GC-MS characterisation and identification of natural terpenic resins employed in works of art

TLC and HPTLC-APCI-MS for the rapid discrimination of plant resins frequently used for lacquers and varnishes by artists and conservators

INTRODUCTION

Depending on their terpenoid and phenolic constituents plant resins can be classified as diterpenoid, triterpenoid or phenolic resins; thereby the profile of diterpenes and triterpenes is considered as genus- or even species-specific.

OBJECTIVES

We aimed to develop a simple, rapid, inexpensive, sensitive and specific method for the identification of resin-specific triterpenoid and phenolic compounds in plant resins using (HP)TLC [(high-performance) thin-layer chromatography] combined with APCI-MS (atmospheric pressure chemical ionisation mass spectrometry) and post-chromatographic detection reactions.

METHODS

Twenty resin samples from different plant species were analysed. Different extraction procedures, post-chromatographic detection reagents as well as various sorbents and solvents for planar chromatography were tested. To evaluate the potential of the optimised (HP)TLC-APCI-MS methods, parameter such as limit of detection (LOD) was determined for selected marker compounds.

RESULTS

Our protocol enabled qualitative analyses of chemotaxonomic molecular markers in natural resins such as dammar, mastic, olibanum and benzoin. For the first time, the application of thionyl chloride-stannic chloride reagent for a specific post-chromatographic detection of triterpenes is reported, sometimes even allowing discrimination between isomers based on their characteristic colour sequences. For triterpene acids, triterpene alcohols and phenolic compounds, detection limits of 2-20 ng/TLC zone and a system precision with a relative standard deviation (RSD) in the range of 3.9%-7.0% were achieved by (HP)TLC-APCI-MS. The applicability of the method for the analysis of resin-based varnishes was successfully tested on a mastic-based varnish. Thus, the method we propose is a helpful tool for the discrimination of resins and resin-based varnishes with respect to their botanical origin.

Biomolecular analyses enable new insights into ancient Egyptian embalming

The ability of the ancient Egyptians to preserve the human body through embalming has not only fascinated people since antiquity, but also has always raised the question of how this outstanding chemical and ritual process was practically achieved. Here we integrate archaeological, philological and organic residue analyses, shedding new light on the practice and economy of embalming in ancient Egypt. We analysed the organic contents of 31 ceramic vessels recovered from a 26th Dynasty embalming workshop at Saqqara^1,2. These vessels were labelled according to their content and/or use, enabling us to correlate organic substances with their Egyptian names and specific embalming practices. We identified specific mixtures of fragrant or antiseptic oils, tars and resins that were used to embalm the head and treat the wrappings using gas chromatography-mass spectrometry analyses. Our study of the Saqqara workshop extends interpretations from a micro-level analysis highlighting the socio-economic status of a tomb owner^3-7 to macro-level interpretations of the society. The identification of non-local organic substances enables the reconstruction of trade networks that provided ancient Egyptian embalmers with the substances required for mummification. This extensive demand for foreign products promoted trade both within the Mediterranean^8-10 (for example, Pistacia and conifer by-products) and with tropical forest regions (for example, dammar and elemi). Additionally, we show that at Saqqara, antiu and sefet-well known from ancient texts and usually translated as 'myrrh' or 'incense'^11-13 and 'a sacred oil'^13,14-refer to a coniferous oils-or-tars-based mixture and an unguent with plant additives, respectively.

Geographical variations and correlation among some chemical and thermal properties of Almaciga (Agathis philippinensis Warb.) resins from selected commercial sites in the Philippines

Almaciga (Agathis philippinensis Warb.), a tropical conifer that is tapped for its resin commercially known as Manila copal, grows in many parts of the Philippines, but resin buyers prefer and pay a better price for resin from southern Palawan. The study was done to characterize almaciga resins obtained from commercial sites in Davao Oriental and Palawan (Brooke's Point and Marufinas) to explain the quality and price differences. Fresh and aged resin samples were subjected to wet chemical, thermal, and spectral analyses. Generally, the resin samples were found to be soluble in the more polar solvents although significant variations were observed for resins from various sites. Titrimetric determination revealed no significant variation in acid and saponification values, although the Brooke's Point resin had significantly lower unsaponifiable components. Predominant Fourier transform infrared spectroscopy (FTIR) absorption peaks for fresh resin include strong C=O stretch and weak = C–H stretch. Aged Palawan resins, which showed increased solubility in polar solvents, exhibited increased intensity of prominent FTIR peaks such as O–H stretch and C=O stretch. The weak peak at 1719 cm⁻¹ seen in fresh Palawan resins was no longer observed in aged resins. DSC revealed the semi-crystalline nature of almaciga resin and melting temperatures similar to diterpenoid resin acids. This is attributed to the presence of increasing amounts of oxidized abietic acids as shown by gas chromatography-mass spectrometry (GCMS). For the Davao Oriental resins, significant amount of agatholic acid was shown, while resin acids of the abietane and pimarane type were conspicuously absent in the GC-MS spectrograms. The study found evidence that almaciga resins from Davao and Palawan differ in chemical composition and physical properties, which could explain the quality and price differences.

Development of a gas chromatography-mass spectrometry method to monitor in a single run, mono- to triterpenoid compounds distribution in resinous plant materials

A new procedure based on gas chromatography coupled to mass spectrometry (GC-MS) was developed for the simultaneous determination of mono- to triterpenoid compounds in resinous materials. Given the difference of volatility and polarity of the studied compounds some critical steps in this methodology had to be identified and investigated. The recovery of volatile compounds after sample extraction was studied. A recovery range from 30% to 100% from the more volatile monoterpene to the least one was observed. Then the mandatory derivatization step for the analysis of pentacyclic triterpenes bearing hydroxyl and carboxyl groups was optimized. Results showed that derivatization using N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) and trimethylchlorosilane (TMCS) in pyridine (22:13:65 v/v/v) for 2h at 30 °C was the most efficient method of derivatizing all the hydroxyl and carboxylic acid groups contained in the triterpene structures. After choosing the best injection parameters for these compounds, the selectivity of the GC column towards the separation of these terpenoids was investigated using statistical tools (principal component analysis and desirability functions). A separation with a good resolution was achieved on an HP-5ms column using a programmed temperature vaporizing injector (PTV). The method was pre-validated in terms of detection limits (LOD from 100 μg L(-1) to 200 μg L(-1) depending on the compound), linearity and repeatability using seven compounds representative of mono- and triterpenoid classes. An exhaustive characterization of various types of resins (di-, triterpenic and oleo-gum resins) was achieved.

Characterization and Identification of Natural Terpenic Resins employed in "Madonna con Bambino e Angeli" by Antonello da Messina using Gas Chromatography-Mass Spectrometry

Background

Natural resins were frequently employed as adhesives or as components of oleo-resinous media in paintings in the past. The identification of vegetable resins is still an open problem. The aim of this paper is to analyze by GC-MS some vegetable resins frequently employed in paintings, such as Venice turpentine, dammar, copal, elemi in order to identify their main component in raw and aged samples. Some molecules are proposed as chemical “markers” to identify these natural resins.

Results

The results obtained on standards allowed us to successfully analyze sample collected from one work of art: the Madonna with the Infant and Angels by Antonello da Messina (XV century).

Conclusion

The results obtained confirm that the painting the artist originally used a mixture of linseed oil and natural resin (Venice turpentine) as binding medium.

Characterisation of varnishes used in violins by pyrolysis-gas chromatography/mass spectrometry

The correct characterisation and a detailed knowledge of the materials originally used in violin varnishes, like natural resins, is crucial for the conservation in museums and for a suitable restoration technique. The study presented here reports on the potential of pyrolysis (Py) coupled with gas chromatography (GC) and mass spectrometry (MS) for the identification of chemical markers of each resin; this technique is very sensitive and selective, it needs a small quantity of sample and does not require chemical treatments. To improve the chromatographic behaviour of polar compounds the derivatising agent tetramethylammonium hydroxide (TMAH) in combination with pyrolysis has been used, in the so-called TMAH thermochemolysis or thermally assisted hydrolysis and methylation (THM), or more simply pyrolysis-methylation. The natural resins studied were colophony, sandarac, manila copal, elemi, amber and benzoin, mainly composed of terpenic compounds, with the exception of the latter, composed of aromatic compounds. Many compounds were identified; in particular, methyl esters of resinous acids that, individually or in a group, can be used as chemical markers. However, through this technique it was not possible to distinguish between the sandarac and manila copal resins because their chromatographic behaviour is very similar. Finally, the procedure applied has been employed in the characterisation of original varnish samples.

Study of the influencing effect of pigments on the photoageing of terpenoid resins used as pictorial media

Terpenoid resins have been mainly used as components of pictorial varnishes and binding media from ancient times. In such latest instances, the resin is mixed with pigments affecting its physical and chemical properties. A new procedure based on gas chromatography-mass spectrometry (GC/MS) has been applied, in this work, in combination with Fourier transform infrared spectroscopy (FTIR), with the aim of determining the changes undergone by di- and triterpenoid resins employed as components of binding media. The GC/MS method is based on the derivatisation of these resins using trimethylsilylimidazol. Characterization of the main components of the di- and triterpenoid fractions and their oxidised products, occurring in the diterpenoid resin colophony and a triterpenoid Mexical copal (Bursera cuneata (Schl) Engl.), has been achieved. Artificially photoaged specimens of pure resin and binary systems pigment+resin prepared as thin films using lead white, ochre yellow, umber raw and verdigris have also been analysed to study the changes undergone by the di- and triterpenoid components of the resins. Oxidation processes taking place on di- and triterpenoids during photoageing are described. Moreover, the results obtained indicate that pigments have a different effect on the two studied resins. Thus, the presence of pigments induces, in general, a catalysing effect on the oxidative polymerisation reactions in the earliest stages of the natural curing of the paint films whereas a loss of the catalysing effectiveness, in particular, for verdigris containing specimens, is observed during photoageing. Complexation of diterpenoid molecules with copper(II) ions in the earliest stages of the curing has also been evidenced by FTIR analysis.

Study of Burseraceae resins used in binding media and varnishes from artworks by gas chromatography–mass spectrometry and pyrolysis-gas chromatography–mass spectrometry

In the present work, a study attempting to characterize the Manila elemi and Mexican copal resins from the Burseraceae family, which are used as components of varnishes and binding media of artworks, has been carried out. A new GC-MS method involving the use of methyl chloroformate as derivatisation reagent has been proposed. A second method which uses pyrolysis-GC-MS and hexamethyldisilazane as derivatization reagent has also been applied. Characterization of the main components of the mono-, sesqui- and triterpenoid fractions occurring in the raw materials has been achieved. Both alpha- and beta-amyrin have been established as the major triterpenoid compounds occurring in these resins together with hop-22(29)-en-3beta-ol, found only in the Mexican copal. Artificially aged samples of Manila elemi and Mexican copal have also been analysed in order to study the stability of the triterpenoid components of the resins and their possible use as marker molecules. The results obtained indicate that these molecules, in particular, alpha- and beta-amyrin undergo oxidation processes during both artificial and natural ageing. Nevertheless, hop-22(29)-en-3beta-ol could be selected as marker compound for Mexican copal. The proposed methods of analysis have been applied to real paint samples extracted from paintings in which Mexican copal was present as the main component of an "oleoresin" binding medium to assess their ability for identifying this product when used in artworks. Satisfactory identification of this resin is obtained by means of GC-MS whereas Py-GC-MS provides, in general, weaker signals for the components of the resin. Additionally, the influence of the pigments present in real samples on the resin ageing process has been considered.