Electrospun Contrast-Agent-Loaded Fibers for Colon-Targeted MRI

Fmoc-FF hydrogels and nanogels for improved and selective delivery of dexamethasone in leukemic cells and diagnostic applications

Dexamethasone (DEX) is a synthetic analogue of cortisol commonly used for the treatment of different pathological conditions, comprising cancer, ocular disorders, and COVID-19 infection. Its clinical use is hampered by the low solubility and severe side effects due to its systemic administration. The capability of peptide-based nanosystems, like hydrogels (HGs) and nanogels (NGs), to serve as vehicles for the passive targeting of active pharmaceutical ingredients and the selective internalization into leukemic cells has here been demonstrated. Peptide based HGs loaded with DEX were formulated via the "solvent-switch" method, using Fmoc-FF homopeptide as building block. Due to the tight interaction of the drug with the peptidic matrix, a significant stiffening of the gel (G' = 67.9 kPa) was observed. The corresponding injectable NGs, obtained from the sub-micronization of the HG, in the presence of two stabilizing agents (SPAN®60 and TWEEN®60, 48/52 w/w), were found to be stable up to 90 days, with a mean diameter of 105 nm. NGs do not exhibit hemolytic effects on human serum, moreover they are selectively internalized by RS4;11 leukemic cells over healthy PBMCs, paving the way for the generation of new diagnostic strategies targeting onco-hematological diseases.

Multi-material electrospinning: from methods to biomedical applications

Electrospinning as a versatile, simple, and cost-effective method to engineer a variety of micro or nanofibrous materials, has contributed to significant developments in the biomedical field. However, the traditional electrospinning of single material only can produce homogeneous fibrous assemblies with limited functional properties, which oftentimes fails to meet the ever-increasing requirements of biomedical applications. Thus, multi-material electrospinning referring to engineering two or more kinds of materials, has been recently developed to enable the fabrication of diversified complex fibrous structures with advanced performance for greatly promoting biomedical development. This review firstly gives an overview of multi-material electrospinning modalities, with a highlight on their features and accessibility for constructing different complex fibrous structures. A perspective of how multi-material electrospinning opens up new opportunities for specific biomedical applications, i.e., tissue engineering and drug delivery, is also offered.

Core-Shell Polyvinyl Alcohol (PVA) Base Electrospinning Microfibers for Drug Delivery

In this study, electrospun membranes were developed for controlled drug release applications. Both uniaxial Polyvinyl alcohol (PVA) and coaxial fibers with a PVA core and a poly (L-lactic acid) (PLLA) and polycaprolactone (PCL) coating were produced with different coating structures. The best conditions for the manufacture of the fibers were also studied and their morphology was analyzed as a function of the electrospinning parameters. Special attention was paid to the fiber surface morphology of the coaxial fibers, obtaining both porous and non-porous coatings. Bovine serum albumin (BSA) was used as the model protein for the drug release studies and, as expected, the uncoated fibers were determined to have the fastest release kinetics. Different release rates were obtained for the coated fibers, which makes this drug release system suitable for different applications according to the release time required.

Molecular imaging nanoprobes for theranostic applications

As a non-invasive imaging monitoring method, molecular imaging can provide the location and expression level of disease signature biomolecules in vivo, leading to early diagnosis of relevant diseases, improved treatment strategies, and accurate assessment of treating efficacy. In recent years, a variety of nanosized imaging probes have been developed and intensively investigated in fundamental/translational research and clinical practice. Meanwhile, as an interdisciplinary discipline, this field combines many subjects of chemistry, medicine, biology, radiology, and material science, etc. The successful molecular imaging not only requires advanced imaging equipment, but also the synthesis of efficient imaging probes. However, limited summary has been reported for recent advances of nanoprobes. In this paper, we summarized the recent progress of three common and main types of nanosized molecular imaging probes, including ultrasound (US) imaging nanoprobes, magnetic resonance imaging (MRI) nanoprobes, and computed tomography (CT) imaging nanoprobes. The applications of molecular imaging nanoprobes were discussed in details. Finally, we provided an outlook on the development of next generation molecular imaging nanoprobes.

The effect of formulation morphology on stimuli-triggered co-delivery of chemotherapeutic and MRI contrast agents

Most conventional chemotherapeutics have narrow therapeutic windows, and thus their delivery remains challenging and often raises safety and efficacy concerns. Theranostic platforms, with simultaneous encapsulation of therapeutic and diagnostic agents, have been proposed as next-generation formulations which can overcome this issue. In this work, we used electrohydrodynamic approaches to fabricate core@shell formulations comprising a pH responsive Eudragit L100 shell embedded with superparamagnetic iron oxide nanoparticles (SPIONs), and a thermo-responsive poly(N-isopropylacrylamide) (PNIPAM)/ethyl cellulose core loaded with the model drug carmofur. By varying the weight ratio of core polymer to shell polymer, the morphology of PNIPAM/ethyl cellulose@Eudragit L100 microparticles could be changed from concave to spherical. Smooth cylindrical fibres could also be generated. All the formulations exist as amorphous solid dispersions of drug-in-polymer, with distinct core@shell architectures. The fibres have clear thermo-responsive drug release profiles, while no thermo-responsive properties can be seen with the particles. All the formulations can protect SPIONs from degradation in gastric fluids (pH ∼ 1.5), and around the physiological pH range the materials offer effective and pH-responsive relaxivity. The r₂ values also display clear linear relationships with drug release data, suggesting the potential of using MRI signals to track drug release in vivo. Mathematical equations were established to track drug release in vitro, with very similar experimental and predicted release profiles obtained.

An investigation of alkaline phosphatase enzymatic activity after electrospinning and electrospraying

The high target specificity and multifunctionality of proteins has led to great interest in their clinical use. To this end, the development of delivery systems capable of preserving their bioactivity and improving bioavailability is pivotal to achieve high effectiveness and satisfactory therapeutic outcomes. Electrohydrodynamic (EHD) techniques, namely electrospinning and electrospraying, have been widely explored for protein encapsulation and delivery. In this work, monoaxial and coaxial electrospinning and electrospraying were used to encapsulate alkaline phosphatase (ALP) into poly(ethylene oxide) fibres and particles, respectively, and the effects of the processing techniques on the integrity and bioactivity of the enzyme were assessed. A full morphological and physicochemical characterisation of the blend and core-shell products was performed. ALP was successfully encapsulated within monolithic and core-shell electrospun fibres and electrosprayed particles, with drug loadings and encapsulation efficiencies of up to 21% and 99%, respectively. Monoaxial and coaxial electrospinning were equally effective in preserving ALP function, leading to no activity loss compared to fresh aqueous solutions of the enzyme. While the same result was observed for monoaxial electrospraying, coaxial electrospraying of ALP caused a 40% reduction in its bioactivity, which was attributed to the high voltage (22.5 kV) used during processing. This demonstrates that choosing between blend and coaxial EHD processing for protein encapsulation is not always straightforward, being highly dependent on the chosen therapeutic agent and the effects of the processing conditions on its bioactivity.

pH-Responsive nanocomposite fibres allowing MRI monitoring of drug release

Magnetic resonance imaging (MRI) is one of the most widely-used non-invasive clinical imaging tools, producing detailed anatomical images whilst avoiding side effects such as trauma or X-ray radiation exposure. In this article, a new approach to non-invasive monitoring of drug release from a delivery vehicle via MRI was developed, using pH-responsive Eudragit L100 and S100 fibres encapsulating superparamagnetic iron oxide nanoparticles (SPIONs) and carmofur (a drug used in the treatment of colon cancer). Fibres were prepared by electrospinning, and found to be smooth and cylindrical with diameters of 645 ± 225 nm for L100 and 454 ± 133 nm for S100. The fibres exhibited pH responsive dissolution behaviour. Around the physiological pH range, clear pH-responsive proton relaxation rate changes due to matrix swelling/dissolution can be observed: r2 values of L100 fibres increase from 29.3 ± 8.3 to 69.8 ± 2.5 mM-1 s-1 over 3 h immersion in a pH 7.4 medium, and from 13.5 ± 2.0 mM-1 s-1 to 42.1 ± 3.0 mM-1 s-1 at pH 6.5. The r2 values of S100 fibres grow from 30.4 ± 4.4 to 64.7 ± 1.0 mM-1 s-1 at pH 7.4, but at pH 6.5, where the S100 fibres are not soluble, r2 remains very low (< 4 mM-1 s-1). These dramatic changes in relaxivity demonstrate that pH-responsive dissolution results in SPION release. In vitro drug release studies showed the formulations gave rapid release of carmofur at physiological pH values (pH 6.5 and 7.4), and acid stability studies revealed that they can protect the SPIONs from digestion in acid environments, giving the fibres potential for oral administration. Exploration of the relationship between relaxivity and carmofur release suggests a linear correlation (R2 > 0.94) between the two. Mathematical equations were developed to predict carmofur release in vitro, with very similar experimental and predicted release profiles obtained. Therefore, the formulations developed herein have the potential to be used for non-invasive monitoring of drug release in vivo, and could ultimately result in dramatic reductions to off-target side effects from interventions such as chemotherapy.

Electrospinning nanofiber technology: a multifaceted paradigm in biomedical applications

This review focuses on the process of preparation of nanofibers via Es, the design and setup of the instrument, critical parameter optimization, preferable polymers, solvents, characterization techniques, and recent development and biomedical applications of nanofibers.

Electrospinning for healthcare: recent advancements

This perspective explores recent developments and innovations in the electrospinning technique and their potential applications in biomedicine.

Utilization of a Single Experimental Design for the Optimization of Furosemide Modified-Release Tablet Formulations

BACKGROUND

The loop diuretic drug furosemide is widely used for the treatment of edema in various conditions, such as pulmonary, cardiac and hepatic edema, as well as cardiac infarction. Furosemide, due to its poor water solubility and low bioavailability after oral administration of conventional dosage form, is categorized as class IV in the biopharmaceutical classification system.

OBJECTIVE

In the case of furosemide, this release profile is responsible for various physiological problems, acute diuresis being the most serious. This adverse effect can be circumvented by the modified release of furosemide from tablet formulations compared to those forms designed for immediate release.

METHODS

In this report, a D-optimal combined experimental design was applied for the development of furosemide containing bilayer and compression coated tablets, aiming at lowering the drug's burst release in the acidic environment of the stomach. A D-optimal combined design was selected in order to include all requirements in one design with many levels for the factors examined. The following responses were selected as the ones reflecting better criteria for the desired drug release: dissolution at 120 min (30-40%), 300 min (60-70%) and 480 min >95%. The new formulations, suggested by the Doptimal combined design, incorporated different grades of Eudragit ® polymers (Eudragit® E100 and Eudragit® L100-55), lactose monohydrate and HPMC K15M. The dissolution profile of furosemide from these systems was probed via in vitro dissolution experiments in buffer solutions simulating the pH of the gastrointestinal tract.

RESULTS

The results indicate that the use of Eudragit® E100 in conjunction with lactose monohydrate led to 21.32-40.85 % drug release, in the gastric medium, in both compression-coated and bilayer tablets. This is lower than the release of the mainstream drug Lasix® (t=120 min, 44.5% drug release), implying longer gastric retention and drug waste minimization.

CONCLUSION

Furosemide's release in the intestinal environment, from compression coated tablets incorporating Eudragit® L100-55 and HPMC K15M in the inner core or one of the two layers of the bilayer tablets, was delayed, compared to Lasix®.

A Novel Profiled Multi-Pin Electrospinning System for Nanofiber Production and Encapsulation of Nanoparticles into Nanofibers

Electrospinning with various machine configurations is being used to produce polymer nanofibers with different rates of output. The use of polymers with high viscosity and the encapsulation of nanoparticles for achieving functionalities are some of the limitations of the existing methods. A profiled multi-pin electrospinning (PMES) setup is demonstrated in this work that overcomes the limitations in the needle and needleless electrospinning like needle clogging, particle settling, and uncontrolled/uneven Taylor cone formation, the requirement of very high voltage and uncontrolled distribution of nanoparticles in nanofibers. The key feature of the current setup is the use of profiled pin arrangement that aids in the formation of spherical shape polymer droplet and hence ensures uniform Taylor cone formation throughout the fiber production process. With a 10 wt% of Polyvinyl Alcohol (PVA) polymer solution and at an applied voltage of 30 kV, the production rate was observed as 1.690 g/h and average fiber diameter obtained was 160.5 ± 48.9 nm for PVA and 124.9 ± 49.8 nm for Cellulose acetate (CA) respectively. Moreover, the setup also provides the added advantage of using high viscosity polymer solutions in electrospinning. This approach is expected to increase the range of multifunctional electrospun nanofiber applications.

Electrospun nanofibers for the delivery of active drugs through nasal, oral and vaginal mucosa: Current status and future perspectives

Transmucosal surfaces bypass many limitations associated with conventional drug delivery (oral and parenteral routes), such as poor absorption rate, enzymatic activity, acidic environment and first-pass metabolism occurring inside the liver. However, these surfaces have several disadvantages such as poor retention time, narrow absorption window and continuous washout of the drug by the surrounding fluids. Electrospun nanofibers with their unique surface properties and encapsulation efficiency may act as novel drug carriers to overcome the challenges associated with conventional drug delivery routes, so as to achieve desired therapeutic responses. This review article provides detailed information regarding the challenges faced in the mucosal delivery of drugs, and the use of nanofiber systems as an alternative to deliver drugs to the systemic circulation, as well as local drug administration. The physiological and anatomical features of different types of mucosal surfaces and current challenges are systematically discussed. We also address future considerations in the area of transmucosal delivery of some important drugs.

Multi-component supramolecular fibers with elastomeric properties and controlled drug release

Supramolecular fibers fabricated by co-axial electrospinning combine load-bearing properties and sustained drug release of hydrophobic and UPy-modified drugs.

pH-Sensitive Magnetite Nanoparticles Modified with Hyperbranched Polymers and Folic Acid for Targeted Imaging and Therapy

Objective:

A novel pH-sensitive superparamagnetic drug delivery system was developed based on quercetin loaded hyperbranched polyamidoamine-b-polyethylene glycol-folic acid-modified Fe3O4 nanoparticles (Fe3O4@PAMAM-b-PEG-FA).

Methods:

The nanoparticles exhibit excellent water dispersity with well-defined size distribution (around 51.8 nm) and strong magnetisability. In vitro release studies demonstrated that the quercetinloaded Fe3O4@PAMAM-b-PEG-FA nanoparticles are stable at normal physiologic conditions (pH 7.4 and 37°C) but sensitive to acidic conditions (pH 5.6 and 37°C), which led to the rapid release of the loaded drug.

Results:

Fluorescent microscopy results indicated that the Fe3O4@PAMAM-b-PEG-FA nanoparticles could be efficiently accumulated in tumor tissue compared with non-folate conjugated nanoparticles. Also, in comparison with free quercetin, the quercetin loaded Fe3O4@PAMAM-b-PEG-FA exerts higher cytotoxicity. Furthermore, this magnetic nanocarrier showed high MRI sensitivity, even in its lower iron content.

Conclusion:

The results indicated that the prepared nanoparticles are an effective chemotherapy and diagnosis system to inhibit proliferation and monitor the progression of tumor cells, respectively.

Electrospun oral formulations for combined photo-chemotherapy of colon cancer

In this work, we report new formulations for the combined photo-chemotherapy of colon cancer. Fibers were fabricated via coaxial-electrospinning with the intent of targeting delivery of the anti-cancer drug carmofur (CAR) and the photosensitizer rose bengal (RB) selectively to the colon site. The fibers comprised a hydroxypropyl methylcellulose (HPMC) core loaded with the active ingredients, and a pH-sensitive Eudragit L100-55 shell. The fibers were found to be homogeneous and cylindrical and have visible core-shell structures. X-ray diffraction and differential scanning calorimetry demonstrated that both CAR and RB were present in the fibers in the amorphous physical form. In vitro drug release studies showed that the fibers have the potential to selectively deliver drugs to the colon, with only 10-15 % release noted in the acidic conditions of the stomach but sustained release at pH 7.4. Cytotoxicity studies were undertaken on human dermal fibroblast (HDF) and colon cancer (Caco-2) cells, and the influence of light on cell death was also explored. The fibers loaded with CAR alone showed obvious toxicity to both cell lines, with and without the application of light. The RB-loaded fibers led to high viability (ca. 80% for both cell types) in the absence of light, but much greater toxicity was noted (30-50%) with light. The same trends were observed with the formulation containing both CAR and RB, but with lower viabilities. The RB and RB/CAR loaded systems show clear selectivity for cancerous over non-cancerous cells. Finally, mucoadhesion studies revealed there were strong adhesive forces between the rat colonic mucosa and the fibers after they had passed through an acidic environment. Such electrospun fibers thus could have potential in the development of oral therapies for colon cancer.

Nanoparticles for the regulation of intestinal inflammation: opportunities and challenges

Prevalence of chronic inflammation of the gastrointestinal tract is increasing, emerging as a public health challenge. Conventional drug delivery systems targeting the colon have improved the treatment of inflammatory bowel disease. However, therapy frequently results in inconsistent efficacy and toxicity problems. Novel approaches based on nanoparticles offer several advantages over conventional dosage forms due to their ability to selectively target inflamed tissues. Several formulation efforts have been made in order to obtain increasingly selective nanosized systems, some with promising results in animal models of colitis. Despite all advances, no nanomedicines are yet approved for clinical use in inflammatory bowel disease. This review discusses the most recent efforts made toward the development of nanoparticles for regulating chronic intestinal inflammation.

The Relationships between the Working Fluids, Process Characteristics and Products from the Modified Coaxial Electrospinning of Zein

The accurate prediction and manipulation of nanoscale product sizes is a major challenge in material processing. In this investigation, two process characteristics were explored during the modified coaxial electrospinning of zein, with the aim of understanding how this impacts the products formed. The characteristics studied were the spreading angle at the unstable region (θ) and the length of the straight fluid jet (L). An electrospinnable zein core solution was prepared and processed with a sheath comprising ethanolic solutions of LiCl. The width of the zein nanoribbons formed (W) was found to be more closely correlated with the spreading angle and straight fluid jet length than with the experimental parameters (the electrolyte concentrations and conductivity of the shell fluids). Linear equations W = 546.44L - 666.04 and W = 2255.3θ - 22.7 could be developed with correlation coefficients of Rwl2 = 0.9845 and Rwθ2 = 0.9924, respectively. These highly linear relationships reveal that the process characteristics can be very useful tools for both predicting the quality of the electrospun products, and manipulating their sizes for functional applications. This arises because any changes in the experimental parameters would have an influence on both the process characteristics and the solid products' properties.

Drug Delivery Applications of Core-Sheath Nanofibers Prepared by Coaxial Electrospinning: A Review

Electrospinning has emerged as one of the potential techniques for producing nanofibers. The use of electrospun nanofibers in drug delivery has increased rapidly over recent years due to their valuable properties, which include a large surface area, high porosity, small pore size, superior mechanical properties, and ease of surface modification. A drug loaded nanofiber membrane can be prepared via electrospinning using a model drug and polymer solution; however, the release of the drug from the nanofiber membrane in a safe and controlled way is challenging as a result of the initial burst release. Employing a core-sheath design provides a promising solution for controlling the initial burst release. Numerous studies have reported on the preparation of core-sheath nanofibers by coaxial electrospinning for drug delivery applications. This paper summarizes the physical phenomena, the effects of various parameters in coaxial electrospinning, and the usefulness of core-sheath nanofibers in drug delivery. Furthermore, this report also highlights the future challenges involved in utilizing core-sheath nanofibers for drug delivery applications.

Core-shell nanofibers as drug delivery systems

Core-shell nanofibers have grown in popularity over the last decade owing to their special features and their many applications in biomedicine. They can be produced by electrospinning of immiscible polymer blends or emulsions through a single nozzle or by electrospinning using a coaxial nozzle. Several of the electrospinning parameters allow great versatility for the compositions and diameters of core-shell nanofibers to be produced. Morphology of core-shell nanofibers can be investigated using transmission electron microscopy and, in some cases, scanning electron microscopy. Several studies have shown that core-shell nanofibers have some advantages over monolithic nanofibers, such as better drug, protein, gene or probiotic incorporation into the nanofibers, greater control over drug release, and maintenance of protein structure and activity during electrospinning. We herein review the production and characterization of core-shell nanofibers, the critical parameters that affect their development, and their advantages as delivery systems.

Ingestible Contrast Agents for Gastrointestinal Imaging

Gastrointestinal (GI) ailments cover a wide variety of diseases involving the esophagus, stomach, small intestine, large intestine, and rectum. They bring about many inconveniences in daily life in chronic diseases and can even be life threatening in acute cases. Rapid and safe detection approaches are essential for early diagnosis and timely management. Contrast agents for GI imaging can enhance contrast to distinguish abnormal lesions from normal structures. Computed tomography and magnetic resonance imaging are two important diagnostic tools for the evaluation of GI conditions. This review mainly involves several common GI diseases, including inflammatory diseases, intestinal tumors, diarrhea, constipation, and gastroesophageal reflux diseases. Selected contrast agents, such as barium sulfate, iodine-based agents, gadolinium-based agents, and others, are summarized. Going forward, continued endeavors are being made to develop more emerging contrast agents for other imaging modalities.

Amine-Functionalized Electrically Conductive Core-Sheath MEH-PPV:PCL Electrospun Nanofibers for Enhanced Cell-Biomaterial Interactions

In the present study, a conducting polymer, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) along with a biodegradable polymer poly(ε-caprolactone) (PCL) was used to prepare an electrically conductive, biocompatible, bioactive, and biodegradable nanofibrous scaffold for possible use in neural tissue engineering applications. Core-sheath electrospun nanofibers of PCL as the core and MEH-PPV as the sheath, were surface-functionalized with (3-aminopropyl) triethoxysilane (APTES) and 1,6-hexanediamine to obtain amine-functionalized surface to facilitate cell-biomaterial interactions with the aim of replacing the costly biomolecules such as collagen, fibronectin, laminin, and arginyl-glycyl-aspartic acid (RGD) peptide for surface modification. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirmed the formation of core-sheath morphology of the electrospun nanofibers, whereas Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) revealed successful incorporation of amine functionality after surface functionalization. Adhesion, spreading, and proliferation of 3T3 fibroblasts were enhanced on the surface-functionalized electrospun meshes, whereas the neuronal model rat pheochromocytoma 12 (PC12) cells also adhered and differentiated into sympathetic neurons on these meshes. Under a constant electric field of 500 mV for 2 h/day for 3 consecutive days, the PC12 cells displayed remarkable improvement in the neurite formation and outgrowth on the surface-functionalized meshes that was comparable to those on the collagen-coated meshes under no electrical signal. Electrical stimulation studies further demonstrated that electrically stimulated PC12 cells cultured on collagen I coated meshes yielded more and longer neurites than those of the unstimulated cells on the same scaffolds. The enhanced neurite growth and differentiation suggest the potential use of these scaffolds for neural tissue engineering applications.

Electrospun amorphous solid dispersions of poorly water-soluble drugs: A review

The development of oral dosage forms for poorly water-soluble active pharmaceutical ingredients (APIs) is a persistent challenge. A range of methods has been explored to address this issue, and amorphous solid dispersions (ASDs) have received increasing attention. ASDs are typically prepared by starting with a liquid precursor (a solution or melt) and applying energy for solidification. Many techniques can be used, with the emergence of electrospinning as a potent option in recent years. This method uses electrical energy to induce changes from liquid to solid. Through the direct applications of electrical energy, electrospinning can generate nanofiber-based ASDs from drug-loaded solutions, melts and melt-solutions. The technique can also be combined with other approaches using the application of mechanical, thermal or other energy sources. Electrospinning has numerous advantages over other approaches to produce ASDs. These advantages include extremely rapid drying speeds, ease of implentation, compatibility with a wide range of active ingredients (including those which are thermally labile), and the generation of products with large surface areas and high porosity. Furthermore, this technique exhibits the potential to create so-called 'fifth-generation' ASDs with nanostructured architectures, such as core/shell or Janus systems and their combinations. These advanced systems can improve dissolution behaviour and provide programmable drug release profiles. Additionally, the fiber components and their spatial distributions can be precisely controlled. Electrospun fiber-based ASDs can maintain an incorporated active ingredient in the amorphous physical form for prolonged periods of time because of their homogeneous drug distribution within the polymer matrix (typically they comprise solid solutions), and ability to inhibit molecular motion. These ASDs can be utilised to generate oral dosage forms for poorly water-soluble drugs, resulting in linear or multiple-phase release of one or more APIs. Electrospun ASDs can also be exploited as templates for manipulating molecular self-assembly, offering a bridge between ASDs and other types of dosage forms. This review addresses the development, advantages and pharmaceutical applications of electrospinning for producing polymeric ASDs. Material preparation and analysis procedures are considered. The mechanisms through which performance has been improved are also discussed.

The Effect of Molecular Properties on Active Ingredient Release from Electrospun Eudragit Fibers

The formation of nanoscale fibers from pH-sensitive polymers is a route which has been widely explored for targeted drug delivery. In particular, the Eudragit L100 and S100 families of polymers have received significant attention for this purpose. However, while in some cases it is shown that making drug-loaded Eudragit polymers effectively prevents drug release in low-pH media where the polymer is insoluble, this is not always the case, and other studies have reported significant amounts of drug release at acidic pHs. In this study, we sought to gain insight into the factors influencing the release of active ingredients from Eudragit S100 (ES100) fibers. A family of materials was prepared loaded with the model active ingredients (AIs) benzoic acid, 1-naphthoic acid, 1-naphthylamine, and 9-anthracene carboxylic acid. Analogous systems were prepared with an AI-loaded core and an ES100 sheath. The resultant fibers were smooth and cylindrical in the majority of cases, and X-ray diffraction and differential scanning calorimetry showed them to comprise amorphous solid dispersions. When AI release from the monolithic fibers was probed, it was found that there was significant release at pH 1 in all cases except with 9-anthracene carboxylic acid. Analysis of the results indicated that both the molecular weight of the AI and its acidity/basicity are important in controlling release, with lower molecular weight AIs and basic species released more quickly. The same release trends are seen with the core/shell fibers, but AI release at pH 1 is attenuated. The most significant change between the monolithic and core/shell systems was observed in the case of 1-naphthylamine. Mathematical equations were devised to connect molecular properties and AI release under acidic conditions.

Protein-loaded emulsion electrospun fibers optimized for bioactivity retention and pH-controlled release for peroral delivery of biologic therapeutics

Biologics are the most rapidly growing class of therapeutics, but commonly suffer from low stability. Peroral administration of these therapeutics is an attractive delivery route; however, this route introduces unique physiological challenges that increase the susceptibility of proteins to lose function. Formulation of proteins into biomaterials, such as electrospun fibers, is one strategy to overcome these barriers, but such platforms need to be optimized to ensure protein stability and maintenance of bioactivity during the formulation process. This work develops an emulsion electrospinning method to load proteins into Eudragit® L100 fibers for peroral delivery. Horseradish peroxidase and alkaline phosphatase are encapsulated with high efficiency into fibers and released with pH-specificity. Recovery of protein bioactivity is enhanced through reduction of the emulsion aqueous phase and the inclusion of a hydrophilic polymer excipient. Finally, we show that formulation of proteins in lyophilized electrospun fibers extends the therapeutic shelf life compared to aqueous storage. Thus, this platform shows promise as a novel dosage form for the peroral delivery of biotherapeutics.

Core/shell poly(ethylene oxide)/Eudragit fibers for site-specific release

Electrospinning was used to prepare core/shell fibers containing the active pharmaceutical ingredients indomethacin (IMC) or mebeverine hydrochloride (MB-HCl). The shell of the fibers was fabricated from the pH sensitive Eudragit S100 polymer, while the drug-loaded core was based on the mucoadhesive poly(ethylene oxide) (PEO). Three different drug loadings (from 9 to 23% (w/w) of the core mass) were prepared, and for MB-HCl two different molecular weights of PEO were explored. The resultant fibers generally comprise smooth cylinders, although in some cases defects such as surface particles or flattened or merged fibers were visible. Transmission electron microscopy showed all the systems to have clear core and shell compartments. The drugs are present in the amorphous physical form in the fibers. Dissolution tests found that the fibers can effectively prevent release in acidic conditions representative of the stomach, particularly for the acidic indomethacin. After transfer to a pH 7.4 medium, sustained release over between 6 and 22h is observed. Given the mucoadhesive nature of the PEO core, after dissolution of the shell the fibers will be able to adhere to the walls of the intestinal tract and give sustained local drug release. This renders them promising for the treatment of conditions such as irritable bowel disease and colon cancer.

Electrospun organic–inorganic nanohybrids as sustained release drug delivery systems

Novel organic–inorganic nanohybrids have been prepared, and are found to provide long-term extended drug release.