Compartmentalized Spherical Collagen Microparticles for Anisotropic Cell Culture Microenvironments

Hydrogel carrier with bubble vibration enhancer for ultrasound-triggered drug release

Hydrogel-based drug carriers provide on-demand drug release via external stimuli. Ultrasound is a promising method because of the potential for remotely releasing the drug. However, intense ultrasound irradiation has been required in previous studies. This paper reports drug model release from hydrogel carriers encapsulating bubble vibration enhancers (BVEs) consisting of microbubbles coated with a lipid membrane. Vibration of BVEs induced by ultrasound stimulation promoted the release of drug models with ultrasound irradiation controlled to a biologically safe acoustic pressure based on spatial-peak temporal-average intensity (ISPTA). The release ratio increased significantly from 2.3 % without BVEs and ultrasound to 10.2 % with both. To evaluate the frequency response, the release ratio was measured at three different ultrasound frequencies (0.3, 1.8, and 2.5 MHz), showing increased efficiency as the frequency approached the resonance frequency of the BVEs. For in vivo applications, hydrogel microspherical carriers with BVEs achieved a 12 % release ratio. Poly-L-lysine coating successfully suppressed the drug release to 0.2 %. The carriers demonstrated repeated responsiveness when ultrasound was applied in three 5-minute intervals. The hydrogel carrier encapsulating BVEs we proposed is a promising in vivo device capable of releasing drugs on demand by ultrasound irradiation based on its high biosafety and acoustic responsiveness.

Chaos-Assisted Production of Micro-Architected Spheres (CAPAS)

Hydrogel droplets with inner compartments are valuable in various fields, including tissue engineering. A droplet-based biofabrication method is presented for the chaos-assisted production of architected spheres (CAPAS) for the rapid generation of multilayered hydrogel spheres (ranging from 0.6 to 3.5 mm in diameter) at high-throughput rates (up to 2000 spheres per min). This method is based on the use of chaotic advection generated by a Kenics static mixer (KSM) nozzle. The configuration of the KSM (i.e., the number of mixing elements) determines the number of compartments within the sphere. Sphere size is adjusted by flow rate, printhead outlet diameter, polymer concentration (sodium alginate or gelatin-methacryloyl (GelMA)), and crosslinking bath composition. This versatile system operates in dripping and jetting modes, preserving multilayered architecture in both modes. Proof-of-concept experiments with breast cancer (MDA-MB-231), human dermal fibroblast (HDF), and murine myoblast (C2C12) lines show over 80% cell viability immediately post-fabrication, maintained over extended culture (14 or 30 days). CAPAS is used to create a breast cancer model with cancer-tissue-like and healthy-tissue-like micro-niches to test paclitaxel doses. It is envisioned that CAPAS will enable high-throughput fabrication of hydrogel spheres for tissue engineering, chemical engineering, and material sciences applications.

Microgels for Cell Delivery in Tissue Engineering and Regenerative Medicine

Microgels prepared from natural or synthetic hydrogel materials have aroused extensive attention as multifunctional cells or drug carriers, that are promising for tissue engineering and regenerative medicine. Microgels can also be aggregated into microporous scaffolds, promoting cell infiltration and proliferation for tissue repair. This review gives an overview of recent developments in the fabrication techniques and applications of microgels. A series of conventional and novel strategies including emulsification, microfluidic, lithography, electrospray, centrifugation, gas-shearing, three-dimensional bioprinting, etc. are discussed in depth. The characteristics and applications of microgels and microgel-based scaffolds for cell culture and delivery are elaborated with an emphasis on the advantages of these carriers in cell therapy. Additionally, we expound on the ongoing and foreseeable applications and current limitations of microgels and their aggregate in the field of biomedical engineering. Through stimulating innovative ideas, the present review paves new avenues for expanding the application of microgels in cell delivery techniques.

Self-Assembly of Platelet Lysates Proteins into Microparticles by Unnatural Disulfide Bonds for Bottom-Up Tissue Engineering

There is a demand to design microparticles holding surface topography while presenting inherent bioactive cues for applications in the biomedical and biotechnological fields. Using the pool of proteins present in human-derived platelet lysates (PLs), the production of protein-based microparticles via a simple and cost-effective method is reported, exploring the prone redox behavior of cysteine (Cy-SH) amino acid residues. The forced formation of new intermolecular disulfide bonds results in the precipitation of the proteins as spherical, pompom-like microparticles with adjustable sizes (15-50 µm in diameter) and surface topography consisting of grooves and ridges. These PL microparticles exhibit extraordinary cytocompatibility, allowing cell-guided microaggregates to form, while also working as injectable systems for cell support. Early studies also suggest that the surface topography provided by these PL microparticles can support osteogenic behavior. Consequently, these PL microparticles may find use to create live tissues via bottom-up procedures or injectable tissue-defect fillers, particularly for bone regeneration, with the prospect of working under xeno-free conditions.

Microfluidic Formulation of Topological Hydrogels for Microtissue Engineering

Microfluidics has recently emerged as a powerful tool in generation of submillimeter-sized cell aggregates capable of performing tissue-specific functions, so-called microtissues, for applications in drug testing, regenerative medicine, and cell therapies. In this work, we review the most recent advances in the field, with particular focus on the formulation of cell-encapsulating microgels of small "dimensionalities": "0D" (particles), "1D" (fibers), "2D" (sheets), etc., and with nontrivial internal topologies, typically consisting of multiple compartments loaded with different types of cells and/or biopolymers. Such structures, which we refer to as topological hydrogels or topological microgels (examples including core-shell or Janus microbeads and microfibers, hollow or porous microstructures, or granular hydrogels) can be precisely tailored with high reproducibility and throughput by using microfluidics and used to provide controlled "initial conditions" for cell proliferation and maturation into functional tissue-like microstructures. Microfluidic methods of formulation of topological biomaterials have enabled significant progress in engineering of miniature tissues and organs, such as pancreas, liver, muscle, bone, heart, neural tissue, or vasculature, as well as in fabrication of tailored microenvironments for stem-cell expansion and differentiation, or in cancer modeling, including generation of vascularized tumors for personalized drug testing. We review the available microfluidic fabrication methods by exploiting various cross-linking mechanisms and various routes toward compartmentalization and critically discuss the available tissue-specific applications. Finally, we list the remaining challenges such as simplification of the microfluidic workflow for its widespread use in biomedical research, bench-to-bedside transition including production upscaling, further in vivo validation, generation of more precise organ-like models, as well as incorporation of induced pluripotent stem cells as a step toward clinical applications.

Microfluidic droplet-based functional materials for cell manipulation

Functional materials from the microfluidic-based droplet community are emerging as enabling tools for various applications in tissue engineering and cell biology. The innovative micro- and nano-scale materials with diverse sizes, shapes and components can be fabricated without the use of complicated devices, allowing unprecedented control over the cells that interact with them. Here, we review the current development of microfluidic-based droplet techniques for creation of functional materials (i.e., liquid droplet, microcapsule, and microparticle). We also describe their various applications for manipulating cell fate and function.

Engineered cell-laden alginate microparticles for 3D culture

Advanced microfabrication technologies and biocompatible hydrogel materials facilitate the modeling of 3D tissue microenvironment. Encapsulation of cells in hydrogel microparticles offers an excellent high-throughput platform for investigating multicellular interaction with their surrounding microenvironment. Compartmentalized microparticles support formation of various unique cellular structures. Alginate has emerged as one of the most dominant hydrogel materials for cell encapsulation owing to its cytocompatibility, ease of gelation, and biocompatibility. Alginate hydrogel provides a permeable physical boundary to the encapsulated cells and develops an easily manageable 3D cellular structure. The interior structure of alginate hydrogel can further regulate the spatiotemporal distribution of the embedded cells. This review provides a specific overview of the representative engineering approaches to generate various structures of cell-laden alginate microparticles in a uniform and reproducible manner. Capillary nozzle systems, microfluidic droplet systems, and non-chip based high-throughput microfluidic systems are highlighted for developing well-regulated cellular structure in alginate microparticles to realize potential drug screening platform and cell-based therapy. We conclude with the discussion of current limitations and future directions for realizing the translation of this technology to the clinic.

Controllable Fabrication of Composite Core-Shell Capsules at a Macroscale as Organoid Biocarriers

The cell encapsulation technology is promising for generation of functional carriers with well-tailored structures for efficient transplantation and immunoprotection of cells/tissues. Stem cell organoids are highly potential for recapitulating the intricate architectures and functionalities of native organs and also providing an unlimited cell source for cellular replacement therapy. However, it remains challenging for loading the organoids with hundreds of micrometers size by current existing cell carriers. Herein, a simple and facile coextrusion strategy is developed for controllable fabrication of Ca-alginate/poly(ethylene imine) (Alg/PEI) macrocapsules for efficient encapsulation and cultivation of organoids. Human-induced pluripotent stem cell (hiPSC)-derived islet organoids are encapsulated in the aqueous compartments of the capsules and immunoisolated by a semipermeable Alg/PEI shell. Via electrostatic interactions, a PEI polyelectrolyte can be incorporated in the shell for restricting its swelling, thus effectively improving the stability of the capsules. The Alg/PEI macrocapsules are featured with desirable selective permeability for immunoisolation of antibodies from reaching the loaded organoids. Meanwhile, they also exhibit excellent permeability for mass transfer due to their well-defined core-shell structure. As such, the encapsulated islet organoids contain islet-specific multicellular components, with high viability and sensitive glucose-stimulated insulin secretion function. The proposed approach provides a versatile encapsulation system for tissue engineering and regenerative medicine applications.

Engineered Microgels-Their Manufacturing and Biomedical Applications

Microgels are hydrogel particles with diameters in the micrometer scale that can be fabricated in different shapes and sizes. Microgels are increasingly used for biomedical applications and for biofabrication due to their interesting features, such as injectability, modularity, porosity and tunability in respect to size, shape and mechanical properties. Fabrication methods of microgels are divided into two categories, following a top-down or bottom-up approach. Each approach has its own advantages and disadvantages and requires certain sets of materials and equipments. In this review, we discuss fabrication methods of both top-down and bottom-up approaches and point to their advantages as well as their limitations, with more focus on the bottom-up approaches. In addition, the use of microgels for a variety of biomedical applications will be discussed, including microgels for the delivery of therapeutic agents and microgels as cell carriers for the fabrication of 3D bioprinted cell-laden constructs. Microgels made from well-defined synthetic materials with a focus on rationally designed ultrashort peptides are also discussed, because they have been demonstrated to serve as an attractive alternative to much less defined naturally derived materials. Here, we will emphasize the potential and properties of ultrashort self-assembling peptides related to microgels.

Dual-functional micro-adsorbents: Application for simultaneous adsorption of cesium and strontium

In current work, Prussian blue (PB)- and hydroxyapatite (HAp)-embedded micro-adsorbents (PB-HAp-MAs) were rationally fabricated through an easy and flexible custom-made micronozzle system as a novel bifunctional adsorbent. The adsorption performance of the as-prepared samples was conducted based on the removal of cesium (Cs⁺) and strontium (Sr²⁺) ions. Adsorption behaviors of the PB-HAp-MAs were also evaluated as function extrusion dimensions and adsorbate concentration. The adsorption isotherm was well fitted by the Langmuir model with adsorption capacities of 24.688 mg g^-1 and 29.254 mg g^-1 for Cs⁺ and Sr²⁺, respectively. Specially, the enhanced adsorption activity can be synergistically attributed to the porous nature of the developed alginate backbone with a high surface area of encapsulated functional nanoparticles, thus leading to rapid saturation within 1 min. In addition, the as-synthesized PB-HAp-MAs were successfully separated from the aqueous solution within 10 s by applying a magnetic field. We expect that our findings will provide valuable guidelines towards developing highly efficient adsorbents for environmental remediation.

Alginate Microencapsulation for Three-Dimensional In Vitro Cell Culture

Advances in microscale 3D cell culture systems have helped to elucidate cellular physiology, understand mechanisms of stem cell differentiation, produce pathophysiological models, and reveal important cell-cell and cell-matrix interactions. An important consideration for such studies is the choice of material for encapsulating cells and associated extracellular matrix (ECM). This Review focuses on the use of alginate hydrogels, which are versatile owing to their simple gelation process following an ionic cross-linking mechanism in situ, with no need for procedures that can be potentially toxic to cells, such as heating, the use of solvents, and UV exposure. This Review aims to give some perspectives, particularly to researchers who typically work more with poly(dimethylsiloxane) (PDMS), on the use of alginate as an alternative material to construct microphysiological cell culture systems. More specifically, this Review describes how physicochemical characteristics of alginate hydrogels can be tuned with regards to their biocompatibility, porosity, mechanical strength, ligand presentation, and biodegradability. A number of cell culture applications are also described, and these are subcategorized according to whether the alginate material is used to homogeneously embed cells, to micropattern multiple cellular microenvironments, or to provide an outer shell that creates a space in the core for cells and other ECM components. The Review ends with perspectives on future challenges and opportunities for 3D cell culture applications.

Fabrication of Artificial Nanobasement Membranes for Cell Compartmentalization in 3D Tissues

In recent decades, tissue engineering techniques have attracted much attention in the construction of 3D tissues or organs. However, even though precise control of cell locations in 3D has been achieved, the organized cell locations are easily destroyed because of the cell migration during the cell culture period. In human body, basement membranes (BMs) maintain the precise cell locations in 3D (compartmentalization). Constructing artificial BMs that mimic the structure and biofunctions of natural BMs remains a major challenge. Here, a nanometer-sized artificial BM through layer-by-layer assembly of collagen type IV (Col-IV) and laminin (LM), chosen because they are the main components of natural BMs, is reported. This multilayered Col-IV/LM nanofilm imitates natural BM structure closely, showing controllable and similar components, thickness, and fibrous network. The Col-IV/LM nanofilms have high cell adhesion properties and maintain the spreading morphology effectively. Furthermore, the barrier effect of preventing cell migration but permitting effective cell-cell crosstalk between fibroblasts and endothelial cells demonstrates the ability of Col-IV/LM nanofilms for cell compartmentalization in 3D tissues, providing more reliable tissue models for evaluating drug efficacy, nanotoxicology, and implantation.

Biopolymer Microparticles Prepared by Microfluidics for Biomedical Applications

Biopolymers are macromolecules that are derived from natural sources and have attractive properties for a plethora of biomedical applications due to their biocompatibility, biodegradability, low antigenicity, and high bioactivity. Microfluidics has emerged as a powerful approach for fabricating polymeric microparticles (MPs) with designed structures and compositions through precise manipulation of multiphasic flows at the microscale. The synergistic combination of materials chemistry afforded by biopolymers and precision provided by microfluidic capabilities make it possible to design engineered biopolymer-based MPs with well-defined physicochemical properties that are capable of enabling an efficient delivery of therapeutics, 3D culture of cells, and sensing of biomolecules. Here, an overview of microfluidic approaches is provided for the design and fabrication of functional MPs from three classes of biopolymers including polysaccharides, proteins, and microbial polymers, and their advances for biomedical applications are highlighted. An outlook into the future research on microfluidically-produced biopolymer MPs for biomedical applications is also provided.

Advanced Bottom-Up Engineering of Living Architectures

Bottom-up tissue engineering is a promising approach for designing modular biomimetic structures that aim to recapitulate the intricate hierarchy and biofunctionality of native human tissues. In recent years, this field has seen exciting progress driven by an increasing knowledge of biological systems and their rational deconstruction into key core components. Relevant advances in the bottom-up assembly of unitary living blocks toward the creation of higher order bioarchitectures based on multicellular-rich structures or multicomponent cell-biomaterial synergies are described. An up-to-date critical overview of long-term existing and rapidly emerging technologies for integrative bottom-up tissue engineering is provided, including discussion of their practical challenges and required advances. It is envisioned that a combination of cell-biomaterial constructs with bioadaptable features and biospecific 3D designs will contribute to the development of more robust and functional humanized tissues for therapies and disease models, as well as tools for fundamental biological studies.

Hydrogel microparticles for biomedical applications

Hydrogel microparticles (HMPs) are promising for biomedical applications, ranging from the therapeutic delivery of cells and drugs to the production of scaffolds for tissue repair and bioinks for 3D printing. Biologics (cells and drugs) can be encapsulated into HMPs of predefined shapes and sizes using a variety of fabrication techniques (batch emulsion, microfluidics, lithography, electrohydrodynamic (EHD) spraying and mechanical fragmentation). HMPs can be formulated in suspensions to deliver therapeutics, as aggregates of particles (granular hydrogels) to form microporous scaffolds that promote cell infiltration or embedded within a bulk hydrogel to obtain multiscale behaviours. HMP suspensions and granular hydrogels can be injected for minimally invasive delivery of biologics, and they exhibit modular properties when comprised of mixtures of distinct HMP populations. In this Review, we discuss the fabrication techniques that are available for fabricating HMPs, as well as the multiscale behaviours of HMP systems and their functional properties, highlighting their advantages over traditional bulk hydrogels. Furthermore, we discuss applications of HMPs in the fields of cell delivery, drug delivery, scaffold design and biofabrication.

Gas-Shearing Fabrication of Multicompartmental Microspheres: A One-Step and Oil-Free Approach

Multicompartmental microparticles (MCMs) have attracted considerable attention in biomedical engineering and materials sciences, as they can carry multiple materials in the separated phases of a single particle. However, the robust fabrication of monodisperse, highly compartmental MCMs at the micro- and nanoscales remains challenging. Here, a simple one-step and oil-free process, based on the gas-flow-assisted formation of microdroplets ("gas-shearing"), is established for the scalable production of monodisperse MCMs. By changing the configuration of the needle system and gas flow in the spray ejector device, the oil-free gas-shearing process easily allows the design of microparticles consisting of two, four, six, and even eight compartments with a precise control over the properties of each compartment. As oils and surfactants are not used, the gas-shearing method is highly cytocompatible. The versatile applications of such MCMs are demonstrated by producing a magnetic microrobot and a biocompatible carrier for the coculturing of cells. This research suggests that the oil-free gas-shearing strategy is a reliable, scalable, and biofriendly process for producing MCMs that may become attractive materials for biomedical applications.