limited to a small number of easily oxidizable or reducible analytes. Pulsed amperometric detection (PAD) is an alternative waveform that can increase the number of electrochemically detectable analytes. Increasing sensitivity for electrochemical detection (EC) and PAD requires the isolation of detection current (nA) from the separation current (muA) in a process generally referred to as current decoupling. Here, we present the development of a simple integrated decoupler to improve sensitivity and its coupling with PAD. A Pd microwire is used as the cathode for decoupling and a second Au or Pt wire is used as the working electrode for either EC or PAD. The electrode system is easy to make, requiring no clean-room facilities or specialized metallization systems. Sensitive detection of a wide range of analytes is shown to be possible using this system. Using this system we were able to achieve detection limits as low as 5 nM for dopamine, 74 nM for glutathione, and 100 nM for glucose.

Pulsed amperometric detection with poly(dimethylsiloxane)-fabricated capillary electrophoresis microchips for the determination of EPA priority pollutants

A miniaturized analytical system for separation and detection of three EPA priority phenolic pollutants, based on a poly(dimethylsiloxane)-fabricated capillary electrophoresis microchip and pulsed amperometric detection is described. The approach offers a rapid (less than 2 min), simultaneous measurement of three phenolic pollutants: phenol, 4,6-dinitro-o-cresol and pentachlorophenol. The highly stable response (RSD = 6.1%) observed for repetitive injections (n > 100) reflects the effectiveness of Au working electrode cleaned by pulsed amperometric detection. The effect of solution conditions, separation potential and detection waveform were optimized for both the separation and detection of phenols. Under the optimum conditions (5.0 mM phosphate buffer pH = 12.4, detection potential: 0.7 V, separation potential: 1200 V, injection time: 10 s) the baseline separation of the three selected compounds was achieved. Limits of detection of 2.2 microM (2.8 fmol), 0.9 microM (1.1 fmol), and 1.3 microM (1.6 fmol) were achieved for phenol, 4,6-dinitro-o-cresol and pentachlorophenol, respectively. A local city water sample and two over-the-counter sore-throat medicines were analyzed in order to demonstrate the capabilities of the proposed technique to face real applications.

On-line microdevice for stress proteomics

The handling of the cells or tissues is essential for proteomics research or drug screening, where labor is not avoidable. The steps of cell wash, protein extraction, protein denaturing are complicated procedures in conventional method using centrifugation and pipetting in the laboratory. This is the bottle-neck for proteome research. To solve these problems, we propose to utilize the nanotechnology, which will improve the proteomics methodology. Utilizing the nanotechnology, we developed a novel microseparation system, where centrifugation and pipetting are needless. This system has a nanostructured microdevice, by which the cell handling, protein extraction, and antibody assay can be performed. Since cell transfer is needless, all cells are corrected without any loss during the cell-pretreatment procedures, which allowed high reproducibility and enabled the detection of low amount of protein expression. Utilizing the microdevice, we analyzed the stress induced proteins. We further succeeded the screening of food that was useful for immunity and found that an extraction from seaweed promoted the apoptosis of T-lymphoblastic cells. Here, we present an on-line microdevice for stress proteomics.

Clinical analysis by microchip capillary electrophoresis

Clinical analysis often requires rapid, automated, and high-throughput analytical systems. Microchip capillary electrophoresis (CE) has the potential to achieve very rapid analysis (typically seconds), easy integration of multiple analytical steps, and parallel operation. Although it is currently still in an early stage of development, there are already many reports in the literature describing the applications of microchip CE in clinical analysis. At the same time, more fully automated and higher throughput commercial instruments for microchip CE are becoming available and are expected to further enhance the development of applications of microchip CE in routine clinical testing. To put into perspective its potential, we briefly compare microchip CE with conventional CE and review developments in this technique that may be useful in diagnosis of major diseases.

New antibody immobilization method via functional liposome layer for specific protein assays

A specific protein assay system based on functional liposome-modified gold electrodes has been demonstrated. To fabricate such assay system, a liposome layer was initially grown on top of a gold layer. The liposome layer contained two kinds of functional molecules: biotin molecules for the binding sites of streptavidin and N-(10,12-pentacosadiynoic)-acetylferrocene molecules for the facile redox probe in electrochemical detections. Then, streptavidin was attached on the functional liposme-modified layer using the interaction of streptavidin-sbiotin complex. On the streptavidin-attached surface, antibody molecules, anti-human serum albumin antibodies could be immobilized without any secondary antibodies. AFM imaging of the streptavidin-attached liposome surface revealed a uniform distribution of closely packed streptavidin molecules. In situ quartz-crystal microbalance and electrochemical measurements demonstrated that the wanted antibody-antigen reactions should occur with high specificity and selectivity. Our specific antibody assay system, based on a functional liposome modified electrode, can be developed further to yield sophisticated structures for numerous protein chips and immunoassay sensors.

Ferritin immunosensing on microfabricated electrodes based on the integration of immunoprecipitation and electrochemical signaling reactions

A signal registration strategy from micropatterned immunosensors that converts antigen-antibody binding reactions into electrochemical signals was demonstrated. An array-type micropatterned gold electrode on a silicon wafer was fabricated, containing two electrode geometries of rectangular (100 microm x 500 microm) and circular (r. 50 microm) types, exhibiting electrochemical characteristics of bulk and micro-electrodes, respectively. Ferritin was employed as a model analyte for immunosensing because it has an advantageous molecular structure for functionalization to the sensing interface, and is regarded as a general marker protein for tumors and cancer recurrence. With the fabricated and ferritin-functionalized immunosensors, biospecific interactions were performed with antiferritin antiserum and secondary antibody samples, followed by electrochemical signaling via an immunoprecipitation reaction by the label enzyme. Under the optimized affinity-surface construction steps and reaction conditions, both types of microfabricated electrodes exhibited well-defined calibration results as a function of the protein concentration in antiserum samples. Furthermore, circular-type micropatterned immunoelectrodes exhibited voltammetric characteristics of microelectrodes, which is advantageous in terms of sensor operation under a fixed potential and low signal drift during the signaling reaction compared with the bulk-type electrodes. The results support that the employed signaling method with the proposed immunosensor configuration is fit for sensor miniaturization and integration to future biomicrosystems.

Electrochemical probe for on-chip type flow immunoassay: Immunoglobulin G labeled with ferrocenecarboaldehyde

Labeling of ferrocenecarboaldehyde (Fc-CHO) to immunoglobulin G (IgG) via formation of Schiff-base and its reduction was investigated for construction of an electrochemical probe for miniaturized amperometric flow immunoassay. Approximately eight molecules of Fc-CHO were labeled to IgG and the reversible redox property of ferrocene was observed. Labeling efficiency improved by over three times as compared to the conventional method using ferrocenemonocarboxylic acid (Fc-COOH). Also, binding affinity of IgG labeled with Fc-CHO to its antigen, IgE, was investigated by enzyme-linked immunosorbent assay (ELISA) and surface plasmon resonance assay. IgG labeled with Fc-CHO that retained eight ferrocene moiety showed sufficient binding affinity to its antigen and the current response obtained in the flow electrochemical detection system increased by 14-fold as compared with IgG labeled with Fc-COOH when applying the potential of 390 mV vs. Ag/AgCl. The minimum detectable concentration of IgG labeled with Fc-CHO was 0.06 microM. IgG labeled with Fc-CHO demonstrate biochemical and electrochemical properties that are useful for electrochemical immunosensors.

Electrochemical techniques for lab-on-a-chip applications

During the last few years there has been a rapid increase in the use of electrochemical reactions in lab-on-a-chip devices. This development, which has so far mainly focussed on electrochemical detection in chip-based capillary electrophoresis, can be explained by the fact that electrochemical techniques and devices are particularly well-suited for inclusion in lab-on-a-chip systems. The most important reason for this is that the required electrodes can readily be manufactured and miniaturised without loss of analytical performance using conventional microfabrication methods. In this Research Highlight article, the developments during the last three years concerning electrochemical techniques for lab on-a-chip applications are discussed, with particular focus on emerging electrochemical methods for sample clean-up and preconcentration, electrochemical derivatisation and electrochemical detection in chip-based capillary electrophoresis.

Bioelectrocatalytic signaling from immunosensors with back-filling immobilization of glucose oxidase on biorecognition surfaces

We report a novel method of electrochemical signaling from antigen-antibody interactions at immunoelectrodes with bioelectrocatalyzed enzymatic signal amplification. For the immunosensing surface construction, a poly(amidoamine) G4-dendrimer was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization. As a model biorecognition reaction, the dinitrophenyl (DNP) antigen-functionalized electrode was fabricated and an anti-DNP antibody was used. Glucose oxidase (GOX) was chosen to amplify electrochemical signal by enzymatic catalysis. The signal amplification strategy introduced in this study is based on the back-filling immobilization of biocatalytic enzyme to the immunosensor surface, circumventing the use of an enzyme-labeled antibody. The non-labeled native antibody was biospecifically bound to the immobilized ligand, and the activated enzyme (periodate-treated GOX) reacted and "back-filled" the remaining surface amine groups on the dendrimer layer by an imine formation reaction. From the bioelectrocatalyzed signal registration with the immobilized GOX, the surface density of biospecifically bound antibody could be estimated. The DNP functionalization reaction was optimized to facilitate the antibody recognition and signaling reactions, and approximately 6% displacement of surface amine to DNP was found to be an optimum. From quartz crystal microbalance measurement, immunosensing reaction timing and the surface inertness to the nonspecific biomolecular binding were tested. By changing the surface functionalization level of DNP in the calibration experiments, immunosensors exhibited different dynamic detection ranges and limits of detection, supporting the capability of parameters modulation for the immunosensors. For the anti-DNP antibody assay, the fabricated immunosensor having 65% functionalization ratio exhibited the linear detection range of 10(-4) to 0.1 g/L protein and a limit of detection around 2 x 10(-5) g/L.

Why the move to microfluidics for protein analysis?

There has been a recent trend towards the miniaturization of analytical tools, but what are the advantages of microfluidic devices and when is their use appropriate? Recent advances in the field of micro-analytical systems can be classified according to instrument performance (which refers here to the desired property of the analytical tool of interest) and two important features specifically related to miniaturisation, namely reduction of the sample volume and the time-to-result. Here we discuss the contribution of these different parameters and aim to highlight the factors of choice in the development and use of microfluidic devices dedicated to protein analysis.

Capillary electrophoresis-based immunoassay

Capillary electrophoresis-based immunoassay (CEIA) is a developing analytical technique with a number of advantages over conventional immunoassay, such as reduced sample consumption, simpler procedure, easy simultaneous determination of multiple analytes, and short analysis time. However, there are still a number of technical issues that researchers on CEIA have to solve before the assay can be more widely used. These issues include method to improve the concentration sensitivity of the assay, requirement for robust separation strategy for different analytes, and method to increase the throughput of the assay. The approaches to solve these issues are reviewed. Several studies have been devoted to develop general separation strategies for CEIA, and to enhance the sensitivity of detection. The recent development of microchip-based CEIA is encouraging and is likely to address more drawbacks of CEIA, particularly on the throughput issue.