Catalyst and chirality dependent growth of carbon nanotubes determined through nano-test tube chemistry

Formation of nanoribbons by carbon atoms confined in a single-walled carbon nanotube-A molecular dynamics study

Carbon nanotubes can serve as one-dimensional nanoreactors for the in-tube synthesis of various nanostructures. Experimental observations have shown that chains, inner tubes, or nanoribbons can grow by the thermal decomposition of organic/organometallic molecules encapsulated in carbon nanotubes. The result of the process depends on the temperature, the diameter of the nanotube, and the type and amount of material introduced inside the tube. Nanoribbons are particularly promising materials for nanoelectronics. Motivated by recent experimental results observing the formation of carbon nanoribbons inside carbon nanotubes, molecular dynamics calculations were performed with the open source LAMMPS code to investigate the reactions between carbon atoms confined within a single-walled carbon nanotube. Our results show that the interatomic potentials behave differently in quasi-one-dimensional simulations of nanotube-confined space than in three-dimensional simulations. In particular, the Tersoff potential performs better than the widely used Reactive Force Field potential in describing the formation of carbon nanoribbons inside nanotubes. We also found a temperature window where the nanoribbons were formed with the fewest defects, i.e., with the largest flatness and the most hexagons, which is in agreement with the experimental temperature range.

Metallocene-Filled Single-Walled Carbon Nanotube Hybrids

In this paper, the growth mechanism, structure, growth processes, growth kinetics, and optical, vibronic and electronic properties of metallocene-filled single-walled carbon nanotubes (SWCNTs) are considered. A description of the procedures used to fill the nanotubes is provided. An investigation of doping effects on metallicity-mixed SWCNTs filled with metallocenes by Raman spectroscopy, near edge X-ray absorption fine structure spectroscopy, photoemission spectroscopy, and optical absorption spectroscopy is described. The studies of doping effects on metallicity-sorted SWCNTs filled with metallocenes are discussed. Doping effects in metallicity-mixed and sorted SWCNTs upon the chemical transformation of encapsulated molecules are analyzed. A discussion of the modification of the electronic properties of filled SWCNTs is presented. Applications of metallocene-filled SWCNTs in electrochemistry, thermoelectric power generation, chemical sensors, and magnetic recording are discussed.

Phemenology of Filling, Investigation of Growth Kinetics and Electronic Properties for Applications of Filled Single-Walled Carbon Nanotubes

This review discusses the phemenology of filling, the investigation of kinetics, and the electronic properties for applications of filled single-walled carbon nanotubes (SWCNTs), and summarizes five main achievements that were obtained in processing the spectroscopic data of SWCNTs filled with metal halogenide, metal chalcogenide, metal and metallocenes. First, the methods of processing kinetic data were developed to reveal precise trends in growth rates and activation energies of the growth of SWCNTs. Second, the metal-dependence of kinetics was revealed. Third, metallicity-sorted (metallic and semiconducting) SWCNTs were filled with a range of substances and the electronic properties were investigated. Fourth, new approaches to processing the data of spectroscopic investigations of filled SWCNTs were developed, which allowed more reliable and precise analysis of the experimental results. Fifth, the correlation between the physical and chemical properties of encapsulated substances and the electronic properties of SWCNTs were elucidated. These points are highlighted in the review.

Kinetics, Electronic Properties of Filled Carbon Nanotubes Investigated with Spectroscopy for Applications

The paper is dedicated to the discussion of kinetics of growth, and electronic properties of filled carbon nanotubes investigated by spectroscopy for applications. The paper starts with discussion of growth of carbon nanotubes inside metallocene-filled carbon nanotubes. Nickelocene, cobaltocene are considered for growth of carbon nanotubes. Then, the investigations of filled carbon nanotubes by four spectroscopic techniques are discussed. Among them are Raman spectroscopy, near edge X-ray absorption fine-structure spectroscopy, photoemission spectroscopy, optical absorption spectroscopy. It is discussed that metal halogenides, metal chalcogenides, metals lead to changes in electronic structure of nanotubes with n- or p-doping. The filling of carbon nanotubes with different organic and inorganic substances results in many promising applications. This review adds significant contribution to understanding of the kinetics and electronic properties of filled SWCNTs with considering new results of recent investigations. Challenges in various fields are analyzed and summarized, which shows the author's viewpoint of progress in the spectroscopy of filled SWCNTs. This is a valuable step toward applications of filled SWCNTs and transfer of existing ideas from lab to industrial scale.

Unravelling the Complete Raman Response of Graphene Nanoribbons Discerning the Signature of Edge Passivation

Controlling the edge morphology and terminations of graphene nanoribbons (GNR) allows tailoring their electronic properties and boosts their application potential. One way of making such structures is encapsulating them inside single-walled carbon nanotubes. Despite the versatility of Raman spectroscopy to resolve strong spectral signals of these systems, discerning the response of long nanoribbons from that of any residual precursor remaining outside after synthesis has been so far elusive. Here, the terrylene dye is used as precursor to make long and ultra-narrow armchair-edged GNR inside nanotubes. The alignment and characteristic length of terrylene encapsulated parallel to the tube's axis facilitates the ribbon formation via polymerization, with high stability up to 750 °C when the hybrid system is kept in high vacuum. A high temperature annealing is used to remove the terrylene external molecules and a subtraction model based on the determination of a scaling factor related to the G-band response of the system is developed. This not only represents a critical step forward toward the analysis of the nanoribbon-nanotube system, but it is a study that enables unraveling the Raman signatures of the individual CH-modes (the signature of edge passivation) for GNR for the first time with unprecedented detail.

Temperature-Dependent Growth of 36 Inner Nanotubes inside Nickelocene, Cobaltocene and Ferrocene-Filled Single-Walled Carbon Nanotubes

We have investigated the effects of temperature, diameter and metal catalyst type on the growth of inner nanotubes inside metallocene-filled single-walled carbon nanotubes (SWCNTs). The effects on the yield of different chiralities of inner nanotubes were scrutinized by multifrequency Raman spectroscopy. The investigated diameters range from ~0.7 to 1.3 nm and comprise 36 distinct chiralities. For all three investigated metals (Ni, Co, Fe), there is a linear correlation of growth temperature with nanotube diameter. The common slope for these metals is found to be 40.5 °C/Å. The temperature difference between the largest and the smallest diameter tubes amounts to ~230 °C for all three precursors. The growth temperatures are offset by 34 °C from Ni to Co and another 28 °C from Co to Fe. The quantified correlations of temperature, diameter and metal catalyst type provide the basis for engineering the diameter-specific growth of nanotubes.

Chirality-dependent growth of single-wall carbon nanotubes as revealed inside nano-test tubes

Growth dynamics of single-wall carbon nanotubes (SWCNTs) have been studied with nickelocene as a precursor encapsulated in the interior of template SWCNTs. By means of multi-laser Raman spectroscopy, growth curves of nine different SWCNTs, (8,8), (12,3), (13,1), (9,6), (10,4), (11,2), (11,1), (9,3) and (9,2), have been determined upon in situ annealing at various temperatures. The data reveal that the nanotubes grow through fast and slow reaction pathways with high and low activation energies, respectively. While the activation energy of the slow growth is independent of the nanotube's chiral vector, that of the fast growth exhibits a monotonic increase as the tube diameter reduces from ∼1.1 down to 0.8 nm and no dependency on the chiral angle, which can be attributed to the size-dependent properties of catalyst clusters. The chirality dependent catalytic growth properties exploited in this study provide the basis for a large-scale synthesis of single-chiral vector SWCNTs.

SiO2/ZnO Composite Hollow Sub-Micron Fibers: Fabrication from Facile Single Capillary Electrospinning and Their Photoluminescence Properties

In this work, SiO2/ZnO composite hollow sub-micron fibers were fabricated by a facile single capillary electrospinning technique followed by calcination, using tetraethyl orthosilicate (TEOS), polyvinylpyrrolidone (PVP) and ZnO nanoparticles as raw materials. The characterization results of the scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) spectra indicated that the asprepared composite hollow fibers consisted of amorphous SiO2 and hexagonal wurtzite ZnO. The products revealed uniform tubular structure with outer diameters of 400-500 nm and wall thickness of 50-60 nm. The gases generated and the directional escaped mechanism was proposed to illustrate the formation of SiO2/ZnO composite hollow sub-micron fibers. Furthermore, a broad blue emission band was observed in the photoluminescence (PL) of SiO2/ZnO composite hollow sub-micron fibers, exhibiting great potential applications as blue light-emitting candidate materials.

Investigation of growth dynamics of carbon nanotubes

The synthesis of single-walled carbon nanotubes (SWCNTs) with defined properties is required for both fundamental investigations and practical applications. The revealing and thorough understanding of the growth mechanism of SWCNTs is the key to the synthesis of nanotubes with required properties. This paper reviews the current status of the research on the investigation of growth dynamics of carbon nanotubes. The review starts with the consideration of the peculiarities of the growth mechanism of carbon nanotubes. The physical and chemical states of the catalyst during the nanotube growth are discussed. The chirality selective growth of nanotubes is described. The main part of the review is dedicated to the analysis and systematization of the reported results on the investigation of growth dynamics of nanotubes. The studies on the revealing of the dependence of the growth rate of nanotubes on the synthesis parameters are reviewed. The correlation between the lifetime of catalyst and growth rate of nanotubes is discussed. The reports on the calculation of the activation energy of the nanotube growth are summarized. Finally, the growth properties of inner tubes inside SWCNTs are considered.

Nickel clusters embedded in carbon nanotubes as high performance magnets

Ensembles of fcc nickel nanowires have been synthesized with defined mean sizes in the interior of single-wall carbon nanotubes. The method allows the intrinsic nature of single-domain magnets to emerge with large coercivity as their size becomes as small as the exchange length of nickel. By means of X-ray magnetic circular dichroism we probe electronic interactions at nickel-carbon interfaces where nickel exhibit no hysteresis and size-dependent spin magnetic moment. A manifestation of the interacting two subsystems on a bulk scale is traced in the nanotube’s magnetoresistance as explained within the framework of weak localization.

Doping of single-walled carbon nanotubes controlled via chemical transformation of encapsulated nickelocene

Controlled doping of carbon nanotubes is elemental for their electronic applications. Here we report an approach to tune the polarity and degree of doping of single-walled carbon nanotubes via filling with nickelocene followed by encapsulated reactions. Using Raman, photoemission spectroscopy and transmission electron microscopy, we show that nickelocene molecules transform into nickel carbides, nickel and inner carbon nanotubes with reaction temperatures as low as 250 °C. The doping efficiency is determined for each chemical component. Synchronous charge transfer among the molecular components allows bipolar doping of the carbon nanotubes to be achieved in a broad range of ±0.0012 e(-) per carbon.

Microscopic insight into the bilateral formation of carbon spirals from a symmetric iron core

Mirrored carbon-spirals have been produced from pressured ferrocene via the bilateral extrusion of the spiral pairs from an iron core. A parametric plot of the surface geometry displays the fractal growth of the conical helix made with the logarithmic spiral. Electron microscopy studies show the core is a crystalline cementite which grows and transforms its shape from spherical to biconical as it extrudes two spiralling carbon arms. In a cross section along the arms we observe graphitic flakes arranged in a herringbone structure, normal to which defects propagate. Local-wave-pattern analysis reveals nanoscale defect patterns of two-fold symmetry around the core. The data suggest that the bilateral growth originates from a globular cementite crystal with molten surfaces and the nano-defects shape emerging hexagonal carbon into a fractal structure. Understanding and knowledge obtained provide a basis for the controlled production of advanced carbon materials with designed geometries.

Uniform, dense arrays of vertically aligned, large-diameter single-walled carbon nanotubes

Precisely controlled reactive chemical vapor synthesis of highly uniform, dense arrays of vertically aligned single-walled carbon nanotubes (SWCNTs) using tailored trilayered Fe/Al(2)O(3)/SiO(2) catalyst is demonstrated. More than 90% population of thick nanotubes (>3 nm in diameter) can be produced by tailoring the thickness and microstructure of the secondary catalyst supporting SiO(2) layer, which is commonly overlooked. The proposed model based on the atomic force microanalysis suggests that this tailoring leads to uniform and dense arrays of relatively large Fe catalyst nanoparticles on which the thick SWCNTs nucleate, while small nanotubes and amorphous carbon are effectively etched away. Our results resolve a persistent issue of selective (while avoiding multiwalled nanotubes and other carbon nanostructures) synthesis of thick vertically aligned SWCNTs whose easily switchable thickness-dependent electronic properties enable advanced applications in nanoelectronic, energy, drug delivery, and membrane technologies.

Thin single-walled carbon nanotubes with narrow chirality distribution: constructive interplay of plasma and Gibbs-Thomson effects

Multiscale, multiphase numerical modeling is used to explain the mechanisms of effective control of chirality distributions of single-walled carbon nanotubes in direct plasma growth and suggest effective approaches to further improvement. The model includes an unprecedented combination of the plasma sheath, ion/radical transport, species creation/loss, plasma-surface interaction, heat transfer, surface/bulk diffusion, graphene layer nucleation, and bending/lift-off modules. It is shown that the constructive interplay between the plasma and the Gibbs-Thomson effect can lead to the effective nucleation and lift-off of small graphene layers on small metal catalyst nanoparticles. As a result, much thinner nanotubes with narrower chirality distributions can nucleate at much lower process temperatures and pressures compared to thermal CVD. This approach is validated by a host of experimental results, substantially reduces the amounts of energy and atomic matter required for the nanotube growth, and can be extended to other nanoscale structures and materials systems, thereby nearing the ultimate goal of energy- and matter-efficient nanotechnology.