1
|
Li X, Chen L, Mao D, Li J, Xie W, Dong H, Zhang L. Low-threshold cavity-enhanced superfluorescence in polyhedral quantum dot superparticles. NANOSCALE ADVANCES 2024; 6:3220-3228. [PMID: 38868834 PMCID: PMC11166106 DOI: 10.1039/d4na00188e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/04/2024] [Accepted: 03/29/2024] [Indexed: 06/14/2024]
Abstract
Due to the unique and excellent optical performance and promising prospect for various photonics applications, cavity-enhanced superfluorescence (CESF) in perovskite quantum dot assembled superstructures has garnered wide attention. However, the stringent requirements and high threshold for achieving CESF limit its further development and application. The high threshold of CESF in quantum dot superstructures is mainly attributed to the low radiation recombination rate of the quantum dot and the unsatisfactory light field limiting the ability of the assembled superstructures originating from low controllability of self-assembly. Herein, we propose a strategy to reduce the threshold of CESF in quantum dot superstructure microcavities from two aspects: facet engineering optimization of quantum dot blocks and controllability improvement of the assembly method. We introduce dodecahedral quantum dots with lower nonradiative recombination, substituting frequently used cubic quantum dots as assembly blocks. Besides, we adopt the micro-emulsion droplet assembly method to obtain spherical perovskite quantum dot superparticles with high packing factors and orderly internal arrangements, which are more controllable and efficient than the conventional solvent-drying methods. Based on the dodecahedral quantum dot superparticles, we realized low-threshold CESF (Pth = 15.6 μJ cm-2). Our work provides a practical and scalable avenue for realizing low threshold CESF in quantum dot assembled superstructure systems.
Collapse
Affiliation(s)
- Xinjie Li
- Key Laboratory of Materials for High-Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences Shanghai 201800 China
- School of Physical Science and Technology, ShanghaiTech University Shanghai 201210 China
| | - Linqi Chen
- Key Laboratory of Materials for High-Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences Shanghai 201800 China
| | - Danqun Mao
- State Key Laboratory of Precision Spectroscopy, School of Physics and Electronic Science, East China Normal University Shanghai 200241 China
| | - Jingzhou Li
- Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences No. 1, Sub-Lane Xiangshan, Xihu District Hangzhou 310024 China
| | - Wei Xie
- State Key Laboratory of Precision Spectroscopy, School of Physics and Electronic Science, East China Normal University Shanghai 200241 China
| | - Hongxing Dong
- Key Laboratory of Materials for High-Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences Shanghai 201800 China
- Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences No. 1, Sub-Lane Xiangshan, Xihu District Hangzhou 310024 China
| | - Long Zhang
- Key Laboratory of Materials for High-Power Laser, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences Shanghai 201800 China
- School of Physical Science and Technology, ShanghaiTech University Shanghai 201210 China
- Hangzhou Institute for Advanced Study, University of Chinese Academy of Sciences No. 1, Sub-Lane Xiangshan, Xihu District Hangzhou 310024 China
| |
Collapse
|
2
|
Miah MH, Khandaker MU, Rahman MB, Nur-E-Alam M, Islam MA. Band gap tuning of perovskite solar cells for enhancing the efficiency and stability: issues and prospects. RSC Adv 2024; 14:15876-15906. [PMID: 38756852 PMCID: PMC11097048 DOI: 10.1039/d4ra01640h] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2024] [Accepted: 04/27/2024] [Indexed: 05/18/2024] Open
Abstract
The intriguing optoelectronic properties, diverse applications, and facile fabrication techniques of perovskite materials have garnered substantial research interest worldwide. Their outstanding performance in solar cell applications and excellent efficiency at the lab scale have already been proven. However, owing to their low stability, the widespread manufacturing of perovskite solar cells (PSCs) for commercialization is still far off. Several instability factors of PSCs, including the intrinsic and extrinsic instability of perovskite materials, have already been identified, and a variety of approaches have been adopted to improve the material quality, stability, and efficiency of PSCs. In this review, we have comprehensively presented the significance of band gap tuning in achieving both high-performance and high-stability PSCs in the presence of various degradation factors. By investigating the mechanisms of band gap engineering, we have highlighted its pivotal role in optimizing PSCs for improved efficiency and resilience.
Collapse
Affiliation(s)
- Md Helal Miah
- Applied Physics and Radiation Technologies Group, CCDCU, School of Engineering and Technology, Sunway University 47500 Bandar Sunway Selangor Malaysia
- Department of Physics, Bangabandhu Sheikh Mujibur Rahman Science and Technology University Gopalganj-8100 Bangladesh
| | - Mayeen Uddin Khandaker
- Applied Physics and Radiation Technologies Group, CCDCU, School of Engineering and Technology, Sunway University 47500 Bandar Sunway Selangor Malaysia
- Faculty of Graduate Studies, Daffodil International University Daffodil Smart City, Birulia, Savar Dhaka-1216 Bangladesh
| | - Md Bulu Rahman
- Department of Physics, Bangabandhu Sheikh Mujibur Rahman Science and Technology University Gopalganj-8100 Bangladesh
| | - Mohammad Nur-E-Alam
- Institute of Sustainable Energy, Universiti Tenaga Nasional Jalan IKRAM-UNITEN Kajang 43000 Selangor Malaysia
- School of Science, Edith Cowan University 270 Joondalup Drive Joondalup-6027 WA Australia
| | - Mohammad Aminul Islam
- Department of Electrical Engineering, Faculty of Engineering, Universiti Malaya, Jalan Universiti 50603 Kuala Lumpur Malaysia
| |
Collapse
|
3
|
Nagaoka Y, Schneider J, Jin N, Cai T, Liu Y, Wang Z, Li R, Kim KS, Chen O. Dynamic Transformation of High-Architectural Nanocrystal Superlattices upon Solvent Molecule Exposure. J Am Chem Soc 2024; 146:13093-13104. [PMID: 38690763 DOI: 10.1021/jacs.3c14603] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/03/2024]
Abstract
The cluster-based body-centered-cubic superlattice (cBCC SL) represents one of the most complicated structures among reported nanocrystal assemblies, comprised of 72 truncated tetrahedral quantum dots per unit cell. Our previous report revealed that truncated tetrahedral quantum dots within cBCC SLs possessed highly controlled translational and orientational order owing to an unusual energetic landscape based on the balancing of entropic and enthalpic contributions during the assembly process. However, the cBCC SL's structural transformability and mechanical properties, uniquely originating from such complicated nanostructures, have yet to be investigated. Herein, we report that cBCC SLs can undergo dynamic transformation to face-centered-cubic SLs in response to post-assembly molecular exposure. We monitored the dynamic transformation process using in situ synchrotron-based small-angle X-ray scattering, revealing a dynamic transformation involving multiple steps underpinned by interactions between incoming molecules and TTQDs' surface ligands. Furthermore, our mechanistic study demonstrated that the precise configuration of TTQDs' ligand molecules in cBCC SLs was key to their high structural transformability and unique jelly-like soft mechanical properties. While ligand molecular configurations in nanocrystal SLs are often considered minor features, our findings emphasize their significance in controlling weak van der Waals interactions between nanocrystals within assembled SLs, leading to previously unremarked superstructural transformability and unique mechanical properties. Our findings promote a facile route toward further creation of soft materials, nanorobotics, and out-of-equilibrium assemblies based on nanocrystal building blocks.
Collapse
Affiliation(s)
- Yasutaka Nagaoka
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Jeremy Schneider
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Na Jin
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Tong Cai
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Yuzi Liu
- Center for Nanoscale Materials, Argonne National Laboratory, Argonne, Illinois 60439, United States
| | - Zhongwu Wang
- Cornell High Energy Synchrotron Source, Cornell University, Ithaca, New York 14853, United States
| | - Ruipeng Li
- National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, New York 11973, United States
| | - Kyung-Suk Kim
- School of Engineering, Brown University, Providence, Rhode Island 02912, United States
| | - Ou Chen
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| |
Collapse
|
4
|
Chen L, Chu Y, Qin X, Gao Z, Zhang G, Zhang H, Wang Q, Li Q, Guo H, Li Y, Liu C. Ultrafast Dynamics Across Pressure-Induced Electronic State Transitions, Fluorescence Quenching, and Bandgap Evolution in CsPbBr 3 Quantum Dots. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2308016. [PMID: 38308192 PMCID: PMC11005694 DOI: 10.1002/advs.202308016] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/23/2023] [Revised: 01/17/2024] [Indexed: 02/04/2024]
Abstract
This work investigates the impact of pressure on the structural, optical properties, and electronic structure of CsPbBr3 quantum dots (QDs) using steady-state photoluminescence, steady-state absorption, and femtosecond transient absorption spectroscopy, reaching a maximum pressure of 3.38 GPa. The experimental results indicate that CsPbBr3 QDs undergo electronic state (ES) transitions from ES-I to ES-II and ES-II to ES-III at 0.38 and 1.08 GPa, respectively. Intriguingly, a mixed state of ES-II and ES-III is observed within the pressure range of 1.08-1.68 GPa. The pressure-induced fluorescence quenching in ES-II is attributed to enhanced defect trapping and reduced radiative recombination. Above 1.68 GPa, fluorescence vanishes entirely, attributed to the complete phase transformation from ES-II to ES-III in which radiative recombination becomes non-existent. Notably, owing to stronger quantum confinement effects, CsPbBr3 QDs exhibit an impressive bandgap tuning range of 0.497 eV from 0 to 2.08 GPa, outperforming nanocrystals by 1.4 times and bulk counterparts by 11.3 times. Furthermore, this work analyzes various carrier dynamics processes in the pressure-induced bandgap evolution and electron state transitions, and systematically studies the microphysical mechanisms of optical properties in CsPbBr3 QDs under pressure, offering insights for optimizing optical properties and designing novel materials.
Collapse
Affiliation(s)
- Lin Chen
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Ya Chu
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Xiaxia Qin
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Zhijian Gao
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Guozhao Zhang
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Haiwa Zhang
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Qinglin Wang
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Qian Li
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| | - Haizhong Guo
- Key Laboratory of Material PhysicsMinistry of EducationSchool of Physics and MicroelectronicsZhengzhou UniversityZhengzhou450052P. R. China
| | - Yinwei Li
- Laboratory of Quantum Functional Materials Design and ApplicationSchool of Physics and Electronic EngineeringJiangsu Normal UniversityXuzhou221116P. R. China
| | - Cailong Liu
- School of Physics Science & Information TechnologyLiaocheng UniversityLiaocheng252059P. R. China
| |
Collapse
|
5
|
Cueto C, Hu M, Russell TP, Emrick T. Conjugated Zwitterionic Oligomers as Ligands on Perovskite Nanocrystals: Hybrid Structures with Tunable Interparticle Spacing. J Am Chem Soc 2024; 146:8189-8197. [PMID: 38471087 DOI: 10.1021/jacs.3c12723] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/14/2024]
Abstract
Conventional ligands for CsPbBr3 perovskite nanocrystals (NCs), composed of polar, coordinating head groups (e.g., ammonium or zwitterionic) and aliphatic tails, are instrumental in stabilizing the NCs against sintering and aggregation. Nonetheless, the aliphatic (insulating) nature of these ligands represents drawbacks with respect to objectives in optoelectronics, and yet removing these ligands typically leads to a loss of colloidal stability. In this paper, we describe the preparation of CsPbBr3 NCs in the presence of discrete conjugated oligomers that were prepared by an iterative synthetic approach and capped at their chain ends with sulfobetaine zwitterions for perovskite coordination. Notably, these zwitterionic oligofluorenes are compatible with the hot injection and ligand exchange conditions used to prepare CsPbBr3 NCs, yielding stable NC dispersions with high photoluminescence quantum yields (PLQY, >90%) and spectral features representative of both the perovskite core and conjugated ligand shell. Controlling the chain length of these capping ligands effectively regulated inter-NC spacing and packing geometry when cast into solid films, with evidence derived from both transmission electron microscopy (TEM) and grazing incidence X-ray scattering measurements.
Collapse
Affiliation(s)
- Christopher Cueto
- Department of Polymer Science & Engineering, University of Massachusetts, Conte Center for Polymer Research, 120 Governors Dr, Amherst, Massachusetts 01003, United States
| | - Mingqiu Hu
- Department of Polymer Science & Engineering, University of Massachusetts, Conte Center for Polymer Research, 120 Governors Dr, Amherst, Massachusetts 01003, United States
| | - Thomas P Russell
- Department of Polymer Science & Engineering, University of Massachusetts, Conte Center for Polymer Research, 120 Governors Dr, Amherst, Massachusetts 01003, United States
| | - Todd Emrick
- Department of Polymer Science & Engineering, University of Massachusetts, Conte Center for Polymer Research, 120 Governors Dr, Amherst, Massachusetts 01003, United States
| |
Collapse
|
6
|
Aebli M, Kaul CJ, Yazdani N, Krieg F, Bernasconi C, Guggisberg D, Marczak M, Morad V, Piveteau L, Bodnarchuk MI, Verel R, Wood V, Kovalenko MV. Disorder and Halide Distributions in Cesium Lead Halide Nanocrystals as Seen by Colloidal 133Cs Nuclear Magnetic Resonance Spectroscopy. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2024; 36:2767-2775. [PMID: 38558917 PMCID: PMC10976639 DOI: 10.1021/acs.chemmater.3c02901] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/15/2023] [Revised: 03/02/2024] [Accepted: 03/04/2024] [Indexed: 04/04/2024]
Abstract
Colloidal nuclear magnetic resonance (cNMR) spectroscopy on inorganic cesium lead halide nanocrystals (CsPbX3 NCs) is found to serve for noninvasive characterization and quantification of disorder within these structurally soft and labile particles. In particular, we show that 133Cs cNMR is highly responsive to size variations from 3 to 11 nm or to altering the capping ligands on the surfaces of CsPbX3 NCs. Distinct 133Cs signals are attributed to the surface and core NC regions. Increased heterogeneous broadening of 133Cs signals, observed for smaller NCs as well as for long-chain zwitterionic capping ligands (phosphocholines, phosphoethanol(propanol)amine, and sulfobetaines), can be attributed to more significant surface disorder and multifaceted surfaces (truncated cubes). On the contrary, capping with dimethyldidodecylammonium bromide (DDAB) successfully reduces signal broadening owing to better surface passivation and sharper (001)-bound cuboid shape. DFT calculations on various sizes of NCs corroborate the notion that the surface disorder propagates over several octahedral layers. 133Cs NMR is a sensitive probe for studying halide gradients in mixed Br/Cl NCs, indicating bromide-rich surfaces and chloride-rich cores. On the contrary, mixed Br/I NCs exhibit homogeneous halide distributions.
Collapse
Affiliation(s)
- Marcel Aebli
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Christoph J. Kaul
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Nuri Yazdani
- Department
of Information Technology and Electrical Engineering, ETH Zürich, Vladimir-Prelog-Weg
1-5, Zürich CH-8093, Switzerland
| | - Franziska Krieg
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Caterina Bernasconi
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Dominic Guggisberg
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Malwina Marczak
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Viktoriia Morad
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Laura Piveteau
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - Maryna I. Bodnarchuk
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| | - René Verel
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
| | - Vanessa Wood
- Department
of Information Technology and Electrical Engineering, ETH Zürich, Vladimir-Prelog-Weg
1-5, Zürich CH-8093, Switzerland
| | - Maksym V. Kovalenko
- Department
of Chemistry and Applied Biosciences, ETH
Zürich, Vladimir-Prelog-Weg 1-5, Zürich CH-8093, Switzerland
- Empa-Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, Dübendorf CH-8600, Switzerland
| |
Collapse
|
7
|
Li C, Li X, Liu X, Ma L, Yan H, Tong L, Yang Z, Liu J, Bao D, Yin J, Li X, Wang P, Li R, Huang L, Yu M, Jia S, Wang T. On-Substrate Fabrication of CsPbBr 3 Single-Crystal Microstructures via Nanoparticle Self-Assembly-Assisted Low-Temperature Sintering. ACS NANO 2024; 18:9128-9136. [PMID: 38492230 DOI: 10.1021/acsnano.4c00326] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 03/18/2024]
Abstract
The growth of all-inorganic perovskite single-crystal microstructures on substrates is a promising approach for constructing photonic and electronic microdevices. However, current preparation methods typically involve direct control of ions or atoms, which often depends on specific lattice-matched substrates for epitaxial growth and other stringent conditions that limit the mild preparation and flexibility of device integration. Herein, we present the on-substrate fabrication of CsPbBr3 single-crystal microstructures obtained via a nanoparticle self-assembly assisted low-temperature sintering (NSALS) method. Sintering guided by self-assembled atomically oriented superlattice embryos facilitated the formation of single-crystal microstructures under mild conditions without substrate dependence. The as-prepared on-substrate microstructures exhibited a consistent out-of-plane orientation with a carrier lifetime of up to 82.7 ns. Photodetectors fabricated by using these microstructures exhibited an excellent photoresponse of 9.15 A/W, and the dynamic optical response had a relative standard deviation as low as 0.1831%. The discrete photosensor microarray chip with 174000 pixels in a 100 mm2 area showed a response difference of less than 6%. This method of nanoscale particle-controlled single crystal growth on a substrate offers a perspective for mild-condition preparation and in situ repair of crystals of various types. This advancement can propel the flexible integration and widespread application of perovskite devices.
Collapse
Affiliation(s)
- Cancan Li
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Analytical Chemistry for Living Biosystems, Institute of Chemistry, Chinese Academy of Sciences (CAS), Beijing 100049, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Xiao Li
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Xiang Liu
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Lindong Ma
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Hui Yan
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Lei Tong
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Zhibo Yang
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Jiaxing Liu
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Deyu Bao
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Jikun Yin
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Xiujun Li
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Peng Wang
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Rong Li
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Lei Huang
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Miao Yu
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Sitong Jia
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Tie Wang
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Analytical Chemistry for Living Biosystems, Institute of Chemistry, Chinese Academy of Sciences (CAS), Beijing 100049, P. R. China
- University of Chinese Academy of Sciences, Beijing 100049, P. R. China
- Tianjin Key Laboratory of Life and Health Detection, Life and Health Intelligent Research Institute, Tianjin University of Technology, Tianjin 300384, P. R. China
| |
Collapse
|
8
|
Wang CW, Oyeka EE, Altman AB, Son DH. Effects of Pressure on Exciton Absorption and Emission in Strongly Quantum-Confined CsPbBr 3 Quantum Dots and Nanoplatelets. THE JOURNAL OF PHYSICAL CHEMISTRY. C, NANOMATERIALS AND INTERFACES 2024; 128:2062-2069. [PMID: 38352853 PMCID: PMC10860125 DOI: 10.1021/acs.jpcc.3c08029] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/07/2023] [Revised: 01/13/2024] [Accepted: 01/17/2024] [Indexed: 02/16/2024]
Abstract
Soft lattices of metal halide perovskite (MHP) nanocrystals (NCs) are considered responsible for many of their optical properties associated with excitons, which are often distinct from other semiconductor NCs. Earlier studies of MHP NCs upon compression revealed how structural changes and the resulting changes in the optical properties such as the bandgap can be induced at relatively low pressures. However, the pressure response of the exciton transition itself in MHP NCs remains relatively poorly understood due to limitations inherent to studying weakly or nonconfined NCs in which exciton absorption peaks are not well-separated from the continuum interband transition. Here, we investigated the pressure response of the absorbing and emitting transitions of excitons using strongly quantum-confined CsPbBr3 quantum dots (QDs) and nanoplatelets (NPLs), which both exhibit well-defined exciton absorption peaks. Notably, the reversible vanishing and recovery of the exciton absorption accompanied by reversible quenching and recovery of the emission were observed in both QDs and NPLs, resulting from the reversible pressure modulation of the exciton oscillator strength. Furthermore, CsPbBr3 NPLs exhibited irreversible pressure-induced creation of trap states at low pressures (∼0.1 GPa) responsible for trapped exciton emission that developed on the time scale of ∼10 min, while the reversible pressure response of the absorbing exciton transition was maintained. These findings shed light on the diverse effects the application of force has on the absorbing and emitting exciton transitions in MHP NCs, which are important for their application as excitonic light emitters in high-pressure environments.
Collapse
Affiliation(s)
- Chih-Wei Wang
- Department
of Chemistry, Texas A&M University, College Station, Texas 77843, United States
| | - Ebube E. Oyeka
- Department
of Chemistry, Texas A&M University, College Station, Texas 77843, United States
| | - Alison B. Altman
- Department
of Chemistry, Texas A&M University, College Station, Texas 77843, United States
| | - Dong Hee Son
- Department
of Chemistry, Texas A&M University, College Station, Texas 77843, United States
- Department
of Physics and Astronomy, Texas A&M
University, College Station, Texas 77843, United States
- Center
for Nanomedicine, Institute for Basic Science and Graduate Program
of Nano Biomedical Engineering, Advanced Science Institute, Yonsei University, Seoul 03722, Republic of Korea
| |
Collapse
|
9
|
Cai T, Shi W, Wu R, Chu C, Jin N, Wang J, Zheng W, Wang X, Chen O. Lanthanide Doping into All-Inorganic Heterometallic Halide Layered Double Perovskite Nanocrystals for Multimodal Visible and Near-Infrared Emission. J Am Chem Soc 2024; 146:3200-3209. [PMID: 38276958 DOI: 10.1021/jacs.3c11164] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2024]
Abstract
The introduction of lanthanide ions (Ln3+) into all-inorganic lead-free halide perovskites has captured significant attention in optoelectronic applications. However, doping Ln3+ ions into heterometallic halide layered double perovskite (LDP) nanocrystals (NCs) and their associated doping mechanisms remain unexplored. Herein, we report the first colloidal synthesis of Ln3+ (Yb3+, Er3+)-doped LDP NCs utilizing a modified hot-injection method. The resulting NCs exhibit efficient near-infrared (NIR) photoluminescence in both NIR-I and NIR-II regions, achieved through energy transfer down-conversion mechanisms. Density functional theory calculations reveal that Ln3+ dopants preferentially occupy the Sb3+ cation positions, resulting in a disruption of local site symmetry of the LDP lattices. By leveraging sensitizations of intermediate energy levels, we delved into a series of Ln3+-doped Cs4M(II)Sb2Cl12 (M(II): Cd2+ or Mn2+) LDP NCs via co-doping strategies. Remarkably, we observe a brightening effect of the predark states of Er3+ dopant in the Er3+-doped Cs4M(II)Sb2Cl12 LDP NCs owing to the Mn component acting as an intermediate energy bridge. This study not only advances our understanding of energy transfer mechanisms in doped NCs but also propels all-inorganic LDP NCs for a wider range of optoelectronic applications.
Collapse
Affiliation(s)
- Tong Cai
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Wenwu Shi
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
- Institute of Information Technology, Shenzhen Institute of Information Technology, Shenzhen 518172, China
| | - Rongzhen Wu
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Chun Chu
- Department of Chemistry, Syracuse University, Syracuse, New York 13244, United States
| | - Na Jin
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Junyu Wang
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| | - Weiwei Zheng
- Department of Chemistry, Syracuse University, Syracuse, New York 13244, United States
| | - Xinzhong Wang
- Institute of Information Technology, Shenzhen Institute of Information Technology, Shenzhen 518172, China
| | - Ou Chen
- Department of Chemistry, Brown University, Providence, Rhode Island 02912, United States
| |
Collapse
|
10
|
Wang C, Matta SK, Ng CK, Cao C, Sharma M, Chesman ASR, Russo SP, Jasieniak JJ. Direct synthesis of CsPbX 3 perovskite nanocrystal assemblies. NANOSCALE 2024; 16:614-623. [PMID: 38086654 DOI: 10.1039/d3nr04285e] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/04/2024]
Abstract
Inorganic CsPbX3 (X = Cl, Br, I) perovskite nanocrystals (NCs) possess many advantageous optoelectronic properties, making them an attractive candidate for light emitting diodes, lasers, or photodetector applications. Such perovskite NCs can form extended assemblies that further modify their bandgap and emission wavelength. In this article, a facile direct synthesis of CsPbX3 NC assemblies that are 1 μm in size and are composed of 10 nm-sized NC building blocks is reported. The direct synthesis of these assemblies with a conventional hot-injection method of the NCs is achieved through the judicious selection of the solvent, ligands, and reaction stoichiometry. Only under selective reaction conditions where the surface ligand environment is tuned to enhance the hydrophobic interactions between ligand chains of neighbouring NCs is self-assembly achieved. These assemblies possess narrow and red-shifted photoluminescence compared to their isolated NC counterparts, which further expands the colour gamut that can be rendered from inorganic perovskites. This is demonstrated through simple down-converting light emitters.
Collapse
Affiliation(s)
- Chujie Wang
- ARC Centre of Excellence in Exciton Science, Department of Materials Science and Engineering, Monash University, Clayton, Victoria 3800, Australia.
| | - Sri K Matta
- ARC Centre of Excellence in Exciton Science, School of Science, RMIT University, Melbourne 3000, Australia
- Center for Computational Sciences, University of Tsukuba, Japan
| | - Chun Kiu Ng
- ARC Centre of Excellence in Exciton Science, Department of Materials Science and Engineering, Monash University, Clayton, Victoria 3800, Australia.
| | - Chang Cao
- ARC Centre of Excellence in Exciton Science, Department of Materials Science and Engineering, Monash University, Clayton, Victoria 3800, Australia.
| | - Manoj Sharma
- ARC Centre of Excellence in Exciton Science, Department of Materials Science and Engineering, Monash University, Clayton, Victoria 3800, Australia.
| | - Anthony S R Chesman
- CSIRO Manufacturing, Ian Wark Laboratories, Research Way, Clayton, VIC 3168, Australia
| | - Salvy P Russo
- ARC Centre of Excellence in Exciton Science, School of Science, RMIT University, Melbourne 3000, Australia
| | - Jacek J Jasieniak
- ARC Centre of Excellence in Exciton Science, Department of Materials Science and Engineering, Monash University, Clayton, Victoria 3800, Australia.
| |
Collapse
|
11
|
Lv P, Zhao D, Ma Z, Cong M, Sui Y, Xiao G, Zou B. Pressure-Modulated Interface Engineering toward Realizing Core@Shell Configuration Transition. NANO LETTERS 2023; 23:11982-11988. [PMID: 38051759 DOI: 10.1021/acs.nanolett.3c04359] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/07/2023]
Abstract
The strained interface of core@shell nanocrystals (NCs) can effectively modulate the energy level alignment, thereby significantly affecting the optical properties. Herein, the unique photoluminescence (PL) response of doped Mn ions is introduced as a robust probe to detect the targeted pressure-strain relation of CdS@ZnS NCs. Results show that the core experiences actually less pressure than the applied external pressure, attributed to the pressure-induced optimized interface that reduces the compressive strain on core. The pressure difference between core and shell increases the conduction band and valence band offsets and further achieves the core@shell configuration transition from quasi type II to type I. Accordingly, the PL intensity of CdS@ZnS NCs slightly increases, along with a faster blue-shift rate of PL peak under low pressure. This study elucidates the interplay between external physical pressure and interfacial chemical stress for core@shell NCs, leading to precise construction of interface engineering for practical applications.
Collapse
Affiliation(s)
- Pengfei Lv
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, People's Republic of China
| | - Dianlong Zhao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, People's Republic of China
| | - Zhiwei Ma
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, People's Republic of China
| | - Ming Cong
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, People's Republic of China
| | - Yongming Sui
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, People's Republic of China
| | - Guanjun Xiao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, People's Republic of China
| | - Bo Zou
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, People's Republic of China
| |
Collapse
|
12
|
Li Q, Xu B, Quan Z. Pressure-Regulated Excitonic Transitions in Emergent Metal Halides. Acc Chem Res 2023; 56:3282-3291. [PMID: 37890133 DOI: 10.1021/acs.accounts.3c00537] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/29/2023]
Abstract
ConspectusEmergent metal halides are generating significant interest as novel optical materials, and their diverse applications have brought them to the spotlight of chemistry and material science. The optical properties of semiconducting metal halides are fundamentally dominated by excitonic transitions, which refer to the complex processes of excitonic formation, self-trapping, as well as subsequent transitions of intersystem crossing (ISC) and internal conversion (IC). In this regard, high pressure has recently opened a new research dimension to regulate excitonic transitions in metal halides via continuous structural modulations, to understand the intriguing excitonic emissions from a new perspective. In this Account, we aim to rationalize the fundamental strategy for modulating and optimizing the optical properties of metal halides based on delicate exciton regulation via high-pressure method. First, the band gaps of metal halides that are directly related to the efficiency of excitonic formation, are accurately modulated through contraction, distortion, and destruction of metal-halogen polyhedra under compression. Then, considerable enhancement of self-trapped exciton emission is demonstrated by inducing proper polyhedral distortions via high-pressure method. Furthermore, the emission energy of metal halides could also be controllably and widely tuned through pressure-modulated excitonic transitions. Upon compression on different metal halides, excitonic IC is promoted with sufficient polyhedral distortions, and different sets of ISC could also be achieved. In the end, we emphasize the significance of high-pressure investigations in uncovering the complex excitonic transitions in emergent metal halides and predicting novel metal halides with desired optical properties at ambient conditions. It is expected that these discussions could inspire researchers in different fields to perform interdisciplinary high-pressure studies on novel functional materials.
Collapse
Affiliation(s)
- Qian Li
- Department of Chemistry, Southern University of Science and Technology (SUSTech), Shenzhen, Guangdong 518055, P. R. China
- School of Physics Science and Information Technology, Shandong Key Laboratory of Optical Communication Science and Technology, Liaocheng University, Liaocheng, Shandong 252000, P. R. China
| | - Bin Xu
- Department of Chemistry, Southern University of Science and Technology (SUSTech), Shenzhen, Guangdong 518055, P. R. China
| | - Zewei Quan
- Department of Chemistry, Southern University of Science and Technology (SUSTech), Shenzhen, Guangdong 518055, P. R. China
| |
Collapse
|
13
|
Meng L, Vu TV, Criscenti LJ, Ho TA, Qin Y, Fan H. Theoretical and Experimental Advances in High-Pressure Behaviors of Nanoparticles. Chem Rev 2023; 123:10206-10257. [PMID: 37523660 DOI: 10.1021/acs.chemrev.3c00169] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 08/02/2023]
Abstract
Using compressive mechanical forces, such as pressure, to induce crystallographic phase transitions and mesostructural changes while modulating material properties in nanoparticles (NPs) is a unique way to discover new phase behaviors, create novel nanostructures, and study emerging properties that are difficult to achieve under conventional conditions. In recent decades, NPs of a plethora of chemical compositions, sizes, shapes, surface ligands, and self-assembled mesostructures have been studied under pressure by in-situ scattering and/or spectroscopy techniques. As a result, the fundamental knowledge of pressure-structure-property relationships has been significantly improved, leading to a better understanding of the design guidelines for nanomaterial synthesis. In the present review, we discuss experimental progress in NP high-pressure research conducted primarily over roughly the past four years on semiconductor NPs, metal and metal oxide NPs, and perovskite NPs. We focus on the pressure-induced behaviors of NPs at both the atomic- and mesoscales, inorganic NP property changes upon compression, and the structural and property transitions of perovskite NPs under pressure. We further discuss in depth progress on molecular modeling, including simulations of ligand behavior, phase-change chalcogenides, layered transition metal dichalcogenides, boron nitride, and inorganic and hybrid organic-inorganic perovskites NPs. These models now provide both mechanistic explanations of experimental observations and predictive guidelines for future experimental design. We conclude with a summary and our insights on future directions for exploration of nanomaterial phase transition, coupling, growth, and nanoelectronic and photonic properties.
Collapse
Affiliation(s)
- Lingyao Meng
- Department of Chemistry & Chemical Biology, University of New Mexico, Albuquerque, New Mexico 87106, United States
| | - Tuan V Vu
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| | - Louise J Criscenti
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| | - Tuan A Ho
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| | - Yang Qin
- Department of Chemical & Biomolecular Engineering, Institute of Materials Science, University of Connecticut, Mansfield, Connecticut 06269, United States
| | - Hongyou Fan
- Geochemistry Department, Sandia National Laboratories, Albuquerque, New Mexico 87185, United States
| |
Collapse
|
14
|
Ghosh A, Rahman MF, Islam MR, Islam MS, Amami M, Hossain MK, Md Ismail AB. Inorganic novel cubic halide perovskite Sr 3AsI 3: Strain-activated electronic and optical properties. Heliyon 2023; 9:e19271. [PMID: 37654463 PMCID: PMC10465963 DOI: 10.1016/j.heliyon.2023.e19271] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/05/2023] [Revised: 08/10/2023] [Accepted: 08/17/2023] [Indexed: 09/02/2023] Open
Abstract
In recent years, inorganic perovskite materials have attracted a lot of attention in the field of solar technology due to their exceptional structural, optical, and electronic properties. This study thoroughly investigated, using first-principles density-functional theory (FP-DFT), the impact of compressive and tensile strain on the structural, optical, and electrical properties of the inorganic cubic perovskite Sr3AsI3. The unstrained planar Sr3AsI3 molecule exhibits a direct bandgap of 1.265 eV value at Γ point. The bandgap of the Sr3AsI3 perovskite is lowered to 1.212 eV when the relativistic spin-orbital coupling (SOC) effect is subjected in the observations. In addition, the structure's bandgap exhibits a falling prevalence due to compressive strain and a slight rise due to tensile strain. The optical indicators such as dielectric functions, absorption coefficient, reflectivity, and electron loss function show that this component has a great ability to absorb in the visible range in accordance with band characteristics. When compressive strain is raised, it is discovered that the spikes of the dielectric constant of Sr3AsI3 move to lower photon energy (redshift), and conversely, while growing tensile strain, it exhibits increased photon energy changing behavior (blueshift). As a result, the Sr3AsI3 perovskite is regarded as being ideal for use in solar cells for the production of electricity and light management.
Collapse
Affiliation(s)
- Avijit Ghosh
- Advanced Energy Materials and Solar Cell Research Laboratory, Department of Electrical and Electronic Engineering, Begum Rokeya University, Rangpur 5400, Bangladesh
| | - Md Ferdous Rahman
- Advanced Energy Materials and Solar Cell Research Laboratory, Department of Electrical and Electronic Engineering, Begum Rokeya University, Rangpur 5400, Bangladesh
- Solar Energy Laboratory, Department of Electrical and Electronic Engineering, University of Rajshahi, Rajshahi 6205, Bangladesh
| | - Md Rasidul Islam
- Department of Electrical and Electronic Engineering, Bangamata Sheikh Fojilatunnesa Mujib Science & Technology University, Jamalpur-2012, Bangladesh
| | - Md Shoriful Islam
- Advanced Energy Materials and Solar Cell Research Laboratory, Department of Electrical and Electronic Engineering, Begum Rokeya University, Rangpur 5400, Bangladesh
| | - Mongi Amami
- Department of Chemistry, College of Sciences, King Khalid University, P.O. Box 9004, Abha, Saudi Arabia
| | - M. Khalid Hossain
- Institute of Electronics, Atomic Energy Research Establishment, Bangladesh Atomic Energy Commission, Dhaka 1349, Bangladesh
| | - Abu Bakar Md Ismail
- Solar Energy Laboratory, Department of Electrical and Electronic Engineering, University of Rajshahi, Rajshahi 6205, Bangladesh
| |
Collapse
|
15
|
Peng C, Yang S, Luo G, Yan S, Shakouri M, Zhang J, Chen Y, Wang Z, Wei W, Sham TK, Zheng G. Over 2 A cm -2 CO 2 -to-Ethanol Conversion by Alkali-Metal Cation Induced Copper With Dominant (200) Facets. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2207374. [PMID: 36896986 DOI: 10.1002/smll.202207374] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/17/2022] [Revised: 02/19/2023] [Indexed: 06/08/2023]
Abstract
The high-rate ethanol electrosynthesis from CO2 is challenging due to the low selectivity and poor activity, which requires the competition with other reduction products and H2 . Here, the electrochemical reconstruction of Cs3 Cu2 Cl5 perovskite to form surface Cl-bonded, low-coordinated Cs modified Cu(200) nanocubes (CuClCs), is demonstrated. Density functional theory calculations reveal that the CuClCs structure possesses low Bader charges and a large coordination capacity; and thus, can promote the CO2 -to-ethanol pathway via stabilizing C-O bond in oxygenate intermediates. The CuClCs catalyst exhibits outstanding partial current densities for producing ethanol (up to 2124 ± 54 mA cm-2 ) as one of the highest reported values in the electrochemical CO2 or CO reduction. This work suggests an attractive strategy with surface alkali-metal cations for ampere-level CO2 -to-ethanol electrosynthesis.
Collapse
Affiliation(s)
- Chen Peng
- Laboratory of Advanced Materials, Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai, 200438, China
| | - Songtao Yang
- Laboratory of Advanced Materials, Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai, 200438, China
| | - Gan Luo
- Henan Engineering Center of New Energy Battery Materials, Henan D&A Engineering Center of Advanced Battery Materials, College of Chemistry and Chemical Engineering, Shangqiu Normal University, Shangqiu, 476000, China
| | - Shuai Yan
- Laboratory of Advanced Materials, Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai, 200438, China
| | - Mohsen Shakouri
- Canadian Light Source Inc. , University of Saskatchewan, Saskatoon, SK, S7N 2V3, Canada
| | - Junbo Zhang
- Laboratory of Advanced Materials, Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai, 200438, China
| | - Yangshen Chen
- Laboratory of Advanced Materials, Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai, 200438, China
| | - Zhiqiang Wang
- Department of Chemistry, University of Western Ontario, 1151 Richmond Street, London, ON, N6A 5B7, Canada
| | - Wei Wei
- Henan Engineering Center of New Energy Battery Materials, Henan D&A Engineering Center of Advanced Battery Materials, College of Chemistry and Chemical Engineering, Shangqiu Normal University, Shangqiu, 476000, China
| | - Tsun-Kong Sham
- Department of Chemistry, University of Western Ontario, 1151 Richmond Street, London, ON, N6A 5B7, Canada
| | - Gengfeng Zheng
- Laboratory of Advanced Materials, Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Fudan University, Shanghai, 200438, China
| |
Collapse
|
16
|
Mireles Villegas N, Hernandez JC, John JC, Sheldon M. Promoting solution-phase superlattices of CsPbBr 3 nanocrystals. NANOSCALE 2023. [PMID: 37171143 DOI: 10.1039/d3nr00693j] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
We present a size-selective method for purifying and isolating perovskite CsPbBr3 nanocrystals (NCs) that preserves their as-synthesized surface chemistry and extremely high photoluminescence quantum yields (PLQYs). The isolation procedure is based on the stepwise evaporation of nonpolar co-solvents with high vapor pressure to promote precipitation of a size-selected product. As the sample fractions become more uniform in size, we observe that the NCs self-assemble into colloidally stable, solution-phase superlattices (SLs). Small angle X-ray scattering (SAXS) and dynamic light scattering (DLS) studies show that the solution-phase SLs contain 1000s of NCs per supercrystal in a simple cubic, face-to-face packing arrangement. The SLs also display systematically faster radiative decay dynamics and improved PLQYs, as well as unique spectral absorption features likely resulting from inter-particle electronic coupling effects. This study is the first demonstration of solution-phase CsPbBr3 SLs and highlights their potential for achieving collective optoelectronic phenomena previously observed from solid-state assemblies.
Collapse
Affiliation(s)
| | - Josue C Hernandez
- Department of Chemistry, Texas A&M University, College Station, Texas 77842, USA.
| | - Joshua C John
- Department of Material Science and Engineering, Texas A&M University, College Station, Texas 77840, USA
| | - Matthew Sheldon
- Department of Chemistry, Texas A&M University, College Station, Texas 77842, USA.
- Department of Material Science and Engineering, Texas A&M University, College Station, Texas 77840, USA
| |
Collapse
|
17
|
Shi Y, Fu Y, Ma Z, Zhao D, Wang K, Xiao G, Zou B. Pressure Regulating Self-Trapped States toward Remarkable Emission Enhancement of Zero-Dimensional Lead-Free Halides Nanocrystals. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2300455. [PMID: 36808884 DOI: 10.1002/smll.202300455] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/15/2023] [Revised: 02/04/2023] [Indexed: 05/25/2023]
Abstract
Copper(I)-based halides have recently attracted increasing attention as a substitute for lead halides, owing to their nontoxicity, abundance, unique structure, and optoelectric properties. However, exploring an effective strategy to further improve their optical activities and revealing structure-optical property relationships still remain a great concern. Here, by using high pressure technique, a remarkable enhancement of self-trapped exciton (STE) emission associated with the energy exchange between multiple self-trapped states in zero-dimensional lead-free halide Cs3 Cu2 I5 NCs is successfully achieved. Furthermore, high-pressure processing endows the piezochromism of Cs3 Cu2 I5 NCs by experiencing a white light and a strong purple light emission, which is able to be stabilized at near-ambient pressure. The distortion of [Cu2 I5 ] clusters composing of tetrahedral [CuI4 ] and trigonal planar [CuI3 ] and the decreased Cu-Cu distance between the adjacent Cu-I tetrahedron and triangle are responsible for the significant STEs emission enhancement under high pressure. The experiments combined with first-principles calculations not only shed light on the structure-optical property relationships of [Cu2 I5 ] clusters halide, but also provide guidance for improving emission intensity that is highly desirable in solid-state lighting applications.
Collapse
Affiliation(s)
- Yue Shi
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, P. R. China
| | - Yuan Fu
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, P. R. China
| | - Zhiwei Ma
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, P. R. China
| | - Dianlong Zhao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, P. R. China
| | - Kai Wang
- Shandong Key Laboratory of Optical Communication Science and Technology, School of Physics Science and Information Technology, Liaocheng University, Liaocheng, 252000, P. R. China
| | - Guanjun Xiao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, P. R. China
| | - Bo Zou
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, P. R. China
| |
Collapse
|
18
|
Behera RK, Bera S, Pradhan N. Hexahedron Symmetry and Multidirectional Facet Coupling of Orthorhombic CsPbBr 3 Nanocrystals. ACS NANO 2023; 17:7007-7016. [PMID: 36996308 DOI: 10.1021/acsnano.3c01617] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
The cube shape of orthorhombic phase CsPbBr3 nanocrystals possesses the ability of selective facet packing that leads to 1D, 2D, and 3D nanostructures. In solution, their transformation with linear one-dimensional packing to nanorods/nanowires is extensively studied. Here, multifacet coupling in two directions of the truncated cube nanocrystals to rod couples and then to single-crystalline rectangular rods is reported. With extensive high-resolution transmission electron microscopy image analysis, length and width directions of these nanorods are derived. For the seed cube structures, finding {110} and {002} facets has remained difficult as these possess the hexahedron symmetry and their size remains smaller; however, for nanorods, these planes and the ⟨110⟩ and ⟨001⟩ directions are clearly identified. From nanocrystal to nanorod formation, the alignment directions are observed as random (as shown in the abstract graphic), and this could vary from one to the other rods obtained in the same batch of samples. Moreover, seed nanocrystal connections are derived here as not random and are rather induced by addition of the calculated amount of additional Pb(II). The same has also been extended to nanocubes obtained from different literature methods. It is predicted that a Pb-bromide buffer octahedra layer was created to connect two cubes, and this can connect along one, two, or even more facets of cubes simultaneously to connect other cubes and form different nanostructures. Hence, these results here provide some basic fundamentals of seed cube connections, the driving force to connect those, trapping the intermediate to visualize their alignments for attachments, and identifying and establishing the orthorhombic ⟨110⟩ and ⟨001⟩ directions of the length and width of CsPbBr3 nanostructures.
Collapse
Affiliation(s)
- Rakesh Kumar Behera
- School of Materials Sciences, Indian Association for the Cultivation of Science, Kolkata 700032, India
| | - Suman Bera
- School of Materials Sciences, Indian Association for the Cultivation of Science, Kolkata 700032, India
| | - Narayan Pradhan
- School of Materials Sciences, Indian Association for the Cultivation of Science, Kolkata 700032, India
| |
Collapse
|
19
|
Liu Z, Qin X, Chen Q, Jiang T, Chen Q, Liu X. Metal-Halide Perovskite Nanocrystal Superlattice: Self-Assembly and Optical Fingerprints. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2209279. [PMID: 36738101 DOI: 10.1002/adma.202209279] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/09/2022] [Revised: 01/07/2023] [Indexed: 06/18/2023]
Abstract
Self-assembly of nanocrystals into superlattices is a fascinating process that not only changes geometric morphology, but also creates unique properties that considerably enrich the material toolbox for new applications. Numerous studies have driven the blossoming of superlattices from various aspects. These include precise control of size and morphology, enhancement of properties, exploitation of functions, and integration of the material into miniature devices. The effective synthesis of metal-halide perovskite nanocrystals has advanced research on self-assembly of building blocks into micrometer-sized superlattices. More importantly, these materials exhibit abundant optical features, including highly coherent superfluorescence, amplified spontaneous laser emission, and adjustable spectral redshift, facilitating basic research and state-of-the-art applications. This review summarizes recent advances in the field of metal-halide perovskite superlattices. It begins with basic packing models and introduces various stacking configurations of superlattices. The potential of multiple capping ligands is also discussed and their crucial role in superlattice growth is highlighted, followed by detailed reviews of synthesis and characterization methods. How these optical features can be distinguished and present contemporary applications is then considered. This review concludes with a list of unanswered questions and an outlook on their potential use in quantum computing and quantum communications to stimulate further research in this area.
Collapse
Affiliation(s)
- Zhuang Liu
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, China
- Department of Chemistry, National University of Singapore, Singapore, 117543, Singapore
| | - Xian Qin
- Department of Chemistry, National University of Singapore, Singapore, 117543, Singapore
| | - Qihao Chen
- MOE Key Laboratory for Analytical Science of Food Safety and Biology, Fujian Provincial Key Laboratory of Analysis and Detection Technology for Food Safety, College of Chemistry, Fuzhou University, Fuzhou, 350002, China
| | - Tianci Jiang
- MOE Key Laboratory for Analytical Science of Food Safety and Biology, Fujian Provincial Key Laboratory of Analysis and Detection Technology for Food Safety, College of Chemistry, Fuzhou University, Fuzhou, 350002, China
| | - Qiushui Chen
- MOE Key Laboratory for Analytical Science of Food Safety and Biology, Fujian Provincial Key Laboratory of Analysis and Detection Technology for Food Safety, College of Chemistry, Fuzhou University, Fuzhou, 350002, China
| | - Xiaogang Liu
- Joint School of National University of Singapore and Tianjin University, International Campus of Tianjin University, Binhai New City, Fuzhou, 350207, China
- Department of Chemistry, National University of Singapore, Singapore, 117543, Singapore
| |
Collapse
|
20
|
You Q, Gu S, Gou X. The Highly Accurate Interatomic Potential of CsPbBr 3 Perovskite with Temperature Dependence on the Structure and Thermal Properties. MATERIALS (BASEL, SWITZERLAND) 2023; 16:2043. [PMID: 36903156 PMCID: PMC10004010 DOI: 10.3390/ma16052043] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/30/2023] [Revised: 02/23/2023] [Accepted: 02/28/2023] [Indexed: 06/18/2023]
Abstract
CsPbBr3 perovskite has excellent optoelectronic properties and many important application prospects in solar cells, photodetectors, high-energy radiation detectors and other fields. For this kind of perovskite structure, to theoretically predict its macroscopic properties through molecular dynamic (MD) simulations, a highly accurate interatomic potential is first necessary. In this article, a new classical interatomic potential for CsPbBr3 was developed within the framework of the bond-valence (BV) theory. The optimized parameters of the BV model were calculated through first-principle and intelligent optimization algorithms. Calculated lattice parameters and elastic constants for the isobaric-isothermal ensemble (NPT) by our model are in accordance with the experimental data within a reasonable error and have a higher accuracy than the traditional Born-Mayer (BM) model. In our potential model, the temperature dependence of CsPbBr3 structural properties, such as radial distribution functions and interatomic bond lengths, was calculated. Moreover, the temperature-driven phase transition was found, and the phase transition temperature was close to the experimental value. The thermal conductivities of different crystal phases were further calculated, which agreed with the experimental data. All these comparative studies proved that the proposed atomic bond potential is highly accurate, and thus, by using this interatomic potential, the structural stability and mechanical and thermal properties of pure inorganic halide and mixed halide perovskites can be effectively predicted.
Collapse
|
21
|
Boehme S, Bodnarchuk MI, Burian M, Bertolotti F, Cherniukh I, Bernasconi C, Zhu C, Erni R, Amenitsch H, Naumenko D, Andrusiv H, Semkiv N, John RA, Baldwin A, Galkowski K, Masciocchi N, Stranks SD, Rainò G, Guagliardi A, Kovalenko MV. Strongly Confined CsPbBr 3 Quantum Dots as Quantum Emitters and Building Blocks for Rhombic Superlattices. ACS NANO 2023; 17:2089-2100. [PMID: 36719353 PMCID: PMC9933619 DOI: 10.1021/acsnano.2c07677] [Citation(s) in RCA: 18] [Impact Index Per Article: 18.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/02/2022] [Accepted: 01/05/2023] [Indexed: 06/18/2023]
Abstract
The success of the colloidal semiconductor quantum dots (QDs) field is rooted in the precise synthetic control of QD size, shape, and composition, enabling electronically well-defined functional nanomaterials that foster fundamental science and motivate diverse fields of applications. While the exploitation of the strong confinement regime has been driving commercial and scientific interest in InP or CdSe QDs, such a regime has still not been thoroughly explored and exploited for lead-halide perovskite QDs, mainly due to a so far insufficient chemical stability and size monodispersity of perovskite QDs smaller than about 7 nm. Here, we demonstrate chemically stable strongly confined 5 nm CsPbBr3 colloidal QDs via a postsynthetic treatment employing didodecyldimethylammonium bromide ligands. The achieved high size monodispersity (7.5% ± 2.0%) and shape-uniformity enables the self-assembly of QD superlattices with exceptional long-range order, uniform thickness, an unusual rhombic packing with an obtuse angle of 104°, and narrow-band cyan emission. The enhanced chemical stability indicates the promise of strongly confined perovskite QDs for solution-processed single-photon sources, with single QDs showcasing a high single-photon purity of 73% and minimal blinking (78% "on" fraction), both at room temperature.
Collapse
Affiliation(s)
- Simon
C. Boehme
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Maryna I. Bodnarchuk
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Max Burian
- Swiss
Light Source, Paul Scherrer Institute, 5232 Villigen, Switzerland
| | - Federica Bertolotti
- Department
of Science and High Technology and To.Sca.Lab., University of Insubria, via Valleggio 11, 22100 Como, Italy
| | - Ihor Cherniukh
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Caterina Bernasconi
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Chenglian Zhu
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Rolf Erni
- Electron
Microscopy Center, Empa, Swiss
Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Heinz Amenitsch
- Institute
of Inorganic Chemistry, Graz University
of Technology, 8010 Graz, Austria
| | - Denys Naumenko
- Institute
of Inorganic Chemistry, Graz University
of Technology, 8010 Graz, Austria
| | - Hordii Andrusiv
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Nazar Semkiv
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Rohit Abraham John
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Alan Baldwin
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
- Department
of Chemical Engineering & Biotechnology, University of Cambridge, Philippa Fawcett Drive, Cambridge CB3 0AS, U.K.
| | - Krzysztof Galkowski
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
| | - Norberto Masciocchi
- Department
of Science and High Technology and To.Sca.Lab., University of Insubria, via Valleggio 11, 22100 Como, Italy
| | - Samuel D. Stranks
- Cavendish
Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE, U.K.
- Department
of Chemical Engineering & Biotechnology, University of Cambridge, Philippa Fawcett Drive, Cambridge CB3 0AS, U.K.
| | - Gabriele Rainò
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| | - Antonietta Guagliardi
- Istituto
di Cristallografia and To.Sca.Lab, Consiglio
Nazionale delle Ricerche, via Valleggio 11, 22100 Como, Italy
| | - Maksym V. Kovalenko
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, 8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600 Dübendorf, Switzerland
| |
Collapse
|
22
|
Pinheiro A, Ruivo A, Rocha J, Ferro M, Pinto JV, Deuermeier J, Mateus T, Santa A, Mendes MJ, Martins R, Gago S, Laia CAT, Águas H. Parylene-Sealed Perovskite Nanocrystals Down-Shifting Layer for Luminescent Spectral Matching in Thin Film Photovoltaics. NANOMATERIALS (BASEL, SWITZERLAND) 2023; 13:210. [PMID: 36616119 PMCID: PMC9823874 DOI: 10.3390/nano13010210] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/07/2022] [Revised: 12/28/2022] [Accepted: 12/29/2022] [Indexed: 06/17/2023]
Abstract
The present contribution aims to enhance solar cells' performance via the development of advanced luminescent down-shifting based on encapsulated nanostructured perovskite materials. Here, thin films of inorganic lead halide (CsPbBr3) perovskite nanocrystal luminophores were synthetized, by hot-injection, deposited on glass substrates by spin-coating, and encapsulated with parylene type C, via chemical vapor deposition, to protect and stabilize the films. The optical properties of these thin films were characterized by absorption, emission and 2D contour spectra, their structure by X-ray diffraction and X-ray photoelectron spectroscopy, and the morphology by Scanning Transmission Electron microscopy. I-V curve and spectral response nanocrystalline silicon photovoltaic (nc-Si:H PV) cells were studied in the absence and presence of the perovskite and parylene luminescent down-shifting layers. The incorporation of the CsPbBr3 nanocrystals and their encapsulation with the parylene type C polymeric coating led to an increase in the current generated and the spectral response of the PV cells in the regime of the nanocrystals' fluorescence emission. A 3.1% increase in the short circuit current density and a 5.6% increase in the power conversion efficiency were observed.
Collapse
Affiliation(s)
- Ana Pinheiro
- R&D Unit VICARTE—Vidro e Cerâmica para as Artes, NOVA School of Science and Technology, Largo da Torre, 2825-516 Caparica, Portugal
- Associated Laboratory for Green Chemistry (LAQV) of the Network of Chemistry and Technology (REQUIMTE), NOVA School of Sciences and Technology, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Andreia Ruivo
- R&D Unit VICARTE—Vidro e Cerâmica para as Artes, NOVA School of Science and Technology, Largo da Torre, 2825-516 Caparica, Portugal
| | - João Rocha
- Department of Chemistry, CICECO-Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
| | - Marta Ferro
- Department of Materials and Ceramic Engineering, CICECO-Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro, Portugal
| | - Joana Vaz Pinto
- CENIMAT|i3N, NOVA School of Sciences and Technology and CEMOP/UNINOVA, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Jonas Deuermeier
- CENIMAT|i3N, NOVA School of Sciences and Technology and CEMOP/UNINOVA, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Tiago Mateus
- CENIMAT|i3N, NOVA School of Sciences and Technology and CEMOP/UNINOVA, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Ana Santa
- CENIMAT|i3N, NOVA School of Sciences and Technology and CEMOP/UNINOVA, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Manuel J. Mendes
- CENIMAT|i3N, NOVA School of Sciences and Technology and CEMOP/UNINOVA, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Rodrigo Martins
- CENIMAT|i3N, NOVA School of Sciences and Technology and CEMOP/UNINOVA, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Sandra Gago
- Associated Laboratory for Green Chemistry (LAQV) of the Network of Chemistry and Technology (REQUIMTE), NOVA School of Sciences and Technology, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - César A. T. Laia
- Associated Laboratory for Green Chemistry (LAQV) of the Network of Chemistry and Technology (REQUIMTE), NOVA School of Sciences and Technology, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| | - Hugo Águas
- CENIMAT|i3N, NOVA School of Sciences and Technology and CEMOP/UNINOVA, FCT NOVA, Largo da Torre, 2825-516 Caparica, Portugal
| |
Collapse
|
23
|
Geng T, Shi Y, Liu Z, Zhao D, Ma Z, Wang K, Dong Q, Xiao G, Zou B. Pressure-Induced Emission from All-Inorganic Two-Dimensional Vacancy-Ordered Lead-Free Metal Halide Perovskite Nanocrystals. J Phys Chem Lett 2022; 13:11837-11843. [PMID: 36520022 DOI: 10.1021/acs.jpclett.2c03332] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Although seeking an effective strategy for further improving their optical properties is a great challenge, two-dimensional (2D) halide perovskites have attracted a significant amount of attention because of their performance. In this regard, the pressure-induced emission accompanied by a remarkable pressure-enhanced emission is achieved without a phase transition in 2D vacancy-ordered perovskite Cs3Bi2Cl9 nanocrystals (NCs). Note that the initial Cs3Bi2Cl9 NCs possess extremely strong electron-phonon coupling, leading to the easy annihilation of trapped excitons by the phonon. Upon compression, pressure could effectively suppress phonon-assisted nonradiative decay and give rise to an intriguing emission from "0" to "1". Both the weakened electron-phonon coupling and the relaxed halide octahedral distortion benefiting from the vacancy-ordered structure contributed to the subsequent enhanced emission. This work not only elucidates the underlying photophysical mechanism but also identifies pressure engineering as a robust means for improving their potential applications in environmentally friendly solid-state lighting at extremes.
Collapse
Affiliation(s)
- Ting Geng
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Yue Shi
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Zhun Liu
- Department of Physics, Shaoxing University, Shaoxing 312000, China
| | - Dianlong Zhao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Zhiwei Ma
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Kai Wang
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Qingfeng Dong
- State Key Laboratory of Supermolecular Structure and Materials, College of Chemistry, Jilin University, Changchun 130012, China
| | - Guanjun Xiao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Bo Zou
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| |
Collapse
|
24
|
Li X, Xue Z, Chen X, Qiao X, Mo G, Bu W, Guan B, Wang T. Printable assemblies of perovskite nanocubes on meter-scale panel. SCIENCE ADVANCES 2022; 8:eadd1559. [PMID: 36367933 PMCID: PMC9651854 DOI: 10.1126/sciadv.add1559] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/25/2022] [Accepted: 09/26/2022] [Indexed: 06/16/2023]
Abstract
Hierarchical assemblies of functional nanoparticles can have applications exceeding those of individual constituents. Arranging components in a certain order, even at the atomic scale, can result in emergent effects. We demonstrate that printed atomic ordering is achieved in multiscale hierarchical structures, including nanoparticles, superlattices, and macroarrays. The CsPbBr3 perovskite nanocubes self-assemble into superlattices in ordered arrays controlled across 10 scales. These structures behave as single nanoparticles, with diffraction patterns similar to those of single crystals. The assemblies repeat as two-dimensional planar unit cells, forming crystalline superlattice arrays. The fluorescence intensity of these arrays is 5.2 times higher than those of random aggregate arrays. The multiscale coherent states can be printed on a meter-scale panel as a micropixel light-producing layer of primary-color photon emitters. These hierarchical assemblies can boost the performance of optoelectronic devices and enable the development of high-efficiency, directional quantum light sources.
Collapse
Affiliation(s)
- Xiao Li
- Life and Health Intelligent Research Institute, School of Chemistry and Chemical Engineering, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Zhenjie Xue
- Life and Health Intelligent Research Institute, School of Chemistry and Chemical Engineering, Tianjin University of Technology, Tianjin 300384, P. R. China
| | - Xiangyu Chen
- Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China
| | - Xuezhi Qiao
- Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China
| | - Guang Mo
- Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, P. R. China
| | - Wensheng Bu
- Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China
| | - Bo Guan
- Beijing National Laboratory for Molecular Sciences, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, P. R. China
| | - Tie Wang
- Life and Health Intelligent Research Institute, School of Chemistry and Chemical Engineering, Tianjin University of Technology, Tianjin 300384, P. R. China
| |
Collapse
|
25
|
Progress in all-inorganic heterometallic halide layered double perovskites. TRENDS IN CHEMISTRY 2022. [DOI: 10.1016/j.trechm.2022.10.008] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
|
26
|
Yi S, Lee JH. Degenerate Lattice-Instability-Driven Amorphization under Compression in Metal Halide Perovskite CsPbI 3. J Phys Chem Lett 2022; 13:9449-9455. [PMID: 36194863 DOI: 10.1021/acs.jpclett.2c02047] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Halide perovskites have been intensively investigated for photovoltaic applications because of their good optoelectronic properties and low cost. Various high-pressure experiments have shown that these materials generally undergo reversible phase transitions between different crystalline phases as well as between crystalline and amorphous phases under external pressure. Herein, using first-principles density functional theory (DFT) and ab initio molecular dynamics (AIMD) calculations, we investigate the origin of the pressure-induced amorphization in CsPbI3. We find that the amorphous-like structures obtained from AIMD calculations become more stable than the orthorhombic Pbnm phase above 6.66 GPa, in good agreement with the experimental value (4.44 GPa). We further find that an imaginary flat band appears in the phonon dispersion of the orthorhombic CsPbI3 phase across the Brillouin zone at 10 GPa, leading to degenerate lattice instabilities. These energetically degenerate phonon modes are related to PbI6 octahedral tilting modes and provide random local distortions, leading to amorphization.
Collapse
Affiliation(s)
- Seho Yi
- Computational Science Research Center, Korea Institute of Science and Technology, Seoul 02792, Republic of Korea
| | - Jung-Hoon Lee
- Computational Science Research Center, Korea Institute of Science and Technology, Seoul 02792, Republic of Korea
| |
Collapse
|
27
|
Du L, Shi X, Duan M, Shi Y. Pressure-Induced Tunable Charge Carrier Dynamics in Mn-Doped CsPbBr 3 Perovskite. MATERIALS (BASEL, SWITZERLAND) 2022; 15:6984. [PMID: 36234324 PMCID: PMC9571311 DOI: 10.3390/ma15196984] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Revised: 09/22/2022] [Accepted: 09/28/2022] [Indexed: 06/16/2023]
Abstract
All-inorganic perovskite materials (CsPbX3) have attracted increasing attention due to their excellent photoelectric properties and stable physical and chemical properties. The dynamics of charge carriers affect the photoelectric conversion efficiencies of perovskite materials. Regulating carrier dynamics by changing pressure is interesting with respect to revealing the key microphysical processes involved. Here, ultrafast spectroscopy combined with high-pressure diamond anvil cell technology was used to study the generation and transfer of photoinduced carriers of a Mn-doped inorganic perovskite CsPbBr3 material under pressure. Three components were obtained and assigned to thermal carrier relaxation, optical phonon-acoustic phonon scattering and Auger recombination. The time constants of the three components changed under the applied pressures. Our experimental results show that pressure can affect the crystal structure of Mn-doped CsPbBr3 to regulate carrier dynamics. The use of metal doping not only reduces the content of toxic substances but also improves the photoelectric properties of perovskite materials. We hope that our study can provide dynamic experimental support for the exploration of new photoelectric materials.
Collapse
Affiliation(s)
- Luchao Du
- Correspondence: (L.D.); (Y.S.); Tel.: +86-17767769265 (L.D.)
| | | | | | - Ying Shi
- Correspondence: (L.D.); (Y.S.); Tel.: +86-17767769265 (L.D.)
| |
Collapse
|
28
|
Wang Y, Zhao H, Piotrowski M, Han X, Ge Z, Dong L, Wang C, Pinisetty SK, Balguri PK, Bandela AK, Thumu U. Cesium Lead Iodide Perovskites: Optically Active Crystal Phase Stability to Surface Engineering. MICROMACHINES 2022; 13:mi13081318. [PMID: 36014240 PMCID: PMC9414704 DOI: 10.3390/mi13081318] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/20/2022] [Revised: 08/07/2022] [Accepted: 08/10/2022] [Indexed: 05/04/2023]
Abstract
Among perovskites, the research on cesium lead iodides (CsPbI3) has attracted a large research community, owing to their all-inorganic nature and promising solar cell performance. Typically, the CsPbI3 solar cell devices are prepared at various heterojunctions, and working at fluctuating temperatures raises questions on the material stability-related performance of such devices. The fundamental studies reveal that their poor stability is due to a lower side deviation from Goldschmidt's tolerance factor, causing weak chemical interactions within the crystal lattice. In the case of organic-inorganic hybrid perovskites, where their stability is related to the inherent chemical nature of the organic cations, which cannot be manipulated to improve the stability drastically whereas the stability of CsPbI3 is related to surface and lattice engineering. Thus, the challenges posed by CsPbI3 could be overcome by engineering the surface and inside the CsPbI3 crystal lattice. A few solutions have been proposed, including controlled crystal sizes, surface modifications, and lattice engineering. Various research groups have been working on these aspects and had accumulated a rich understanding of these materials. In this review, at first, we survey the fundamental aspects of CsPbI3 polymorphs structure, highlighting the superiority of CsPbI3 over other halide systems, stability, the factors (temperature, polarity, and size influence) leading to their phase transformations, and electronic band structure along with the important property of the defect tolerance nature. Fortunately, the factors stabilizing the most effective phases are achieved through a size reduction and the efficient surface passivation on the delicate CsPbI3 nanocrystal surfaces. In the following section, we have provided the up-to-date surface passivating methods to suppress the non-radiative process for near-unity photoluminescence quantum yield, while maintaining their optically active phases, especially through molecular links (ligands, polymers, zwitterions, polymers) and inorganic halides. We have also provided recent advances to the efficient synthetic protocols for optically active CsPbI3 NC phases to use readily for solar cell applications. The nanocrystal purification techniques are challenging and had a significant effect on the device performances. In part, we summarized the CsPbI3-related solar cell device performances with respect to the device fabrication methods. At the end, we provide a brief outlook on the view of surface and lattice engineering in CsPbI3 NCs for advancing the enhanced stability which is crucial for superior optical and light applications.
Collapse
Affiliation(s)
- Yixi Wang
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Hairong Zhao
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Marek Piotrowski
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Xiao Han
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Zhongsheng Ge
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Lizhuang Dong
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Chengjie Wang
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Sowjanya Krishna Pinisetty
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
| | - Praveen Kumar Balguri
- Department of Aeronautical Engineering, Institute of Aeronautical Engineering, Hyderabad 500043, India
| | - Anil Kumar Bandela
- Department of Chemistry, Ben Gurion University of the Negev, Beer Sheva 84105, Israel
- Correspondence: (A.K.B.); (U.T.)
| | - Udayabhaskararao Thumu
- Institute of Fundamental and Frontier Sciences, University of Electronic Science and Technology of China, Chengdu 610054, China
- Correspondence: (A.K.B.); (U.T.)
| |
Collapse
|
29
|
Liu H, Wang Y, Yang X, Zhao X, Wang K, Wu M, Zuo X, Yang W, Sui Y, Zou B. Pressure-stimulus-responsive behaviors of core-shell InP/ZnSe nanocrystals: remarkable piezochromic luminescence and structural assembly. NANOSCALE 2022; 14:7530-7537. [PMID: 35481922 DOI: 10.1039/d2nr00281g] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Piezochromic luminescence materials with optical properties can be adjusted (the colors most sensitive to the human eye range from red to green) to provide powerful means for information acquisition in various applications. Inorganic quantum dots, typically based on heavy metals such as cadmium and lead, have congenital advantages as luminescence materials, including strong inoxidizability and excellent photoelectric properties. However, small band-gap shifts under pressure have hindered the development of inorganic-based piezochromic materials. Herein, we combined in situ high-pressure photoluminescence (PL) and absorption measurements with synchrotron X-ray scattering spectra to elucidate the remarkable modulation of optical properties and morphologies by pressure, particularly that of the piezochromic luminescence, in all-inorganic core-shell InP/ZnSe nanocrystals (NCs). We observed a stepwise PL color change from red to green, and an ultrabroad bandgap tunability of 0.46 eV was observed from 1.99 to 2.45 eV in the pressure range of 14.2 GPa for InP/ZnSe NCs. Moreover, two-dimensional (2D) InP/ZnSe nanosheets were synthesized by the stress-driven attachment of nanoparticles. These results demonstrate the ability of the pressure-stimulus response to trigger remarkable piezochromic luminescence and 2D nanosheet assembly in InP/ZnSe NCs, which paves the way for new applications of all-inorganic InP-based semiconductor NCs.
Collapse
Affiliation(s)
- Hao Liu
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
- School of Physics and Electronic Engineering, Xinxiang University, Xinxiang 453003, China
| | - Yixuan Wang
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
| | - Xinyi Yang
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
| | - Xiaohui Zhao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
| | - Kai Wang
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
| | - Min Wu
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
| | - Xiaobing Zuo
- X-ray Science Division, Advanced Photon Source, Argonne National Laboratory, Lemont, IL 60439, USA
| | - Wenge Yang
- Center for High-Pressure Science and Technology Advanced Research, Beijing 100094, China
| | - Yongming Sui
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
| | - Bo Zou
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China.
| |
Collapse
|
30
|
Cherniukh I, Sekh TV, Rainò G, Ashton OJ, Burian M, Travesset A, Athanasiou M, Manoli A, John RA, Svyrydenko M, Morad V, Shynkarenko Y, Montanarella F, Naumenko D, Amenitsch H, Itskos G, Mahrt RF, Stöferle T, Erni R, Kovalenko MV, Bodnarchuk MI. Structural Diversity in Multicomponent Nanocrystal Superlattices Comprising Lead Halide Perovskite Nanocubes. ACS NANO 2022; 16:7210-7232. [PMID: 35385663 PMCID: PMC9134504 DOI: 10.1021/acsnano.1c10702] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
Nanocrystal (NC) self-assembly is a versatile platform for materials engineering at the mesoscale. The NC shape anisotropy leads to structures not observed with spherical NCs. This work presents a broad structural diversity in multicomponent, long-range ordered superlattices (SLs) comprising highly luminescent cubic CsPbBr3 NCs (and FAPbBr3 NCs) coassembled with the spherical, truncated cuboid, and disk-shaped NC building blocks. CsPbBr3 nanocubes combined with Fe3O4 or NaGdF4 spheres and truncated cuboid PbS NCs form binary SLs of six structure types with high packing density; namely, AB2, quasi-ternary ABO3, and ABO6 types as well as previously known NaCl, AlB2, and CuAu types. In these structures, nanocubes preserve orientational coherence. Combining nanocubes with large and thick NaGdF4 nanodisks results in the orthorhombic SL resembling CaC2 structure with pairs of CsPbBr3 NCs on one lattice site. Also, we implement two substrate-free methods of SL formation. Oil-in-oil templated assembly results in the formation of binary supraparticles. Self-assembly at the liquid-air interface from the drying solution cast over the glyceryl triacetate as subphase yields extended thin films of SLs. Collective electronic states arise at low temperatures from the dense, periodic packing of NCs, observed as sharp red-shifted bands at 6 K in the photoluminescence and absorption spectra and persisting up to 200 K.
Collapse
Affiliation(s)
- Ihor Cherniukh
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Taras V. Sekh
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Gabriele Rainò
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Olivia J. Ashton
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Max Burian
- Swiss
Light
Source, Paul Scherrer Institute, 5232 Villigen PSI, Switzerland
| | - Alex Travesset
- Department
of Physics and Astronomy and Ames Laboratory, Iowa State University, Ames, Iowa 50011, United States
| | - Modestos Athanasiou
- Experimental
Condensed Matter Physics Laboratory, Department of Physics, University of Cyprus, 1678 Nicosia, Cyprus
| | - Andreas Manoli
- Experimental
Condensed Matter Physics Laboratory, Department of Physics, University of Cyprus, 1678 Nicosia, Cyprus
| | - Rohit Abraham John
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Mariia Svyrydenko
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Viktoriia Morad
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Yevhen Shynkarenko
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Federico Montanarella
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Denys Naumenko
- Institute
of Inorganic Chemistry, Graz University
of Technology, 8010 Graz, Austria
| | - Heinz Amenitsch
- Institute
of Inorganic Chemistry, Graz University
of Technology, 8010 Graz, Austria
| | - Grigorios Itskos
- Experimental
Condensed Matter Physics Laboratory, Department of Physics, University of Cyprus, 1678 Nicosia, Cyprus
| | | | - Thilo Stöferle
- IBM
Research Europe−Zurich, CH-8803 Rüschlikon, Switzerland
| | - Rolf Erni
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Maksym V. Kovalenko
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| | - Maryna I. Bodnarchuk
- Institute
of Inorganic Chemistry, Department of Chemistry and Applied Biosciences, ETH Zürich, CH-8093 Zürich, Switzerland
- Laboratory for Thin Films and Photovoltaics and Electron Microscopy
Center, Empa−Swiss Federal Laboratories
for Materials
Science and Technology, CH-8600 Dübendorf, Switzerland
| |
Collapse
|
31
|
Fan X, Walther A. 1D Colloidal chains: recent progress from formation to emergent properties and applications. Chem Soc Rev 2022; 51:4023-4074. [PMID: 35502721 DOI: 10.1039/d2cs00112h] [Citation(s) in RCA: 10] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Integrating nanoscale building blocks of low dimensionality (0D; i.e., spheres) into higher dimensional structures endows them and their corresponding materials with emergent properties non-existent or only weakly existent in the individual building blocks. Constructing 1D chains, 2D arrays and 3D superlattices using nanoparticles and colloids therefore continues to be one of the grand goals in colloid and nanomaterial science. Amongst these higher order structures, 1D colloidal chains are of particular interest, as they possess unique anisotropic properties. In recent years, the most relevant advances in 1D colloidal chain research have been made in novel synthetic methodologies and applications. In this review, we first address a comprehensive description of the research progress concerning various synthetic strategies developed to construct 1D colloidal chains. Following this, we highlight the amplified and emergent properties of the resulting materials, originating from the assembly of the individual building blocks and their collective behavior, and discuss relevant applications in advanced materials. In the discussion of synthetic strategies, properties, and applications, particular attention will be paid to overarching concepts, fresh trends, and potential areas of future research. We believe that this comprehensive review will be a driver to guide the interdisciplinary field of 1D colloidal chains, where nanomaterial synthesis, self-assembly, physical property studies, and material applications meet, to a higher level, and open up new research opportunities at the interface of classical disciplines.
Collapse
Affiliation(s)
- Xinlong Fan
- Institute for Macromolecular Chemistry, Albert-Ludwigs-University Freiburg, Stefan-Meier-Str. 31, 79104, Freiburg, Germany.
| | - Andreas Walther
- A3BMS Lab, Department of Chemistry, University of Mainz, Duesbergweg 10-14, 55128 Mainz, Germany.
| |
Collapse
|
32
|
Tang X, Zhang Y, Kothalawala NL, Wen X, Kim DY, Yang F. MAPbBr 3nanocrystals from aqueous solution for poly(methyl methacrylate)-MAPbBr 3nanocrystal films with compression-resistant photoluminescence. NANOTECHNOLOGY 2022; 33:235605. [PMID: 35235922 DOI: 10.1088/1361-6528/ac59e8] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2021] [Accepted: 02/28/2022] [Indexed: 06/14/2023]
Abstract
In this work, we develop an environmental-friendly approach to produce organic-inorganic hybrid MAPbBr3(MA = CH3NH3) perovskite nanocrystals (PeNCs) and PMMA-MAPbBr3NC films with excellent compression-resistant PL characteristics. Deionized water is used as the solvent to synthesize MAPbBr3powder instead of conventionally-used hazardous organic solvents. The MAPbBr3PeNCs derived from the MAPbBr3powder exhibit a high photoluminescence quantum yield (PLQY) of 93.86%. Poly(methyl methacrylate) (PMMA)-MAPbBr3NC films made from the MAPbBr3PeNCs retain ∼97% and ∼91% of initial PL intensity after 720 h aging in ambient environment at 50 °C and 70 °C, respectively. The PMMA-MAPbBr3NC films also exhibit compression-resistant photoluminescent characteristics in contrast to the PMMA-CsPbBr3NC films under a compressive stress of 1.6 MPa. The PMMA-MAPbBr3NC film integrated with a red emissive film and a blue light emitting source achieves an LCD backlight of ∼114% color gamut of National Television System Committee (NTSC) 1953 standard.
Collapse
Affiliation(s)
- Xiaobing Tang
- Materials Program, Department of Chemical and Materials Engineering, University of Kentucky, Lexington, KY 40506, United States of America
| | - Yulin Zhang
- Materials Program, Department of Chemical and Materials Engineering, University of Kentucky, Lexington, KY 40506, United States of America
| | | | - Xiyu Wen
- Center for Aluminum Technology, University of Kentucky, Lexington, KY 40506, United States of America
| | - Doo Young Kim
- Department of Chemistry, University of Kentucky, Lexington, KY 40506, United States of America
| | - Fuqian Yang
- Materials Program, Department of Chemical and Materials Engineering, University of Kentucky, Lexington, KY 40506, United States of America
| |
Collapse
|
33
|
Lv Q, Wang C, Chen S, Zheng H, Dong E, Zhu G. Ultrasensitive Pressure-Induced Optical Materials: Europium-Doped Hafnium Silicates with a Khibinskite Structure for Optical Pressure Sensors and WLEDs. Inorg Chem 2022; 61:3212-3222. [PMID: 35142209 DOI: 10.1021/acs.inorgchem.1c03674] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023]
Abstract
Ultrasensitive pressure-induced optical materials are of great importance owing to their potential applications in optical pressure sensors. However, the lack of outstanding pressure sensitivity, observable color evolution, and structure reliability limits their further development in both practical applications and luminescence theory. To overcome the above problems, an enlightening methodology is proposed to explore the high sensitivity and phase stability of hafnium silicate K2HfSi2O7 (KHSO) phosphor with a Khibinskite structure. By employing X-ray diffraction (XRD) Rietveld refinement, cryogenic spectroscopy, and ancillary calculations, information on Eu2+ ion occupation is completely obtained at atmospheric pressure. The remarkable pressure sensitivity (dλ/dP = 3.25 nm/GPa-1) and excellent phase stability up to 20 GPa, along with the reproducible color hue variation, exhibit unprecedented superiority when used in optical pressure sensors. These advantages can be assigned to the pressure-induced Eu2+-selective occupation and the unique properties of 5d-4f transition (Stokes shift, nephelauxetic effect, and intense crystal field strength), which are clearly proved by measuring the XRD patterns, Raman spectra, and Gaussian fitting spectra under compression and decompression processes. The excellent luminescence property manifests that KHSO/Eu2+ can be considered as a potential luminescent material for solid-state lighting and optical pressure sensors.
Collapse
Affiliation(s)
- Qingyi Lv
- College of Chemistry and Materials Engineering, Bohai University, Jinzhou 121000, P. R. China
| | - Chuang Wang
- College of Chemistry and Materials Engineering, Bohai University, Jinzhou 121000, P. R. China
| | - Shuanglong Chen
- College of Chemistry and Materials Engineering, Bohai University, Jinzhou 121000, P. R. China
| | - Huiling Zheng
- College of Chemistry and Materials Engineering, Bohai University, Jinzhou 121000, P. R. China
| | - Enlai Dong
- College of Chemistry and Materials Engineering, Bohai University, Jinzhou 121000, P. R. China.,State Key Lab Superhard Mat, Jilin University, 2699 Qianjin Street, Changchun 130012, P. R China
| | - Ge Zhu
- College of Chemistry and Materials Engineering, Bohai University, Jinzhou 121000, P. R. China.,Key Laboratory of New Energy and Rare Earth Resource Utilization of State Ethnic Affairs Commission, College of Physics and Materials Engineering, Dalian Minzu University, 18 Liaohe West Road, Dalian 116600, P. R. China
| |
Collapse
|
34
|
Liu J, Zheng X, Mohammed OF, Bakr OM. Self-Assembly and Regrowth of Metal Halide Perovskite Nanocrystals for Optoelectronic Applications. Acc Chem Res 2022; 55:262-274. [PMID: 35037453 PMCID: PMC8811956 DOI: 10.1021/acs.accounts.1c00651] [Citation(s) in RCA: 20] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
![]()
Over the past decade, the impressive development
of metal halide
perovskites (MHPs) has made them leading candidates for applications
in photovoltaics (PVs), X-ray scintillators, and light-emitting diodes
(LEDs). Constructing MHP nanocrystals (NCs) with promising optoelectronic
properties using a low-cost approach is critical to realizing their
commercial potential. Self-assembly and regrowth techniques provide
a simple and powerful “bottom-up” platform for controlling
the structure, shape, and dimensionality of MHP NCs. The soft ionic
nature of MHP NCs, in conjunction with their low formation energy,
rapid anion exchange, and ease of ion migration, enables the rearrangement
of their overall appearance via self-assembly or regrowth. Because
of their low formation energy and highly dynamic surface ligands,
MHP NCs have a higher propensity to regrow than conventional hard-lattice
NCs. Moreover, their self-assembly and regrowth can be achieved simultaneously.
The self-assembly of NCs into close-packed, long-range-ordered mesostructures
provides a platform for modulating their electronic properties (e.g.,
conductivity and carrier mobility). Moreover, assembled MHP NCs exhibit
collective properties (e.g., superfluorescence, renormalized emission,
longer phase coherence times, and long exciton diffusion lengths)
that can translate into dramatic improvements in device performance.
Further regrowth into fused MHP nanostructures with the removal of
ligand barriers between NCs could facilitate charge carrier transport,
eliminate surface point defects, and enhance stability against moisture,
light, and electron-beam irradiation. However, the synthesis strategies,
diversity and complexity of structures, and optoelectronic applications
that emanate from the self-assembly and regrowth of MHPs have not
yet received much attention. Consequently, a comprehensive understanding
of the design principles of self-assembled and fused MHP nanostructures
will fuel further advances in their optoelectronic applications. In this Account, we review the latest developments in the self-assembly
and regrowth of MHP NCs. We begin with a survey of the mechanisms,
driving forces, and techniques for controlling MHP NC self-assembly.
We then explore the phase transition of fused MHP nanostructures at
the atomic level, delving into the mechanisms of facet-directed connections
and the kinetics of their shape-modulation behavior, which have been
elucidated with the aid of high-resolution transmission electron microscopy
(HRTEM) and first-principles density functional theory calculations
of surface energies. We further outline the applications of assembled
and fused nanostructures. Finally, we conclude with a perspective
on current challenges and future directions in the field of MHP NCs.
Collapse
Affiliation(s)
- Jiakai Liu
- Division of Physical Sciences and Engineering, KAUST Catalysis Center (KCC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia
- College of New Materials and New Energies, Shenzhen Technology University, Shenzhen 518118, China
| | - Xiaopeng Zheng
- Division of Physical Sciences and Engineering, KAUST Catalysis Center (KCC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Omar F. Mohammed
- Division of Physical Sciences and Engineering, KAUST Catalysis Center (KCC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Osman M. Bakr
- Division of Physical Sciences and Engineering, KAUST Catalysis Center (KCC), King Abdullah University of Science and Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia
| |
Collapse
|
35
|
Ha Y, Park JG, Hong KH, Kim H. Enhanced Light Emission through Symmetry Engineering of Halide Perovskites. J Am Chem Soc 2021; 144:297-305. [PMID: 34958207 DOI: 10.1021/jacs.1c09891] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
Metal-halide perovskites (MHPs) have attracted tremendous attention as active materials in optoelectronic devices. For light-emitting diode (LED) applications, nanostructuring of MHPs is considered to be inevitable, but its light-enhancement mechanism is still elusive because the particle (or grain) size is often beyond the quantum confinement regime. As motivated by the experimental finding that the nanostructuring can change the preferred crystalline symmetry from the orthorhombic phase to the high-symmetric cubic phase, we here investigated the carrier dynamics in various polymorphic phases of CsPbBr3 using ab initio quantum dynamics simulation. We found that the cubic phase shows a smaller inelastic phonon scattering than the orthorhombic phase; the suppression of the octahedral tilt minimizes the longitudinal Br fluctuation and helps disentangle the A-site cation dynamics from the nonadiabatic carrier dynamics. We thus anticipate that our present work will offer a material design principle to enhance the quantum yield of MHPs via symmetry engineering, which will help develop highly luminescent LED technology based on MHPs.
Collapse
Affiliation(s)
- Yoonhoo Ha
- Department of Chemistry, Korea Advanced Institute of Science and Technology, Daejeon 34141, Republic of Korea
| | - Jong-Goo Park
- Department of Materials Science and Engineering, Hanbat National University, Daejeon 34158, Republic of Korea
| | - Ki-Ha Hong
- Department of Materials Science and Engineering, Hanbat National University, Daejeon 34158, Republic of Korea
| | - Hyungjun Kim
- Department of Chemistry, Korea Advanced Institute of Science and Technology, Daejeon 34141, Republic of Korea
| |
Collapse
|
36
|
Shi Y, Zhao W, Ma Z, Xiao G, Zou B. Self-trapped exciton emission and piezochromism in conventional 3D lead bromide perovskite nanocrystals under high pressure. Chem Sci 2021; 12:14711-14717. [PMID: 34820086 PMCID: PMC8597834 DOI: 10.1039/d1sc04987a] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/09/2021] [Accepted: 10/20/2021] [Indexed: 11/21/2022] Open
Abstract
Developing single-component materials with bright-white emission is required for energy-saving applications. Self-trapped exciton (STE) emission is regarded as a robust way to generate intrinsic white light in halide perovskites. However, STE emission usually occurs in low-dimensional perovskites whereby a lower level of structural connectivity reduces the conductivity. Enabling conventional three-dimensional (3D) perovskites to produce STEs to elicit competitive white emission is challenging. Here, we first achieved STEs-related emission of white light with outstanding chromaticity coordinates of (0.330, 0.325) in typical 3D perovskites, Mn-doped CsPbBr3 nanocrystals (NCs), through pressure processing. Remarkable piezochromism from red to blue was also realized in compressed Mn-doped CsPbBr3 NCs. Doping engineering by size-mismatched Mn dopants could give rise to the formation of localized carriers. Hence, high pressure could further induce octahedra distortion to accommodate the STEs, which has never occurred in pure 3D perovskites. Our study not only offers deep insights into the photophysical nature of perovskites, it also provides a promising strategy towards high-quality, stable white-light emission.
Collapse
Affiliation(s)
- Yue Shi
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University Changchun 130012 China
| | - Wenya Zhao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University Changchun 130012 China
| | - Zhiwei Ma
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University Changchun 130012 China
| | - Guanjun Xiao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University Changchun 130012 China
| | - Bo Zou
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University Changchun 130012 China
| |
Collapse
|
37
|
Dutta SK, Bera S, Behera RK, Hudait B, Pradhan N. Cs-Lattice Extension and Expansion for Inducing Secondary Growth of CsPbBr 3 Perovskite Nanocrystals. ACS NANO 2021; 15:16183-16193. [PMID: 34636535 DOI: 10.1021/acsnano.1c05053] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The increase of the stability of perovskite nanocrystals with respect to exposure to polar media, layers growth, or shelling with different materials is in demand. While these are widely studied for metal chalcogenide nanocrystals, it has yet to be explored for perovskite nanocrystals. Even growth of a single monolayer on any facet or on the entire surface of these nanocrystals could not be established yet. To address this, herein, a secondary growth approach leading to creation of a secondary lattice with subsequent expansion on preformed CsPbBr3 perovskite nanocrystals is reported. As direct layer growth by adding precursors was not successful, Cs-lattice extension to preformed CsPbBr3 nanocrystals was performed by coupling CsBr to these nanocrystals. Opening both {110}/{002} and {200} facets of parent CsPbBr3 nanocrystals, CsBr was observed to be connected with lattice matching to the {200} facets. Further with Pb(II) incorporation, the Cs-sublattices of CsBr were expanded to CsPbBr3 and led to cube-couple nanocrystals. However, as cubes in these nanostructures were differently oriented, these showed lattice mismatch at their junctions. This lattice mismatch though restricted complete shelling but successfully favored the secondary growth on specific facets of parent CsPbBr3 nanocrystals. Details of this secondary growth via lattice extension and expansion are microscopically analyzed and reported. These results further suggest that lead halide perovskite nanocrystals can be epitaxially grown under proper reaction design and more complex as well as heterostructures of these materials can be fabricated to meet the current demands.
Collapse
Affiliation(s)
- Sumit Kumar Dutta
- School of Materials Sciences, Indian Association for the Cultivation of Sciences, Kolkata 700032, India
| | - Suman Bera
- School of Materials Sciences, Indian Association for the Cultivation of Sciences, Kolkata 700032, India
| | - Rakesh Kumar Behera
- School of Materials Sciences, Indian Association for the Cultivation of Sciences, Kolkata 700032, India
| | - Biswajit Hudait
- School of Materials Sciences, Indian Association for the Cultivation of Sciences, Kolkata 700032, India
| | - Narayan Pradhan
- School of Materials Sciences, Indian Association for the Cultivation of Sciences, Kolkata 700032, India
| |
Collapse
|
38
|
Xiang G, Wu Y, Zhang M, Cheng C, Leng J, Ma H. Dimension-Dependent Bandgap Narrowing and Metallization in Lead-Free Halide Perovskite Cs 3Bi 2X 9 (X = I, Br, and Cl) under High Pressure. NANOMATERIALS (BASEL, SWITZERLAND) 2021; 11:2712. [PMID: 34685153 PMCID: PMC8539073 DOI: 10.3390/nano11102712] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/26/2021] [Revised: 10/09/2021] [Accepted: 10/12/2021] [Indexed: 11/16/2022]
Abstract
Low-toxicity, air-stable cesium bismuth iodide Cs3Bi2X9 (X = I, Br, and Cl) perovskites are gaining substantial attention owing to their excellent potential in photoelectric and photovoltaic applications. In this work, the lattice constants, band structures, density of states, and optical properties of the Cs3Bi2X9 under high pressure perovskites are theoretically studied using the density functional theory. The calculated results show that the changes in the bandgap of the zero-dimensional Cs3Bi2I9, one-dimensional Cs3Bi2Cl9, and two-dimensional Cs3Bi2Br9 perovskites are 3.05, 1.95, and 2.39 eV under a pressure change from 0 to 40 GPa, respectively. Furthermore, it was found that the optimal bandgaps of the Shockley-Queisser theory for the Cs3Bi2I9, Cs3Bi2Br9, and Cs3Bi2Cl9 perovskites can be reached at 2-3, 21-26, and 25-29 GPa, respectively. The Cs3Bi2I9 perovskite was found to transform from a semiconductor into a metal at a pressure of 17.3 GPa. The lattice constants, unit-cell volume, and bandgaps of the Cs3Bi2X9 perovskites exhibit a strong dependence on dimension. Additionally, the Cs3Bi2X9 perovskites have large absorption coefficients in the visible region, and their absorption coefficients undergo a redshift with increasing pressure. The theoretical calculation results obtained in this work strengthen the fundamental understanding of the structures and bandgaps of Cs3Bi2X9 perovskites at high pressures, providing a theoretical support for the design of materials under high pressure.
Collapse
Affiliation(s)
- Guangbiao Xiang
- Shandong Provincial Key Laboratory of Optics and Photonic Device, Collaborative Innovation Center of Light Manipulations and Applications, School of Physics and Electronics, Shandong Normal University, Jinan 250014, China; (G.X.); (Y.W.); (M.Z.)
| | - Yanwen Wu
- Shandong Provincial Key Laboratory of Optics and Photonic Device, Collaborative Innovation Center of Light Manipulations and Applications, School of Physics and Electronics, Shandong Normal University, Jinan 250014, China; (G.X.); (Y.W.); (M.Z.)
| | - Man Zhang
- Shandong Provincial Key Laboratory of Optics and Photonic Device, Collaborative Innovation Center of Light Manipulations and Applications, School of Physics and Electronics, Shandong Normal University, Jinan 250014, China; (G.X.); (Y.W.); (M.Z.)
| | - Chen Cheng
- Shandong Provincial Key Laboratory of Optics and Photonic Device, Collaborative Innovation Center of Light Manipulations and Applications, School of Physics and Electronics, Shandong Normal University, Jinan 250014, China; (G.X.); (Y.W.); (M.Z.)
| | - Jiancai Leng
- School of Electronic and Information Engineering (Department of Physics), Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China
| | - Hong Ma
- Shandong Provincial Key Laboratory of Optics and Photonic Device, Collaborative Innovation Center of Light Manipulations and Applications, School of Physics and Electronics, Shandong Normal University, Jinan 250014, China; (G.X.); (Y.W.); (M.Z.)
| |
Collapse
|
39
|
Ma Z, Li Q, Luo J, Li S, Sui L, Zhao D, Yuan K, Xiao G, Tang J, Quan Z, Zou B. Pressure-Driven Reverse Intersystem Crossing: New Path toward Bright Deep-Blue Emission of Lead-Free Halide Double Perovskites. J Am Chem Soc 2021; 143:15176-15184. [PMID: 34506135 DOI: 10.1021/jacs.1c06207] [Citation(s) in RCA: 32] [Impact Index Per Article: 10.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Maximizing the regeneration of singlet excitons remains a considerable challenge in deep-blue emission systems to obtain low-cost, high-efficiency fluorescent materials. However, the formation of the long-lifetime triplet excitons generally dominates the radiative process, making it greatly difficult to harvest deep-blue emission with high color purity because of the depression of singlet excitons. Here, a very bright deep-blue emission in double perovskite Cs2Na0.4Ag0.6InCl6 alloyed with Bi doping (CNAICB) was successfully achieved by pressure-driven reverse intersystem crossing (RISC), an abnormal photophysical process of energy transfer from the excited triplet state back to the singlet. Therein, the inherently broad emission of CNAICB was associated with the self-trapped excitons (STEs) at excited triplet states, whereas the radiative recombination of STEs populated in excited singlet states was responsible for the observed deep-blue emission. Moreover, the deep-blue emission corresponds to Commission Internationale de L'Eclairage (CIE) coordinates (0.16, 0.06) at 5.01 GPa, which meets the requirement of Rec. 2020 display standards. Likewise, pressure was introduced as an efficient tool to rule out the possibility of the recombination of free excitons and clarify the long-standing conventional dispute over the origin of the low-wavelength emission of Cs2AgInCl6. Our study not only demonstrates that pressure can be a robust means to boost the deep-blue emission but also provides deep insights into the structure-property relationship of lead-free CNAICB double perovskites.
Collapse
Affiliation(s)
- Zhiwei Ma
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Qian Li
- Department of Chemistry, Academy for Advanced Interdisciplinary Studies, Shenzhen Engineering Research Center for Frontier Materials Synthesis at High Pressures, Southern University of Science and Technology (SUSTech), Shenzhen, Guangdong 518055, China
| | - Jiajun Luo
- Sargent Joint Research Center, Wuhan National Laboratory for Optoelectronics (WNLO) and School of Optical and Electronic Information, Huazhong University of Science and Technology (HUST), Wuhan 430074, China
| | - Shunran Li
- Sargent Joint Research Center, Wuhan National Laboratory for Optoelectronics (WNLO) and School of Optical and Electronic Information, Huazhong University of Science and Technology (HUST), Wuhan 430074, China
| | - Laizhi Sui
- State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023, China
| | - Dianlong Zhao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Kaijun Yuan
- State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, 457 Zhongshan Road, Dalian 116023, China
| | - Guanjun Xiao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| | - Jiang Tang
- Sargent Joint Research Center, Wuhan National Laboratory for Optoelectronics (WNLO) and School of Optical and Electronic Information, Huazhong University of Science and Technology (HUST), Wuhan 430074, China
| | - Zewei Quan
- Department of Chemistry, Academy for Advanced Interdisciplinary Studies, Shenzhen Engineering Research Center for Frontier Materials Synthesis at High Pressures, Southern University of Science and Technology (SUSTech), Shenzhen, Guangdong 518055, China
| | - Bo Zou
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun 130012, China
| |
Collapse
|
40
|
Zhao D, Xiao G, Liu Z, Sui L, Yuan K, Ma Z, Zou B. Harvesting Cool Daylight in Hybrid Organic-Inorganic Halides Microtubules through the Reservation of Pressure-Induced Emission. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2100323. [PMID: 34151466 DOI: 10.1002/adma.202100323] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/14/2021] [Revised: 03/26/2021] [Indexed: 06/13/2023]
Abstract
Pressure-induced emission (PIE) is extensively studied in halide perovskites or derivative hybrid halides. However, owing to the soft inorganic lattice of these materials, the intense emission is barely retained under ambient conditions, thus largely limiting their practical applications in optoelectronics at atmospheric pressure. Here, remarkably enhanced emission in microtubules of the 0D hybrid halide (C5 H7 N2 )2 ZnBr4 ((4AMP)2 ZnBr4 ) is successfully achieved by means of pressure treatment at room temperature. Notably, the emission, which is over ten times more intense than the emission in the initial state, is retained under ambient conditions upon the complete release of pressure. Furthermore, the pressure processing enables the tuning of "sky blue light" before compression to "cool daylight" with a remarkable quantum yield of 88.52% after decompression, which is of considerable interest for applications in next-generation lighting and displays. The irreversible electronic structural transition, induced by the steric hindrance with respect to complexly configurational organic molecules [4AMP], is highly responsible for the eventual retention of PIE and tuning of the color temperature. The findings represent a significant step toward the capture of PIE under ambient conditions, thus facilitating its potential solid-state lighting applications.
Collapse
Affiliation(s)
- Dianlong Zhao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China
| | - Guanjun Xiao
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China
| | - Zhun Liu
- Institute of Semiconductors, South China Normal University, Guangzhou, 510631, China
| | - Laizhi Sui
- State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
| | - Kaijun Yuan
- State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
| | - Zhiwei Ma
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China
| | - Bo Zou
- State Key Laboratory of Superhard Materials, College of Physics, Jilin University, Changchun, 130012, China
| |
Collapse
|
41
|
Hafez A, Liu Q, Santamarina JC. Self-assembly of millimeter-scale magnetic particles in suspension. SOFT MATTER 2021; 17:6935-6941. [PMID: 34105574 DOI: 10.1039/d1sm00588j] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Self-assembly is ubiquitous at all scales in nature. Most studies have focused on the self-assembly of micron-scale and nano-scale components. In this study, we explore the self-assembly of millimeter-scale magnetic particles in a bubble-column reactor to form 9 different structures. Two component systems (N-N and S-S particles) assemble faster than one-component systems (all particles have N-S poles) because they have more numerous bonding pathways. In addition, two-components add control to process initiation and evolution, and enable the formation of complex structures such as squares, tetrahedra and cubes. Self-assembly is collision-limited, thus, the formation time increases with the total number of bonds required to form the structure and the injected power. The dimensionless Mason number captures the interplay between hydrodynamic forces and magnetic interactions: self-assembly is most efficient at intermediate Mason numbers (the system is quasi-static at low Mason numbers with limited chances for particle interaction; on the other hand, hydrodynamic forces prevail over dipole-dipole interactions and hinder bonding at high Mason numbers). Two strategies to improve yield involve (1) the inclusion of pre-assembled nucleation templates to prevent the formation of incorrect initial structures that lead to kinetic traps, and (2) the presence of boundaries to geometrically filter unwanted configurations and to overcome kinetic traps through particle-wall collisions. Yield maximization involves system operation at an optimal Mason number, the inclusion of nucleation templates and the use of engineered boundaries (size and shape).
Collapse
Affiliation(s)
- Ahmed Hafez
- Earth Science and Engineering, KAUST, Thuwal 23955-6900, Saudi Arabia.
| | - Qi Liu
- Earth Science and Engineering, KAUST, Thuwal 23955-6900, Saudi Arabia.
| | | |
Collapse
|
42
|
Dey A, Ye J, De A, Debroye E, Ha SK, Bladt E, Kshirsagar AS, Wang Z, Yin J, Wang Y, Quan LN, Yan F, Gao M, Li X, Shamsi J, Debnath T, Cao M, Scheel MA, Kumar S, Steele JA, Gerhard M, Chouhan L, Xu K, Wu XG, Li Y, Zhang Y, Dutta A, Han C, Vincon I, Rogach AL, Nag A, Samanta A, Korgel BA, Shih CJ, Gamelin DR, Son DH, Zeng H, Zhong H, Sun H, Demir HV, Scheblykin IG, Mora-Seró I, Stolarczyk JK, Zhang JZ, Feldmann J, Hofkens J, Luther JM, Pérez-Prieto J, Li L, Manna L, Bodnarchuk MI, Kovalenko MV, Roeffaers MBJ, Pradhan N, Mohammed OF, Bakr OM, Yang P, Müller-Buschbaum P, Kamat PV, Bao Q, Zhang Q, Krahne R, Galian RE, Stranks SD, Bals S, Biju V, Tisdale WA, Yan Y, Hoye RLZ, Polavarapu L. State of the Art and Prospects for Halide Perovskite Nanocrystals. ACS NANO 2021; 15:10775-10981. [PMID: 34137264 PMCID: PMC8482768 DOI: 10.1021/acsnano.0c08903] [Citation(s) in RCA: 368] [Impact Index Per Article: 122.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/16/2020] [Accepted: 05/04/2021] [Indexed: 05/10/2023]
Abstract
Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.
Collapse
Grants
- from U. S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Materials Sciences and Engineering Division
- Ministry of Education, Culture, Sports, Science and Technology
- European Research Council under the European Unionâ??s Horizon 2020 research and innovation programme (HYPERION)
- Ministry of Education - Singapore
- FLAG-ERA JTC2019 project PeroGas.
- Deutsche Forschungsgemeinschaft
- Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences of the U.S. Department of Energy
- EPSRC
- iBOF funding
- Agencia Estatal de Investigaci�ón, Ministerio de Ciencia, Innovaci�ón y Universidades
- National Research Foundation Singapore
- National Natural Science Foundation of China
- Croucher Foundation
- US NSF
- Fonds Wetenschappelijk Onderzoek
- National Science Foundation
- Royal Society and Tata Group
- Department of Science and Technology, Ministry of Science and Technology
- Swiss National Science Foundation
- Natural Science Foundation of Shandong Province, China
- Research 12210 Foundation?Flanders
- Japan International Cooperation Agency
- Ministry of Science and Innovation of Spain under Project STABLE
- Generalitat Valenciana via Prometeo Grant Q-Devices
- VetenskapsrÃÂ¥det
- Natural Science Foundation of Jiangsu Province
- KU Leuven
- Knut och Alice Wallenbergs Stiftelse
- Generalitat Valenciana
- Agency for Science, Technology and Research
- Ministerio de EconomÃÂa y Competitividad
- Royal Academy of Engineering
- Hercules Foundation
- China Association for Science and Technology
- U.S. Department of Energy
- Alexander von Humboldt-Stiftung
- Wenner-Gren Foundation
- Welch Foundation
- Vlaamse regering
- European Commission
- Bayerisches Staatsministerium für Wissenschaft, Forschung und Kunst
Collapse
Affiliation(s)
- Amrita Dey
- Chair for
Photonics and Optoelectronics, Nano-Institute Munich, Department of
Physics, Ludwig-Maximilians-Universität
(LMU), Königinstrasse 10, 80539 Munich, Germany
| | - Junzhi Ye
- Cavendish
Laboratory, University of Cambridge, 19 JJ Thomson Avenue, Cambridge CB3 0HE, United Kingdom
| | - Apurba De
- School of
Chemistry, University of Hyderabad, Hyderabad 500 046, India
| | - Elke Debroye
- Department
of Chemistry, KU Leuven, 3001 Leuven, Belgium
| | - Seung Kyun Ha
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| | - Eva Bladt
- EMAT, University
of Antwerp, Groenenborgerlaan
171, 2020 Antwerp, Belgium
- NANOlab Center
of Excellence, University of Antwerp, 2020 Antwerp, Belgium
| | - Anuraj S. Kshirsagar
- Department
of Chemistry, Indian Institute of Science
Education and Research (IISER), Pune 411008, India
| | - Ziyu Wang
- School
of
Science and Technology for Optoelectronic Information ,Yantai University, Yantai, Shandong Province 264005, China
| | - Jun Yin
- Division
of Physical Science and Engineering, King
Abdullah University of Science and Technology, Thuwal 23955-6900, Kingdom of Saudi Arabia
- CINBIO,
Universidade de Vigo, Materials Chemistry
and Physics group, Departamento de Química Física, Campus Universitario As Lagoas,
Marcosende, 36310 Vigo, Spain
- Advanced
Membranes and Porous Materials Center, King
Abdullah University of Science and Technology, Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Yue Wang
- MIIT Key
Laboratory of Advanced Display Materials and Devices, Institute of
Optoelectronics & Nanomaterials, College of Materials Science
and Engineering, Nanjing University of Science
and Technology, Nanjing 210094, China
| | - Li Na Quan
- Department
of Chemistry, University of California,
Berkeley, Berkeley, California 94720, United States
- Materials
Sciences Division, Lawrence Berkeley National
Laboratory, Berkeley, California 94720, United States
| | - Fei Yan
- LUMINOUS!
Center of Excellence for Semiconductor Lighting and Displays, TPI-The
Photonics Institute, School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798
| | - Mengyu Gao
- Materials
Sciences Division, Lawrence Berkeley National
Laboratory, Berkeley, California 94720, United States
- Department
of Materials Science and Engineering, University
of California, Berkeley, California 94720, United States
| | - Xiaoming Li
- MIIT Key
Laboratory of Advanced Display Materials and Devices, Institute of
Optoelectronics & Nanomaterials, College of Materials Science
and Engineering, Nanjing University of Science
and Technology, Nanjing 210094, China
| | - Javad Shamsi
- Cavendish
Laboratory, University of Cambridge, 19 JJ Thomson Avenue, Cambridge CB3 0HE, United Kingdom
| | - Tushar Debnath
- Chair for
Photonics and Optoelectronics, Nano-Institute Munich, Department of
Physics, Ludwig-Maximilians-Universität
(LMU), Königinstrasse 10, 80539 Munich, Germany
| | - Muhan Cao
- Institute
of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory
for Carbon-Based Functional Materials and Devices, Soochow University, Suzhou 215123, China
| | - Manuel A. Scheel
- Lehrstuhl
für Funktionelle Materialien, Physik Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
| | - Sudhir Kumar
- Institute
for Chemical and Bioengineering, Department of Chemistry and Applied
Biosciences, ETH-Zurich, CH-8093 Zürich, Switzerland
| | - Julian A. Steele
- MACS Department
of Microbial and Molecular Systems, KU Leuven, 3001 Leuven, Belgium
| | - Marina Gerhard
- Chemical
Physics and NanoLund Lund University, PO Box 124, 22100 Lund, Sweden
| | - Lata Chouhan
- Graduate
School of Environmental Science and Research Institute for Electronic
Science, Hokkaido University, Sapporo, Hokkaido 001-0020, Japan
| | - Ke Xu
- Department
of Chemistry and Biochemistry, University
of California, Santa Cruz, California 95064, United States
- Multiscale
Crystal Materials Research Center, Shenzhen Institute of Advanced
Technology, Chinese Academy of Sciences, Shenzhen 518055, China
| | - Xian-gang Wu
- Beijing
Key Laboratory of Nanophotonics and Ultrafine Optoelectronic Systems,
School of Materials Science & Engineering, Beijing Institute of Technology, 5 Zhongguancun South Street, Haidian
District, Beijing 100081, China
| | - Yanxiu Li
- Department
of Materials Science and Engineering, and Centre for Functional Photonics
(CFP), City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong S.A.R.
| | - Yangning Zhang
- McKetta
Department of Chemical Engineering and Texas Materials Institute, The University of Texas at Austin, Austin, Texas 78712-1062, United States
| | - Anirban Dutta
- School
of Materials Sciences, Indian Association
for the Cultivation of Science, Kolkata 700032, India
| | - Chuang Han
- Department
of Chemistry and Biochemistry, San Diego
State University, San Diego, California 92182, United States
| | - Ilka Vincon
- Chair for
Photonics and Optoelectronics, Nano-Institute Munich, Department of
Physics, Ludwig-Maximilians-Universität
(LMU), Königinstrasse 10, 80539 Munich, Germany
| | - Andrey L. Rogach
- Department
of Materials Science and Engineering, and Centre for Functional Photonics
(CFP), City University of Hong Kong, 83 Tat Chee Avenue, Kowloon, Hong Kong S.A.R.
| | - Angshuman Nag
- Department
of Chemistry, Indian Institute of Science
Education and Research (IISER), Pune 411008, India
| | - Anunay Samanta
- School of
Chemistry, University of Hyderabad, Hyderabad 500 046, India
| | - Brian A. Korgel
- McKetta
Department of Chemical Engineering and Texas Materials Institute, The University of Texas at Austin, Austin, Texas 78712-1062, United States
| | - Chih-Jen Shih
- Institute
for Chemical and Bioengineering, Department of Chemistry and Applied
Biosciences, ETH-Zurich, CH-8093 Zürich, Switzerland
| | - Daniel R. Gamelin
- Department
of Chemistry, University of Washington, Seattle, Washington 98195, United States
| | - Dong Hee Son
- Department
of Chemistry, Texas A&M University, College Station, Texas 77843, United States
| | - Haibo Zeng
- MIIT Key
Laboratory of Advanced Display Materials and Devices, Institute of
Optoelectronics & Nanomaterials, College of Materials Science
and Engineering, Nanjing University of Science
and Technology, Nanjing 210094, China
| | - Haizheng Zhong
- Beijing
Key Laboratory of Nanophotonics and Ultrafine Optoelectronic Systems,
School of Materials Science & Engineering, Beijing Institute of Technology, 5 Zhongguancun South Street, Haidian
District, Beijing 100081, China
| | - Handong Sun
- Division
of Physics and Applied Physics, School of Physical and Mathematical
Sciences, Nanyang Technological University, Singapore 637371
- Centre
for Disruptive Photonic Technologies (CDPT), Nanyang Technological University, Singapore 637371
| | - Hilmi Volkan Demir
- LUMINOUS!
Center of Excellence for Semiconductor Lighting and Displays, TPI-The
Photonics Institute, School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore 639798
- Division
of Physics and Applied Physics, School of Physical and Mathematical
Sciences, Nanyang Technological University, Singapore 639798
- Department
of Electrical and Electronics Engineering, Department of Physics,
UNAM-Institute of Materials Science and Nanotechnology, Bilkent University, Ankara 06800, Turkey
| | - Ivan G. Scheblykin
- Chemical
Physics and NanoLund Lund University, PO Box 124, 22100 Lund, Sweden
| | - Iván Mora-Seró
- Institute
of Advanced Materials (INAM), Universitat
Jaume I, 12071 Castelló, Spain
| | - Jacek K. Stolarczyk
- Chair for
Photonics and Optoelectronics, Nano-Institute Munich, Department of
Physics, Ludwig-Maximilians-Universität
(LMU), Königinstrasse 10, 80539 Munich, Germany
| | - Jin Z. Zhang
- Department
of Chemistry and Biochemistry, University
of California, Santa Cruz, California 95064, United States
| | - Jochen Feldmann
- Chair for
Photonics and Optoelectronics, Nano-Institute Munich, Department of
Physics, Ludwig-Maximilians-Universität
(LMU), Königinstrasse 10, 80539 Munich, Germany
| | - Johan Hofkens
- Department
of Chemistry, KU Leuven, 3001 Leuven, Belgium
- Max Planck
Institute for Polymer Research, Mainz 55128, Germany
| | - Joseph M. Luther
- National
Renewable Energy Laboratory, Golden, Colorado 80401, United States
| | - Julia Pérez-Prieto
- Institute
of Molecular Science, University of Valencia, c/Catedrático José
Beltrán 2, Paterna, Valencia 46980, Spain
| | - Liang Li
- School
of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Liberato Manna
- Nanochemistry
Department, Istituto Italiano di Tecnologia, Via Morego 30, Genova 16163, Italy
| | - Maryna I. Bodnarchuk
- Institute
of Inorganic Chemistry and § Institute of Chemical and Bioengineering,
Department of Chemistry and Applied Bioscience, ETH Zurich, Vladimir
Prelog Weg 1, CH-8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa−Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, CH-8600 Dübendorf, Switzerland
| | - Maksym V. Kovalenko
- Institute
of Inorganic Chemistry and § Institute of Chemical and Bioengineering,
Department of Chemistry and Applied Bioscience, ETH Zurich, Vladimir
Prelog Weg 1, CH-8093 Zürich, Switzerland
- Laboratory
for Thin Films and Photovoltaics, Empa−Swiss
Federal Laboratories for Materials Science and Technology, Überlandstrasse 129, CH-8600 Dübendorf, Switzerland
| | | | - Narayan Pradhan
- School
of Materials Sciences, Indian Association
for the Cultivation of Science, Kolkata 700032, India
| | - Omar F. Mohammed
- Advanced
Membranes and Porous Materials Center, King
Abdullah University of Science and Technology, Thuwal 23955-6900, Kingdom of Saudi Arabia
- KAUST Catalysis
Center, King Abdullah University of Science
and Technology, Thuwal 23955-6900, Kingdom of Saudi
Arabia
| | - Osman M. Bakr
- Division
of Physical Science and Engineering, King
Abdullah University of Science and Technology, Thuwal 23955-6900, Kingdom of Saudi Arabia
- Advanced
Membranes and Porous Materials Center, King
Abdullah University of Science and Technology, Thuwal 23955-6900, Kingdom of Saudi Arabia
| | - Peidong Yang
- Department
of Chemistry, University of California,
Berkeley, Berkeley, California 94720, United States
- Materials
Sciences Division, Lawrence Berkeley National
Laboratory, Berkeley, California 94720, United States
- Department
of Materials Science and Engineering, University
of California, Berkeley, California 94720, United States
- Kavli
Energy NanoScience Institute, Berkeley, California 94720, United States
| | - Peter Müller-Buschbaum
- Lehrstuhl
für Funktionelle Materialien, Physik Department, Technische Universität München, James-Franck-Str. 1, 85748 Garching, Germany
- Heinz Maier-Leibnitz
Zentrum (MLZ), Technische Universität
München, Lichtenbergstr. 1, D-85748 Garching, Germany
| | - Prashant V. Kamat
- Notre Dame
Radiation Laboratory, Department of Chemistry and Biochemistry, University of Notre Dame, Notre Dame, Indiana 46556, United States
| | - Qiaoliang Bao
- Department
of Materials Science and Engineering and ARC Centre of Excellence
in Future Low-Energy Electronics Technologies (FLEET), Monash University, Clayton, Victoria 3800, Australia
| | - Qiao Zhang
- Institute
of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory
for Carbon-Based Functional Materials and Devices, Soochow University, Suzhou 215123, China
| | - Roman Krahne
- Istituto
Italiano di Tecnologia, Via Morego 30, 16163 Genova, Italy
| | - Raquel E. Galian
- School
of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
| | - Samuel D. Stranks
- Cavendish
Laboratory, University of Cambridge, 19 JJ Thomson Avenue, Cambridge CB3 0HE, United Kingdom
- Department
of Chemical Engineering and Biotechnology, University of Cambridge, Cambridge CB3 0AS, United Kingdom
| | - Sara Bals
- EMAT, University
of Antwerp, Groenenborgerlaan
171, 2020 Antwerp, Belgium
- NANOlab Center
of Excellence, University of Antwerp, 2020 Antwerp, Belgium
| | - Vasudevanpillai Biju
- Graduate
School of Environmental Science and Research Institute for Electronic
Science, Hokkaido University, Sapporo, Hokkaido 001-0020, Japan
| | - William A. Tisdale
- Department
of Chemical Engineering, Massachusetts Institute
of Technology, Cambridge, Massachusetts 02139, United States
| | - Yong Yan
- Department
of Chemistry and Biochemistry, San Diego
State University, San Diego, California 92182, United States
| | - Robert L. Z. Hoye
- Department
of Materials, Imperial College London, Exhibition Road, London SW7 2AZ, United Kingdom
| | - Lakshminarayana Polavarapu
- Chair for
Photonics and Optoelectronics, Nano-Institute Munich, Department of
Physics, Ludwig-Maximilians-Universität
(LMU), Königinstrasse 10, 80539 Munich, Germany
- CINBIO,
Universidade de Vigo, Materials Chemistry
and Physics group, Departamento de Química Física, Campus Universitario As Lagoas,
Marcosende, 36310 Vigo, Spain
| |
Collapse
|
43
|
Le TH, Lee S, Jo H, Jeong G, Chang M, Yoon H. Morphology-Dependent Ambient-Condition Growth of Perovskite Nanocrystals for Enhanced Stability in Photoconversion Device. J Phys Chem Lett 2021; 12:5631-5638. [PMID: 34110154 DOI: 10.1021/acs.jpclett.1c01376] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
CsPbBr3 perovskite nanocrystals with two different dimensionalities were synthesized at different temperatures and then integrated as optoelectronic transducers into transistor-type photoconversion devices. Postsynthesis transformation was observed for two-dimensional (2D) nanoplatelets, while the transformation was rarely found in 3D nanocubes. At ambient temperature and pressure, neighboring nanoplatelets made facet-to-facet contact and then fused into larger 2D nanoplatelets (2-5 times) without defects. The coalescence of 2D nanoplatelets at the ambient condition lowered the density of defects at the surface of the nanocrystals and thus could facilitate effective and stable photoconversion behavior in the nanocrystal film integrated into the device. Consequently, the ambient-condition aging of 2D nanoplatelets on device substrate led to 3 times higher retention in photoconversion performance. Importantly, these results provide a new concept of how perovskite nanocrystals can be integrated into a device for enhanced stability in device performance.
Collapse
Affiliation(s)
- Thanh-Hai Le
- Alan G. MacDiarmid Energy Research Institute & School of Polymer Science and Engineering, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
| | - Sanghyuck Lee
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
| | - Hyemi Jo
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
| | - Ganghoon Jeong
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
| | - Mincheol Chang
- Alan G. MacDiarmid Energy Research Institute & School of Polymer Science and Engineering, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
| | - Hyeonseok Yoon
- Alan G. MacDiarmid Energy Research Institute & School of Polymer Science and Engineering, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
- Department of Polymer Engineering, Graduate School, Chonnam National University, 77 Yongbong-ro, Gwangju 61186, South Korea
| |
Collapse
|
44
|
Near Unity PLQY and High Stability of Barium Thiocyanate Based All-Inorganic Perovskites and Their Applications in White Light-Emitting Diodes. PHOTONICS 2021. [DOI: 10.3390/photonics8060209] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/19/2023]
Abstract
All-inorganic lead halide perovskite (CsPbX3) nanocrystals (NCs) have emerged as a highly promising new generation of light emitters due to their extraordinary photophysical properties. However, the performance of these semiconducting NCs is undermined due to the inherent toxicity of lead and long-term environmental stability. Here, we report the addition of B-site cation and X-site anion (pseudo-halide) concurrently using Ba(SCN)2 (≤50%) in CsPbX3 NCs to reduce the lead and improve the photophysical properties and stability. The as-grown particles demonstrated an analogous structure with an almost identical lattice constant and a fluctuation of particle size without altering the morphology of particles. Photoluminescence quantum yield is enhanced up to near unity (~98%) by taking advantage of concomitant doping at the B- and X-site of the structure. Benefitted from the defect reductions and stronger bonding interaction between Pb2+ and SCN− ions, Ba(SCN)2-based NCs exhibit improved stability towards air and moisture compared to the host NCs. The doped NCs retain higher PLQY (as high as seven times) compared to the host NCs) when stored in an ambient atmosphere for more than 176 days. A novel 3D-printed multiplex color conversion layer was used to fabricate a white light-emitting diode (LED). The obtained white light shows a correlated color temperature of 6764 K, a color rendering index of 87, and luminous efficacy of radiation of 333 lm/W. In summary, this work proposes a facile route to treat sensitive lead halide perovskite NCs and to fabricate LEDs by using a low-cost large-scale 3-D printing method, which would serve as a foundation for fabricating high-quality optoelectronic devices for near future lighting technologies.
Collapse
|
45
|
Smolders TJAM, Walker AB, Wolf MJ. 3D-to-2D Transition of Anion Vacancy Mobility in CsPbBr 3 under Hydrostatic Pressure. J Phys Chem Lett 2021; 12:5169-5177. [PMID: 34033492 DOI: 10.1021/acs.jpclett.1c00554] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Anion vacancy migration in the orthorhombic Pnma phase of the lead-halide perovskite CsPbBr3 under hydrostatic pressure is studied computationally. Density functional theory calculations are used to determine transition states, activation enthalpies, and attempt frequencies for vacancies to hop between nearby lattice sites, under pressure in the range 0.0-2.0 GPa. The resulting data are used to parametrize a kinetic model of vacancy migration under the influence of an electric field, which is solved in the steady state to determine the anion vacancy mobility tensor as a function of pressure. It is found that the mobility tensor becomes increasingly anisotropic with increasing pressure, such that at 2.0 GPa, the mobility within the (010) lattice plane is 3 orders of magnitude greater than the mobility normal to it. The results demonstrate the potentially significant influence of pressure, and by extension, other forms of stress, on defect migration in lead-halide perovskites.
Collapse
Affiliation(s)
- Thijs J A M Smolders
- Department of Physics, University of Bath, Claverton Down, Bath BA2 7AY, United Kingdom
| | - Alison B Walker
- Department of Physics, University of Bath, Claverton Down, Bath BA2 7AY, United Kingdom
| | - Matthew J Wolf
- Department of Physics, University of Bath, Claverton Down, Bath BA2 7AY, United Kingdom
| |
Collapse
|
46
|
Hills‐Kimball K, Yang H, Cai T, Wang J, Chen O. Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:2100214. [PMID: 34194945 PMCID: PMC8224438 DOI: 10.1002/advs.202100214] [Citation(s) in RCA: 49] [Impact Index Per Article: 16.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/18/2021] [Revised: 03/17/2021] [Indexed: 05/09/2023]
Abstract
Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.
Collapse
Affiliation(s)
| | - Hanjun Yang
- Department of ChemistryBrown UniversityProvidenceRI02912USA
| | - Tong Cai
- Department of ChemistryBrown UniversityProvidenceRI02912USA
| | - Junyu Wang
- Department of ChemistryBrown UniversityProvidenceRI02912USA
| | - Ou Chen
- Department of ChemistryBrown UniversityProvidenceRI02912USA
| |
Collapse
|
47
|
Sun M, Geng T, Yong X, Lu S, Ai L, Xiao G, Cai J, Zou B, Zang S. Pressure-Triggered Blue Emission of Zero-Dimensional Organic Bismuth Bromide Perovskite. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2021; 8:2004853. [PMID: 33977076 PMCID: PMC8097370 DOI: 10.1002/advs.202004853] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/16/2020] [Revised: 01/10/2021] [Indexed: 05/20/2023]
Abstract
Understanding the structure-property relationships in Zero-dimensional (0D) organic-inorganic metal halide perovskites (OMHPs) is essential for their use in optoelectronic applications. Moreover, increasing the emission intensity, particularly for blue emission, is considerably a challenge. Here, intriguing pressure-induced emission (PIE) is successfully achieved from an initially nonluminous 0D OMHP [(C6H11NH3)4BiBr6]Br·CH3CN (Cy4BiBr7 ) upon compression. The emission intensity increases significantly, even reaching high-efficiency blue luminescence, as the external pressure is increased to 4.9 GPa. Analyses of the in situ high-pressure experiments and first-principle calculations indicate that the observed PIE can be attributed to the enhanced exciton binding energy associated with [BiBr6]3- octahedron distortion under pressure. This study of Cy4BiBr7 sheds light on the relationship between the structure and optical properties of OMHPs. The results may improve potential applications of such materials in the fields of pressure sensing and trademark security.
Collapse
Affiliation(s)
- Meng‐En Sun
- Green Catalysis Center and College of ChemistryZhengzhou UniversityZhengzhou450001P. R. China
| | - Ting Geng
- State Key Laboratory of Superhard MaterialsCollege of PhysicsJilin UniversityChangchun130012P. R. China
| | - Xue Yong
- Green Catalysis Center and College of ChemistryZhengzhou UniversityZhengzhou450001P. R. China
| | - Siyu Lu
- Green Catalysis Center and College of ChemistryZhengzhou UniversityZhengzhou450001P. R. China
| | - Lin Ai
- Green Catalysis Center and College of ChemistryZhengzhou UniversityZhengzhou450001P. R. China
| | - Guanjun Xiao
- State Key Laboratory of Superhard MaterialsCollege of PhysicsJilin UniversityChangchun130012P. R. China
| | - Jinmeng Cai
- Green Catalysis Center and College of ChemistryZhengzhou UniversityZhengzhou450001P. R. China
| | - Bo Zou
- State Key Laboratory of Superhard MaterialsCollege of PhysicsJilin UniversityChangchun130012P. R. China
| | - Shuang‐Quan Zang
- Green Catalysis Center and College of ChemistryZhengzhou UniversityZhengzhou450001P. R. China
| |
Collapse
|
48
|
Perovskite-type superlattices from lead halide perovskite nanocubes. Nature 2021; 593:535-542. [PMID: 34040208 DOI: 10.1038/s41586-021-03492-5] [Citation(s) in RCA: 82] [Impact Index Per Article: 27.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/24/2020] [Accepted: 03/25/2021] [Indexed: 02/04/2023]
Abstract
Atomically defined assemblies of dye molecules (such as H and J aggregates) have been of interest for more than 80 years because of the emergence of collective phenomena in their optical spectra1-3, their coherent long-range energy transport, their conceptual similarity to natural light-harvesting complexes4,5, and their potential use as light sources and in photovoltaics. Another way of creating versatile and controlled aggregates that exhibit collective phenomena involves the organization of colloidal semiconductor nanocrystals into long-range-ordered superlattices6. Caesium lead halide perovskite nanocrystals7-9 are promising building blocks for such superlattices, owing to the high oscillator strength of bright triplet excitons10, slow dephasing (coherence times of up to 80 picoseconds) and minimal inhomogeneous broadening of emission lines11,12. So far, only single-component superlattices with simple cubic packing have been devised from these nanocrystals13. Here we present perovskite-type (ABO3) binary and ternary nanocrystal superlattices, created via the shape-directed co-assembly of steric-stabilized, highly luminescent cubic CsPbBr3 nanocrystals (which occupy the B and/or O lattice sites), spherical Fe3O4 or NaGdF4 nanocrystals (A sites) and truncated-cuboid PbS nanocrystals (B sites). These ABO3 superlattices, as well as the binary NaCl and AlB2 superlattice structures that we demonstrate, exhibit a high degree of orientational ordering of the CsPbBr3 nanocubes. They also exhibit superfluorescence-a collective emission that results in a burst of photons with ultrafast radiative decay (22 picoseconds) that could be tailored for use in ultrabright (quantum) light sources. Our work paves the way for further exploration of complex, ordered and functionally useful perovskite mesostructures.
Collapse
|
49
|
Biesold GM, Liang S, Brettmann B, Thadhani N, Kang Z, Lin Z. Tailoring Optical Properties of Luminescent Semiconducting Nanocrystals through Hydrostatic, Anisotropic Static, and Dynamic Pressures. Angew Chem Int Ed Engl 2021. [DOI: 10.1002/ange.202008395] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Gill M. Biesold
- School of Materials Science and Engineering Georgia Institute of Technology Atlanta Georgia 30332 USA
| | - Shuang Liang
- School of Materials Science and Engineering Georgia Institute of Technology Atlanta Georgia 30332 USA
| | - Blair Brettmann
- School of Materials Science and Engineering Georgia Institute of Technology Atlanta Georgia 30332 USA
- School of Chemical and Biomedical Engineering Georgia Institute of Technology Atlanta Georgia 30332 USA
| | - Naresh Thadhani
- School of Materials Science and Engineering Georgia Institute of Technology Atlanta Georgia 30332 USA
| | - Zhitao Kang
- School of Materials Science and Engineering Georgia Institute of Technology Atlanta Georgia 30332 USA
- Georgia Tech Research Institute Georgia Institute of Technology Atlanta Georgia 30332 USA
| | - Zhiqun Lin
- School of Materials Science and Engineering Georgia Institute of Technology Atlanta Georgia 30332 USA
| |
Collapse
|
50
|
Giuntini D, Davydok A, Blankenburg M, Domènech B, Bor B, Li M, Scheider I, Krywka C, Müller M, Schneider GA. Deformation Behavior of Cross-Linked Supercrystalline Nanocomposites: An in Situ SAXS/WAXS Study during Uniaxial Compression. NANO LETTERS 2021; 21:2891-2897. [PMID: 33749275 PMCID: PMC8155193 DOI: 10.1021/acs.nanolett.0c05041] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/22/2020] [Revised: 03/17/2021] [Indexed: 05/17/2023]
Abstract
With the ever-expanding functional applications of supercrystalline nanocomposites (a relatively new category of materials consisting of organically functionalized nanoparticles arranged into periodic structures), it becomes necessary to ensure their structural stability and understand their deformation and failure mechanisms. Inducing the cross-linking of the functionalizing organic ligands, for instance, leads to a remarkable enhancement of the nanocomposites' mechanical properties. It is however still unknown how the cross-linked organic phase redistributes applied loads, how the supercrystalline lattice accommodates the imposed deformations, and thus in general what phenomena govern the overall material's mechanical response. This work elucidates these aspects for cross-linked supercrystalline nanocomposites through an in situ small- and wide-angle X-ray scattering study combined with uniaxial pressing. Because of this loading condition, it emerges that the cross-linked ligands effectively carry and distribute loads homogeneously throughout the nanocomposites, while the superlattice deforms via rotation, slip, and local defects generation.
Collapse
Affiliation(s)
- Diletta Giuntini
- Institute
of Advanced Ceramics, Hamburg University
of Technology, 21073 Hamburg, Germany
| | - Anton Davydok
- Institute
of Materials Physics, Helmholtz-Zentrum
Geesthacht, 21502 Geesthacht, Germany
| | - Malte Blankenburg
- Institute
of Materials Physics, Helmholtz-Zentrum
Geesthacht, 21502 Geesthacht, Germany
| | - Berta Domènech
- Institute
of Advanced Ceramics, Hamburg University
of Technology, 21073 Hamburg, Germany
| | - Büsra Bor
- Institute
of Advanced Ceramics, Hamburg University
of Technology, 21073 Hamburg, Germany
| | - Mingjing Li
- Institute
of Material Systems Modeling, Helmholtz-Zentrum
Geesthacht, 21502 Geesthacht, Germany
| | - Ingo Scheider
- Institute
of Material Systems Modeling, Helmholtz-Zentrum
Geesthacht, 21502 Geesthacht, Germany
| | - Christina Krywka
- Institute
of Materials Physics, Helmholtz-Zentrum
Geesthacht, 21502 Geesthacht, Germany
| | - Martin Müller
- Institute
of Materials Physics, Helmholtz-Zentrum
Geesthacht, 21502 Geesthacht, Germany
| | - Gerold A. Schneider
- Institute
of Advanced Ceramics, Hamburg University
of Technology, 21073 Hamburg, Germany
| |
Collapse
|