Ice-Templated Protein Nanoridges Induce Bone Tissue Formation

Aptamer-free upconversion nanoparticle/silk biosensor system for low-cost and highly sensitive detection of antibiotic residues

The detection of antibiotics is crucial for safeguarding the environment, ensuring food safety, and promoting human health. However, developing a rapid, convenient, low-cost, and sensitive method for antibiotic detection presents significant challenges. Herein, an aptamer-free biosensor was successfully constructed using upconversion nanoparticles (UCNPs) coated with silk fibroin (SF), based on Förster resonance energy transfer (FRET) and the charge-transfer effect, for detecting roxithromycin (RXM). A synergistic FRET efficiency was achieved by utilizing alizarin red and RXM complexes as energy acceptors, with UCNP as the energy donor, and immobilizing an ultrathin SF protein corona within 10 nm. The biosensor detects RXM in deionized water with high sensitivity primarily through monolayer adsorption, with a detection range of 1.0 nM-141.6 nM and a detection limit as low as 0.68 nM. The performance of this biosensor was compared with the ultra-performance liquid chromatography-mass spectrometry (UPLC-MS/MS) method for detecting antibiotics in river water separately and a strong correlation between the two methods was observed. The biosensor exhibited long-term stability in aqueous solutions (up to 60 d) with no attenuation of fluorescence intensity. Furthermore, the biosensor's applicability extended to the highly sensitive detection of other antibiotics, such as azithromycin. This study introduces a low-cost, eco-friendly, and highly sensitive method for antibiotic detection, with broad potential for future applications in environmental, healthcare, and food-related fields.

Green, Low-carbon Silk-based Materials in Water Treatment: Current State and Future Trends

The improper and inadequate treatment of industrial, agricultural, and household wastewater exerts substantial pressure on the existing ecosystem and poses a serious threat to the health of both humans and animals. To address these issues, different types of materials have been employed to eradicate detrimental pollutants from wastewater and facilitate the reuse of water resources. Nevertheless, owing to the challenges associated with the degradation of these traditional materials post-use and their incompatibility with the environment, natural biopolymers have garnered considerable interest. Silk protein, as a biomacromolecule, exhibits advantageous characteristics including environmental friendliness, low carbon emissions, biodegradability, sustainability, and biocompatibility. Considering recent research findings, this comprehensive review outlines the structure and properties of silk proteins and offers a detailed overview of the manufacturing techniques employed in the production of silk-based materials (SBMs) spanning different forms. Furthermore, it conducts an in-depth analysis of the state-of-the-art SBMs for water treatment purposes, encompassing adsorption, catalysis, water disinfection, desalination, and biosensing. The review highlights the potential of SBMs in addressing the challenges of wastewater treatment and provides valuable insights into prospective avenues for further research.

Harmonizing Thickness and Permeability in Bone Tissue Engineering: A Novel Silk Fibroin Membrane Inspired by Spider Silk Dynamics

Guided bone regeneration gathers significant interest in the realm of bone tissue engineering; however, the interplay between membrane thickness and permeability continues to pose a challenge that can be addressed by the water-collecting mechanism of spider silk, where water droplets efficiently move from smooth filaments to rough conical nodules. Inspired by the natural design of spider silk, an innovative silk fibroin membrane is developed featuring directional fluid transportation via harmoniously integrating a smooth, dense layer with a rough, loose layer; conical microchannels are engineered in the smooth and compact layer. Consequently, double-layered membranes with cone-shaped microporous passageways (CSMP-DSF membrane) are designed for in situ bone repair. Through extensive in vitro testing, it is noted that the CSMP-DSF membrane guides liquid flow from the compact layer's surface to the loose layer, enabling rapid diffusion. Remarkably, the CSMP-DSF membrane demonstrates superior mechanical properties and resistance to bacterial adhesion. When applied in vivo, the CSMP-DSF membrane achieves results on par with the commercial Bio-Gide collagen membranes. This innovative integration of a cross-thickness wetting gradient structure offers a novel solution, harmonizing the often-conflicting requirements of material transport, mechanical strength, and barrier effectiveness, while also addressing issues related to tissue engineering scaffold perfusion.

Hierarchically patterned protein scaffolds with nano-fibrillar and micro-lamellar structures modulate neural stem cell homing and promote neuronal differentiation

Biophysical factors are essential in cell survival and behaviors, but constructing a suitable 3D microenvironment for the recruitment of stem cells and exerting their physiological functions remain a daunting challenge. Here, we present a novel silk fibroin (SF)-based fabrication strategy to develop hierarchical microchannel scaffolds for biomimetic nerve microenvironments in vitro. We first modulated the formation of SF nanofibers (SFNFs) that mimic the nanostructures of the native extracellular matrix (ECM) by using graphene oxide (GO) nanosheets as templates. Then, SFNF-GO systems were shaped into 3D porous scaffolds with aligned micro-lamellar structures by freeze-casting. The interconnected microchannels successfully induced cell infiltration and migration to the SFNF-GO scaffolds' interior. Meanwhile, the nano-fibrillar structures and the GO component significantly induced neural stem cells (NSCs) to differentiate into neurons within a short timeframe of 14 d. Importantly, these 3D hierarchical scaffolds induced a mild inflammatory response, extensive cell recruitment, and effective stimulation of NSC neuronal differentiation when implanted in vivo. Therefore, these SFNF-GO lamellar scaffolds with distinctive nano-/micro-topographies hold promise in the fields of nerve injury repair and regenerative medicine.

Engineering Structural Janus MXene-nanofibrils Aerogels for Season-Adaptive Radiative Thermal Regulation

Aerogels have provided a significant platform for passive radiation-enabled thermal regulation, arousing extensive interest due to their capabilities of radiative cooling or heating. However, there still remains challenge of developing functionally integrated aerogels for sustainable thermal regulation in both hot and cold environment. Here, Janus structured MXene-nanofibrils aerogel (JMNA) is rationally designed via a facile and efficient way. The achieved aerogel presents the characteristic of high porosity (≈98.2%), good mechanical strength (tensile stress of ≈2 MPa, compressive stress of ≈115 kPa), and macroscopic shaping property. Based on the asymmetric structure, the JMNA with switchable functional layers can alternatively enable passive radiative heating and cooling in winter and summer, respectively. As a proof of concept, JMNA can function as a switchable thermal-regulated roof to effectively enable the inner house model to maintain >25 °C in winter and <30 °C in hot summer. This design of Janus structured aerogels with compatible and expandable capabilities is promising to widely benefit the low-energy thermal regulation in changeable climate.

Novel Biomaterial-Binding/Osteogenic Bi-Functional Peptide Binds to Silk Fibroin Membranes to Effectively Induce Osteogenesis In Vitro and In Vivo

Peptides can introduce new functions to biomaterials but their immobilization usually relies on inefficient physical adsorption or tedious chemical conjugation. Using the Bombyx mori silk fibroin (SF) membrane (SFm) as a model biomaterial, here, we demonstrate a universal strategy for discovering new peptides that can "stick" to a biomaterial to functionalize it. Specifically, two peptide motifs, one screened by phage display biopanning for binding to the biomaterial (i.e., SF) and another derived from an osteogenic growth factor (i.e., bone morphogenetic protein-2), are fused into a new chimeric peptide that can bind to SFm for more efficient osteogenesis. Theoretical simulations and experimental assays confirm that the chimeric peptide binds to SF with high affinity, facilely achieving its immobilization onto SFm. The peptide enables SFm to effectively induce osteogenic differentiation of human mesenchymal stem cells (MSCs) even without other osteogenic inducers and efficiently stimulate bone regeneration in a subcutaneous rat model in 8 weeks, even without MSC seeding, while not causing inflammatory responses. Since biomaterial-binding peptides can be readily screened using phage display and functional peptides can be generated from growth factors, our work suggests a universal strategy for combining them to seek new peptides for binding and functionalizing biomaterials.

When 2D nanomaterials meet biomolecules: design strategies and hybrid nanostructures for bone tissue engineering

2D nanomaterials show great potential in biomedical applications due to their unique physical and chemical surface properties. This review includes typical 2D nanomaterials used in bone tissue engineering (BTE), such as graphene oxide, hexagonal boron nitride, molybdenum disulfide, black phosphorus, and MXenes. Moreover, the construction methods of BTE materials with 2D nanosheets are analyzed. Before designing a BTE material, it is essential to understand the relationship between the material structure and properties. Notably, 2D nanomaterials can be hybridized with biomaterials, such as polypeptides, proteins, and polysaccharides, to improve biocompatibility and host responses. The effects of the surface properties and size of 2D nanomaterials on cellular behavior, gene expression, antibacterial properties, and cytotoxicity in BTE applications are also discussed. This work provides new design ideas and directions for constructing 2D nanomaterial-based BTE scaffolds.

Efficient Tumor Immunotherapy through a Single Injection of Injectable Antigen/Adjuvant-Loaded Macroporous Silk Fibroin Microspheres

Synthetic or natural materials have been used as vaccines in cancer immunotherapy. However, using them as vaccines necessitates multiple injections or surgical implantations. To tackle such daunting challenges, we develop an injectable macroporous Bombyx mori (B. mori) silk fibroin (SF) microsphere loaded with antigens and immune adjuvants to suppress established tumors with only a single injection. SF microspheres can serve as a scaffold by injection and avoid surgical injury as seen in traditional scaffold vaccines. The macroporous structure of the vaccine facilitates the recruitment of immune cells and promotes the activation of dendritic cells (DCs), resulting in a favorable immune microenvironment that further induces strong humoral and cellular immunity. We have also modified the vaccine into a booster version by simply allowing the antigens to be adsorbed onto the SF microspheres. The booster vaccine highly efficiently suppresses tumor growth by improving the cytotoxic T lymphocyte (CTL) response. In general, these results demonstrate that the macroporous SF microspheres can serve as a facile platform for tumor vaccine therapy in the future. Since the SF microspheres are also potential scaffolds for tissue regeneration, their use as a vaccine platform will enable their applications in eradicating tumors while regenerating healthy tissue to heal the tumor-site cavity.

Tissue engineered bone via templated hBMSCs mineralization and its application for bone repairing

To develop bone implants, a novel tissue-engineered bone was constructed via templated human bone mesenchymal stem cells (hBMSCs) mineralization. Firstly, an osteoid-like template (Os-template) with aligned collagen fibers was prepared and followed by seeding hBMSCs to mimic the process of bone formation. After being cultured over weeks, the cells produced collagen fibers in an orderly aligned osteomorphic fashion. Further, a novel tissue-engineered bone with mineralized collagen fiber (mOs-ECM) was subsequently achieved after cell mineralization, showing a high degree of osteomimicry in terms of both composition and structure. When applied to the rat cranial bone defect model, the mOs-ECM significantly promoted the new bone formation and fused with the host bone. The study indicated that microscopic cell mineralization could be guided by artificially designed templates and successfully fabricated a macroscopic implant with a pronounced effect on bone repairing.

3D printing monetite-coated Ti-6Al-4V surface with osteoimmunomodulatory function to enhance osteogenesis

Titanium and its alloys are widely used in orthopedic implant surgery due to their good mechanical properties and biocompatibility. Recent studies have shown that the healing process of fractures involve not only the calcification of osteoblasts but also the regulation of the immune system. The functionalization of titanium surface coatings is one of the most important methods for solving implant failures. In this study, monetite (CaHPO₄) was coated on the Ti-6Al-4V porous scaffold by hydrothermal method. SEM, XRD and EDS were used to characterize the morphology, phase constitutes, elemental content of the coating, respectively. The results indicated that a well bonded and uniformly distributed monetite coating obtained, and the degradation performance and Ca²⁺ release of the surface coating were also studied. In terms of biology, live/dead staining and CCK8 methods showed the coating had good biocompatibility and BMSCs can adhere and proliferate on the surface. Flow cytometry and ELISA indicated that the surface monetite-coating had good anti-inflammatory properties. Through RNA-seq analysis, it was shown in KEGG that the osteoclast-related pathway was inhibited. In vitro, monetite induced osteogenic gene expression in BMSCs and inhibited the activity of osteoclasts. In vivo experiments showed that the monetite-coating increased bone formation. In summary, monetite-coating can effectively promote the osteogenesis in BMSCs, which may be achieved through bone immune regulation.

Binding Peptide-Promoted Biofunctionalization of Graphene Paper with Hydroxyapatite for Stimulating Osteogenic Differentiation of Mesenchymal Stem Cells

Graphene paper (GP), a macroscopic self-supporting material, has exceptional flexibility and preserves the excellent physical and chemical properties of graphene nanomaterials. But its applications in regenerative medicine remain to be further explored. Here, we biologically functionalized GP with hydroxyapatite (HA) nanorods by the use of GP-binding peptides as an affinity linker. This strategy solved two daunting challenges for regenerative medicine applications of GP: the lack of good hydrophilicity for supporting cell growth and the difficulty in forming composites by binding with nanobiomaterials. Briefly, we first screened a high-affinity GP-binding peptide (TWWNPRLVYFDY) by the phage display technique. Then we chemically conjugated the GP-binding peptide to the synthetic HA nanorods. The GP-binding peptide on the resultant HA nanorods enabled them to be bound and assembled onto the GP substrate with high affinity, forming a GP-peptide-HA composite with significantly improved hydrophilicity of GP. The composite promoted the attachment and proliferation of mesenchymal stem cells (MSCs), demonstrating its outstanding biocompatibility. Due to the unique compositions of the composite, it was also found to induce osteogenic differentiation of MSCs in vitro in the absence of other inducers in the medium, by verifying the expression of the osteogenic markers including collagen-1, bone morphogenetic proteins 2, runx-related transcription factor 2, osteocalcin, and alkaline phosphatase. Our work suggests that the GP-binding peptide can be used to link inorganic nanoparticles onto GP to facilitate the biomedical applications of GP.

Colonization versus encapsulation in cell-laden materials design: porosity and process biocompatibility determine cellularization pathways

Seeding materials with living cells has been-and still is-one of the most promising approaches to reproduce the complexity and the functionality of living matter. The strategies to associate living cells with materials are limited to cell encapsulation and colonization, however, the requirements for these two approaches have been seldom discussed systematically. Here we propose a simple two-dimensional map based on materials' pore size and the cytocompatibility of their fabrication process to draw, for the first time, a guide to building cellularized materials. We believe this approach may serve as a straightforward guideline to design new, more relevant materials, able to seize the complexity and the function of biological materials. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 1)'.

Preservation of biomaterials and cells by freeze-drying: Change of paradigm

Freeze-drying is the most widespread method to preserve protein drugs and vaccines in a dry form facilitating their storage and transportation without the laborious and expensive cold chain. Extending this method for the preservation of natural biomaterials and cells in a dry form would provide similar benefits, but most results in the domain are still below expectations. In this review, rather than consider freeze-drying as a traditional black box we "break it" through a detailed process thinking approach. We discuss freeze-drying from process thinking aspects, introduce the chemical, physical, and mechanical environments important in this process, and present advanced biophotonic process analytical technology. In the end, we review the state of the art in the freeze-drying of the biomaterials, extracellular vesicles, and cells. We suggest that the rational design of the experiment and implementation of advanced biophotonic tools are required to successfully preserve the natural biomaterials and cells by freeze-drying. We discuss this change of paradigm with existing literature and elaborate on our perspective based on our new unpublished results.

Biomineralization Directed by Prenucleated Calcium and Phosphorus Nanoclusters Improving Mechanical Properties and Osteogenic Potential of Antheraea pernyi Silk Fibroin-Based Artificial Periosteum

The use of biomacromolecules as templates to control the nucleation and growth of hydroxyapatite crystals to prepare bioactive materials is a valuable approach in bone tissue engineering. Here, an artificial periosteum is prepared by biomineralizing Antheraea pernyi fibroin (AF) membrane with prenucleated nanoclusters, which can promote the osteogenic differentiation of mesenchymal stem cells (MSCs) and induce the formation of bone matrix protein in vivo. To achieve this, a biologically inspired prenucleated calcium and phosphorus nanocluster mineralization system is designed to nucleate and generate hydroxyapatite crystals on the surface of the AF membrane. This biomineralization process provides AF membranes with improved elastic modulus and tensile strength. Subsequently, cell viability assay, hemolysis test, and H&E staining show that the mineralized AF (MAF) membranes has good cytocompatibility, hemocompatibility, and histocompatibility in vitro and in vivo. Additionally, the MAF membranes significantly promote osteogenic differentiation of MSCs in the absence of osteogenic inducer in vitro. Experiments in vivo demonstrate that bone-related matrix proteins are highly expressed in MAF groups with or without MSCs seeded. Therefore, the use of bioinspired prenucleated nanoclusters to prepare artificial periosteum based on biomineralized AF membrane is a promising strategy in the field of bone tissue engineering.

Recent advances in ice templating: from biomimetic composites to cell culture scaffolds and tissue engineering

We review the evolution of ice-templating process from initial inorganic materials to recent developments in shaping increasingly labile biological matter.

Air-plasma treatment promotes bone-like nano-hydroxylapatite formation on protein films for enhanced in vivo osteogenesis

Introducing hydroxylapatite (HAp) into biomolecular materials is a promising approach to improve their bone regenerative capability. Thus a facile method needs to be developed to achieve this goal. Here we show that a simple air-plasma treatment of silk fibroin (SF) films for 5 min induced the formation of bone-like plate-shaped nano-HAp (nHAp) on their surface and the resultant material efficiently enhanced in vivo osteogenesis. The air-plasma-treated SF films (termed A-SF) presented surface nano-pillars and enhanced hydrophilicity compared to the pristine SF films (termed SF), making the A-SF and SF films induce the formation of plate-shaped/more-crystalline and needle-like/less-crystalline nHAp, respectively. The mineralized A-SF and SF films (termed A-SF-nHAp and SF-nHAp, respectively) and their non-mineralized counterparts were seeded with rat mesenchymal stem cells and subcutaneously implanted into the rat models. The A-SF-nHAp and A-SF films exhibited more efficient bone formation than the SF-nHAp and SF films in 4 weeks due to their unique nanotopography, with the A-SF-nHAp films being more efficient than the A-SF films. This work shows that a combination of the air-plasma treatment and the subsequent nHAp mineralization most efficiently promotes bone formation. Our plasma-based method is an attractive approach to enhance the bone regenerative capacity of protein-based biomaterials.

Graphene Oxide and Lysozyme Ultrathin Films with Strong Antibacterial and Enhanced Osteogenesis

There is a great demand worldwide for bone-related implant materials. The drawbacks of chronic infections and poor bone healing of current implant materials have limited their clinical applications. Functionalizing the implant surfaces with antibacterial and osteogenic films on implant materials provides new opportunities for fabricating novel implant materials. In the present study, an ultrathin (GO/Lys)₈ film of several tens of nanometers was fabricated using a layer-by-layer (LBL) technique with alternative deposition of graphene oxide (GO) and lysozyme (Lys). The deposition of the (GO/Lys) _n film exhibited a successive growth as supported by ellipsometry, UV-vis, and Fourier transform infrared data, and the physical properties (morphology, roughness, and stiffness) of this film were characterized with an atomic force microscope. The ultrathin films exhibited a great effect on bacterium sterilization of Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli and enhanced osteogenic differentiation efficiency, showing the potential application in bone implant coatings. We believe that this LBL assembling strategy will pave the way for fabricating dual-functional surfaces and guide the design of the implanted surfaces in the future.

Protein-Induced Gold Nanoparticle Assembly for Improving the Photothermal Effect in Cancer Therapy

Gold nanoparticles (AuNPs) are promising photothermal agents for cancer therapy. However, the absorption of spherical AuNPs is weak in the desired tissue-penetrating near-infrared (NIR) window, resulting in low photothermal efficiency within this window. Here, we show that fibrous nanostructures assembled from spherical AuNPs since the templating effect of silk fibroin (SF) could red-shift the optical absorption to NIR and thus present improved photothermal efficiency within the NIR window. Specifically, negatively charged SF, a protein derived from Bombyx mori, was assembled into nanofibers due to the interaction with the positively charged AuNPs and concomitantly templated the AuNPs into fibrous nanostructures. The resultant AuNPs/SF nanofibers presented higher NIR light absorption at 808 nm and higher photothermal efficiency under 808 nm NIR irradiation than nonassembled AuNPs. In vitro and in vivo analyses proved that AuNPs/SF nanofibers could efficiently kill breast cancer cells and destruct breast cancer tumor tissues under one-time NIR irradiation for 6 min by photothermal therapy (PTT) but nonassembled AuNPs could not. This work suggests that the self-assembled AuNPs/SF nanofibers are effective photosensitizers for PTT, and biotemplated assembly of photothermal agents into highly ordered nanostructures is a promising approach to increasing the PTT efficiency.

Square prism micropillars on poly(methyl methacrylate) surfaces modulate the morphology and differentiation of human dental pulp mesenchymal stem cells

Use of soluble factors is the most common strategy to induce osteogenic differentiation of mesenchymal stem cells (MSCs) in vitro, but it may raise potential side effects in vivo. The topographies of the substrate surfaces affect cell behavior, and this could be a promising approach to guide stem cell differentiation. Micropillars have been reported to modulate cellular and subcellular shape, and it is particularly interesting to investigate whether these changes in cell morphology can modulate gene expression and lineage commitment without chemical induction. In this study, poly(methyl methacrylate) (PMMA) films were decorated with square prism micropillars with different lateral dimensions (4, 8 and 16 μm), and the surface wettability of the substrates was altered by oxygen plasma treatment. Both, pattern dimensions and hydrophilicity, were found to affect the attachment, proliferation, and most importantly, gene expression of human dental pulp mesenchymal stem cells (DPSCs). Decreasing the pillar width and interpillar spacing of the square prism pillars enhanced cell attachment, cell elongation, and deformation of nuclei, but reduced early proliferation rate. Surfaces with 4 or 8 μm wide pillars/gaps upregulated the expression of early bone-marker genes and mineralization over 28 days of culture. Exposure to oxygen plasma increased wettability and promoted cell attachment and proliferation but delayed osteogenesis. Our findings showed that surface topography and chemistry are very useful tools in controlling cell behavior on substrates and they can also help create better implants. The most important finding is that hydrophobic micropillars on polymeric substrate surfaces can be exploited in inducing osteogenic differentiation of MSCs without any differentiation supplements.

Integrating 3D Printing and Biomimetic Mineralization for Personalized Enhanced Osteogenesis, Angiogenesis, and Osteointegration

Titanium (Ti) alloy implants can repair bone defects at load-bearing sites. However, they mechanically mismatch with the natural bone and lack customized adaption with the irregularly major-sized load-bearing bone defects, resulting in the failure of implant fixation. Mineralized collagen (MC), a building block in bone, can induce angiogenesis and osteogenesis, and 3D printing technology can be employed to prepare scaffolds with an overall shape customized to the bone defect. Hence, we induced the formation of MC, made of hydroxyapatite (HAp) nanocrystals and collagen fibers, in 3D-printed porous Ti₆Al₄V (PT) scaffolds through in situ biomimetic mineralization. The resultant MC/PT scaffolds exhibited a bone-like Young's modulus and were customized to the anatomical contour of actual bone defects of rabbit model. We found that the biocompatibility and osteogenic differentiation are best when the mass ratio between HAp nanocrystals and collagen fibers is 1 in MC. We then implanted the MC/PT scaffolds into the customized radius defect rabbit model and found that the MC/PT scaffolds significantly improved the vascularized bone tissue formation and integration between new bone and the implants. Therefore, a combination of 3D printing and biomimetic mineralization could lead to customized 3D PT scaffolds for enhanced angiogenesis, osteogenesis, and osteointegration. Such scaffolds represent novel patient-specific implants for precisely repairing irregular major-sized load-bearing bone defects.

Protein Nanofibril Assemblies Templated by Graphene Oxide Nanosheets Accelerate Early Cell Adhesion and Induce Osteogenic Differentiation of Human Mesenchymal Stem Cells

Bombyx mori silk fibroin (SF) is a promising natural biocompatible protein. However, its interaction with graphene oxide (GO) has never been studied and the resultant SF/GO matrix has not been used to direct stem cell fate. Herein, we found out that mixing SF molecules and GO nanosheets in an aqueous solution can trigger the assembly of SF nanoparticles into oriented nanofibrils due to the guidance of GO nanosheets, forming SF/GO films with unique nanotopographies and improved modulus upon the removal of the solvent. When GO mass percentage in the SF/GO films is 2 and 10%, the SF assemblies are necklace-like nanofibrils (assembled from loosely linked SF nanoparticles) and solid nanofibrils (assembled from densely linked SF nanoparticles) in the resultant films, termed SG2 and SG10, respectively. GO nanosheets guided the SF assembly into nanofibrils by triggering the structural change of SF molecules from random coils to β-sheets, as confirmed by Fourier transform infrared spectroscopy and circular dichroism measurements. Furthermore, oxidative groups in the GO nanosheets were reduced by the reducing groups in SF during the nanofibril formation according to X-ray photoelectron spectroscopy and Raman spectroscopy. The reduction of the oxidative groups in GO by SF was further verified by the good cell viability on the SF/GO films. The unique nanotopographies of the SF/GO films were found to accelerate the early cell adhesion and induce the osteogenic differentiation of human mesenchymal stem cells (MSCs) even in the absence of additional inducers in the medium. More importantly, SG10 presents a stronger capability in promoting early MSC adhesion by promoting F-actin assembly, increasing cell spreading area, and inducing the osteogenic differentiation of the MSCs by the unique SF/GO nanofibrous matrix. To the best of our knowledge, it is the first report that the SF/GO substrates can induce the osteogenic differentiation of MSCs in the absence of osteogenic differentiation medium. Therefore, SF/GO composite materials would have a potential application in the field of bone tissue engineering.

Fabrication, characterization and biocompatibility of collagen/oxidized regenerated cellulose-Ca composite scaffold for carrying Schwann cells

Schwann cell (SC) is the primary structural and functional part of the peripheral nervous system, and it plays a key role in the repair and regeneration of peripheral nerve. In order to develop a suitable scaffold for SC nerve tissue engineering, three kinds of scaffolds, including pristine collagen, pure oxidized regenerated cellulose-Ca (ORCCa) and collagen/ORC-Ca composite scaffolds, have been fabricated for carrying SC in this study. SC is then seeded on the scaffolds to form SC-scaffold nerve tissue engineering composites and evaluate their biocompatibility. The chemical and physical structure of the scaffolds are investigated by FTIR, NMR and SEM. The wettability of the collagen/ORC-Ca composite scaffold is close to that of pristine collagen, and the tensile strength of the composite scaffold (0.58 MPa) is better than that of pristine collagen (0.36 MPa). Cytotoxicity, cell proliferation, cell adhesion and western blotting assays are conducted to evaluate the biocompatibility and properties of different scaffolds. The results show that the three scaffolds exhibit no toxicity, and the proliferation rate of SC on the collagen/ORC-Ca composite scaffold is significantly higher than that of the other scaffolds (p < 0.05). The number of the adhesion cells on the composite scaffold (244.67 ± 13.02) is much more than that in the pure ORC-Ca group (p < 0.01). Furthermore, the expression of N-Cadheri and PMP22 proteins in the collagen/ORC-Ca composite scaffold is significantly superior to the other two scaffolds (both p < 0.01). Therefore, it could be concluded that the collagen/ORC-Ca composite is a promising candidate as a scaffold for carrying SC to form nerve tissue engineering composites in order to assist the peripheral nervous in the repair and regeneration.

Functional hepatocyte clusters on bioactive blend silk matrices towards generating bioartificial liver constructs

The creation of in vitro functional hepatic tissue simulating micro-environmental niche of native liver is a keen area of research due to its demand in bioartificial liver (BAL) and cell-based tissue engineering. Here, we investigated the potential of novel blend (BA) silk scaffold fabricated by blending mulberry (Bombyx mori, BM) silk fibroin with cell adhesion motif (RGD) rich non-mulberry (Antheraea assamensis, AA) silk fibroin, in generating a functional liver construct. Three-dimensional (3D) porous silk scaffolds (BM, AA and BA) were physico-chemically characterized and functionally evaluated using human hepatocarcinoma cells (HepG2) and primary neonatal rat hepatocytes. The growth and distribution of hepatocytes within the scaffolds were tracked by FESEM, alamar blue proliferation assay and live/dead staining. Hemocompatible BA scaffolds supported the formation of high density hepatocyte clusters, facilitating cell-matrix and cell-cell interactions. Blend scaffolds evinced enhanced liver-specific functions of cultured hepatocytes in terms of albumin synthesis, urea synthesis and cytochrome P450 enzyme activity over 21 days. Subcutaneous implantation of scaffolds demonstrated minimal macrophage infiltration in blend scaffolds. These findings substantiate that the integral property of blend (BA) scaffold offers a befitting environment by influencing spheroidal growth of hepatocytes with enhanced biological activity. Collectively, the present study provides a new 3D bio-matrix niche for growing functional liver cells that would have future prospects in BAL as well as regenerative medicine.

STATEMENT OF SIGNIFICANCE

An end stage liver disease called cirrhosis perturbs the self-healing ability and physiological functions of liver. Due to the scarcity of healthy donors, a functional in vitro hepatic construct retaining the liver-specific functions is in great demand for its prospects in bioartificial liver (BAL) and cell-based tissue engineering. Physicochemical attributes of a matrix influence the behavior of cultured hepatocytes in terms of attachment, morphology and functionality. Mulberry and non-mulberry silk fibroin presents unique amino acid sequence with difference in hydrophobicity and crystallinity. Considering this, the present study focuses on the development of a suitable three-dimensional (3D) bioactive matrix incorporating both mulberry silk fibroin and cell adhesion motif (RGD) rich non-mulberry silk fibroin. Porous silk blend scaffolds facilitated the formation of hepatocyte clusters with enhanced liver-specific functions emphasizing both cell-cell and cell-matrix interactions. Hemocompatibility and integral property of blend scaffolds offers a biological niche for seeding functional liver cells that would have future prospects in biohybrid devices.

Silk fibroin scavenges hydroxyl radicals produced from a long-term stored water-soluble fullerene system

In this study, we find that silk fibroin as an antioxidant is capable of scavenging OH˙ and accelerating the degradation of water-soluble fullerene, which provides further insight into the application of WSF in intratracheal instillation and inhalation.

Physical stimulation and scaffold composition efficiently support osteogenic differentiation of mesenchymal stem cells

BACKGROUND

Despite significant achievements in the field of tissue engineering, simplification and improvement of the existing protocols are of great importance. The use of complex differentiation media, due to the presence of multiple factors, may have some undesired effects on cell health and functions. Thus, minimizing the number of involved factors, while maintaining the differentiation efficiency, provides less costly and controllable conditions. Adipose-derived Mesenchymal stem cells (ASCs), the adult stem cells present in adipose tissue, can be a suitable source of stem cells due to abundant and ease of access. The aim of this study is to optimize the osteogenic differentiation of ASCs by chemical composition of scaffold, in the first step, and then by electromagnetic treatments.

METHODS

ASCs were cultured on PVA/PES scaffold and tissue culture polystyrene surfaces (TCPS) and osteogenic differentiation was performed with either osteogenic medium, or electromagnetic field or both. The impact of each treatment on ASCs growth and proliferation was measured by MTT assay. Changes in gene expression levels of osteogenic-specific markers including ALP and RUNX2 were determined by Real Time PCR. Furthermore, alkaline phosphatase activity and calcium deposition were measured.

RESULTS

The MTT assay showed the significant effects on cell growth and respiration in scaffold-seeded ASCs treated with electromagnetic field, compared to control TCPS plate. Also, the electromagnetic treatment, increased alkaline phosphatase activity and calcium deposition. Finally, Real Time PCR showed higher expression of ALP and RUNX2 genes in electromagnetic field groups compared to control groups.

CONCLUSION

It can be concluded that PVA/PES scaffold used in this study improved the osteogenic capacity of ASCs. Moreover, the osteogenic potential of ASCs seeded on PVA/PES scaffold could be augmented by electromagnetic field without any chemical stimulation.