Adsorption and Detection of Hazardous Trace Gases by Metal-Organic Frameworks

A cobalt(II) coordination polymer-derived catalyst engineered via temperature-induced semi-reversible single-crystal-to-single-crystal (SCSC) dehydration for efficient liquid-phase epoxidation of olefins

Single-crystal-to-single-crystal (SCSC) transformations provide more avenues for phase transitions, which have piqued great interest in crystal engineering. In this work, a 3D Co(II)-based coordination polymer (CP), {Co2(OH2)8(btec)}·4H2O (1), (where (btec)4- = 1,2,4,5-benzenetetracarboxylate) undergoes SCSC transition upon heating at 180 °C to afford an anhydrous phase [Co2(btec)] (1'). Room-temperature water-vapour induced semi-reversible SCSC transformation of 1' involves condensation of two water molecules coordinating to the metal cluster, yielding a new framework [Co2(OH2)2(btec)] (2). These SCSC transitions were accomplished through a sequential bond breaking and new bond formation process which was accompanied by colour changes from orange (1) → violet (1') → pink (2). All materials were structurally elucidated by single-crystal X-ray diffraction (SCXRD) and further established by various analytical techniques. According to SCXRD data, all the frameworks possess octahedral geometries around the cobalt(II) sphere. SCXRD studies further revealed that 1 is a polymeric architecture with a binodal 4-c sql topology while 1' and 2 possess (3,6)-c kgd and (4,6)-c scu 3D nets, respectively. By virtue of multitopicity exhibited by the tetracarboxylate, the coordination number of the linker around the Co(II) sphere increased from four (in 1) to eight (in 1') and then decreased to six (in 2). Most interestingly, permanent porosity could be observed for the dihydrate 2, originated from potential void space as substantiated by dinitrogen (N2) sorption isotherm. These porous frameworks were active catalysts for the aerobic epoxidation of the model substrate cyclohexene using molecular oxygen (O2) as the final oxidant in the presence of the sacrificial i-butyraldehyde (IBA) reductant. For using the dihydrous phase 2, cyclohexene and various other olefins were catalytically oxidised to their corresponding epoxides with up to 38.5% conversion and 99.0% selectivity. The catalyst 2 can be expediently recycled in four runs without significant loss of activity. This research demonstrates that a little innovation in the active-site-engineered organic-inorganic hybrid materials can significantly enhance the catalytic performance and selectivity of coordination polymer-derived heterogeneous catalysts.

Extrusion Printing of Surface-Functionalized Metal-Organic Framework Inks for a High-Performance Wearable Volatile Organic Compound Sensor

Wearable sensors hold immense potential for real-time and non-destructive sensing of volatile organic compounds (VOCs), requiring both efficient sensing performance and robust mechanical properties. However, conventional colorimetric sensor arrays, acting as artificial olfactory systems for highly selective VOC profiling, often fail to meet these requirements simultaneously. Here, a high-performance wearable sensor array for VOC visual detection is proposed by extrusion printing of hybrid inks containing surface-functionalized sensing materials. Surface-modified hydrophobic polydimethylsiloxane (PDMS) improves the humidity resistance and VOC sensitivity of PDMS-coated dye/metal-organic frameworks (MOFs) composites. It also enhances their dispersion within liquid PDMS matrix, thereby promoting the hybrid liquid as high-quality extrusion-printing inks. The inks enable direct and precise printing on diverse substrates, forming a uniform and high particle-loading (70 wt%) film. The printed film on a flexible PDMS substrate demonstrates satisfactory flexibility and stretchability while retaining excellent sensing performance from dye/MOFs@PDMS particles. Further, the printed sensor array exhibits enhanced sensitivity to sub-ppm VOC levels, remarkable resistance to high relative humidity (RH) of 90%, and the differentiation ability for eight distinct VOCs. Finally, the wearable sensor proves practical by in situ monitoring of wheat scab-related VOC biomarkers. This study presents a versatile strategy for designing effective wearable gas sensors with widespread applications.

Dual-functional metal-organic framework for chemisorption and colorimetric monitoring of cyanogen chloride

Given the growing concern over the deployment of toxic chemicals in warfare, the rapid and accurate removal and detection of cyanogen chloride (CK) as a blood agent has become increasingly critical. However, conventional physisorbents and chemisorbents used in military respirators are insufficient for the effective removal of CK. In this study, we demonstrate the chemisorption and sensing abilities of Co2(m-DOBDC) (m-DOBDC4- = 4,6-dioxo-1,3-benzenedicarboxylate) for CK via electrophilic aromatic substitution (EAS) in humid environments. Unlike the chemisorption in triethylenediamine (TEDA) impregnated carbon materials, which generates by-products through hydrolysis, the electron-rich C5 sites in m-DOBDC4- ligands give rise to cyano substitution with CK. This leads to the formation of stable C-C bonds and chloride ions (Cl-) coordinating with open Co2+ sites. Such a mechanism prevents the generation of toxic by-products like cyanic acid and hydrochloric acid. Breakthrough experiments conducted in a packed-bed system conclusively demonstrated the superior CK removal capacity of Co2(m-DOBDC) (1662 min/g), compared to TEDA-impregnated activated carbon (323 min/g) under humid conditions. Considering that MOF-74 series, isostructural with Co2(m-DOBDC), barely adsorb CK under similar conditions, this finding marks a significant advancement in developing novel sorbents for CK removal. Moreover, this chemisorption not only exhibited rapid and highly efficient CK removal but also enabled colorimetric monitoring via the distinctive color change induced by the coordination of Cl- acting as σ donors. These findings facilitate the development of adsorption and sensing equipment to protect military personnel from toxic chemical threats.

Recent Advances in Pristine Iron Triad Metal-Organic Framework Cathodes for Alkali Metal-Ion Batteries

Pristine iron triad metal-organic frameworks (MOFs), i.e., Fe-MOFs, Co-MOFs, Ni-MOFs, and heterometallic iron triad MOFs, are utilized as versatile and promising cathodes for alkali metal-ion batteries, owing to their distinctive structure characteristics, including modifiable and designable composition, multi-electron redox-active sites, exceptional porosity, and stable construction facilitating rapid ion diffusion. Notably, pristine iron triad MOFs cathodes have recently achieved significant milestones in electrochemical energy storage due to their exceptional electrochemical properties. Here, the recent advances in pristine iron triad MOFs cathodes for alkali metal-ion batteries are summarized. The redox reaction mechanisms and essential strategies to boost the electrochemical behaviors in associated electrochemical energy storage devices are also explored. Furthermore, insights into the future prospects related to pristine iron triad MOFs cathodes for lithium-ion, sodium-ion, and potassium-ion batteries are also delivered.

Double-walled Al-based MOF with large microporous specific surface area for trace benzene adsorption

Double-walled metal-organic frameworks (MOFs), synthesized using Zn and Co, are potential porous materials for trace benzene adsorption. Aluminum is with low-toxicity and abundance in nature, in comparison with Zn and Co. Therefore, a double-walled Al-based MOF, named as ZJU-520(Al), with large microporous specific surface area of 2235 m2 g-1, pore size distribution in the range of 9.26-12.99 Å and excellent chemical stability, was synthesized. ZJU-520(Al) is consisted by helical chain of AlO6 clusters and 4,6-Di(4-carboxyphenyl)pyrimidine ligands. Trace benzene adsorption of ZJU-520(Al) is up to 5.98 mmol g-1 at 298 K and P/P0 = 0.01. Adsorbed benzene molecules are trapped on two types of sites. One (site I) is near the AlO6 clusters, another (site II) is near the N atom of ligands, using Grand Canonical Monte Carlo simulations. ZJU-520(Al) can effectively separate trace benzene from mixed vapor flow of benzene and cyclohexane, due to the adsorption affinity of benzene higher than that of cyclohexane. Therefore, ZJU-520(Al) is a potential adsorbent for trace benzene adsorption and benzene/cyclohexane separation.

Functionalization of Defective Zr Metal-Organic Frameworks for Water Decontamination: Mechanistic Insight into the Competitive Roles of -NH2 and -SH Sites in Removal of As(III) Species

Direct removal of trivalent arsenic, As(III), arsenite, or H3AsO3, is a great challenge in accessing clean sources of water. Different methodologies and materials were applied in this regard, but among them, direct removal of As(III) species using a metal-organic framework (MOF)-based adsorbent shows a great deal of potential. Although some studies were conducted on As(III) removal using MOFs, studies of functional groups are still quite rare. For this purpose, three novel functionalized defective Zr-MOFs, using UiO-66 [Zr6(OH)4O4(BDC)6, where BDC2- = benzene-1,4-dicarboxylate], were fabricated to investigate the competitive or cooperative roles of the free -NH2 and/or -SH site in the removal of As(III). UiO-66 was functionalized with monocarboxylate linkers, including glycine (Gly, NH2-CH2-COOH), cysteine [Cys, SH(CH2)-NH2(CH)-COOH], and mercaptopropionic acid [Mer, SH-(CH2)2-COOH]. Gly@UiO-66, Cys@UiO-66, and Mer@UiO-66 were applied for the direct removal of As(III) species. Although Cys@UiO-66 is functionalized with both amine and thiol functional groups, Gly@UiO-66 has a higher adsorption capacity (301.4 mg g-1) with respect to As(III), which is among the best reported values. This is due to the fact that (1) the affinity of amine sites in Gly@UiO-66 for As(III) is higher than that of thiol sites in Mer@UiO-66 and (2) Cys@UiO-66 has a very small surface area compared to that of Gly@UiO-66. Mechanistic studies using X-ray photoelectron spectroscopy and vibrational spectroscopy reveal that not only the functionalization and chemical nature of the function but also other parameters such as the protonation-deprotonation mechanisms and chemical state of the function are other critical factors for designing a functional MOF-based adsorbent with high affinity for and maximum capacity with respect to the target analyte.

Bimetallic Coordination Polymers: Synthesis and Applications in Biosensing and Biomedicine

Bimetallic coordination polymers (CPs) have two different metal ions as connecting nodes in their polymer structure. The synthesis methods of bimetallic CPs are mainly categorized into the one-pot method and post-synthesis modifications according to various needs. Compared with monometallic CPs, bimetallic CPs have synergistic effects and excellent properties, such as higher gas adsorption rate, more efficient catalytic properties, stronger luminescent properties, and more stable loading platforms, which have been widely applied in the fields of gas adsorption, catalysis, energy storage as well as conversion, and biosensing. In recent years, the study of bimetallic CPs synergized with cancer drugs and functional nanomaterials for the therapy of cancer has increasingly attracted the attention of scientists. This review presents the research progress of bimetallic CPs in biosensing and biomedicine in the last five years and provides a perspective for their future development.

Hydrophobic MOF/PDMS-Based QCM Sensors for VOCs Identification and Quantitative Detection in High-Humidity Environments

Metal-organic frameworks (MOFs) have great potential in quartz crystal microbalance (QCM) platforms for volatile organic compound (VOCs) detection and recognition due to their unique properties. However, the MOFs' hydrophilicity degrades performance in high-humidity environments, limiting reliable VOC sensing in complex environments. Herein, we propose a novel VOC virtual sensor array (VSA) using a single QCM sensor with an adsorption layer composed of MIL-101(Cr) MOF and polydimethylsiloxane (PDMS), realizing stable sensing and accurate identification for different VOCs under various relative humidity (RH) conditions. The hydrophobic PDMS layer improves the moisture resistance of the sensor to 4 and 14 times in terms of shifts in resonant frequency and scattering parameters, respectively. In addition, performance is maintained over 2 days of water treatment, demonstrating superior water resistance. The highest sensitivity of 2.68 mdB ppm-1 is achieved for isopropanol detection, with the lowest limit of detection of 20.06 ppm for acetone. Combining resonant signals and lumped parameters, the proposed VSA technique effectively discriminates four VOCs (ethanol, 2-propanol, acetone, and acetonitrile) with a high accuracy of 95.3% under both 60% and 90% RH backgrounds. The studies provide a promising solution for reliable low-concentration VOC detection using QCM sensors in high-humidity environments such as underground spaces.

Advances and Applications of Metal-Organic Frameworks (MOFs) in Emerging Technologies: A Comprehensive Review

Metal-organic frameworks (MOFs) that are the wonder material of the 21st century consist of metal ions/clusters coordinated to organic ligands to form one- or more-dimensional porous structures with unprecedented chemical and structural tunability, exceptional thermal stability, ultrahigh porosity, and a large surface area, making them an ideal candidate for numerous potential applications. In this work, the recent progress in the design and synthetic approaches of MOFs and explore their potential applications in the fields of gas storage and separation, catalysis, magnetism, drug delivery, chemical/biosensing, supercapacitors, rechargeable batteries and self-powered wearable sensors based on piezoelectric and triboelectric nanogenerators are summarized. Lastly, this work identifies present challenges and outlines future opportunities in this field, which can provide valuable references.

Gas-responsive two-dimensional metal-organic framework composites for trace visualization of volatile organic compounds

Highly sensitive and specific identification of complex volatile organic compound mixtures has always been a huge challenge in the field of gas detection. To address this issue, the gas-responsive two-dimensional metal-organic framework (MOF) composites have been designed for fabricating a colorimetric sensor arrays for extremely sensitive detection of volatile organic compounds (VOCs). The physically exfoliated MOF nanosheets Zn2(bim)4 with large surface area and abundant unsaturated active sites were used for loading various dyes to form dye/Zn2(bim)4 composites. Due to the protective effect on dye activity and preconcentration for VOCs, the dye/Zn2(bim)4 composites-based colorimetric sensor arrays showed significantly enhanced sensitivity compared with the corresponding dyes for the detection of various VOCs. The mechanical flexibility of the dye/MOF nanosheets endowed the excellent film-forming properties on various substrates for fabricating the colorimetric sensor arrays. Besides owing to the hydrophobic property and the protection of the Zn2(bim)4 nanosheets, the dye/Zn2(bim)4 sensor arrays exhibited excellent anti-interference including humidity and temperature influence. On the basis of the fantastic properties of dye/Zn2(bim)4 composites for VOCs detection, the dye/Zn2(bim)4 sensor arrays were applied for the early perception of the plant disease late blight via ultra-sensitive and highly specific sensing the VOCs released from the infected plants.

Boosted ability of ZIF-8 for early-stage adsorption and degradation of chemical warfare agent simulants

Efficient adsorption of hazardous substances from the environment is crucial owing to the considerable risks they pose to both humans and ecosystems. Consequently, the development of porous materials with strong adsorption capabilities for hazardous substances, such as chemical warfare agents (CWAs), is pivotal for safeguarding human lives. Specifically, the early-stage adsorption proficiency of the adsorbents plays a vital role in determining their effectiveness as ideal adsorbents. Herein, we report the efficient adsorption of CWA simulants using thermally treated ZIF-8 (T-ZIF-8). The T-ZIF-8 samples were prepared by subjecting ZIF-8 to a simple thermal treatment, which resulted in a more positive surface charge with extra open metal sites. Although the pore volume of T-ZIF-8 decreased after thermal treatment, the positive surface charge of T-ZIF-8 proved advantageous for the adsorption of the CWA simulants. As a result, the adsorption capacity of T-ZIF-8 for the CWA simulants improved compared to that of pure ZIF-8. Notably, T-ZIF-8 exhibited a remarkably enhanced adsorption ability in the early stage of exposure to the CWA simulants, possibly due to the effective polar interactions between T-ZIF-8 and the simulants via the electron-rich components within the CWA simulants. Moreover, the enhanced adsorption capacity of T-ZIF-8 led to the fast degradation of simulant compared to pure ZIF-8. T-ZIF-8 also demonstrated excellent stability over three adsorption cycles. These findings highlight that T-ZIF-8 is an outstanding material for the early-stage adsorption and degradation of CWA simulants, offering high effectiveness and stability.

Transmission Porosimetry Study on High-quality Zr-fum-MOF Thin Films

Crystalline Zr-fum-MOF (MOF-801) thin films of high quality are prepared on glass and silicon substrates by direct growth under solvothermal conditions. The synthesis is described in detail and the influence of different synthesis parameters such as temperature, precursor concentration, and the substrate type on the quality of the coatings is illustrated. Zr-fum-MOF thin films are characterized in terms of crystallinity, porosity, and homogeneity. Dense films of optical quality are obtained. The sorption behavior of the thin films is studied with various adsorptives. It can be easily monitored by measuring the transmission of the films in gas flows of different compositions. This simple transmission measurement at only one wavelength allows a very fast evaluation of the adsorption properties of thin films as compared to traditional sorption methods. The sorption behavior of the thin films is compared with the sorption properties of Zr-fum-MOF powder samples.

Rapid Detection and Selective Extraction of Au(III) from Electronic Waste Using an Oxime Functionalized MOF-on-MOF Heterostructure

Gold is not only a precious resource for many industries but also a global contaminant as a result of the discharge of gold-containing waste. Designing appropriate materials for the detection and extraction of gold is of great significance for the economy and environment. However, most reports only focus on sensing or adsorption for gold because of the difficulty of combining two functions in a single material. Herein, an oxime-functionalized MOF-on-MOF heterostructure (MOF-808@ZIF-90-XE) for the simultaneous detection and recovery of Au3+ is first demonstrated. The constructed hybrid material exhibits good stability, ultra-fast response time (3.6 s) as well as excellent sensitivity for the detection of Au3+ . Experimental characterizations and theoretical calculations suggest that dynamic quenching and competitive adsorption may be possible sensing mechanisms. In addition, MOF-808@ZIF-90-XE shows outstanding selectivity and admirable adsorption capacity (1575 mg g-1 ) for the capture of Au3+ owing to high surface area and abundant active adsorption sites. This paper provides a new strategy by designing a hybrid MOF-on-MOF heterostructure for the detection and extraction of gold.

Defective MOF-74 with ancillary open metal sites for the enhanced adsorption of chemical warfare agent simulants

The development of effective porous adsorbents plays a vital role in eliminating hazardous substances from the environment. Toxic chemicals, including chemical warfare agents (CWAs), pose significant risks to both humans and ecosystems, highlighting the urgency to create efficient porous adsorbents. Therefore, substantial attention has been directed towards advancing adsorption techniques for the successful eradication of CWAs from the environment. Herein, we demonstrate a rational approach for enhancing the adsorption capability of a porous metal-organic framework (MOF) by employing ancillary open metal sites within the MOF structure. To generate defective MOF-74 (D-MOF-74) with ancillary open metal sites, some of the 2,5-dihydroxy-1,4-bezenedicarboxylic acid (DHBDC) linkers originally present in the MOF-74 structure were replaced with 1,4-benzenedicarboxylic acid (BDC) linkers. The absence of hydroxyl groups in the BDC linkers compared to the original DHBDC linkers creates ancillary open metal sites, which enhance the adsorption ability of D-MOF-74 for CWA simulants such as dimethyl methyl phosphonate, 2-chloroethyl ethyl sulfide, and methyl salicylate by providing effective interaction sites for the targeted molecules. However, excessive creation of open metal sites causes the collapse of the originally well-developed MOF-74 structure, resulting in a substantial reduction in its empty space and a subsequent decline in adsorption efficiency. Thus, to produce a defective MOF with the best performance, it is necessary to replace an appropriate amount of organic linker and create suitable open metal sites. Moreover, D-MOF-74 displays excellent recyclability during consecutive adsorption cycles without losing its original structure and morphology, suggesting that D-MOF-74 is an effective and stable material for the removal of CWA simulants.

Current trends in the detection and removal of heavy metal ions using functional materials

The shortage of freshwater resources caused by heavy metal pollution is an acute global issue, which has a great impact on environmental protection and human health. Therefore, the exploitation of new strategies for designing and synthesizing green, efficient, and economical materials for the detection and removal of heavy metal ions is crucial. Among the various methods for the detection and removal of heavy ions, advanced functional systems including nanomaterials, polymers, porous materials, and biomaterials have attracted considerable attention over the past several years due to their capabilities of real-time detection, excellent removal efficiency, anti-interference, quick response, high selectivity, and low limit of detection. In this tutorial review, we review the general design principles underlying the aforementioned functional materials, and in particular highlight the fundamental mechanisms and specific examples of detecting and removing heavy metal ions. Additionally, the methods which enhance water purification quality using these functional materials have been reviewed, also current challenges and opportunities in this exciting field have been highlighted, including the fabrication, subsequent treatment, and potential future applications of such functional materials. We envision that this tutorial review will provide invaluable guidance for the design of functional materials tailored towards the detection and removal of heavy metals, thereby expediting the development of high-performance materials and fostering the development of more efficient approaches to water pollution remediation.

A robust ultra-microporous cationic aluminum-based metal-organic framework with a flexible tetra-carboxylate linker

Al-based cationic metal-organic frameworks (MOFs) are uncommon. Here, we report a cationic Al-MOF, MIP-213(Al) ([Al₁₈(μ₂-OH)₂₄(OH₂)₁₂(mdip)₆]6Cl·6H₂O) constructed from flexible tetra-carboxylate ligand (5,5'-Methylenediisophthalic acid; H₄mdip). Its crystal structure was determined by the combination of three-dimensional electron diffraction (3DED) and high-resolution powder X-ray diffraction. The structure is built from infinite corner-sharing chains of AlO₄(OH)₂ and AlO₂(OH)₃(H₂O) octahedra forming an 18-membered rings honeycomb lattice, similar to that of MIL-96(Al), a scarce Al-polycarboxylate defective MOF. Despite sharing these structural similarities, MIP-213(Al), unlike MIL-96(Al), lacks the isolated μ₃-oxo-bridged Al-clusters. This leads to an ordered defective cationic framework whose charge is balanced by Cl^- sandwiched between two Al-trimers at the corner of the honeycomb, showing strong interaction with terminal H₂O coordinated to the Al-trimers. The overall structure is endowed by a narrow quasi-1D channel of dimension ~4.7 Å. The Cl^- in the framework restrains the accessibility of the channels, while the MOF selectively adsorbs CO₂ over N₂ and possesses high hydrolytic stability.

Photo-Activated Direct Catalytic Oxidation of Gaseous Benzene with a Cu-Connected Serial Heterojunction Array of Co3 O4 /Cux O/Foam Cu Assembled via Layer upon Layer Oxidation

The foam copper (FCu) has been first used as a promising supporting material to prepare a photo-activated catalyst of Co₃ O₄ /Cu_x O/FCu, in which the fine Co₃ O₄ particles are inlayed on the Cu_x O nanowires to form a Z-type heterojunction array connected by substrate Cu. The prepared samples have been used as a photo-activated catalyst to directly decompose gaseous benzene and the optimized Co₃ O₄ /Cu_x O/FCu demonstrates a 99.5% removal efficiency and 100% mineralizing rate within 15 min in benzene concentration range from 350 to 4000 ppm under simulate solar light irradiation. To track the reactive mechanism, a series of MO_x /Cu_x O/FCu (M = Mn, Fe, Co, Ni, Cu, Zn) is prepared and a novel photo-activated direct catalytic oxidation route is proposed based on the comparative investigation of material properties. Moreover, the approach grew in situ via layer upon layer oxidation on FCu dedicates to the extra lasting reusability and the easy accessibility in the diverse situations. This work provides a novel strategy for the preparation of Cu connected series multidimensional heterojunction array and a promising application for the quick abatement of the high-leveled concentration gaseous benzene and its derivatives from the industrial discharged flow or the accident scene's leakage.

A Novel Aluminum-Based Metal-Organic Framework with Uniform Micropores for Trace BTEX Adsorption

Metal-organic frameworks (MOFs) are potential porous adsorbents for benzene, toluene, ethylbenzene and xylene (BTEX). A novel MOF, using low toxic aluminum (Al) as the metal, named as ZJU-620(Al), with uniform micropore size of 8.37±0.73 Å and specific surface area of 1347 m²  g^-1 , was synthesized. It is constructed by one-dimensional rod-shaped AlO₆ clusters, formate ligands and 4,4',4''-(2,4,6-trimethylbenzene-1,3,5-triyl) tribenzoic ligands. ZJU-620(Al) exhibits excellent chemical-thermal stability and adsorption for trace BTEX, e.g., benzene adsorption of 3.80 mmol g^-1 at P/P₀ =0.01 and 298 K, which is the largest one reported. Using Grand Canonical Monte Carlo simulations and Single-crystal X-ray diffraction analyses, it was observed that the excellent adsorption could be attributed to the high affinity of BTEX molecules in ZJU-620(Al) micropores because the kinetic diameters of BTEX are close up to the pore size of ZJU-620(Al).

Novel ammonia-responsive carboxymethyl cellulose/Co-MOF multifunctional films for real-time visual monitoring of seafood freshness

Nowadays, ammonia-responsive biopolymer-based intelligent active films are of great interest for their huge potential in maintaining and monitoring the freshness of seafood. However, it is still a challenge to create biopolymer-based intelligent active films with favorable color stability, antibacterial and visual freshness indication functions. Herein, cobalt-based metal-organic framework (Co-MOF) nanosheets with ammonia-sensitive and antibacterial functions were successfully synthesized and then embedded into carboxymethyl cellulose (CMC) matrix to develop high performance and multifunctional CMC-based intelligent active films. The influence of Co-MOF addition on the structure, physical and functional characters of CMC film was comprehensively studied. The results showed that the Co-MOF nanofillers were homogeneously embedded within the CMC matrix, bringing about remarkable promotion on tensile strength (from 45.3 to 62.2 MPa), toughness (from 0.7 to 2.3 MJ/m³), water barrier and UV-blocking performance of CMC film. Notably, the obtained CMC/Co-MOF nanocomposite films also presented excellent long-term color stability, antibacterial activity (with the bacteriostatic efficiency of 99.6 % and 99.3 % against Escherichia coli and Staphylococcus aureus), and ammonia-sensitive discoloration performance. Finally, the CMC/Co-MOF nanocomposite films were successfully applied for real-time visual monitoring of shrimp freshness. The above results demonstrate that the CMC/Co-MOF nanocomposite films possess huge potential applications in intelligent active packaging.

In-Memory-Computed Low-Frequency Noise Spectroscopy for Selective Gas Detection Using a Reducible Metal Oxide

Concerns about indoor and outdoor air quality, industrial gas leaks, and medical diagnostics are driving the demand for high-performance gas sensors. Owing to their structural variety and large surface area, reducible metal oxides hold great promise for constructing a gas-sensing system. While many earlier reports have successfully obtained a sufficient response to various types of target gases, the selective detection of target gases remains challenging. In this work, a novel method, low-frequency noise (LFN) spectroscopy is presented, to achieve selective detection using a single FET-type gas sensor. The LFN of the sensor is accurately modeled by considering the charge fluctuation in both the sensing material and the FET channel. Exposure to different target gases produces distinct corner frequencies of the power spectral density that can be used to achieve selective detection. In addition, a 3D vertical-NAND flash array is used with the fast Fourier transform method via in-memory-computing, significantly improving the area and power efficiency rate. The proposed system provides a novel and efficient method capable of selectively detecting a target gas using in-memory-computed LFN spectroscopy and thus paving the way for the further development in gas sensing systems.

Toxin-Blocking Textiles: Rapid, Benign, Roll-to-Roll Production of Robust MOF-Fabric Composites for Organophosphate Separation and Hydrolysis

Current approaches to create zirconium-based metal-organic framework (MOF) fabric composites for catalysis, water purification, wound healing, gas sorption, and other applications often rely on toxic solvents, long reaction/post processing times, and batch methods hindering process scalability. Here, a novel mechanism was reported for rapid UiO-66-NH₂ synthesis in common low-boiling-point solvents (water, ethanol, and acetic acid) and revealed acid-base chemistry promoting full linker dissolution and vapor-based crystallization. The mechanism enabled scalable roll-to-roll production of mechanically resilient UiO-66-NH₂ fabrics with superior chemical protective capability. Solvent choice and segregated spray delivery of organic linker and metal salt MOF precursor solutions allowed for rapid MOF nucleation on the fiber surface and decreased the energy and time needed for post-processing, producing an activated composite in less than 165 min, far outpacing conventional MOF-fabric synthesis approaches. The MOF-fabric hydrolyzed and blocked permeation of the chemical warfare agent soman, outperforming the protection-standard activated carbon cloth. This work presents both chemical insights into Zr-MOF powder and fabric composite formation by a rapid, industrially relevant approach and demonstrates its practicality and affordability for high-performing personal protective equipment.

Confinement-Driven Photophysics in Hydrazone-Based Hierarchical Materials

Confinement-imposed photophysics was probed for novel stimuli-responsive hydrazone-based compounds demonstrating a conceptual difference in their behavior within 2D versus 3D porous matrices for the first time. The challenges associated with photoswitch isomerization arising from host interactions with photochromic compounds in 2D scaffolds could be overcome in 3D materials. Solution-like photoisomerization rate constants were realized for sterically demanding hydrazone derivatives in the solid state through their coordinative immobilization in 3D scaffolds. According to steady-state and time-resolved photophysical measurements and theoretical modeling, this approach provides access to hydrazone-based materials with fast photoisomerization kinetics in the solid state. Fast isomerization of integrated hydrazone derivatives allows for probing and tailoring resonance energy transfer (ET) processes as a function of excitation wavelength, providing a novel pathway for ET modulation.

Quasi-Cu-MOFs: highly improved water stability and electrocatalytic activity toward H2O2 reduction among pristine 3D MOFs

QHKUST-1 calcined at 250 °C for 1 h maintains the perfect octahedral morphology of HKUST-1 and exhibits superior moisture stability and enhanced electrocatalytic activity compared to the original water-sensitive HKUST-1.

Ionic metal-organic frameworks (iMOFs): progress and prospects as ionic functional materials

Metal-organic frameworks (MOFs) have been a research hotspot for the last two decades, witnessing an extraordinary upsurge across various domains in materials chemistry. Ionic MOFs (both anionic and cationic MOFs) have emerged as next-generation ionic functional materials and are an important subclass of MOFs owing to their ability to generate strong electrostatic interactions between their charged framework and guest molecules. Furthermore, the presence of extra-framework counter-ions in their confined nanospaces can serve as additional functionality in these materials, which endows them a significant advantage in specific host-guest interactions and ion-exchange-based applications. In the present review, we summarize the progress and future prospects of iMOFs both in terms of fundamental developments and potential applications. Furthermore, the design principles of ionic MOFs and their state-of-the-art ion exchange performances are discussed in detail and the future perspectives of these promising ionic materials are proposed.

Airborne Toluene Detection Using Metal-Organic Frameworks

The pollution of indoor air is a major worldwide concern in our modern society for people's comfort, health, and safety. In particular, toluene, present in many substances including paints, thinners, candles, leathers, cosmetics, inks, and glues, affects the human health even at very low concentrations throughout its action on the central nervous system. Its prevalence in many workplace environments can fluctuate considerably, which led to firm regulation with exposure limits varying between 50 and 400 ppm depending on exposure time. This therefore requires the development of technologies for an accurate detection of this contaminant. Metal-organic frameworks have been proposed as promising candidates to detect and monitor a series of molecules at even extremely low concentrations owing to the high tunability of their functionality. Herein, a high-throughput Monte Carlo screening approach was devised to identify the best MOFs from the computation-ready, experimental (CoRE) metal-organic framework (MOF) density-derived electrostatic and chemical (DDEC) database for the selective capture of toluene from air at room temperature, with the consideration of a ternary mixture composed of extremely low-level concentration of toluene (10 ppm) in oxygen and nitrogen to mimic the composition of air. An aluminum MOF, DUT-4, with channel-like micropores was identified as an excellent candidate for the selective adsorption of toluene from air with a predicted adsorption uptake of 0.5 g/g at 10 ppm concentration and room temperature. The toluene adsorption behavior of DUT-4 at low equivalent concentrations, alongside its sensing performance, was further experimentally investigated by its incorporation in a quartz crystal microbalance sensor, confirming the promises of DUT-4. Decisively, the resulting high sensitivity and fast kinetics of our developed sensor highlight the applicability of this hand-in-hand computational-experimental methodology to porous material screening for sensing applications.

Coordination Polymers Constructed from an Adaptable Pyridine-Dicarboxylic Acid Linker: Assembly, Diversity of Structures, and Catalysis

4,4'-(Pyridine-3,5-diyl)dibenzoic acid (H₂pdba) was explored as an adaptable linker for assembling a diversity of new manganese(II), cobalt(II/III), nickel(II), and copper(II) coordination polymers (CPs): [Mn(μ₄-pdba)(H₂O)]_n (1), {[M(μ₃-pdba)(phen)]·2H₂O}_n (M = Co (2), Ni (3)), {[Cu₂(μ₃-pdba)₂(bipy)]·2H₂O}_n (4), {[Co(μ₃-pdba)(bipy)]·2H₂O}_n (5), [Co₂(μ₃-pdba)(μ-Hbiim)₂(Hbiim)]_n (6), and [M(μ₄-pdba)(py)]_n (M = Co (7), Ni (8)). The CPs were hydrothermally synthesized using metal(II) chloride precursors, H₂pdba, and different coligands functioning as crystallization mediators (phen: 1,10-phenanthroline; bipy: 2,2'-bipyridine, H₂biim: 2,2'-biimidazole; py: pyridine). Structural networks of 1-8 range from two-dimensional (2D) metal-organic layers (1-3, 5-8) to three-dimensional (3D) metal-organic framework (MOF) (4) and disclose several types of topologies: sql (in 1), hcb (in 2, 3, 5), tfk (in 4), 3,5L66 (in 6), and SP 2-periodic net (6,3)Ia (in 7, 8). Apart from the characterization by standard methods, catalytic potential of the obtained CPs was also screened in the Knoevenagel condensation of benzaldehyde with propanedinitrile to give 2-benzylidenemalononitrile (model reaction). Several reaction parameters were optimized, and the substrate scope was explored, revealing the best catalytic performance for a 3D MOF 4. This catalyst is recyclable and can lead to substituted dinitrile products in up to 99% product yields. The present study widens the use of H₂pdba as a still poorly studied linker toward designing novel functional coordination polymers.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

An overview on recent progress in photocatalytic air purification: Metal-based and metal-free photocatalysis

Air pollution is becoming a distinctly growing concern and the most pressing universal problem as a result of increased energy consumption, with the multiplication of the human population and industrial enterprises, resulting in the generation of hazardous pollutants. Among these, carbon monoxide, nitrogen oxides, Volatile organic compounds, Semi volatile organic compounds, and other inorganic gases not only have an adverse impact on human health both outdoors and indoors, but have also substantially altered the global climate, resulting in several calamities around the world. Thus, the purification of air is a crucial matter to deal with. Photocatalytic oxidation is one of the most recent and promising technologies, and it has been the subject of numerous studies over the past two decades. Hence, the photocatalyst is the most reassuring aspirant due to its adequate bandgap and exquisite stability. The process of photocatalysis has provided many benefits to the atmosphere by removing pollutants. In this review, our work focuses on four main themes. Firstly, we briefly elaborated on the general mechanism of air pollutant degradation, followed by an overview of the typical TiO₂ photocatalyst, which is the most researched photocatalyst for photocatalytic destruction of gaseous VOCs. The influence of operating parameters influencing the process of photocatalytic oxidation (such as mass transfer, light source and intensity, pollutant concentration, and relative humidity) was then summarized. Afterwards, the progress and drawbacks of some typical photoreactors (including monolithic reactors, microreactors, optical fiber reactors, and packed bed reactors) were described and differentiated. Lastly, the most noteworthy coverage is dedicated to different types of modification strategies aimed at ameliorating the performance of photocatalysts for degradation of air pollutants, which were proposed and addressed. In addition, the review winds up with a brief deliberation for more exploration into air purification photocatalysis.

Collagen Fiber-Based Advanced Separation Materials: Recent Developments and Future Perspectives

Separation plays a critical role in a broad range of industrial applications. Developing advanced separation materials is of great significance for the future development of separation technology. Collagen fibers (CFs), the typical structural proteins, exhibit unique structural hierarchy, amphiphilic wettability, and versatile chemical reactivity. These distinctive properties provide infinite possibilities for the rational design of advanced separation materials. During the past 2 decades, many progressive achievements in the development of CFs-derived advanced separation materials have been witnessed already. Herein, the CFs-based separation materials are focused on and the recent progresses in this topic are reviewed. CFs widely existing in animal skins display unique hierarchically fibrous structure, amphiphilicity-enabled surface wetting behaviors, multi-functionality guaranteed covalent/non-covalent reaction versatility. These outstanding merits of CFs bring great opportunities for realizing rational design of a variety of advanced separation materials that were capable of achieving high-performance separations to diverse specific targets, including oily pollutants, natural products, metal ions, anionic contaminants and proteins, etc. Besides, the important issues for the further development of CFs-based advanced separation materials are also discussed.

The Complexity of Comparative Adsorption of C6 Hydrocarbons (Benzene, Cyclohexane, n-Hexane) at Metal-Organic Frameworks

The relatively stable MOFs Alfum, MIL-160, DUT-4, DUT-5, MIL-53-TDC, MIL-53, UiO-66, UiO-66-NH₂, UiO-66(F)₄, UiO-67, DUT-67, NH₂-MIL-125, MIL-125, MIL-101(Cr), ZIF-8, ZIF-11 and ZIF-7 were studied for their C₆ sorption properties. An understanding of the uptake of the larger C₆ molecules cannot simply be achieved with surface area and pore volume (from N₂ sorption) but involves the complex micropore structure of the MOF. The maximum adsorption capacity at p p₀^-1 = 0.9 was shown by DUT-4 for benzene, MIL-101(Cr) for cyclohexane and DUT-5 for n-hexane. In the low-pressure range from p p₀^-1 = 0.1 down to 0.05 the highest benzene uptake is given by DUT-5, DUT-67/UiO-67 and MIL-101(Cr), for cyclohexane and n-hexane by DUT-5, UiO-67 and MIL-101(Cr). The highest uptake capacity at p p₀^-1 = 0.02 was seen with MIL-53 for benzene, MIL-125 for cyclohexane and DUT-5 for n-hexane. DUT-5 and MIL-101(Cr) are the MOFs with the widest pore window openings/cross sections but the low-pressure uptake seems to be controlled by a complex combination of ligand and pore-size effect. IAST selectivities between the three binary mixtures show a finely tuned and difficult to predict interplay of pore window size with (critical) adsorptive size and possibly a role of electrostatics through functional groups such as NH₂.

Synthesis of Nitro Compounds from Nitrogen Dioxide Captured in a Metal-Organic Framework

Increasing levels of air pollution are driving the need for the development of new processes that take "waste-to-chemicals". Herein, we report the capture and conversion under ambient conditions of a major air pollutant, NO₂, using a robust metal-organic framework (MOF) material, Zr-bptc (H₄bptc = 3,3',5,5'-biphenyltetracarboxylic acid), comprising {Zr₆(μ₃-O)₄(μ₃-OH)₄(COO)₁₂} clusters linked by 4-connected bptc^4- ligands in an ftw topology. At 298 K, Zr-bptc shows exceptional stability and adsorption of NO₂ at both low (4.9 mmol g^-1 at 10 mbar) and high pressures (13.8 mmol g^-1 at 1.0 bar), as measured by isotherm experiments. Dynamic breakthrough experiments have confirmed the selective retention of NO₂ by Zr-bptc at low concentrations under both dry and wet conditions. The immobilized NO₂ can be readily transformed into valuable nitro compounds relevant to construction, agrochemical, and pharmaceutical industries. In situ crystallographic and spectroscopic studies reveal strong binding interactions of NO₂ to the {Zr₆(μ₃-O)₄(μ₃-OH)₄(COO)₁₂} cluster node. This study paves a circular pathway to enable the integration of nitrogen-based air pollutants into the production of fine chemicals.

Humidity-Independent Artificial Olfactory Array Enabled by Hydrophobic Core-Shell Dye/MOFs@COFs Composites for Plant Disease Diagnosis

As a class of important artificial olfactory system, the colorimetric sensor array possesses great potential for commercialization due to its cost-effectiveness and portability. However, when applied to practical applications, the humidity interference from ambient environment and dissatisfactory sensitivity for trace target VOCs are largely unsolved problems. To overcome the problems, we developed a series of dye/MOFs@COFs gas-sensing materials with core-shell structure using a hydrophobization strategy by encapsulation of dye/metal-organic frameworks (MOFs) into hydrophobic covalent organic frameworks (COFs). Benefiting from the hydrophobic property of the COF shell, the dye/MOFs@COFs composites were endowed with excellent humidity-resistance even under 100% relative humidity (RH). Moreover, due to the uniform distribution of dyes on the porous MOFs, the dye/MOFs@COFs sensors also exhibited improved sensitivity at the sub-ppm level, compared with conventional dye sensors. On basis of the excellent humidity-resistance and improved sensitivity, an artificial olfactory array based on dye/MOFs@COFs composites was proven to be a successful practical application in early and accurate detection of wheat scab (1 day after inoculation) by monitoring its released VOC markers. The synthetic strategy for core-shell dye/MOFs@COFs is applicable to a wide range of colorimetric sensor arrays, endowing them with excellent humidity-resistance and sensitivity for the feasibility of practical applications.

Modified Mn/ZSM-5 for Non-Thermal Plasma Mineralization of VOCs and DFT Simulation Using a Novel Y-Type ZSM-5 Model

Using a catalyst to mineralize volatile organic compounds (VOCs) in a Non-thermal Plasma (NTP) reactor is an effective method. In many kinds of catalysts for VOCs degradation, oxygen defect is a crucial factor affecting the catalytic activity. Three different methods (steaming, doping, plasma) were used to introduce possible oxygen defects into the Mn/ZSM-5 to prepare modified catalysts, which were evaluated in VOCs degradation activity using a Double Dielectric Barrier Discharge (DDBD) plasma device. Additionally, a novel Y-type ZSM-5 model was employed in the DFT simulation. The new Y-type ZSM-5 model used in this paper is a more realistic aperiodic model. It showed that introducing possible oxygen defects can substantially enhance degradation efficiency. Taking the catalyst with oxygen defects introduced by plasma as an example, the conversion (CO2 selectivity) of the methanol, acetone, and toluene could reach 100% (100%), 97.7% (99.1%), 91.2% (93.9%), respectively, at an initial concentration of 2000 ppm and specific input energy of 9 kJ/L. The results demonstrated that modification could significantly enhance the activity of the catalyst in decomposing VOCs at room temperature using non-thermal plasma catalysis. Theoretical simulation of density functional theory (DFT) revealed that the adsorption of adsorbate on the catalyst becomes easier after possible oxygen defects are introduced.

MOF/POM hybrids as catalysts for organic transformations

Insertion of molecular metal oxides, e.g. polyoxometalates (POMs), into metal-organic frameworks (MOFs) opens up new research opportunities in various fields, particularly in catalysis. POM/MOF composites have strong acidity, oxygen-rich surface, and redox capacity due to typical characteristics of POMs and the large surface area, highly organized structures, tunable pore size, and shape are due to MOFs. Such hybrid materials have gained a lot of attention due to astonishing structural features, and hence have potential applications in organic catalysis, sorption and separation, proton conduction, magnetism, lithium-ion batteries, supercapacitors, electrochemistry, medicine, bio-fuel, and so on. The exceptional chemical and physical characteristics of POMOFs make them useful as catalysts in simple organic transformations with high capacity and selectivity. Here, the thorough catalytic study starts with a brief introduction related to POMs and MOFs, and is followed by the synthetic strategies and applications of these materials in several catalytic organic transformations. Furthermore, catalytic conversions like oxidation, condensation, esterification, and some other types of catalytic reactions including photocatalytic reactions are discussed in length with their plausible catalytic mechanisms. The disadvantages of the POMOFs and difficulties faced in the field have also been explored briefly from our perspectives.

Adsorption of Sulfur Dioxide in Cu(II)-Carboxylate Framework Materials: The Role of Ligand Functionalization and Open Metal Sites

The development of efficient sorbent materials for sulfur dioxide (SO₂) is of key industrial interest. However, due to the corrosive nature of SO₂, conventional porous materials often exhibit poor reversibility and limited uptake toward SO₂ sorption. Here, we report high adsorption of SO₂ in a series of Cu(II)-carboxylate-based metal–organic framework materials. We describe the impact of ligand functionalization and open metal sites on the uptake and reversibility of SO₂ adsorption. Specifically, MFM-101 and MFM-190(F) show fully reversible SO₂ adsorption with remarkable capacities of 18.7 and 18.3 mmol g^–1, respectively, at 298 K and 1 bar; the former represents the highest reversible uptake of SO₂ under ambient conditions among all porous solids reported to date. In situ neutron powder diffraction and synchrotron infrared microspectroscopy enable the direct visualization of binding domains of adsorbed SO₂ molecules as well as host–guest binding dynamics. We have found that the combination of open Cu(II) sites and ligand functionalization, together with the size and geometry of metal–ligand cages, plays an integral role in the enhancement of SO₂ binding.

Benchmarking various types of partial atomic charges for classical all-atom simulations of metal-organic frameworks

The density derived electrostatic and chemical (DDEC) approach for calculating the charges of atoms in a metal-organic framework (MOF) is considered to be the most accurate (yet computationally costly) one among many charge-assignment methods. Here, we conducted a comparative study on five different types of atomic partial charges (namely CM5, Mulliken, Qeq, EQeq and PACMOF) prepared for a subset of MOFs with affordable computational costs and benchmarked them with respect to the DDEC charges, which is particularly relevant because currently most databases lack MOFs with pre-calculated DDEC charges. To find a suitable charge type alternative to the DDEC approach, we statistically ranked the five charge types based on two metrics, the relative standard deviation of charges and relative dipole moment difference, based on which we provide general guidance as well as suggestions for specific MOFs according to bond polarity analyses. Finally, we recommend a possible and more accurate parametrization scheme for future studies.

Research Progress of a Composite Metal Oxide Catalyst for VOC Degradation

Volatile organic compounds (VOCs) are atmospheric pollutants that have been of concern for researchers in recent years because they are toxic, difficult to remove, and widely sourced and easily cause damage to the environment and human body. Most scholars use low-temperature plasma biological treatment, catalytic oxidation, adsorption, condensation, and recovery techniques to treat then effectively. Among them, catalytic oxidation technology has the advantages of a high catalytic efficiency, low energy consumption, high safety factor, high treatment efficiency, and less secondary pollution; it is currently widely used for VOC degradation technology. In this paper, the catalytic oxidation technology for the degradation of multiple types of VOCs as well as the development of a single metal oxide catalyst have been briefly introduced. We also focus on the research progress of composite metal oxide catalysts for the removal of VOCs by comparing and analyzing the metal component ratio, preparation method, and types of precursors and the catalysts' influence on the catalytic performance. In addition, the reason for catalyst deactivation and a correlation between the chemical state of the catalyst and the electron distribution are discussed. Development of a composite metal oxide catalyst for the catalytic oxidation of VOCs has been proposed.

VOC Mixture Sensing with a MOF Film Sensor Array: Detection and Discrimination of Xylene Isomers and Their Ternary Blends

Detection and recognition of volatile organic compounds (VOCs) are crucial in many applications. While pure VOCs can be detected by various sensors, the discrimination of VOCs in mixtures, especially of similar molecules, is hindered by cross-sensitivities. Isomer identification in mixtures is even harder. Metal-organic frameworks (MOFs) with their well-defined, nanoporous, and versatile structures have the potential to improve the VOC sensing performance by tailoring the adsorption affinities. Here, we detect and identify ternary xylene isomer mixtures by using an array of six gravimetric, quartz crystal microbalance (QCM)-based sensors coated with selected MOF films with different isomer affinities. We use classical molecular simulations to provide insights into the sensing mechanism. In addition to the attractive interaction between the analytes and the MOF film, the isomer discrimination is caused by the rigid crystalline framework sterically controlling the access of the isomers to different adsorption sites in the MOFs. The sensor array has a very low limit of detection of 1 ppm for each pure isomer and allows the isomer discrimination in mixtures. At 100 ppm, 16 different ternary o-p-m-xylene mixtures were identified with high classification accuracy (96.5%). This work shows the unprecedented performance of MOF-sensor arrays, also referred to as MOF-electronic nose (MOF-e-nose), for sensing VOC mixtures. Based on the study, guidelines for detecting and discriminating complex mixtures of volatile molecules are also provided.

Trace removal of benzene vapour using double-walled metal-dipyrazolate frameworks

In principle, porous physisorbents are attractive candidates for the removal of volatile organic compounds such as benzene by virtue of their low energy for the capture and release of this pollutant. Unfortunately, many physisorbents exhibit weak sorbate-sorbent interactions, resulting in poor selectivity and low uptake when volatile organic compounds are present at trace concentrations. Herein, we report that a family of double-walled metal-dipyrazolate frameworks, BUT-53 to BUT-58, exhibit benzene uptakes at 298 K of 2.47-3.28 mmol g^-1 at <10 Pa. Breakthrough experiments revealed that BUT-55, a supramolecular isomer of the metal-organic framework Co(BDP) (H₂BDP = 1,4-di(1H-pyrazol-4-yl)benzene), captures trace levels of benzene, producing an air stream with benzene content below acceptable limits. Furthermore, BUT-55 can be regenerated with mild heating. Insight into the performance of BUT-55 comes from the crystal structure of the benzene-loaded phase (C₆H₆@BUT-55) and density functional theory calculations, which reveal that C-H···X interactions drive the tight binding of benzene. Our results demonstrate that BUT-55 is a recyclable physisorbent that exhibits high affinity and adsorption capacity towards benzene, making it a candidate for environmental remediation of benzene-contaminated gas mixtures.

Noninvasive Diagnosis of Gastric Cancer Based on Breath Analysis with a Tubular Surface-Enhanced Raman Scattering Sensor

SERS-based breath analysis as an emerging technique has attracted increasing attention in cancer screening. Here, eight aldehydes and ketones in the human breath are reported as the VOC biomarkers identified by gas chromatography-mass spectrometry (GC-MS) and applied further for the noninvasive diagnosis of gastric cancer (GC) with a tubular SERS sensor. The tubular SERS sensor is prepared with a glass capillary loaded with ZIF-67-coated silver particles (Ag@ZIF-67), which offers Raman enhancement from the plasmonic nanoparticles and gas enrichment from the metal-organic framework (MOF) shells. The composite materials are modified with 4-aminothiophenol (4-ATP) to capture different aldehyde and ketone compounds. The tubular sensor is served simultaneously as a gas flow channel and a detection chamber, bringing a higher gas capture efficiency than the planar SERS sensor. As a proof-of-concept, the tubular SERS sensor is successfully employed to screen gastric cancer patients with an accuracy of 89.83%, based on the noninvasive, rapid, and easily operated breath analysis. The results demonstrate that the established breath analysis method provides an excellent alternative for the screening of GC and other diseases.

Stable Metal-Organic Frameworks for Fluorescent Detection of Tetracycline Antibiotics

The rapid detection of antibiotics in agricultural products is of great significance. In this work, two stable fluorescent metal-organic frameworks (MOFs), BUT-178 and BUT-179, are synthesized and used to detect tetracycline antibiotics. Among them, BUT-179 exhibits better performance in the detection of different tetracycline antibiotics in water and eggs. The limits of detection of BUT-179 toward tetracycline, aureomycin, oxytetracycline, and doxycycline all reach the nanomolar level. Furthermore, the cycling tests confirm that BUT-179 can be easily recovered and repeatedly used without an obvious performance loss. This work demonstrates the excellent application potential of MOFs for food safety, especially the fluorescence detection of antibiotics in foods.

Gas sensing based on metal-organic frameworks: Concepts, functions, and developments

Effective detection of pollutant gases is vital for protection of natural environment and human health. There is an increasing demand for sensing devices that are equipped with high sensitivity, fast response/recovery speed, and remarkable selectivity. Particularly, attention is given to the designability of sensing materials with porous structures. Among diverse kinds of porous materials, metal-organic frameworks (MOFs) exhibit high porosity, high degree of crystallinity and exceptional chemical activity. Their strong host-guest interactions with guest molecules facilitate the application of MOFs in adsorption, catalysis and sensing systems. In particular, the tailorable framework/composition and potential for post-synthetic modification of MOFs endow them with widely promising application in gas sensing devices. In this review, we outlined the fundamental aspects and applications of MOFs for gas sensors, and discussed various techniques of monitoring gases based on MOFs as functional materials. Insights and perspectives for further challenges faced by MOFs are discussed in the end.

MIL-101(Cr) MOF as an Effective Siloxane Sensor

Volatile methylsiloxanes (VMSs) are common silicone degradation byproducts that cause serious concern for the contamination of sensitive electronics and optics, among others. With the goal of fast, online detection of VMS, we herein highlight the mesoporous MIL-101(Cr) MOF as a promising mass sensing layer for integration with a quartz crystal microbalance (QCM), using an in-house modified gravimetric adsorption system capable of achieving extremely low concentrations of siloxane D4 (down to 0.04 ppm), targeting applications for monitoring in indoor spaces and spacecraft. Our developed MIL-101(Cr)@QCM sensor achieves near-perfect reversibility with no hysteresis alongside excellent repeatability over cycling and fast response/recovery times under 1 min. We attribute this capability to optimum host/guest interactions as uncovered through molecular simulations.

A Literature Review of Modelling and Experimental Studies of Water Treatment by Adsorption Processes on Nanomaterials

A significant growth in the future demand for water resources is expected. Hence researchers have focused on finding new technologies to develop water filtration systems by using experimental and simulation methods. These developments were mainly on membrane-based separation technology, and photocatalytic degradation of organic pollutants which play an important role in wastewater treatment by means of adsorption technology. In this work, we provide valuable critical review of the latest experimental and simulation methods on wastewater treatment by adsorption on nanomaterials for the removal of pollutants. First, we review the wastewater treatment processes that were carried out using membranes and nanoparticles. These processes are highlighted and discussed in detail according to the rate of pollutant expulsion, the adsorption capacity, and the effect of adsorption on nanoscale surfaces. Then we review the role of the adsorption process in the photocatalytic degradation of pollutants in wastewater. We summarise the comparison based on decomposition ratios and degradation efficiency of pollutants. Therefore, the present article gives an evidence-based review of the rapid development of experimental and theoretical studies on wastewater treatment by adsorption processes. Lastly, the future direction of adsorption methods on water filtration processes is indicated.

Fabrications and applications of hemicellulose-based bio-adsorbents

Super adsorbents exhibit great potential to remove pollutants from media or store considerable amounts of water, which may undermine the pressure triggered by environmental pollution and shortage of water resources. Super adsorbents made from biopolymers have been an attractive topic because of biodegradability, renewability and outstanding adsorption capacity. Hemicelluloses are a type of biopolymers very abundant in agricultural, forestry and pulping industrial wastes. Hemicellulose-based bio-adsorbents are thriving because the inherent chemical structures and physical properties of hemicelluloses make themselves easy to be processed into matrix materials applicable in super adsorbents. This review summarizes recent studies in hemicellulose-based bio-adsorbents, i.e. hydrogels and activated carbons, from the perspectives of types, applications, fabrication methods, the elements affecting the adsorption performance and the kinetics of adsorption process, which thus helps to further improve the properties of hemicellulose-based bio-adsorbents and to promote the industrial production and utilization of hemicelluloses and hemicellulose-based bio-adsorbents.