Paper Microfluidics for Cell Analysis

Advances of 3D Cell Co-Culture Technology Based on Microfluidic Chips

Cell co-culture technology aims to study the communication mechanism between cells and to better reveal the interactions and regulatory mechanisms involved in processes such as cell growth, differentiation, apoptosis, and other cellular activities. This is achieved by simulating the complex organismic environment. Such studies are of great significance for understanding the physiological and pathological processes of multicellular organisms. As an emerging cell cultivation technology, 3D cell co-culture technology, based on microfluidic chips, can efficiently, rapidly, and accurately achieve cell co-culture. This is accomplished by leveraging the unique microchannel structures and flow characteristics of microfluidic chips. The technology can simulate the native microenvironment of cell growth, providing a new technical platform for studying intercellular communication. It has been widely used in the research of oncology, immunology, neuroscience, and other fields. In this review, we summarize and provide insights into the design of cell co-culture systems on microfluidic chips, the detection methods employed in co-culture systems, and the applications of these models.

A smartphone serves as a data logger for a fully automated lab-constructed microfluidic system

Fluorescence is an innovative technique that has captivated scholars in recent years due to its superior sensitivity and selectivity. The development of microfluidic components has added to its appeal, particularly given the technology ability to control fluid using very small quantities (microliter range) and achieve high liquid throughput. We have combined these two technologies to develop a lab-constructed simple system for measuring fluorescence, notable for the following features:•The device constructed entirely in our lab and programmed for measuring the fluorescence of liquids using microfluidic technology, delivered excellent results. The regression coefficient R² (0.9995) was obtained five points between 0.001-0.01µg .ml-1. Moreover, the reproducibility standard deviation (%) of 0.008 µg .ml-1 fluorescein dye remained at zero, for ten repeated experiments.•The device was full automated using a smartphone as a data logger, and lab-constructed programs.•The results were satisfactory with a detection limit of 1 × 10-4 µg.ml-1. This proposed system can measure over 200 samples per hour making it highly efficient and eco-friendly due to the reduced use of reagents and lower waste production. The fully automated system can effectively be used to determine fluorescein dye concentrations. Another application (micro pump view) manages all actions required in this microfluidic system, such as operating the two lab-constructed peristaltic pumps.

Microfluidic systems for infectious disease diagnostics

Microorganisms, encompassing both uni- and multicellular entities, exhibit remarkable diversity as omnipresent life forms in nature. They play a pivotal role by supplying essential components for sustaining biological processes across diverse ecosystems, including higher host organisms. The complex interactions within the human gut microbiota are crucial for metabolic functions, immune responses, and biochemical signalling, particularly through the gut-brain axis. Viruses also play important roles in biological processes, for example by increasing genetic diversity through horizontal gene transfer when replicating inside living cells. On the other hand, infection of the human body by microbiological agents may lead to severe physiological disorders and diseases. Infectious diseases pose a significant burden on global healthcare systems, characterized by substantial variations in the epidemiological landscape. Fast spreading antibiotic resistance or uncontrolled outbreaks of communicable diseases are major challenges at present. Furthermore, delivering field-proven point-of-care diagnostic tools to the most severely affected populations in low-resource settings is particularly important and challenging. New paradigms and technological approaches enabling rapid and informed disease management need to be implemented. In this respect, infectious disease diagnostics taking advantage of microfluidic systems combined with integrated biosensor-based pathogen detection offers a host of innovative and promising solutions. In this review, we aim to outline recent activities and progress in the development of microfluidic diagnostic tools. Our literature research mainly covers the last 5 years. We will follow a classification scheme based on the human body systems primarily involved at the clinical level or on specific pathogen transmission modes. Important diseases, such as tuberculosis and malaria, will be addressed more extensively.

Integrated Microwell Array-Based Microfluidic Chip with a Hand-Held Smartphone-Controlled Device for Nucleic Acid Detection

In this study, we designed a highly integrated microfluidic chip for nucleic acid extraction, amplification, and detection. Magnetic beads, which are used to capture nucleic acids on the chip, are trapped in the microwell arrays in a one-well-one-bead manner after local surface modification of the inner faces of the microwells. On-chip liquid introduction, delivery, and mixing are all carried out manually with one syringe and no other equipment. A hand-held device with precise temperature control and high-quality imaging is developed, which is only 2.3 cubic decimeters in volume and 1.2 kg in weight. Via the use of the Internet for wireless communication, the experiment and data analysis after inserting the chip into the device can be conducted by a smartphone anywhere there is an Internet connection. We carried out reverse transcription loop-mediated isothermal amplification (RT-LAMP) on the chip with the hand-held device. SARS-CoV-2 pseudoviruses are extracted, reverse transcribed, amplified, and detected on the chip with the hand-held device with satisfactory results. Thus, a highly integrated, easy-to-operate, and rapid nucleic acid detection microfluidic chip with a hand-held smartphone-controlled device is proposed, and this new platform for nucleic acid detection shows great potential for mobile point-of-care testing (POCT).

Bio-inspired microfluidics: A review

Biomicrofluidics, a subdomain of microfluidics, has been inspired by several ideas from nature. However, while the basic inspiration for the same may be drawn from the living world, the translation of all relevant essential functionalities to an artificially engineered framework does not remain trivial. Here, we review the recent progress in bio-inspired microfluidic systems via harnessing the integration of experimental and simulation tools delving into the interface of engineering and biology. Development of "on-chip" technologies as well as their multifarious applications is subsequently discussed, accompanying the relevant advancements in materials and fabrication technology. Pointers toward new directions in research, including an amalgamated fusion of data-driven modeling (such as artificial intelligence and machine learning) and physics-based paradigm, to come up with a human physiological replica on a synthetic bio-chip with due accounting of personalized features, are suggested. These are likely to facilitate physiologically replicating disease modeling on an artificially engineered biochip as well as advance drug development and screening in an expedited route with the minimization of animal and human trials.

Porous Structural Microfluidic Device for Biomedical Diagnosis: A Review

Microfluidics has recently received more and more attention in applications such as biomedical, chemical and medicine. With the development of microelectronics technology as well as material science in recent years, microfluidic devices have made great progress. Porous structures as a discontinuous medium in which the special flow phenomena of fluids lead to their potential and special applications in microfluidics offer a unique way to develop completely new microfluidic chips. In this article, we firstly introduce the fabrication methods for porous structures of different materials. Then, the physical effects of microfluid flow in porous media and their related physical models are discussed. Finally, the state-of-the-art porous microfluidic chips and their applications in biomedicine are summarized, and we present the current problems and future directions in this field.

Novel Pumping Methods for Microfluidic Devices: A Comprehensive Review

This review is an account of methods that use various strategies to control microfluidic flow control with high accuracy. The reviewed systems are divided into two large groups based on the way they create flow: passive systems (non-mechanical systems) and active (mechanical) systems. Each group is presented by a number of device fabrications. We try to explain the main principles of operation, and we list advantages and disadvantages of the presented systems. Mechanical systems are considered in more detail, as they are currently an area of increased interest due to their unique precision flow control and "multitasking". These systems are often applied as mini-laboratories, working autonomously without any additional operations, provided by humans, which is very important under complicated conditions. We also reviewed the integration of autonomous microfluidic systems with a smartphone or single-board computer when all data are retrieved and processed without using a personal computer. In addition, we discuss future trends and possible solutions for further development of this area of technology.

Tuning the Structure, Conductivity, and Wettability of Laser-Induced Graphene for Multiplexed Open Microfluidic Environmental Biosensing and Energy Storage Devices

The integration of microfluidics and electrochemical cells is at the forefront of emerging sensors and energy systems; however, a fabrication scheme that can create both the microfluidics and electrochemical cells in a scalable fashion is still lacking. We present a one-step, mask-free process to create, pattern, and tune laser-induced graphene (LIG) with a ubiquitous CO₂ laser. The laser parameters are adjusted to create LIG with different electrical conductivity, surface morphology, and surface wettability without the need for postchemical modification. Such definitive control over material properties enables the creation of LIG-based integrated open microfluidics and electrochemical sensors that are capable of dividing a single water sample along four multifurcating paths to three ion selective electrodes (ISEs) for potassium (K⁺), nitrate (NO₃^-), and ammonium (NH₄⁺) monitoring and to an enzymatic pesticide sensor for organophosphate pesticide (parathion) monitoring. The ISEs displayed near-Nernstian sensitivities and low limits of detection (LODs) (10^-5.01 M, 10^-5.07 M, and 10^-4.89 M for the K⁺, NO₃^-, and NH₄⁺ ISEs, respectively) while the pesticide sensor exhibited the lowest LOD (15.4 pM) for an electrochemical parathion sensor to date. LIG was also specifically patterned and tuned to create a high-performance electrochemical micro supercapacitor (MSC) capable of improving the power density by 2 orders of magnitude compared to a Li-based thin-film battery and the energy density by 3 orders of magnitude compared to a commercial electrolytic capacitor. Hence, this tunable fabrication approach to LIG is expected to enable a wide range of real-time, point-of-use health and environmental sensors as well as energy storage/harvesting modules.

Eco-Friendly Superhydrophobic Composites with Thermostability, UV Resistance, and Coating Transparency

Despite the market demand for biofiber assemblies endowed with superhydrophobicity being huge, the current approaches to their production are complicated, time-consuming, and even pose a serious threat to the environment. Here, we report a simple surface treatment strategy to prepare environmentally friendly superhydrophobic biofiber composites. The obtained samples have certain UV resistance properties, which are mainly determined by the titanium dioxide (TiO₂) dosage. Additionally, the sample has excellent thermal stability, and the contact angle is maintained at 153.26° after heat treatment at 140 °C for 1 h. Quite encouragingly, thermal annealing of samples can transform translucent coatings into transparent structures and increase the tensile strength. The results also showed that this strategy could be integrated into the mass production process of other biofiber components as coating, such as coated paper, pulp boards, cotton gauzes, tissues, and so forth. Due to the facile preparation and environment-friendliness, this sustainable paper-based product can be used in diversified applications: packaging and storage of liquid food, protection of ancient books, UV- and rain-proof materials, and teaching demonstrations relevant to bionics, among others.

Hand-Powered Inertial Microfluidic Syringe-Tip Centrifuge

Conventional sample preparation techniques require bulky and expensive instruments and are not compatible with next-generation point-of-care diagnostic testing. Here, we report a manually operated syringe-tip inertial microfluidic centrifuge (named i-centrifuge) for high-flow-rate (up to 16 mL/min) cell concentration and experimentally demonstrate its working mechanism and performance. Low-cost polymer films and double-sided tape were used through a rapid nonclean-room process of laser cutting and lamination bonding to construct the key components of the i-centrifuge, which consists of a syringe-tip flow stabilizer and a four-channel paralleled inertial microfluidic concentrator. The unstable liquid flow generated by the manual syringe was regulated and stabilized with the flow stabilizer to power inertial focusing in a four-channel paralleled concentrator. Finally, we successfully used our i-centrifuge for manually operated cell concentration. This i-centrifuge offers the advantages of low device cost, simple hand-powered operation, high-flow-rate processing, and portable device volume. Therefore, it holds potential as a low-cost, portable sample preparation tool for point-of-care diagnostic testing.

Electricity-free hand-held inertial microfluidic sorter for size-based cell sorting

Conventional batch-top cell sorters are often bulky and expensive, and miniaturized microfluidic sorters available mostly require field generators and electricity-powered pumping systems. Therefore, the development of a low-cost, portable cell sorter that can be used in low resource settings is essential. In this study, we propose such an electricity-free hand-held inertial microfluidic sorter that can be used for the high-efficiency sorting of differently sized cells in a continuous and passive manner. The proposed hand-held sorter is composed of a wheel-shaped all-in-one syringe inertial microfluidic sorter (i-sorter) with flow stabilizer units and two spring-driven mechanical syringe drivers. The release of the compression spring in the mechanical syringe driver through a one-click operation provides the flow driving force. Passive flow stabilizer units in the i-sorter enable flow-rate-sensitive inertial cell separation for the unstable driving flow rate generated by the low-cost mechanical syringe driver. We successfully achieved sorting of differently sized particles and high-efficiency separation of rare tumor cells from the blood using the fabricated prototype. Our hand-held inertial microfluidic cell sorter has many advantages, including low device cost, simple electricity-free operation, compactness, and portability; additionally, samples do not need to be pre-labelled. Therefore, it has potential for use in low-resource settings.

Dynamic pH and Thermal Analysis of Paper-Based Microchip Electrophoresis

Paper-based microchip electrophoresis has the potential to bring laboratory electrophoresis tests to the point of need. However, high electric potential and current values induce pH and temperature shifts, which may affect biomolecule electrophoretic mobility thus decrease test reproducibility and accuracy of paper-based microfluidic electrophoresis. We have previously developed a microchip electrophoresis system, HemeChip, which has the capability of providing low-cost, rapid, reproducible, and accurate point-of-care (POC) electrophoresis tests for hemoglobin analysis. Here, we report the methodologies we implemented for characterizing HemeChip system pH and temperature during the development process, including utilizing commercially available universal pH indicator and digital camera pH shift characterization, and infrared camera characterizing temperature shift characterization. The characterization results demonstrated that pH shifts up to 1.1 units, a pH gradient up to 0.11 units/mm, temperature shifts up to 40 °C, and a temperature gradient up to 0.5 °C/mm existed in the system. Finally, we report an acid pre-treatment of the separation media, a cellulose acetate paper, mitigated both pH and temperature shifts and provided a stable environment for reproducible HemeChip hemoglobin electrophoresis separation.

A novel method for fabrication of paper-based microfluidic devices using BSA-ink

This paper describes the fabrication of paper-based microfluidic devices using a novel, inexpensive ink composed of bovine serum albumin (BSA), utilizing BSA's thermal denaturation and aggregation to create a hydrophobic barrier on Whatman® Grade 4 filter paper. A 20% aqueous solution of BSA was inked onto the paper using a pen plotter at moderate speed (5 cm/s) with desired shape and size followed by heating at 80 °C to denature the BSA leading to hydrophobic barriers formation, whereas below 80 °C the barrier layer is prone to collapse. The minimum line gap and line width of ~1 mm and ~1.3 mm were achieved. Finally, a proof-of-concept glucose sensing was shown while addressing the issue of the coffee ring effect using the biopolymer NanoCheck-ATH® from ChitoLytic Inc. The glucose concentration limit of detection (LOD) as low as 0.2 mg/mL was estimated. The developed technique offers ease of fabrication, high reproducibility, cost-effectiveness, and is environmentally friendly.

The Present and Future Role of Microfluidics for Protein and Peptide-Based Therapeutics and Diagnostics

The implementation of peptide-based molecules within the medical field has vast potential, owing to their unique nature and predictable physicochemical profiles. However, peptide therapeutic usage is hindered by delivery-related challenges, meaning that their formulations must be altered to overcome these limitations. This process could be propelled by applying microfluidics (MFs) due to its highly controllable and adaptable attributes; however, therapeutic research within this field is extremely limited. Peptides possess multifunctional roles within therapeutic formulations, ranging from enhancing target specificity to acting as the active component of the medicine. Diagnostically, MFs are well explored in the field of peptides, as MFs provide an unsullied platform to provide fast yet accurate examinations. The capacity to add attributes, such as integrated sensors and microwells, to the MF chip, only enhances the attractiveness of MFs as a diagnostic platform. The structural individuality of peptides makes them prime candidates for diagnostic purposes, for example, antigen detection and isolation. Therefore, this review provides a useful insight into the current applications of MFs for peptide-based therapy and diagnostics and highlights potential gaps in the field that are yet to be explored or optimized.

Hemp-Based Microfluidics

Hemp is a sustainable, recyclable, and high-yield annual crop that can be used to produce textiles, plastics, composites, concrete, fibers, biofuels, bionutrients, and paper. The integration of microfluidic paper-based analytical devices (µPADs) with hemp paper can improve the environmental friendliness and high-throughputness of µPADs. However, there is a lack of sufficient scientific studies exploring the functionality, pros, and cons of hemp as a substrate for µPADs. Herein, we used a desktop pen plotter and commercial markers to pattern hydrophobic barriers on hemp paper, in a single step, in order to characterize the ability of markers to form water-resistant patterns on hemp. In addition, since a higher resolution results in densely packed, cost-effective devices with a minimized need for costly reagents, we examined the smallest and thinnest water-resistant patterns plottable on hemp-based papers. Furthermore, the wicking speed and distance of fluids with different viscosities on Whatman No. 1 and hemp papers were compared. Additionally, the wettability of hemp and Whatman grade 1 paper was compared by measuring their contact angles. Besides, the effects of various channel sizes, as well as the number of branches, on the wicking distance of the channeled hemp paper was studied. The governing equations for the wicking distance on channels with laser-cut and hydrophobic side boundaries are presented and were evaluated with our experimental data, elucidating the applicability of the modified Washburn equation for modeling the wicking distance of fluids on hemp paper-based microfluidic devices. Finally, we validated hemp paper as a substrate for the detection and analysis of the potassium concentration in artificial urine.

Label-Free, High-Throughput Assay of Human Dendritic Cells from Whole-Blood Samples with Microfluidic Inertial Separation Suitable for Resource-Limited Manufacturing

Microfluidics technology has not impacted the delivery and accessibility of point-of-care health services, like diagnosing infectious disease, monitoring health or delivering interventions. Most microfluidics prototypes in academic research are not easy to scale-up with industrial-scale fabrication techniques and cannot be operated without complex manipulations of supporting equipment and additives, such as labels or reagents. We propose a label- and reagent-free inertial spiral microfluidic device to separate red blood, white blood and dendritic cells from blood fluid, for applications in health monitoring and immunotherapy. We demonstrate that using larger channel widths, in the range of 200 to 600 µm, allows separation of cells into multiple focused streams, according to different size ranges, and we utilize a novel technique to collect the closely separated focused cell streams, without constricting the channel. Our contribution is a method to adapt spiral inertial microfluidic designs to separate more than two cell types in the same device, which is robust against clogging, simple to operate and suitable for fabrication and deployment in resource-limited populations. When tested on actual human blood cells, 77% of dendritic cells were separated and 80% of cells remained viable after our assay.

Hybrid Three Dimensionally Printed Paper-Based Microfluidic Platform for Investigating a Cell's Apoptosis and Intracellular Cross-Talk

In this paper, we first proposed a novel hybrid three-dimensional (3D) printed and paper-based microfluidic platform and applied it for investigating the cell's apoptosis and intracellular cross-talk. The fabrication of a 3D-printed microfluidic chip is much easier than polydimethylsiloxane (PDMS) chip and can be applied in many common labs without soft lithogrophy fabrication equipment. Moreover, 3D printing can be perfectly combined with paper-based chips that can provide 3D scaffold for cell culture and analysis. In addition, these paper chips are disposable after use, greatly reducing the experimental cost. We integrated "Christmas Tree" structure with the top layer of the 3D-printed microfluidic chip to generate a continuous concentration gradient, and the bottom layer contained paper-based chips as cell culture area. The two-layer structure allows the concentration gradient forming layer to be separated from the cell culture layer, which can simplify the planting of cells in the microfluidic chip and make sure the cells stay in the culture chambers and don't clog the microfluidic channels. Applying this hybrid platform, we examined the effect of H₂S on cancer cells. Continuous exposure to a low concentration of H₂S inhibited cancer cell SMMC-7721 proliferation by inducing cell apoptosis. We also found that two gaseous molecules H₂S and NO have cross-talk in cancer cells; they formed bioactive intermediate polysulfides in cancer cells. It is expected that this novel hybrid 3D-printed and paper-based microfluidic platform will have widespread application prospects in cell investigation.

ATP-responsive mitochondrial probes for monitoring metabolic processes of glioma stem cells in a 3D model

The metastatic cascade of cancer stem cells (CSCs) is always accompanied by elevated levels of adenosine triphosphate (ATP) as well as the alterntion of energy metabolism to support their differentiation and migration. Here we propose a 3D microfluidic tumor model coupled with an ATP-responsive mitochondrial probe (AMP) for investigation of metabolic processes of glioma stem cells (GSCs). The 3D tumor model has a middle matrix gel microchannel mimicking the extracellular matrix (ECM), which is sandwiched between a GSC culture chamber and a stimulation chamber. The AMPs consist of structure-switching ATP aptamers and triphenylphosphonium (TPP)-conjugated peptide nucleic acids (PNAs). Under TGF-β stimulation, invasive migration of GSCs accompanied by a high ATP level and spindle mesenchymal morphologies is observed due to the epithelial-to-mesenchymal transition (EMT). Moreover, acidic stress can keep GSCs in a low-energy state, while long-term low pH stimulation screens out more malignant glioma cells. This AMP-assisted 3D microfluidic tumor model provides a tremendous opportunity for studying the biological properties of CSCs.

Desktop Fabrication of Lab-On-Chip Devices on Flexible Substrates: A Brief Review

Flexible microfluidic devices are currently in demand because they can be mass-produced in resource-limited settings using simple and inexpensive fabrication tools. Finding new ways to fabricate microfluidic platforms on flexible substrates has been a hot area. Integration of customized detection tools for different lab-on-chip applications has made this area challenging. Significant advancements have occurred in the area over the last decade; therefore, there is a need to review such interesting fabrication tools employed on flexible substrates, such as paper and plastics. In this short review, we review individual fabrication tools and their combinations that have been used to develop such platforms in the past five years. These tools are not only simple and low-cost but also require minimal skills for their operation. Moreover, key examples of plastic-based flexible substrates are also presented, because a diverse range of plastic materials have prevailed recently for a variety of lab-on-chip applications. This review should attract audience of various levels, i.e., from hobbyists to scientists, and from high school students to postdoctoral researchers, to produce their own flexible devices in their own settings.

Microfluidic technology for investigation of protein function in single adherent cells

Instrumental techniques and associated methods for single cell analysis, designed to investigate and measure a broad range of cellular parameters in search of unique features, address key limitations of conventional cell-based assays with their ensemble average response. While many different single cell techniques exist for suspension cultures, which can process and characterize large numbers of individual cells in rapid succession, the access to surface-immobilized cells in typical 2D and 3D culture environments remains challenging. Open space microfluidics has created new possibilities in this area, allowing for exclusive access to single cells in adherent cultures, even at high confluency. In this chapter, we briefly review new microtechnologies for the investigation of protein function in single adherent cells, and present an overview over related recent applications of the multifunctional pipette (Biopen), a microfluidic multi-solution dispensing system that uses hydrodynamic confinement in open volume environments in order to establish a superfusion zone over selected single cells in adherent cultures.

Transparent cellulose nanofiber based open cell culture platform using matrix-assisted 3D printing

Carboxymethylated hydrophilic CNF (Hphil-CNF) was modified with methyltrimethoxysilane into hydrophobic CNF (Hphob-CNF) and used as a printing matrix. The Hphil-CNF hydrogel was printed at the surface of the Hphob-CNF hydrogel, forming an immiscible, distinct 3D structure. Fabrication of channel systems in the CNF platform was performed by matrix-assisted 3D printing of petroleum jelly ink in the Hphil-CNF-patterned Hphob-CNF hydrogel. After the dehydration process followed by removal of the ink from the CNF film, the CNF hydrogels became a dense platform embedding fluidic channels. The CNF platform exhibited selective diffusion of fluorescein isothiocyanate-dextran from the channels in the Hphil-CNF patterns, indicating transport of bioactive molecules to cells cultured at the platform surface. The applicability of the open cell culture platform was investigated with A549 lung cancer cells by injecting cisplatin, a model drug into the channel.

Recent advances in microfluidic platforms for single-cell analysis in cancer biology, diagnosis and therapy

Understanding molecular, cellular, genetic and functional heterogeneity of tumors at the single-cell level has become a major challenge for cancer research. The microfluidic technique has emerged as an important tool that offers advantages in analyzing single-cells with the capability to integrate time-consuming and labour-intensive experimental procedures such as single-cell capture into a single microdevice at ease and in a high-throughput fashion. Single-cell manipulation and analysis can be implemented within a multi-functional microfluidic device for various applications in cancer research. Here, we present recent advances of microfluidic devices for single-cell analysis pertaining to cancer biology, diagnostics, and therapeutics. We first concisely introduce various microfluidic platforms used for single-cell analysis, followed with different microfluidic techniques for single-cell manipulation. Then, we highlight their various applications in cancer research, with an emphasis on cancer biology, diagnosis, and therapy. Current limitations and prospective trends of microfluidic single-cell analysis are discussed at the end.

Electrophoretic Separation on an Origami Paper-Based Analytical Device Using a Portable Power Bank

The electrophoresis of ampholytes such as amino acids on a paper device is difficult because of the variation of pH distribution in time. On the basis of this observation, we propose a paper-based analytical device (PAD) with origami structure. By folding a filter paper, a low operation voltage of 5 V was achieved, where the power was supplied by a 5 V 1.5 A portable power bank through the USB type A receptacle. As a demonstration, we carried out the electrophoretic separation of pI markers (pI 5.5 and 8.7). The separation was achieved within 4 min before the pH distribution on the paper varied. Though the separation distance was small, it could be increased by expanding the origami structure. This result indicates that our proposed PAD is useful for electrophoretic separation on a paper device.