Understanding the Crystal Packing and Organic Thin-Film Transistor Performance in Isomeric Guest-Host Systems

Quantitative Hole Mobility Simulation and Validation in Substituted Acenes

Knowledge of the full phonon spectrum is essential to accurately calculate the dynamic disorder (σ) and hole mobility (μ_h) in organic semiconductors (OSCs). However, most vibrational spectroscopy techniques under-measure the phonons, thus limiting the phonon validation. Here, we measure and model the full phonon spectrum using multiple spectroscopic techniques and predict μ_h using σ from only the Γ-point and the full Brillouin zone (FBZ). We find that only inelastic neutron scattering (INS) provides validation of all phonon modes, and that σ in a set of small molecule semiconductors can be miscalculated by up to 28% when comparing Γ-point against FBZ calculations. A subsequent mode analysis shows that many modes contribute to σ and that no single mode dominates. Our results demonstrate the importance of a thoroughly validated phonon calculation, and a need to develop design rules considering the full spectrum of phonon modes.

Stereo-electronic effect of perfluoropropyl group on solid state molecular packing of isomeric dibenzo [a,c]phenazine derivatives

We report here the synthesis, characterization, and crystal structures of three perfluoropropylated dibenzo [a,c]phenazine constitutional isomers where the only differences among them are the position of perfluoropropyl substituents. The crystal...

Lithographical Fabrication of Organic Single-Crystal Arrays by Area-Selective Growth and Solvent Vapor Annealing

Miniaturized organic single-crystal arrays that are addressed by reading-out circuits are crucial for high performance and high-level integration organic electronics. Here, we report a lithography compatible strategy to fabricate organic single-crystal arrays via area-selective growth and solvent vapor annealing (SVA). The organic semiconducting molecules can first selectively grow on photographically patterned drain-source electrodes, forming ordered amorphous aggregates that can further be converted to discrete single-crystal arrays by SVA. This strategy can be applied to self-align the microsized organic single crystals on predesigned locations. With this method, suppression of cross-talk among devices, organic field-effect transistors, and basic logic gate arrays with reading-out electrodes are further demonstrated.

A Benzo[1,2-b:4,5-c']Dithiophene-4,8-Dione-Based Polymer Donor Achieving an Efficiency Over 16

It is of great significance to develop efficient donor polymers during the rapid development of acceptor materials for nonfullerene bulk-heterojunction (BHJ) polymer solar cells. Herein, a new donor polymer, named PBTT-F, based on a strongly electron-deficient core (5,7-dibromo-2,3-bis(2-ethylhexyl)benzo[1,2-b:4,5-c']dithiophene-4,8-dione, TTDO), is developed through the design of cyclohexane-1,4-dione embedded into a thieno[3,4-b]thiophene (TT) unit. When blended with the acceptor Y6, the PBTT-F-based photovoltaic device exhibits an outstanding power conversion efficiency (PCE) of 16.1% with a very high fill factor (FF) of 77.1%. This polymer also shows high efficiency for a thick-film device, with a PCE of ≈14.2% being realized for an active layer thickness of 190 nm. In addition, the PBTT-F-based polymer solar cells also show good stability after storage for ≈700 h in a glove box, with a high PCE of ≈14.8%, which obviously shows that this kind of polymer is very promising for future commercial applications. This work provides a unique strategy for the molecular synthesis of donor polymers, and these results demonstrate that PBTT-F is a very promising donor polymer for use in polymer solar cells, providing an alternative choice for a variety of fullerene-free acceptor materials for the research community.

Synthesis of polycyclic aromatic hydrocarbons by palladium-catalysed [3 + 3] annulation

A new [3 + 3] annulation method for the synthesis of polycyclic aromatic hydrocarbons (PAHs) from two smaller aromatic fragments is reported. Packing structures for four products were obtained and relation to that of parent perylene was discussed.

Computationally aided design of a high-performance organic semiconductor: the development of a universal crystal engineering core

Herein, we describe the design and synthesis of a suite of molecules based on a benzodithiophene "universal crystal engineering core". After computationally screening derivatives, a trialkylsilylethyne-based crystal engineering strategy was employed to tailor the crystal packing for use as the active material in an organic field-effect transistor. Electronic structure calculations were undertaken to reveal derivatives that exhibit exceptional potential for high-efficiency hole transport. The promising theoretical properties are reflected in the preliminary device results, with the computationally optimized material showing simple solution processing, enhanced stability, and a maximum hole mobility of 1.6 cm2 V-1 s-1.

On-the-Spot Detection and Speciation of Cannabinoids Using Organic Thin-Film Transistors

Quality control is imperative for Cannabis since the primary cannabinoids, Δ⁹-tetrahydrocannabinol (THC) and cannabidiol (CBD), elicit very different pharmacological effects. THC/CBD ratios are currently determined by techniques not readily accessible by consumers or dispensaries and which are impractical for use in the field by law-enforcement agencies. CuPc- and F₁₆-CuPc-based organic thin-film transistors have been combined with a cannabinoid-sensitive chromophore for the detection and differentiation of THC and CBD. The combined use of these well-characterized and inexpensive p- and n-type materials afforded the determination of the CBD/THC ratio from rapid plant extracts, with results indistinguishable from high-pressure liquid chromatography. Analysis of the prepyrolyzed sample accurately predicted postpyrolysis THC/CBD, which ultimately influences the psychotropic and medicinal effects of the specific plant. The devices were also capable of vapor-phase sensing, producing a unique electrical output for THC and CBD relative to other potentially interfering vaporized organic products. The analysis of complex medicinal plant extracts and vapors, normally reserved for advanced analytical infrastructure, can be achieved with ease, at low cost, and on the spot, using organic thin-film transistors.

Heterocycle Effects on the Liquid Crystallinity of Terthiophene Analogues

Liquid crystalline self-assembly offers the potential to create highly ordered, uniformly aligned, and defect-free thin-film organic semiconductors. Analogues of one of the more promising classes of liquid crystal semiconductors, 5,5"-dialkyl-α-terthiophenes, were prepared in order to investigate the effects of replacing the central thiophene with either an oxadiazole or a thiadiazole ring. The phase behaviour was examined by differential scanning calorimetry, polarized optical microscopy, and variable temperature x-ray diffraction. While the oxadiazole derivative was not liquid crystalline, thiadiazole derivatives formed smectic C and soft crystal lamellar phases, and maintained lamellar order down to room temperature. Variation of the terminal alkyl chains also influenced the observed phase sequence. Single crystal structures revealed the face-to-face orientation of molecules within the layers in the solid-state, a packing motif that is rationalized based on the shape and dipole of the thiadiazole ring, as corroborated by density functional theory (DFT) calculations. The solution opto-electronic properties of the systems were characterized by absorption and emission spectroscopy, cyclic voltammetry, and time-dependent density functional theory (TD-DFT).

Doping: A Key Enabler for Organic Transistors

Organic field-effect transistors (OFETs) are the central building blocks of organic electronics, but still suffer from low performance and manufacturing difficulties. This is due in part to the absence of doping, which is mostly excluded from OFET applications for the concern about uncontrollable dopant diffusion. Doping enabled the modern semiconductor industry to build essential components like Ohmic contacts and P-N junctions, empowering devices to function as designed. Recent breakthroughs in organic semiconductors and doping techniques demonstrated that doping can also be a key enabler for high-performance OFETs. However, the knowledge of organic doping remains limited particularly for OFET use. Therefore, this review addresses OFET doping from a device perspective. The paper overviews doping basics and roles in advanced complementary technologies. These fundamentals help to understand why and how doping provides the desired transistor characteristics. Typical OFETs without doping are discussed, with consideration for operating principle and problems caused by the absence of doping. Achievements for channel, contact, and overall doping are also examined to clarify the corresponding doping roles. Finally, doping mechanisms, techniques, and dopants associated with OFET applications are reviewed. This paper promotes fundamental understanding of OFET doping for the development of high-performance OFETs with doped components.

Correlating Charge Transport with Structure in Deconstructed Diketopyrrolopyrrole Oligomers: A Case Study of a Monomer in Field-Effect Transistors

Copolymers based on diketopyrrolopyrrole (DPP) cores have attracted a lot of attention because of their high p-type as well as n-type carrier mobilities in organic field-effect transistors (FETs) and high power conversion efficiencies in solar cell structures. We report the structural and charge transport properties of n-dialkyl side-chain-substituted thiophene DPP end-capped with a phenyl group (Ph-TDPP-Ph) monomer in FETs which were fabricated by vacuum deposition and solvent coating. Grazing-incidence X-ray diffraction (GIXRD) from bottom-gate, bottom-contact FET architectures was measured with and without biasing. Ph-TDPP-Ph reveals a polymorphic structure with π-conjugated stacking direction oriented in-plane. The unit cell comprises either one monomer with a = 20.89 Å, b = 13.02 Å, c = 5.85 Å, α = 101.4°, β = 90.6°, and γ = 94.7° for one phase (TR1) or two monomers with a = 24.92 Å, b = 25.59 Å, c = 5.42 Å, α = 80.3°, β = 83.5°, and γ = 111.8° for the second phase (TR2). The TR2 phase thus signals a shift from a coplanar to herringbone orientation of the molecules. The device performance is sensitive to the ratio of the two triclinic phases found in the film. Some of the best FET performances with p-type carrier mobilities of 0.1 cm²/V s and an on/off ratio of 10⁶ are for films that comprise mainly the TR1 phase. GIXRD from in operando FETs demonstrates the crystalline stability of Ph-TDPP-Ph.