Control of functional responses via reversible oxygen loss in La₁-xSrxFeO₃-δ films

Layer Resolved Cr Oxidation State Modulation in Epitaxial SrFe0.67Cr0.33O3-δ Thin Films

Understanding how doping influences physicochemical properties of ABO3 perovskite oxides is critical for tailoring their functionalities. In this study, SrFe0.67Cr0.33O3-δ epitaxial thin films were used to examine the effects of Fe and Cr competition on structure and B-site cation oxidation states. The films exhibit a perovskite-like structure near the film/substrate interface, while a brownmillerite-like structure with horizontal oxygen vacancy channels predominates near the surface. Electron energy loss spectroscopy shows Fe remains Fe3+, while Cr varies from ∼Cr3+ (tetrahedral layers) to ∼Cr4+ (octahedral layers) within brownmillerite phases and becomes ∼Cr4.5+ in perovskite-like phases. Theoretical simulations indicate that Cr-O bond arrangements and the way oxygen vacancies interact with Cr and Fe drive Cr charge disproportionation. High-valent Cr cations introduce additional densities of states near the Fermi level, reducing the optical bandgap from ∼2.0 eV (SrFeO2.5) to ∼1.7 eV (SrFe0.67Cr0.33O3-δ). These findings offer insights into B-site cation doping in the perovskite oxide framework.

Effect of ball milling time on Sr0.7Sm0.3Fe0.4Co0.6O2.65 perovskites and their application as semiconductor layers in dye-sensitized solar cells

The practical utilization of TiO2 as a semiconductor in dye-sensitized solar cells (DSSCs) has been set back by poor visible light absorption, high charge carrier recombination, and low electrical conductivity, which reduce the power conversion efficiency (PCE) and sustainability of the device. In this respect, perovskites with excellent properties, such as large surface area, good optical properties, high electrical conductivity, and superior electrochemical stability, have recently emerged as promising alternatives capable of overcoming the drawbacks of TiO2. Herein, Sr0.7Sm0.3Fe0.4Co0.6O2.65 (SSFC) perovskites were prepared via the ball milling method at various milling times of 0, 5, and 10 h, and the obtained samples were denoted by SSFC-0, SSCF-5, and SSCF-10, respectively. Increasing the ball milling time led to a significant reduction in nanoparticle size and agglomeration, which, in turn, increased the surface area and electrical conductivity of the samples. As a consequence, the SSFC-10 perovskite exhibited the smallest average particle sizes (18.9 nm) with the largest surface area (61.8 m2 g-1) and minimum defects, which allowed for efficient electron transport, resulting in the best electrical conductivity of 49.8 S cm-1. Ultimately, DSSCs fabricated using SSFC-10 semiconductor layers achieved an optimum PCE of 6.01 %, which is an improvement of 8.67 %, 1.1 %, and 6.56 % for SSFC-0 (3.69 %), SSFC-5 (4.96 %), and TiO2 (5.64 %), respectively. Thus, varying the ball milling time can be used as an effective technique to tailor the physicochemical properties of SSFC to suit desired applications, particularly the fabrication of highly efficient and sustainable DSSC semiconductor layers.

Informatics-Based Learning of Oxygen Vacancy Ordering Principles in Oxygen-Deficient Perovskites

Ordered oxygen vacancies (OOVs) in perovskites can exhibit long-range order and may be used to direct materials properties through modifications in electronic structures and broken symmetries. Based on the various vacancy patterns observed in previously known compounds, we explore the ordering principles of oxygen-deficient perovskite oxides with ABO2.5 stoichiometry to identify other OOV variants. We performed first-principles calculations to assess the OOV stability on a data set of 50 OOV structures generated from our bespoke algorithm. The algorithm employs uniform planar vacancy patterns on (111) pseudocubic perovskite layers and the approach proves effective for generating stable OOV patterns with minimal computational loads. We find as expected that the major factors determining the stability of OOV structures include coordination preferences of transition metals and elastic penalties resulting from the assemblies of polyhedra. Cooperative rotational modes of polyhedra within the OOV structures reduce elastic instabilities by optimizing the bond valence of A- and B cations. This finding explains the observed formation of vacancy channels along low-index crystallographic directions in prototypical OOV phases. The identified ordering principles enable us to devise other stable vacancy patterns with longer periodicity for targeted property design in yet to be synthesized compounds.

Ion Intercalation in Lanthanum Strontium Ferrite for Aqueous Electrochemical Energy Storage Devices

Ion intercalation of perovskite oxides in liquid electrolytes is a very promising method for controlling their functional properties while storing charge, which opens up its potential application in different energy and information technologies. Although the role of defect chemistry in oxygen intercalation in a gaseous environment is well established, the mechanism of ion intercalation in liquid electrolytes at room temperature is poorly understood. In this study, the defect chemistry during ion intercalation of La_0.5Sr_0.5FeO_3-δ thin films in alkaline electrolytes is studied. Oxygen and proton intercalation into the La_1-xSr_xFeO_3-δ perovskite structure is observed at moderate electrochemical potentials (0.5 to -0.4 V), giving rise to a change in the oxidation state of Fe (as a charge compensation mechanism). The variation of the concentration of holes as a function of the intercalation potential is characterized by in situ ellipsometry, and the concentration of electron holes is indirectly quantified for different electrochemical potentials. Finally, a dilute defect chemistry model that describes the variation of defect species during ionic intercalation is developed.

Dynamics of Anisotropic Oxygen-Ion Migration in Strained Cobaltites

Orientation control of the oxygen vacancy channel (OVC) is highly desirable for tailoring oxygen diffusion as it serves as a fast transport channel in ion conductors, which is widely exploited in solid-state fuel cells, catalysts, and ion-batteries. Direct observation of oxygen-ion hopping toward preferential vacant sites is a key to clarifying migration pathways. Here we report anisotropic oxygen-ion migration mediated by strain in ultrathin cobaltites via in situ thermal activation in atomic-resolved transmission electron microscopy. Oxygen migration pathways are constructed on the basis of the atomic structure during the OVC switching, which is manifested as the vertical-to-horizontal OVC switching under tensile strain but the horizontal-to-diagonal switching under compression. We evaluate the topotactic structural changes to the OVC, determine the crucial role of the tolerance factor for OVC stability, and establish the strain-dependent phase diagram. Our work provides a practical guide for engineering OVC orientation that is applicable to ionic-oxide electronics.

Near-room temperature ferromagnetic insulating state in highly distorted LaCoO2.5 with CoO5 square pyramids

Dedicated control of oxygen vacancies is an important route to functionalizing complex oxide films. It is well-known that tensile strain significantly lowers the oxygen vacancy formation energy, whereas compressive strain plays a minor role. Thus, atomic reconstruction by extracting oxygen from a compressive-strained film is challenging. Here we report an unexpected LaCoO2.5 phase with a zigzag-like oxygen vacancy ordering through annealing a compressive-strained LaCoO3 in vacuum. The synergetic tilt and distortion of CoO5 square pyramids with large La and Co shifts are quantified using scanning transmission electron microscopy. The large in-plane expansion of CoO5 square pyramids weaken the crystal field splitting and facilitated the ordered high-spin state of Co2+, which produces an insulating ferromagnetic state with a Curie temperature of ~284 K and a saturation magnetization of ~0.25 μB/Co. These results demonstrate that extracting targeted oxygen from a compressive-strained oxide provides an opportunity for creating unexpected crystal structures and novel functionalities.

Revealing the role of lattice distortions in the hydrogen-induced metal-insulator transition of SmNiO3

The discovery of hydrogen-induced electronic phase transitions in strongly correlated materials such as rare-earth nickelates has opened up a new paradigm in regulating materials’ properties for both fundamental study and technological applications. However, the microscopic understanding of how protons and electrons behave in the phase transition is lacking, mainly due to the difficulty in the characterization of the hydrogen doping level. Here, we demonstrate the quantification and trajectory of hydrogen in strain-regulated SmNiO₃ by using nuclear reaction analysis. Introducing 2.4% of elastic strain in SmNiO₃ reduces the incorporated hydrogen concentration from ~10²¹ cm⁻³ to ~10²⁰ cm⁻³. Unexpectedly, despite a lower hydrogen concentration, a more significant modification in resistivity is observed for tensile-strained SmNiO₃, substantially different from the previous understanding. We argue that this transition is explained by an intermediate metastable state occurring in the transient diffusion process of hydrogen, despite the absence of hydrogen at the post-transition stage.

Proton doping can induce metal-insulator transitions in rare-earth nickelates, demonstrating the complex interplay between dopants and electronic degrees of freedom. Chen et al. use results on strained films to argue that local proton-induced lattice distortions strongly influence the transition.

Reversible Control of Physical Properties via an Oxygen-Vacancy-Driven Topotactic Transition in Epitaxial La0.7 Sr0.3 MnO3- δ Thin Films

The vacancy distribution of oxygen and its dynamics directly affect the functional response of complex oxides and their potential applications. Dynamic control of the oxygen composition may provide the possibility to deterministically tune the physical properties and establish a comprehensive understanding of the structure-property relationship in such systems. Here, an oxygen-vacancy-induced topotactic transition from perovskite to brownmillerite and vice versa in epitaxial La_0.7 Sr_0.3 MnO_{3- δ} thin films is identified by real-time X-ray diffraction. A novel intermediate phase with a noncentered crystal structure is observed for the first time during the topotactic phase conversion which indicates a distinctive transition route. Polarized neutron reflectometry confirms an oxygen-deficient interfacial layer with drastically reduced nuclear scattering length density, further enabling a quantitative determination of the oxygen stoichiometry (La_0.7 Sr_0.3 MnO_2.65 ) for the intermediate state. Associated physical properties of distinct topotactic phases (i.e., ferromagnetic metal and antiferromagnetic insulator) can be reversibly switched by an oxygen desorption/absorption cycling process. Importantly, a significant lowering of necessary conditions (temperatures below 100 °C and conversion time less than 30 min) for the oxygen reloading process is found. These results demonstrate the potential applications of defect engineering in the design of perovskite-based functional materials.

Strain coupling of oxygen non-stoichiometry in perovskite thin films

The effects of strain and oxygen vacancies on perovskite thin films have been studied in great detail over the past decades and have been treated separately from each other. While epitaxial strain has been realized as a tuning knob to tailor the functional properties of correlated oxides, oxygen vacancies are usually regarded as undesirable and detrimental. In transition metal oxides, oxygen defects strongly modify the properties and functionalities via changes in oxidation states of the transition metals. However, such coupling is not well understood in epitaxial films, but rather deemed as cumbersome or experimental artifact. Only recently it has been recognized that lattice strain and oxygen non-stoichiometry are strongly correlated in a vast number of perovskite systems and that this coupling can be beneficial for information and energy technologies. Recent experimental and theoretical studies have focused on understanding the correlated phenomena between strain and oxygen vacancies for a wide range of perovskite systems. These correlations not only include the direct relationship between elastic strain and the formation energy of oxygen vacancies, but also comprise highly complex interactions such as strain-induced phase transitions due to oxygen vacancy ordering. Therefore, we aim in this review to give a comprehensive overview on the coupling between strain and oxygen vacancies in perovskite oxides and point out the potential applications of the emergent functionalities strongly coupled to oxygen vacancies.

Effect of cation off-stoichiometry on optical absorption in epitaxial LaFeO3 films

The effect of A- and B-site cation deficiency on the optical absorption spectrum is presented for a series of LaFeO_3−δ epitaxial films providing insights into the relationship between defect chemistry and electronic structure in this semiconducting perovskite oxide.

Reversible phase modulation and hydrogen storage in multivalent VO2 epitaxial thin films

Hydrogen, the smallest and the lightest atomic element, is reversibly incorporated into interstitial sites in vanadium dioxide (VO2), a correlated oxide with a 3d(1) electronic configuration, and induces electronic phase modulation. It is widely reported that low hydrogen concentrations stabilize the metallic phase, but the understanding of hydrogen in the high doping regime is limited. Here, we demonstrate that as many as two hydrogen atoms can be incorporated into each VO2 unit cell, and that hydrogen is reversibly absorbed into, and released from, VO2 without destroying its lattice framework. This hydrogenation process allows us to elucidate electronic phase modulation of vanadium oxyhydride, demonstrating two-step insulator (VO2)-metal (HxVO2)-insulator (HVO2) phase modulation during inter-integer d-band filling. Our finding suggests the possibility of reversible and dynamic control of topotactic phase modulation in VO2 and opens up the potential application in proton-based Mottronics and novel hydrogen storage.

Raman scattering in La1-xSrxFeO3-δ thin films: annealing-induced reduction and phase transformation

Raman scattering in thin film La0.2Sr0.8FeO3-δ on MgO(0 0 1) collected at 300 K after different stages of annealing at selected temperatures T (300 K < T < 543 K, to 10 h) and analysis reveal changes in spectral characteristics due to a loss of oxygen, onset of oxygen vacancy-induced disorder, and activation of Raman-inactive modes that are attributed to symmetry lowering. The interpretation is further supported by carrier transport measurements under identical conditions showing orders of magnitude increase in the resistivity induced by oxygen loss. After prolonged annealing in air, evolution of the spectrum signals the appearance of a possible topotactic transformation of the crystal structure from that of the rhombohedral ABO3 perovskites to that of Brownmillerite-like structure consisting of octahedrally and tetrahedrally coordinated Fe atoms.

Low-temperature reduction of brownmillerite CaFeO2.5 in LaAlO3/CaFeO2.5 heterostructures made on SrTiO3

When LaAlO3/CaFeO2.5 thin-film heterostructures made on SrTiO3 were annealed with CaH2 at low temperatures below 300 °C, the brownmillerite CaFeO2.5 layer was reduced to CaFeO2 with an infinite-layer structure while both the LaAlO3 capping layer and the SrTiO3 substrate remained intact. The reduction behaviour strongly depends on the lattice matching of LaAlO3 to CaFeO2.5, suggesting that oxygen ions migrate through the coherently grown LaAlO3 layer of the heterostructure predominantly in the out-of-plane direction. The structural defects near the interface in the relaxed-structure LaAlO3 capping layer prevent the oxygen ions from migrating.

Atomic-scale characterization of oxide thin films gated by ionic liquid

Ionic liquids (ILs) have received considerable interest for use in electrostatic gating in complex oxide systems. Understanding the ionic liquid/oxide interface, and any bias-induced electrochemical degradation, is critical for the interpretation of transport phenomena. The integrity of the interface between ionic liquid 1-ethyl-3-methylimidazolium hexafluorophosphate and La1/3Sr2/3FeO3 under various biasing conditions was examined by analytical transmission electron microscopy, and we report film degradation in the form of an irreversible chemical reaction regardless of the applied bias. This results in an intermixing region of 4-6 nm at the IL/oxide interface. Electron energy loss spectroscopy shows La and Fe migration into the ionic liquid, resulting in secondary phase formation under negative bias. Our approach can be extended to other ionic liquid/oxide systems in order to better understand the electrochemical stability window of these device structures.