Graphene/sulfur hybrid nanosheets from a space-confined "sauna" reaction for high-performance lithium-sulfur batteries

Wide-temperature-range pressure sensing by an aramid nanofibers/reduced graphene oxide flakes composite aerogel

Aerogel-based conductive materials have emerged as a major candidate for piezoresistive pressure sensors due to their excellent mechanical and electrical performance besides light-weighted and low-cost characteristics, showing great potential for applications in electronic skins, biomedicine, robot controlling and intelligent recognition. However, it remains a grand challenge for these piezoresistive sensors to achieve a high sensitivity across a wide working temperature range. Herein, we report a highly flexible and ultra-light composite aerogel consisting of aramid nanofibers (ANFs) and reduced graphene oxide flakes (rGOFs) for application as a high-performance pressure sensing material in a wide temperature range. By controlling the orientations of pores in the composite framework, the aerogel promotes pressure transfer by aligning its conductive channels. As a result, the ANFs/rGOFs aerogel-based piezoresistive sensor exhibits a high sensitivity of up to 7.10 kPa-1, an excellent stability over 12,000 cycles, and an ultra-wide working temperature range from -196 to 200 °C. It is anticipated that the ANFs/rGOFs composite aerogel can be used as reliable sensing materials in extreme environments.

Metal-N Coordination in Lithium-Sulfur Batteries: Inhibiting Catalyst Passivation

Lithium-sulfur (Li-S) batteries exhibit great potential as the next-generation energy storage techniques. Application of catalyst is widely adopted to accelerate the redox kinetics of polysulfide conversion reactions and improve battery performance. Although significant attention has been devoted to seeking new catalysts, the problem of catalyst passivation remains underexplored. Herein, we find that metal-N coordination has a previously overlooked role in preventing the catalyst passivation. In the case of nickel, the Ni catalyst reacts with S8 to produce NiSx compounds on the surface, leading to catalyst passivation and slow the kinetics of LiPSs conversion. In contrast, when Ni is coordinated with N (typically Ni-N4), S8 remains stable on the surface. The Ni-N4 exhibits excellent resistance to passivation and rapid kinetics of LiPSs conversion. Consequently, the sulfur cathode with Ni-N4 exhibits a high rate capability of 604.11 mAh g-1 at 3 C and maintains a low capacity decay rate of 0.046 % per cycle over 1000 cycles at 2 C. Furthermore, preventing S passivation in M-N coordination applies not only to Ni-N4 but also to various coordination numbers and transition metals. This study reveals a new aspect of metal-N coordination in inhibiting catalyst passivation, improving our understanding of catalysts in Li-S batteries.

A simple route to functionalized porous carbon foams from carbon nanodots for metal-free pseudocapacitors

The development of potent pseudocapacitive charge storage materials has emerged as an effective solution for closing the gap between high-energy density batteries and high-power density and long-lasting electrical double-layer capacitors. Sulfonyl compounds are ideal candidates owing to their rapid and reversible redox reactions. However, structural instability and low electrical conductivity hinder their practical application as electrode materials. This work addresses these challenges using a fast and clean laser process to interconnect sulfonated carbon nanodots into functionalized porous carbon frameworks. In this bottom-up approach, the resulting laser-converted three-dimensional (3D) turbostratic carbon foams serve as high-surface-area, conductive scaffolds for redox-active sulfonyl groups. This design enables efficient faradaic processes using pendant sulfonyl groups, leading to a high specific capacitance of 157.6 F g-1 due to the fast reversible redox reactions of sulfonyl moieties. Even at 20 A g-1, the capacitance remained at 78.4% due to the uniform distribution of redox-active sites on the graphitic domains. Additionally, the 3D-tsSC300 electrode showed remarkable cycling stability of >15 000 cycles. The dominant capacitive processes and kinetics were analysed using extensive electrochemical characterizations. Furthermore, we successfully used 3D-tsSC300 in flexible solid-state supercapacitors, achieving a high specific capacitance of up to 17.4 mF cm-2 and retaining 91.6% of the initial capacitance after 20 000 cycles of charge and discharge coupled with 90° bending tests. Additionally, an as-assembled flexible all-solid-state symmetric supercapacitor exhibits a high energy density of 12.6 mW h cm-3 at a high power density of 766.2 W cm-3, both normalized by the volumes of the full device, which is comparable or better than state-of-the-art commercial pseudocapacitors and hybrid capacitors. The integrated supercapacitor provides a wide potential window of 2.0 V using a serial circuit, showing great promise for metal-free energy storage devices.

A triple-synergistic small-molecule sulfur cathode promises energetic Cu-S electrochemistry

Metal-sulfur batteries have received great attention for electrochemical energy storage due to high theoretical capacity and low cost, but their further development is impeded by low sulfur utilization, poor electrochemical kinetics, and serious shuttle effect of the sulfur cathode. To avoid these problems, herein, a triple-synergistic small-molecule sulfur cathode is designed by employing N, S co-doped hierarchical porous bamboo charcoal as a sulfur host in an aqueous Cu-S battery. Expect the enhanced conductivity and chemisorption induced by N, S synergistic co-doping, the intrinsic synergy of macro-/meso-/microporous triple structure also ensures space-confined small-molecule sulfur as high utilization reactant and effectively alleviates the volume expansion during conversion reaction. Under a further joint synergy between hierarchical structure and heteroatom doping, the resulting sulfur cathode endows the Cu-S battery with outstanding electrochemical performance. Cycled at 5 A g-1, it can deliver a high reversible capacity of 2,509.8 mAh g-1 with a good capacity retention of 97.9% after 800 cycles. In addition, a flexible hybrid pouch cell built by a small-molecule sulfur cathode, Zn anode, and gel electrolytes can firmly deliver high average operating voltage of about 1.3 V with a reversible capacity of over 2,500 mAh g-1 under various destructive conditions, suggesting that the triple-synergistic small-molecule sulfur cathode promises energetic metal-sulfur batteries.

Coordinated Immobilization and Rapid Conversion of Polysulfide Enabled by a Hollow Metal Oxide/Sulfide/Nitrogen-Doped Carbon Heterostructure for Long-Cycle-Life Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) are recognized as the prospective candidate in next-generation energy storage devices due to their gratifying theoretical energy density. Nonetheless, they still face the challenges of the practical application including low utilization of sulfur and poor cycling life derived from shuttle effect of lithium polysulfides (LiPSs). Herein, a hollow polyhedron with heterogeneous CoO/Co9 S8 /nitrogen-doped carbon (CoO/Co9 S8 /NC) is obtained through employing zeolitic imidazolate framework as precursor. The heterogeneous CoO/Co9 S8 /NC balances the redox kinetics of Co9 S8 with chemical adsorption of CoO toward LiPSs, effectively inhibiting the shuttle of LiPSs. The mechanisms are verified by both experiment and density functional theory calculation. Meanwhile, the hollow structure acts as a sulfur storage chamber, which mitigates the volumetric expansion of sulfur and maximizes the utilization of sulfur. Benefiting from the above advantages, lithium-sulfur battery with S-CoO/Co9 S8 /NC achieves a high initial discharge capacity (1470 mAh g-1 ) at 0.1 C and long cycle life (ultralow capacity attenuation of 0.033% per cycle after 1000 cycles at 1 C). Even under high sulfur loading of 3.0 mg cm-2 , lithium-sulfur battery still shows the satisfactory electrochemical performance. This work may provide an idea to elevate the electrochemical performance of LSBs by constructing a hollow metal oxide/sulfide/nitrogen-doped carbon heterogeneous structure.

Scalable Production of Freestanding Few-Layer β12-Borophene Single Crystalline Sheets as Efficient Electrocatalysts for Lithium-Sulfur Batteries

Two-dimensional (2D) borophene has attracted tremendous interest due to its fascinating properties, which have potential applications in catalysts, energy storage devices, and high-speed transistors. In the past few years, borophene was theoretically predicted as an ideal electrode material for lithium-sulfur (Li-S) batteries because of its low-density, metallic conductivity, high Li-ion surface mobility, and strong interface bonding energy to polysulfide. But until now, borophene-based Li-S batteries have not yet been achieved in experiments due to the absence of a large-scale synthetic method of freestanding borophene nanostructures with a high enough structural stability, conductivity, and uniformity. Herein, we developed a low-temperature liquid exfoliation (LTLE) method to synthesize freestanding few-layer β₁₂-borophene single-crystalline sheets with a P6¯m2 symmetry in tens of milligrams. The as-synthesized 2D sheets were used as the polysulfide immobilizers and electrocatalysts of Li-S batteries. The resulting borophene-based Li-S battery delivered an extralarge areal capacity of 5.2 mAh cm^-2 at a high sulfur loading of 7.8 mg cm^-2, an excellent rate performance of 8 C (@721 mAh g^-1), and an ultralow capacity fading rate of 0.039% in 1000 cycles, outperforming commercial Li-ion batteries and many other 2D material-based Li-S batteries. Based on the density functional theory model, the excellent electrochemical performances of the borophene-based Li-S batteries should originate from the enormous enhancement of β₁₂-borophene sheets for both the surface migration of the Li-ions and the adsorption energy of Li₂S_n clusters. Our results thus demonstrate a great potential for scalable production of freestanding β₁₂-borophene single-crystalline sheets in future high-performance Li-S batteries.

Strongly trapping soluble lithium polysulfides using polar cysteamine groups for highly stable lithium sulfur batteries

Sulfur has become one of the most promising positive electrode materials for lithium sulfur batteries due to its high theoretical capacity and high energy density (2500 Wh kg^-1). The use of common nonpolar carbon/sulfur composites has proved to be a good way to improve the performance, but they still cannot efficiently trap highly polar lithium polysulfides due to the weak interactions between nonpolar carbon and polar polysulfides. Herein, we report a new strategy of using polar cysteamine groups to trap polar polysulfides, leading to greatly enhanced capacity of ∼920 mAh g^-1 at 1 C with a high Coulombic efficiency of ∼99.1%, and a long cycle life of over 600 cycles with a capacity retention higher than 80%. Importantly, in situ UV/Vis spectroscopy was employed to identify intermediates during cycling, which demonstrates the constructed unique polar cysteamine functionalized carbon nanotubes (CNTs) can greatly reduce the production of polysulfides and suppress the shuttle effect. The broken-bond model of linear polysulfane during cycling was further demonstrated by density functional theory calculations. The present strategy of using polar cysteamine-functionalized CNTs to trap soluble intermediates is promising and has significant potential for the development of highly efficient lithium sulfur batteries.

Ultrafine nanosulfur particles sandwiched in little oxygen-functionalized graphene layers as cathodes for high rate and long-life lithium-sulfur batteries

Although lithium-sulfur batteries are one of the promising candidates for next-generation energy storage systems, the practical applications are still hampered by the poor cycle life, which can be attributed to the insulating properties of sulfur and the shuttle effect of electrochemical intermediate polysulfides. To address these problems, we synthesize sandwich-like composites which consist of ultrafine nanosulfur particles enveloped by little oxygen-functionalized graphene layers (F-GS@S). In this structure, the little oxygen-functionalized graphene backbone can not only accelerate the redox kinetics of sulfur species, but also eliminate the shuttle effect of polysulfides by strong chemical interaction. Moreover, the sandwich confinement structures can further inhibit the dissolution of polysulfides by physical restraint and accommodate the volume contraction/expansion of sulfur during cycling. As a result, the F-GS@S composites used as cathodes for lithium-sulfur batteries display a superior rate capability with the high capacities of 1208 mAh g^-1 at 0.1 C and 601.7 mAh g^-1 at 2 C and high cycling stability with a capacity retention of 70.5% after 500 cycles at 2 C. In situ characterizations and real-time monitoring experiments during the charge-discharge process are carried out to elucidate the reaction mechanism of the F-GS@S composites as cathodes for high rate and long-life lithium-sulfur batteries.

Two-Dimensional Transition Metal Chalcogenides for Alkali Metal Ions Storage

On the heels of exacerbating environmental concerns and ever-growing global energy demand, development of high-performance renewable energy-storage and -conversion devices has aroused great interest. The electrode materials, which are the critical components in electrochemical energy storage (EES) devices, largely determine the energy-storage properties, and the development of suitable active electrode materials is crucial to achieve efficient and environmentally friendly EES technologies albeit the challenges. Two-dimensional transition-metal chalcogenides (2D TMDs) are promising electrode materials in alkali metal ion batteries and supercapacitors because of ample interlayer space, large specific surface areas, fast ion-transfer kinetics, and large theoretical capacities achieved through intercalation and conversion reactions. However, they generally suffer from low electronic conductivities as well as substantial volume change and irreversible side reactions during the charge/discharge process, which result in poor cycling stability, poor rate performance, and low round-trip efficiency. In this Review, recent advances of 2D TMDs-based electrode materials for alkali metal-ion energy-storage devices with the focus on lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), potassium-ion batteries (PIBs), high-energy lithium-sulfur (Li-S), and lithium-air (Li-O₂ ) batteries are described. The challenges and future directions of 2D TMDs-based electrode materials for high-performance LIBs, SIBs, PIBs, Li-S, and Li-O₂ batteries as well as emerging alkali metal-ion capacitors are also discussed.

Structural phase transformation from SnS2/reduced graphene oxide to SnS/sulfur-doped graphene and its lithium storage properties

In this work, we demonstrate an interesting structural phase transition from SnS2/reduced graphene oxide to SnS/sulfur-doped graphene at a moderate calcination temperature of 500 °C under an inert atmosphere. It is discovered that SnS2 chemically bound to rGO with a weakened C-S bond is easier to break and decompose into SnS, whereas it is difficult for pure-phase crystalline SnS2 to experience phase transformation at this temperature. Moreover, the thin-layered structure of SnS2 and rGO is an important factor for the effective doping of the dissociated Sx into graphene. Density functional theory calculations also reveal the feasibility of the structural phase transition process. Morphology characterization shows that partial SnS maintains the original nanosheet structure (∼100 nm) and the others are decomposed into tiny nanoparticles (10-20 nm). A high S-doping amount reduces the irreversible lithium storage sites on graphene, and the first coulombic efficiency is as high as 81.7%. In addition, thin-layered and small-sized SnS can alleviate the structural damage caused by volume expansion and shrinkage; therefore, a high specific capacity of 893.9 mA h g-1 is retained after 100 cycles.

Classification of Spatially Confined Reactions and the Electrochemical Applications of Molybdenum-Based Nanocomposites

As a popular material synthesis method, spatially confined reactions have been gradually recognised for their excellent performance in the field of current materials synthesis. In recent years, molybdenum-based catalysts have gradually gained recognition due to high natural reserves of Mo, its low cost, and many other advantages, and they have wide applications in the area of functional materials, especially in topical areas such as batteries and electrocatalysts. In this context, spatially confined reactions have become widely to obtain various types of molybdenum-based electrode materials and electrocatalysts which result in an excellent morphology, structure, and performance. In this review, the concept of a spatially confined reaction system and the electrochemical application (electrode materials and electrocatalyst) of molybdenum-based materials synthesised in this way are comprehensively discussed. The current problems and future development and application of molybdenum-based materials are also discussed in this review.

Current Status and Future Prospects of Metal-Sulfur Batteries

Lithium-sulfur batteries are a major focus of academic and industrial energy-storage research due to their high theoretical energy density and the use of low-cost materials. The high energy density results from the conversion mechanism that lithium-sulfur cells utilize. The sulfur cathode, being naturally abundant and environmentally friendly, makes lithium-sulfur batteries a potential next-generation energy-storage technology. The current state of the research indicates that lithium-sulfur cells are now at the point of transitioning from laboratory-scale devices to a more practical energy-storage application. Based on similar electrochemical conversion reactions, the low-cost sulfur cathode can be coupled with a wide range of metallic anodes, such as sodium, potassium, magnesium, calcium, and aluminum. These new "metal-sulfur" systems exhibit great potential in either lowering the production cost or producing high energy density. Inspired by the rapid development of lithium-sulfur batteries and the prospect of metal-sulfur cells, here, over 450 research articles are summarized to analyze the research progress and explore the electrochemical characteristics, cell-assembly parameters, cell-testing conditions, and materials design. In addition to highlighting the current research progress, the possible future areas of research which are needed to bring conversion-type lithium-sulfur and other metal-sulfur batteries into the market are also discussed.

Fabrication of Porous Nanonetwork-Structured Carbons from Well-Defined Cylindrical Molecular Bottlebrushes

Atom transfer radical polymerization was utilized to prepare well-defined cylindrical molecular bottlebrushes which were employed as building blocks and transformed into porous nanonetwork-structured carbons (PNSCs) via hypercross-linking chemistry and shape-regulated carbonization. The as-prepared PNSCs exhibited a unique nanomorphology-tunable characteristic by simply varying carbonization conditions. Because of their three-dimensional network nanomorphologies with well-developed hierarchical porous structures and conductive carbon framework, the PNSCs demonstrated excellent electrochemical performance in lithium-sulfur batteries.

The Regulating Role of Carbon Nanotubes and Graphene in Lithium-Ion and Lithium-Sulfur Batteries

The ever-increasing demands for batteries with high energy densities to power the portable electronics with increased power consumption and to advance vehicle electrification and grid energy storage have propelled lithium battery technology to a position of tremendous importance. Carbon nanotubes (CNTs) and graphene, known with many appealing properties, are investigated intensely for improving the performance of lithium-ion (Li-ion) and lithium-sulfur (Li-S) batteries. However, a general and objective understanding of their actual role in Li-ion and Li-S batteries is lacking. It is recognized that CNTs and graphene are not appropriate active lithium storage materials, but are more like a regulator: they do not electrochemically react with lithium ions and electrons, but serve to regulate the lithium storage behavior of a specific electroactive material and increase the range of applications of a lithium battery. First, metrics for the evaluation of lithium batteries are discussed, based on which the regulating role of CNTs and graphene in Li-ion and Li-S batteries is comprehensively considered from fundamental electrochemical reactions to electrode structure and integral cell design. Finally, perspectives on how CNTs and graphene can further contribute to the development of lithium batteries are presented.

Simultaneous Suppression of the Dendrite Formation and Shuttle Effect in a Lithium-Sulfur Battery by Bilateral Solid Electrolyte Interface

Although the reversible and inexpensive energy storage characteristics of the lithium-sulfur (Li-S) battery have made it a promising candidate for electrical energy storage, the dendrite growth (anode) and shuttle effect (cathode) hinder its practical application. Here, it is shown that new electrolytes for Li-S batteries promote the simultaneous formation of bilateral solid electrolyte interfaces on the sulfur-host cathode and lithium anode, thus effectively suppressing the shuttle effect and dendrite growth. These high-capacity Li-S batteries with new electrolytes exhibit a long-term cycling stability, ultrafast-charge/slow-discharge rates, super-low self-discharge performance, and a capacity retention of 94.9% even after a 130 d long storage. Importantly, the long cycle stability of these industrial grade high-capacity Li-S pouch cells with new electrolytes will provide the basis for creating robust energy dense Li-S batteries with an extensive life cycle.

Advances in Cathode Materials for High-Performance Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) represent a promising energy storage technology, and they show potential for next-generation high-energy systems due to their high specific capacity, abundant constitutive resources, non-toxicity, low cost, and environment friendliness. Unlike their ubiquitous lithium-ion battery counterparts, the application of LSBs is challenged by several obstacles, including short cycling life, limited sulfur loading, and severe shuttling effect of polysulfides. To make LSBs a viable technology, it is very important to design and synthesize outstanding cathode materials with novel structures and properties. In this review, we summarize recent progress in designs, preparations, structures, and properties of cathode materials for LSBs, emphasizing binary, ternary, and quaternary sulfur-based composite materials. We especially highlight the utilization of carbons to construct sulfur-based composite materials in this exciting field. An extensive discussion of the emerging challenges and possible future research directions for cathode materials for LSBs is provided.

Self-assembled sulfur/reduced graphene oxide nanoribbon paper as a free-standing electrode for high performance lithium-sulfur batteries

Flexible, interconnected sulfur/reduced graphene oxide nanoribbon paper (S/RGONRP) is synthesized through S^2- reduction and evaporation induced self-assembly processes. The in situ formed sulfur atoms chemically bonded with the surface of reduced graphene oxide nanoribbons and were physically trapped by the compact assembly, which make the hybrid a suitable cathode material for lithium-sulfur batteries.

Interaction between functionalized graphene and sulfur compounds in a lithium–sulfur battery – a density functional theory investigation

Functionalized graphene can successfully anchor sulfur compoundsviamoderate interactions, leading to improved conductivity and charge transfer in the cathode of Li–S batteries.

Three-dimensional macroporous graphene monoliths with entrapped MoS2nanoflakes from single-step synthesis for high-performance sodium-ion batteries

Layered metal sulfides (MoS₂, WS₂, SnS₂, and SnS) offer high potential as advanced anode materials in sodium ion batteries upon integration with highly-conductive graphene materials. However, in addition to being costly and time-consuming, existing strategies for synthesizing sulfides/graphene composites often involve complicated procedures. It is therefore essential to develop a simple yet scalable pathway to construct sulfide/graphene composites for practical applications. Here, we highlight a one-step, template-free, high-throughput “self-bubbling” method for producing MoS₂/graphene composites, which is suitable for large-scale production of sulfide/graphene composites. The final product featured MoS₂ nanoflakes distributed in three-dimensional macroporous monolithic graphene. Moreover, this unique MoS₂/graphene composite achieved remarkable electrochemical performance when being applied to Na-ion battery anodes; namely, excellent cycling stability (474 mA h g⁻¹ at 0.1 A g⁻¹ after 100 cycles) and high rate capability (406 mA h g⁻¹ at 0.25 A g⁻¹ and 359 mA h g⁻¹ at 0.5 A g⁻¹). This self-bubbling approach should be applicable to delivering other graphene-based composites for emerging applications such as energy storage, catalysis, and sensing.

A single-step, template-free, high-throughput synthesis method is developed to produce graphene/MoS₂ composites for improved performances in sodium-ion batteries.

Nanostructured Metal Oxides and Sulfides for Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries with high energy density and long cycle life are considered to be one of the most promising next-generation energy-storage systems beyond routine lithium-ion batteries. Various approaches have been proposed to break down technical barriers in Li-S battery systems. The use of nanostructured metal oxides and sulfides for high sulfur utilization and long life span of Li-S batteries is reviewed here. The relationships between the intrinsic properties of metal oxide/sulfide hosts and electrochemical performances of Li-S batteries are discussed. Nanostructured metal oxides/sulfides hosts used in solid sulfur cathodes, separators/interlayers, lithium-metal-anode protection, and lithium polysulfides batteries are discussed respectively. Prospects for the future developments of Li-S batteries with nanostructured metal oxides/sulfides are also discussed.

Chemical grafting of Co9S8 onto C60 for hydrogen spillover and storage

Metal modified C₆₀ is considered to be a potential hydrogen storage medium due to its high theoretical capacity. Research interest is growing in various hybrid inorganic compounds-C₆₀. While the design and synthesis of a novel hybrid inorganic compound-C₆₀ is difficult to attain, it has been theorized that the atomic hydrogen could transfer from the inorganic compound to the adjacent C₆₀ surfaces via spillover and surface diffusion. Here, as a proof of concept experiment, we graft Co₉S₈ onto C₆₀via a facile high energy ball milling process. The Raman, XPS, XRD, TEM, HTEM and EELS measurements have been conducted to evaluate the composition and structure of the pizza-like hybrid material. In addition, the electrochemical measurements and calculated results demonstrate that the chemical "bridges" (C-S bonds) between these two materials enhance the binding strength and, hence, facilitate the hydriding reaction of C₆₀ during the hydrogen storage process. As a result, an increased hydrogen storage capacity of 4.03 wt% is achieved, along with a favorable cycling stability of ∼80% after 50 cycles. Excluding the direct hydrogen storage contribution from Co₉S₈ in the hybrid paper, the hydrogen storage ability of C₆₀ was enhanced by 5.9× through the hydriding reaction caused by the Co₉S₈ modifier. Based on these experimental measurements and theoretical calculations, the unique chemical structure reported here could potentially inspire other C₆₀-based advanced hybrids.

Freestanding reduced graphene oxide-sulfur composite films for highly stable lithium-sulfur batteries

Freestanding reduced graphene oxide-sulfur (rGO-S) composite films were fabricated by combining solution infiltration of sulfur into solvated rGO films with freeze-drying. Such rGO-S composite films can directly serve as the cathodes of lithium-sulfur (Li-S) batteries. The nanostructured architecture of rGO-S composite films considerably improved the cycling stability of Li-S batteries.

Optimization of Microporous Carbon Structures for Lithium-Sulfur Battery Applications in Carbonate-Based Electrolyte

Developing appropriate sulfur cathode materials in carbonate-based electrolyte is an important research subject for lithium-sulfur batteries. Although several microporous carbon materials as host for sulfur reveal the effect, methods for producing microporous carbon are neither easy nor well controllable. Moreover, due to the complexity and limitation of microporous carbon in their fabrication process, there has been rare investigation of influence on electrochemical behavior in the carbonate-based electrolyte for lithium-sulfur batteries by tuning different micropore size(0-2 nm) of carbon host. Here, we demonstrate an immediate carbonization process, self-activation strategy, which can produce microporous carbon for a sulfur host from alkali-complexes. Besides, by changing different alkali-ion in the previous complex, the obtained microporous carbon exhibits a major portion of ultramicropore (<0.7 nm, from 54.9% to 25.8%) and it is demonstrated that the micropore structure of the host material plays a vital role in confining sulfur molecule. When evaluated as cathode materials in a carbonate-based electrolyte for Li-S batteries, such microporous carbon/sulfur composite can provide high reversible capacity, cycling stability and good rate capability.

Ferroelectric-Enhanced Polysulfide Trapping for Lithium-Sulfur Battery Improvement

A brand new polysulfide entrapping strategy based on the ferroelectric effect has been demonstrated for the first time. By simply adding the nano-ferroelectrics (BaTiO₃ nanoparticles) into the cathode, the heteropolar polysulfides can be anchored within the cathode due to the internal electric field originated from the spontaneous polarization BaTiO₃ nanoparticles, and thus significantly improving the cycle stability of Li-S batteries.

Advances in electrode materials for Li-based rechargeable batteries

We summarize strategies to enhance the performance of electrode materials for Li-based batteries through nanoengineering and surface coating, and introduce new trends in developing alternative materials, battery concepts and cell configurations.

Facile synthesis of mesoporous graphene platelets with in situ nitrogen and sulfur doping for lithium–sulfur batteries

The interaction between lithium polysulfides and doped heteroatoms could prevent the loss of soluble polysulfides in the cathode and mitigate the shuttle effect in lithium–sulfur batteries.

Atomic-Scale Mechanism on Nucleation and Growth of Mo2C Nanoparticles Revealed by in Situ Transmission Electron Microscopy

With a similar electronic structure as that of platinum, molybdenum carbide (Mo₂C) holds significant potential as a high performance catalyst across many chemical reactions. Empirically, the precise control of particle size, shape, and surface nature during synthesis largely determines the catalytic performance of nanoparticles, giving rise to the need of clarifying the underlying growth characteristics in the nucleation and growth of Mo₂C. However, the high-temperature annealing involved during the growth of carbides makes it difficult to directly observe and understand the nucleation and growth processes. Here, we report on the use of advanced in situ transmission electron microscopy with atomic resolution to reveal a three-stage mechanism during the growth of Mo₂C nanoparticles over a wide temperature range: initial nucleation via a mechanism consistent with spinodal decomposition, subsequent particle coalescence and monomer attachment, and final surface faceting to well-defined particles with minimum surface energy. These microscopic observations made under a heating atmosphere offer new perspectives toward the design of carbide-based catalysts, as well as the tuning of their catalytic performances.

Novel Li[(CF3SO2)(n-C4F9SO2)N]-Based Polymer Electrolytes for Solid-State Lithium Batteries with Superior Electrochemical Performance

Solid polymer electrolytes (SPEs) would be promising candidates for application in high-energy rechargeable lithium (Li) batteries to replace the conventional organic liquid electrolytes, in terms of the enhanced safety and excellent design flexibility. Herein, we first report novel perfluorinated sulfonimide salt-based SPEs, composed of lithium (trifluoromethanesulfonyl)(n-nonafluorobutanesulfonyl)imide (Li[(CF₃SO₂)(n-C₄F₉SO₂)N], LiTNFSI) and poly(ethylene oxide) (PEO), which exhibit relatively efficient ionic conductivity (e.g., 1.04 × 10^-4 S cm^-1 at 60 °C and 3.69 × 10^-4 S cm^-1 at 90 °C) and enough thermal stability (>350 °C), for rechargeable Li batteries. More importantly, the LiTNFSI-based SPEs could not only deliver the excellent interfacial compatibility with electrodes (e.g., Li-metal anode, LiFePO₄ and sulfur composite cathodes), but also afford good cycling performances for the Li|LiFePO₄ (>300 cycles at 1C) and Li-S cells (>500 cycles at 0.5C), in comparison with the conventional LiTFSI (Li[(CF₃SO₂)₂N])-based SPEs. The interfacial impedance and morphology of the cycled Li-metal electrodes are also comparatively analyzed by electrochemical impedance spectra and scanning electron microscopy, respectively. These indicate that the LiTNFSI-based SPEs would be potential alternatives for application in high-energy solid-state Li batteries.

A Flexible Nanostructured Paper of a Reduced Graphene Oxide-Sulfur Composite for High-Performance Lithium-Sulfur Batteries with Unconventional Configurations

Flexible nanostructured reduced graphene oxide-sulfur (rGO-S) composite films are fabricated by synchronously reducing and assembling GO sheets with S nanoparticles on a metal surface. The nanostructured architecture in such composite films not only provides effective pathways for electron transport, but also suppresses the diffusion of polysulfides. Furthermore, they can serve as the cathodes of flexible Li-S batteries.

Three dimensional Graphene aerogels as binder-less, freestanding, elastic and high-performance electrodes for lithium-ion batteries

In this work it is shown how porous graphene aerogels fabricated by an eco-friendly and simple technological process, could be used as electrodes in lithium- ion batteries. The proposed graphene framework exhibited excellent performance including high reversible capacities, superior cycling stability and rate capability. A significantly lower temperature (75 °C) than the one currently utilized in battery manufacturing was utilized for self-assembly hence providing potential significant savings to the industrial production. After annealing at 600 °C, the formation of Sn-C-O bonds between the SnO₂ nanoparticles and the reduced graphene sheets will initiate synergistic effect and improve the electrochemical performance. The XPS patterns revealed the formation of Sn-C-O bonds. Both SEM and TEM imaging of the electrode material showed that the three dimensional network of graphene aerogels and the SnO₂ particles were distributed homogeneously on graphene sheets. Finally, the electrochemical properties of the samples as active anode materials for lithium-ion batteries were tested and examined by constant current charge–discharge cycling and the finding fully described in this manuscript.

Design Principles for Heteroatom-Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries have been intensively concerned to fulfill the urgent demands of high capacity energy storage. One of the major unsolved issues is the complex diffusion of lithium polysulfide intermediates, which in combination with the subsequent paradox reactions is known as the shuttle effect. Nanocarbon with homogeneous nonpolar surface served as scaffolding materials in sulfur cathode basically cannot afford a sufficient binding and confining effect to maintain lithium polysulfides within the cathode. Herein, a systematical density functional theory calculation of various heteroatoms-doped nanocarbon materials is conducted to elaborate the mechanism and guide the future screening and rational design of Li-S cathode for better performance. It is proved that the chemical modification using N or O dopant significantly enhances the interaction between the carbon hosts and the polysulfide guests via dipole-dipole electrostatic interaction and thereby effectively prevents shuttle of polysulfides, allowing high capacity and high coulombic efficiency. By contrast, the introduction of B, F, S, P, and Cl monodopants into carbon matrix is unsatisfactory. To achieve the strong-couple effect toward Li2 Sx , the principles for rational design of doped carbon scaffolds in Li-S batteries to achieve a strong electrostatic dipole-dipole interaction are proposed. An implicit volcano plot is obtained to describe the dependence of binding energies on electronegativity of dopants. Moreover, the codoping strategy is predicted to achieve even stronger interfacial interaction to trap lithium polysulfides.

Calixarene-functionalized graphene oxide composites fixed on glassy carbon electrodes for electrochemical detection

Four composite materials were prepared by grafting calixarene derivatives onto the surfaces of graphene oxide (GO) via covalent functionalization to yield covalently functionalized graphene oxides (CFGOs).