Injectable Peptide Decorated Functional Nanofibrous Hollow Microspheres to Direct Stem Cell Differentiation and Tissue Regeneration

Research Progress on Injectable Microspheres as New Strategies for the Treatment of Osteoarthritis Through Promotion of Cartilage Repair

Osteoarthritis (OA) is a degenerative disease caused by a variety of factors with joint pain as the main symptom, including fibrosis, chapping, ulcers, and loss of cartilage. Traditional treatment can only delay the progression of OA, and classical delivery system have many side effects. In recent years, microspheres have shown great application prospects in the field of OA treatment. Microspheres can support cells, reproduce the natural tissue microenvironment in vitro and in vivo, and are an efficient delivery system for the release of drugs or biological agents, which can promote cell proliferation, migration, and differentiation. Thus, they have been widely used in cartilage repair and regeneration. In this review, preparation processes, basic materials, and functional characteristics of various microspheres commonly used in OA treatment are systematically reviewed. Then it is introduced surface modification strategies that can improve the biological properties of microspheres and discussed a series of applications of microsphere functionalized scaffolds in OA treatment. Finally, based on bibliometrics research, the research development, future potential, and possible research hotspots of microspheres in the field of OA therapy is systematically and dynamically evaluated. The comprehensive and systematic review will bring new understanding to the field of microsphere treatment of OA.

Peptide-Based Biomaterials for Bone and Cartilage Regeneration

The healing of osteochondral defects (OCDs) that result from injury, osteochondritis, or osteoarthritis and bear lesions in the cartilage and bone, pain, and loss of joint function in middle- and old-age individuals presents challenges to clinical practitioners because of non-regenerative cartilage and the limitations of current therapies. Bioactive peptide-based osteochondral (OC) tissue regeneration is becoming more popular because it does not have the immunogenicity, misfolding, or denaturation problems associated with original proteins. Periodically, reviews are published on the regeneration of bone and cartilage separately; however, none of them addressed the simultaneous healing of these tissues in the complicated heterogeneous environment of the osteochondral (OC) interface. As regulators of cell adhesion, proliferation, differentiation, angiogenesis, immunomodulation, and antibacterial activity, potential therapeutic strategies for OCDs utilizing bone and cartilage-specific peptides should be examined and investigated. The main goal of this review was to study how they contribute to the healing of OCDs, either alone or in conjunction with other peptides and biomaterials.

3D Printing of Bioactive Gel-like Double Emulsion into a Biocompatible Hierarchical Macroporous Self-Lubricating Scaffold for 3D Cell Culture

The interconnected hierarchically porous structures are of key importance for potential applications as substrates for drug delivery, cell culture, and bioscaffolds, ensuring cell adhesion and sufficient diffusion of metabolites and nutrients. Here, encapsulation of a vitamin C-loaded gel-like double emulsion using a hydrophobic emulsifier and soy particles was performed to develop a bioactive bioink for 3D printing of highly porous scaffolds with enhanced cell biocompatibility. The produced double emulsions suggested a mechanical strength with the range of elastic moduli of soft tissues possessing a thixotropic feature and recoverable matrix. The outstanding flow behavior and viscoelasticity broaden the potential of gel-like double emulsion to engineer 3D scaffolds, in which 3D constructs showed a high level of porosity and excellent shape fidelity with antiwearing and self-lubricating properties. Investigation of cell viability and proliferation using fibroblasts (NIH-3T3) within vitamin C-loaded gel-like bioinks revealed that printed 3D scaffolds offered brilliant biocompatibility and cell adhesion. Compared to scaffolds without encapsulated vitamin C, 3D scaffolds containing vitamin C showed higher cell viability after 1 week of cell proliferation. This work represented a systematic investigation of hierarchical self-assembly in double emulsions and offered insights into mechanisms that control microstructure within supramolecular structures, which could be instructive for the design of advanced functional tissues.

Cytomodulin-10 modified GelMA hydrogel with kartogenin for in-situ osteochondral regeneration

The incidence of osteochondral defect is increasing year by year, but there is still no widely accepted method for repairing the defect. Hydrogels loaded with bioactive molecules have provided promising alternatives for in-situ osteochondral regeneration. Kartogenin (KGN) is an effective and steady small molecule with the function of cartilage regeneration and protection which can be further boosted by TGF-β. However, the high cost, instability, and immunogenicity of TGF-β would limit its combined effect with KGN in clinical application. In this study, a composite hydrogel CM-KGN@GelMA, which contained TGF-β1 analog short peptide cytomodulin-10 (CM-10) and KGN, was fabricated. The results indicated that CM-10 modified on GelMA hydrogels exerted an equivalent role in enhancing chondrogenesis as TGF-β1, and this effect was also boosted when combined with KGN. Moreover, it was revealed that CM-10 and KGN had a synergistic effect on promoting the chondrogenesis of BMSCs by up-regulating the expression of RUNX1 and SOX9 at both mRNA and protein levels in vitro. Finally, the composite hydrogel exhibited a satisfactory osteochondral defect repair effect in vivo, showing similar structures close to the native tissue. Taken together, this study has revealed that CM-10 may serve as an alternative for TGF-β1 and can collaborate with KGN to accelerate chondrogenesis, which suggests that the fabricated CM-KGN@GelMA composite hydrogel can be acted as a potential scaffold for osteochondral defect regeneration. STATEMENT OF SIGNIFICANCE: Kartogenin and TGF-β have shown great value in promoting osteochondral defect regeneration, and their combined application can enhance the effect and show great potential for clinical application. Herein, a functional CM-KGN@GelMA hydrogel was fabricated, which was composed of TGF-β1 mimicking peptide CM-10 and KGN. CM-10 in hydrogel retained an activity like TGF-β1 to facilitate BMSC chondrogenesis and exhibited boosting chondrogenesis by up-regulating RUNX1 and SOX9 when being co-applied with KGN. In vivo, the hydrogel promoted cartilage regeneration and subchondral bone reconstruction, showing similar structures as the native tissue, which might be vital in recovering the bio-function of cartilage. Thus, this study developed an effective scaffold and provided a promising way for osteochondral defect repair.

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

Comparison of multiple synthetic chondroinductive factors in pellet culture against a TGF-β positive control

Despite the advances in surgical and cell therapy regenerative techniques for cartilage repair, the challenge is to overcome an inferior fibrocartilage repair tissue. In vitro, TGF-β1 and TGF-β3 are the primary growth factors employed to induce chondrogenic differentiation. However, the clinical application of native proteins may present challenges regarding stability, cost, or reproducibility. Therefore, there remains an unmet clinical need for the identification of small chondroinductive synthetic molecules. From the literature, two peptides-CM10 and CK2.1-appear to be promising candidates; however, they have not been directly compared to TGF-β with human bone marrow-derived stem cells (hBMSCs). Similarly, two promising compounds-kartogenin and SM04690-have been reported in the literature to exhibit chondroinductive potential in vivo and in vitro; however, kartogenin was not directly compared against TGF-β. In the current study, we evaluated the chondroinductive potential of CM10, CK2.1, kartogenin, and SM04690, and directly compared them to each other and to a TGF-β3 positive control. Following 21 days of culture, none of the evaluated chondrogenic factors, either individually or even in combinations of two, resulted in a higher gene expression of chondrogenic markers as compared to TGF-β3. Additionally, no collagen II gene expression was detected except in the TGF-β3 positive control group. Given that the evaluated factors have confirmed efficacy in the literature, but not in the current study with a positive control, there may be value in the future identification of new chondroinductive factors that are less situation-dependent, with rigorous evaluations of their effect on chondrogenesis using positive controls.

Synthetic peptides activating discoidin domain receptor 2 and collagen-binding integrins cooperate to stimulate osteoblast differentiation of skeletal progenitor cells

Skeletal progenitor: collagen interactions are critical for bone development and regeneration. Both collagen-binding integrins and discoidin domain receptors (DDR1 and DDR2) function as collagen receptors in bone. Each receptor is activated by a distinct collagen sequence; GFOGER for integrins and GVMGFO for DDRs. Specific triple helical peptides containing each of these binding domains were evaluated for ability to stimulate DDR2 and integrin signaling and osteoblast differentiation. GVMGFO peptide stimulated DDR2 Y740 phosphorylation and osteoblast differentiation as measured by induction of osteoblast marker mRNAs and mineralization without affecting integrin activity. In contrast, GFOGER peptide stimulated focal adhesion kinase (FAK) Y397 phosphorylation, an early measure of integrin activation, and to a lesser extent osteoblast differentiation without affecting DDR2-P. Significantly, the combination of both peptides cooperatively enhanced both DDR2 and FAK signaling and osteoblast differentiation, a response that was blocked in Ddr2-deficient cells. These studies suggest that the development of scaffolds containing DDR and integrin-activating peptides may provide a new route for promoting bone regeneration. STATEMENT OF SIGNIFICANCE: A method for stimulating osteoblast differentiation of skeletal progenitor cells is described that uses culture surfaces coated with a collagen-derived triple-helical peptide to selectively activate discoidin domain receptors. When this peptide is combined with an integrin-activating peptide, synergistic stimulation of differentiation is seen. This approach of combining collagen-derived peptides to stimulate the two main collagen receptors in bone (DDR2 and collagen-binding integrins) provides a route for developing a new class of tissue engineering scaffolds for bone regeneration.

Particle carriers for controlled release of peptides

There has been growing discovery and use of therapeutic peptides in drug delivery and tissue engineering. Peptides are smaller than proteins and can be formulated into drug delivery systems without significant loss of their bioactivity, which remains a concern with proteins. However, the smaller size of peptides has made the controlled release of these bioactive molecules from carriers challenging. Thus, there has been increasing development of carriers to improve the controlled release of peptides by leveraging hydrophobic and electrostatic interactions between the peptide and the carrier. The focus of this review paper is to critically discuss synthetic and natural nanoparticles and microparticles that have been investigated for the controlled delivery of peptides with emphasis on the underlying interactions.

Recent progress in polymeric gene vectors: Delivery mechanisms, molecular designs, and applications

Gene therapy and gene delivery have drawn extensive attention in recent years especially when the COVID-19 mRNA vaccines were developed to prevent severe symptoms caused by the corona virus. Delivering genes, such as DNA and RNA into cells, is the crucial step for successful gene therapy and remains a bottleneck. To address this issue, vehicles (vectors) that can load and deliver genes into cells are developed, including viral and non-viral vectors. Although viral gene vectors have considerable transfection efficiency and lipid-based gene vectors become popular since the application of COVID-19 vaccines, their potential issues including immunologic and biological safety concerns limited their applications. Alternatively, polymeric gene vectors are safer, cheaper, and more versatile compared to viral and lipid-based vectors. In recent years, various polymeric gene vectors with well-designed molecules were developed, achieving either high transfection efficiency or showing advantages in certain applications. In this review, we summarize the recent progress in polymeric gene vectors including the transfection mechanisms, molecular designs, and biomedical applications. Commercially available polymeric gene vectors/reagents are also introduced. Researchers in this field have never stopped seeking safe and efficient polymeric gene vectors via rational molecular designs and biomedical evaluations. The achievements in recent years have significantly accelerated the progress of polymeric gene vectors toward clinical applications.

Development of magnetic poly(L-lactic Acid) nanofibrous microspheres for transporting and delivering targeted cells

To avoid infection and other risks caused by large open-surgery incisions using scaffold transplants, it is very important to study injectable microcarrier-loaded cells for targeted therapy and tissue regeneration. In this study, on the one hand, to simulate the hierarchical structure of the extracellular matrix and carry cells, poly(L-lactic acid) (PLLA) nanofibrous microspheres (large microspheres) were initially fabricated as cell carriers. On the other hand, to precisely deliver cells through a magnetic field and promote stem cell differentiation, drug-loaded mesoporous Fe₃O₄@SiO₂ microspheres (small microspheres) were prepared and coated on the surface PLLA nanofibrous microspheres. The coating conditions were systematically studied and optimized. The results showed that planetary-satellite-like cell carriers were successfully prepared and the carriers were capable of freely translocating under the influence of a magnetic field. It has been demonstrated in vitro experiments that the carriers are biocompatible and are capable of acting as drug carriers. Specifically, they were able to load and release cells in response to magnetic fields. In vivo experiments indicated that the carriers could successfully load and release GFP-labelled cells in nude mice. The study presented in this paper provides a versatile and promising platform for the cell-based therapy in tissue engineering and regenerative medicine.

Cell-binding peptides on the material surface guide stem cell fate of adhesion, proliferation and differentiation

Human cells, especially stem cells, need to communicate and interact with extracellular matrix (ECM) proteins, which not only serve as structural components but also guide and support cell fate and properties such as cell adhesion, proliferation, survival and differentiation. The binding of the cells with ECM proteins or ECM-derived peptides via cell adhesion receptors such as integrins activates several signaling pathways that determine the cell fate, morphological change, proliferation and differentiation. The development of synthetic ECM protein-derived peptides that mimic the biological and biochemical functions of natural ECM proteins will benefit academic and clinical application. Peptides derived from or inspired by specific ECM proteins can act as agonists of each ECM protein receptor. Given that most ECM proteins function in cell adhesion via integrin receptors, many peptides have been developed that bind to specific integrin receptors. In this review, we discuss the peptide sequence, immobilization design, reaction method, and functions of several ECM protein-derived peptides. Various peptide sequences derived from mainly ECM proteins, which are used for coating or grafting on dishes, scaffolds, hydrogels, implants or nanofibers, have been developed to improve the adhesion, proliferation or differentiation of stem cells and to culture differentiated cells. This review article will help to inform the optimal choice of ECM protein-derived peptides for the development of scaffolds, implants, hydrogels, nanofibers and 2D cell culture dishes to regulate the proliferation and direct the differentiation of stem cells into specific lineages.

Research progress of functional motifs based on growth factors in cartilage tissue engineering: A review

Osteoarthritis is a chronic degenerative joint disease that exerts significant impacts on personal life quality, and cartilage tissue engineering is a practical treatment in clinical. Various growth factors are involved in cartilage regeneration and play important roles therein, which is the focus of current cartilage repair strategy. To compensate for the purification difficulty, high cost, poor metabolic stability, and circulating dilution of natural growth factors, the concept of functional motifs (also known as mimetic peptides) from original growth factor was introduced in recent studies. Here, we reviewed the selection mechanisms, biological functions, carrier scaffolds, and modification methods of growth factor-related functional motifs, and evaluated the repair performance in cartilage tissue engineering. Finally, the prospects of functional motifs in researches and clinical application were discussed.

Recombinant protein drugs-based intra articular drug delivery systems for osteoarthritis therapy

Osteoarthritis (OA) is the most prevalent chronic degenerative joint disease. It weakens the motor function of patients and imposes a significant economic burden on society. The current medications commonly used in clinical practice do not meet the need for the treatment of OA. Recombinant protein drugs (RPDs) can treat OA by inhibiting inflammatory pathways, regulating catabolism/anabolism, and promoting cartilage repair, thereby showing promise as disease-modifying OA drugs (DMOADs). However, the rapid clearance and short half-life of them in the articular cavity limit their clinical translation. Therefore, the reliable drug delivery systems for extending drug treatment are necessary for the further development. This review introduces RPDs with therapeutic potential for OA, and summarizes their research progress on related drug delivery systems, and make proper discussion on the certain keys for optimal development of this area.

Microcarriers in application for cartilage tissue engineering: Recent progress and challenges

Successful regeneration of cartilage tissue at a clinical scale has been a tremendous challenge in the past decades. Microcarriers (MCs), usually used for cell and drug delivery, have been studied broadly across a wide range of medical fields, especially the cartilage tissue engineering (TE). Notably, microcarrier systems provide an attractive method for regulating cell phenotype and microtissue maturations, they also serve as powerful injectable carriers and are combined with new technologies for cartilage regeneration. In this review, we introduced the typical methods to fabricate various types of microcarriers and discussed the appropriate materials for microcarriers. Furthermore, we highlighted recent progress of applications and general design principle for microcarriers. Finally, we summarized the current challenges and promising prospects of microcarrier-based systems for medical applications. Overall, this review provides comprehensive and systematic guidelines for the rational design and applications of microcarriers in cartilage TE.

Articular Cartilage Regeneration through Bioassembling Spherical Micro-Cartilage Building Blocks

Articular cartilage lesions are prevalent and affect one out of seven American adults and many young patients. Cartilage is not capable of regeneration on its own. Existing therapeutic approaches for articular cartilage lesions have limitations. Cartilage tissue engineering is a promising approach for regenerating articular neocartilage. Bioassembly is an emerging technology that uses microtissues or micro-precursor tissues as building blocks to construct a macro-tissue. We summarize and highlight the application of bioassembly technology in regenerating articular cartilage. We discuss the advantages of bioassembly and present two types of building blocks: multiple cellular scaffold-free spheroids and cell-laden polymer or hydrogel microspheres. We present techniques for generating building blocks and bioassembly methods, including bioprinting and non-bioprinting techniques. Using a data set of 5069 articles from the last 28 years of literature, we analyzed seven categories of related research, and the year trends are presented. The limitations and future directions of this technology are also discussed.

Biostimulatory Micro-Fragmented Nanofiber-Hydrogel Composite Improves Mesenchymal Stem Cell Delivery and Soft Tissue Remodeling

Functional microgels are preferred stem cell carriers due to the ease of delivery through minimally invasive injection and seamless integration with the surrounding host tissue. A biostimulatory nanofiber-hydrogel composite (NHC) has been previously developed through covalently crosslinking a hyaluronic acid hydrogel network with surface-functionalized poly (ε-caprolactone) nanofiber fragments. The NHC mimics the microarchitecture of native soft tissue matrix, showing enhanced cell infiltration, immunomodulation, and proangiogenic properties. Here, injectability of the pre-formed NHC is improved by mechanical fragmentation, making it into micro-fragmented NHC (mfNHC) in a granular gel form as a stem cell carrier to deliver mesenchymal stem cells (MSCs) for soft tissue remodeling. The mfNHC shows a similar storage modulus but a significantly reduced injection force, as compared with the corresponding bulk NHC. When injected subcutaneously in a rat model, mfNHC-MSC constructs initiate an elevated level of host macrophage infiltration, more pro-regenerative polarization, and subsequently, improved angiogenesis and adipogenesis response when compared to mfNHC alone. A similar trend of host cell infiltration and pro-angiogenic response is detected in a swine model with a larger volume injection. These results suggest a strong potential for use of the mfNHC as an injectable carrier for cell delivery and soft tissue remodeling.

Electrosprayed Regeneration-Enhancer-Element Microspheres Power Osteogenesis and Angiogenesis Coupling

Electrosprayed microspheres for bone regeneration are conventionally restricted by the lack of osteogenic modulation for both encapsulated stem cells and surrounding cells at the defect site. Here, sodium alginate microspheres encapsulating L-arginine doped hydroxyapatite nanoparticles (Arg/HA NPs) and bone mesenchymal stem cells (BMSCs) as regeneration-enhancer-element reservoirs (Arg/HA-SA@BMSC) for bone healing are electrosprayed. The Arg/HA NPs serve as a container of L-arginine and Ca²⁺ and the BMSCs inside the microspheres metabolize the released L-arginine into bioactive gas nitric oxide (NO) in the presence of Ca²⁺ to activate the nitric oxide (NO)/cyclic guanosine monophosphate (cGMP) signaling pathway. Meanwhile, the generated NO diffuses out of the microspheres together with the Ca²⁺ and L-arginine as exterior enhancers to promote the osteogenesis-angiogenesis coupling of surrounding BMSCs and endothelial cells (ECs) at the bone defect site, generating an internal/external modulation loop between the encapsulated cells and surrounding native cells. It is demonstrated that such regeneration-enhancer-element reservoirs could effectively increase the bone tissue formation and neovasculature using rat calvarial defect models. It is envisioned that the microsphere system could streamline vascularized bone regeneration therapy as a high throughput, minimally invasive yet highly effective strategy to accelerate bone healing.

Functional microspheres for tissue regeneration

As a new type of injectable biomaterials, functional microspheres have attracted increasing attention in tissue regeneration because they possess some advantageous properties compared to other biomaterials, including hydrogels. A variety of bio-inspired microspheres with unique structures and properties have been developed as cellular carriers and drug delivery vehicles in recent years. In this review, we provide a comprehensive summary of the progress of functional and biodegradable microspheres that have been used for tissue regeneration over the last two decades. First, we briefly introduce the biomaterials and general methods for microsphere fabrication. Next, we focus on the newly developed technologies for preparing functional microspheres, including macroporous microspheres, nanofibrous microspheres, hollow microspheres, core-shell structured microspheres, and surface-modified functional microspheres. After that, we discuss the application of functional microspheres for tissue regeneration, specifically for bone, cartilage, dental, neural, cardiac, and skin tissue regeneration. Last, we present our perspectives and future directions of functional microspheres as injectable carriers for the future advancement of tissue regeneration.

Multipotential Role of Growth Factor Mimetic Peptides for Osteochondral Tissue Engineering

Articular cartilage is characterized by a poor self-healing capacity due to its aneural and avascular nature. Once injured, it undergoes a series of catabolic processes which lead to its progressive degeneration and the onset of a severe chronic disease called osteoarthritis (OA). In OA, important alterations of the morpho-functional organization occur in the cartilage extracellular matrix, involving all the nearby tissues, including the subchondral bone. Osteochondral engineering, based on a perfect combination of cells, biomaterials and biomolecules, is becoming increasingly successful for the regeneration of injured cartilage and underlying subchondral bone tissue. To this end, recently, several peptides have been explored as active molecules and enrichment motifs for the functionalization of biomaterials due to their ability to be easily chemically synthesized, as well as their tunable physico-chemical features, low immunogenicity issues and functional group modeling properties. In addition, they have shown a good aptitude to penetrate into the tissue due to their small size and stability at room temperature. In particular, growth-factor-derived peptides can play multiple functions in bone and cartilage repair, exhibiting chondrogenic/osteogenic differentiation properties. Among the most studied peptides, great attention has been paid to transforming growth factor-β and bone morphogenetic protein mimetic peptides, cell-penetrating peptides, cell-binding peptides, self-assembling peptides and extracellular matrix-derived peptides. Moreover, recently, phage display technology is emerging as a powerful selection technique for obtaining functional peptides on a large scale and at a low cost. In particular, these peptides have demonstrated advantages such as high biocompatibility; the ability to be immobilized directly on chondro- and osteoinductive nanomaterials; and improving the cell attachment, differentiation, development and regeneration of osteochondral tissue. In this context, the aim of the present review was to go through the recent literature underlining the importance of studying novel functional motifs related to growth factor mimetic peptides that could be a useful tool in osteochondral repair strategies. Moreover, the review summarizes the current knowledge of the use of phage display peptides in osteochondral tissue regeneration.

Articular cartilage reconstruction with TGF-β1-simulating self-assembling peptide hydrogel-based composite scaffold

Transforming growth factor-β (TGF-β) is an important inducing factor for the differentiation of mesenchymal stem cells and the secretion of collagen II, but the inaccessibility and instability limit its application in clinical practice. In this study, the TGF-β1-simulating peptide LIANAK (CM) was connected with the self-assembling peptide Ac-(RADA)₄-CONH₂ (RAD) to obtain the functionalized self-assembling peptide Ac-(RADA)₄-GG-LIANAK-CONH₂ (RAD-CM). The results indicated that the CM-functionalized RAD hydrogel contributed to the enhanced expressions of chondrogenic genes and extracellular matrix deposition. The self-assembling peptides were then combined with decellularized cartilage extracellular matrix (DCM) to construct a composite scaffold for articular cartilage repair. The CM-functionalized composite scaffold RAD/RAD-CM/DCM (R/C/D) exhibited good bioactivity and structural stability and exhibited satisfactory performance in promoting neocartilage restoration and the reconstruction of the osteochondral unit. This study provides a promising strategy for in situ cartilage regeneration via the stable presentation of TGF-β1-simulating peptide. STATEMENT OF SIGNIFICANCE: Deficiency of effective chondrogenic inducers (especially, the TGF-β family) significantly limits the self-regeneration of cartilage in osteochondral defect cases. Oligopeptide LIANAK, named CM, could simulate TGF-β1's bioactivity with particular structure, but traditional chemical crosslinking to polymer scaffolds resulted in risks of safety and complication, which is unfavorable for clinical applications. Here, self-assembling peptide RAD was used to load CM, to obtain a TGF-β1 mimetic peptide hydrogel. Depending on the homology (amino acids) of RAD and CM, the synthesis of the whole peptide only needs simply extended sequences of CM following that of RAD by automated solid-phase peptide synthesis. The modified peptide effectively demonstrated osteochondrogenic bioactivity, ensured the convenience, safety, and mass production, which displayed great potential in tissue engineering research and translational medicine.

Immuno-activated mesenchymal stem cell living electrospun nanofibers for promoting diabetic wound repair

Diabetic wound is the leading cause of non-traumatic amputations in which oxidative stress and chronic inflammation are main factors affecting wound healing. Although mesenchymal stem cells (MSCs) as living materials can promote skin regeneration, they are still vulnerable to oxidative stress which limits their clinical applications. Herein, we have prepared (polylactic-co-glycolic acid) (PLGA) nanofibers electrospun with LPS/IFN-γ activated macrophage cell membrane. After defining physicochemical properties of the nanofibers modified by LPS/IFN-γ activated mouse RAW264.7 cell derived membrane (RCM-fibers), we demonstrated that the RCM-fibers improved BMMSC proliferation and keratinocyte migration upon oxidative stress in vitro. Moreover, bone marrow derived MSCs (BMMSCs)-loaded RCM-fibers (RCM-fiber-BMMSCs) accelerated wound closure accompanied by rapid re-epithelialization, collagen remodeling, antioxidant stress and angiogenesis in experimental diabetic wound healing in vivo. Transcriptome analysis revealed the upregulation of genes related to wound healing in BMMSCs when co-cultured with the RCM-fibers. Enhanced healing capacity of RCM-fiber-BMMSCs living material was partially mediated through CD200-CD200R interaction. Similarly, LPS/IFN-γ activated THP-1 cell membrane coated nanofibers (TCM-fibers) exhibited similar improvement of human BMMSCs (hBMMSCs) on diabetic wound healing in vivo. Our results thus demonstrate that LPS/IFN-γ activated macrophage cell membrane-modified nanofibers can in situ immunostimulate the biofunctions of BMMSCs, making this novel living material promising in wound repair of human diabetes.

Injectable hydrogels for bone and cartilage tissue engineering: a review

Tissue engineering, using a combination of living cells, bioactive molecules, and three-dimensional porous scaffolds, is a promising alternative to traditional treatments such as the use of autografts and allografts for bone and cartilage tissue regeneration. Scaffolds, in this combination, can be applied either through surgery by implantation of cell-seeded pre-fabricated scaffolds, or through injection of a solidifying precursor and cell mixture, or as an injectable cell-seeded pre-fabricated scaffold. In situ forming and pre-fabricated injectable scaffolds can be injected directly into the defect site with complex shape and critical size in a minimally invasive manner. Proper and homogeneous distribution of cells, biological factors, and molecular signals in these injectable scaffolds is another advantage over pre-fabricated scaffolds. Due to the importance of injectable scaffolds in tissue engineering, here different types of injectable scaffolds, their design challenges, and applications in bone and cartilage tissue regeneration are reviewed.

Macrophage membrane-functionalized nanofibrous mats and their immunomodulatory effects on macrophage polarization

Immunomodulation is an important phenomenon in the normal mammalian host response toward an injury, and plays a critical role in tissue regeneration and regenerative medicine. Different phenotypes of macrophages show an array of activation states compassing pro-inflammatory to pro-alleviating cells, which are the critical players to modulate immune response and tissue regeneration. In this study, macrophage membranes of different phenotypes (macrophages (M0), classically activated macrophages (M1) and alternatively activated macrophages (M2)) were coated onto poly-ε-caprolactone (PCL) nanofibers to acquire exterior surface proteins and similar functions of the natural membranes. In vitro results unveiled that these nanofibers, especially the M2-PCL nanofibers, can suppress the activities of inflammatory markers such as TNF-α and IL-1β, and stimulate anti-inflammatory markers such as Arg-1, IL-10 and TGF-β. In a C57BL/6 mouse model, the macrophage membrane-coated nanofibers, especially the M2-PCL nanofibers, displayed minimal cellular infiltration and low collagen deposition, increased anti-inflammatory CD206 and decreased inflammatory CD86 levels. The M2-PCL nanofibers most effectively neutralized inflammatory chemokines, regulated the expression of inflammation-associated genes as well as anti-inflammatory genes, and showed strong immunomodulatory effects than the PCL, M0-PCL and M1-PCL nanofibers. STATEMENT OF SIGNIFICANCE: Different types of macrophage membrane-functionalized PCL nanofibers were successfully prepared and well characterized. They inherited the surface proteins imitating the source macrophages, and played an important role in limiting cellular infiltration and collagen deposition. These different macrophages and their membrane-coated nanofibers (M0-PCL, M1-PCL and M2-PCL) behaved like their respective source cells. The M2 mimicking M2-PCL nanofibers effectively polarized macrophages to M2 phenotype and decreased the expression of inflammation-associated chemokines and promoted the anti-inflammation in vitro and in vivo, which is critical for tissue regeneration. The mice implanted with the bio-mimicking M2-PCL nanofibers effectively inhibited toll like receptors signaling induced NF-kB and IRF-5 and their target genes such as Edn-1, IL-6, iNOS, TNF-α, etc. compared to the PCL, and M0-PCL and M1-PCL macrophage membrane-coated nanofibers.

Poly-l-Lactic Acid (PLLA)-Based Biomaterials for Regenerative Medicine: A Review on Processing and Applications

Synthetic biopolymers are effective cues to replace damaged tissue in the tissue engineering (TE) field, both for in vitro and in vivo application. Among them, poly-l-lactic acid (PLLA) has been highlighted as a biomaterial with tunable mechanical properties and biodegradability that allows for the fabrication of porous scaffolds with different micro/nanostructures via various approaches. In this review, we discuss the structure of PLLA, its main properties, and the most recent advances in overcoming its hydrophobic, synthetic nature, which limits biological signaling and protein absorption. With this aim, PLLA-based scaffolds can be exposed to surface modification or combined with other biomaterials, such as natural or synthetic polymers and bioceramics. Further, various fabrication technologies, such as phase separation, electrospinning, and 3D printing, of PLLA-based scaffolds are scrutinized along with the in vitro and in vivo applications employed in various tissue repair strategies. Overall, this review focuses on the properties and applications of PLLA in the TE field, finally affording an insight into future directions and challenges to address an effective improvement of scaffold properties.

Ultrathin 2D Titanium Carbide MXene (Ti3 C2 Tx ) Nanoflakes Activate WNT/HIF-1α-Mediated Metabolism Reprogramming for Periodontal Regeneration

Periodontal defect regeneration in severe periodontitis relies on the differentiation and proliferation of periodontal ligament cells (PDLCs). Recently, an emerging 2D nanomaterial, MXene (Ti₃ C₂ T_x ), has gained more and more attention due to the extensive antibacterial and anticancer activity, while its potential biomedical application on tissue regeneration remains unclear. Through a combination of experimental and multiscale simulation schemes, Ti₃ C₂ T_x has exhibited satisfactory biocompatibility and induced distinguish osteogenic differentiation of human PDLCs (hPDLCs), with upregulated osteogenesis-related genes. Ti₃ C₂ T_x manages to activate the Wnt/β-catenin signaling pathway by enhancing the Wnt-Frizzled complex binding, thus stabilizing HIF-1α and altering metabolic reprogramming into glycolysis. In vivo, hPDLCs pretreated by Ti₃ C₂ T_x display excellent performance in new bone formation and osteoclast inhibition with enhanced RUNX2, HIF-1α, and β-catenin in an experimental rat model of periodontal fenestration defects, indicating that this material has high efficiency of periodontal regeneration promotion. It is demonstrated in this work that Ti₃ C₂ T_x has highly efficient therapeutic effects in osteogenic differentiation and periodontal defect repairment.

Chondroinductive Peptides for Cartilage Regeneration

Inducing and maintaining a hyaline cartilage phenotype is the greatest challenge for cartilage regeneration. Synthetic chondroinductive biomaterials might be the answer to the unmet clinical need for a safe, stable, and cost-effective material capable of inducing true hyaline cartilage formation. The past decade witnessed an emergence of peptides to achieve chondrogenesis, as peptides have the advantages of versatility, high target specificity, minimized toxicity and immunogenicity, and ease of synthesis. Here, we review peptides as the basis for creating promising synthetic chondroinductive biomaterials for in situ scaffold-based cartilage regeneration. We provide a thorough review of peptides evaluated for cartilage regeneration while distinguishing between peptides reported to induce chondrogenesis independently, and peptides reported to act in synergy with other growth factors to induce cartilage regeneration. Additionally, we highlight that most peptide studies have been in vitro, and appropriate controls are not always present. A few rigorously-performed in vitro studies have proceeded to in vivo studies, but the peptides in those in vivo studies were mainly introduced via systemic, subcutaneous, or intraarticular injections, with a paucity of studies employing in situ defects with appropriate controls. Clinical translation of peptides will require the evaluation of these peptides in well-controlled in vivo cartilage defect studies. In the decade ahead, we may be poised to leverage peptides to design devices that are safe, reproducible, cost-efficient, and scalable biomaterials, which are themselves chondroinductive to achieve true hyaline cartilage regeneration without the need for growth factors and other small molecules.

3D bio-printed biphasic scaffolds with dual modification of silk fibroin for the integrated repair of osteochondral defects

Repair of osteochondral defects is still a challenge, especially the regeneration of hyaline cartilage. Parathyroid hormone (PTH) can inhibit the hypertrophy of chondrocytes to maintain the phenotype of hyaline cartilage. Here, we aimed to construct a bio-printed biphasic scaffold with a mechanical gradient based on dual modification of silk fibroin (SF) for the integrated repair of osteochondral defects. Briefly, SF was grafted with PTH (SF-PTH) and covalently immobilized with methacrylic anhydride (SF-MA), respectively. Next, gelatin methacryloyl (GM) mixed with SF-PTH or SF-MA was used as a bio-ink for articular cartilage and subchondral bone regeneration. Finally, the GM + SF-PTH/GM + SF-MA osteochondral biphasic scaffold was constructed using 3D bioprinting technology, and implanted in a rabbit osteochondral defect model. In this study, the SF-PTH bio-ink was synthesized for the first time. In vitro results indicated that the GM + SF-MA bio-ink had good mechanical properties, while the GM + SF-PTH bio-ink inhibited the hypertrophy of chondrocytes and was beneficial for the production of hyaline cartilage extracellular matrix. Importantly, an integrated GM + SF-PTH/GM + SF-MA biphasic scaffold with a mechanical gradient was successfully constructed. The results in vivo demonstrated that the GM + SF-PTH/GM + SF-MA scaffold could promote the regeneration of osteochondral defects and maintain the phenotype of hyaline cartilage to a large extent. Collectively, our results indicate that the integrated GM + SF-PTH/GM + SF-MA biphasic scaffold constructed by 3D bioprinting is expected to become a new strategy for the treatment of osteochondral defects.

Xeno- and Feeder-Free Differentiation of Human iPSCs to Trabecular Meshwork-Like Cells by Recombinant Cytokines

Purpose

Stem cell-based therapy has the potential to become one approach to regenerate the damaged trabecular meshwork (TM) in glaucoma. Co-culture of induced pluripotent stem cells (iPSCs) with human TM cells has been a successful approach to generate autologous TM resembling cells. However, the differentiated cells generated using this approach are still problematic for clinical usage. This study aimed to develop a clinically applicable strategy for generating TM-like cells from iPSCs.

Methods

Highly expressed receptors during iPSC differentiation were identified by AutoSOME, Gene Ontology, and reverse transcription polymerase chain reaction (RT-PCR) analysis. The recombinant cytokines that bind to these receptors were used to generate a new differentiation protocol. The resultant TM-like cells were characterized morphologically, immunohistochemically, and transcriptionally.

Results

We first determined two stages of iPSC differentiation and identified highly expressed receptors associated with the differentiation at each stage. The expression of these receptors was further confirmed by RT-PCR analysis. Exposure to the recombinant cytokines that bind to these receptors, including transforming growth factor beta 1, nerve growth factor beta, erythropoietin, prostaglandin F2 alpha, and epidermal growth factor, can efficiently differentiate iPSCs into TM-like cells, which express TM biomarkers and can form dexamethasone-inducible CLANs.

Conclusions

We successfully generated a xeno- and feeder-free differentiation protocol with recombinant cytokines to generate the TM progenitor and TM-like cells from human iPSCs.

Translational Relevance

The new approach minimizes the risks from contamination and also improves the differentiation efficiency and consistency, which are particularly crucial for clinical use of stem cells in glaucoma treatment.

Strategies to Control or Mimic Growth Factor Activity for Bone, Cartilage, and Osteochondral Tissue Engineering

Growth factors play a critical role in tissue repair and regeneration. However, their clinical success is limited by their low stability, short half-life, and rapid diffusion from the delivery site. Supraphysiological growth factor concentrations are often required to demonstrate efficacy but can lead to adverse reactions, such as inflammatory complications and increased cancer risk. These issues have motivated the development of delivery systems that enable sustained release and controlled presentation of growth factors. This review specifically focuses on bioconjugation strategies to enhance growth factor activity for bone, cartilage, and osteochondral applications. We describe approaches to localize growth factors using noncovalent and covalent methods, bind growth factors via peptides, and mimic growth factor function with mimetic peptide sequences. We also discuss emerging and future directions to control spatiotemporal growth factor delivery to improve functional tissue repair and regeneration.

Recent Progress on Biodegradable Tissue Engineering Scaffolds Prepared by Thermally-Induced Phase Separation (TIPS)

Porous biodegradable scaffolds provide a physical substrate for cells allowing them to attach, proliferate and guide the formation of new tissues. A variety of techniques have been developed to fabricate tissue engineering (TE) scaffolds, among them the most relevant is the thermally-induced phase separation (TIPS). This technique has been widely used in recent years to fabricate three-dimensional (3D) TE scaffolds. Low production cost, simple experimental procedure and easy processability together with the capability to produce highly porous scaffolds with controllable architecture justify the popularity of TIPS. This paper provides a general overview of the TIPS methodology applied for the preparation of 3D porous TE scaffolds. The recent advances in the fabrication of porous scaffolds through this technique, in terms of technology and material selection, have been reviewed. In addition, how properties can be effectively modified to serve as ideal substrates for specific target cells has been specifically addressed. Additionally, examples are offered with respect to changes of TIPS procedure parameters, the combination of TIPS with other techniques and innovations in polymer or filler selection.

Potential and recent advances of microcarriers in repairing cartilage defects

Articular cartilage regeneration is one of the challenges faced by orthopedic surgeons. Microcarrier applications have made great advances in cartilage tissue engineering in recent years and enable cost-effective cell expansion, thus providing permissive microenvironments for cells. In addition, microcarriers can be loaded with proteins, factors, and drugs for cartilage regeneration. Some microcarriers also have the advantages of injectability and targeted delivery. The application of microcarriers with these characteristics can overcome the limitations of traditional methods and provide additional advantages. In terms of the transformation potential, microcarriers have not only many advantages, such as providing sufficient and beneficial cells, factors, drugs, and microenvironments for cartilage regeneration, but also many application characteristics; for example, they can be injected to reduce invasiveness, transplanted after microtissue formation to increase efficiency, or combined with other stents to improve mechanical properties. Therefore, this technology has enormous potential for clinical transformation. In this review, we focus on recent advances in microcarriers for cartilage regeneration. We compare the characteristics of microcarriers with other methods for repairing cartilage defects, provide an overview of the advantages of microcarriers, discuss the potential of microcarrier systems, and present an outlook for future development.

Translational potential of this article

We reviewed the advantages and recent advances of microcarriers for cartilage regeneration. This review could give many scholars a better understanding of microcarriers, which can provide doctors with potential methods for treating patients with cartilage injure.

Cell-free scaffolds functionalized with bionic cartilage acellular matrix microspheres to enhance the microfracture treatment of articular cartilage defects

Microfracture surgery remains the most popular treatment for articular cartilage lesions in the clinic, but often leads to the formation of inferior fibrocartilage tissue and damage to subchondral bone. To overcome these problems, extracellular matrix (ECM) scaffolds derived from decellularized natural cartilaginous tissues were introduced and showed excellent biological properties to direct the differentiation of bone marrow stem cells. However, besides the limited allogenic/allogenic supply and the risk of disease transfer from xenogeneic tissues, the effectiveness of ECM scaffolds always varied with a high variability of natural tissue quality. In this study, we developed composite scaffolds functionalized with a cell-derived ECM source, namely, bionic cartilage acellular matrix microspheres (BCAMMs), that support the chondrogenic differentiation of bone marrow cells released from microfracture. The scaffolds with BCAMMs at different developmental stages were investigated in articular cartilage regeneration and subchondral bone repair. Compared to microfracture, the addition of cell-free BCAMM scaffolds has demonstrated a great improvement of regenerated cartilage tissue quality in a rabbit model as characterized by a semi-quantitative analysis of cells, histology and biochemical assays as well as micro-CT images. Moreover, the variation in ECM properties was found to significantly affect the cartilage regeneration, highlighting the challenges of homogenous scaffolds in working with microfracture. Together, our results demonstrate that the biofunctionalized BCAMM scaffold with cell-derived ECM shows great potential to combine with microfracture for clinical translation to repair cartilage defects.

Advances in Growth Factor Delivery for Bone Tissue Engineering

Shortcomings related to the treatment of bone diseases and consequent tissue regeneration such as transplants have been addressed to some extent by tissue engineering and regenerative medicine. Tissue engineering has promoted structures that can simulate the extracellular matrix and are capable of guiding natural bone repair using signaling molecules to promote osteoinduction and angiogenesis essential in the formation of new bone tissues. Although recent studies on developing novel growth factor delivery systems for bone repair have attracted great attention, taking into account the complexity of the extracellular matrix, scaffolding and growth factors should not be explored independently. Consequently, systems that combine both concepts have great potential to promote the effectiveness of bone regeneration methods. In this review, recent developments in bone regeneration that simultaneously consider scaffolding and growth factors are covered in detail. The main emphasis in this overview is on delivery strategies that employ polymer-based scaffolds for spatiotemporal-controlled delivery of both single and multiple growth factors in bone-regeneration approaches. From clinical applications to creating alternative structural materials, bone tissue engineering has been advancing constantly, and it is relevant to regularly update related topics.

Advanced Polymer-Based Drug Delivery Strategies for Meniscal Regeneration

The meniscus plays a critical role in maintaining knee joint homeostasis. Injuries to the meniscus, especially considering the limited self-healing capacity of the avascular region, continue to be a challenge and are often treated by (partial) meniscectomy, which has been identified to cause osteoarthritis. Currently, meniscus tissue engineering focuses on providing extracellular matrix (ECM)-mimicking scaffolds to direct the inherent meniscal regeneration process, and it has been found that various stimuli are essential. Numerous bioactive factors present benefits in regulating cell fate, tissue development, and healing, but lack an optimal delivery system. More recently, bioengineers have developed various polymer-based drug delivery systems (PDDSs), which are beneficial in terms of the favorable properties of polymers as well as novel delivery strategies. Engineered PDDSs aim to provide not only an ECM-mimicking microenvironment but also the controlled release of bioactive factors with release profiles tailored according to the biological concerns and properties of the factors. In this review, both different polymers and bioactive factors involved in meniscal regeneration are discussed, as well as potential candidate systems, with examples of recent progress. This article aims to summarize drug delivery strategies in meniscal regeneration, with a focus on novel delivery strategies rather than on specific delivery carriers. The current challenges and future prospects for the structural and functional regeneration of the meniscus are also discussed. Impact statement Meniscal injury remains a clinical Gordian knot owing to the limited healing potential of the region, restricted surgical approaches, and risk of inducing osteoarthritis. Existing tissue engineering scaffolds that provide mechanical support and a favorable microenvironment also lack biological cues. Advanced polymer-based delivery strategies consisting of polymers incorporating bioactive factors have emerged as a promising direction. This article primarily reviews the types and applications of biopolymers and bioactive factors in meniscal regeneration. Importantly, various carrier systems and drug delivery strategies are discussed with the hope of inspiring further advancements in this field.

Bioinspired stratified electrowritten fiber-reinforced hydrogel constructs with layer-specific induction capacity for functional osteochondral regeneration

Despite significant advances in osteochondral tissue engineering, it remains challenging to successfully reconstruct native-like complex tissues organized in three-dimension with spatially varying compositional, structural and functional properties. In this contribution, inspired by the gradients in extracellular matrix (ECM) composition and collagen fiber architecture in native osteochondral tissue, we designed and fabricated a tri-layered (superficial cartilage (S), deep cartilage (D) and subchondral bone (B) layer) stratified scaffold in which a mesenchymal stem cell (MSC)-laden gelatin methacrylamide (GelMA) hydrogel with zone-specific growth factor delivery was combined with melt electrowritten triblock polymer of poly(ε-caprolactone) and poly(ethylene glycol) (PCEC) networks with depth-dependent fiber organization. Introducing PCEC fibers into the weak GelMA hydrogel contributed to a significant increase in mechanical strength. In vitro biological experiments indicated that the stratified fiber-reinforced and growth factor-loaded hydrogel construct induced the MSCs to differentiate down both the chondrogenic and osteogenic lineages and that the engineered complex exhibited cellular phenotype and matrix accumulation profiles resembling those of the native tissue. Simultaneous cartilage and subchondral bone regeneration were achieved in vivo by using the tri-layered integrated scaffold. More importantly, the inclusion of the S layer could impart the regenerated cartilage with a more lubricating and wear-resistant surface. These findings suggest that the bioinspired construct mimicking the spatial variations of native osteochondral tissue might serve as a promising candidate to enhance osteochondral regeneration.

The Role of the Microenvironment in Controlling the Fate of Bioprinted Stem Cells

The field of tissue engineering and regenerative medicine has made numerous advances in recent years in the arena of fabricating multifunctional, three-dimensional (3D) tissue constructs. This can be attributed to novel approaches in the bioprinting of stem cells. There are expansive options in bioprinting technology that have become more refined and specialized over the years, and stem cells address many limitations in cell source, expansion, and development of bioengineered tissue constructs. While bioprinted stem cells present an opportunity to replicate physiological microenvironments with precision, the future of this practice relies heavily on the optimization of the cellular microenvironment. To fabricate tissue constructs that are useful in replicating physiological conditions in laboratory settings, or in preparation for transplantation to a living host, the microenvironment must mimic conditions that allow bioprinted stem cells to proliferate, differentiate, and migrate. The advances of bioprinting stem cells and directing cell fate have the potential to provide feasible and translatable approach to creating complex tissues and organs. This review will examine the methods through which bioprinted stem cells are differentiated into desired cell lineages through biochemical, biological, and biomechanical techniques.

Growth Factor and Its Polymer Scaffold-Based Delivery System for Cartilage Tissue Engineering

The development of biomaterials, stem cells and bioactive factors has led to cartilage tissue engineering becoming a promising tactic to repair cartilage defects. Various polymer three-dimensional scaffolds that provide an extracellular matrix (ECM) mimicking environment play an important role in promoting cartilage regeneration. In addition, numerous growth factors have been found in the regenerative process. However, it has been elucidated that the uncontrolled delivery of these factors cannot fully exert regenerative potential and can also elicit undesired side effects. Considering the complexity of the ECM, neither scaffolds nor growth factors can independently obtain successful outcomes in cartilage tissue engineering. Therefore, collectively, an appropriate combination of growth factors and scaffolds have great potential to promote cartilage repair effectively; this approach has become an area of considerable interest in recent investigations. Of late, an increasing trend was observed in cartilage tissue engineering towards this combination to develop a controlled delivery system that provides adequate physical support for neo-cartilage formation and also enables spatiotemporally delivery of growth factors to precisely and fully exert their chondrogenic potential. This review will discuss the role of polymer scaffolds and various growth factors involved in cartilage tissue engineering. Several growth factor delivery strategies based on the polymer scaffolds will also be discussed, with examples from recent studies highlighting the importance of spatiotemporal strategies for the controlled delivery of single or multiple growth factors in cartilage tissue engineering applications.

Controlled release of odontogenic exosomes from a biodegradable vehicle mediates dentinogenesis as a novel biomimetic pulp capping therapy

Mineralized enamel and dentin provide protection to the dental pulp, which is vital tissue rich with cells, vasculature, and nerves in the inner tooth. Dental caries left untreated threaten exposure of the dental pulp, providing facile access for bacteria to cause severe infection both in the pulp and systemically. Dental materials which stimulate the formation of a protective dentin bridge after insult are necessary to seal the pulp chamber in an effort to maintain natural dentition and prevent pulpal infection. Dental materials to date including calcium hydroxide paste, mineral trioxide aggregate, and glass ionomer resin, are used with mixed results. Herein we exploited the cell-cell communicative properties of exosomes, extracellular vesicles derived from both mineralizing primary human dental pulp stem cells (hDPSCs) and an immortalized murine odontoblast cell line (MDPC-23), to catalyze the formation of a reactionary dentin bridge by recruiting endogenous stem cells of the dental pulp, through an easy-to-handle delivery vehicle which allows for their therapeutic controlled delivery at the pulp interface. Exosomes derived from both hDPSCs and MDPCs upregulated odontogenic gene expression and increased mineralization in vitro. We designed an amphiphilic synthetic polymeric vehicle from a triblock copolymer which encapsulates exosomes by polymeric self-assembly and maintains their biologic integrity throughout release up to 8-12 weeks. The controlled release of odontogenic exosomes resulted in a reparative dentin bridge formation, superior to glass-ionomer cement alone in vivo, in a rat molar pulpotomy model after six weeks. We have developed a platform for the encapsulation and controlled, tunable release of cell-derived exosomes, which maintains their advantageous physiologic properties reflective of the donor cells. This platform is used to modulate downstream recipient cells towards a designed dentinogenic trajectory in vitro and in vivo. Additionally, we have demonstrated the utility of an immortalized cell line to produce a high yield of exosomes with cross-species efficacy.

Nanofibrous spongy microspheres to deliver rabbit mesenchymal stem cells and anti-miR-199a to regenerate nucleus pulposus and prevent calcification

Lower back pain is mainly caused by intervertebral disc degeneration, in which calcification is frequently involved. Here novel nanofibrous spongy microspheres (NF-SMS) are used to carry rabbit bone marrow mesenchymal stromal cells (MSCs) to regenerate nucleus pulposus tissues. NF-SMS are shown to significantly enhance the MSC seeding, proliferation and differentiation over control microcarriers. Furthermore, a hyperbranched polymer (HP) with negligible cytotoxicity and high microRNA (miRNAs) binding affinity is synthesized. The HP can complex with anti-miR-199a and self-assemble into "double shell" polyplexes which are able to achieve high transfection efficiency into MSCs. A double-emulsion technique is used to encapsulate these polyplexes in biodegradable nanospheres (NS) to enable sustained anti-miR-199 delivery. Our results demonstrate that MSC/HP-anti-miR-199a/NS/NF-SMS constructs can promote the nucleus pulposus (NP) phenotype and resist calcification in vitro and in a subcutaneous environment. Furthermore, injection of MSC/HP-anti-miR-199a/NS/NF-SMS can stay in place, produce functional extracellular matrix, maintain disc height and prevent intervertebral disc (IVD) calcification in a rabbit lumbar degeneration model.

Biodegradable nanofibrous temperature-responsive gelling microspheres for heart regeneration

Myocardial infarction (heart attack) is the number one killer of heart patients. Existing treatments for heart attack do not address the underlying problem of cardiomyocyte (CM) loss and cannot regenerate the myocardium. Introducing exogenous cardiac cells is required for heart regeneration due to the lack of resident progenitor cells and very limited proliferative potential of adult CMs. Poor retention of transplanted cells is the critical bottleneck of heart regeneration. Here, we report the invention of a poly(l-lactic acid)-b-poly(ethylene glycol)-b-poly(N-Isopropylacrylamide) copolymer and its self-assembly into nanofibrous gelling microspheres (NF-GMS). The NF-GMS undergo thermally responsive transition to form not only a 3D hydrogel after injection in vivo, but also exhibit architectural and structural characteristics mimicking the native extracellular matrix (ECM) of nanofibrous proteins and gelling proteoglycans or polysaccharides. By integrating the ECM-mimicking features, injectable form, and the capability of maintaining 3D geometry after injection, the transplantation of hESC-derived CMs carried by NF-GMS led to a striking 10-fold graft size increase over direct CM injection in an infarcted rat model, which is the highest reported engraftment to date. Furthermore, NF-GMS carried CM transplantation dramatically reduced infarct size, enhanced integration of transplanted CMs, stimulated vascularization in the infarct zone, and led to a substantial recovery of cardiac function. The NF-GMS may also serve as advanced injectable and integrative biomaterials for cell/biomolecule delivery in a variety of biomedical applications.

Biodegradable nanofibrous temperature-responsive gelling microspheres for heart regeneration

Myocardial infarction (heart attack) is the number one killer of heart patients. Existing treatments for heart attack do not address the underlying problem of cardiomyocyte (CM) loss and cannot regenerate the myocardium. Introducing exogenous cardiac cells is required for heart regeneration due to the lack of resident progenitor cells and very limited proliferative potential of adult CMs. Poor retention of transplanted cells is the critical bottleneck of heart regeneration. Here, we report the invention of a poly(l-lactic acid)-b-poly(ethylene glycol)-b-poly(N-Isopropylacrylamide) copolymer and its self-assembly into nanofibrous gelling microspheres (NF-GMS). The NF-GMS undergo thermally responsive transition to form not only a 3D hydrogel after injection in vivo, but also exhibit architectural and structural characteristics mimicking the native extracellular matrix (ECM) of nanofibrous proteins and gelling proteoglycans or polysaccharides. By integrating the ECM-mimicking features, injectable form, and the capability of maintaining 3D geometry after injection, the transplantation of hESC-derived CMs carried by NF-GMS led to a striking 10-fold graft size increase over direct CM injection in an infarcted rat model, which is the highest reported engraftment to date. Furthermore, NF-GMS carried CM transplantation dramatically reduced infarct size, enhanced integration of transplanted CMs, stimulated vascularization in the infarct zone, and led to a substantial recovery of cardiac function. The NF-GMS may also serve as advanced injectable and integrative biomaterials for cell/biomolecule delivery in a variety of biomedical applications.

Engineering Biomimetic Nanofiber Microspheres with Tailored Size, Predesigned Structure, and Desired Composition via Gas Bubble-Mediated Coaxial Electrospray

Minimally invasive therapies avoiding surgical complexities evoke great interest in developing injectable biomedical devices. Herein, a versatile approach is reported for engineering injectable and biomimetic nanofiber microspheres (NMs) with tunable sizes, predesigned structures, and desired compositions via gas bubble-mediated coaxial electrospraying. The sizes and structures of NMs are controlled by adjusting processing parameters including air flow rate, applied voltage, distance, and spinneret configuration in the coaxial setup. Importantly, unlike the self-assembly method, this technique can be used to fabricate NMs from any material feasible for electrospinning or other nanofiber fabrication techniques. To demonstrate the versatility, open porous NMs are successfully fabricated that consist of various short nanofibers made of poly(ε-caprolactone), poly(lactic-co-glycolic acid), gelatin, methacrylated gelatin, bioglass, and magneto-responsive polymer composites. Open porous NMs support human neural progenitor cell growth in 3D with a larger number and more neurites than nonporous NMs. Additionally, highly open porous NMs show faster cell infiltration and host tissue integration than nonporous NMs after subcutaneous injection to rats. Such a novel class of NMs holds great potential for many biomedical applications such as tissue filling, cell and drug delivery, and minimally invasive tissue regeneration.

"All-in-One" Gel System for Whole Procedure of Stem-Cell Amplification and Tissue Engineering

Microsphere (MS)-based systems provides great advantages for cell expansion and transplantation due to their high surface-to-volume ratio and biomimetic environment. However, a MS-based system that includes cell attachment, proliferation, passage, harvest, cryopreservation, and tissue engineering together has not been realized yet. An "all-in-one" gel MS-based system is established for human adipose-derived mesenchymal stem cells (hADSCs), realizing real 3D culture with enhanced expansion efficiency and simplified serial cell culture operations, and construction of macrotissues with uniform cell distribution and specific function. A 3D digital light-processing technology is developed to fabricate gel MSs in an effective way. The printed MSs present a suitable environment with rough surface architecture and the mechanical properties of soft tissues, leading to high cell viability, attachment, proliferation, activity, and differentiation potential. Further, convenient standard operation procedures, including cell passage, detachment, and cryopreservation, are established for cell culture on the gel MSs. Finally, hADSCs-loaded gel MSs form macrotissues through a "bottom-up" approach, which demonstrates the potential applications for tissue engineering. These findings exhibit the feasibility and beauty of "all-in-one" stem cell culture and tissue engineering system.

Self-Assembled Human Adipose-Derived Stem Cell-Derived Extracellular Vesicle-Functionalized Biotin-Doped Polypyrrole Titanium with Long-Term Stability and Potential Osteoinductive Ability

Mesenchymal stem cell-derived extracellular vesicles (MSC-EVs), containing proteins or microRNAs (miRNAs), possessing various biological activity and low immunogenicity, are considered promising for surface modification of bone grafts. However, the modification efficiency is not satisfied yet, resulting in compromised therapy effects. Here, we report a novel immobilized method by self-assembling biotinylated MSC-EVs onto the surface of biotin-doped polypyrrole titanium (Bio-Ppy-Ti) to improve its biofunctions in vitro and in vivo. Using this method, the amount of human adipose-derived stem cell-EVs (hASC-EVs) anchored onto the Bio-Ppy-Ti surface was 185-fold higher than that of pure Ti after ultrasonic concussion for 30 s and it remained stable on the Bio-Ppy-Ti surface for 14 days at 4 °C. Compared to pristine Ti, EV-Bio-Ppy-Ti exhibited enhanced cell compatibility and osteoinductivity for osteoblasts in vitro and anti-apoptosis ability in the ectopic bone formation mode. Gene chip analysis further demonstrated that several osteoinductive miRNAs were encapsulated in hASC-EVs, which may explain the high bone regeneration ability of EV-Bio-Ppy-Ti. Thus, this MSC-EV biotin-immobilized method appears to be highly efficient and long-term stable for bone graft bioactive modification, demonstrating its potential for clinical metal implants.

Tethering peptides onto biomimetic and injectable nanofiber microspheres to direct cellular response

Biomimetic and injectable nanofiber microspheres (NMs) could be ideal candidate for minimally invasive tissue repair. Herein, we report a facile approach to fabricate peptide-tethered NMs by combining electrospinning, electrospraying, and surface conjugation techniques. The composition and size of NMs can be tuned by varying the processing parameters during the fabrication. Further, bone morphogenic protein-2 (BMP-2) and vascular endothelial growth factor (VEGF) mimicking peptides have been successfully tethered onto poly(ε-caprolactone) (PCL):gelatin:(gelatin-methacryloyl) (GelMA)(1:0.5:0.5) NMs through photocrosslinking of the methacrylic group in GelMA and octenyl alanine (OCTAL) in the modified peptides. The BMP-2-OCTAL peptide-tethered NMs significantly promote osteogenic differentiation of bone marrow-derived stem cells (BMSCs). Moreover, human umbilical vein endothelial cells (HUVECs) seeded on VEGF mimicking peptide QK-OCTAL-tethered NMs significantly up-regulated vascular-specific proteins, leading to microvascularization. The strategy developed in this work holds great potential in developing a biomimetic and injectable carrier to efficiently direct cellular response (Osteogenesis and Angiogenesis) for tissue repair.

A facile green approach for fabricating bacterial cellulose scaffold with macroporous structure and cell affinity

Bacterial cellulose holds great promise for tissue engineering, but its application is greatly limited due to the lack of large pores and poor cell affinity. In this study, macroporous bacterial cellulose was fabricated through the dissolution of gelatin microspheres, which were incorporated with bacterial cellulose during bacterial cellulose fabrication. Then, gelatin was immobilized onto bacterial cellulose surface via procyanidins crosslinking. The results confirmed that the scaffolds possessed interconnected macroporous structure, high porosity, good water uptake ability, and good mechanical properties. The results of evaluation of cells showed that cells migrated to the inner of macroporous affinitive bacterial cellulose and displayed better spreading as well as proliferation than that on pure bacterial cellulose surfaces. The macroporous affinitive bacterial cellulose show potential as a scaffold for tissue engineering.