Self-Assembled Organic Single Crystalline Nanosheet for Solution Processed High-Performance n-Channel Field-Effect Transistors

An In-Situ Cyanidation Strategy To Access Tetracyanodiacenaphthoanthracene Diimides with High Electron Mobilities Exceeding 10 cm2 V-1 s-1

A family of novel highly π-extended tetracyano-substituted acene diimides, named as tetracyanodiacenaphthoanthracene diimides (TCDADIs), have been synthesized using a facile four-fold Knoevenagel condensation strategy. Unlike conventional cyano substitution reactions, our approach enables access to a large π-conjugated backbone with the in-situ formation of four cyano substitutents at room temperature while avoiding extra cyano-functionalization reactions. TCDADIs decorated with different N-alkyl substituents present good solubility, near-coplanar backbones, good crystallinity, and low-lying lowest unoccupied molecular orbital energies of -4.33 eV, all of which contribute to desirable electron-transport performance when applied in organic field-effect transistors (OFET). The highest electron mobility of an OFET based on a 2-hexyldecyl-substituted TCDADI single crystal reaches 12.6 cm2  V-1  s-1 , which is not only among the highest values for the reported n-type organic semiconductor materials (OSMs) but also exceeds that of most n-type OSMs decorated with imide units.

Recent advances in n-type and ambipolar organic semiconductors and their multi-functional applications

Organic semiconductors have received broad attention and research interest due to their unique integration of semiconducting properties with structural tunability, intrinsic flexibiltiy and low cost. In order to meet the requirements of organic electronic devices and their integrated circuits, p-type, n-type and ambipolar organic semiconductors are all necessary. However, due to the limitation in both material synthesis and device fabrication, the development of n-type and ambipolar materials is quite behind that of p-type materials. Recent development in synthetic methods of organic semiconductors greatly enriches the range of n-type and ambipolar materials. Moreover, the newly developed materials with multiple functions also put forward multi-functional device applications, including some emerging research areas. In this review, we give a timely summary on these impressive advances in n-type and ambipolar organic semiconductors with a special focus on their synthesis methods and advanced materials with enhanced properties of charge carrier mobility, integration of high mobility and strong emission and thermoelectric properties. Finally, multi-functional device applications are further demonstrated as an example of these developed n-type and ambipolar materials.

Organoplatinum(II) Cruciform: A Versatile Building Block to Fabricate 2D Microcrystals with Full-Color and White Phosphorescence and Anisotropic Photon Transport

Conventional square-planar platinum complexes typically form one-dimensional assemblies as a result of unidirectional metallophilic and/or π⋅⋅⋅π intermolecular interactions. Organoplatinum(II) complexes with a cruciform shape are presented herein to construct two-dimensional (2D) microcrystals with full-color and white phosphorescence. These 2D crystals show unique monocomponent π⋅⋅⋅π stacking, from either the cyclometalating or noncyclometalating ligand, and the bicomponent alternate π⋅⋅⋅π stacking from both ligands along different facet directions. Anisotropic tri-directional waveguiding is further implemented on a single hexagonal microcrystal. These results demonstrate the great capability of the organoplatinum(II) cruciform as a general platform to fabricate 2D phosphorescent micro-/nanocrystals for advanced photonic applications.

Atomically Thin Materials for Next-Generation Rechargeable Batteries

Atomically thin materials (ATMs) with thicknesses in the atomic scale (typically <5 nm) offer inherent advantages of large specific surface areas, proper crystal lattice distortion, abundant surface dangling bonds, and strong in-plane chemical bonds, making them ideal 2D platforms to construct high-performance electrode materials for rechargeable metal-ion batteries, metal-sulfur batteries, and metal-air batteries. This work reviews the synthesis and electronic property tuning of state-of-the-art ATMs, including graphene and graphene derivatives (GE/GO/rGO), graphitic carbon nitride (g-C₃N₄), phosphorene, covalent organic frameworks (COFs), layered transition metal dichalcogenides (TMDs), transition metal carbides, carbonitrides, and nitrides (MXenes), transition metal oxides (TMOs), and metal-organic frameworks (MOFs) for constructing next-generation high-energy-density and high-power-density rechargeable batteries to meet the needs of the rapid developments in portable electronics, electric vehicles, and smart electricity grids. We also present our viewpoints on future challenges and opportunities of constructing efficient ATMs for next-generation rechargeable batteries.

Effect of the Fluoro-Substituent Position on the Crystal Structure and Photoluminescence of Microcrystals of Platinum β-Diketonate Complexes

Molecular packing has an important effect on the photophysical properties of crystalline materials. We demonstrate in this work the modulation of molecular packing and emission properties of microcrystals by minor molecular structural variations. Four platinum β-diketonate complexes, with two fluoro substituents (1) or one fluoro atom substituted on different positions of the auxiliary phenylpyridine ligand (2-4) have been synthesized. These complexes were used to prepare one-dimensional microcrystals with well-defined shapes and uniform sizes. Although 1-4 display similar emission spectra in the solution state, the corresponding microcrystals display different emission colors from green to yellow and orange. In addition, different temperature-responsive (80-298 K) emission spectral changes have been observed from these microcrystals, including the intensity variation of the locally excited (LE) emission without obvious wavelength shifts, competition between the LE and metal-metal-to-ligand charge-transfer emissions, and the sole wavelength shift of the π-π excimer emissions. These differences in emission properties are rationalized by different molecular packings of these materials, as revealed by single-crystal X-ray analyses.

The Emergence of Organic Single-Crystal Electronics

Organic semiconducting single crystals are perfect for both fundamental and application-oriented research due to the advantages of free grain boundaries, few defects, and minimal traps and impurities, as well as their low-temperature processability, high flexibility, and low cost. Carrier mobilities of greater than 10 cm²  V^-1  s^-1 in some organic single crystals indicate a promising application in electronic devices. The progress made, including the molecular structures and fabrication technologies of organic single crystals, is introduced and organic single-crystal electronic devices, including field-effect transistors, phototransistors, p-n heterojunctions, and circuits, are summarized. Organic two-dimensional single crystals, cocrystals, and large single crystals, together with some potential applications, are introduced. A state-of-the-art overview of organic single-crystal electronics, with their challenges and prospects, is also provided.

Enhanced photoelectrical response of thermodynamically epitaxial organic crystals at the two-dimensional limit

Owing to strong light-matter interaction, two-dimensional (2D) organic crystal is regarded as promising materials for ultrasensitive photodetectors, however it still received limited success due to degraded photoelectrical response and problems in controllable growth. Here, we find the growth of 2D organic crystal obeys Gibbs-Curie-Wulff law, and develop a seed-epitaxial drop-casting method to grow millimeter-sized 1,4-bis(4-methylstyryl)benzene 2D crystals on SiO₂/Si in a thermodynamically controlled process. On SiO₂/Si, a distinct 2D limit effect is observed, which remarkably enhances internal photoresponsivity compared with bulk crystals. Experiment and calculation show the molecules stack more compactly at the 2D limit, thus better molecular orbital overlap and corresponding changes in the band structure lead to efficient separation and transfer of photo-generated carriers as well as enhanced photo-gating modulation. This work provides a general insight into the growth and the dimension effect of the 2D organic crystal, which is valuable for the application in high-performance photoelectrical devices.

To realize efficient optoelectronic devices based on two-dimensional (2D) organic crystals, optimizing the photoelectrical response and growth of these materials at the 2D limit is vital. Here, the authors report enhanced internal photoresponse in large-area 2D crystals using a novel growth method.

Investigation of Self-Assembly and Charge-Transport Property of One-dimensional PDI₈-CN₂ Nanowires by Solvent-Vapor Annealing

One-dimensional (1D) nanowires have attracted great interest, while air-stable n-type 1D nanowires still remain scarce. Herein, we present solvent-vapor annealing (SVA) made nanowires based on perylene tetracarboxylic diimide (PDI) derivative. It was found that the spin-coated thin films reorganized into nanowires distributed all over the substrate, as a result of the following solvent-vapor annealing effect. Cooperating with the atomic force microscopy and fluorescence microscopy characterization, the PDI₈-CN₂ molecules were supposed to conduct a long-range and entire transport to form the 1D nanowires through the SVA process, which may guarantee its potential morphology tailoring ability. In addition, the nanowire-based transistors displayed air stable electron mobility reaching to 0.15 cm² V-1 s-1, attributing to effective in situ reassembly. Owing to the broader application of organic small-molecule nanowires, this work opens up an attractive approach for exploring new high-performance micro- and nanoelectronics.

Organic 2D Optoelectronic Crystals: Charge Transport, Emerging Functions, and Their Design Perspective

2D organic semiconductor crystals are emerging as a fascinating platform with regard to their applications in organic field-effect transistors (OFETs), attributed to their enhanced charge transport efficiency and their new optoelectronic functions, based on their unique morphological features. Advances in material processing techniques have not only enabled easy fabrication of few-monolayered 2D nanostructures but also facilitated exploration of the interesting properties induced by characteristic 2D morphologies. However, to date, only a limited number of representative organic semiconductors have been utilized in organic 2D optoelectronics. Therefore, in order to further spur this research, an intuitive crystal engineering principle for realizing organic 2D crystals is required. In this regard, here, not only the important implications of applying 2D structures to OFET devices are discussed but also a crystal engineering protocol is provided that first predicts molecular arrangements depending on the molecular factors, which is followed by realizing 2D supramolecular synthon networks for different molecular packing motifs. It is expected that 2D organic semiconductor crystals developed by this approach will pave a promising way toward next-generation organic 2D optoelectronics.

Solution-processed single crystal microsheets of a novel dimeric phthalocyanine-involved triple-decker for high-performance ambipolar organic field effect transistors

Well-defined single crystal microsheets of a novel dimeric phthalocyanine involved sandwich-type triple-decker complex [Pc(SC₆H₁₃)₈]₂Eu₂[BiPc(SC₆H₁₃)₁₂]Eu₂[Pc(SC₆H₁₃)₈]₂ (1) are successfully prepared via a facile solution process. High-performance single crystal OFETs with a hole mobility of 18 cm² V^-1 s^-1 and an electron mobility of 0.3 cm² V^-1 s^-1 are obtained.

Self-Assembled α-Cyanostilbenes for Advanced Functional Materials

In the specific context of condensed media, the significant and increasing recent interest in the α-cyanostilbene (CS) motif [ArCHC(CN)Ar] is relevant. These compounds have shown remarkable optical features in addition to interesting electrical properties, and hence they are recognized as very suitable and versatile options for the development of functional materials. This progress report is focused on current and future use of CS structures and molecular assemblies with the aim of exploring and developing for the next generations of functional materials. A critical selection of illustrative materials that contain the CS motif, including relevant subfamilies such as the dicyanodistyrylbenzene and 2,3,3-triphenylacrylonitrile shows how, driven by the self-assembly of CS blocks, a variety of properties, effects, and possibilities for practical applications can be offered to the scientific community, through different rational routes for the elaboration of advanced materials. A survey is provided on the research efforts directed toward promoting the self-assembly of the solid state (polycrystalline solids, thin films, and single crystals), liquid crystals, nanostructures, and gels with multistimuli responsiveness, and applications for sensors, organic light-emitting diodes, organic field effect transistors, organic lasers, solar cells, or bioimaging purposes.