Photocatalytic conversion of CO(2) into renewable hydrocarbon fuels: state-of-the-art accomplishment, challenges, and prospects

Unveiling Advancements: Trends and Hotspots of Metal-Organic Frameworks in Photocatalytic CO2 Reduction

Metal-organic frameworks (MOFs) are robust, crystalline, and porous materials featured by their superior CO2 adsorption capacity, tunable energy band structure, and enhanced photovoltaic conversion efficiency, making them highly promising for photocatalytic CO2 reduction reaction (PCO2RR). This study presents a comprehensive examination of the advancements in MOFs-based PCO2RR field spanning the period from 2011 to 2023. Employing bibliometric analysis, the paper scrutinizes the widely adopted terminology and citation patterns, elucidating trends in publication, leading research entities, and the thematic evolution within the field. The findings highlight a period of rapid expansion and increasing interdisciplinary integration, with extensive international and institutional collaboration. A notable emphasis on significant research clusters and key terminologies identified through co-occurrence network analysis, highlighting predominant research on MOFs such as UiO, MIL, ZIF, porphyrin-based MOFs, their composites, and the hybridization with photosensitizers and molecular catalysts. Furthermore, prospective design approaches for catalysts are explored, encompassing single-atom catalysts (SACs), interfacial interaction enhancement, novel MOF constructions, biocatalysis, etc. It also delves into potential avenues for scaling these materials from the laboratory to industrial applications, underlining the primary technical challenges that need to be overcome to facilitate the broader application and development of MOFs-based PCO2RR technologies.

g-C3N4-Based Photocatalytic Materials for Converting CO2 Into Energy: A Review

Environmental pollution management and renewable energy development are humanity's biggest issues in the 21st century. The rise in atmospheric CO2, which has surpassed 400 parts per million, has stimulated research on CO2 reduction and conversion methods. Presently, photocatalytic conversion of CO2 to valuable hydrocarbons enables the transformation of solar energy into chemical energy and offers a novel avenue for energy conversion while regulating the greenhouse effect. This is an ideal strategy for simultaneously addressing environmental issues and the energy crisis. Photocatalysts are essential to photocatalytic processes. Photocatalyst is the core of photocatalytic technology, and graphite carbon nitride (g-C3N4) has attracted much attention because of its nonmetallic characteristics, and it has the characteristics of low cost, tunable electronic structure, easy manufacture and strong reducibility. However, its activity is not only affected by external reaction conditions, but also by the band gap structure, physical and chemical stability, surface morphology and specific surface area of the photocatalyst it. In this paper, the application progress of g-C3N4-based photocatalytic materials in CO2 reduction is reviewed, and the modification strategies of g-C3N4-based catalysts to obtain better catalytic efficiency and selectivity in CO2 photocatalytic reduction are summarized, and the future development of this material is prospected.

Asymmetric Atomic Dual-Sites for Photocatalytic CO2 Reduction

Atomically dispersed active sites in a photocatalyst offer unique advantages such as locally tuned electronic structures, quantum size effects, and maximum utilization of atomic species. Among these, asymmetric atomic dual-sites are of particular interest because their asymmetric charge distribution generates a local built-in electric potential to enhance charge separation and transfer. Moreover, the dual sites provide flexibility for tuning complex multielectron and multireaction pathways, such as CO2 reduction reactions. The coordination of dual sites opens new possibilities for engineering the structure-activity-selectivity relationship. This comprehensive overview discusses efficient and sustainable photocatalysis processes in photocatalytic CO2 reduction, focusing on strategic active-site design and future challenges. It serves as a timely reference for the design and development of photocatalytic conversion processes, specifically exploring the utilization of asymmetric atomic dual-sites for complex photocatalytic conversion pathways, here exemplified by the conversion of CO2 into valuable chemicals.

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

Atomically precise metal nanoclusters combine with MXene towards solar CO2 conversion

Atomically precise metal nanoclusters (NCs) have been deemed a new generation of photosensitizers for light harvesting on account of their quantum confinement effect, peculiar atom-stacking mode, and enriched catalytic active sites. Nonetheless, to date, precise charge modulation over metal NCs has still been challenging considering their ultra-short carrier lifetime and poor stability. In this work, we conceptually demonstrate the integration of metal NCs with MXene in transition metal chalcogenide (TMC) photosystems via a progressive, exquisite, and elegant interface design to trigger tunable, precise and high-efficiency charge motion over metal NCs, stimulating a directional carrier transport pathway. In this customized ternary heterostructured photosystem, metal NCs function as light-harvesting antennas, MXene serves as a terminal electron reservoir, and the TMC substrate provides suitable energy level alignment for retracting photocarriers of metal NCs, giving rise to a spatial cascade charge transport route and markedly boosting charge separation efficiency. The interface configuration and energy level alignment engineering synergistically contribute to the considerably enhanced visible-light-driven photocatalytic CO2-to-CO reduction performance of the metal NCs/TMCs/MXene heterostructure. The intermediate active species during the photocatalytic CO2 reduction are unambiguously determined, based on which the photocatalytic mechanism is elucidated. Our work will provide an inspiring idea to bridge the gap between atomically precise metal NCs and MXene in terms of controllable charge migration for solar-to-fuel conversion.

Photocatalytic Optical Hollow Fiber with Enhanced Visible-light-driven CO2 Reduction

A visible-light-driven CO2 reduction optical fiber is fabricated using graphene-like nitrogen-doped composites and hollow quartz optical fibers to achieve enhanced activity, selectivity, and light utilization for CO2 photoreduction. The composites are synthesized from a lead-based metal-organic framework (TMOF-10-NH2) and g-C3N4 nanosheet (CNNS) via electrostatic self-assembly. The TMOF-10-NH2/g-C3N4 (TMOF/CNNS) photocatalyst with an S-type heterojunction is coated on optical fiber. The TMOF/CNNS coating, which has a bandgap energy of 2.15 eV, has good photoinduced capability at the coating interfaces, high photogenerated electron-hole pair yield, and high charge transfer rate. The conduction band potential of the TMOF/CNNS coating is more negative than that for CO2 reduction. Moreover, TMOF facilitates the CO desorption on its surface, thereby improving the selectivity for CO production. High CO2 photoreduction and selectivity for CO production is demonstrated by the TMOF/CNNS-coated optical fiber with the cladding/core diameter of 2000/1000 µm, 10 wt% TMOF in CNNS, coating thickness of 25 µm, initial CO2 concentration of 90 vol%, and relative humidity of 88% RH under the excitation wavelength of 380-780 nm. Overall, the photocatalytic hollow optical fiber developed herein provides an effective and efficient approach for the enhancement of light utilization efficiency of photocatalysts and selective CO2 reduction.

Utilization of waste tire derived activated carbon as CO2 capture and photocatalyst for CO2 conversion

The aims of this research were to prepare activated carbon (AC) impregnated with tetraethylenepentamine (TEPA) for use in carbon dioxide (CO2) capture and to then develop the AC-TEPA sorbent with titanium dioxide (TiO2) as a catalyst for photocatalytic reduction. The AC was impregnated with TEPA at three loading levels (2.5, 5, and 10% [w/w]) and then examined for its CO2 adsorption capacity under an ambient temperature and atmospheric pressure. The use of 5% (w/w) TEPA-impregnated AC (AC_5T) provided the highest CO2 adsorption capacity and long-term operation with a regeneration ability for up to 10 cycles. Then, AC_5T-doped TiO2 (AC_5T-TiO2) was prepared as a photocatalytic reduction catalyst, since the presence of carbon and nitrogen in AC_5T could reduce the band gap energy and so enhance the photocatalytic reduction. In addition, the CO2-saturated AC_5T was used as a CO2 source that could be directly converted to valuable chemicals using the AC_5T-TiO2 catalyst under photocatalytic reduction. Products were obtained in both the liquid (methanol) and gaseous (methane, carbon monoxide, and hydrogen) phases. Accordingly, the challenge of this research was to make valuable products from CO2 and to manage waste tires, following the circular economy concept.

Modulation of Photocatalytic CO2 Reduction by n-p Codoping Engineering of Single-Atom Catalysts

Transition metal (TM) single-atom catalysts (SACs) have been widely applied in photocatalytic CO2 reduction. In this work, n-p codoping engineering is introduced to account for the modulation of photocatalytic CO2 reduction on a two-dimensional (2D) bismuth-oxyhalide-based cathode by using first-principles calculation. n-p codoping is established via the Coulomb interactions between the negatively charged TM SACs and the positively charged Cl vacancy (VCl) in the dopant-defect pairs. Based on the formation energy of charged defects, neutral dopant-defect pairs for the Fe, Co, and Ni SACs (PTM0) and the -1e charge state of the Cu SAC-based pair (PCu-1) are stable. The electrostatic attraction of the n-p codoping strengthens the stability and solubility of TM SACs by neutralizing the oppositely charged VCl defect and TM dopant. The n-p codoping stabilizes the electron accumulation around the TM SACs. Accumulated electrons modify the d-orbital alignment and shift the d-band center toward the Fermi level, enhancing the reducing capacity of TM SACs based on the d-band theory. Besides the electrostatic attraction of the n-p codoping, the PCu-1 also accumulates additional electrons surrounding Cu SACs and forms a half-occupied dx2-y2 state, which further upshifts the d-band center and improves photocatalytic CO2 reduction. The metastability of Cl multivacancies limits the concentration of the n-p pairs with Cl multivacancies (PTM@nCl (n > 1)). Positively charged centers around the PTM@nCl (n > 1) hinders the CO2 reduction by shielding the charge transfer to the CO2 molecule.

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

All-Inorganic Perovskite NiTiO3/Cs3Sb2I9 Heterostructure for Photocatalytic CO2 Reduction to CH4 with High Selectivity

Developing efficient and stable halide perovskite-based photocatalysts for highly selectivity reduction CO2 to valuable fuels remains a significant challenge due to their intrinsic instability. Herein, a novel heterostructure featuring 2D Cs3Sb2I9 nanosheets on a 3D flower-like mesoporous NiTiO3 framework using a top-down stepwise membrane fabrication technique is constructed. The unique bilayer heterostructure formed on the 3D mesoporous framework endowed NiTiO3/Cs3Sb2I9 with sufficient and close interface contact, minimizing charge transport distance, and effectively promoting the charge transfer at the interface, thus improving the reaction efficiency of the catalyst surface. As revealed by characterization and calculation, the coupling of Cs3Sb2I9 with NiTiO3 facilitates the hydrogenation process during catalytic, directing reaction intermediates toward highly selective CH4 production. Furthermore, the van der Waals forces inherent in the 3D/2D heterostructure with face-to-face contact provide superior stability, ensuring the efficient realization of photocatalytic CO2 reduction to CH4. Consequently, the optimized 3D/2D NiTiO3/Cs3Sb2I9 heterostructure demonstrates an impressive CH4 yield of 43.4 µmol g-1 h-1 with a selectivity of up to 88.6%, surpassing most reported perovskite-based photocatalysts to date. This investigation contributes to overcoming the challenges of commercializing perovskite-based photocatalysts and paves the way for the development of sustainable and efficient CO2 conversion technologies.

Synergistic effects of covalently coupled eosin-Y with Ben-graphitic carbon nitride framework for improved photocatalytic activity in solar light-driven Biginelli product generation and NADH regeneration

Elevated global pollution level is the prime reason that contributes to the onset of various harmful health diseases. The products of Biginelli reaction are enormously used in the pharmaceutical industry as they have antiviral, antibacterial, and calcium channel modulation abilities. This work reports a novel eosin Y sensitized boron graphitic carbon nitride (EY-Ben-g-C3N4) as a photocatalyst that efficiently produced 3,4-dihydropyrimidine-2-(1H)-one by the Biginelli reaction of benzaldehyde, urea, and methyl acetoacetate. The photocatalyst EY-Ben-g-C3N4 showed a successful generation of 3,4-dihydropyrimidine-2-(1H)-one (Biginelli product) in good yield via photocatalysis which is an eco-friendly method and has facile operational process. In addition to the production of Biginelli products, the photocatalyst also showed a remarkable NADH regeneration of 81.18%. The incorporation of g-C3N4 with boron helps increase the surface area and the incorporation of eosin Y which is an inexpensive and non-toxic dye, and in Ben-g-C3N4, enhanced the light-harvesting capacity of the photocatalyst. The production of 3,4-dihydropyrimidine-2-(1H)-one and NADH by the EY-Ben-g-C3N4 photocatalyst is attributed to the requisite band gap, high molar absorbance, low rate of charge recombination, and increased capacity of the photocatalyst to harvest solar light energy.

Cobalt-based Polymerized Porphyrinic Network for Visible-light-driven CO2 Reduction

Visible-light-driven conversion of carbon dioxide to valuable compounds and fuels is an important but challenging task due to the inherent stability of the CO2 molecules. Herein, we report a series of cobalt-based polymerized porphyrinic network (PPN) photocatalysts for CO2 reduction with high activity. The introduction of organic groups results in the addition of more conjugated electrons to the networks, thereby altering the molecular orbital levels within the networks. This integration of functional groups effectively adjusts the levels of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO). The PPN(Co)-NO2 exhibits outstanding performance, with a CO evolution rate of 12 268 μmol/g/h and 85.8% selectivity, surpassing most similar photocatalyst systems. The performance of PPN(Co)-NO2 is also excellent in terms of apparent quantum yield (AQY) for CO production (5.7% at 420 nm). Density functional theory (DFT) calculations, time-resolved photoluminescence (TRPL), and electrochemical tests reveal that the introduction of methyl and nitro groups leads to a narrower energy gap, facilitating a faster charge transfer. The coupling reaction in this study enables the formation of stable C-C bonds, enhancing the structural regulation, active site diversity, and stability of the catalysts for photocatalytic CO2 reduction. This work offers a facile strategy to develop reliable catalysts for efficient CO2 conversion.

Recent progress on nickel phthalocyanine-based electrocatalysts for CO2 reduction

The electrocatalytic reduction of CO2 to high-value fuels by renewable electricity is a sustainable strategy, which can substitute for fossil fuels and circumvent climate changes induced by elevated CO2 emission levels, making the rational design of versatile electrocatalysts highly desirable. Among all the electrocatalytic materials used in the CO2 reduction reaction, nickel phthalocyanine (NiPc)-based electrocatalysts have attracted considerable attention recently because of their high CO selectivity and catalytic activity. Herein, we review the latest advances in CO2 electroreduction to CO catalyzed by immobilized NiPc and its derivatives on diverse surfaces. Specific strategies, the structure-performance relationship and the CO2-to-CO reaction mechanism of these NiPc-based electrocatalysts are analyzed. Future opportunities and challenges for this series of powerful heterogeneous electrocatalysts are also highlighted.

Synergistic effect of atomically dispersed Cu species and Ti-defects for boosting photocatalytic CO2 reduction over hierarchical TiO2

The photocatalytic water-mediated CO2 reduction reaction, which holds great promise for the conversion of CO2 into valuable chemicals, is often hindered by inefficient separation of photogenerated charges and a lack of suitable catalytic sites. Herein, we have developed a glycerol coordination assembly approach to precisely control the distribution of atomically dispersed Cu species by occupying Ti-defects and adjusting the ratio between Cu species and Ti-defects in a hierarchical TiO2. The optimal sample demonstrates a ∼4-fold improvement in CO2-to-CO conversion compared to normal TiO2 nanoparticles. The high activity could be attributed to the Ti defects, which enhance the photogenerated charge separation and simultaneously facilitate the adsorption of water molecules, thereby promoting the water oxidation reaction. Moreover, by means of in situ EPR and FTIR spectra, we have demonstrated that Cu species can effectively capture photogenerated electrons and facilitate the adsorption of CO2, so as to catalyze the reduction of CO2. This work provides a strategy for the construction of atomic-level synergistic catalytic sites and the utilization of in situ techniques to reveal the underlying mechanism.

CO2 Photoreduction over Semiconducting 2D Materials with Supported Single Atoms: Recent Progress and Challenges

In the face of the growing energy crisis and environmental challenges, substantial efforts are now directed toward sustainable clean energy as a replacement for traditional fossil fuels. CO2 photoreduction into value-added chemicals and fuels is widely recognized as a promising approach to mitigate current energy and environmental concerns. Photocatalysts comprising single atoms (SAs) supported on two-dimensional (2D) semiconducting materials (SAs-2DSemi) have emerged as a novel frontier due to the combined merits of SA catalysts and 2D materials. In this study, we review advancements in metal SAs confined on 2DSemi substrates, categorized into four groups: (1) metal oxide-based, (2) g-C3N4-based, (3) emerging, and (4) hybridized 2DSemi, for photocatalytic CO2 conversion over the past few years. With a particular focus on highlighting the distinct advantages of SAs-2DSemi, we delve into the synthesis of state-of-the-art catalysts, their catalytic performances, and mechanistic elucidation facilitated by experimental characterizations and theoretical calculations. Following this, we outline the challenges in this field and offer perspectives on harnessing the potential of SAs-2DSemi as promising photocatalysts. This comprehensive review aims to provide valuable insights for the future development of 2D photocatalytic materials involving SAs for CO2 reduction.

Stable CO2reduction under natural air on Ni-Sn hydroxide photocatalyst with dynamic renewable oxygen vacancies

Advanced photocatalysts are highly desired to activate the photocatalytic CO2reduction reaction (CO2RR) with low concentration. Herein, the NiSn(OH)6with rich surface lattice hydroxyls was synthesized to boost the activity directly under the natural air. Results showed that terminal Ni-OH could serve as donors to feed protons and generate oxygen vacancies (VO), thus beneficial to convert the activated CO2(HCO3-) mainly into CO (5.60μmol g-1) in the atmosphere. It was flexible and widely applicable for a stable CO2RR from high pure to air level free of additionally adding H2O reactant, and higher than the traditional gas-liquid-solid (1.58μmol g-1) and gas-solid (4.07μmol g-1) reaction system both using high pure CO2and plenty of H2O. The strong hydrophilia by the rich surface hydroxyls allowed robust H2O molecule adsorption and dissociation at VOsites to achieve the Ni-OH regeneration, leading to a stable CO yield (11.61μmol g-1) with the enriched renewable VOregardless of the poor CO2and H2O in air. This work opens up new possibilities for the practical application of natural photosynthesis.

Crystal Engineering of MOF-Derived Bimetallic Oxide Solid Solution Anchored with Au Nanoparticles for Photocatalytic CO2 Reduction to Syngas and C2 Hydrocarbons

Considering that CO2 reduction is mostly a multielectron reaction, it is necessary for the photocatalysts to integrate multiple catalytic sites and cooperate synergistically to achieve efficient photocatalytic CO2 reduction to various products, such as C2 hydrocarbons. Herein, through crystal engineering, we designed and constructed a metal-organic framework-derived Zr/Ti bimetallic oxide solid solution support, which was confirmed by X-ray diffraction, electron microscopy and X-ray absorption spectroscopy. After anchoring Au nanoparticles, the composite photocatalyst exhibited excellent performances toward photocatalytic CO2 reduction to syngas (H2 and CO production rates of 271.6 and 260.6 μmol g-1 h-1) and even C2 hydrocarbons (C2H4 and C2H6 production rates of 6.80 and 4.05 μmol g-1 h-1). According to the control experiments and theoretical calculations, the strong interaction between bimetallic oxide solid solution support and Au nanoparticles was found to be beneficial for binding intermediates and reducing CO2 reduction, highlighting the synergy effect of the catalytic system with multiple active sites.

Ruthenium Single Atomic Sites Surrounding the Support Pit with Exceptional Photocatalytic Activity

Single-metal atomic sites and vacancies can accelerate the transfer of photogenerated electrons and enhance photocatalytic performance in photocatalysis. In this study, a series of nickel hydroxide nanoboards (Ni(OH)x NBs) with different loadings of single-atomic Ru sites (w-SA-Ru/Ni(OH)x) were synthesized via a photoreduction strategy. In such catalysts, single-atomic Ru sites are anchored to the vacancies surrounding the pits. Notably, the SA-Ru/Ni(OH)x with 0.60 wt % Ru loading (0.60-SA-Ru/Ni(OH)x) exhibits the highest catalytic performance (27.6 mmol g-1 h-1) during the photocatalytic reduction of CO2 (CO2RR). Either superfluous (0.64 wt %, 18.9 mmol g-1 h-1; 3.35 wt %, 9.4 mmol-1 h-1) or scarce (0.06 wt %, 15.8 mmol g-1 h-1; 0.29 wt %, 21.95 mmol g-1 h-1; 0.58 wt %, 23.4 mmol g-1 h-1) of Ru sites have negative effect on its catalytic properties. Density functional theory (DFT) calculations combined with experimental results revealed that CO2 can be adsorbed in the pits; single-atomic Ru sites can help with the conversion of as-adsorbed CO2 and lower the energy of *COOH formation accelerating the reaction; the excessive single-atomic Ru sites occupy vacancies that retard the completion of CO2RR.

Synthetic Leaves Based on Crystalline Olefin-Linked Covalent Organic Frameworks for Efficient CO2 Photoreduction with Water

We report, for the first time, a new synthetic strategy for the preparation of crystalline two-dimensional olefin-linked covalent organic frameworks (COFs) based on aldol condensation between benzodifurandione and aromatic aldehydes. Olefin-linked COFs can be facilely crystallized through either a pyridine-promoted solvothermal process or a benzoic anhydride-mediated organic flux synthesis. The resultant COF leaf with high in-plane π-conjugation exhibits efficient visible-light-driven photoreduction of carbon dioxide (CO2) with water (H2O) in the absence of any photosensitizer, sacrificial agents, or cocatalysts. The production rate of carbon monoxide (CO) reaches as high as 158.1 μmol g-1 h-1 with near 100% CO selectivity, which is accompanied by the oxidation of H2O to oxygen. Both theoretical and experimental results confirm that the key lies in achieving exceptional photoinduced charge separation and low exciton binding. We anticipate that our findings will facilitate new possibilities for the development of semiconducting COFs with structural diversity and functional variability.

Use of deep eutectic solvents in environmentally-friendly dye-sensitized solar cells and their physicochemical properties: a brief review

A novel way to mitigate the greenhouse effect is to use dye-sensitized solar cells (DSSCs) to convert carbon dioxide from the air into useful products, such as hydrocarbons, which can also store energy from the sun, a plentiful, clean, and safe resource. The conversion of CO2 can help reduce the impacts of greenhouse gas emissions that contribute to global warming. However, there is a major obstacle in using DSSCs, since many solar devices operate with organic electrolytes, producing pollutants including toxic substances. Therefore, a key research area is to find new eco-friendly electrolytes that can effectively dissolve carbon dioxide. One option is to use deep eutectic solvents (DESs), which are potential substitutes for ionic liquids (ILs) and have similar advantages, such as being customizable, economical, and environmentally friendly. DESs are composed of low-cost materials and have very low toxicity and high biodegradability, making them suitable for use as electrolytes in DSSCs, within the framework of green chemistry. The purpose of this brief review is to explore the existing knowledge about how CO2 dissolves in DESs and how these solvents can be used as electrolytes in solar devices, especially in DSSCs. The physical and chemical properties of the DESs are described, and areas are suggested where further research should be focused.

Nitrogen Doping-Roused Synergistic Active Sites in Perovskite Enabling Highly Selective CO2 Photoreduction into CH4

The intricate protonation process in carbon dioxide reduction usually makes the product unpredictable. Thus, it is significant to control the reactive intermediates to manipulate the reaction steps. Here, we propose that the synergistic La-Ti active sites in the N-La2Ti2O7 nanosheets enable the highly selective carbon dioxide photoreduction into methane. In the photoreduction of CO2 over N-La2Ti2O7 nanosheets, in situ Fourier transform infrared spectra are utilized to monitor the *CH3O intermediate, pivotal for methane production, whereas such monitoring is not conducted for La2Ti2O7 nanosheets. Also, theoretical calculations testify to the increased charge densities on the Ti and La atoms and the regulated formation energy barrier of *CO and *CH3O intermediates by the constructed synergistic active sites. Accordingly, the methane formation rate of 7.97 μL h-1 exhibited by the N-La2Ti2O7 nanosheets, along with an electron selectivity of 96.6%, exceeds that of most previously reported catalysts under similar conditions.

Ferroelectric Polarization and Single-Atom Catalyst Synergistically Promoting CO2 Photoreduction of CuBiP2Se6

Further improving the activity and selectivity of photocatalytic CO2 reduction remains a challenge. Herein, we propose a new strategy for synergistically promoting photocatalytic CO2 reduction by combining two-dimensional (2D) ferroelectric polarization and single-atom catalysis. Our calculations showed that the ferroelectric polarization of CuBiP2Se6 provides the internal driving force for the separation and migration of photogenerated carriers, which provides a prerequisite for enhancing the photocatalytic efficiency. In addition, the introduction of single Ag atoms can act as an electron reservoir to significantly modify the bonding configurations on the surface through proper static electron transfer, thus effectively promoting the adsorption and activation of CO2 molecules. More importantly, we found that switching the ferroelectric polarization can synergistically optimize the limiting potential as well as control the final products. This study provides a new approach for enhancing the catalytic activity and selectivity of photocatalytic CO2 reduction.

Cascade Electrocatalytic and Thermocatalytic Reduction of CO2 to Propionaldehyde

Electrochemical CO2 reduction can convert CO2 to value-added chemicals, but its selectivity toward C3+ products are very limited. One possible solution is to run the reactions in hybrid processes by coupling electrocatalysis with other catalytic routes. In this contribution, we report the cascade electrocatalytic and thermocatalytic reduction of CO2 to propionaldehyde. Using Cu(OH)2 nanowires as the precatalyst, CO2 /H2 O is reduced to concentrated C2 H4 , CO, and H2 gases in a zero-gap membrane electrode assembly (MEA) reactor. The thermochemical hydroformylation reaction is separately investigated with a series of rhodium-phosphine complexes. The best candidate is identified to be the one with the 1,4-bis(diphenylphosphino)butane diphosphine ligand, which exhibits a propionaldehyde turnover number of 1148 under a mild temperature and close-to-atmospheric pressure. By coupling and optimizing the upstream CO2 electroreduction and downstream hydroformylation reaction, we achieve a propionaldehyde selectivity of ~38 % and a total C3 oxygenate selectivity of 44 % based on reduced CO2 . These values represent a more than seven times improvement over the best prior electrochemical system alone or over two times improvement over other hybrid systems.

Metal-organic framework heterojunctions for photocatalysis

Heterojunctions combining two photocatalysts of staggered conduction and valence band energy levels can increase the photocatalytic efficiency compared to their individual components. This activity enhancement is due to the minimization of undesirable charge recombination by the occurrence of carrier migration through the heterojunction interface with separated electrons and holes on the reducing and oxidizing junction component, respectively. Metal-organic frameworks (MOFs) are currently among the most researched photocatalysts due to their tunable light absorption, facile charge separation, large surface area and porosity. The present review summarizes the current state-of-the-art in MOF-based heterojunctions, providing critical comments on the construction of these heterostructures. Besides including examples showing the better performance of MOF heterojunctions for three important photocatalytic processes, such as hydrogen evolution reaction, CO2 photoreduction and dye decolorization, the focus of this review is on describing synthetic procedures to form heterojunctions with MOFs and on discussing the experimental techniques that provide evidence for the operation of charge migration between the MOF and the other component. Special attention has been paid to the design of rational MOF heterojunctions with small particle size and controlled morphology for an appropriate interfacial contact. The final section summarizes the achievements of the field and provides our views on future developments.

Symmetry Breaking Induced Amorphization of Cobalt-Based Catalyst for Boosted CO2 Photoreduction

Photocatalytic reduction of CO2 to energy carriers is intriguing in the industry but kinetically hard to fulfil due to the lack of rationally designed catalysts. A promising way to improve the efficiency and selectivity of such reduction is to break the structural symmetry of catalysts by manipulating coordination. Here, inspired by analogous CoO6 and CoSe6 octahedral structural motifs of the Co(OH)2 and CoSe, a hetero-anionic coordination strategy is proposed to construct a symmetry-breaking photocatalyst prototype of oxygen-deficient Se-doped cobalt hydroxide upon first-principles calculations. Such involvement of large-size Se atoms in CoO6 octahedral frameworks experimentally lead to the switching of semiconductor type of cobalt hydroxide from p to n, generation of oxygen defects, and amorphization. The resultant oxygen-deficient Se,O-coordinated Co-based amorphous nanosheets exhibit impressive photocatalytic performance of CO2 to CO with a generation rate of 60.7 µmol g-1  h-1 in the absence of photosensitizer and scavenger, superior to most of the Co-based photocatalysts. This work establishes a correlation between the symmetry-breaking of catalytic sites and CO2 photoreduction performances, opening up a new paradigm in the design of amorphous photocatalysts for CO2 reduction.

Accelerating Charge Separation and CO2 Photoreduction in Aqueous Phase under Visible Light with Ru Nanoparticles Loaded on Ga-Doped NiTiO3 in a Batch Photoreactor

Titanate perovskite (ATiO3) semiconductors show prospects of being active photocatalysts in the conversion of CO2 to chemical fuels such as methanol (CH3OH) in the aqueous phase. Some of the challenges in using ATiO3 are limited light-harvesting capability, rapid bulk charge recombination, and the low density of catalytic sites participating in CO2 reduction. To address these challenges, Ga-doped NiTiO3 (GNTO) photocatalysts in which Ga ions substitute for Ti ions in the crystal lattice to form electron trap states and oxygen vacancies have been synthesized in this work. The synthesized GNTO was then loaded with Ru nanoparticles to accelerate charge separation and enable excellent CO2 photoreduction activity under visible light. CO2 photoreduction was conducted in a batch photoreactor charged with a 0.1 M NaHCO3 aqueous solution at room temperature and a 3.5 bar pressure using a 1.0 wt % Ru-GNTO photocatalyst to yield methanol at a rate of 84.45 μmol g-1 h-1. A small amount of methane was produced as a side product at 21.35 μmol g-1 h-1, which is also a fuel molecule. We attribute this high catalytic activity toward CO2 photoreduction to a synergistic combination of our novel heterostructured 1.0 wt % Ru-GNTO photocatalyst and the implementation of a pressurized photoreactor. This work demonstrates an effective strategy for metal doping with active nanospecies functionality to improve the performance of ATiO3 photocatalysts in valorizing CO2 to solar fuels.

Cell-derived nanomaterials for biomedical applications

The ever-growing use of nature-derived materials creates exciting opportunities for novel development in various therapeutic biomedical applications. Living cells, serving as the foundation of nanoarchitectonics, exhibit remarkable capabilities that enable the development of bioinspired and biomimetic systems, which will be explored in this review. To understand the foundation of this development, we first revisited the anatomy of cells to explore the characteristics of the building blocks of life that is relevant. Interestingly, animal cells have amazing capabilities due to the inherent functionalities in each specialized cell type. Notably, the versatility of cell membranes allows red blood cells and neutrophils' membranes to cloak inorganic nanoparticles that would naturally be eliminated by the immune system. This underscores how cell membranes facilitate interactions with the surroundings through recognition, targeting, signalling, exchange, and cargo attachment. The functionality of cell membrane-coated nanoparticles can be tailored and improved by strategically engineering the membrane, selecting from a variety of cell membranes with known distinct inherent properties. On the other hand, plant cells exhibit remarkable capabilities for synthesizing various nanoparticles. They play a role in the synthesis of metal, carbon-based, and polymer nanoparticles, used for applications such as antimicrobials or antioxidants. One of the versatile components in plant cells is found in the photosynthetic system, particularly the thylakoid, and the pigment chlorophyll. While there are challenges in consistently synthesizing these remarkable nanoparticles derived from nature, this exploration begins to unveil the endless possibilities in nanoarchitectonics research.

Selectivity regulation of CO2 photoreduction via the electron configuration of active sites on single-atom photocatalysts

The major challenge in the photocatalytic reduction of CO2 is to achieve high conversion efficiency while maintaining selectivity for a single product. Photocatalysts containing single-metal Cu2+ with 3d9 and Zn2+ with 3d10 on g-C3N4 were prepared using a high-energy ball mill. Single-atom Zn inner electron configuration is stable (3d10) and the peripheral empty orbitals act as electron traps to trap photo-generated electrons and improve the efficiency of charge separation; Zn is an active site to enhance the adsorption and activation of CO2. The stable electron configuration can reduce the energy required for the overall reaction and increase the activity while changing the reaction pathway to form CO. As a result, the 0.5 mol% Zn/g-C3N4 (Zn-CN-0.5) photocatalyst achieves ∼100 % selectivity for the photocatalytic reduction of CO2 to CO at a rate of ∼21.1 μmol·g-1·h-1. In contrast, the 0.5 mol% Cu/g-C3N4 (Cu-CN-0.5) photocatalyst with an unstable electronic structure does not exhibit high selectivity.

Study on synergistic effects of 4f levels of erbium and black phosphorus/SnNb2O6 heterostructure catalysts by multiple spectroscopic analysis techniques

Lanthanide single atom modified catalysts are rarely reported because the roles of lanthanide in photocatalysis are difficult to explain clearly. Based on the construction of Er single atom modified black phosphorus/SnNb2O6 (BP/SNO) heterojunctions, the synergistic effect of 4f levels of Er and heterostructures was studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations. According to the Judd-Ofelt theory of lanthanide ions, the CO2 photoreduction test under single wavelength excitation verifies that the 4F7/2/2H11/2 → 4I15/2 emissions of Er in BPEr/SNOEr can be more easily absorbed by SNO and BP, further proving the role of the 4f levels. As a result, the CO and CH4 yields of BPEr/SNOEr-10 under visible light irradiation are 10.7 and 10.1 times higher than those of pure BP, respectively, and 3.4 and 1.5 times higher than those of SNO. The results of DFT calculations show that the Er single atoms can cause surface reconstruction, regulate the active sites of BP, and reduce the energy change value in the key steps (CO2* + H+ + e- → COOH* and COOH* → CO* + H2O). This work provides novel insights into the design of lanthanide single atom photocatalysts for CO2 reduction.

Electrochemical Water Oxidation and CO2 Reduction with a Nickel Molecular Catalyst

Mimicking the photosynthesis of green plants to combine water oxidation with CO2 reduction is of great significance for solving energy and environmental crises. In this context, a trinuclear nickel complex, [NiII3(paoH)6(PhPO3)2]·2ClO4 (1), with a novel structure has been constructed with PhPO32- (phenylphosphonate) and paoH (2-pyridine formaldehyde oxime) ligands and possesses a reflection symmetry with a mirror plane revealed by single-crystal X-ray diffraction. Bulk electrocatalysis demonstrates that complex 1 can homogeneously catalyze water oxidation and CO2 reduction simultaneously. It can catalyze water oxidation at a near-neutral condition of pH = 7.45 with a high TOF of 12.2 s-1, and the Faraday efficiency is as high as 95%. Meanwhile, it also exhibits high electrocatalytic activity for CO2 reduction towards CO with a TOF of 7.84 s-1 in DMF solution. The excellent electrocatalytic performance of the water oxidation and CO2 reduction of complex 1 could be attributed to the two unique µ3-PhPO32- bridges as the crucial factor for stabilizing the trinuclear molecule as well as the proton transformation during the catalytic process, while the oxime groups modulate the electronic structure of the metal centers via π back-bonding. Therefore, apart from the cooperation effect of the three Ni centers for catalysis, simultaneously, the two kinds of ligands in complex 1 can also synergistically coordinate the central metal, thereby significantly promoting its catalytic performance. Complex 1 represents the first nickel molecular electrocatalyst for both water oxidation and CO2 reduction. The findings in this work open an avenue for designing efficient molecular electrocatalysts with peculiar ligands.

Selective Photoreduction of CO2 to CH4 Triggered by Metal-Vacancy Pair Sites

Selectively achieving the photoreduction of carbon dioxide (CO2) to methane (CH4) remains a significant challenge, which primarily arises from the complexity of the protonation process. In this work, we designed metal-vacancy pair sites in defective metal oxide semiconductors, which anchor the reactive intermediates with a bridged linkage for the selective protonation to produce CH4. As an example, oxygen-deficient Nb2O5 nanosheets are synthesized, in which the niobium-oxygen vacancy pair sites are demonstrated by X-ray photoelectron spectroscopy and electron paramagnetic resonance spectra. In situ Fourier transform infrared spectroscopy monitors the *CH3O intermediate, a key intermediate for CH4 production, during the CO2 photoreduction in oxygen-deficient Nb2O5 nanosheets. Importantly, the built metal-vacancy pair sites regulate the *CH3O formation step as a spontaneous process, making the reduction of CO2 to CH4 the preferred method. Therefore, the oxygen-deficient Nb2O5 nanosheets exhibit a CH4 formation rate of 19.14 μmol g-1 h-1, with an electron selectivity of ∼94.1%.

Cu-Based Materials for Enhanced C2+ Product Selectivity in Photo-/Electro-Catalytic CO2 Reduction: Challenges and Prospects

Carbon dioxide conversion into valuable products using photocatalysis and electrocatalysis is an effective approach to mitigate global environmental issues and the energy shortages. Among the materials utilized for catalytic reduction of CO2, Cu-based materials are highly advantageous owing to their widespread availability, cost-effectiveness, and environmental sustainability. Furthermore, Cu-based materials demonstrate interesting abilities in the adsorption and activation of carbon dioxide, allowing the formation of C2+ compounds through C-C coupling process. Herein, the basic principles of photocatalytic CO2 reduction reactions (PCO2RR) and electrocatalytic CO2 reduction reaction (ECO2RR) and the pathways for the generation C2+ products are introduced. This review categorizes Cu-based materials into different groups including Cu metal, Cu oxides, Cu alloys, and Cu SACs, Cu heterojunctions based on their catalytic applications. The relationship between the Cu surfaces and their efficiency in both PCO2RR and ECO2RR is emphasized. Through a review of recent studies on PCO2RR and ECO2RR using Cu-based catalysts, the focus is on understanding the underlying reasons for the enhanced selectivity toward C2+ products. Finally, the opportunities and challenges associated with Cu-based materials in the CO2 catalytic reduction applications are presented, along with research directions that can guide for the design of highly active and selective Cu-based materials for CO2 reduction processes in the future.

Hollow Plasmonic P-Metal-N S-Scheme Heterojunction Photoreactor with Spatially Separated Dual Cocatalysts toward Artificial Photosynthesis

Semiconductor-based step-scheme (S-scheme) heterojunctions possess many merits toward mimicking natural photosynthesis. However, their applications for solar-to-chemical energy conversion are hindered by inefficient charge utilization and unsatisfactory surface reactivity. Herein, two synergistic protocols are demonstrated to overcome these limitations based on the construction of a hollow plasmonic p-metal-n S-scheme heterojunction photoreactor with spatially separated dual noble-metal-free cocatalysts. On one side, plasmonic Au, inserted into the heterointerfaces of CuS@ZnIn2 S4 core-shell nanoboxes, not only accelerates the transfer and recombination of useless charges, enabling a more thorough separation of useful ones for CO2 reduction and H2 O oxidation but also generates hot electrons and holes, respectively injects them into ZnIn2 S4 and CuS, further increasing the number of active carriers participating in redox reactions. On the other side, Fe(OH)x and Ti3 C2 cocatalysts, separately located on the CuS and ZnIn2 S4 surface, enrich the redox sites, adjust the reduction potential and pathway for selective CO2 -to-CH4 transformation, and balance the transfer and consumption of photocarriers. As expected, significantly enhanced activity and selectivity in CH4 production are achieved by the smart design along with nearly stoichiometric ratios of reduction and oxidation products. This study paves the way for optimizing artificial photosynthetic systems via rational interfacial channel introduction and surface cocatalyst modification.

Sn and dual-oxygen-vacancy in the Z-scheme Bi2Sn2O7/Sn/NiAl-layered double hydroxide heterojunction synergistically enhanced photocatalytic activity toward carbon dioxide reduction

Photocatalytic conversion of carbon dioxide (CO2) into high value-added chemicals is an attractive yet challenging process, primarily due to the readily recombination of hole-electron pairs in photocatalysts. Herein, dual-oxygen-vacancy mediated Z-scheme Bi2Sn2O7/Sn/NiAl-layered double hydroxide (VO,O-20BSL) heterojunctions were hydrothermally synthesized and subsequently modified with Sn monomers to enhance photocatalytic activity toward CO2 reduction. The abundance of oxygen vacancies endowed the VO,O-20BSL with extended optical adsorption, enhanced charges separation, and superior CO2 adsorption and activation. The interfacial charges transfer of the VO,O-20BSL was demonstrated to follow a Z-scheme mechanism via photochemical deposition of metal/metal oxide. Under visible light irradiation, the VO,O-20BSL exhibited the highest yields of carbon monoxide (CO) and methane (CH4), with values of 72.03 and 0.85 umol·g-1·h-1, respectively, which were 2.66 and 1.57 times higher than that of the VO-NiAl-layered double hydroxide (VO-1LDH). In situ diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) revealed that carboxylic acid groups (COOH*) and aldehyde groups (CHO*) were the predominant intermediates during CO2 reduction, and accordingly, possible CO2 reduction pathways and mechanism were proposed. This study presents a feasible approach to incorporate dual vacancies into Z-scheme heterojunctions for CO2 reduction.

Photocatalytic CO2 Reduction Coupled with Oxidation of Benzyl Alcohol over CsPbBr3@PANI Nanocomposites

Herein, we successfully prepare conductive polyaniline (PANI)-encapsulated CsPbBr3 perovskite nanocrystals (PNCs) that demonstrate much improved photocatalytic performance and stability toward the CO2 reduction reaction (CRR) coupled with oxidation of benzyl alcohol (BA) to benzaldehyde. Due to the acid-base interaction between CO2 and PANI, CO2 molecules are selectively adsorbed on PANI in the form of carbamate. As a result, the rate of production of CO (rCO) reaches 26.1 μmol g-1 h-1 with a selectivity of 98.1%, which is in good agreement with the rate of oxidation (∼27.0 μmol g-1 h-1) of BA. Such a high reduction/oxidation rate is enabled by the fast electron transfer (∼2.2 ps) from PNCs to PANI, as revealed by femtosecond transient absorption spectroscopy. Moreover, because of the benefit of the encapsulation of PANI, no significant decrease in rCO is observed in a 10 h CRR test. This work offers insight into how to simultaneously achieve improved photocatalytic performance and stability of CsPbX3 PNCs.

Supramolecular self-assemble deficient carbon nitride nanotubes for efficient photocatalytic CO2 reduction

Carbon nitride is an attractive non-metallic photocatalyst due to its small surface area, rapid electron-hole recombination, and low absorption of visible light. In this study, one-dimensional carbon nitride nanotubes were successfully synthesized by supramolecular self-assembly method for photocatalytic reduction of CO2 under mild conditions. The material demonstrates significantly improved CO2-to-CO activity compared to bulk carbon nitride under visible light irradiation, with a rate of 12.58 μmol g-1h-1, which is 3.37 times higher than that of pristine carbon nitride. This enhanced activity can be attributed to the abundant oxygen defects and nitrogen vacancies in the unique tubular carbon nitride structure, which results in the generation of more active sites and the efficient acceleration of the migration of photogenerated electron-hole pairs. Various characterizations collectively support the presence of these defects and vacancies. Moreover, in situ DRIFTS spectroscopy supported the proposed reaction mechanism for the photoreduction of CO2. This eco-friendly design approach provides novel insights into utilizing solar energy for the production of value-added products.

Recent Advances on Single-Atom Catalysts for Photocatalytic CO2 Reduction

The present energy crisis and environmental challenges may be efficiently resolved by converting carbon dioxide (CO2 ) into various useful carbon products. The development of more effective catalysts has been the main focus of current research on photocatalytic CO2 reduction. Due to their high atomic efficiency and superior catalytic activity, single-atom catalysts (SACs) have attracted considerable interest in catalytic CO2 conversion. This review discusses the current research developments, obstacles, and potential of SACs for photocatalytic CO2 reduction. And further, discusses the principle of photocatalytic carbon dioxide reduction. This work has compared and analyzed the effects of support materials and active site types in SACs on photocatalytic CO2 reduction performance. This work believes that by sharing these developments, some inspiration for the rational design and development of stable and effective photocatalytic CO2 reduction catalysts based on SACs can be provided.

Porphyrin Supramolecular Nanoassembly/C3N4 Nanosheet S-Scheme Heterojunctions for Selective Photocatalytic CO2 Reduction toward CO

The photocatalytic reduction of CO2 with H2O into valuable chemicals is a sustainable carbon-neutral technology for renewable energy; however, the photocatalytic activity and product selectivity remain challenging. Herein, an S-scheme heterojunction photocatalyst with superior CO2 photoreduction performance─porous C3N4 (CN) nanosheets anchored with zinc(II) tetra(4-cyanophenyl)porphyrin (ZnTP) nanoassemblies (denoted as ZnTP/CN)─was designed and prepared via a simple self-assembly process. The constructed ZnTP/CN heterojunction had rich accessible active sites, improved CO2 absorption capacity, and high charge carrier separation efficiency caused by the S-scheme heterojunction. As a result, the obtained ZnTP/CN catalyst exhibited considerable activity for photocatalytic CO2 reduction, yielding CO with a generation rate of 19.4 μmol g-1·h-1 and a high selectivity of 95.8%, which is much higher than that of pristine CN nanosheets (4.53 μmol g-1·h-1, 57.4%). In addition, theoretical calculations and in situ Fourier transform infrared spectra demonstrated that the Zn sites in the porphyrin unit favor CO2 activation and *COOH formation as well as CO desorption, thereby affording a high CO selectivity. This work provides insight into the design and fabrication of efficient S-scheme heterostructure photocatalysts for solar energy storage.

Rapid Energy Exchange between In Situ Formed Bromine Vacancies and CO2 Molecules Enhances CO2 Photoreduction

Photocatalytic reduction of CO2 into fuels provides a prospective tactic for regulating the global carbon balance utilizing renewable solar energy. However, CO2 molecules are difficult to activate and reduce due to the thermodynamic stability and chemical inertness. In this work, we develop a novel strategy to promote the adsorption and activation of CO2 molecules via the rapid energy exchange between the photoinduced Br vacancies and CO2 molecules. Combining in situ continuous wave-electron paramagnetic resonance (cw-EPR) and pulsed EPR technologies, we observe that the spin-spin relaxation time (T2) of BiOBr is decreased by 198 ns during the CO2 photoreduction reaction, which is further confirmed by the broadened EPR linewidth. This result reveals that there is an energy exchange interaction between in situ formed Br vacancies and CO2 molecules, which promotes the formation of high-energy CO2 molecules to facilitate the subsequent reduction reaction. In addition, theoretical calculations indicate that the bended CO2 adsorption configuration on the surface of BiOBr with Br vacancies caused the decrease of the lowest unoccupied molecular orbital of the CO2 molecule, which makes it easier for CO2 molecules to acquire electrons and get activated. In situ diffuse reflectance infrared Fourier transform spectroscopy further shows that the activated CO2 molecules are favorably converted to key intermediates of COOH*, resulting in a CO generation rate of 9.1 μmol g-1 h-1 and a selectivity of 100%. This study elucidates the underlying mechanism of CO2 activation at active sites and deepens the understanding of CO2 photoreduction reaction.

Recent advances in perovskite-based Z-scheme and S-scheme heterojunctions for photocatalytic CO2 reduction

The dramatic rise in carbon dioxide levels in the atmosphere caused by the continuous use of carbon fuels continues to have a significant impact on environmental degradation and the disappearance of energy reserves. Past few years have seen a significant increase in the interest in photocatalytic carbon dioxide reduction because of its ability to lower CO2 releases from the burning of fossil fuels while also producing fuels and important chemical products. Because of their excellent catalytic efficiency, great uniformity, lengthy charge diffusion layers and texture flexibility that enable accurate band gap and band line optimization, perovskite-based nanomaterials are perhaps the most advantageous among the numerous semiconductors proficient in accelerating CO2 conversion under visible light. Firstly, a brief insight into photocatalytic CO2 conversion mechanism and structural features of perovskites are discussed. Further the classification and selection of perovskites for Z and S-scheme heterojunctions and their role in photocatalytic CO2 reduction analysed. The efficient modification and engineering of heterojunctions via co-catalyst loading, morphology control and vacancy introduction have been comprehensively reviewed. Third, the state-of-the-art achievements of perovskite-based Z-scheme and S-scheme heterojunctions are systematically summarized and discussed. Finally, the challenges, bottlenecks and future perspectives are discussed to provide a pathway for applying perovskite-based heterojunctions for solar-to-chemical energy conversion.

Exploring the CO2 photocatalytic evolution onto the CuO (1 1 0) surface: A combined theoretical and experimental study

A combined theoretical and experimental study was performed to elucidate the photocatalytic potential of tenorite, CuO (1 1 0) and to assess the evolution pathway of carbon dioxide (CO2) evolution pathway. The calculations were performed with density functional theory (DFT) at a DFT + U + J0 and spin polarized level. The CuO was experimentally synthesized and characterized with structural and optical methodologies. The band structure and density of states revealed the rise of band gaps at 1.24 and 1.03 eV with direct and indirect band gap nature, respectively. These values are in accordance with the experimental evidence at 1.28 and 0.96 eV; respectively, which were obtained by UV-Vis DRS. Such a behavior could be related to enhanced photocatalytic activity among copper oxide materials. Experimental evidence such as SEM images and work function measurements were also performed to evaluate the oxide. The redox potential suggests a catalytic character of tenorite (1 1 0) for the CO2 transformation through aldehydes (methanal) intermediate formation. Furthermore, a route through methylene glycol CH2(OH)2 was also explored with the theoretical methodology. The reaction path exhibits an immediate reduction of Image 1 into a •OH radical and an [OH]- anion, in the first step. This •OH radical attacks a double bond (C = O) of Image 2 to form bicarbonate ([Image 3]-) and subsequently, carbonic acid (Image 4). The carbonic acid reacts with other •OH radical to finally form orthocarbonic acid (Image 5).

Simple ultrasonic integration of shapeable, rebuildable, and multifunctional MIL-53(Fe)@cellulose composite for remediation of aqueous contaminants

Metal-organic frames (MOFs) have been recognized as one of the best candidates in the remediation of aqueous contaminants, while the fragile powder shape restricts the practical implementation. In this work, a shapeable, rebuildable, and multifunctional MOF composite (MIL-53@CF) was prepared from MIL-53 (Fe) and cellulose fiber (CF) using a simple ultrasonic method for adsorption and photocatalytic degradation of organic pollutants in wastewater. The results showed MIL-53(Fe) crystals were uniformly growth on CF surfaces and bonded with surface nanofibrils of CF through physical crosslinking and hydrogen bonding. Because of the high bonding strength, the MIL-53@CF composite exhibited an excellent compressive strength (3.53 MPa). More importantly, the MIL-53@CF composite was rebuildable through mechanical destruction followed by re-ultrasonication, suggesting the excellent reusability of MIL-53@CF for water remediation. The MIL-53@CF composite also had high adsorption capacities for methyl orange (884.6 mg·g-1), methylene blue (198.3 mg·g-1), and tetracycline (106.4 mg·g-1). MIL-53@CF composite could degrade TC through photocatalysis. The photocatalytic degradation mechanism was attributed to the Fe(II)/Fe(III) transform cycle reaction of MIL-53 crystal located on MIL-53@CF. Furthermore, the mechanical property and remoldability of MIL-53@CF composite increased its practicability. Comprehensively, MIL-53@CF composite provided a possible strategy to practically apply MOF in the remediation of aqueous contaminants.

Application of a Metal Cobalt Based on 4,6-Bis(imidazol-1-yl)isophthalicacid Metal-Organic -Framework Materials in Photocatalytic CO2 Reduction, Antibacterial, and Dye Adsorption

In this paper, the reported MOF ([Co(bimip)(H2O)0.5]·0.5H2O) was employed in photocatalytic CO2 reduction, antibacterial, and dye adsorption experiments. The photocatalytic activity of the MOF for CO2 reduction was systematically investigated. The high average CO generation rate of 3421.59 μmol·g-1·h-1 after 12 h confirms the efficient photocatalytic CO2 reduction ability of the MOF. At the same time, the MOF can completely inhibit the growth of S. aureus and C. albicans within 24 h when its concentration reaches 400 μg/mL and 500 μg/mL, respectively. The MOF has an adsorption capacity for CR. The adsorption rate was 83.42% at 60 min, and the adsorption capacity of the MOF for CR reached 500.00 mg·g-1.

Photoelectron "Bridge" in Van Der Waals Heterojunction for Enhanced Photocatalytic CO2 Conversion Under Visible Light

Constructing Van der Waals heterojunction is a crucial strategy to achieve excellent photocatalytic activity. However, in most Van der Waals heterojunctions synthesized by ex situ assembly, electron transfer encounters huge hindrances at the interface between the two components due to the large spacing and potential barrier. Herein, a phosphate-bridged Van der Waals heterojunction of cobalt phthalocyanine (CoPc)/tungsten disulfide (WS2 ) bridged by phosphate (xCoPc-nPO4 - -WS2 ) is designed and prepared by the traditional wet chemistry method. By introducing a small phosphate molecule into the interface of CoPc and WS2 , creates an electron "bridge", resulting in a compact combination and eliminating the space barrier. Therefore, the phosphate (PO4 - ) bridge can serve as an efficient electron transfer channel in heterojunction and can efficiently transmit photoelectrons from WS2 to CoPc under excited states. These excited photoelectrons are captured by the catalytic central Co2+ in CoPc and subsequently convert CO2 molecules into CO and CH4 products, achieving 17-fold enhancement on the 3CoPc-0.6PO4 - -WS2 sample compared to that of pure WS2 . Introducing a small molecule "bridge" to create an electron transfer channel provides a new perspective in designing efficient photocatalysts for photocatalytic CO2 reduction into valuable products.

A high-purity gas-solid photoreactor for reliable and reproducible photocatalytic CO2 reduction measurements

Reactions between a gas phase and a solid material are of high importance in the study of alternative ways for energy conversion utilizing otherwise useless carbon dioxide (CO2). The photocatalytic CO2 reduction to hydrocarbon fuels like e.g., methane (CH4) is such a potential candidate process converting solar light into molecular bonds. In this work, the design, construction, and operation of a high-purity gas-solid photoreactor is described. The design aims at eliminating any unwanted carbon-containing impurities and leak points, ensuring the collection of reliable and reproducible data in photocatalytic CO2 reduction measurements. Apart from the hardware design, a detailed experimental procedure including gas analysis is presented, allowing newcomers in the field of gas-solid CO2 reduction to learn the essential basics and valuable tricks. By performing extensive blank measurements (with/without sample and/or light) the true performance of photocatalytic materials can be monitored, leading to the identification of trends and the proposal of possible mechanisms in CO2 photoreduction. The reproducibility of measurements between different versions of the here presented reactor on the ppm level is evidenced.

Nanoscale Janus Z-Scheme Heterojunction for Boosting Artificial Photosynthesis

Artificial photosynthesis for CO2 reduction coupled with water oxidation currently suffers from low efficiency due to inadequate interfacial charge separation of conventional Z-scheme heterojunctions. Herein, an unprecedented nanoscale Janus Z-scheme heterojunction of CsPbBr3 /TiOx is constructed for photocatalytic CO2 reduction. Benefitting from the short carrier transport distance and direct contact interface, CsPbBr3 /TiOx exhibits significantly accelerated interfacial charge transfer between CsPbBr3 and TiOx (8.90 × 108 s-1 ) compared with CsPbBr3 :TiOx counterpart (4.87 × 107 s-1 ) prepared by traditional electrostatic self-assembling. The electron consumption rate of cobalt doped CsPbBr3 /TiOx can reach as high as 405.2 ± 5.6 µmol g-1 h-1 for photocatalytic CO2 reduction to CO coupled with H2 O oxidation to O2 under AM1.5 sunlight (100 mW cm-2 ), over 11-fold higher than that of CsPbBr3 :TiOx , and surpassing the reported halide-perovskite-based photocatalysts under similar conditions. This work provides a novel strategy to boost charge transfer of photocatalysts for enhancing the performance of artificial photosynthesis.

Two bimetal-doped (Fe/Co, Mn) polyoxometalate-based hybrid compounds for visible-light-driven CO2 reduction

Two polyoxometalate (POM)-based hybrid compounds have been successfully designed and constructed by the hydrothermal method with molecular formulas [K(H₂O)₂FeII0.33Co_0.67(H₂O)₂(DAPSC)]₂{[FeII0.33Co_0.67(H₂O)(DAPSC)]₂[FeII0.33Co_0.67(H₂O)₄]₂[Na₂FeIII4P₄W₃₂O₁₂₀]}·21.5H₂O (1), and [Na(H₂O)₂FeII0.33Mn_0.67(H₂O)₂(DAPSC)]₂{[FeII0.33Mn_0.67(H₂O)(DAPSC)]₂[FeII0.33Mn_0.67(H₂O)₄]₂[Na₂FeIII4P₄W₃₂O₁₂₀(H₂O)₂]}·24H₂O (2) (DAPSC = 2,6-diacetylpyridine bis-(semicarbazone)), respectively. Structural analysis revealed that 1 and 2 consisted of metal-organic complexes containing DAPSC ligands with dumbbell-type inorganic clusters, iron-cobalt (iron-manganese) and some other ions. By utilizing a combination of strongly reducing {P₂W₁₂} units and bimetal-doped centres the CO₂ photoreduction catalytic capacity of 1 and 2 was improved. Notably, the photocatalytic performance of 1 was much better than that of 2. In CO₂ photoreduction, 1 exhibited CO selectivity as high as 90.8%. Furthermore, for 1, the CO generation rate reached 6885.1 μmol g^-1 h^-1 at 8 h with 3 mg, and its better photocatalytic performance was presumably due to the introduction of cobalt and iron elements to give 1 a more appropriate energy band structure. Further recycling experiments indicated that 1 was a highly efficient CO₂ photoreduction catalyst, which could still possess catalytic activity after several cycles.

Enhanced photocatalytic CO2 reduction on biomineralized CdS via an electron conduit in bacteria

There is an increasing trend in semi-artificial photosynthesis systems that combine living cells with inorganic semiconductors to activate a bacterial catalytic network. However, these systems face various challenges, including electron-hole recombination, photocorrosion, and the generation of photoexcited radicals by semiconductors, all of which impair the efficiency, stability, and sustainability of biohybrids. We first focus on a reverse strategy to improve highly efficient CO₂ photoreduction on biosynthesized inorganic semiconductors using an electron conduit in the electroactive bacterium S. oneidensis MR-1. Due to the suppressed charge recombination and photocorrosion on CdS, the maximum photocatalytic production rate of formate in water was 2650 μmol g^-1 h^-1 (with a selectivity of ca.100%), which ranks high among all photocatalysts and is the highest for inorganic-biological hybrid systems in an all-inorganic aqueous environment. The reverse enhancement effect of electrogenic bacteria on photocatalysis on semiconductors inspires new insight to develop a new generation of bio-semiconductor catalysts for solar chemical production.

Armchair Janus WSSe Nanotube Designed with Selenium Vacancy as a Promising Photocatalyst for CO2 Reduction

Photocatalytic conversion of carbon dioxide into chemical fuels offers a promising way to not only settle growing environmental problems but also provide a renewable energy source. In this study, through first-principles calculation, we found that the Se vacancy introduction can lead to the transition of physical-to-chemical CO₂ adsorption on Janus WSSe nanotube. Se vacancies work at the adsorption site, which significantly improves the amount of transferred electrons at the interface, resulting in the enhanced electron orbital hybridization between adsorbents and substrates, and promising the high activity and selectivity for carbon dioxide reduction reaction (CO₂RR). Under the condition of illumination, due to the adequate driving forces of photoexcited holes and electrons, oxygen generation reaction (OER) and CO₂RR can occur spontaneously on the S and Se sides of the defective WSSe nanotube, respectively. The CO₂ could be reduced into CH₄, meanwhile, the O₂ is produced by the water oxidation, which also provides the hydrogen and electron source for the CO₂RR. Our finding reveals a candidate photocatalyst for obtaining efficient photocatalytic CO₂ conversion.

Photothermal Catalytic CO2 Conversion: Beyond Catalysis and Photocatalysis

In recent years, the combination of both thermal and photochemical contributions has provided interesting opportunities for solar upgrading of catalytic processes. Photothermal catalysis works at the interface between purely photochemical processes, which involve the direct conversion of photon energy into chemical energy, and classical thermal catalysis, in which the catalyst is activated by temperature. Thus, photothermal catalysis acts in two different ways on the energy path of the reaction. This combined catalysis, of which the fundamental principles will be reviewed here, is particularly promising for the activation of small reactive molecules at moderate temperatures compared to thermal catalysis and with higher reaction rates than those attained in photocatalysis, and it has gained a great deal of attention in the last years. Among the different applications of photothermal catalysis, CO₂ conversion is probably the most studied, although reaction mechanisms and photonic-thermal synergy pathways are still quite unclear and, from the reaction route point of view, it can be said that photothermal-catalytic CO₂ reduction processes are still in their infancy. This article intends to provide an overview of the principles underpinning photothermal catalysis and its application to the conversion of CO₂ into useful molecules, with application essentially as fuels but also as chemical building blocks. The most relevant specific cases published to date will be also reviewed from the viewpoint of selectivity towards the most frequent target products.