High-performance oxygen reduction electrocatalysts based on cheap carbon black, nitrogen, and trace iron

Bionic Fe-N-C catalyst with abundant exposed Fe-Nx sites and enhanced mass transfer properties for efficient oxygen reduction

Transition metal and nitrogen co-doped carbon electrocatalysts are promising candidates to replace the precious metal platinum (Pt) in oxygen reduction reactions (ORR). Unfortunately, the electrochemical performance of existing electrocatalysts is restricted due to limited accessibility of active sites. Inspired by jellyfish tentacles, we design an efficient ORR micro-reactor called Fe-Nx/HC@NWs. It features abundant exposed Fe-Nx active sites dispersed on nitrogen-doped cubic carbon cages, which have a hierarchically porous and hairy structure. The accessible, atomically dispersed Fe-Nx sites and the elaborate substrate architecture synergize to provide the catalyst withremarkable ORR catalytic activity, extraordinary long-term stability, and favorable methanol tolerance in an alkaline electrolyte; overall, its performance is comparable to that of commercial carbon-supported Pt. Our synthesis is facile and controllable, paving a new avenue toward advanced non-precious metal-based electrocatalysts for energy storage and conversion.

Operando formation of highly efficient electrocatalysts induced by heteroatom leaching

Heterogeneous nano-electrocatalysts doped with nonmetal atoms have been studied extensively based on the so-called dopant-based active sites, while little attention has been paid to the stability of these dopants under working conditions. In this work, we reveal significantly, when the redox working potential is too low negatively or too high positively, the active sites based on these dopants actually tend to collapse. It means that some previously observed "remarkable catalytic performance" actually originated from some unknown active sites formed in situ. Take the Bi-F for the CO2RR as an example, results show that the observed remarkable activity and stability were not directly from F-based active sites, but the defective Bi sites formed in situ after the dopant leaching. Such a fact is unveiled from several heteroatom-doped nanocatalysts for four typical reactions (CO2RR, HER, ORR, and OER). This work provides insight into the role of dopants in electrocatalysis.

In situ electrochemical synthesis of Pd aerogels as highly efficient anodic electrocatalysts for alkaline fuel cells

Improving the utilization of noble metals is extremely urgent for fuel cell electrocatalysis, while three-dimensional hierarchical noble metal aerogels with abundant sites and channels are proposed to reinforce their electrocatalytic performances and decrease their amounts. Herein, novel Pd aerogels with tunable surface chemical states were prepared through a facile in situ electrochemical activation, starting with PdO x aerogels by the hydrolysis method. The hierarchical porous Pd aerogels showed unprecedented high activity towards the electrocatalytic oxidation of fuels including methanol (2.99 A mgPd -1), ethanol (8.81 A mgPd -1), and others in alkali, outperforming commercial catalysts (7.12- and 13.66-fold, corresponding to methanol and ethanol). Theoretical investigation unveiled the hybrid surface states with metallic and oxidized Pd species in Pd aerogels to regulate the adsorption of intermediates and facilitate the synergistic oxidation of adsorbed *CO, resulting in enhanced activity with the MOR as the model. Therefore, efficient Pd aerogels through the in situ electrochemical activation of PdO x aerogels were proposed and showed great potential for fuel cell anodic electrocatalysis.

Biomass-derived N,S co-doped 3D multichannel carbon supported Au@Pd@Pt catalysts for oxygen reduction

A beancurd-derived mesoporous carbon (NSC) was prepared by an environmentally friendly procedure, and then it was investigated as Au@Pd@Pt core-shell catalysts support (Au@Pd@Pt-NSC) for oxygen reduction reaction (ORR). The Au@Pd@Pt-NSC (E_1/2 = 0.91 V) has a marginally negative ORR half-wave potential compared with other materials, in particular Pt/C (E_1/2 = 0.87 V) and Au@Pd@Pt-C (E_1/2 = 0.81 V). The specific and mass activities of the Au@Pd@Pt-NSC were 5 and 13 times higher than the commercial a Pt/C catalyst. After 20000 cycles of rapid durability test, the Au@Pd@Pt-NSC sample showed a loss of just 4.9% compared with the initial ECSA area, which can be attributed to the favorable interaction between Au@Pd@Pt and NSC. These results can be considered of environmental relevance and high potential applicability.

Rice-like and rose-like zinc silicates anchored on amorphous carbon derived from natural reed leaves for high-performance supercapacitors

3D N, S, P-doped rice-like C-Zn4Si2O7(OH)2·H2O (C-ZnSi-N2) and rose-like C-Zn2SiO4 (C-ZnSi-CO2) are derived from reed leaves and used for application in supercapacitors. The as-prepared C-ZnSi architectures with a large number of hierarchical pores and high specific surface area from reed leaves have outstanding electrochemical performance. The obtained C-ZnSi-N2 shows 341 F g-1 at the current density of 0.5 A g-1, while the C-ZnSi-CO2 exhibits 498 F g-1, and both of the C-ZnSi materials significantly retain above 99% of their capacitance after 10 000 cycles. Furthermore, the flexible solid-state asymmetric supercapacitors (ASCs) synthesized from C-ZnSi and activated carbon (denoted as C-ZnSi-N2//AC and C-ZnSi-CO2//AC) achieve a high capacitance (405 and 194 mF cm-2 at the current density of 2 mA cm-2, respectively). Besides, the ASC devices show good cycling stability for 7300 cycles with 73% and 77% capacitance retention. The results presented in this study indicate that the N, S, P-doped C-ZnSi architectures from natural reed leaves are promising and efficient materials for manufacturing high performance supercapacitors.

Construction of Dual-Active-Site Copper Catalyst Containing both CuN3 and CuN4 Sites

Clear recognition and rational construction of suitable active center for specific reaction is always of great significance in designing highly efficient catalysts. Herein, a dual-active-site copper catalyst (DAS-Cu) containing both CuN₃ and CuN₄ sites is reported. Such catalysts show extremely high catalytic performance (yield: up to 97%) toward oxyphosphorylation of alkenes, while catalysts with single active site (CuN₃ or CuN₄ ) are chemically inert in this reaction. Combined with theoretical and experimental results, the different roles of two different Cu active sites in this reaction are further identified. CuN₃ site captures the oxygen and trigger further oxidizing process, while CuN₄ site provides moderate adsorption sites for the protection of phosphonyl radicals. This work deeply discloses the significant cooperated role with two single-atomic sites in one catalytic active center and brings up a valuable clue for the rational design of better-performing heterogeneous catalyst.

Construction of nitrogen-doped porous carbon nanosheets decorated with Fe–N4 and iron oxides by a biomass coordination strategy for efficient oxygen reduction reaction

A highly efficient Fe₂O₃@C/FeNC electrocatalyst with Fe–N₄ and iron oxides decorated on nitrogen doped carbon nanosheets has been synthesized by the one-step pyrolysis of Fe-coordinated egg white without acid leaching assistance.

Enhanced utilization of active sites of Fe/N/C catalysts by pore-in-pore structures for ultrahigh mass activity

Carbon material doped with nitrogen and transition metal is a kind of promising candidate of the platinum for oxygen reduction reaction (ORR) process due to its low cost, efficiency and stability. Here we demonstrate an original type of Fe/N/C catalyst based on pore-in-pore structures (P-P Fe/N/C), showing one of the highest oxygen reduction reaction performances among all reported Fe/N/C-type catalysts (onset potential of 0.995 V, half-wave potential of 0.881 V vs. RHE with a relatively low mass loading of 0.32 mg cm^-2 and long-term durability (97% relative current in 60 000 s operation) in alkaline media. Such outstanding performances can be ascribed to the efficient active sites activated by the encapsulated atomic and subnanoscale iron, and great exposure of these active sites due to the unique pore-in-pore hierarchical construction. Once assembled in lithium-O₂ batteries, a specific capacity of 7250 mA h g^-1 at 70 mA g^-1 can be obtained by the P-P Fe/N/C catalyst. Moreover, upon cycling, the P-P Fe/N/C electrode can be cycled 150 times with no capacity loss, which is much longer than six cycles of pure Super P air electrode. These results evidently reveal the developed Fe/N/C catalyst holds great promise to serve as an alternative to the conventional Pt-based noble metal catalysts.

Preparation of monodisperse ferrous nanoparticles embedded in carbon aerogels via in situ solid phase polymerization for electrocatalytic oxygen reduction

Core-shell structured materials constructed by using Fe/Fe3C cores and nitrogen doped carbon shells represent a type of promising non-precious oxygen reduction reaction (ORR) catalyst due to well-established active sites at the interface positions. However, the traditional liquid phase polymerization route for preparing such materials normally leads to a compact macropore-deficient structure with randomly dispersed metallic nanoparticles, which is not beneficial for mass transfer and the formation of a high-density dispersion of active sites. Herein, we report an "in situ solid phase polymerization strategy" in which a frozen block containing uniformly dispersed oligomers is firstly achieved by combining a well-controlled hydrothermal reaction and a subsequent liquid nitrogen-facilitated fast solidification. During the following freeze-dry process, the oligomers in situ polymerize into a 3D highly cross-linked network in the confined space of the ice block which not only effectively avoids the direct stacking of polymerized intermediates, but also prevents the agglomeration of metallic nanoparticles. The finally obtained monodisperse Fe/Fe3C nanoparticles embedded in nitrogen-doped carbon aerogel catalyst, in the ORR, delivers an ultrahigh activity as the half-wave potential and the kinetic current density at 0.9 V reach 0.919 V and 7.83 mA cm-2 respectively in an alkaline solution. Using this route, a range of aerogel materials with improved performances for various applications may be explored.

Carbon Nanohorn-Based Electrocatalysts for Energy Conversion

In the context of even more growing energy demands, the investigation of alternative environmentally friendly solutions, like fuel cells, is essential. Given their outstanding properties, carbon nanohorns (CNHs) have come forth as promising electrocatalysts within the nanocarbon family. Carbon nanohorns are conical nanostructures made of sp2 carbon sheets that form aggregated superstructures during their synthesis. They require no metal catalyst during their preparation and they are inexpensively produced in industrial quantities, affording a favorable candidate for electrocatalytic reactions. The aim of this article is to provide a comprehensive overview regarding CNHs in the field of electrocatalysis and especially, in oxygen reduction, methanol oxidation, and hydrogen evolution, as well as oxygen evolution from water splitting, underlining the progress made so far, and pointing out the areas where significant improvement can be achieved.

Trace metals dramatically boost oxygen electrocatalysis of N-doped coal-derived carbon for zinc-air batteries

The commercialization of metal-air batteries requires efficient, low-cost, and stable bifunctional electrocatalysts for reversible electrocatalysis of the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). The modification of natural coal by heteroatoms such as N and S, or metal oxide species, has been demonstrated to form very promising electrocatalysts for the ORR and OER. However, it remains elusive and underexplored as to how the impurity elements in coal may impact the electrocatalytic properties of coal-derived catalysts. Herein, we explore the influence of the presence of various trace metals that are notable impurities in coal, including Al, Si, Ca, K, Fe, Mg, Co, Mn, Ni, and Cu, on the electrochemical performance of the prepared catalysts. The constructed Zn-air batteries are further shown to be able to power green LED lights for more than 80 h. The charge-discharge polarization curves exhibited excellent and durable rechargeability over 500 (ca. 84 h) continuous cycles. The promotional effect of the trace elements is believed to accrue from a combination of electronic structure modification of the active sites, enhancement of the active site density, and formation of a conductive 3-dimensional hierarchical network of carbon nanotubes.

Novel Heteroatom-Doped Fe/N/C Electrocatalysts With Superior Activities for Oxygen Reduction Reaction in Both Acid and Alkaline Solutions

The exploration of noble metal-free catalysts with efficient electrochemical performance toward oxygen reduction reaction in the acid electrolyte is very important for the development of fuel cells technology. Novel pyrolyzed heteroatom-doped Fe/N/C catalysts have been regarded as the most efficient electrocatalytic materials for ORR due to their tunable electronic structure, and distinctive chemical and physical properties. Herein, nitrogen- and sulfur-doped (Fe/N/C and Fe/N/C-S) electrocatalysts were synthesized using ferric chloride hexahydrate as the Fe precursor, N-rich polymer as N precursor, and Ketjen Black EC-600 (KJ600) as the carbon supports. Among these electrocatalysts, the as prepared S and N-doped Fe/N/C-S reveals the paramount ORR activity with a positive half-wave potential value (E _1/2) 0.82 at 0.80 V vs. RHE in 0.1 mol/L H₂SO₄ solution, which is comparable to the commercial Pt/C (Pt 20 wt%) electrocatalyst. The mass activity of the Fe/N/C-S catalyst can reach 45% (12.7 A g^-1 at 0.8 V) and 70% (5.3 A g^-1 at 0.95 V) of the Pt/C electrocatalyst in acidic and alkaline solutions. As result, ORR activity of PGM-free electrocatalysts measured by the rotating-ring disk electrode method increases in the following order: Fe/N/C<Fe/N/C-S, in both basic and acidic medium. This scientific work offers a facile approach to design and synthesizes efficient heteroatom-doped catalytic materials for electrochemical reactions in energy devices.

Hydrogen Evolution Reaction-From Single Crystal to Single Atom Catalysts

Hydrogen evolution reaction (HER) is one of the most important reactions in electrochemistry. This is not only because it is the simplest way to produce high purity hydrogen and the fact that it is the side reaction in many other technologies. HER actually shaped current electrochemistry because it was in focus of active research for so many years (and it still is). The number of catalysts investigated for HER is immense, and it is not possible to overview them all. In fact, it seems that the complexity of the field overcomes the complexity of HER. The aim of this review is to point out some of the latest developments in HER catalysis, current directions and some of the missing links between a single crystal, nanosized supported catalysts and recently emerging, single-atom catalysts for HER.

A General Method for Transition Metal Single Atoms Anchored on Honeycomb-Like Nitrogen-Doped Carbon Nanosheets

Excavating and developing highly efficient and cost-effective nonnoble metal single-atom catalysts for electrocatalytic reactions is of paramount significance but still in its infancy. Herein, reported is a general NaCl template-assisted strategy for rationally designing and preparing a series of isolated transition metal single atoms (Fe/Co/Ni) anchored on honeycomb-like nitrogen-doped carbon matrix (M₁ -HNC-T₁ -T₂ , M = Fe/Co/Ni, T₁ = 500 °C, T₂ = 850 °C). The resulting M₁ -HNC-500-850 with M-N₄ active sites exhibits superior capability for oxygen reduction reaction (ORR) with the half-wave potential order of Fe₁ -HNC-500-850 > Co₁ -HNC-500-850 > Ni₁ -HNC-500-850, in which Fe₁ -HNC-500-850 shows better performance than commercial Pt/C. Density functional theory calculations reveal a choice strategy that the strong p-d-coupled spatial charge separation results the Fe-N₄ effectively merges active electrons for elevating d-band activity in a van-Hove singularity like character. This essentially generalizes an optimal electronic exchange-and-transfer (ExT) capability for boosting sluggish alkaline ORR activity. This work not only presents a universal strategy for preparing single-atom electrocatalyst to accelerate the kinetics of cathodic ORR but also provides an insight into the relationship between the electronic structure and the electrocatalytical activity.

A NH4Cl–NaCl mixed salts assisted pyrolysis route for preparation of a high performance Fe/N/C oxygen reduction reaction catalyst

A mixed salts NH₄Cl + NaCl assisted pyrolysis approach is presented to prepare a highly efficient Fe/N/C electrocatalyst for the oxygen reduction reaction under both acidic and basic conditions.

Atomically dispersed metal–nitrogen–carbon catalysts for fuel cells: advances in catalyst design, electrode performance, and durability improvement

The review provides a comprehensive understanding of the atomically dispersed metal–nitrogen–carbon cathode catalysts for proton-exchange membrane fuel cell applications.

Toward Efficient Carbon and Water Cycles: Emerging Opportunities with Single-Site Catalysts Made of 3d Transition Metals

Advances in the chemical and electrochemical transformation of carbon and water are vital for delivering affordable and environmentally friendly energy sources and chemicals. Central to this challenge is the performance of materials. Traditionally, noble metal particles or metal complexes have been used as catalysts for many reactions. Recently, 3d transition-metal single-site catalysts (3dTM-SSCs) have emerged as potentially transformational candidates for the next-generation high-performance noble-metal-free catalysts. Designing catalysts at the molecular level can lead to a more efficient utilization of metal atoms and at the same time enhance catalytic performance under harsh reaction conditions. Despite this promise, several fundamental issues remain, in particular the structural evolution of 3dTM-SSCs during the synthesis, the molecular-level insights into the structure of the active sites, catalytic mechanisms, and the long-term cycling stability. Here, the material chemistries that facilitate the 3dTM-SSCs generation through a controlled pyrolytic synthesis are discussed, with focus on elucidating the underlying performance descriptors that can tune the catalytic properties in various critical reactions in carbon and water cycles. The current challenges and possible solutions for improving these novel catalytic materials are also highlighted.

Single Fe Atom on Hierarchically Porous S, N-Codoped Nanocarbon Derived from Porphyra Enable Boosted Oxygen Catalysis for Rechargeable Zn-Air Batteries

Iron-nitrogen-carbon materials (Fe-N-C) are known for their excellent oxygen reduction reaction (ORR) performance. Unfortunately, they generally show a laggard oxygen evolution reaction (OER) activity, which results in a lethargic charging performance in rechargeable Zn-air batteries. Here porous S-doped Fe-N-C nanosheets are innovatively synthesized utilizing a scalable FeCl₃ -encapsulated-porphyra precursor pyrolysis strategy. The obtained electrocatalyst exhibits ultrahigh ORR activity (E_1/2 = 0.84 V vs reversible hydrogen electrode) and impressive OER performance (E_{j = 10} = 1.64 V). The potential gap (ΔE = E_{j = 10} - E_1/2 ) is 0.80 V, outperforming that of most highly active bifunctional electrocatalysts reported to date. Furthermore, the key role of S involved in the atomically dispersed Fe-Nx species on the enhanced ORR and OER activities is expounded for the first time by ultrasound-assisted extraction of the exclusive S source (taurine) from porphyra. Moreover, the assembled rechargeable Zn-air battery comprising this bifunctional electrocatalyst exhibits higher power density (225.1 mW cm^-2 ) and lower charging-discharging overpotential (1.00 V, 100 mA cm^-2 compared to Pt/C + RuO₂ catalyst). The design strategy can expand the utilization of earth-abundant biomaterial-derived catalysts, and the mechanism investigations of S doping on the structure-activity relationship can inspire the progress of other functional electrocatalysts.

The identification of active N species in N-doped carbon carriers that improve the activity of Fe electrocatalysts towards the oxygen evolution reaction

Nitrogen-doped carbon nanomaterials have become some of the most effective carriers for transition metal-based electrocatalysts towards the oxygen evolution reaction. However, the specific active nitrogen species in nitrogen-doped carriers remains unclear up to now. To identify the active nitrogen species, herein, we prepare nitrogen-doped carbon nanospheres containing different types of nitrogen species and a small amount of Fe atoms. Electrochemical tests demonstrate that the Fe/nitrogen-doped carbon nanospheres with more graphitic nitrogen exhibit much higher activity for the oxygen evolution reaction than those with more pyridinic nitrogens and pyrrolic nitrogens in alkaline media, revealing that the graphitic nitrogen is the active species that greatly improves the activity of Fe catalysts. Density functional theory calculations further reveal that the graphitic nitrogen enhances the activity and stability of Fe-based catalysts mainly through increasing the adsorption energy, charge and spin densities of the Fe atoms loaded around it. These findings provide a brand-new perspective for rationally designing more effective transition metal-based electrocatalysts for the oxygen evolution reaction through controlling the active graphitic nitrogen distribution in carbon carriers.

Defects on carbons for electrocatalytic oxygen reduction

The exploration of highly active and durable cathodic oxygen reduction reaction (ORR) catalysts with economical production costs is still the bottleneck to realize the large-scale commercialization of fuel cells. In recent years, remarkable progress has been achieved in fabricating effective non-precious metal based ORR catalysts. In particular, modified carbon materials have aroused extensive research interest because of their excellent performance and low cost. In this review, we present an overview on recent advancements in developing defective carbon based materials for catalyzing the ORR. In particular, three general kinds of defective carbon electrocatalysts will be summarized. They are non-metal induced defective carbons (modified by heteroatoms), intrinsic defective carbons (defects created by a physical or chemical method), and atomic metal species induced/coordinated defective carbons (metal-macrocycle complexes with different coordination environments). The common configurations of various defective carbons will be discussed, with typical examples on recently developed both metal-free and precious/non-precious metal species coordinated carbons. Finally, the future research directions of the defective carbon materials are proposed. The newly established defect promoted catalysis mechanism will be beneficial for the design and fabrication of highly effective electrocatalysts for practical energy storage and conversion applications.

Cobalt-Nitrogen-Doped Helical Carbonaceous Nanotubes as a Class of Efficient Electrocatalysts for the Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is of significant importance in the development of fuel cells. Now, cobalt-nitrogen-doped chiral carbonaceous nanotubes (l/d-CCNTs-Co) are presented as efficient electrocatalysts for ORR. The chiral template, N-stearyl-l/d-glutamic acid, induces the self-assembly of well-arranged polypyrrole and the formation of ordered graphene carbon with helical structures at the molecular level after the pyrolysis process. Co was subsequently introduced through the post-synthesis method. The obtained l/d-CCNTs-Co exhibits superior ORR performance, including long-term stability and better methanol tolerance compared to achiral Co-doped carbon materials and commercial Pt/C. DFT calculations demonstrate that the charges on the twisted surface of l/d-CCNTs are widely separated; as a result the Co atoms are more exposed on the chiral CCNTs. This work gives us a new understanding of the effects of helical structures in electrocatalysis.

Highly Graphitic Mesoporous Fe,N-Doped Carbon Materials for Oxygen Reduction Electrochemical Catalysts

The synthesis, characterization, and electrocatalytic properties of mesoporous carbon materials doped with nitrogen atoms and iron are reported and compared for the catalyzed reduction of oxygen gas at fuel cell cathodes. Mixtures of common and inexpensive organic precursors, melamine, and formaldehyde were pyrolyzed in the presence of transition-metal salts (e.g., nitrates) within a mesoporous silica template to yield mesoporous carbon materials with greater extents of graphitization than those of others prepared from small-molecule precursors. In particular, Fe,N-doped carbon materials possessed high surface areas (∼800 m²/g) and high electrical conductivities (∼19 S/cm), which make them attractive for electrocatalyst applications. The surface compositions of the mesoporous Fe,N-doped carbon materials were postsynthetically modified by acid washing and followed by high-temperature thermal treatments, which were shown by X-ray photoelectron spectroscopy to favor the formation of graphitic and pyridinic nitrogen moieties. Such surface-modified materials exhibited high electrocatalytic oxygen reduction activities under alkaline conditions, as established by their high onset and half-wave potentials (1.04 and 0.87 V, respectively vs reversible hydrogen electrode) and low Tafel slope (53 mV/decade). These values are superior to many similar transition-metal- and N-doped carbon materials and compare favorably with commercially available precious-metal catalysts, e.g., 20 wt % Pt supported on activated carbon. The analyses indicate that inexpensive mesoporous Fe,N-doped carbon materials are promising alternatives to precious metal-containing catalysts for electrochemical reduction of oxygen in polymer electrolyte fuel cells.

Sub-50 nm Iron-Nitrogen-Doped Hollow Carbon Sphere-Encapsulated Iron Carbide Nanoparticles as Efficient Oxygen Reduction Catalysts

Sub-50 nm iron-nitrogen-doped hollow carbon sphere-encapsulated iron carbide nanoparticles (Fe3C-Fe,N/C) are synthesized by using a triblock copolymer of poly(styrene-b-2-vinylpyridine-b-ethylene oxide) as a soft template. Their typical features, including a large surface area (879.5 m2 g-1), small hollow size (≈16 nm), and nitrogen-doped mesoporous carbon shell, and encapsulated Fe3C nanoparticles generate a highly active oxygen reduction reaction (ORR) performance. Fe3C-Fe,N/C hollow spheres exhibit an ORR performance comparable to that of commercially available 20 wt% Pt/C in alkaline electrolyte, with a similar half-wave potential, an electron transfer number close to 4, and lower H2O2 yield of less than 5%. It also shows noticeable ORR catalytic activity under acidic conditions, with a high half-wave potential of 0.714 V, which is only 59 mV lower than that of 20 wt% Pt/C. Moreover, Fe3C-Fe,N/C has remarkable long-term durability and tolerance to methanol poisoning, exceeding Pt/C regardless of the electrolyte.

Assembly of Hollow Carbon Nanospheres on Graphene Nanosheets and Creation of Iron-Nitrogen-Doped Porous Carbon for Oxygen Reduction

Triblock copolymer micelles coated with melamine-formaldehyde resin were self-assembled into closely packed two-dimensional (2D) arrangements on the surface of graphene oxide sheets. Carbonizing these structures created a 2D architecture composed of reduced graphene oxide (rGO) sandwiched between two monolayers of sub-40 nm diameter hollow nitrogen-doped carbon nanospheres (N-HCNS). Electrochemical tests showed that these hybrid structures had better performance for oxygen reduction compared to physically mixed rGO and N-HCNS that were not chemically bonded together. Further impregnation of the sandwich structures with iron (Fe) species followed by carbonization yielded Fe_1.6-N-HCNS/rGO-900 with a high specific surface area (968.3 m² g^-1), a high nitrogen doping (6.5 at%), and uniformly distributed Fe dopant (1.6 wt %). X-ray absorption fine structure analyses showed that most of the Fe in the nitrogen-doped carbon framework is composed of single Fe atoms each coordinated to four N atoms. The best Fe_1.6-N-HCNS/rGO-900 catalyst performed better in electrocatalytic oxygen reduction than 20 wt % Pt/C catalyst in alkaline medium, with a more positive half-wave potential of 0.872 V and the same limiting current density. Bottom-up soft-patterning of regular carbon arrays on free-standing 2D surfaces should enable conductive carbon supports that boost the performance of electrocatalytic active sites.

Fe Isolated Single Atoms on S, N Codoped Carbon by Copolymer Pyrolysis Strategy for Highly Efficient Oxygen Reduction Reaction

Heteroatom-doped Fe-NC catalyst has emerged as one of the most promising candidates to replace noble metal-based catalysts for highly efficient oxygen reduction reaction (ORR). However, delicate controls over their structure parameters to optimize the catalytic efficiency and molecular-level understandings of the catalytic mechanism are still challenging. Herein, a novel pyrrole-thiophene copolymer pyrolysis strategy to synthesize Fe-isolated single atoms on sulfur and nitrogen-codoped carbon (Fe-ISA/SNC) with controllable S, N doping is rationally designed. The catalytic efficiency of Fe-ISA/SNC shows a volcano-type curve with the increase of sulfur doping. The optimized Fe-ISA/SNC exhibits a half-wave potential of 0.896 V (vs reversible hydrogen electrode (RHE)), which is more positive than those of Fe-isolated single atoms on nitrogen codoped carbon (Fe-ISA/NC, 0.839 V), commercial Pt/C (0.841 V), and most reported nonprecious metal catalysts. Fe-ISA/SNC is methanol tolerable and shows negligible activity decay in alkaline condition during 15 000 voltage cycles. X-ray absorption fine structure analysis and density functional theory calculations reveal that the incorporated sulfur engineers the charges on N atoms surrounding the Fe reactive center. The enriched charge facilitates the rate-limiting reductive release of OH* and therefore improved the overall ORR efficiency.

Hydrothermal Synthesis of a New Kind of N-Doped Graphene Gel-like Hybrid As an Enhanced ORR Electrocatalyst

In this work, g-C₃N₄@GO gel-like hybrid is obtained by assembling intentionally exfoliated g-C₃N₄ sheets on graphene oxide (GO) sheets under a hydrothermal condition. A specific N-doping process is first designed by heating the g-C₃N₄@GO interlaced hybrid in vacuum to form nitrogen-doped graphene nanosheets (NGS) with high level of pyridinic-N (56.0%) and edge-rich defect structure. The prepared NGS exhibited a great electrocatalysis for oxygen reduction reaction (ORR) in terms of the activity, durability, methanol tolerance, and the reaction kinetics. And the excellent electrocatalytic performance stems from the effective N-doped sites that the nitrogen atom is successfully doped at the defective edges of graphene, and the annealing temperature can play significant role of the doping pattern and location of N. The research provides a new insight into the enhancement of electrocatalysis for ORR based on nonmetal carbons by using the novel N-doping method.

Simultaneous determination of isoproterenol, acetaminophen, folic acid, propranolol and caffeine using a sensor platform based on carbon black, graphene oxide, copper nanoparticles and PEDOT:PSS

We explored the use of carbon black (CB), graphene oxide (GO), copper nanoparticles (CuNPs) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) as electrode materials for the simultaneous determination of isoproterenol, acetaminophen, folic acid, propranolol and caffeine. The designed nanostructured surface was widely characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), contact angle measurements and electrochemistry. From electrochemical characterization assays carried out towards the potassium ferricyanide redox probe, fast electron transfer kinetics and a considerably higher electroactive surface area were observed for the modified electrodic surface based on CB, GO, CuNPs and PEDOT:PSS film. Using square-wave voltammetry (SWV), well defined and resolved anodic peaks were detected for isoproterenol, acetaminophen, folic acid, propranolol and caffeine, with peak-to-peak potential separation not less than 170 mV. Then, the SWV technique was explored for the simultaneous determination of quinary mixtures of these analytes, resulting in analytical curves with linear ranges and limits of detection at micromolar concentration levels. The practical viability of the proposed voltammetric sensor was illustrated in the analysis of human body fluid samples. The proposed sensor showed good repeatability and a successful application using urine and serum matrices, with recoveries close to 100%.

A Bifunctional Highly Efficient FeNx /C Electrocatalyst

Herein, a type of Fe, N-codoped carbon electrocatalyst (FeN_x /C, Fe-N-BCNT#BP) containing bamboo carbon nanotubes and displaying bifunctional high catalytic efficiency for both oxygen reduction reaction (ORR) and carbon dioxide reduction reaction (CO2RR) is reported. It shows high electrocatalytic activity and stability for both the ORR process with onset potential of 1.03 V_RHE in alkaline and the CO2RR to CO with high faradic efficiency up to 90% and selectivity of about 100% at low overpotential of 0.49 V. For CO2RR to CO, it is revealed that Fe₃ C is active but the activity of FeN_x centers is lower than that of C-N-based centers, contrary with that observed for ORR. Due to its low cost and high electrocatalytic performance for these two reduction reactions, the obtained catalyst is very promising for extensive application in future. The revealed huge activity difference of the same types of active sites for different reactions can efficiently guide the synthesis of advanced materials with multifunction.

In Situ Self-Template Synthesis of Fe-N-Doped Double-Shelled Hollow Carbon Microspheres for Oxygen Reduction Reaction

Herein, we reported a special Fe-N-doped double-shelled hollow carbon microsphere (Fe-N-DSC) which was prepared by a facile, in situ polymerization followed by pyrolysis. With porous ferroferric oxide (Fe₃O₄) hollow microspheres as the templates, where pyrrole monomers were dispersed around the outer surface and prefilled the interior space. By adding hydrochloric acid, Fe³⁺ ions were released to initiate polymerization of pyrrole on both the outer and inner surfaces of Fe₃O₄ microspheres until they were completely dissolved, resulting in the Fe-containing polypyrrole double-shelled hollow carbon microspheres (Fe-PPY-DSC). The Fe-PPY-DSC was then pyrolyzed to generate the Fe-N-DSC. The Fe₃O₄ hollow microspheres played trifunctional roles, i.e., the template to prepare a double-shelled hollow spherical structure, the initiator (i.e., Fe³⁺ ions) for the polymerization of pyrrole, and the Fe source for doping. The Fe-N-DSC exhibited a superior catalytic activity for oxygen reduction as comparable to commercial Pt/C catalysts in both alkaline and acidic media. The high catalytic performance was ascribed to the special porous double-shelled hollow spherical structure, which provided more active sites and was beneficial to a high-flux mass transportation.