Characteristic Vertical Profiles of Cloud Water Composition in Marine Stratocumulus Clouds and Relationships With Precipitation

Contrasting wet deposition composition between three diverse islands and coastal North American sites

This study examined spatial variations of precipitation accumulation and chemistry for six sites located on the West and East Coasts of the U.S., and one site each on the islands of Hawaii, Bermuda, and Luzon of the Philippines (specifically Manila). The nine coastal sites ranged widely in both mean annual precipitation accumulation, ranging from 40 cm (Mauna Loa, Hawaii) to 275 cm (Washington), and in terms of monthly profiles. The three island sites represented the extremes of differences in terms of chemical profiles, with Bermuda having the highest overall ion concentrations driven mainly by sea salt, Hawaii having the highestSO 4 2 - mass fractions due to the nearby influence of volcanic SO2 emissions and mid-tropospheric transport of anthropogenic pollution, and Manila exhibiting the highest concentration of non-marine ions (NH 4 + non-sea salt [nss]SO 4 2 - , nss Ca2+,NO 3 - , nss K+, nss Na+, nss Mg2+) linked to anthropogenic, biomass burning, and crustal emissions. The Manila site exhibited the most variability in composition throughout the year due to shifting wind directions and having diverse regional and local pollutant sources. In contrast to the three island sites, the North American continental sites exhibited less variability in precipitation composition with sea salt being the most abundant constituent followed by some combination ofSO 4 2 - ,NO 3 - , andNH 4 + . The mean-annual pH values ranged from 4.88 (South Carolina) to 5.40 (central California) withNH 4 + exhibiting the highest neutralization factors for all sites except Bermuda where dust tracer species (nss Ca2+) exhibited enhanced values. The results of this study highlight the sensitivity of wet deposition chemistry to regional considerations, elevation, time of year, and atmospheric circulations.

Source Apportionment of Aerosol at a Coastal Site and Relationships with Precipitation Chemistry: A Case Study over the Southeast United States

This study focuses on the long-term aerosol and precipitation chemistry measurements from colocated monitoring sites in Southern Florida between 2013 and 2018. A positive matrix factorization (PMF) model identified six potential emission sources impacting the study area. The PMF model solution yielded the following source concentration profiles: (i) combustion; (ii) fresh sea salt; (iii) aged sea salt; (iv) secondary sulfate; (v) shipping emissions; and (vi) dust. Based on these results, concentration-weighted trajectory maps were developed to identify sources contributing to the PMF factors. Monthly mean precipitation pH values ranged from 4.98 to 5.58, being positively related to crustal species and negatively related to SO4 2-. Sea salt dominated wet deposition volume-weighted concentrations year-round without much variability in its mass fraction in contrast to stronger seasonal changes in PM2.5 composition where fresh sea salt was far less influential. The highest mean annual deposition fluxes were attributed to Cl-, NO3 -, SO4 2-, and Na+ between April and October. Nitrate is strongly correlated with dust constituents (unlike sea salt) in precipitation samples, indicative of efficient partitioning to dust. Interrelationships between precipitation chemistry and aerosol species based on long-term surface data provide insight into aerosol-cloud-precipitation interactions.

Characterization of Aerosol Hygroscopicity Over the Northeast Pacific Ocean: Impacts on Prediction of CCN and Stratocumulus Cloud Droplet Number Concentrations

During the Marine Aerosol Cloud and Wildfire Study (MACAWS) in June and July of 2018, aerosol composition and cloud condensation nuclei (CCN) properties were measured over the N.E. Pacific to characterize the influence of aerosol hygroscopicity on predictions of ambient CCN and stratocumulus cloud droplet number concentrations (CDNC). Three vertical regions were characterized, corresponding to the marine boundary layer (MBL), an above-cloud organic aerosol layer (AC-OAL), and the free troposphere (FT) above the AC-OAL. The aerosol hygroscopicity parameter (κ) was calculated from CCN measurements (κ CCN) and bulk aerosol mass spectrometer (AMS) measurements (κ AMS). Within the MBL, measured hygroscopicities varied between values typical of both continental environments (~0.2) and remote marine locations (~0.7). For most flights, CCN closure was achieved within 20% in the MBL. For five of the seven flights, assuming a constant aerosol size distribution produced similar or better CCN closure than assuming a constant "marine" hygroscopicity (κ = 0.72). An aerosol-cloud parcel model was used to characterize the sensitivity of predicted stratocumulus CDNC to aerosol hygroscopicity, size distribution properties, and updraft velocity. Average CDNC sensitivity to accumulation mode aerosol hygroscopicity is 39% as large as the sensitivity to the geometric median diameter in this environment. Simulations suggest CDNC sensitivity to hygroscopicity is largest in marine stratocumulus with low updraft velocities (<0.2 m s-1), where accumulation mode particles are most relevant to CDNC, and in marine stratocumulus or cumulus with large updraft velocities (>0.6 m s-1), where hygroscopic properties of the Aitken mode dominate hygroscopicity sensitivity.

On the relationship between cloud water composition and cloud droplet number concentration

Aerosol-cloud interactions are the largest source of uncertainty in quantifying anthropogenic radiative forcing. The large uncertainty is, in part, due to the difficulty of predicting cloud microphysical parameters, such as the cloud droplet number concentration (N d). Even though rigorous first-principle approaches exist to calculate N d, the cloud and aerosol research community also relies on empirical approaches such as relating N d to aerosol mass concentration. Here we analyze relationships between N d and cloud water chemical composition, in addition to the effect of environmental factors on the degree of the relationships. Warm, marine, stratocumulus clouds off the California coast were sampled throughout four summer campaigns between 2011 and 2016. A total of 385 cloud water samples were collected and analyzed for 80 chemical species. Single- and multispecies log-log linear regressions were performed to predict N d using chemical composition. Single-species regressions reveal that the species that best predicts N d is total sulfate (R adj 2 = 0.40 ). Multispecies regressions reveal that adding more species does not necessarily produce a better model, as six or more species yield regressions that are statistically insignificant. A commonality among the multispecies regressions that produce the highest correlation with N d was that most included sulfate (either total or non-sea-salt), an ocean emissions tracer (such as sodium), and an organic tracer (such as oxalate). Binning the data according to turbulence, smoke influence, and in-cloud height allowed for examination of the effect of these environmental factors on the composition-N d correlation. Accounting for turbulence, quantified as the standard deviation of vertical wind speed, showed that the correlation between N d with both total sulfate and sodium increased at higher turbulence conditions, consistent with turbulence promoting the mixing between ocean surface and cloud base. Considering the influence of smoke significantly improved the correlation with N d for two biomass burning tracer species in the study region, specifically oxalate and iron. When binning by in-cloud height, non-sea-salt sulfate and sodium correlated best with N d at cloud top, whereas iron and oxalate correlated best with N d at cloud base.

Relationships Between Supermicrometer Sea Salt Aerosol and Marine Boundary Layer Conditions: Insights From Repeated Identical Flight Patterns

The MONterey Aerosol Research Campaign (MONARC) in May-June 2019 featured 14 repeated identical flights off the California coast over the open ocean at the same time each flight day. The objective of this study is to use MONARC data along with machine learning analysis to evaluate relationships between both supermicrometer sea salt aerosol number (N>1) and volume (V>1) concentrations and wind speed, wind direction, sea surface temperature (SST), ambient temperature (Tamb), turbulent kinetic energy (TKE), relative humidity (RH), marine boundary layer (MBL) depth, and drizzle rate. Selected findings from this study include the following: (i) Near surface (<60 m) N>1 and V>1 concentration ranges were 0.1-4.6 cm-3 and 0.3-28.2 μm3 cm-3, respectively; (ii) four meteorological regimes were identified during MONARC with each resulting in different N>1 and V>1 concentrations and also varying horizontal and vertical profiles; (iii) the relative predictive strength of the MBL properties varies depending on predicting N>1 or V>1, with MBL depth being more highly ranked for predicting N>1 and with TKE being higher for predicting V>1; (iv) MBL depths >400 m (<200 m) often correspond to lower (higher) N>1 and V>1 concentrations; (v) enhanced drizzle rates coincide with reduced N>1 and V>1 concentrations; (vi) N>1 and V>1 concentrations exhibit an overall negative relationship with SST and RH and an overall positive relationship with Tamb; and (vii) wind speed and direction were relatively weak predictors of N>1 and V>1.

An annual time series of weekly size-resolved aerosol properties in the megacity of Metro Manila, Philippines

Size-resolved aerosol samples were collected in Metro Manila between July 2018 and October 2019. Two Micro-Orifice Uniform Deposit Impactors (MOUDI) were deployed at Manila Observatory in Quezon City, Metro Manila with samples collected on a weekly basis for water-soluble speciation and mass quantification. Additional sets were collected for gravimetric and black carbon analysis, including during special events such as holidays. The unique aspect of the presented data is a year-long record with weekly frequency of size-resolved aerosol composition in a highly populated megacity where there is a lack of measurements. The data are suitable for research to understand the sources, evolution, and fate of atmospheric aerosols, as well as studies focusing on phenomena such as aerosol-cloud-precipitation-meteorology interactions, regional climate, boundary layer processes, and health effects. The dataset can be used to initialize, validate, and/or improve models and remote sensing algorithms.

Stratocumulus cloud clearings: statistics from satellites, reanalysis models, and airborne measurements

This study provides a detailed characterization of stratocumulus clearings off the US West Coast using remote sensing, reanalysis, and airborne in situ data. Ten years (2009-2018) of Geostationary Operational Environmental Satellite (GOES) imagery data are used to quantify the monthly frequency, growth rate of total area (GRArea), and dimensional characteristics of 306 total clearings. While there is interannual variability, the summer (winter) months experienced the most (least) clearing events, with the lowest cloud fractions being in close proximity to coastal topographical features along the central to northern coast of California, including especially just south of Cape Mendocino and Cape Blanco. From 09:00 to 18:00 (PST), the median length, width, and area of clearings increased from 680 to 1231, 193 to 443, and ~ 67000 to ~ 250000km2, respectively. Machine learning was applied to identify the most influential factors governing the GRArea of clearings between 09:00 and 12:00PST, which is the time frame of most rapid clearing expansion. The results from gradient-boosted regression tree (GBRT) modeling revealed that air temperature at 850 hPa (T 850), specific humidity at 950 hPa (q 950), sea surface temperature (SST), and anomaly in mean sea level pressure (MSLPanom) were probably most impactful in enhancing GRArea using two scoring schemes. Clearings have distinguishing features such as an enhanced Pacific high shifted more towards northern California, offshore air that is warm and dry, stronger coastal surface winds, enhanced lower-tropospheric static stability, and increased subsidence. Although clearings are associated obviously with reduced cloud fraction where they reside, the domain-averaged cloud albedo was actually slightly higher on clearing days as compared to non-clearing days. To validate speculated processes linking environmental parameters to clearing growth rates based on satellite and reanalysis data, airborne data from three case flights were examined. Measurements were compared on both sides of the clear-cloudy border of clearings at multiple altitudes in the boundary layer and free troposphere, with results helping to support links suggested by this study's model simulations. More specifically, airborne data revealed the influence of the coastal low-level jet and extensive horizontal shear at cloud-relevant altitudes that promoted mixing between clear and cloudy air. Vertical profile data provide support for warm and dry air in the free troposphere, additionally promoting expansion of clearings. Airborne data revealed greater evidence of sea salt in clouds on clearing days, pointing to a possible role for, or simply the presence of, this aerosol type in clearing areas coincident with stronger coastal winds.

Evidence of Natural and Anthropogenic Impacts on Rainwater Trace Metal Geochemistry in Central Mexico: A Statistical Approach

Trace metals Fe, Mn, Cr, Cu, Ni, Co, Pb, Zn, Cd, and As were determined on a monthly basis in a total of 52 rain samples collected from six different locations in the central region of Mexico during March 2016–April 2017. The average concentrations of trace metals (mg/L) in the rainwater samples showed an order of Zn (0.873) > Fe (0.395) > Mn (0.083) > Cr (0.041) ≥ Cu (0.041) > Pb (0.031) > Ni (0.020) > Co (0.013) > As (0.0003) > Cd (0.002). The differences observed in metal concentrations are related to variations in the influence of continental air masses, local transport, regional advection, and the solubility of trace metals. High concentrations of metals were observed in the months of March to May at all sites, probably due to the less extensive removal of air/air pollutants. The values obtained from the enrichment factor (EF) per metal showed relatively high values for Cd, Zn, Cu, Pb, Co, Ni, and Cr, suggesting anthropogenic origin. Pearson’s correlation matrix validated the distribution of trace metal sources and their relationships with local/regional meteorological characteristics. This paper presents relevant basic information for the evaluation of the toxic potential of rainwater and the possible health risks when using this source of water for human consumption.

Effects of Biomass Burning on Stratocumulus Droplet Characteristics, Drizzle Rate, and Composition

This study reports on airborne measurements of stratocumulus cloud properties under varying degrees of influence from biomass burning (BB) plumes off the California coast. Data are reported from five total airborne campaigns based in Marina, California, with two of them including influence from wildfires in different areas along the coast of the western United States. The results indicate that subcloud cloud condensation nuclei number concentration and mass concentrations of important aerosol species (organics, sulfate, nitrate) were better correlated with cloud droplet number concentration (N d) as compared to respective above-cloud aerosol data. Given that the majority of BB particles resided above cloud tops, this is an important consideration for future work in the region as the data indicate that the subcloud BB particles likely were entrained from the free troposphere. Lower cloud condensation nuclei activation fractions were observed for BB-impacted clouds as compared to non-BB clouds due, at least partly, to less hygroscopic aerosols. Relationships between N d and either droplet effective radius or drizzle rate are preserved regardless of BB influence, indicative of how parameterizations can exhibit consistent skill for varying degrees of BB influence as long as N d is known. Lastly, the composition of both droplet residual particles and cloud water changed significantly when clouds were impacted by BB plumes, with differences observed for different fire sources stemming largely from effects of plume aging time and dust influence.

AEROSOL-CLOUD-METEOROLOGY INTERACTION AIRBORNE FIELD INVESTIGATIONS: Using Lessons Learned from the U.S. West Coast in the Design of ACTIVATE off the U.S. East Coast

We report on a multiyear set of airborne field campaigns (2005–16) off the California coast to examine aerosols, clouds, and meteorology, and how lessons learned tie into the upcoming NASA Earth Venture Suborbital (EVS-3) campaign: Aerosol Cloud meTeorology Interactions oVer the western ATlantic Experiment (ACTIVATE; 2019–23). The largest uncertainty in estimating global anthropogenic radiative forcing is associated with the interactions of aerosol particles with clouds, which stems from the variability of cloud systems and the multiple feedbacks that affect and hamper efforts to ascribe changes in cloud properties to aerosol perturbations. While past campaigns have been limited in flight hours and the ability to fly in and around clouds, efforts sponsored by the Office of Naval Research have resulted in 113 single aircraft flights (>500 flight hours) in a fixed region with warm marine boundary layer clouds. All flights used nearly the same payload of instruments on a Twin Otter to fly below, in, and above clouds, producing an unprecedented dataset. We provide here i) an overview of statistics of aerosol, cloud, and meteorological conditions encountered in those campaigns and ii) quantification of model-relevant metrics associated with aerosol–cloud interactions leveraging the high data volume and statistics. Based on lessons learned from those flights, we describe the pragmatic innovation in sampling strategy (dual-aircraft approach with combined in situ and remote sensing) that will be used in ACTIVATE to generate a dataset that can advance scientific understanding and improve physical parameterizations for Earth system and weather forecasting models, and for assessing next-generation remote sensing retrieval algorithms.

Influence of natural and urban emissions on rainwater chemistry at a southwestern Iran coastal site

The influence of pollutant sources on rainwater chemistry is investigated at an industrial coastal site in Iran (Mahshahr) where frequent dust storms occur throughout the year. For this purpose, rainwater samples from two main pluvial systems were collected and analyzed for major ions and selected heavy metals (Al, Cu, Ni, Pb and Zn). The differences in calculated and measured pH values of rainwater pointed to the important effect of neutralizing agents, specifically Ca²⁺, Na⁺ and Mg²⁺, in offsetting the high acidity generated by NO₃^- and SO₄^2- to yield alkaline rainwater. A comparison of species concentration ratios relative to those for pure seawater and Earth's crust revealed that nearly all NO₃^- and most Ca²⁺, SO₄^2- and Mg²⁺ originated from non-marine and local sources. Compared with other areas around the world, some heavy metals (particularly Zn) displayed higher concentrations in Mahshahr rainwater. Enrichment factor (EF) analysis revealed that Cu and Ni were moderately enriched, while Pb and Zn in particular (EF > 100) were highly enriched indicating that these species in rainwater stemmed from anthropogenic activities. Positive matrix factorization (PMF) modeling indicated that the four main pollutant sources impacting the regional rainwater were soil, combustion processes, marine emissions, and the local industrial sources.

Sources of pollution and interrelationships between aerosol and precipitation chemistry at a central California site

This study examines co-located aerosol and precipitation chemistry data between 2010 and 2016 at Pinnacles National Monument ~65 km east of the coastline in central California. Positive matrix factorization analysis of the aerosol composition data revealed seven distinct pollutant sources: aged sea salt (25.7% of PM2.5), biomass burning (24.2% of PM2.5), fresh sea salt (15.0% of PM2.5), secondary sulfate (11.7% of PM2.5), dust (10.0% of PM2.5), vehicle emissions (8.2% of PM2.5), and secondary nitrate (5.2% of PM2.5). The influence of meteorology and transport on monthly patterns of PM2.5 composition is discussed. Only secondary sulfate exhibited a statistically significant change (a reduction) over time among the PM2.5 source factors. In contrast, PMcoarse exhibited a significant increase most likely due to dust influence. Monthly profiles of precipitation chemistry are summarized showing that the most abundant species in each month was either SO42-, NO3-, or Cl-. Intercomparisons between the precipitation and aerosol data revealed several features: (i) precipitation pH was inversely related to factors associated with more acidic aerosol constituents such as secondary sulfate and aged sea salt, in addition to being reduced by uptake of HNO3 in the liquid phase; (ii) two aerosol source factors (dust and aged sea salt) and PMcoarse exhibited a positive association with Ca2+ in precipitation, suggestive of directly emitted aerosol types with larger sizes promoting precipitation; and (iii) sulfate levels in both the aerosol and precipitation samples analyzed were significantly correlated with dust and aged sea salt PMF factors, pointing to the partitioning of secondary sulfate to dust and sea salt particles. The results of this work have implications for the region's air quality and hydrological cycle, in addition to demonstrating that the use of co-located aerosol and precipitation chemistry data can provide insights relevant to aerosol-precipitation interactions.

Development and characterization of a high-efficiency, aircraft-based axial cyclone cloud water collector

A new aircraft-mounted probe for collecting samples of cloud water has been designed, fabricated, and extensively tested. Following previous designs, the probe uses inertial separation to remove cloud droplets from the airstream, which are subsequently collected and stored for offline analysis. We report details of the design, operation, and modelled and measured probe performance. Computational fluid dynamics (CFD) was used to understand the flow patterns around the complex interior geometrical features that were optimized to ensure efficient droplet capture. CFD simulations coupled with particle tracking and multiphase surface transport modelling provide detailed estimates of the probe performance across the entire range of flight operating conditions and sampling scenarios. Physical operation of the probe was tested on a Lockheed C-130 Hercules (fuselage mounted) and de Havilland Twin Otter (wing pylon mounted) during three airborne field campaigns. During C-130 flights on the final field campaign, the probe reflected the most developed version of the design and a median cloud water collection rate of 4.5 mL min^-1 was achieved. This allowed samples to be collected over 1-2 min under optimal cloud conditions. Flights on the Twin Otter featured an inter-comparison of the new probe with a slotted-rod collector, which has an extensive airborne campaign legacy. Comparison of trace species concentrations showed good agreement between collection techniques, with absolute concentrations of most major ions agreeing within 30 %, over a range of several orders of magnitude.