Hydrogen bonded multilayer films based on poly(2-oxazoline)s and tannic acid

Echogenic Gold Nanorod Incorporated Hybrid Poly(2-oxazoline) Nanocapsules for Real-Time Ultrasound/Fluorescent Imaging and Targeted Cancer Theranostics

In recent years, various nanocarrier systems have been explored to enhance the targeting of cancer cells by improving the ligand-receptor interactions between the nanocarrier and cancer cells for selective cancer cell imaging and targeted delivery of anticancer drugs. Herein, we report multifunctional hydrogen-bonded multilayer nanocapsules functionalized with both folic acid-derived quantum dots (FAQDs) and gold nanorods (AuNRs) for targeted cancer therapy and cancer cell imaging using fluorescence microscopy and medical-range ultrasound imaging systems. The encapsulation efficiency of nanocapsules was found to be 49% for 5-fluorouracil (5-FU). The release percentage reached a plateau at 37% after 1 h at pH 7.4 and increased to 57% after 3 h when the release pH was decreased to pH 5.5 (i.e., the pH of the tumor environment). Under ultrasound irradiation, the release was significantly accelerated, with a total release of 52% and 68% after only 6 min at pH 7.4 and pH 5.5, respectively. While the sonoporation process plays an important role in anticancer activity experiments under ultrasound exposure by generating temporary pores, the targeting ability of FAQDs brings the capsules closer to the cell membrane and improves the cellular uptake of the released drug, thereby increasing local drug concentration. In vitro cytotoxicity experiments with HCT-116 and HEp-2 cells demonstrated anticancer activities of 96% and 98%, respectively. The nanocapsules showed enhanced ultrasound scattering signal intensity and bright spots under ultrasound exposure, most likely caused by high scattering ability and internal reflections of preloaded AuNRs in the interior structure of the nanocapsules. Hence, the demonstrated nanocapsule system not only has the potential to be used as an integrated system for early- stage detection and treatment of cancer cells but also has the ability for live tracking and imaging of cancer cells while undergoing treatment with chemotherapy and radiation therapy.

Amphiphilic sodium alginate-polylysine hydrogel with high antibacterial efficiency in a wide pH range

Bacterial infection is a major pathological factor leading to persistent wounds. With the aging of population, wound infection has gradually become a global health-issue. The wound site environment is complicated, and the pH changes dynamically during healing. Therefore, there is an urgent need for new antibacterial materials that can adapt to a wide pH range. To achieve this goal, we developed a thymol-oligomeric tannic acid/amphiphilic sodium alginate-polylysine hydrogel film, which exhibited excellent antibacterial efficacy in the pH range from 4 to 9, achieving the highest achievable 99.993 % (4.2 log units) and 99.62 % (2.4 log units) against Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli, respectively. The hydrogel films exhibited excellent cytocompatibility, suggesting that the materials are promising as a novel wound healing material without the concern of biosafety.

Hydrogen-Bonded Complexes of Star Polymers

The effect of molecular architecture, star versus linear, poly(ethylene oxide) (PEO) on the formation of hydrogen-bonded complexes with linear poly(methacrylic acid) (PMAA) is investigated experimentally and rationalized theoretically. Isothermal titration calorimetry reveals that at pH 2.5 interpolymer complexes (IPCs) of PMMA with a 6-arm star PEO (sPEO) contains ≈50% more polyacid than IPCs formed with linear PEO (lPEO). While the enthalpy of IPC formation is positive in both cases, its magnitude is ≈50% larger for sPEO/PMAA complexes that exhibit a lower dissociation constant than lPEO/polyacid complexes. These results are rationalized based on a higher localized density of hydrogen bonds formed between sPEO and the polyacid which prevents penetration of star molecules into PMAA coils. Accordingly, Fourier transform infrared results indicate approximately twofold excess of self-associated >COOH units over intermolecularly bonded >COOH units in sPEO-containing complexes. The excess of PMAA chains in IPCs and the percentage of self-associated carboxylic groups in sPEO/PMAA complexes both increase with polyacid molecular weight. Other findings, including a positive entropy, hysteresis in composition at strongly acidic pH, and progressive equilibration of IPCs at increased pH are consistent with the critical role of charge and release of water molecules in the formation of sPEO/PMAA and lPEO/PMAA complexes.

Polyphenol scaffolds in tissue engineering

Polyphenols are a class of ubiquitous compounds distributed in nature, with fascinating inherent biocompatible, bioadhesive, antioxidant, and antibacterial properties. The unique polyphenolic structures based on catechol or pyrogallol moieties allow for strong non-covalent interactions (e.g., multiple hydrogen bonding, electrostatic, and cation-π interactions) as well as covalent interactions (e.g., Michael addition/Schiff-base reaction, radical coupling reaction, and dynamic coordination interactions with boronate or metal ions). This review article provides an overview of the polyphenol-based scaffolds including the hydrogels, films, and nanofibers that have emerged from chemical and functional signatures during the past years. A full description of the structure-function relationships in terms of their utilization in wound healing, bone regeneration, and electroactive tissue engineering is also carefully discussed, which may pave the path towards the rational design and facile preparation of next-generation polyphenol scaffolds for tissue engineering applications.

Medical Applications Based on Supramolecular Self-Assembled Materials From Tannic Acid

Polyphenol, characterized by various phenolic rings in the chemical structure and an abundance in nature, can be extracted from vegetables, grains, chocolates, fruits, tea, legumes, and seeds, among other sources. Tannic acid (TA), a classical polyphenol with a specific chemical structure, has been widely used in biomedicine because of its outstanding biocompatibility and antibacterial and antioxidant properties. TA has tunable interactions with various materials that are widely distributed in the body, such as proteins, polysaccharides, and glycoproteins, through multimodes including hydrogen bonding, hydrophobic interactions, and charge interactions, assisting TA as important building blocks in the supramolecular self-assembled materials. This review summarizes the recent immense progress in supramolecular self-assembled materials using TA as building blocks to generate different materials such as hydrogels, nanoparticles/microparticles, hollow capsules, and coating films, with enormous potential medical applications including drug delivery, tumor diagnosis and treatment, bone tissue engineering, biofunctional membrane material, and the treatment of certain diseases. Furthermore, we discuss the challenges and developmental prospects of supramolecular self-assembly nanomaterials based on TA.

Hydrogen-Bonded Films for Zero-Order Release of Leuprolide

Leuprolide has been widely used in androgen deprivation therapy for the treatment of advanced prostate cancer, but its use is still limited due to its short half-life. Herein, hydrogen-bonded layer-by-layer films are fabricated from PEGylated leuprolide (PEG-LEU) and tannic acid (TA). Because of its dynamic nature, the film disintegrates gradually in water and releases PEG-LEU and TA. The in vitro release profile indicated perfect zero-order kinetics, which is explained by the unique release mechanism. When implanted subcutaneously in male rats, the films maintain a constant serum drug level. For a 60-bilayer film, the serum drug level is maintained constant for ≈24 days. No initial burst release is observed, suggesting that the in vivo release also follows zero-order kinetics. Initially, an increase in the level of serum testosterone is induced by the released drug, followed by testosterone suppression to a constant level below the castrate level, which could be maintained as long as a constant serum drug level is maintained. Since the new drug carriers avoid an initial burst release of the drug and maintain a constant serum drug level and hence a constant serum testosterone level below the castrate level, these carriers are highly promising for androgen deprivation therapy.

Multilayer capsules made of weak polyelectrolytes: a review on the preparation, functionalization and applications in drug delivery

Multilayer capsules have been of great interest for scientists and medical communities in multidisciplinary fields of research, such as drug delivery, sensing, biomedicine, theranostics and gene therapy. The most essential attributes of a drug delivery system are considered to be multi-functionality and stimuli responsiveness against a range of external and internal stimuli. Apart from the highly explored strong polyelectrolytes, weak polyelectrolytes offer great versatility with a highly controllable architecture, unique stimuli responsiveness and easy tuning of the properties for intracellular delivery of cargo. This review describes the progress in the preparation, functionalization and applications of capsules made of weak polyelectrolytes or their combination with biopolymers. The selection of a sacrificial template for capsule formation, the driving forces involved, the encapsulation of a variety of cargo and release based on different internal and external stimuli have also been addressed. We describe recent perspectives and obstacles of weak polyelectrolyte/biopolymer systems in applications such as therapeutics, biosensing, bioimaging, bioreactors, vaccination, tissue engineering and gene delivery. This review gives an emerging outlook on the advantages and unique responsiveness of weak polyelectrolyte based systems that can enable their widespread use in potential applications.

Hydrogen-Bonded Multilayer Thin Films and Capsules Based on Poly(2-n-propyl-2-oxazoline) and Tannic Acid: Investigation on Intermolecular Forces, Stability, and Permeability

In recent years, hydrogen-bonded multilayer thin films and capsules based on neutral and nontoxic building blocks have been receiving interest for the design of stimuli-responsive drug delivery systems and for the preparation of thin-film coatings. Capsule systems made of tannic acid (TA), a natural polyphenol, as a hydrogen bonding donor and poly(2-n-propyl-2-oxazoline) (PnPropOx), a polymer with lower critical solution temperature around 25 °C, as a hydrogen bonding acceptor are advantageous over other conventional hydrogen-bonded systems because of their high stability in physiological pH range, biocompatibility, good renal clearance, stealth behavior, and stimuli responsiveness for temperature and pH. In this work, investigations on the interactive forces in TA/PnPropOx capsule formation, film thickness, stability, and permeability are reported. The multilayer thin films were assembled on quartz substrates, and the layer-by-layer film growth was investigated by UV-vis spectroscopy, atomic force microscopy, and profilometry. Hollow capsules were fabricated by sequential coating of TA and PnPropOx onto CaCO₃ colloidal particles, followed by template dissolution with a 0.2 M ethylenediaminetetraacetic acid solution. The obtained capsules and multilayer thin films were found to be stable over a wide pH range of 2-9. It is found that both hydrogen bonding and hydrophobic interactions are responsible for the enhanced stability of the capsules at higher pH range. Swelling followed by dissolution of the capsules was observed at a pH value lower than 2, while the capsules undergo shrinking at a pH value higher than 8 and finally transform into a particle-like morphology before dissolution. The TA/PnPropOx capsules reported here could be used as a temperature-responsive drug delivery system in controlled drug delivery applications.

Multifunctional Tannic Acid (TA) and Lysozyme (Lys) Films Built Layer by Layer for Potential Application on Implant Coating

A multifunctional (TA/Lys)_n film, featuring good antioxidant property, fast cell attachment at the initial stage, enhanced osteogenesis, and broad-spectrum antibacterial property, was constructed by the layer-by-layer (LBL) method. The building process was monitored by quartz crystal microbalance with dissipation (QCM-D); the physical properties, such as topography, stiffness in dry and liquid state, and conformation of Lys in the film, were thoroughly characterized. These physical properties were modulated by varying the salt concentration at which the film was constructed. The film not only allows for favorable cell attachment and proliferation of preosteoblasts Mc3t3-E1 but also provides antibacterial property against Gram-positive bacteria, S. aureus and M. lysodeikticus, and Gram-negative bacteria, E. coli. It also displays good antioxidant property, which plays a critical role on fast cell attachment at the initial stage.

Protein Adsorption and Coordination-Based End-Tethering of Functional Polymers on Metal-Phenolic Network Films

Metal-phenolic network (MPN) coatings have generated increasing interest owing to their biologically inspired nature, facile fabrication, and near-universal adherence, especially for biomedical applications. However, a key issue in biomedicine is protein fouling, and the adsorption of proteins on tannic acid-based MPNs remains to be comprehensively studied. Herein, we investigate the interaction of specific biomedically relevant proteins in solution (e.g., bovine serum albumin (BSA), immunoglobulin G (IgG), fibrinogen) and complex biological media (serum) using layer-by-layer-assembled tannic acid/Fe^III MPN films. When Fe^III was the outermost layer, galloyl-modified poly(2-ethyl-2-oxazoline) (P(EtOx)-Gal) could be grafted to the films through coordination bonds. Protein fouling and bacterial adhesion were greatly suppressed after functionalization with P(EtOx)-Gal and the mass of adsorbed protein was reduced by 79%. Interestingly, larger proteins adsorbed more on both the MPNs and P(EtOx)-functionalized MPNs. This study provides fundamental information on the interactions of MPNs with single proteins, mixtures of proteins as encountered in serum, and the noncovalent, coordination-based, functionalization of MPN films.

Multilayer Assembly of Tannic Acid and an Amphiphilic Copolymer Poloxamer 188 on Planar Substrates toward Multifunctional Surfaces with Discrete Microdome-Shaped Features

Tannic acid (TA) is a natural polyphenol compound with a broad spectrum of biological activities, the most notable of which being antioxidation. Poloxamer 188 (P188), a synthetic triblock copolymer of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), is amphiphilic in nature and best known for its ability to seal structurally damaged cellular membranes. The integration of both substances onto planar substrates could bring a new option for multifunctional coatings that are advantageous for implantable biomedical devices. Here, we demonstrate the feasibility of multilayer assembly of TA/P188 toward such a coating based on hydrogen bonding between phenolic hydroxyls of TA and ether groups of P188, and the unique surface feature it generates. The interactions between these two compounds were studied both in solution and in substrate-supported layer-by-layer assembly. The multilayer assembly process exhibits an exponential growth pattern as characterized by UV-vis spectrophotometry and quartz crystal microbalance with dissipation. Morphologically unique, microdome-shaped surface features emerge and evolve with the number of layers assembled. Such features bring a reservoir function to this coating, as demonstrated by the loading of hydrophobic nile red dye. Furthermore, the presence of TA in the multilayers was revealed by silver nitrate staining, and its antioxidation activity was demonstrated through a 2,2-diphenyl-1-picryl-hydrazyl free-radical scavenging assay.

Restructuring of poly(2-ethyl-2-oxazoline)/tannic acid multilayers into fibers

H-Bonded, pH-responsive poly(2-ethyl-2-oxazoline) (PEOX) and tannic acid (TA) multilayers were prepared by layer-by-layer deposition. Free-floating PEOX/TA multilayers were shown to restructure in a pH3 phosphate buffer solution to H-bonded, pH-responsive PEOX/TA fibers. This restructuring was also evident during the growth of multilayers thicker than 15 bilayers (BL). The growth profile of 30 BL-thick films showed a significant decrease in the film thickness from 118 nm to 85 nm between 15 BL and 20 BL, after which the growth trend was regained with some small fluctuations. This decrease was associated with the detachment of film patches from the top surface of the film. The rinse solutions consisted of fibrous aggregates, which were formed by the restructuring of the detached multilayer patches. These fibers were characterized by TGA, XPS, FTIR and SEM measurements which showed that the fibers consisted of H-bonded PEOX and TA molecules. As such, the fibers were pH-responsive and disintegrated at pH > 8.5. Scanning electron microscopy images indicated that the fibers might have been formed by the curling of planar LbL film patches and the dried fibers looked like collapsed hollow tubes on solid substrates. These results contribute to our understanding of the stability of LbL films in various chemical conditions and the ways to modify the morphology of self-assembled structures. pH-responsive fibrous aggregates are important in a variety of biomedical applications, from controlled release to sensors.

Tuning of Thermoresponsivity of a Poly(2-alkyl-2-oxazoline) Block Copolymer by Interaction with Surface-Active and Chaotropic Metallacarborane Anion

Thermoresponsive nanoparticles based on the interaction of metallacarboranes, bulky chaotropic and surface-active anions, and poly(2-alkyl-2-oxazoline) block copolymers were prepared. Recently, the great potential of metallacarboranes have been recognized in biomedicine and many delivery nanosystems have been proposed. However, none of them are thermoresponsive. Therefore, a thermoresponsive block copolymer, poly(2-methyl-2-oxazoline)-block-poly(2-n-propyl-2-oxazoline) (PMeOx-PPrOx), was synthesized to encapsulate metallacarboranes. Light scattering, NMR spectroscopy, isothermal titration calorimetry, and cryogenic TEM were used to characterize all solutions of the formed nanoparticles. The cloud-point temperature (T_CP ) of the block copolymer was observed at 30 °C and polymeric micelles formed above this temperature. Cobalt bis(dicarbollide) anion (COSAN) interacts with both polymeric segments. Depending on the COSAN concentration, this affinity influenced the phase transition of the thermoresponsive PPrOx block. The T_CP shifted to lower values at a lower COSAN content. At higher COSAN concentrations, the hybrid nanoparticles are fragmented into relatively small pieces. This system is also thermoresponsive, whereby an increase in temperature leads to higher polymer mobility and COSAN release.

Facile Oriented Immobilization of Histidine-Tagged Proteins on Nonfouling Cobalt Polyphenolic Self-Assembly Surfaces

In this study, a completely green and facile protocol to oriented immobilization of histidine-tagged (His-tagged) proteins based on plant polyphenolic tannic acid (TA) is described. This is the first time that TA has been applied as ionic chelators to immobilize His-tagged proteins. To reduce the nonspecific interactions between the TA and immobilized proteins, we assembled nonfouling zwitterionic poly(sulfobetaine methacrylate) (PSBMA) on the TA surface. The use of PSBMA could maintain the high activity of the His-tagged proteins and inhibit the adsorption of untagged protein to the TA surface. Subsequently, the obtained TA/PSBMA film was further chelated with Co^II for specific binding to a His-tagged protein. As Co^III is more stable and inert than Co^II, the chelated Co^II was oxidized to Co^III. Using this approach, His-tagged Chitinase was anchored to TA/PSBMA/Co^III film as a catalyst for the hydrolysis of chitin. The loading capacity of the film for the His-tagged Chitinase can reach ∼4.0 μg/cm². Moreover, the oriented immobilized Chitinase had high catalytic activity and excellent thermal and storage stability as well as being more resistant to proteolytic digestion by papain. This low-cost and green protein-oriented immobilization strategy may serve as a versatile platform for a range of applications, such as biomaterials, biocatalysis, sensors, drug delivery, and so on.

Hydrogen-Bonded Polymer Complex Thin Film of Poly(2-oxazoline) and Poly(acrylic acid)

The hydrogen-bonded polymer complex thin film of poly(2-ethyl-2-oxazoline) (PEOX) and poly(acrylic acid) (PAA) was fabricated with layer-by-layer (LbL) assembly. The film shows exponential growth at early stage and transfers to linear growth after 10 assembling cycles, and the stable thickness increment per assembling cycle in the linear region could be higher than 100 nm. The film growth should be related with polymer chain diffusion during LbL assembly. The effects of assembling time, rinsing time, temperature, pH value, concentration and molecular weight on the thin film growth were investigated. Increasing the assembly time, the temperature and the concentration is favorable to produce the thick film. Prolonging rinsing time is good for preparing smooth film. The film can be constructed below pH 4.5 while the prepared film will not completely dissolve until pH value elevates to 7.0. Molecular weight has a subtle effect on the PEOX/PAA film growth. The PEOX-PAA pair that has a big molecular weight contrast shows fast film growth in the linear region.

Anisotropic noble metal nanoparticles: Synthesis, surface functionalization and applications in biosensing, bioimaging, drug delivery and theranostics

Anisotropic nanoparticles have fascinated scientists and engineering communities for over a century because of their unique physical and chemical properties. In recent years, continuous advances in design and fabrication of anisotropic nanoparticles have opened new avenues for application in various areas of biology, chemistry and physics. Anisotropic nanoparticles have the plasmon absorption in the visible as well as near-infrared (NIR) region, which enables them to be used for crucial applications such as biological imaging, medical diagnostics and therapy ("theranostics"). Here, we describe the progress in anisotropic nanoparticles achieved since the millennium in the area of preparation including various shapes and modification of the particle surface, and in areas of application by providing examples of applications in biosensing, bio-imaging, drug delivery and theranostics. Furthermore, we also explain various mechanisms involved in cellular uptake of anisotropic nanoparticles, and conclude with our opinion on various obstacles that limit their applications in biomedical field.

STATEMENT OF SIGNIFICANCE

Anisotropy at the molecular level has always fascinated scientists and engineering communities for over a century, however, the research on novel methods through which shape and size of nanoparticles can be precisely controlled has opened new avenues for anisotropic nanoparticles in various areas of biology, chemistry and physics. In this manuscript, we describe progress achieved since the millennium in the areas of preparation of various shapes of anisotropic nanoparticles, investigate various methods involved in modifying the surface of these NPs, and provide examples of applications in biosensing and bio-imaging, drug delivery and theranostics. We also present mechanisms involved in cellular uptake of nanoparticles, describe different methods of preparation of anisotropic nanoparticles including biomimetic and photochemical synthesis, and conclude with our opinion on various obstacles that limit their applications in biomedical field.

Hydrogen bonded capsules by layer-by-layer assembly of tannic acid and poly(2-n-propyl-2-oxazoline) for encapsulation and release of macromolecules

We report hydrogen bonded capsules with the built-in ability to release loaded bioactive molecules at a physiological temperature of 37 °C.

Sulfolane as Common Rate Accelerating Solvent for the Cationic Ring-Opening Polymerization of 2-Oxazolines

The search for alternative solvents for the cationic ring-opening polymerization (CROP) of 2-methyl-2-oxazoline (MeOx) is driven by the poor solubility of P(MeOx) in polymerization solvents such as acetonitrile (CH₃CN) and chlorobenzene as well as in MeOx itself. In this study, solvent screening has revealed that especially sulfolane is a good solvent for PMeOx. Unexpectedly, an increased propagation rate constant (k_p) was found for the CROP of MeOx in sulfolane. Further extended kinetic studies at different temperatures (60-180 °C), revealed that the acceleration is due to an increase in frequency factor, while the activation energy (E_a) of the reaction is hardly affected. In order to explore the versatility of sulfolane as polymerization solvent for the CROP of 2-oxazolines in general, also the polymerization kinetics of other 2-oxazoline monomers, such as 2-ethyl-2-oxazoline (EtOx) and 2-phenyl-2-oxazoline (PhOx), have been studied, revealing a common acceleration of the CROP of 2-oxazoline monomers in sulfolane. This also enabled more controlled synthesis of PMeOx-block-PPhOx block copolymers that otherwise suffers from solvent incompatibility.

Hydrogen-Bonded Multilayer Films Based on Poly(N-vinylamide) Derivatives and Tannic Acid

Layer-by-layer (LbL) assembly based on hydrogen-bonding interactions is generating great interest for biomedical applications because it is composed of neutral polymers, while LbL assembly based on electrostatic interaction requires polycations which may induce toxicity issues. As a neutral polymer, poly(N-vinylamide), which has low toxicity compared to poly(acrylamide), has the potential to fabricate LbL thin films via hydrogen-bonding interactions. Herein we report interpolymer complexes of poly(N-vinylamide)s and natural polyphenol tannic acid to form the multilayered thin film. Poly(N-vinylformamide) and poly(N-vinylacetamide), which are water-soluble and insoluble in acetonitrile, could not form complexes with TA in water. On the other hand, N-alkylated poly(N-vinylamide) such as poly(N-ethyl-N-vinylformamide) and poly(N-methyl-N-vinylacetamide) was soluble in acetonitrile and allowed the LbL assembly to proceed with TA. Furthermore, the QCM frequency shift with films composed of poly(N-ethyl-N-vinylformamide) and TA were stable in water, while those of poly(N-methyl-N-vinylacetamide) and TA were instable in water, possibly because formamide has lower steric hindrance compared to acetamide to allow stronger hydrogen-bonding interactions to take place. Thus, LbL assembly reactions with alkylated poly(N-vinylamide)s and TA were investigated and revealed that poly(N-ethyl-N-formamide) and TA, which are water-soluble, effectively interacted with one another to generate water-stable hydrogen-bonded multilayered films.