Low-temperature remediation of NO catalyzed by interleaved CuO nanoplates

Titania-Supported Cu-Single-Atom Catalyst for Electrochemical Reduction of Acetylene to Ethylene at Low-Concentrations with Suppressed Hydrogen Evolution

Electrochemical acetylene reduction (EAR) is a promising strategy for removing acetylene from ethylene-rich gas streams. However, suppressing the undesirable hydrogen evolution is vital for practical applications in acetylene-insufficient conditions. Herein, Cu single atoms are immobilized on anatase TiO2 nanoplates (Cu-SA/TiO2 ) for electrochemical acetylene reduction, achieving an ethylene selectivity of ≈97% with a 5 vol% acetylene gas feed (Ar balance). At the optimal Cu-single-atom loading, Cu-SA/TiO2 is able to effectively suppress HER and ethylene over-hydrogenation even when using dilute acetylene (0.5 vol%) or ethylene-rich gas feeds, delivering a 99.8% acetylene conversion, providing a turnover frequency of 8.9 × 10-2  s-1 , which is superior to other EAR catalysts reported to date. Theoretical calculations show that the Cu single atoms and the TiO2 support acted cooperatively to promote charge transfer to adsorbed acetylene molecules, whilst also inhibiting hydrogen generation in alkali environments, thus allowing selective ethylene production with negligible hydrogen evolution at low acetylene concentrations.

Molecular nanoarchitectonics: unification of nanotechnology and molecular/materials science

The development of nanotechnology has provided an opportunity to integrate a wide range of phenomena and disciplines from the atomic scale, the molecular scale, and the nanoscale into materials. Nanoarchitectonics as a post-nanotechnology concept is a methodology for developing functional material systems using units such as atoms, molecules, and nanomaterials. Especially, molecular nanoarchitectonics has been strongly promoted recently by incorporating nanotechnological methods into organic synthesis. Examples of research that have attracted attention include the direct observation of organic synthesis processes at the molecular level with high resolution, and the control of organic syntheses with probe microscope tips. These can also be considered as starting points for nanoarchitectonics. In this review, these examples of molecular nanoarchitectonics are introduced, and future prospects of nanoarchitectonics are discussed. The fusion of basic science and the application of practical functional materials will complete materials chemistry for everything.

Chemical conversion based on the crystal facet effect of transition metal oxides and construction methods for sharp-faced nanocrystals

In-depth research has found that the nanocrystal facet of transition metal oxides (TMOs) greatly affects their heterogeneous catalytic performance, as well as the property of photocatalysis, gas sensing, electrochemical reaction, etc. that are all involved in chemical conversion processes. Therefore, the facet-dependent properties of TMO nanocrystals have been fully and carefully studied by combining systematic experiments and theoretical calculations, and mechanisms of chemical reactions are accurately explained at the molecular level, which will be closer to the essence of reactions. Evidently, as an accurate investigation on crystal facets, well-defined TMO nanocrystals are the basis and premise for obtaining relevant credible results, and shape-controlled synthesis of TMO nanocrystals thereby has received great attention and development. The success in understanding of facet-dependent properties and shape-controlled synthesis of TMO nanocrystals is highly valuable for the control of reaction and the design of high-efficiency TMO nanocrystal catalysts as well as other functional materials in practical applications.

Nanoarchitectonics for Hierarchical Fullerene Nanomaterials

Nanoarchitectonics is a universal concept to fabricate functional materials from nanoscale building units. Based on this concept, fabrications of functional materials with hierarchical structural motifs from simple nano units of fullerenes (C60 and C70 molecules) are described in this review article. Because fullerenes can be regarded as simple and fundamental building blocks with mono-elemental and zero-dimensional natures, these demonstrations for hierarchical functional structures impress the high capability of the nanoarchitectonics approaches. In fact, various hierarchical structures such as cubes with nanorods, hole-in-cube assemblies, face-selectively etched assemblies, and microstructures with mesoporous frameworks are fabricated by easy fabrication protocols. The fabricated fullerene assemblies have been used for various applications including volatile organic compound sensing, microparticle catching, supercapacitors, and photoluminescence systems.

Nanoarchitectonics: what's coming next after nanotechnology?

In science and technology today, the crucial importance of the regulation of nanoscale objects and structures is well recognized. The production of functional material systems using nanoscale units can be achieved via the fusion of nanotechnology with the other research disciplines. This task is a part of the emerging concept of nanoarchitectonics, which is a concept moving beyond the area of nanotechnology. The concept of nanoarchitectonics is supposed to involve the architecting of functional materials using nanoscale units based on the principles of nanotechnology. In this focus article, the essences of nanotechnology and nanoarchitectonics are first explained, together with their historical backgrounds. Then, several examples of material production based on the concept of nanoarchitectonics are introduced via several approaches: (i) from atomic switches to neuromorphic networks; (ii) from atomic nanostructure control to environmental and energy applications; (iii) from interfacial processes to devices; and (iv) from biomolecular assemblies to life science. Finally, perspectives relating to the final goals of the nanoarchitectonics approach are discussed.

Flower-Like Superstructures: Structural Features, Applications and Future Perspectives

Mimicking natural objects such as flowers, is an objective of scientists not only because of their attractive appearance, but also to understand the natural phenomena that underpin real world applications such as drug delivery, enzymatic reactions, electronics, and catalysis, to name few. This article reviews the types, preparation methods, and structural features of flower-like structures along with their key applications in various fields. We discuss the various types of flower-like structures composed of inorganic, organic-inorganic hybrid, inorganic-protein, inorganic-enzyme and organic compositions. We also discuss recent development in flower-like structures prepared by self-assembly approaches. Finally, we conclude our review with the future prospects of flower-like micro-structures in key fields, being biomedicine, sensing and catalysis.

Novel investigation of perovskite membrane based electrochemical nitric oxide control phenomenon

The combustion of hydrocarbon fuels within the automotive industry results in harmful and reactive incomplete combustion byproducts. Specifically, nitric oxide emissions (NO) lead to increased smog, acid rain, climate change, and respiratory inflammation within the population [Nitrogen Dioxide | American Lung Association]. Current methods for treating combustion exhaust include the catalytic converter in conjunction with nitrogen oxide traps. However, there is no active, continuous reduction method that does not require restrictions on the combustion environment (Hirata in Catal Surv Asia 18:128-133, 2014). Here, a small voltage potential oscillation across a newly designed electro-chemical catalytic membrane significantly reduces NO emissions. A ceramic membrane consisting of two dissimilar metal electrodes, sandwiching a dielectric layer, is able to achieve an NO reduction in excess of 2X that of a platinum group metal (PGM) three way catalytic converter. An analysis of the exhaust effluent from the membranes indicates N₂O as a precursor to N₂ and O₂ formation, without the introduction of ammonia (NH₃), during the reaction of NO indicating a divergence from current literature. Our results demonstrate how an oscillatory electric potential on a catalytic surface may alter anticipated reaction chemistry and interaction between the catalytic surface and fluid flow.

Low Pt-Content Ternary PtNiCu Nanoparticles with Hollow Interiors and Accessible Surfaces as Enhanced Multifunctional Electrocatalysts

Developing highly active and durable electrocatalysts with low levels of Pt content toward some crucial reactions including oxygen reduction reaction, hydrogen evolution reaction, and methanol oxidation reaction in an acidic electrolyte environment are desirable but still an open challenge for clean and efficient energy conversion. Herein, we present a facile route to synthesize low Pt-content ternary PtNiCu nanostructures with hollow interior and accessible surfaces (H-PtNiCu-AAT NPs) as enhanced multifunctional electrocatalysts. The galvanic replacement reaction and atomic diffusion between in situ preformed CuNi nanocrystals and Pt species should be responsible for the formation of hollow PtNiCu NPs. Continuous activation by acid picking and annealing treatments were performed to leach out the excessive Cu and Ni on the surfaces and to enrich Pt-content on the surface. H-PtNiCu-AAT NPs exhibit excellent activity and durability toward HER, ORR, and MOR due to the rational integration of multiple structural advantages. Strikingly, the mass activity and specific activity of H-PtNiCu-AAT NPs (0.977 A mg_Pt^-1 and 1.458 mA cm^-2) is 7.1 and 6.9 times higher than that of commercial Pt/C (0.138 A mg_Pt^-1 and 0.212 mA cm^-2) toward ORR at 0.9 V (vs RHE), respectively. This present work provides an efficient strategy for the design of low Pt-content trimetallic electrocatalysts with excellent activity and durability.

Nanoarchitectonics from Atom to Life

Functional materials with rational organization cannot be directly created only by nanotechnology-related top-down approaches. For this purpose, a novel research paradigm next to nanotechnology has to be established to create functional materials on the basis of deep nanotechnology knowledge. This task can be assigned to an emerging concept, nanoarchitectonics. In the nanoarchitectonics approaches, functional materials were architected through combination of atom/molecular manipulation, organic chemical synthesis, self-assembly and related spontaneous processes, field-applied assembly, micro/nano fabrications, and bio-related processes. In this short review article, nanoarchitectonics-related approaches on materials fabrications and functions are exemplified from atom-scale to living creature level. Based on their features, unsolved problems for future developments of the nanoarchitectonics concept are finally discussed.

Unravelling the structure sensitivity of CuO/SiO2 catalysts in the NO + CO reaction

CuO/SiO₂ catalysts with vast difference in copper dispersion were prepared by impregnation and ammonia-evaporation methods and used for exploring the structure sensitivity of CuO/SiO₂ catalysts in the NO + CO reaction.

Solvent Effect on the Solvothermal Synthesis of Mesoporous NiO Catalysts for Activation of Peroxymonosulfate to Degrade Organic Dyes

In this work, we successfully prepared three different mesoporous NiO nanostructures with preferential (111) planes using three different solvents-water, a water-ethanol mixture, and a water-ethylene glycol mixture. The NiO nanosheets prepared from the water-ethylene glycol mixture and denoted as NiO-EG showed a nanosheet morphology thinner than 10 nm, whereas the water-ethanol and water samples were 30-40 nm and above 100 nm thick, respectively. The NiO-EG catalyst was found to exhibit a high catalyzing ability to activate peroxymonosulfate (PMS) for decoloring dyes, by which 94.4% of acid orange 7 (AO7) was degraded under the following reaction conditions: AO7 = 50 mg/L, catalyst = 0.2 g/L, PMS = 0.8 g/L, pH = 7, and 30 min reaction time. The dye degradation rate was investigated as a function of the catalyst dosage, pH, and dye concentration. According to quenching experiments, it was found that SO4 •-, HO•, and O2 •- were the dominant radicals for AO7 degradation, and oxygen vacancies played a significant role in the generation of radicals. High surface area, thin flaky structure, rich oxygen vacancies, fast charge transport, and low diffusion impedance all enhanced the catalytic activity of NiO-EG, which exhibited the highest degradation ability due to its abundant accessible active sites for both adsorption and catalysis.

Nanoarchitectonic-Based Material Platforms for Environmental and Bioprocessing Applications

The challenges of pollution, environmental science, and energy consumption have become global issues of broad societal importance. In order to address these challenges, novel functional systems and advanced materials are needed to achieve high efficiency, low emission, and environmentally friendly performance. A promising approach involves nanostructure-level controls of functional material design through a novel concept, nanoarchitectonics. In this account article, we summarize nanoarchitectonic approaches to create nanoscale platform structures that are potentially useful for environmentally green and bioprocessing applications. The introduced platforms are roughly classified into (i) membrane platforms and (ii) nanostructured platforms. The examples are discussed together with the relevant chemical processes, environmental sensing, bio-related interaction analyses, materials for environmental remediation, non-precious metal catalysts, and facile separation for biomedical uses.

Nanoarchitectonics from Molecular Units to Living-Creature-Like Motifs

Important points for the fabrication of functional materials are the creation of nanoscale/molecular-scale units and architecting them into functional materials and systems. Recently, a new conceptual paradigm, nanoarchitectonics, has been proposed to combine nanotechnology and other methodologies including supramolecular chemistry, self-assembly and self-organization to satisfy major features of nanoscience and promote the creation of functional materials and systems. In this account article, our recent research results in materials development based on the nanoarchitectonics concept are summarized in two stories, (i) nanoarchitectonics from fullerenes as the simplest nano-units and (ii) dimension-dependent nanoarchitectonics from various structural units. The former demonstrates creativity of the nanoarchitectonics concept only with simple construction stuffs on materials fabrications, and a wide range of material applicability for the nanoarchitectonics strategy is realized in the latter ones.

Shape-Controlled Metal-Free Catalysts: Facet-Sensitive Catalytic Activity Induced by the Arrangement Pattern of Noncovalent Supramolecular Chains

Metal-free catalytic materials have recently received broad attention as promising alternatives to metal-involved catalysts. This is owing to their inherent capability to overcome the inevitable limitations of metal-involved catalysts, such as high sensitivity to poisoning, the limited reserves, high cost and scarcity of metals (especially noble metals), etc. However, the lack of shape-controlled metal-free catalysts with well-defined facets is a formidable bottleneck limiting our understandings on the underlying structure-activity relationship at atomic/molecular level, which thereby restrains their rational design. Here, we report that catalytically active crystals of a porphyrin, 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin, could be shaped into well-defined cubes and sheet-like tetradecahedrons (TDHD), which are exclusively and predominantly enclosed by {101} and {001} facets, respectively. Fascinatingly, compared to the cubes, the TDHDs display substantially enhanced catalytic activity toward water decontamination under visible-light irradiation, although both the architectures have identical crystalline structure. We disclose that such interesting shape-sensitive catalytic activity is ascribed to the distinct spatial separation efficiency of photogenerated electrons and holes induced by single-channel and multichannel charge transport pathways along noncovalent supramolecular chains, which are arranged as parallel-aligned and 2D network patterns, respectively. Our findings provide an ideal scientific platform to guide the rational design of next-generation metal-free catalysts of desired catalytic performances.

Mesoporous metallic rhodium nanoparticles

Mesoporous noble metals are an emerging class of cutting-edge nanostructured catalysts due to their abundant exposed active sites and highly accessible surfaces. Although various noble metal (e.g. Pt, Pd and Au) structures have been synthesized by hard- and soft-templating methods, mesoporous rhodium (Rh) nanoparticles have never been generated via chemical reduction, in part due to the relatively high surface energy of rhodium (Rh) metal. Here we describe a simple, scalable route to generate mesoporous Rh by chemical reduction on polymeric micelle templates [poly(ethylene oxide)-b-poly(methyl methacrylate) (PEO-b-PMMA)]. The mesoporous Rh nanoparticles exhibited a ∼2.6 times enhancement for the electrocatalytic oxidation of methanol compared to commercially available Rh catalyst. Surprisingly, the high surface area mesoporous structure of the Rh catalyst was thermally stable up to 400 °C. The combination of high surface area and thermal stability also enables superior catalytic activity for the remediation of nitric oxide (NO) in lean-burn exhaust containing high concentrations of O₂.

Mesoporous noble metal nanostructures offer great promise in catalytic applications. Here, Yamauchi and co-workers synthesize mesoporous rhodium nanoparticles using polymeric micelle templates, and report appreciable activities for methanol oxidation and NO remediation.

Direct Growth of CuO Nanorods on Graphitic Carbon Nitride with Synergistic Effect on Thermal Decomposition of Ammonium Perchlorate

Novel graphitic carbon nitride/CuO (g-C₃N₄/CuO) nanocomposite was synthesized through a facile precipitation method. Due to the strong ion-dipole interaction between copper ions and nitrogen atoms of g-C₃N₄, CuO nanorods (length 200–300 nm, diameter 5–10 nm) were directly grown on g-C₃N₄, forming a g-C₃N₄/CuO nanocomposite, which was confirmed via X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and X-ray photoelectron spectroscopy (XPS). Finally, thermal decomposition of ammonium perchlorate (AP) in the absence and presence of the prepared g-C₃N₄/CuO nanocomposite was examined by differential thermal analysis (DTA), and thermal gravimetric analysis (TGA). The g-C₃N₄/CuO nanocomposite showed promising catalytic effects for the thermal decomposition of AP. Upon addition of 2 wt % nanocomposite with the best catalytic performance (g-C₃N₄/20 wt % CuO), the decomposition temperature of AP was decreased by up to 105.5 °C and only one decomposition step was found instead of the two steps commonly reported in other examples, demonstrating the synergistic catalytic activity of the as-synthesized nanocomposite. This study demonstrated a successful example regarding the direct growth of metal oxide on g-C₃N₄ by ion-dipole interaction between metallic ions, and the lone pair electrons on nitrogen atoms, which could provide a novel strategy for the preparation of g-C₃N₄-based nanocomposite.

Hexagonal tungsten oxide nanoflowers as enzymatic mimetics and electrocatalysts

Tungsten oxide (WO_x) has been widely studied for versatile applications based on its photocatalytic, intrinsic catalytic, and electrocatalytic properties. Among the several nanostructures, we focused on the flower-like structures to increase the catalytic efficiency on the interface with both increased substrate interaction capacities due to their large surface area and efficient electron transportation. Therefore, improved WO_x nanoflowers (WONFs) with large surface areas were developed through a simple hydrothermal method using sodium tungstate and hydrogen chloride solution at low temperature, without any additional surfactant, capping agent, or reducing agent. Structural determination and electrochemical analyses revealed that the WONFs have hexagonal Na_0.17WO_3.085·0.17H₂O structure and exhibit peroxidase-like activity, turning from colorless to blue by catalyzing the oxidation of a peroxidase substrate, such as 3,3′,5,5′-tetramethylbenzidine, in the presence of H₂O₂. Additionally, a WONF-modified glassy carbon electrode was adopted to monitor the electrocatalytic reduction of H₂O₂. To verify the catalytic efficiency enhancement by the unique shape and structure of the WONFs, they were compared with calcinated WONFs, cesium WO_x nanoparticles, and other peroxidase-like nanomaterials. The results indicated that the WONFs showed a low Michaelis-Menten constant (k_m), high maximal reaction velocity (v_max), and large surface area.

Hollow CuxO (x = 2, 1) micro/nanostructures: synthesis, fundamental properties and applications

In this review, we comprehensively summarize the important advances in hollow Cu_xO micro/nanostructures, including the universal synthesis strategies, the interfacial Cu–O atomic structures as well as the intrinsic properties, and potential applications. Remarks on emerging issues and promising research directions are also discussed.

Highly selective catalytic reduction of NO via SO2/H2O-tolerant spinel catalysts at low temperature

Selective catalytic reduction of NO X by hydrogen (H2-SCR) in the presence of oxygen has been investigated over the NiCo2O4 and Pd-doped NiCo2O4 catalysts under varying conditions. The catalysts were prepared by a sol-gel method in the presence of oxygen within 50-350 °C and were characterized using XRD, BET, EDS, XPS, Raman, H2-TPR, and NH3-TPD analysis. The results demonstrated that the doped Pd could improve the catalyst reducibility and change the surface acidity and redox properties, resulting in a higher catalytic performance. The performance of NiCo1.95Pd0.05O4 was consistently better than that of NiCo2O4 within the 150-350 °C range at a gas hourly space velocity (GHSV) of 4800 mL g(-1) h(-1), with a feed stream containing 1070 ppm NO, 10,700 ppm H2, 2 % O2, and N2 as balance gas. The effects of GHSV, NO/H2 ratios, and O2 feed concentration on the NO conversion over the NiCo2O4 and NiCo1.95Pd0.05O4 catalysts were also investigated. The two samples similarly showed that an increase in GHSV from 4800 to 9600 mL h(-1) g(-1), the NO/H2 ratio from 1:10 to 1:1, and the O2 content from 0 to 6 % would result in a decrease in NO conversion. In addition, 2 %, 5 %, and 8 % H2O into the feed gas had a slightly negative influence on SCR activity over the two catalysts. The effect of SO2 on the SCR activity indicated that the NiCo1.95Pd0.05O4 possesses better SO2 tolerance than NiCo2O4 catalyst does. Graphical abstract The NiCo1.95Pd0.05O4 catalyst achieved over 90 % NO conversion with N2 selectivity of 100 % in the 200∼250 °C range than the maximum 40.5 % NO conversion over NiCo2O4 with N2 selectivity of approximately 80 % in 350 °C.

Room-Temperature High-Performance H2S Sensor Based on Porous CuO Nanosheets Prepared by Hydrothermal Method

Porous CuO nanosheets were prepared on alumina tubes using a facile hydrothermal method, and their morphology, microstructure, and gas-sensing properties were investigated. The monoclinic CuO nanosheets had an average thickness of 62.5 nm and were embedded with numerous holes with diameters ranging from 5 to 17 nm. The porous CuO nanosheets were used to fabricate gas sensors to detect hydrogen sulfide (H2S) operating at room temperature. The sensor showed a good response sensitivity of 1.25 with respond/recovery times of 234 and 76 s, respectively, when tested with the H2S concentrations as low as 10 ppb. It also showed a remarkably high selectivity to the H2S, but only minor responses to other gases such as SO2, NO, NO2, H2, CO, and C2H5OH. The working principle of the porous CuO nanosheet based sensor to detect the H2S was identified to be the phase transition from semiconducting CuO to a metallic conducting CuS.

Visible-Light-Induced Photoredox Catalysis of Dye-Sensitized Titanium Dioxide: Selective Aerobic Oxidation of Organic Sulfides

TiO2 photoredox catalysis has recently attracted much interest for use in performing challenging organic transformations under mild reaction conditions. However, the reaction scheme is hampered by the fact that TiO2 can only be excited by UV light of wavelengths λ shorter than 385 nm. One promising strategy to overcome this issue is to anchor an organic, preferably metal-free dye onto the surface of TiO2. Importantly, we observed that the introduction of a catalytic amount of the redox mediator TEMPO [(2,2,6,6-tetramethylpiperidin-1-yl)oxyl] ensured the stability of the anchored dye, alizarin red S, thereby resulting in the selective oxidation of organic sulfides with O2. This result affirms the essential role of the redox mediator in enabling the organic transformations by visible-light photoredox catalysis.

NiFe2O4 as an active component of a platinum group metal-free automotive three-way catalyst

To develop a platinum group metal (PGM)-free automotive three-way catalyst (TWC), we investigated the structure–activity relationship for Fe–Ni oxide catalysts and found NiFe₂O₄ with a spinel structure is an active component of the three-way catalytic reaction (NO–C₃H₆–CO–O₂).

A new approach for crystallization of copper(II) oxide hollow nanostructures with superior catalytic and magnetic response

We report the synthesis of copper(II) oxide hollow nanostructures at ambient pressure and close to room temperature by applying the soft templating effect provided by the confinement of droplets in miniemulsion systems. Particle growth can be explained by considering a mechanism that involves both diffusion and reaction control. The catalytic reduction of p-nitrophenol in aqueous media is used as a model reaction to prove the catalytic activity of the materials: the synthesized hollow structures show nearly 100 times higher rate constants than solid CuO microspheres. The kinetic behavior and the order of the reduction reaction change due to the increase of the surface area of the hollow structures. The synthesis also leads to modification of physical properties such as magnetism.

Copper salts mediated morphological transformation of Cu2O from cubes to hierarchical flower-like or microspheres and their supercapacitors performances

Monodisperse Cu₂O of different microstructures, such as cubes, flower-like, and microspheres, have been extensively synthesized by a simple polyol reduction method using different copper salts, i.e. (Cu(acac)₂, Cu(OH)₂, and Cu(Ac)₂·H₂O). The effects of copper salts on the morphology of Cu₂O were investigated in details through various characterization methods, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy and UV-Vis absorption spectra. The effects of morphology on the electrochemical properties were further studied. Among the different structures, Cu₂O with the microspheric morphology shows the highest specific capacitance and the best cycling stability compared with those of the other two structures, thus bear larger volume charge during the electrochemical reaction due to the microspheres of small nanoparticles.

Influence of transition metals (M = Co, Fe and Mn) on ordered mesoporous CuM/CeO2 catalysts and applications in selective catalytic reduction of NOx with H2

Ordered mesoporous Cu/CeO₂ and CuM/CeO₂ (M = Co, Fe and Mn) may serve as promising catalysts for selective catalytic reduction of NO_x.

Synergistic photocatalytic aerobic oxidation of sulfides and amines on TiO2 under visible-light irradiation

Visible-light-induced selective oxygenation of sulfides and oxidative formylation of amines in methanol with dioxygen were synergistically achieved on titanium dioxide.

Selective photocatalytic aerobic oxidation, which can be conducted under ambient conditions, is of great importance towards achieving sustainable chemistry. However, its practical applications are undermined by several challenges, such as low selectivity, sluggish reaction rates, and the requirement of UV light irradiation. Herein, we report a new concept of synergistic photocatalytic oxidation, for which two seemingly irrelevant reactions can be achieved in one photocatalytic system through the synergistic interplay of reactants and catalyst. As proof of concept, two challenging reactions, the aerobic oxidation of sulfide and the aerobic oxidative formylation of amine with methanol, were employed to demonstrate such synergistic photocatalytic aerobic oxidation under visible-light irradiation. This work could pave the way for highly selective photoredox catalysis via rational design based on mechanistic insight.

Bioinspired nanoarchitectonics as emerging drug delivery systems

Bioinspired nanoarchitectonics opens a new era for designing drug delivery systems.