Live-cell SERS endoscopy using plasmonic nanowire waveguides

Perspective on Tailored Nanostructure-Dominated SPP Effects for SERS

Localized surface plasmon resonance (LSPR) excited by an incident light can normally produce strong surface-enhanced Raman scattering (SERS) at the nanogaps among plasmonic nano-objects (so-called hot spots), which is extensively explored. In contrast, surface plasmon polaritons (SPPs) that can be generated by an incident beam via particular structures with a conservation of wave vectors can excite SERS effects as well. SPPs actually play an indispensable role in high-performance SERS devices but receive much less attention. In this perspective, SPPs and their couplings with LSPR for SERS excitations with differing effectiveness through particular plasmonic/dielectric structures/configurations, along with relevant fabrication approaches, are profoundly reviewed and commented on from a unique perspective from in situ to ex situ excitations of SERS enabled by spatiotemporally separated multiple processes of SPPs. Quantitative design of particular configurations/architectures enabling highly efficient and effective multiple processes of SPPs is particularly emphasized as one giant leap toward ultimate full quantitative design of intrinsically high-performance SERS chips and very critical for their batch manufacturability and applications as well. The viewpoints and prospects about innovative SERS devices based on tailored structure-dominated SPPs effects and their coupling with LSPR are presented and discussed.

Acoustofluidic lysis of cancer cells and Raman spectrum profiling

The lysis of cancer cells inside a sessile droplet was performed using traveling surface acoustic waves (SAWs) without any chemical reagents. Raman spectrum profiling was then carried out to explore detailed cell-derived data. The Rayleigh waves formed by an interdigital transducer were made to propagate along the surface of an LiNbO3 substrate. Polystyrene microparticles (PSMPs) were used to establish mechanical cell lysis effectively, and gold nanoparticles (AuNPs) were added to enhance the Raman signals from the lysed cells by SAWs. The lysis efficiency was evaluated according to the size and concentration of the PSMPs in experiments where the frequency was varied. Lysis occurred mainly by mechanical collision using PSMPs in a high-frequency domain, and the lysis efficiency was improved by increasing the application time and the energy density of the SAWs. Raman signals from the lysed cells were greatly enhanced by nanogaps formed by the AuNPs, which were evenly distributed irrespective of the SAWs through the frequency-independent behavior of the AuNPs. Finally, detailed Raman spectra of MDA-MB-231, malignant breast cancer cells, were acquired, and various organic matter-derived peaks were observed. The 95% confidence region for cells subjected to lysis was more widely distributed than that of cells not subjected to lysis. The proposed SAW platform is expected to facilitate the detection of small quantities and to be applied in biomedical applications.

Hot-Electron Dynamics Mediated Medical Diagnosis and Therapy

Surface plasmon resonance excitation significantly enhances the absorption of light and increases the generation of "hot" electrons, i.e., conducting electrons that are raised from their steady states to excited states. These excited electrons rapidly decay and equilibrate via radiative and nonradiative damping over several hundred femtoseconds. During the hot-electron dynamics, from their generation to the ultimate nonradiative decay, the electromagnetic field enhancement, hot electron density increase, and local heating effect are sequentially induced. Over the past decade, these physical phenomena have attracted considerable attention in the biomedical field, e.g., the rapid and accurate identification of biomolecules, precise synthesis and release of drugs, and elimination of tumors. This review highlights the recent developments in the application of hot-electron dynamics in medical diagnosis and therapy, particularly fully integrated device techniques with good application prospects. In addition, we discuss the latest experimental and theoretical studies of underlying mechanisms. From a practical standpoint, the pioneering modeling analyses and quantitative measurements in the extreme near field are summarized to illustrate the quantification of hot-electron dynamics. Finally, the prospects and remaining challenges associated with biomedical engineering based on hot-electron dynamics are presented.

SERS Endoscopy for Monitoring Intracellular Drug Dynamics

Understanding the dynamics and distribution of medicinal drugs in living cells is essential for the design and discovery of treatments. The tools available for revealing this information are, however, extremely limited. Here, we report the application of surface-enhanced Raman scattering (SERS) endoscopy, using plasmonic nanowires as SERS probes, to monitor the intracellular fate and dynamics of a common chemo-drug, doxorubicin, in A549 cancer cells. The unique spatio-temporal resolution of this technique reveals unprecedented information on the mode of action of doxorubicin: its localization in the nucleus, its complexation with medium components, and its intercalation with DNA as a function of time. Notably, we were able to discriminate these factors for the direct administration of doxorubicin or the use of a doxorubicin delivery system. The results reported here show that SERS endoscopy may have an important future role in medicinal chemistry for studying the dynamics and mechanism of action of drugs in cells.

Optical Control of the Localized Surface Plasmon Resonance in a Heterotype and Hollow Gold Nanosheet

The remote excitation and remote-controlling of the localized surface plasmon resonance (LSPR) in a heterotype and hollow gold nanosheet (HGNS) is studied using FDTD simulations. The heterotype HGNS contains an equilateral and hollow triangle in the center of a special hexagon, which forms a so-called hexagon-triangle (H-T) heterotype HGNS. If we focus the incident-exciting laser on one of the vertexes of the center triangle, the LSPR could be achieved among other remote vertexes of the outer hexagon. The LSPR wavelength and peak intensity depend sensitively on factors such as the polarization of the incident light, the size and symmetry of the H-T heterotype structure, etc. Several groups of the optimized parameters were screened out from numerous FDTD calculations, which help to further obtain some significant polar plots of the polarization-dependent LSPR peak intensity with two-petal, four-petal or six-petal patterns. Remarkably, based on these polar plots, the on-off switching of the LSPR coupled among four HGNS hotspots could be remote-controlled simply via only one polarized light, which shows promise for its potential application in remote-controllable surface-enhanced Raman scattering (SERS), optical interconnects and multi-channel waveguide switches.

Design and Synthesis of SERS Materials for In Vivo Molecular Imaging and Biosensing

Surface-enhanced Raman scattering (SERS) is a feasible and ultra-sensitive method for biomedical imaging and disease diagnosis. SERS is widely applied to in vivo imaging due to the development of functional nanoparticles encoded by Raman active molecules (SERS nanoprobes) and improvements in instruments. Herein, the recent developments in SERS active materials and their in vivo imaging and biosensing applications are overviewed. Various SERS substrates that have been successfully used for in vivo imaging are described. Then, the applications of SERS imaging in cancer detection and in vivo intraoperative guidance are summarized. The role of highly sensitive SERS biosensors in guiding the detection and prevention of diseases is discussed in detail. Moreover, its role in the identification and resection of microtumors and as a diagnostic and therapeutic platform is also reviewed. Finally, the progress and challenges associated with SERS active materials, equipment, and clinical translation are described. The present evidence suggests that SERS could be applied in clinical practice in the future.

Toward a New Era of SERS and TERS at the Nanometer Scale: From Fundamentals to Innovative Applications

Surface-enhanced Raman scattering (SERS) and tip-enhanced Raman scattering (TERS) have opened a variety of exciting research fields. However, although a vast number of applications have been proposed since the two techniques were first reported, none has been applied to real practical use. This calls for an update in the recent fundamental and application studies of SERS and TERS. Thus, the goals and scope of this review are to report new directions and perspectives of SERS and TERS, mainly from the viewpoint of combining their mechanism and application studies. Regarding the recent progress in SERS and TERS, this review discusses four main topics: (1) nanometer to subnanometer plasmonic hotspots for SERS; (2) Ångström resolved TERS; (3) chemical mechanisms, i.e., charge-transfer mechanism of SERS and semiconductor-enhanced Raman scattering; and (4) the creation of a strong bridge between the mechanism studies and applications.

Metallic On-Chip Light Concentrators Fabricated by In Situ Plasmonic Etching Technique

One-dimensional tapered metallic nanostructures are highly interesting for nanophotonic applications because of their plasmonic waveguiding and field-focusing properties. Here, we developed an in situ etching technique for unique tapered crystallized silver nanowire fabrication. Under the focused laser spot, plasmon-induced charge separation of chemically synthesized nanowires is excited, which triggers the uniaxial etching of silver nanowires along the radial direction with decreasing rate, forming tapered structures several micrometers long and with diameter attenuating from hundreds to tens of nanometers. These tapered metallic nanowires have smooth surfaces showing excellent performance for plasmonic waveguiding, and can be good candidates for nanocircuits and remote-excitation sources.

Correlations between incident and emission polarization in nanowire-particle coupled junctions

Plasmonic nanostructures with subwavelength confinement are of great importance for the development of integrated nanophotonic circuits and devices. Here, we experimentally investigate how the polarization of the emitted light from nanowire-particle junction relies on the incident polarization. We demonstrate that the correlations can be effectively modulated by the particle position relative to the wire. By varying the wire-particle gap with only several nanometers, the nanowire-particle junction can be changed from polarization maintainer to rotator. Then, by moving the particle along the wire within half of the surface plasmon polariton (SPP) beat, the polarization behaviors can be tuned from positive to negative correlation. The mechanism can be well understood by the hybridization of wire-particle coupled mode and propagating SPP modes, which is verified by finite-difference time-domain simulations. These findings would provide a new degree of freedom for manipulating light polarization at the nanometer scale and additional flexibility for constructing nanophotonic devices.

Simplified numerical modeling for Fano interference-induced asymmetric light reflectance effect using equivalent medium theory

Localized surface plasmons exhibit promising capabilities in optoelectronic devices. In most cases, the metal nanoparticle arrays are located on interfaces or inside optical cavities. Fano interferences have been observed and explained via the interference between the waves generated by the localized surface plasmon and dielectric interfaces. Conventionally, these Fano interferences are modeled using the modified Fresnel equation. However, certain issues persist in the fundamental physics or in the numerical calculation process. Here, we adopt the equivalent medium theory (Maxwell-Garnett theory, MGT) to calculate and elucidate Fano interferences in different structures, in the region comprising nanoparticle arrays and dielectrics equivalent to a homogeneous layer of media via the mean field theory. Using this method, the Fano interference can be modeled by mixing different materials, i.e., metals and dielectrics in these cases. Furthermore, a multiple-layered equivalent medium theory is proposed to significantly improve the scalability of this simplified numerical method. In other words, this method can be easily extended to nanoparticles with different shapes, sizes, and materials; in addition, it exhibits robust practicability. Compared with the modified Fresnel equation and finite-difference time-domain methods, this MGT-based method can effectively minimize the calculation process, which is beneficial to the prospective application of plasmon photonics.

Modulating the plasmon-mediated silver oxidation using thiophenol molecules as monitored by in situ SERS spectroscopy

Effective charge separation is essential in plasmon-mediated photochemistry and is usually achieved by constructing plasmon-semiconductor interfaces, which is usually challenging. In this work, by monitoring the plasmon-mediated silver oxidation with in situ Raman spectroscopy, we demonstrate that the adsorbed thiophenol molecules could modulate the rate of photochemical reactions by tuning the charge separation at the plasmon-molecule interfaces. It is found that the thiophenol molecules with strong electron-withdrawing or donating functional groups could accelerate or decelerate the rate of plasmon-mediated silver oxidation, respectively. Owing to the easy tuning of the electronic structures of organic molecules via substitution, our method provides a versatile and convenient approach for the fine modulation of plasmon-mediated photochemical reactions.

Metallic nanosphere-assisted coupling ultrafast surface plasmon polaritons background-free tip nanofocusing

Plasmonic tip nanofocusing has gained much attention owing to its wide application in the field of nanospectroscopy. Here, we present the Au nanosphere (AuNS)-assisted coupling ultrafast surface plasmon polaritons (SPP) background-free tip nanofocusing. The plasmonic tip was prepared by attaching an AuNS on the shaft of an Au conical tip fabricated by electrochemical etching. The AuNS was adopted as an antenna to couple the far-field excitation light to the propagating SPP along the shaft to the tip apex for achieving power compression. Importantly, we experimentally and theoretically demonstrate that such a plasmonic tip can realize background-free ultrafast SPP tip nanofocusing with radially polarized features in a wide spectral range based on the localized SPP resonance effect supported by AuNS. Furthermore, the intensity of the tip nanofocusing light field has strong polarization dependence under linearly polarized light excitation, providing a powerful platform for spatiotemporal light control on the nanoscale. Our technique realizes remote excitation of background-free tip nanofocusing with a structured light feature, and it holds promising potential for tip-enhanced nanospectroscopies, nonlinear nanophotonics, etc.

Nanostructure-based surface-enhanced Raman scattering for diagnosis of cancer

Cancer is a malignant disease that seriously affects human health and life. Early diagnosis and timely treatment can significantly improve the survival rate of cancer patients. Surface-enhanced Raman scattering (SERS) is an optical technology that can detect and image samples at the single-molecule level. It has the advantages of rapidity, high specificity, high sensitivity and no damage to the sample. The performance of SERS is highly dependent on the properties, size and morphology of the SERS substrate. Preparation of SERS substrates with good reproducibility and chemical stability is a key factor in realizing the wide application of SERS technology in cancer diagnosis. In this review we provide a detailed presentation of the latest research on SERS in cancer diagnosis and the detection of cancer biomarkers, mainly focusing on nanotechnological approaches in cancer diagnosis by using SERS. We also consider the future development of nanostructure-based SERS in cancer diagnosis.

Low-Background Tip-Enhanced Raman Spectroscopy Enabled by a Plasmon Thin-Film Waveguide Probe

Tip-enhanced Raman spectroscopy (TERS) is a nano-optical approach to extract spatially resolved chemical information with nanometer precision. However, in the case of direct-illumination TERS, which is often employed in commercial TERS instruments, strong fluorescence or far-field Raman signals from the illuminated areas may be excited as a background. They may overwhelm the near-field TERS signal and dramatically decrease the near-field to far-field signal contrast of TERS spectra. It is still challenging for TERS to study the surface of fluorescent materials or a bulk sample that cannot be placed on an Au/Ag substrate. In this study, we developed an indirect-illumination TERS probe that allows a laser to be focused on a flat interface of a thin-film waveguide located far away from the region generating the TERS signal. Surface plasmon polaritons are generated stably on the waveguide and eventually accumulated at the tip apex, thereby producing a spatially and energetically confined hotspot to ensure stable and high-resolution TERS measurements with a low background. With this thin-film waveguide probe, TERS spectra with obvious contrast from a diamond plate can be acquired. Furthermore, the TERS technique based on this probe exhibits excellent TERS signal stability, a long lifetime, and good spatial resolution. This technique is expected to have commercial potential and enable further popularization and development of TERS technology as a powerful analytical method.

Free-Standing Single Ag Nanowires for Multifunctional Optical Probes

Miniaturized and manipulable optical probes are the foundation for developing in situ characterization devices in confined space. We developed two methods for fabricating free-standing single Ag nanowires (AgNWs) directly at the tip of a glass capillary either by chemical or electrochemical reduction. The electrochemical nature of both methods resulted in a rapid growth rate of AgNWs up to 1.38 μm/s and a controllable length from 5 to 450 μm. The AgNWs with a unique anisotropic structure allow localized surface plasmon resonance and surface plasmon waveguides in the radial direction and axial direction, respectively. We verified the possibility of using single AgNWs as an optical dispersion device and waveguide probe. By controlling the experimental conditions, rough-surface AgNWs with high surface-enhanced Raman scattering (SERS) activity were also fabricated. These SERS-active probes also exhibited advantages in acquiring molecular information from a single living cell.

Gold-Etched Silver Nanowire Endoscopy: Toward a Widely Accessible Platform for Surface-Enhanced Raman Scattering-Based Analysis in Living Cells

Recently, our group introduced the use of silver nanowires (AgNWs) as novel non-invasive endoscopic probes for detecting intracellular Raman signals. This method, although innovative and promising, relies exclusively on the plasmonic waveguiding effect for signal enhancement. It, therefore, requires sophisticated operational tools and protocols, drastically limiting its applicability. Herein, an advanced strategy is offered to significantly enhance the performance of these endoscopic probes, making this approach widely accessible and versatile for cellular studies. By uniformly forming gold structures on the smooth AgNW surface via a galvanic replacement reaction, the density of the light coupling points along the whole probe surface is drastically increased, enabling high surface-enhanced Raman scattering (SERS) efficiency upon solely focusing the excitation light on the gold-etched AgNW. The applicability of these gold-etched AgNW probes for molecular sensing in cells is demonstrated by detecting site-specific and high-resolved SERS spectra of cell compartment-labeling dyes, namely, 4',6-diamidino-2-phenylindole in the nucleus and 3,3'-dioctadecyloxacarbocyanine on the membrane. The remarkable spectral sensitivity achieved provides essential structural information of the analytes, indicating the overall potential of the proposed approach for cellular studies of drug interactions with biomolecular items.

Modulating the Plasmon-Mediated Oxidation of p-Aminothiophenol with Asymmetrically Grafted Thiol Molecules

A surface plasmon can drive many photochemical reactions, in which effective charge separation and migration is a key. In analogy to the plasmon-semiconductor interface, the plasmon-molecule interface may also be used to improve the separation and migration of hot carriers. In this work, by using in situ Raman spectroscopy, molecular grafting on silver nanostructures is found essential for modulating the charge separation and p-aminothiophenol (PATP) oxidation reaction. When the LUMO of the grafted molecules match well the energy distribution of the plasmon-generated hot electrons, the PATP oxidation process accelerates significantly. Moreover, compared with symmetrical grafting, asymmetrical grafting is more effective in regulating the charge separation and plasmon-mediated chemical reaction. This work provides an effective strategy for deep understanding and fine modulation of plasmon-mediated photochemistry.

Coherent Enhancement of Dual-Path-Excited Remote SERS

Combining both localized surface plasmon polaritons (LSPPs) and propagating surface plasmon polaritons, remote surface-enhanced Raman scattering (SERS) emerges as a novel sensing technology in recent years, which could avoid the overlap of incident light and inelastic scattering light in SERS. Compared to traditional SERS, it has novel applications in sensors, plasmon-driven surface-catalyzed reactions, Raman optical activity, etc. However, the weak Raman intensity of remote SERS impedes its further application. In this work, we demonstrated that the remote SERS signals could be enhanced by more than 100% through the subwavelength interference in dual-path-excited Ag-branched nanowire dimer and nanowire-nanoparticle systems. Our experiment has revealed that remote SERS intensities could be modulated by polarization and phase differences of two incident lights illuminating at two separate nanowire terminals. The simulated electromagnetic field distributions through the finite-difference time-domain (FDTD) method indicate that subwavelength interference occurs in Ag nanowires, which causes the Raman intensities collected at a remote site is greatly influenced by the coherent superposition of propagating surface plasmon polaritons (PSPPs). Our work on this coherent enhancement could not only promote the application of remote SERS but also enlarge the research on light manipulating in the subwavelength.

Nanoplasmon-enhanced drop-screen for high throughput single-cell nucleocytoplasmic miRNA profiling

Cell nucleocytoplasmic profiles of microRNAs (miRNAs) are critical to determining a single cell's essential functionalities, such as cellular transcription, nucleus export and degradation, which gives a comprehensive view of cellular processes. Despite the importance of addressing nucleocytoplasmic heterogeneity, the challenge of high-throughput screening remains. Although a droplet-based approach was developed for single-cell miRNA assays, the challenge of quantifying miRNA with high sensitivity to indicate nucleocytoplasmic heterogeneity remains. In this study, a nanoplasmon-enhanced droplet screening platform was developed to quantify single-cell nucleocytoplasmic heterogeneity with the high sensitivity of 0.1 nM. Droplet screening and multiplexed plasmonic assays are synergistic: droplet screening is used to isolate single cells for high-throughput screening, while enhanced nanoplasmonic assays are conducted to precisely determine different types of miRNAs, addressing the cell nucleocytoplasmic profile. Here, two nucleic acid-functionalized plasmonic nanosensors, silver nanoparticles functionalized with designed sequences to target miRNAs, are synthesized. After the targets are bound, competitive formation of sensor-target hybrids interferes with plasmonic coupling between the nanoparticles, decreasing a fluorescence signal and thus enabling high-sensitivity single-cell miRNA quantification. Using the fluorescence signal change as a readout allows continuous-flow measurement to provide a single-cell nucleocytoplasmic profile in a high-throughput manner (∼100 cells per minute) for effective quantitative cell biology.

Duplicating Plasmonic Hotspots by Matched Nanoantenna Pairs for Remote Nanogap Enhanced Spectroscopy

Plasmonic nanoantennas are capable of reversibly interconverting free-space radiation with localized modes at the nanoscale. However, optical access to a single nanoantenna, through a laser beam, is always accompanied by disruptive background perturbations and heating effects. Remote spectroscopy is one promising route to overcome these effects. Here, we demonstrate excitation-collection-separated enhanced spectroscopy using a matched nanoantenna pair. The receiving and transmitting antennas are geometrically separated but bridged by the propagating surface plasmon polaritons (SPPs) on the metal film. The receiving antenna, consisting of a silver nanowire on a mirror, ensures a high light-to-plasmon conversion efficiency. The transmitting antenna consists of a silver nanocube over a mirror and is impedance matched to free space photons and the propagating SPPs. As a proof-of-principle, we demonstrate remote surface-enhanced Raman scattering with a high signal-to-noise ratio. This matched nanoantenna pair may have applications for remote entanglement of quantum emitters, biochemistry detection, or optical interconnects.

Real-Time In Situ Observations Reveal a Double Role for Ascorbic Acid in the Anisotropic Growth of Silver on Gold

Rational nanoparticle design is one of the main goals of materials science, but it can only be achieved via a thorough understanding of the growth process and of the respective roles of the molecular species involved. We demonstrate that a combination of complementary techniques can yield novel information with respect to their individual contributions. We monitored the growth of long aspect ratio silver rods from gold pentatwinned seeds by three in situ techniques (small-angle X-ray scattering, optical extinction spectroscopy and liquid-cell transmission electron microscopy). Exploiting the difference in reaction speed between the bulk synthesis and the nanoparticle formation in the TEM cell, we show that the anisotropic growth is thermodynamically controlled (rather than kinetically) and that ascorbic acid, widely used for its mild reductive properties, plays a shape-directing role, by stabilizing the {100} facets of the silver cubic lattice, in synergy with the halide ions. This approach can easily be applied to a wide variety of synthesis strategies.

Controlled Fabrication of Optical Signal Input/Output Sites on Plasmonic Nanowires

Silver nanowires have attracted considerable attention as subdiffraction limited diameter waveguides in a variety of applications including cell endoscopy and photonic integrated circuitry. Optical signal transport occurs by coupling light into propagating surface plasmons, which scatter back into light further along the wire. However, these interconversions only occur efficiently at wire ends, or at defects along the wire, which are not controlled during synthesis. Here, we overcome this limitation, demonstrating the visible laser light-induced fabrication of gold nanostructures at desired positions on silver nanowires, and their utility as efficient in/out coupling points for light. The gold nanostructures grow via plasmon-induced reduction of Au(III) and are shown to be excellent "hotspots" for surface-enhanced Raman scattering.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Injection time controls the final morphology of nanocrystals during in situ-seeding synthesis of silver nanodisks

We investigate an in situ-seeding synthesis of silver nanodisks based on the sequential addition of weak and strong reducing agents, ascorbic acid and sodium borohydride respectively, to silver nitrate at room temperature and in the presence of PVP.

In-plane aligned assemblies of 1D-nanoobjects: recent approaches and applications

One-dimensional (1D) nanoobjects have strongly anisotropic physical properties which are averaged out and cannot be exploited in disordered systems. We reviewed the in plane alignment approaches and potential applications with perspectives shared.

Simulation-guided nanofabrication of high-quality practical tungsten probes

Micro/nanoscale tungsten probes are widely utilized in the fields of surface analysis, biological engineering, etc. amongst several others. This work performs comprehensive dynamic simulations on the influences of electric field distribution, surface tension and the bubbling situation on electrochemical etching behaviors, and then the tip dimension. Results show that the etching rate is reliant on the electric field distribution determined by the cathode dimension. The necking position lies in the meniscus rather than at the bottom of the meniscus. A bubble-free condition is mandatory to stabilize the distribution of OH⁻ and WO₄²⁻ ions for a smooth tungsten probe surface. Such simulation-guidance enables the nanofabrication of probes with a high aspect ratio (10 : 1), ultra-sharp tip apex (40 nm) and ultra-smooth surface. These probes have been successfully developed for high-performance application with Scanning Tunneling Microscopy (STM). The acquired decent atomic resolution images of epitaxial bilayer graphene robustly verify the feasibility of the practical level application of these nanoscale probes. Therefore, these nanoscale probes would be of great benefit to the development of advanced analytical science and nano-to-atomic scale experimental science and technology.

Dynamic simulation is employed to reveal the mechanism of electrochemical nanofabrication of nanoscale probes for atomic resolution imaging in STM.

Excitation and analyzation of different surface plasmon modes on a suspended Ag nanowire

Silver nanowires (AgNWs), as one of the most important plasmonic waveguides, can support several different plasmonic modes. These surface plasmon polariton (SPP) modes have different electric field distributions, effective mode areas, propagation lengths and losses and thus can be used for different applications, from efficiently collecting single photons to carrying quantum entanglement. Therefore, the excitation and analysis of these different SPP modes are of pivotal importance for the development of subwavelength optical devices. In this work, we investigate different SPP modes on a suspended AgNW adhered to a fiber taper. Theoretical simulations and experimental results show that the desired SPP modes can be selectively excited by adjusting either the polarization of the excitation light or the coupling length between the fiber taper and the AgNW. Moreover, fundamental and higher-order SPP modes can be distinguished by means of a far-field method. Our results not only enable convenient and controllable excitation of the desired SPP modes but also provide unique insight into the optical properties of plasmonic waveguides.

Water-mediated polyol synthesis of pencil-like sharp silver nanowires suitable for nonlinear plasmonics

We report a simple method to control the end shape of silver nanowires by adding pure water in the conventional polyol synthesis. The use of 0.2-0.4% (v/v) water in ethylene glycol as a solvent provides pencil-like silver nanowires with sharp ends in a high yield. We have demonstrated remote excitation of SHG on the sharp nanowires, promising a point light source for super resolution microscopy.

A SERS fiber probe fabricated by layer-by-layer assembly of silver sphere nanoparticles and nanorods with a greatly enhanced sensitivity for remote sensing

Remote sensing remains a challenge due to its demand for high sensitivity, convenient sampling and rapid response time. Surface enhanced Raman scattering (SERS) spectroscopy is a powerful analytical method for the detection of various samples. Here, aiming at increasing the sensitivity, a novel strategy for the preparation of a SERS probe is demonstrated by using hollow optical fiber tips decorated by layer-by-layer assembly of two kinds of nanoparticles. Specifically, Au@Ag core-shell nanorods and Ag nanospheres with opposite surface charge were assembled layer-by-layer on the tip of hollow optical fibers through electrostatic interaction. Then, much more hotspots are generated due to the close gap between the nanorods and nanospheres in the resultant 3D structure, which can lead to a dramatically enhanced SERS activity of the probe compared with that fabricated by pure silver sphere nanoparticles or nanorods. On the other hand, taking the advantages of the vibration spectroscopic fingerprints property of SERS spectra and the long-distance communication capacity of optical fibers, the remote online detection of biological species including proteins, funguses and cells can be easily achieved within a few minutes. Therefore, such a novel kind of optical fiber-SERS sensor holds great potential for the rapid detection of a wide range of samples due to its superiority of simplicity and high sensitivity.

Silver nano-needles: focused optical field induced solution synthesis and application in remote-excitation nanofocusing SERS

Tapered metallic nanostructures that harbor surface plasmons are highly interesting for nanophotonic applications because of their waveguiding and field-focusing properties. Here, we developed a focused optical field induced solution synthesis for unique crystallized silver nano-needles. Under the focused laser spot, inhomogeneous Ag monomer concentration is created, which triggers the uniaxial growth of silver nanostructures along the radial direction with decreasing rate, forming nano-needle structures. These nano-needles are several micrometers long, with diameter attenuating from hundreds to tens of nanometers, and terminated by a sharp apex only a few nanometers in diameter. Moreover, nano-needles with atomically smooth surfaces show excellent performance for plasmonic waveguiding and unique near-field compression abilities. This nano-needle structure can be used for effective remote-excitation detection/sensing. We also demonstrate the assembling and picking up of nano-needles, which indicate potential applications in intracellular endoscopy, high resolution scanning tips, on-chip nanophotonic devices, etc.

Facilitating Tip-Enhanced Raman Scattering on Dielectric Substrates via Electrical Cutting of Silver Nanowire Probes

TERS is a powerful tool for nanoscale optical characterization of surfaces. However, even after 20 years of development, the parameters for optimal TERS tips are still up for debate. As a result, routine measurements on bulk or dielectric substrates remain exceptionally challenging. Herein we help to alleviate this by using electrical cutting to strategically modify silver nanowire TERS probes. Following cutting, the tips present a large, spherical apex and are often nanostructured with numerous nanoparticles, which we argue improve light collection and optical coupling. This doubles TERS signals on a highly enhancing, gap-mode substrate compared to our standard nanowire tips while maintaining a high reproducibility and resolution. More interestingly, on a dielectric substrate (graphene on SiO₂) the tips give ∼7× higher signals than our standard tips. Further investigations point to the nonlocal nature of the enhancement using standard, smooth TERS probes without gap-mode, making such nanostructuring highly beneficial in these cases.

Silver Nanowire-Based Fluorescence Thermometer for a Single Cell

A fluorescence thermometer based on silver nanowires (AgNWs) is realized by assembling Texas Red (TR)-marked thermal-sensitive DNA stem-loops (TR-DNA stem-loop) on the surface of AgNWs. Temperature configures the structure of the TR-DNA stem-loop and resultantly adjusts the energy transfer between TR and the AgNWs, which could sensitively control the fluorescence intensity of the thermometer. The thermometer is sensitive to the temperature ranging from 30 to 40 °C with the sensitivity of 2.6%/°C. Under the assistance of laser confocal microscopy, a temperature change within a single cell was observed by the monofilament AgNW-based thermometer.

Electricity mediated plasmonic tip engineering on single Ag nanowire for SERS

An electricity-mediated plasmonic engineering was applied on a single Ag nanowire to engineer its tip for surface-enhanced Raman scattering (SERS). Under this constant photoelectric field treatment, a significant sharpening of the tip and reduction of the surface fluctuation was observed for the Ag nanowire tip via in situ atomic force microscopy. A significant SERS signal enhancement was thus obtained after the tip engineering. The relevant dynamic mechanisms of the tip engineering, including the light-induced plasmonic phase transition and electrostatic force driven flow on the Ag nanowire tip are discussed in detail. It is expected that this type of tip engineering will greatly enhance the signal of single metal nanowire SERS probes and provide new insights into fabrication technologies for metal nanostructures.

A flexible SERS-active film for studying the effect of non-metallic nanostructures on Raman enhancement

Since the discovery of surface enhanced Raman scattering (SERS), the choice of SERS-active materials has been limited mainly to metals, especially gold and silver in the visible spectrum. Although non-metals can also be SERS-active by forming nanostructures or composite structures with SERS-active materials, the mechanism behind it is still unclear and there is no perfect technique to study it. In this work, by constructing a SERS structure on a flexible polydimethylsiloxane film, we provide a way to study the effect of non-metallic nanostructures on Raman enhancement by attaching the above film onto flat and nanostructured surfaces. It was found that a nanoporous silicon surface contributes to an additional, up to five times, Raman enhancement. The pore depth and pore size also influence the observed Raman enhancement. These findings will help us not only to understand the mechanism of SERS involving non-metallic nanostructures, but also to design more efficient SERS structures for various applications.

Remote excitation and detection of surface-enhanced Raman scattering from graphene

We demonstrate the remote excitation and detection of surface-enhanced Raman scattering (SERS) from graphene using a silver nanowire as a plasmonic waveguide. By investigating a nanowire touching a graphene sheet at only one terminal, we first show the remote excitation of SERS from graphene by propagating surface plasmon polaritons (SPPs) launched by a focused laser over distances on the order of 10 μm. Remote detection of SERS is then demonstrated for the same nanowire by detecting light emission at the distal end of the nanowire that was launched by graphene Raman scattering and carried to the end of the nanowire by SPPs. We then show that the transfer of the excitation and Raman scattered light along the nanowire can also be visualized through spectrally selective back focal plane imaging. Back focal plane images detected upon focused laser excitation at one of the nanowire's tips reveal propagating surface plasmon polaritons at the laser energy and at the energies of the most prominent Raman bands of graphene. With this approach the identification of remote excitation and detection of SERS for nanowires completely covering the Raman scatterer is achieved, which is typically not possible by direct imaging.

Silver nanowires for highly reproducible cantilever based AFM-TERS microscopy: towards a universal TERS probe

Tip-enhanced Raman scattering (TERS) microscopy is a unique analytical tool to provide complementary chemical and topographic information of surfaces with nanometric resolution. However, difficulties in reliably producing the necessary metallized scanning probe tips has limited its widespread utilisation, particularly in the case of cantilever-based atomic force microscopy. Attempts to alleviate tip related issues using colloidal or bottom-up engineered tips have so far not reported consistent probes for both Raman and topographic imaging. Here we demonstrate the reproducible fabrication of cantilever-based high-performance TERS probes for both topographic and Raman measurements, based on an approach that utilises noble metal nanowires as the active TERS probe. The tips show 10 times higher TERS contrasts than the most typically used electrochemically-etched tips, and show a reproducibility for TERS greater than 90%, far greater than found with standard methods. We show that TERS can be performed in tapping as well as contact AFM mode, with optical resolutions around or below 15 nm, and with a maximum resolution achieved in tapping-mode of 6 nm. Our work illustrates that superior TERS probes can be produced in a fast and cost-effective manner using simple wet-chemistry methods, leading to reliable and reproducible high-resolution and high-sensitivity TERS, and thus renders the technique applicable for a broad community.

Highly robust, uniform and ultra-sensitive surface-enhanced Raman scattering substrates for microRNA detection fabricated by using silver nanostructures grown in gold nanobowls

Highly sensitive and reproducible surface enhanced Raman spectroscopy (SERS) requires not only a nanometer-level structural control, but also superb uniformity across the SERS substrate for practical imaging and sensing applications. However, in the past, increased reproducibility of the SERS signal was incompatible with increased SERS sensitivity. This work presents multiple silver nanocrystals inside periodically arrayed gold nanobowls (SGBs) via an electrochemical reaction at an overpotential of -3.0 V (vs. Ag/AgCl). The gaps between the silver nanocrystals serve as hot spots for SERS enhancement, and the evenly distributed gold nanobowls lead to a high device-to-device signal uniformity. The SGBs on the large sample surface exhibit an excellent SERS enhancement factor of up to 4.80 × 10⁹, with excellent signal uniformity (RSD < 8.0 ± 2.5%). Furthermore, the SGBs can detect specific microRNA (miR-34a), which plays a widely acknowledged role as biomarkers in diagnosis and treatment of diseases. Although the small size and low abundance of miR-34a in total RNA samples hinder their detection, by utilizing the advantages of SGBs in SERS sensing, reliable and direct detection of human gastric cancer cells has been successfully accomplished.

Optimization of Ag coated hydrogen silsesquioxane square array hybrid structure design for surface-enhanced Raman scattering substrate

A computer-automated design process for a surface-enhanced Raman scattering (SERS) substrate using a particle swarm optimization algorithm is proposed. Nanostructured Ag coated hydrogen silsesquioxane nanopillar arrays of various sizes for SERS substrate applications are fabricated by direct Ag film deposition on substrates patterned by electron beam lithography and are investigated systematically. Good agreement is demonstrated between experimental and simulation results. The absorption spectra, charge distributions, and electric field distributions are calculated using finite-difference time-domain simulations to explain the field enhancement mechanism and indicate that this enhancement originates from plasmon resonance. Our work provides a guide towards optimum SERS substrate design.

Effect of nanostructured silicon on surface enhanced Raman scattering

Non-metallic materials are often employed in SERS systems by forming composite structures with SERS-active metal materials. However, the role of the non-metallic structures in these composites and the effect of them on the SERS enhancement are still unclear. Herein, we studied the effect of silicon morphology on SERS enhancement on silver nanoparticles-coated different structured silicon surfaces. Our finding will help to further understand the SERS mechanism and pave the way for making more efficient SERS systems.

The surface morphology of non-metallic silicon has a big effect on the SERS enhancement of silver nanoparticle-coated silicon surfaces.

Controlled assembly of metal colloids on dye-doped silica particles to tune the photophysical properties of organic molecules

The additive and optimised assembly of gold nanoparticles on the surface of dye-doped silica enables the modulation of the photophysical behaviour of organic molecules.

Endoscopic imaging using surface-enhanced Raman scattering

In this review, we assessed endoscopic imaging using surface-enhanced Raman scattering (SERS). As white-light endoscopy, the current standard for gastrointestinal endoscopy, is limited to morphology, Raman endoscopy using surface-enhanced Raman scattering nanoparticles (SERS endoscopy) was introduced as one of the novel functional modalities. SERS endoscopy has multiplex capability and high sensitivity with low autofluorescence and photobleaching. As a result, multiple molecular characteristics of the lesion can be accurately evaluated in real time while performing endoscopy using SERS probes and appropriate instrumentation. Especially, recently developed dual modality of fluorescence and SERS endoscopy offers easy localization with identification of multiple target molecules. For clinical use of SERS endoscopy in the future, problems of limited field of view and cytotoxicity should be addressed by fusion imaging, topical administration, and non-toxic coating of nanoparticles. We expect SERS endoscopic imaging would be an essential endoscopic technique for diagnosis of cancerous lesions, assessment of resection margins and evaluation of therapeutic responses.

Plasmon-Mediated Surface Engineering of Silver Nanowires for Surface-Enhanced Raman Scattering

We reveal nanoscale morphological changes on the surface of a silver nanowire (AgNW) in the conventional surface-enhanced Raman scattering (SERS) measurement condition. The surface morphology changes are due to the surface plasmon-mediated photochemical etching of silver in the presence of certain Raman probes, resulting in a dramatic increase of Raman scattering intensity. This observation indicates that the measured SERS enhancement does not always originate from the as-designed/fabricated structures themselves, but sometimes with contribution from the morphological changes by plasmon-mediated photochemical reactions. Our work provides a guideline for more reliable SERS measurements and demonstrates a novel method for simple and site-specific engineering of SERS substrate and AgNW probes for designing and fabricating new SERS systems, stable and efficient TERS mapping, and single-cell SERS endoscopy.

Optimization of Nanoparticle-Based SERS Substrates through Large-Scale Realistic Simulations

Surface-enhanced Raman scattering (SERS) has become a widely used spectroscopic technique for chemical identification, providing unbeaten sensitivity down to the single-molecule level. The amplification of the optical near field produced by collective electron excitations -plasmons- in nanostructured metal surfaces gives rise to a dramatic increase by many orders of magnitude in the Raman scattering intensities from neighboring molecules. This effect strongly depends on the detailed geometry and composition of the plasmon-supporting metallic structures. However, the search for optimized SERS substrates has largely relied on empirical data, due in part to the complexity of the structures, whose simulation becomes prohibitively demanding. In this work, we use state-of-the-art electromagnetic computation techniques to produce predictive simulations for a wide range of nanoparticle-based SERS substrates, including realistic configurations consisting of random arrangements of hundreds of nanoparticles with various morphologies. This allows us to derive rules of thumb for the influence of particle anisotropy and substrate coverage on the obtained SERS enhancement and optimum spectral ranges of operation. Our results provide a solid background to understand and design optimized SERS substrates.

Plasmon-enhanced sensitivity of spin-based sensors based on a diamond ensemble of nitrogen vacancy color centers

A method for enhancement of the sensitivity of a spin sensor based on an ensemble of nitrogen vacancy (NV) color centers was demonstrated. Gold nanoparticles (NPs) were deposited on the bulk diamond, which had NV centers distributed on its surface. The experimental results demonstrate that, when using this simple method, plasmon enhancement of the deposited gold NPs produces an improvement of ∼10 times in the quantum efficiency and has also improved the signal-to-noise ratio by approximately ∼2.5 times. It was also shown that more electrons participated in the spin sensing process, leading to an improvement in the sensitivity of approximately seven times; this has been proved by Rabi oscillation and optical detection of magnetic resonance (ODMR) measurements. The proposed method has proved to be a more efficient way to design an ensemble of NV centers-based sensors; because the result increases in the number of NV centers, the quantum efficiency and the contrast ratio could greatly increase the device's sensitivity.

Ultraphotostable Mesoporous Silica-Coated Gap-Enhanced Raman Tags (GERTs) for High-Speed Bioimaging

Surface-enhanced Raman scattering (SERS) tags can be utilized as optical labeling nanoprobes similar to fluorescent dyes and quantum dots for bioimaging with additional advantages of fingerprint vibrational signals as unique optical codes and ultranarrow line widths for multiplexing. However, the development of the SERS imaging technique is much less well-established compared to the devlopment of fluorescence imaging mainly because of speed limitations. An effective strategy for improving the SERS imaging speed and simultaneously maintaining the photostability of SERS tags has not, to the best of our knowledge, been reported. In this work, mesoporous silica- (MS-) coated gap-enhanced Raman tags (GERTs) were designed with built-in Raman reporters for off-resonance near-infrared laser excitation and reduced photothermal effects, leading to ultraphotostability during laser irradiation. Additionally, they achieve large amplification of Raman signals by combining the chemical (CHEM) and electromagnetic (EM) enhancement effects due to the subnanometer core-shell junction, so SERS imaging can be performed in a dramatically reduced duration. With these unique structural and optical advantages, MS GERTs exhibit high storage, pH, serum, and photostabilities; strong Raman enhancements; and favorable biocompatibility. Therefore, MS GERTs achieve long-term cell imaging that can last for 30 min without being photobleached and also maintain decent imaging effects. Furthermore, MS GERTs enable continuous and stable imaging in living tissues for more than 30 min. With these advantages, MS GERTs might potentially have more biomedical applications.

A novel method for in situ synthesis of SERS-active gold nanostars on polydimethylsiloxane film

A one-step method to form gold nanostars on a polydimethylsiloxane film is proposed for highly-sensitive SERS substrates.