Regulable Polyelectrolyte-Surfactant Complex for Antibacterial Biomedical Catheter Coating via a Readily Scalable Route

Antimicrobial Silicon Rubber Crosslinked with Bornyl-Siloxane

Silicone rubber (SiR) has a wide range of medical applications, but it lacks antimicrobial properties, leading to potential infection issues with related implants or medical devices. Most studies focus on adding anti-bacterial agents or surface modification, which usually result in composites with anti-bacterial properties, rather than synthesizing SiR with intrinsically antimicrobial performances. To tackle this issue, a double substituted bornyl-siloxane crosslinker (BC) is designed. This crosslinker can react with hydroxy-terminated polydimethylsiloxane (PDMS) at room temperature to yield SiR with borneol side groups. The process is simple without using additional solvents. Antimicrobial assay on SiR cured with different ratios of BC/PDMS showed that 20 wt.% BC cross-linked network exhibited outstanding anti-bacterial adhesion (Escherichia coli 99.4%, Staphylococcus aureus 97.3%) performance and long-lasting anti-mold (Aspergillus niger over 99% for 30 days) adhesion properties. Moreover, the subcutaneous implantation model in mice demonstrated its excellent anti-infection, biocompatibility and safety. Therefore, this material is promising for widespread adoption in the medical field, especially in silicon-based products or coatings.

TiO2 Nanotube Arrays Inside Ultrafine Ti Tubes with an Aspect Ratio of 2500 for Sensing Needles: The Bubble Effect in a Confined Space

Capillary metal tubes have attracted considerable interest for flexible electronics, portable devices, trace sampling, and detection. Tailoring the microstructure and wettability inside the capillary tubes is of paramount importance, yet it presents great difficulty because of the spatial confinement. Here, the coupling effect is revealed between the fluidic and electric field induced by bubble motion in a confined space during anodic oxidation. By controlling the bubble regeneration and flow rate, uniform and superhydrophilic TiO2 nanotube arrays are developed throughout the inner surface of an ultrafine Ti tube with a diameter of 0.4 mm and length of 1000 mm, equivalent to an aspect ratio of 2500 that is the largest value being ever reported. The inner surface of a capillary tube is further coated with a polytetrafluoroethylene layer and explored as a sensing needle for liquid detection in terms of concentration and species. This study provides an innovative approach to tailor the microstructure and wettability in a confined space for functional capillary tubes.

Superwetting Capillary Tubes: Surface Science under Confined Space

Capillarity is a crucial and pervasive phenomenon in nature and has found important applications in wearable electronics, medical devices, and miniature energy systems. Capillary tubes are the transport vessels in which the surface wettability plays an essential role in efficient and accurate liquid delivery. However, it remains a challenging issue to tailor and measure the surface wettability inside the tubes in view of the confined space. Herein, recent progress on the surface science under confined space is discussed, with a particular focus on surface modification, wettability evaluation, and advanced applications of the superwetting capillary tubes. This Perspective aims to highlight the emerging opportunities in surface science with spatial confinement toward flexible and portable devices.

Hyperbranched Poly-L-Lysine-Based Water-Insoluble Complexes as Antibacterial Agents with Efficient Antibacterial Activity And Cytocompatibility

Despite the advances in technology, bacterial infection associated with biomedical devices is still one of the most challenging issues in clinical practice. Incorporation of antimicrobial agents is regarded as an efficient way to combat medical device associated infectious. However, most of antimicrobial agents have high toxicity to host cells. Thus, fabrication of novel antimicrobial agents that simultaneously fulfill the requirements of antibacterial activity as well as biocompatibility is urgently needed. Herein, a series of water-insoluble antibacterial complexes based on hyperbranched poly-L-lysine (HBPL) and four different surfactants through non-covalent interactions are developed. Such kinds of surfactants have great effects on the antibacterial property of poly(ɛ-caprolactone) (PCL) films that incorporate with the HBPL-based complexes. The results reveal that the PCL films that doped with HBPL/phosphate ester surfactant complexes showed the highest bacterial killing efficiency. Moreover, the cytocompatibility of the composite films is also investigated. Hemolysis experiments indicate that all the films  had low hemolytic activities. Considering the excellent antimicrobial and cytocompatibility properties, this work believes that the optimized complexes have great potential to be used as antimicrobial agents in biomedical field.

Fabrication of Oleophilic Polypeptide Nanoparticle from Complexing of Cross-Linked Epsilon-poly-l-lysine with Docusate Sodium for Preparation of Bactericidal Thermoplastic Polyurethanes

Thermoplastic polyurethanes (TPUs) are extensively utilized in the biomedical field due to their exceptional mechanical properties and biocompatibility. However, the lack of antibacterial activity limits their application ranges. Nanoscopic particle-based additives with inherent antibacterial characteristics are regarded as promising strategies to prevent biomaterials-associated infection. Herein, a novel polymeric nanoparticle is prepared, which integrates chemically cross-linked epsilon-poly-l-lysine (CPL) and anionic surfactant-docusate sodium (DS). The cross-linked epsilon-poly-l-lysine/docusate sodium (CPL/DS) nanoparticle can be well dispersed in organic solvent and a polymer matrix, which is beneficial to endowing TPUs with synergistic miscibility and antibacterial properties. An antibacterial test showed that the CPL/DS nanoparticles have strong antibacterial activity against S. aureus. Moreover, the results of antibacterial experiments in vitro revealed that almost 100% of S. aureus could be killed by CPL/DS nanoparticle-embedded TPU film with a content of 0.5 wt %. In addition, all of the CPL/DS modified TPU films showed good cytocompatibility in vitro. Consequently, this kind of CPL/DS nanoplatform has great potential to serve as a safe and high-efficient bactericidal agent for endowing biomedical devices with bactericidal property.

Structuring liquids through solvent-assisted interfacial association of oppositely charged polyelectrolytes and amphiphiles

HYPOTHESIS

Sculpting liquids into different shapes is usually based on the interfacial interactions of functionalized nanoparticles or polymers with specific ligands, leading to exciting material properties due to the combination of the mobility of liquid components with the solid-like characteristic of the arrested liquid/liquid interface. There is an intense interest in novel structured liquids produced from simple compounds with versatile application potentials. Complexes of oppositely charged commercial polyelectrolytes and traditional aliphatic surfactants are good candidates for this goal since they reveal rich structural features and could adsorb at various interfaces. However, they have not been applied yet for structuring liquids.

EXPERIMENTS

The interfacial interactions and film formation between aqueous sodium poly(styrene) sulfonate solutions (NaPSS) and hexadecylamine (HDA) solutions in various alkanols were investigated by surface tension measurements and ATR-IR spectroscopy. 3D printing experiments also assessed the robustness of the formed films.

FINDINGS

Arrested fatty alcohol/water interfaces were formed due to the interfacial association of NaPSS, HDA, and alkanol molecules, which also act as cosurfactants in the surface region. These solid films enable the synthesis of temperature-sensitive all-in-liquid constructs and offer alternatives to bulk polyion/mixed surfactant assemblies prepared earlier through numerous synthesis steps.

Water-Triggered Segment Orientation of Long-Lasting Anti-Biofouling Polyurethane Coatings on Biomedical Catheters via Solvent Exchange Strategy

The formation of biofilm and thrombus on medical catheters poses a significant life-threatening concern. Hydrophilic anti-biofouling coatings upon catheter surfaces with complex shapes and narrow lumens are demonstrated to have the potential in reducing complications. However, their effectiveness is constrained by poor mechanical stability and weak substrate adhesion. Herein, a novel zwitterionic polyurethane (SUPU) with strong mechanical stability and long-term anti-biofouling is developed by controlling the ratio of sulfobetaine-diol and ureido-pyrimidinone. Once immersed in water, as-synthesized zwitterionic coating (SUPU3 SE) would undergo a water-driven segment reorientation to obtain much higher durability than its direct drying one, even under various extreme treatments, including acidic solution, abrasion, ultrasonication, flushing, and shearing, in PBS at 37 °C for 14 days. Moreover, SUPU3 SE coating could achieve a 97.1% of exceptional reducing protein fouling, complete prevention of cell adhesion, and long-lasting anti-biofilm performance even after 30 days. Finally, the good anti-thrombogenic formations of SUPU3 SE coating with bacterial treatment are validated in blood circulation through an ex vivo rabbit arteriovenous shunt model. This work provides a facile approach to fabricating stable hydrophilic coating through a simple solvent exchange to reduce thrombosis and infection of biomedical catheters.