An Injectable, Click-Cross-Linked Small Intestinal Submucosa Drug Depot for the Treatment of Rheumatoid Arthritis

Nanoscopic gel particle for intra-articular injection formulation

Hyaluronic acid (HA) based nanogels showed effective intracellular delivery efficacy for anti-cancer and anti-inflammatory drugs, characterized by their ability targeting relevant cell receptors. In the present study, we demonstrate the ability of hyaluronic acid-polyethyleneimine (HA-PEI) nanogels as a promising dual-functional interfacial active for intra-articular injection to intervene arthritis. Nanomechanical measurements on both model substrates and human cartilage samples confirm that the HA-PEI nanogels can significantly improve interfacial lubrication, in comparison to HA molecules, or silica-based nanoparticles. We show that the Coefficient of Friction significantly decreases with a decreasing nanogel size. The exceptional lubricating performance, coupled with the proven drug delivery capability, evidences the great potential of nanoscopic hydrogels for early-stage arthritis treatment. The flexibility in choosing the chemical nature, molecular architecture, and structural characteristics of nanogels makes it possible to modulate both drug delivery kinetics and interfacial lubrication, thus representing an innovative approach to treat degenerative joint diseases.

Intra-articular hydrogel formulation prolongs the in vivo stability of Toll-like receptor antagonistic peptides for rheumatoid arthritis treatment

Rheumatoid arthritis (RA) is an autoimmune disease characterized by systemic inflammation that primarily affects joint tissue and requires frequent medication. Recently, we developed cyclic phage-display-derived inhibitory peptides (CPs), which act as Toll-like Receptor 4 antagonists. These CPs exhibited therapeutic efficacy against joint diseases by alleviating inflammatory factors. Nonetheless, CP exhibits in vivo instability and a short half-life. Therefore, this study sought to improve the in vivo stability of CP, thereby reducing the frequency of CP administration through the development of an injectable hydrogel depot formulation. To improve in vivo stability, CP was chemically conjugated to hyaluronic acid (HA-CP) and subsequently mixed into a temperature-sensitive hydrogel [methoxy polyethylene glycol-b-poly(ε-caprolactone)-ran-poly(lactide) (PC)] as an injectable depot (PC+(HA-CP)). For comparison, CP was physically mixed with HA and PC (PC+(HA+CP)). Both PC+(HA-CP) and PC+(HA+CP) were found to rapidly form depots upon injection into the joint space. Cell viability assays confirmed the non-toxic nature of PC+(HA-CP) and PC+(HA+CP), whereas both formulations exhibited inhibition of inflammatory factors. Furthermore, PC+(HA-CP) retained CP for a longer duration compared to PC+(HA+CP) in the presence of hyaluronidase and within the RA joint space. Following intra-articular injection, both the PC+(HA-CP) and PC+(HA+CP) depots exhibited reductions in RA symptoms, cartilage regeneration, and suppression of pro-inflammatory cytokine levels. Specifically, by extending the in vivo retention of CP, PC+(HA-CP) demonstrated superior RA treatment efficacy compared to PC+(HA+CP). In conclusion, intra-articular injection of PC+(HA-CP) was validated as an effective strategy for treating RA, owing to its ability to prolong the in vivo retention of CP. This approach holds promise for improving RA management and patient outcomes.

Promotion of diced cartilage survival and regeneration with grafting of small intestinal submucosa loaded with urine-derived stem cells

Cartilage absorption and calcification are prone to occur after the implantation of diced cartilage wrapped with autologous materials, as well as prolong the operation time, aggravate surgical trauma and postoperative pain during the acquisition process. Small intestinal submucosa (SIS) has suitable toughness and excellent degradability, which has been widely used in the clinic. Urine-derived stem cells (USCs), as a new type of stem cells, have multi-directional differentiation potential. In this study, we attempt to create the tissue engineering membrane material, termed USCs-SIS (U-SIS), and wrap the diced cartilage with it, assuming that they can promote the survival and regeneration of cartilage. In this study, after co-culture with the SIS and U-SIS, the proliferation, migration and chondrogenesis ability of the auricular-derived chondrocyte cells (ACs) were significantly improved. Further, the expression levels of chondrocyte phenotype-related genes were up-regulated, whilst that of dedifferentiated genes was down-regulated. The signal pathway proteins (Wnt3a and Wnt5a) were also participated in regulation of chondrogenesis. In vivo, compared with perichondrium, the diced cartilage wrapped with the SIS and U-SIS attained higher survival rate, less calcification and absorption in both short and long terms. Particularly, USCs promoted chondrogenesis and modulated local immune responses via paracrine pathways. In conclusion, SIS have the potential to be a new choice of membrane material for diced cartilage graft. U-SIS can enhance survival and regeneration of diced cartilage as a bioactive membrane material.

Pathophysiology to advanced intra-articular drug delivery strategies: Unravelling rheumatoid arthritis

Rheumatoid arthritis (RA) is one of the most prevalent life-long autoimmune diseases with an unknown genesis. It primarily causes chronic inflammation, pain, and synovial joint-associated cartilage and bone degradation. Unfortunately, limited information is available regarding the etiology and pathogenesis of this chronic joint disorder. In the last few decades, an improved understanding of RA pathophysiology about key immune cells, antibodies, and cytokines has inspired the development of several anti-rheumatic drugs and biopharmaceuticals to act on RA-affected joints. However, life-long frequent systemic high doses of commercially available drugs are currently a limiting factor in the efficient management of RA. To address this issue, various single and double-barrier intra-articular drug delivery systems (IA-DDSs) such as nanocarriers, microparticles, hydrogels, and particles-hybrid hydrogel composite have been developed which can exclusively target the RA-affected joint cavity and release the precisely controlled therapeutic drug concentration for prolonged time whilst avoiding the systemic toxicity. This review provides a comprehensive overview of the pathogenesis of RA and discusses the rational design and development of biomaterials-based novel IA-DDs, ranging from conventional to advanced systems, for improved treatment of RA. Therefore, this review aims to unravel the pathophysiology of rheumatoid arthritis and explore cutting-edge IA-DD strategies exploiting biomaterials. It offers researchers a consolidated and up-to-date resource platform to analyze existing knowledge, identify research gaps, and contribute to the scientific literature.

Enhanced intra-articular therapy for rheumatoid arthritis using click-crosslinked hyaluronic acid hydrogels loaded with toll-like receptor antagonizing peptides

Rheumatoid arthritis (RA) is a chronic inflammatory disorder that results in the deterioration of joint cartilage and bone. Toll-like receptor 4 (TLR4) has been pinpointed as a key factor in RA-related inflammation. While Toll-like receptor antagonizing peptide 2 (TAP2) holds potential as an anti-inflammatory agent, its in vivo degradation rate hinders its efficacy. We engineered depots of TAP2 encapsulated in click-crosslinked hyaluronic acid (TAP2+Cx-HA) for intra-articular administration, aiming to enhance the effectiveness of TAP2 as an anti-inflammatory agent within the joint cavity. Our data demonstrated that FI-TAP2+Cx-HA achieves a longer retention time in the joint cavity compared to FI-TAP2 alone. Mechanistically, we found that TAP2 interacts with TLR4 on the cell membranes of inflammatory cells, thereby inhibiting the nuclear translocation of NF-κB and maintaining it in an inactive cytoplasmic state. In a rat model of RA, the TAP2+Cx-HA formulation effectively downregulated the inflammatory cytokines TNF-α and IL-6, while upregulating the anti-inflammatory cytokine IL-10 and the therapeutic protein 14-3-3ζ. This led to a more rapid restoration of cartilage thickness, increased deposition of glycosaminoglycans, and new bone tissue formation in the regenerated cartilage, in comparison to a single TAP2 treatment after a six-week period. Our results suggest that TAP2+Cx-HA could serve as a potent intra-articular treatment for RA, offering both symptomatic relief and promoting cartilage regeneration. This innovative delivery system holds significant promise for improving the management of RA and other inflammatory joint conditions. STATEMENT OF SIGNIFICANCE: In this study, we developed a therapy by creating toll-like receptor 4 (TLR4)-antagonizing peptide (TAP2)-loaded click-crosslinked hyaluronic acid (TAP2+Cx-HA) depots for direct intra-articular injection. Our study demonstrates that FI-TAP2+Cx-HA exhibits a more than threefold longer lifetime in the joint cavity compared to FI-TAP2 alone. Furthermore, we found that TAP2 binds to TLR4 and masks the nuclear localization signals of NF-κB, leading to its sequestration in an inactive state in the cytoplasm. In a rat model of RA, TAP2+Cx-HA effectively suppresses inflammatory molecules, specifically TNF-α and IL-6, while upregulating the anti-inflammatory cytokine IL-10 and the therapeutic protein 14-3-3ζ. This resulted in faster regeneration of cartilage thickness, increased glycosaminoglycan deposits in the regenerated cartilage, and a twofold increase in new bone tissue formation compared to a single TAP2 treatment.

Fast Absorbent and Highly Bioorthogonal Hydrogels Developed by IEDDA Click Reaction for Drug Delivery Application

In this work, we engineered highly biocompatible and fast absorbent injectable hydrogels derived from norbornene (Nb)-functionalized hyaluronic acid (HA-Nb) and a water-soluble cross-linker possessing tetrazine (Tz) functional groups on both ends of polyethylene glycol (PEG-DTz). The by-product (nitrogen gas) of the inverse electron demand Diels−Alder (IEDDA) cross-linking reaction carved porosity in the resulting hydrogels. By varying the molar ratio of HA-Nb and PEG-DTz (Nb:Tz = 10:10, 10:5, 10:2.5), we were able to formulate hydrogels with tunable porosity, gelation time, mechanical strength, and swelling ratios. The hydrogels formed quickly (gelation time < 100 s), offering a possibility to use them as an injectable drug delivery system. The experimental data showed rapid swelling and a high swelling ratio thanks to the existence of PEG chains and highly porous architectures of the hydrogels. The hydrogels were able to encapsulate a high amount of curcumin (~99%) and released the encapsulated curcumin in a temporal pattern. The PEG-DTz cross-linker, HA-Nb, and the resulting hydrogels showed no cytotoxicity in HEK-293 cells. These fast absorbent hydrogels with excellent biocompatibility fabricated from HA-Nb and the IEDDA click-able cross-linker could be promising drug carriers for injectable drug delivery applications.

Copper-Free Click Chemistry: Applications in Drug Delivery, Cell Tracking, and Tissue Engineering

Traditionally, organic chemical reactions require organic solvents, toxic catalysts, heat, or high pressure. However, copper-free click chemistry has been shown to have favorable reaction rates and orthogonality in water, buffer solutions, and physiological conditions without toxic catalysts. Strain-promoted azide-alkyne cycloaddition and inverse electron-demand Diels-Alder reactions are representative of copper-free click chemistry. Artificial chemical reactions via click chemistry can also be used outside of the laboratory in a controllable manner on live cell surfaces, in the cytosol, and in living bodies. Consequently, copper-free click chemistry has many features that are of interest in biomedical research, and various new materials and strategies for its use have been proposed. Herein, recent remarkable trials that have used copper-free click chemistry are described, focusing on their applications in molecular imaging and therapy. The research is categorized as nanoparticles for drug delivery, imaging agents for cell tracking, and hydrogels for tissue engineering, which are rapidly advancing fields based on click chemistry. The content is based primarily on the experience with click chemistry-based biomaterials over the last 10 years.

Decellularization of Small Intestinal Submucosa

Small intestinal submucosa (SIS) is the most studied extracellular matrix (ECM) for repair and regeneration of different organs and tissues. Promising results of SIS-ECM as a vascular graft, led scientists to examine its applicability for repairing other tissues. Overall results indicated that SIS grafts induce tissue regeneration and remodeling to almost native condition. Investigating immunomodulatory effects of SIS is another interesting field of research. SIS can be utilized in different forms for multiple clinical and experimental studies. The aim of this chapter is to investigate the decellularization process of SIS and its common clinical application.

Preclinical evaluation of methotrexate-loaded polyelectrolyte complexes and thermosensitive hydrogels as treatment for rheumatoid arthritis

This work proposes new methotrexate (MTX) loaded drug delivery systems (DDS) to treat rheumatoid arthritis via the intra-articular route: a poloxamer based thermosensitive hydrogel (MTX-HG), oligochitosan and hypromellose phthalate-based polyelectrolyte complexes (MTX-PEC) and their association (MTX-PEC-HG). MTX-PEC showed 470 ± 166 nm particle size, 0.298 ± 0.108 polydispersity index, +26 ± 2 mV and 74.3 ± 5.8% MTX efficiency entrapment and particle formation was confirmed by infrared spectroscopy and thermal analysis. MTX-HG and MTX-PEC-HG gelled at 36.7°C. MTX drug release profile was prolonged for MTX-HG and MTX-PEC-HG, and faster for MTX-PEC and free MTX. The in vivo effect of the MTX-DDSs systems was evaluated in induced arthritis rats as single intra-articular dose. The assessed parameters were the mechanical nociceptive threshold, the plasmatic IL-1β level and histological analysis of the tibiofemoral joint. MTX-HG and MTX-PEC-HG performance were similar to free MTX and worse than oral MTX, used as positive control. All DDSs showed some irritative effect, for which further studies are required. MTX-PEC was the best treatment on recovering cartilage damage and decreasing allodynia. Thus, MTX-PEC demonstrated potential to treat rheumatoid arthritis, with the possibility of decreasing the systemic exposure to the drug.

Preparation of Electrospun Small Intestinal Submucosa/Poly(caprolactone-co-Lactide-co-glycolide) Nanofiber Sheet as a Potential Drug Carrier

In this work, we chose small intestine submucosa (SIS) as a drug carrier because SIS possesses good biocompatibility, non-immunogenic property and bio-resorbability, and performed electrospinning for preparation of nanofiber sheets (NS). For the preparation of drug-loaded electrospun SIS nanofiber sheets as a drug carrier, we used poly(ε-caprolactone-ran-l-lactide) (PCLA) copolymers to improve the electrospinning performance of SIS. The electrospinning of SIS and PCLA provided the electrospun SIS/PCLA (S/P)-nanofiber sheet (S/P-NS) with adjustable thickness and areas. The electrospun S/P-NS showed different porosities, pore sizes, diameters and tensile strengths depending on the ratios between SIS and PCLA. The electrospun S/P-NS was used as a drug carrier of the dexamethasone (Dex) and silver sulfadiazine (AgS) drug related to anti-inflammation. Dex-loaded S/P-NS and AgS-loaded S/P-NS was successfully fabricated by the electrospinning. In the in vitro and in vivo release, we successfully confirmed the possibility for the sustained release of Dex and AgS from the Dex-S/P-NS and AgS-S/P-NS for three weeks. In addition, the sustained Dex and AgS release suppressed the macrophage infiltration. Collectively, we achieved feasible development of SIS nanofiber sheets for a sustained Dex and AgS delivery system.

An injectable click-crosslinked hyaluronic acid hydrogel modified with a BMP-2 mimetic peptide as a bone tissue engineering scaffold

An injectable, click-crosslinking (Cx) hyaluronic acid (HA) hydrogel scaffold modified with a bone morphogenetic protein-2 (BMP-2) mimetic peptide (BP) was prepared for bone tissue engineering applications. The injectable click-crosslinking HA formulation was prepared from HA-tetrazine (HA-Tet) and HA-cyclooctene (HA-TCO). The Cx-HA hydrogel scaffold was prepared simply by mixing HA-Tet and HA-TCO. The Cx-HA hydrogel scaffold was stable for a longer period than HA both in vitro and in vivo, which was verified via in-vivo fluorescence imaging in real time. BP acted as an osteogenic differentiation factor for human dental pulp stem cells (hDPSCs). After its formation in vivo, the Cx-HA scaffold provided a fine environment for the hDPSCs, and the biocompatibility of the hydrogel scaffold with tissue was good. Like traditional BMP-2, BP induced the osteogenic differentiation of hDPSCs in vitro. The physical properties and injectability of the chemically loaded BP for the Cx-HA hydrogel (Cx-HA-BP) were nearly identical to those of the physically loaded BP hydrogels and the Cx-HA-BP formulation quickly formed a hydrogel scaffold in vivo. The chemically loaded hydrogel scaffold retained the BP for over a month. The Cx-HA-BP hydrogel was better at inducing the osteogenic differentiation of loaded hDPSCs, because it prolonged the availability of BP. In summary, we successfully developed an injectable, click-crosslinking Cx-HA hydrogel scaffold to prolong the availability of BP for efficient bone tissue engineering.

Surface modification of small intestine submucosa in tissue engineering

With the development of tissue engineering, the required biomaterials need to have the ability to promote cell adhesion and proliferation in vitro and in vivo. Especially, surface modification of the scaffold material has a great influence on biocompatibility and functionality of materials. The small intestine submucosa (SIS) is an extracellular matrix isolated from the submucosal layer of porcine jejunum, which has good tissue mechanical properties and regenerative activity, and is suitable for cell adhesion, proliferation and differentiation. In recent years, SIS is widely used in different areas of tissue reconstruction, such as blood vessels, bone, cartilage, bladder and ureter, etc. This paper discusses the main methods for surface modification of SIS to improve and optimize the performance of SIS bioscaffolds, including functional group bonding, protein adsorption, mineral coating, topography and formatting modification and drug combination. In addition, the reasonable combination of these methods also offers great improvement on SIS surface modification. This article makes a shallow review of the surface modification of SIS and its application in tissue engineering.

Substance P-loaded electrospun small intestinal submucosa/poly(ε-caprolactone)-ran-poly(l-lactide) sheet to facilitate wound healing through MSC recruitment

In this work, we prepared an electrospun small intestinal submucosa/poly(ε-caprolactone)-ran-poly(l-lactide) (SIS/PCLA) sheet onto which substance P (SP) was loaded, and this was employed as a cell-free scaffold for wound healing through the mobilization of human mesenchymal stem cells (hMSCs). SP release from the SP-loaded scaffold was 42% at 12 h and 51% at 24 h due to an initial burst of SP, but after 1 day, it exhibited a linear release profile and was released at a sustained rate for 21 days. The SP-loaded SIS/PCLA sheet exhibited higher in vitro and in vivo hMSC migration than did the PCLA and SIS/PCLA sheets. Large hMSCs injected into the tail vein of mice models migrated towards the wound to a greater extent in the presence of the SP-loaded SIS/PCLA sheet than with the PCLA and SIS/PCLA sheets, as confirmed by the CD44 and CD29 markers of recruited hMSCs. In animal wound models, significantly higher wound contraction (∼97%) in the group treated with the SP-loaded SIS/PCLA sheet was observed compared with the PCLA (∼74%) and SIS/PCLA (∼84%) groups at 3 weeks. In addition, SP-loaded SIS/PCLA-treated animals showed significant epidermal regeneration and collagen density (56%) in the mature granulation tissue at 3 weeks compared to the PCLA and SIS/PCLA groups. The wound area after SP-loaded SIS/PCLA sheet treatment also showed high blood vessel formation at the early stage, resulting in enhanced wound healing. Furthermore, the SP-loaded SIS/PCLA group exhibited a lower macrophage count (2.9%) than did the PCLA (7.7%) and SIS/PCLA (3.4%) groups. It was thus confirmed that the use of SP-loaded SIS/PCLA sheet as a cell-free scaffold could effectively enhance wound healing through MSC recruitment.

An Injectable Click-Crosslinked Hydrogel that Prolongs Dexamethasone Release from Dexamethasone-Loaded Microspheres

Our purpose was to test whether a preparation of injectable formulations of dexamethasone (Dex)-loaded microspheres (Dex-Ms) mixed with click-crosslinked hyaluronic acid (Cx-HA) (or Pluronic (PH) for comparison) prolongs therapeutic levels of released Dex. Dex-Ms were prepared using a monoaxial-nozzle ultrasonic atomizer with an 85% yield of the Dex-Ms preparation, encapsulation efficiency of 80%, and average particle size of 57 μm. Cx-HA was prepared via a click reaction between transcyclooctene (TCO)-modified HA (TCO-HA) and tetrazine (TET)-modified HA (TET-HA). The injectable formulations (Dex-Ms/PH and Dex-Ms/Cx-HA) were fabricated as suspensions and became a Dex-Ms-loaded hydrogel drug depot after injection into the subcutaneous tissue of Sprague Dawley rats. Dex-Ms alone also formed a drug depot after injection. The Cx-HA hydrogel persisted in vivo for 28 days, but the PH hydrogel disappeared within six days, as evidenced by in vivo near-infrared fluorescence imaging. The in vitro and in vivo cumulative release of Dex by Dex-Ms/Cx-HA was much slower in the early days, followed by sustained release for 28 days, compared with Dex-Ms alone and Dex-Ms/PH. The reason was that the Cx-HA hydrogel acted as an external gel matrix for Dex-Ms, resulting in the retarded release of Dex from Dex-Ms. Therefore, we achieved significantly extended duration of a Dex release from an in vivo Dex-Ms-loaded hydrogel drug depot formed by Dex-Ms wrapped in an injectable click-crosslinked HA hydrogel in a minimally invasive manner. In conclusion, the Dex-Ms/Cx-HA drug depot described in this work showed excellent performance on extended in vivo delivery of Dex.

Injectable Click-Crosslinked Hyaluronic Acid Depot To Prolong Therapeutic Activity in Articular Joints Affected by Rheumatoid Arthritis

The aim of this study was to design a click-crosslinked hyaluronic acid (HA) (Cx-HA) depot via a click crosslinking reaction between tetrazine-modified HA and trans-cyclooctene-modified HA for direct intra-articular injection into joints affected by rheumatoid arthritis (RA). The Cx-HA depot had significantly more hydrogel-like features and a longer in vivo residence time than the HA depot. Methotrexate (MTX)-loaded Cx-HA (MTX-Cx-HA)-easily prepared as an injectable formulation-quickly formed an MTX-Cx-HA depot that persisted at the injection site for an extended period. In vivo MTX biodistribution in MTX-Cx-HA depots showed that a high concentration of MTX persisted at the intra-articular injection site for an extended period, with little distribution of MTX to normal tissues. In contrast, direct intra-articular injection of MTX alone or MTX-HA resulted in rapid clearance from the injection site. After intra-articular injection of MTX-Cx-HA into rats with RA, we noted the most significant RA reversal, measured by an articular index score, increased cartilage thickness, extensive generation of chondrocytes and glycosaminoglycan deposits, extensive new bone formation in the RA region, and suppression of tumor necrosis factor-α or interleukin-6 expression. Therefore, MTX-Cx-HA injected intra-articularly persists at the joint site in therapeutic MTX concentrations for an extended period, thus increasing the duration of RA treatment, resulting in an improved relief of RA.

Preparation of a Cross-Linked Cartilage Acellular-Matrix Film and Its In Vivo Evaluation as an Antiadhesive Barrier

In this paper, a cartilage acellular-matrix (CAM) is chosen as a biomaterial for an effective antiadhesive barrier to apply between injured tissue and healthy tissues or organs. CAM is cross-linked using glutaraldehyde to create a cross-linked CAM (Cx-CAM) film. Cx-CAM has higher elastic modulus and toughness and more hydrophobic surface properties than CAM before cross-linking. Small intestinal submucosa (SIS), cross-linked SIS (Cx-SIS) as a negative control, and Seprafilm as a positive control are used in an experiment as adhesion barriers. Human umbilical vein endothelial cells (HUVECs) on SIS, Cx-SIS, or in a culture plate get attached and effectively proliferate for 7 days, but Cx-CAM and Seprafilm allow for little or no attachment and proliferation of HUVECs, thus manifesting antiadhesive and antiproliferative effects. In animals with surgical damage to the peritoneal wall and cecum, Cx-CAM and Seprafilm afford little adhesion and negligible inflammation after seven days, as confirmed by hematoxylin and eosin staining and macrophage staining, in contrast to an untreated-injury model, SIS, or Cx-SIS film. Cx-CAM significantly suppresses the formation of blood vessels between the peritoneal wall and cecum, as confirmed by CD31 staining. Overall, the newly designed Cx-CAM film works well as an antiadhesion barrier and has better anti-tissue adhesion efficiency.

Electrostatically Interactive Injectable Hydrogels for Drug Delivery

BACKGROUND

Several injectable hydrogels have been developed extensively for a broad range of biomedical applications. Injectable hydrogels forming in situ through the change in external stimuli have the distinct properties of easy management and minimal invasiveness, and thus provide the advantage of bypassing surgical procedures for administration resulting in better patient compliance.

METHODS

The injectable in situ-forming hydrogels can be formed irreversibly or reversibly under physiological stimuli. Among several external stimuli that induce formation of hydrogels in situ, in this review, we focused on the electrostatic interactions as the most simple and interesting stimulus.

RESULTS

Currently, numerous polyelectrolytes have been reported as potential electrostatically interactive in situ-forming hydrogels. In this review, a comprehensive overview of the rapidly developing electrostatically interactive in situ-forming hydrogels, which are produced by various anionic and cationic polyelectrolytes such as chitosan, celluloses, and alginates, has been outlined and summarized. Further, their biomedical applications have also been discussed.

CONCLUSION

The review concludes with perspectives on the future of electrostatically interactive in situ-forming hydrogels.