Liquid Copolymers as Biodegradable Surgical Sealant

Bioadhesive microneedle patches for tissue sealing

Sealing of soft tissues prevents leakage of gas and liquid, closes wounds, and promotes healing and is, therefore, of great significance in the clinical and medical fields. Although various formulations have been developed for reliable sealing of soft tissue, tradeoffs between adhesive properties, degradation profile, and tissue toxicity limit their clinical use. Hydrogel-based adhesives, for example, are highly biocompatible but adhere very weakly to the tissue and degrade quickly, while oxidized cellulose patches are poorly absorbed and may cause healing complications postoperatively. Here, we present a novel strategy for tissue sealing based on bioadhesive microneedle patches that can spontaneously adhere to tissue surface through electrostatic interactions and swell within it. A series of microneedle patches made of pullulan, chitosan, Carbopol, poly (lactic-co-glycolic acid), and a Carbopol/chitosan combination were fabricated and characterized for their use in tissue sealing. The effect of microneedle composition on the fabrication process, physical and mechanical properties, in vitro cytotoxicity, and in vivo biocompatibility were examined. The needle structure enables microneedles to strongly fix onto various tissues via physical interlocking, while their adhesive properties improve staying time and sealing capabilities. The microneedle patch comprising Carbopol needles and chitosan as a second pedestal layer presented the best results in terms of sealing and adhesion, a consequence of the needle's swelling and adhesion features combined with the supportive chitosan base layer. Finally, single Carbopol/chitosan patches stopped intense liver bleeding in a rat model significantly quicker and with less blood loss compared with commercial oxidized cellulose patches. These microneedles can be considered a promising cost-effective platform for adhering and sealing tissues as they can be applied quickly and painlessly, and require less trained medical staff and equipment.

The healing capacity and osteogenesis pattern of demineralized dentin matrix (DDM)-fibrin glue (FG) compound

Demineralized dentin matrix (DDM) is an osteoconductive and osteoinductive material that has been successfully used in sinus floor augmentation and alveolar ridge augmentation in clinical applications. It releases bone morphogenetic proteins (BMPs) and other growth factors, making DDM a suitable grafting material. However, the granular particle of DDM makes it difficult to anchor into the bone defect area. The aim of this study was to investigate the biological effects and osteoinductivity of the combination of DDM and Fibrin Glue (FG) at an optimal ratio on bone healing from a critical bone defect in an animal model. The mouse osteoblastic cell line (MC3T3-E1) was co-cultured with various ratios of DDM and FG to examine their effects on osteoblast proliferation and differentiation, as indicated by alkaline phosphatase (ALP) activity, osteocalcin (OC) production and mineralized nodules formation. The optimal ratio was then chosen for further study with a rabbit calvarial defective model, in which they were implanted with DDM or DDM-FG1 (1 g: 0.1 ml) and DDM-FG2 (1 g: 0.5 ml) compounds, or left blank for 2, 4, 8 and 12 weeks to investigate soft tissue and new bone regeneration. Micro-CT and histology analysis were used to evaluate the total grafting properties according to the different healing periods. The result from in vitro studies demonstrated that the ratio of 1:0.1 induced more ALP activity and mineralized nodules, while the ratio of 1: 0.5 (DDM-FG combined) induced more osteocalcin (OC) at specific time points. In the animal model, the 3D new bone volume in all DDM-FG treatment groups was significantly greater than that in the blank group at 2, 4, 8 and 12 weeks. Furthermore, the new bone volume was greater in DDM-FG2 when compared to the other groups during the early weeks of the healing period. In histological analysis, clusters of osteoblasts were formed adjacent to the DDM particles, and newly formed bone was observed in all groups, suggesting an osteoinductive property of DDM. Moreover, the greater new collagen synthesis observed at 4 weeks suggested that early bone healing was induced in the DDM-FG2 group. This study demonstrated that at an optimal ratio, the DDM-FG compound enhances osteogenic activities and bone regeneration.

Polymer nanomaterials for use as adjuvant surgical tools

Materials employed in the treatment of conditions encountered in surgical and clinical practice frequently face barriers in translation to application. Shortcomings can be generalized through their reduced mechanical stability, difficulty in handling, and inability to conform or adhere to complex tissue surfaces. To overcome an amalgam of challenges, research has sought the utilization of polymer-derived nanomaterials deposited in various fashions and formulations to improve the application and outcomes of surgical and clinical interventions. Clinically prevalent applications include topical wound dressings, tissue adhesives, surgical sealants, hemostats, and adhesion barriers, all of which have displayed the potential to act as superior alternatives to current materials used in surgical procedures. In this review, emphasis will be placed not only on applications, but also on various design strategies employed in fabrication. This review is designed to provide a broad and thought-provoking understanding of nanomaterials as adjuvant tools for the assisted treatment of pathologies prevalent in surgery. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanoscale Tools and Techniques in Surgery.

Progress of tissue adhesives based on proteins and synthetic polymers

In recent years, polymer-based tissue adhesives (TAs) have been developed as an alternative to sutures to close and seal incisions or wounds owing to their ease of use, rapid application time, low cost, and minimal tissue damage. Although significant research is being conducted to develop new TAs with improved performances using different strategies, the applications of TAs are limited by several factors, such as weak adhesion strength and poor mechanical properties. Therefore, the next-generation advanced TAs with biomimetic and multifunctional properties should be developed. Herein, we review the requirements, adhesive performances, characteristics, adhesive mechanisms, applications, commercial products, and advantages and disadvantages of proteins- and synthetic polymer-based TAs. Furthermore, future perspectives in the field of TA-based research have been discussed.

An Adhesive/Anti-Adhesive Janus Tissue Patch for Efficient Closure of Bleeding Tissue with Inhibited Postoperative Adhesion

Most of the current bioadhesives cannot perform well on bleeding tissues while postoperative adhesion is a general but serious clinical issue. Here, a three-layer biodegradable Janus tissue patch (J-TP) that is able to simultaneously enable efficient closure of bleeding wounds with significantly promoted clotting ability and suppressed postoperative adhesion of tissues is reported. A dry adhesive hydrogel bottom layer of the J-TP can form rapid (within 15 s) and strong (tensile strength up to 98 kPa) adhesion to bleeding/wet tissues with high bursting pressure (about 312.5 mmHg on a sealed porcine skin) through hydrogen binding and covalent conjugation between the carboxyl & N-hydroxy succinimide (NHS) groups of hydrogel and the primary amine groups of tissues, while the phosphonic motifs can significantly reduce blood loss (by 81% on a rat bleeding liver model) of bleeding wounds. A thin polylactic acid (PLA) middle layer can improve the tensile strength (by 132%) of the J-TP in wet conditions while the grafted zwitterionic polymers can effectively prevent postoperative tissue adhesion and inflammatory reaction. This J-TP may be a promising tissue patch to assist the clinical treatment of injured bleeding tissues with inhibited postoperative adhesion.

Elastomeric, bioadhesive and pH-responsive amphiphilic copolymers based on direct crosslinking of poly(glycerol sebacate)-co-polyethylene glycol

Poly(glycerol sebacate) (PGS), a synthetic biorubber, is characterised by its biocompatibility, high elasticity and tunable mechanical properties; however, its inherent hydrophobicity and insolubility in water make it unsuitable for use in advanced biomaterials like hydrogels fabrication. Here, we developed new hydrophilic PGS-based copolymers that enable hydrogel formation through use of two different types of polyethylene glycol (PEG), polyethylene glycol (PEG2) or glycerol ethoxylate (PEG3), combined at different ratios. A two-step polycondensation reaction was used to produce poly(glycerol sebacate)-co-polyethylene glycol (PGS-co-PEG) copolymers that were then crosslinked thermally without the use of initiators or crosslinkers, resulting in PGS-co-PEG2 and PGS-co-PEG3 amphiphilic polymers. It has been illustrated that the properties of PGS-co-PEG copolymers can be controlled by altering the type and amount of PEG. PGS-co-PEG copolymers containing PEG ≥ 40% showed high swelling, flexibility, stretching, bioadhesion and biocompatibility, and good enzymatic degradation and mechanical properties. Also, the addition of PEG created hydrogels that demonstrated pH-responsive behaviours, which can be used for bioapplications requiring responding to physicochemical dynamics. Interestingly, PGS-co-40PEG2 and PGS-co-60PEG3 had the highest shear strengths, 340.4 ± 49.7 kPa and 336.0 ± 35.1 kPa, and these are within the range of commercially available sealants or bioglues. Due to the versatile multifunctionalities of these new copolymer hydrogels, they can have great potential in soft tissue engineering and biomedicine.

Bio-based and bio-inspired adhesives from animals and plants for biomedical applications

With the "many-headed" slime mold Physarum polycelphalum having been voted the unicellular organism of the year 2021 by the German Society of Protozoology, we are reminded that a large part of nature's huge variety of life forms is easily overlooked - both by the general public and researchers alike. Indeed, whereas several animals such as mussels or spiders have already inspired many scientists to create novel materials with glue-like properties, there is much more to discover in the flora and fauna. Here, we provide an overview of naturally occurring slimy substances with adhesive properties and categorize them in terms of the main chemical motifs that convey their stickiness, i.e., carbohydrate-, protein-, and glycoprotein-based biological glues. Furthermore, we highlight selected recent developments in the area of material design and functionalization that aim at making use of such biological compounds for novel applications in medicine - either by conjugating adhesive motifs found in nature to biological or synthetic macromolecules or by synthetically creating (multi-)functional materials, which combine adhesive properties with additional, problem-specific (and sometimes tunable) features.