IR-Driven Ultrafast Transfer of Plasmonic Hot Electrons in Nonmetallic Branched Heterostructures for Enhanced H2 Generation

SERS Detection of Trace Carcinogenic Aromatic Amines Based on Amorphous MoO3 Monolayers

Aromatic amines are important commercial chemicals, but their carcinogenicity poses a threat to humans and other organisms, making their rapid quantitative detection increasingly urgent. Here, amorphous MoO3 (a-MoO3) monolayers with localized surface plasmon resonance (LSPR) effect in the visible region are designed for the trace detection of carcinogenic aromatic amine molecules. The hot-electron fast decay component of a-MoO3 decreases from 301 fs to 150 fs after absorption with methyl orange (MO) molecules, indicating the plasmon-induced hot-electron transfer (PIHET) process from a-MoO3 to MO. Therefore, a-MoO3 monolayers present high SERS performance due to the synergistic effect of electromagnetic enhancement (EM) and PIHET, proposing the EM-PIHET synergistic mechanism in a-MoO3. In addition, a-MoO3 possesses higher electron delocalization and electronic state density than crystal MoO3 (c-MoO3), which is conducive to the PIHET. The limit of detection (LOD) for o-aminoazotoluene (o-AAT) is 10-9 M with good uniformity, acid resistance, and thermal stability. In this work, trace detection and identification of various carcinogenic aromatic amines based on a-MoO3 monolayers is realized, which is of great significance for reducing cancer infection rates.

Plasmon-Induced Hot Electrons in Nanostructured Materials: Generation, Collection, and Application to Photochemistry

Plasmon refers to the coherent oscillation of all conduction-band electrons in a nanostructure made of a metal or a heavily doped semiconductor. Upon excitation, the plasmon can decay through different channels, including nonradiative Landau damping for the generation of plasmon-induced energetic carriers, the so-called hot electrons and holes. The energetic carriers can be collected by transferring to a functional material situated next to the plasmonic component in a hybrid configuration to facilitate a range of photochemical processes for energy or chemical conversion. This article centers on the recent advancement in generating and utilizing plasmon-induced hot electrons in a rich variety of hybrid nanostructures. After a brief introduction to the fundamentals of hot-electron generation and decay in plasmonic nanocrystals, we extensively discuss how to collect the hot electrons with various types of functional materials. With a focus on plasmonic nanocrystals made of metals, we also briefly examine those based upon heavily doped semiconductors. Finally, we illustrate how site-selected growth can be leveraged for the rational fabrication of different types of hybrid nanostructures, with an emphasis on the parameters that can be experimentally controlled to tailor the properties for various applications.

Antimony-Doped Wide Bandgap Molybdenum Trioxide with Enhanced Localized Surface Plasmon Resonance for Nitrogen Photofixation

Plasmonic metal oxides are promising photocatalysts for the artificial photosynthesis of green ammonia due to localized surface plasmon resonance (LSPR) enhanced photoconversion and rich surface oxygen vacancies improved chemisorption and activation of dinitrogen molecules. However, these oxygen vacancies are unstable during the photocatalytic process and could be oxidized by photogenerated holes, leading to the vanishing of the LSPR. Here, we fabricated antimony-doped molybdenum trioxide nanosheets with stable plasmonic absorption extending into the near-infrared (NIR) range, even after harsh treatment in oxidative atmospheric conditions at high temperatures. For undoped plasmonic MoO3-x nanosheets, the LSPR originates from the abundant oxygen vacancies that vanish after heat treatment at high temperatures in air, leading to the disappearance of the LSPR absorption. Sb doping does not significantly increase the concentration of oxygen vacancies while donating more free electrons because Sb can keep a lower oxidation state. Heat treatment diminished the oxygen vacancies while not affecting the low oxidation state of Sb. As a result, heat-treated Sb-doped MoO3-x nanosheets still show strong LSPR absorption in the NIR range. Both experimental results and theoretical calculations demonstrated that add-on states close to the Fermi level are formed due to the Sb doping and high concentration of oxygen vacancies. The prepared samples were used for photocatalytic nitrogen reduction and showed an LSPR-dependent photocatalytic performance. The present work has provided an effective strategy to stabilize the LSPR of plasmonic semiconductor photocatalysts.

Efficient Homojunction/Heterojunction Photocatalyst via Integrating CsPbBr3 Quantum Dot Homojunction with TiO2 for Degradation of Organic Dyes

A novel TiO2-CsPbBr3(Q) photocatalyst is proposed and rationally constructed, where CsPbBr3 perovskite quantum dots (QDs) of various sizes inside mesopore TiO2 (M-TiO2) are integrated. These perovskite QDs, generated in situ within M-TiO2, establish a type-II homojunction. Interestingly, a Z-scheme heterojunction is simultaneously formed at the interface between CsPbBr3 and TiO2. Due to the coexistence of the type-II homojunction and the Z-scheme heterojunction, photogenerated electrons are effectively transferred from TiO2 to CsPbBr3, thereby suppressing carrier recombination and thus enhancing the degradation of rhodamine B (RhB). Compared with pure CsPbBr3 and TiO2, TiO2-CsPbBr3(Q) shows significantly enhanced photocatalytic performance for RhB degradation. The degradation efficiency of RhB in the presence of the TiO2-CsPbBr3(Q) attains 97.7% in 5 min under light illumination, representing the highest efficiency observed among photocatalysts based on TiO2. This study will facilitate the development of superior semiconductor catalysts for photocatalytic applications.

Plasmon-Induced Ultrafast Hot Hole Transfer in Nonstoichiometric CuxInyS/CdS Heteronanocrystals

Plasmonic semiconductors are promising candidates for developing energy conversion devices due to their tunable band gap, cost-effectiveness, and nontoxicity. Such materials exhibit remarkable capabilities for harvesting infrared photons, which constitute half of the solar energy spectrum. Herein, we have synthesized near-infrared (NIR) active CuxInyS nanocrystals and CuxInyS/CdS heterostructure nanocrystals (HNCs) to investigate plasmon-induced charge transfer dynamics on an ultrafast time scale. Employing femtosecond transient absorption spectroscopy, we demonstrate that upon exciting the HNCs with sub-band gap NIR photons (λ = 840 nm), the hot holes are generated in the valence band of plasmonic CuxInyS and transferred to the adjacent semiconductor. The decreased signal intensity and accelerated hole phonon relaxation dynamics for HNCs reveal efficient transfer of plasmon-induced hot carriers from CuxInyS to CdS under both 840 and 350 nm laser excitations, providing a pathway for enhanced carrier utilization. These findings shed light on the potential of ternary chalcogenides in plasmonic applications, highlighting efficient hot carrier extraction to adjacent semiconductors.

Aeration-Free In Situ Fenton-like Reaction: Specific Adsorption and Activation of Oxygen on Heterophase Oxygen Vacancies

Aeration accounts for 35-51% of the overall energy consumption in wastewater treatment processes and results in an annual energy consumption of 5-7.5 billion kWh. Herein, a solar-powered continuous-flow device was designed for aeration-free in situ Fenton-like reactions to treat wastewater. This system is based on the combination of TiO2-x/W18O49 featuring heterophase oxygen vacancy interactions with floating reduced graphene/polyurethane foam, which produces hydrogen peroxide in situ at the rates of up to 4.2 ppm h-1 with degradation rates of more than 90% for various antibiotics. The heterophase oxygen vacancies play an important role in the stretching of the O-O bond by regulating the d-band center of TiO2-x/W18O49, promoting the hydrogenation of *·O2- or *OOH by H+ enrichment, and accelerating the production of reactive oxygen species by spontaneous adsorption of hydrogen peroxide. Furthermore, the degradation mechanisms of antibiotics and the treatment of actual wastewater were thoroughly investigated. In short, the study provides a meaningful reference for potentially undertaking the "aeration-free" in situ Fenton reaction, which can help reduce or even completely eradicate the aeration costs and energy requirements during the treatment of wastewater.

Emerald eco-synthesis: harnessing oleander for green silver nanoparticle production and advancing photocatalytic MB degradation with TiO2&CuO nanocomposite

The tertiary composite of TiO2/CuO @ Ag (TCA) were synthesized by the solid state method using different ratios of TiO2/CuO NCs and Ag NPs. The structural, morphological, and optical properties of nanocomposites were analyzed by scanning electron microscope, Transmission electron microscope, X-ray diffraction, Fourier transform infrared spectra, UV-Vis diffuse reflectance spectra (UV-Vis/DRS) and photoluminescence spectrophotometry. The results showed enhanced activity of TCA hybrid nano crystals in oxidizing MB in water under visible light irradiation compared to pure TiO2. The photocatalytic performance TCA samples increased with suitable Ag content. The results show that the photo degradation efficiency of the TiO2 compound improved from 13 to 85% in the presence of TiO2-CuO and to 98.87% in the presence of Ag containing TiO2-CuO, which is 7.6 times higher than that of TiO2. Optical characterization results show enhanced nanocomposite absorption in the visible region with long lifetimes between e/h+ at optimal TiO2-CuO/Ag (TCA2) ratio. Reusable experiments indicated that the prepared TCA NC photo catalysts were stable during MB photo degradation and had practical applications for environmental remediation.

W18O49 Nanowhiskers Decorating SiO2 Nanofibers: Lessons from In Situ SEM/TEM Growth to Large Scale Synthesis and Fundamental Structural Understanding

Tungsten suboxide W18O49 nanowhiskers are a material of great interest due to their potential high-end applications in electronics, near-infrared light shielding, catalysis, and gas sensing. The present study introduces three main approaches for the fundamental understanding of W18O49 nanowhisker growth and structure. First, W18O49 nanowhiskers were grown from γ-WO3/a-SiO2 nanofibers in situ in a scanning electron microscope (SEM) utilizing a specially designed microreactor (μReactor). It was found that irradiation by the electron beam slows the growth kinetics of the W18O49 nanowhisker, markedly. Following this, an in situ TEM study led to some new fundamental understanding of the growth mode of the crystal shear planes in the W18O49 nanowhisker and the formation of a domain (bundle) structure. High-resolution scanning transmission electron microscopy analysis of a cross-sectioned W18O49 nanowhisker revealed the well-documented pentagonal Magnéli columns and hexagonal channel characteristics for this phase. Furthermore, a highly crystalline and oriented domain structure and previously unreported mixed structural arrangement of tungsten oxide polyhedrons were analyzed. The tungsten oxide phases found in the cross section of the W18O49 nanowhisker were analyzed by nanodiffraction and electron energy loss spectroscopy (EELS), which were discussed and compared in light of theoretical calculations based on the density functional theory method. Finally, the knowledge gained from the in situ SEM and TEM experiments was valorized in developing a multigram synthesis of W18O49/a-SiO2 urchin-like nanofibers in a flow reactor.

Electrospinning Photocatalysis Meet In Situ Irradiated XPS: Recent Mechanisms Advances and Challenges

Producing solar fuels over photocatalysts under light irradiation is a considerable way to alleviate energy crises and environmental pollution. To develop the yields of solar fuels, photocatalysts with broad light absorption, fast charge carrier migration, and abundant reaction sites need to be designed. Electrospun 1D nanofibers with large specific areas and high porosity have been widely used in the efficient production of solar fuels. Nevertheless, it is challenging to do in-depth mechanism research on electrospun nanofiber-based photocatalysts since there are multiple charge transfer routes and various reaction sites in these systems. Here, the basic principles of electrospinning and photocatalysis are systemically discussed. Then, the different roles of electrospun nanofibers played in recent research to boost photocatalytic efficiency are highlighted. It is noteworthy that the working principles and main advantages of in situ irradiated photoelectron spectroscopy (ISI-XPS), a new technique to investigate migration routes of charge carriers and identify active sites in electrospun nanofibers based photocatalysts, are summarized for the first time. At last, a brief summary on the future orientation of photocatalysts based on electrospun nanofibers as well as the perspectives on the development of the ISI-XPS technique are also provided.

Selective Cocatalyst Decoration of Narrow-Bandgap Broken-Gap Heterojunction for Directional Charge Transfer and High Photocatalytic Properties

Narrow-bandgap semiconductors are promising photocatalysts facing the challenges of low photoredox potentials and high carrier recombination. Here, a broken-gap heterojunction Bi/Bi2 S3 /Bi/MnO2 /MnOx , composed of narrow-bandgap semiconductors, is selectively decorated by Bi, MnOx nanodots (NDs) to achieve robust photoredox ability. The Bi NDs insertion at the Bi2 S3 /MnO2 interface induces a vertical carrier migration to realize sufficient photoredox potentials to produce O2 •- and • OH active species. The surface decoration of Bi2 S3 /Bi/MnO2 by Bi and MnOx cocatalysts drives electrons and holes in opposite directions for optimal photogenerated charge separation. The selective cocatalysts decoration realizes synergistic surface and bulk phase carrier separation. Density functional theory (DFT) calculation suggests that Bi and MnOx NDs act as active sites enhancing the absorption and reactants activation. The decorated broken-gap heterojunction demonstrates excellent performance for full-light driving organic pollution degradation with great commercial application potential.

Fabrication of CdLa2S4@La(OH)3@Co3S4 Z-scheme heterojunctions with dense La, S-dual defects for robust photothermal assisted photocatalytic performance

Optimize the separation and transport mechanism of photogenerated carriers in heterojunction composites, and make full use of the active sites of each material are key factors to enhance photocatalytic activity. Herein, we successfully synthesize defective CdLa₂S₄@La(OH)₃@Co₃S₄ (CLS@LOH@CS) Z-scheme heterojunction photocatalysts through a facile solvothermal method, which show broad-spectrum absorption and excellent photocatalytic activity. La(OH)₃ nanosheets not only greatly increase the specific surface area of photocatalyst, but also can be coupled with CdLa₂S₄ (CLS) and form Z-scheme heterojunction by converting irradiation light. In addition, Co₃S₄ with photothermal properties is obtained by in-situ sulfurization method, which can release heat to improve the mobility of photogenerated carriers, and also be used as a cocatalyst for hydrogen production. Most importantly, the formation of Co₃S₄ leads to a large number of sulfur vacancy defects in CLS, and thus improving the separation efficiency of photogenerated electrons and holes, and increasing the catalytic active sites. Consequently, the maximum hydrogen production rate of CLS@LOH@CS heterojunctions can reach 26.4 mmol g^-1h^-1, which is 293 times than pristine CLS (0.09 mmol g^-1h^-1). This work will provide a new horizon for synthesizing high efficiency heterojunction photocatalysts through switching the separation and transport modes of photogenerated carrier.

1D/1D W18O49/Cd0.9Zn0.1S S-scheme heterojunction with spatial charge separation for high-yield photocatalytic H2 evolution

Semiconductor photocatalytic water splitting is a green way to convert solar energy into chemical energy, but the recombination of electron and hole pairs and the low utilization of sunlight restrict the development of photocatalytic technology. By comparing the morphologies and hydrogen production properties of different proportions of solid solutions (Cd_xZn_1-xS), one-dimensional (1D) Cd_0.9Zn_0.1S nanorods (NRs) with the best photocatalytic properties are obtained. In addition, 1D W₁₈O₄₉ nanowires are assembled on the surface of 1D Cd_0.9Zn_0.1S NRs to construct a novel 1D/1D step-scheme (S-scheme) W₁₈O₄₉/Cd_0.9Zn_0.1S heterojunction photocatalyst. The W₁₈O₄₉/Cd_0.9Zn_0.1S heterojunction expands the optical absorption capacity of Cd_0.9Zn_0.1S NRs to provide more energy for the photoexcitation of electrons. The optimal hydrogen production rate of W₁₈O₄₉/Cd_0.9Zn_0.1S NRs with W₁₈O₄₉ content of 9 wt% is as high as 66.3 mmol·h^-1·g^-1, which is 5.7 times and 1.6 times higher than that of Cd_0.9Zn_0.1S NRs and 1 wt% Pt/Cd_0.9Zn_0.1S NRs. The apparent quantum efficiency (AQE) of 9 wt% W₁₈O₄₉/Cd_0.9Zn_0.1S reaches 56.0 % and 25.9 % under light wavelength irradiation at 370 and 456 nm, respectively. After the 20 h cycle stability test, the activity of photocatalytic hydrogen evolution does not decrease, due that the severe photo-corrosion of Cd_0.9Zn_0.1S NRs is efficiently inhibited. This work not only provides a simple and controllable synthesis method for the preparation of heterojunction structure, but also opens up a new way to improve the hydrogen evolution activity and stability of sulfur compounds.

An efficient and multifunctional S-scheme heterojunction photocatalyst constructed by tungsten oxide and graphitic carbon nitride: Design and mechanism study

The design of multifunctional photocatalyst with strong redox performance is the key to achieve sustainable utilization of solar energy. In this study, an elegant S-scheme heterojunction photocatalyst was constructed between metal-free graphitic carbon nitride (g-C₃N₄) and noble-metal-free tungsten oxide (W₁₈O₄₉). As-established S-scheme heterojunction photocatalyst enabled multifunctional photocatalysis behavior, including hydrogen production, degradation (Rhodamine B) and bactericidal (Escherichia coli) properties, which represented extraordinary sustainability. Finite-difference time-domain (FDTD) simulations manifested that the integration of double-layer hollow g-C₃N₄ nanotubes with W₁₈O₄₉ nanowires could expand the light harvesting ability. Demonstrated by density functional theory (DFT) calculations and electron spin resonance (ESR) measurements, the S-scheme heterojunction not only promoted the separation of carriers, but also improved the redox ability of the catalyst. This work provides a theoretical basis for enhancing the photocatalytic performances and broadening the application field of photocatalysis.

Three-dimensional S-scheme heterojunction by integration of purple tungsten oxide nanowires and cadmium sulfide nanospheres for effective photocatalytic hydrogen generation

The practical photocatalytic application of cadmium sulfide (CdS) has been significantly constrained by fast carrier recombination and significant photocorrosion. Therefore, we developed a three-dimensional (3D) step-by-step (S-scheme) heterojunction using the coupling interface between purple tungsten oxide (W₁₈O₄₉) nanowires and CdS nanospheres. The photocatalytic hydrogen evolution rate of optimized W₁₈O₄₉/CdS 3D S-scheme heterojunction can reach 9.7 mmol·h^-1·g^-1, 7.5 and 16.2 times greater than pure CdS (1.3 mmol·h^-1·g^-1) and 10 wt%-W₁₈O₄₉/CdS (mechanical mixing, 0.6 mmol·h^-1·g^-1), proving that the tight S-scheme heterojunction constructed by the hydrothermal method can efficiently enhance the carrier separation. Notably, the apparent quantum efficiency (AQE) of W₁₈O₄₉/CdS 3D S-scheme heterojunction approaches 7.5% and 3.5% at 370 nm and 456 nm, respectively, which is 7.5 and 8.8 times than pure CdS (1.0% and 0.4%). The produced W₁₈O₄₉/CdS catalyst also has relative stability of structure and hydrogen production. Additionally, the H₂ evolution rate of W₁₈O₄₉/CdS 3D S-scheme heterojunction is 1.2 times greater than 1 wt%-platinum (Pt)/CdS (8.2 mmol·h^-1·g^-1), which indicates that the W₁₈O₄₉ can effectively replace the precious metal for boosting the hydrogen production rate.

Near-Infrared Light Driven ZnIn2S4-Based Photocatalysts for Environmental and Energy Applications: Progress and Perspectives

Zinc indium sulfide (ZnIn₂S₄), as a significant visible-light-responsive photocatalyst, has become a research hotspot to tackle energy demand and environmental issues owing to its excellent properties of high stability, easy fabrication, and remarkable catalytic activity. However, its drawbacks, including low utilization of solar light and fast photoinduced charge carriers, limit its applications. Promoting the response for near-infrared (NIR) light (~52% solar light) of ZnIn₂S₄-based photocatalysts is the primary challenge to overcome. In this review, various modulation strategies of ZnIn₂S₄ have been described, which include hybrid with narrow optical gap materials, bandgap engineering, up-conversion materials, and surface plasmon materials for enhanced NIR photocatalytic performance in the applications of hydrogen evolution, pollutants purification, and CO₂ reduction. In addition, the synthesis methods and mechanisms of NIR light-driven ZnIn₂S₄-based photocatalysts are summarized. Finally, this review presents perspectives for future development of efficient NIR photon conversion of ZnIn₂S₄-based photocatalysts.

Sodium-Directed Photon-Induced Assembly Strategy for Preparing Multisite Catalysts with High Atomic Utilization Efficiency

Integrating different reaction sites offers new prospects to address the difficulties in single-atom catalysis, but the precise regulation of active sites at the atomic level remains challenging. Here, we demonstrate a sodium-directed photon-induced assembly (SPA) strategy for boosting the atomic utilization efficiency of single-atom catalysts (SACs) by constructing multifarious Au sites on TiO₂ substrate. Na⁺ was employed as the crucial cement to direct Au single atoms onto TiO₂, while the light-induced electron transfer from excited TiO₂ to Au(Na⁺) ensembles contributed to the self-assembly formation of Au nanoclusters. The synergism between plasmonic near-field and Schottky junction enabled the cascade electron transfer for charge separation, which was further enhanced by oxygen vacancies in TiO₂. Our dual-site photocatalysts exhibited a nearly 2 orders of magnitude improvement in the hydrogen evolution activity under simulated solar light, with a striking turnover frequency (TOF) value of 1533 h^-1 that exceeded other Au/TiO₂-based photocatalysts reported. Our SPA strategy can be easily extended to prepare a wide range of metal-coupled nanostructures with enhanced performance for diverse catalytic reactions. Thus, this study provides a well-defined platform to extend the boundaries of SACs for multisite catalysis through harnessing metal-support interactions.

Internal electric field induced photocarriers separation of nickel-doped pyrite/pyrite homojunction with rich sulfur vacancies for superior Cr(VI) reduction

Improving the separation efficiency and transfer ability of photoinduced electrons/holes in pyrite (FeS2)-based photocatalytic materials is significant for the photoreduction of hexavalent chromium (Cr(VI)) but still remains a challenge. Herein, a novel homojunction was prepared through in-situ growth of nickel (Ni) doped FeS2 nanoparticles on FeS2 nanobelts (denoted as Ni-FeS2/FeS2). Systematical characterizations revealed that Ni doped FeS2 nanoparticles have been successfully in situ grown along the lattice of FeS2 nanobelts. Photoreduction experiments demonstrated that the Ni-FeS2/FeS2 homojunction with 2 mmol Ni doping contents (denoted as 2Ni-FeS2/FeS2) exhibited the optimum Cr(VI) reduction efficiency among the studied catalysts. Density Functional Theory (DFT) calculated results verified that Ni doping could not only be advantageous for the formation of sulfur vacancies but also modify the band gap and band structure of FeS2 nanoparticles. Moreover, several doping energy levels caused by Ni doping have also appeared near the Fermi level of FeS2 nanoparticles. The migration paths of electrons and the existence of internal electric field (IEF) in homojunction were further verified by the calculation of work function. To sum up, the doping energy levels and IEF that produced by homojunction played important roles in accelerating the separation efficiency of its photogenerated carriers.

Broadband Plasmonic NbN Photocatalysts for Enhanced Hydrogen Generation from Ammonia Borane under Visible-Near-Infrared Illumination

The superior light-harvesting ability of plasmonic metallic nanostructures makes them uniquely suitable for applications in the light-driven chemical transformations relevant to renewable fuels. Here we demonstrate the use of niobium nitride (NbN) nanostructures as a nonprecious plasmonic photocatalyst for the highly efficient H₂ generation from the hydrolytic decomposition of ammonia borane (AB). Porous nanostructured NbN with a hierarchical flower-like nanoarchitecture was synthesized to achieve strong broadband plasmonic absorption in the visible and near-infrared (NIR) regions. The plasmonic NbN absorbers, when loaded with an optimized amount (∼2 wt %) of nanoparticulate Ni as the catalytic centers, show notably enhanced activity toward AB decomposition for H₂ evolution under both visible and NIR illumination, with the reaction rates being 4.6 (>420 nm) and 2.7 (>780 nm) times higher than that of the dark reaction. Further kinetic measurements and mechanistic investigations reveal that the photocatalytic activity originates from the plasmonic hot-carrier contributions.

Template synthesis of dual-functional porous MoS2 nanoparticles with photothermal conversion and catalytic properties

Advanced catalysis triggered by photothermal conversion effects has aroused increasing interest due to its huge potential in environmental purification. In this work, we developed a novel approach to the fast degradation of 4-nitrophenol (4-Nip) using porous MoS₂ nanoparticles as catalysts, which integrate the intrinsic catalytic property of MoS₂ with its photothermal conversion capability. Using assembled polystyrene-b-poly(2-vinylpyridine) block copolymers as soft templates, various MoS₂ particles were prepared, which exhibited tailored morphologies (e.g., pomegranate-like, hollow, and open porous structures). The photothermal conversion performance of these featured particles was compared under near-infrared (NIR) light irradiation. Intriguingly, when these porous MoS₂ particles were further employed as catalysts for the reduction of 4-Nip, the reaction rate constant was increased by a factor of 1.5 under NIR illumination. We attribute this catalytic enhancement to the open porous architecture and light-to-heat conversion performance of the MoS₂ particles. This contribution offers new opportunities for efficient photothermal-assisted catalysis.

Plasmonic Active "Hot Spots"-Confined Photocatalytic CO2 Reduction with High Selectivity for CH4 Production

Plasmonic nanostructures have tremendous potential to be applied in photocatalytic CO₂ reduction, since their localized surface plasmon resonance can collect low-energy-photons to derive energetic "hot electrons" for reducing the CO₂ activation-barrier. However, the hot electron-driven CO₂ reduction is usually limited by poor efficiency and low selectivity for producing kinetically unfavorable hydrocarbons. Here, a new idea of plasmonic active "hot spot"-confined photocatalysis is proposed to overcome this drawback. W₁₈ O₄₉ nanowires on the outer surface of Au nanoparticles-embedded TiO₂ electrospun nanofibers are assembled to obtain lots of Au/TiO₂ /W₁₈ O₄₉ sandwich-like substructures in the formed plasmonic heterostructure. The short distance (< 10 nm) between Au and adjacent W₁₈ O₄₉ can induce an intense plasmon-coupling to form the active "hot spots" in the substructures. These active "hot spots" are capable of not only gathering the incident light to enhance "hot electrons" generation and migration, but also capturing protons and CO through the dual-hetero-active-sites (Au-O-Ti and W-O-Ti) at the Au/TiO₂ /W₁₈ O₄₉ interface, as evidenced by systematic experiments and simulation analyses. Thus, during photocatalytic CO₂ reduction at 43± 2 °C, these active "hot spots" enriched in the well-designed Au/TiO₂ /W₁₈ O₄₉ plasmonic heterostructure can synergistically confine the hot-electron, proton, and CO intermediates for resulting in the CH₄ and CO production-rates at ≈35.55 and ≈2.57 µmol g^-1 h^-1 , respectively, and the CH₄ -product selectivity at ≈93.3%.

Construction of an Interfacial Photocatalytic Mode Based on Carbonized Mushrooms to Enhance Infrared Light-Assisted Photocatalytic Water Splitting Performance

To find a more efficient way to generate photocatalytic hydrogen, we developed the interfacial photocatalytic mode, in which the photocatalytic reaction can be transferred to a high-energy interfacial area. The new interfacial mode in this work is assembled with the help of carbonized mushrooms, which is an ideal water transporter as well as an excellent photothermal converter. The higher temperature from efficient light-to-heat conversion performance and thermal localization promote the efficiency of hydrogen evolution, and some effects peculiar to the interfacial mode can make the departure of hydrogen from the active sites of the photocatalyst smoother. As a result, the active sites can be exposed in a timely manner to allow the progress of the next cycle of the photocatalytic reaction to be smoother. The efficiency of interfacial photocatalytic hydrogen production can reach >10 times that of the corresponding sample in the traditional bulk water mode. This work has allowed further exploration of the construction of the interfacial photocatalytic mode, provided a reliable experimental basis for the development of the interfacial mode, and illuminated a new path for the development of photocatalytic water splitting.

Recent progress of noble metals with tailored features in catalytic oxidation for organic pollutants degradation

With the increasing serious water pollutions, an increasing interest has given for the nanocomposites as environmental catalysts. To date, noble metals-based nanocomposites have been extensively studied by researchers in environmental catalysis. In detail, serving as key functional parts, noble metals are usually combined with other nanomaterials for rationally designing nanocomposites, which exhibit enhanced catalytic properties in pollutants removal. Noble metals in the nanocomposites possess tailored properties, thus playing different important roles in catalytic oxidation reactions for pollutants removal. To motivate the research and elaborate the progress of noble metals, this review (i) summarizes advanced characterization techniques and rising technology of theoretical calculation for evaluating noble metal, and (ii) classifies the roles according to their disparate mechanism in different catalytic oxidation reactions. Meanwhile, the enhanced mechanism and influence factors are discussed. (iii) The conclusions, facing challenges and perspectives are proposed for further development of noble metals-based nanocomposites as environmental catalysts.

Photothermal-boosted effect of binary CuFe bimetallic magnetic MOF heterojunction for high-performance photo-Fenton degradation of organic pollutants

Overcoming the relatively low catalytic activity and strict acid pH condition of common photo-Fenton reaction is the key to alleviate the serious global burden caused by common organic pollutants. Herein, a binary homologous bimetallic heterojunction of magnetic CuFe₂O₄@MIL-100(Fe, Cu) metal-organic frameworks (MCuFe MOF) with photothermal-boosted photo-Fenton activity is constructed as an ideal practical photo-Fenton catalyst for the degradation of organic pollutants. Through an in-situ derivation strategy, the formed homologous bimetallic heterojunction with binary redox couples can simultaneously improve the visible light harvesting capacity and expedite the separation and transfer of photogenerated electrons/holes pairs, leading to the continuous and rapid circulation of both Fe^III/Fe^II and Cu^II/Cu^I redox couples. Notably, the heterojunction shows intrinsic photo-thermal conversion effect, which is found to be beneficial to boost the photo-Fenton activity. Impressively, MCuFe MOF shows remarkable catalytic performance towards the degradation of various organic pollutants by comprehensively increasing H₂O₂ decomposition efficiency and decreasing the required dosage of MCuFe MOF (0.05 g L^-1) with a wide pH range (3.0-10.0). As such, a photo-Fenton catalyst consisting of binary homologous bimetallic heterojunction is first disclosed, as well as its photothermal-enhanced effect, which is expected to drive great advance in the degradation of organic pollutants for practical applications.

Triple-Channel Charge Transfer over W18O49/Au/g-C3N4 Z-Scheme Photocatalysts for Achieving Broad-Spectrum Solar Hydrogen Production

Z-scheme heterojunctions are fundamentally promising yet practically appealing for photocatalytic hydrogen (H2) production owing to the enhanced redox power, spatial separation of charge carriers, and broad-spectrum solar light harvesting. The charge-transfer dynamics at Z-scheme heterojunctions can be accelerated by inserting charge-transfer mediators at the heterojunction interfaces. In this study, we introduce Au nanoparticle mediators in the Z-scheme W18O49/g-C3N4 heterostructure, which enables an improved H2 production rate of 3465 μmol/g·h compared with the direct Z-scheme W18O49/g-C3N4 (1785 μmol/g·h) under 1 sun irradiation. The apparent quantum yields of H2 production with W18O49/Au/g-C3N4 are 3.9% and 9.3% at 420 and 1200 nm, respectively. The improved photocatalytic H2 production activity of W18O49/Au/g-C3N4 is attributable to the triple-channel charge-transfer mechanism: channel I─Z-scheme charge transfer facilitates charge separation and increased redox power of the photoexcited electrons; channels II and III─the localized surface plasmon resonances from Au (channel II) and W18O49 (channel III) enable light harvesting extension from visible to near-infrared wavelengths.

ZnIn2 S4 -Based Photocatalysts for Energy and Environmental Applications

As a fascinating visible-light-responsive photocatalyst, zinc indium sulfide (ZnIn₂ S₄ ) has attracted extensive interdisciplinary interest and is expected to become a new research hotspot in the near future, due to its nontoxicity, suitable band gap, high physicochemical stability and durability, ease of synthesis, and appealing catalytic activity. This review provides an overview on the recent advances in ZnIn₂ S₄ -based photocatalysts. First, the crystal structures and band structures of ZnIn₂ S₄ are briefly introduced. Then, various modulation strategies of ZnIn₂ S₄ are outlined for better photocatalytic performance, which includes morphology and structure engineering, vacancy engineering, doping engineering, hydrogenation engineering, and the construction of ZnIn₂ S₄ -based composites. Thereafter, the potential applications in the energy and environmental area of ZnIn₂ S₄ -based photocatalysts are summarized. Finally, some personal perspectives about the promises and prospects of this emerging material are provided.

Interfacial Design to Enhance Photocatalytic Hydrogen Evolution via Optimizing Energy and Mass Flows

Energy and mass transfer in photocatalytic systems plays a significant role in photocatalytic water splitting, but relevant research has long been ignored. Here, an interfacial photocatalytic mode for photocatalytic hydrogen production is exploited to optimize the energy and mass flows and mainly includes a heat-insulating layer, a water-channel layer, and a photothermal photocatalytic layer. In this mode, the energy flow is optimized for efficient spreading, conversion, and utilization. A low-loss path (ultrathin water film) and an efficient heat localized zone are constructed, where light energy, especially infrared-light energy, can transfer to the target functional membrane surface with low loss and the thermal energy converted from light can be localized for further use. Meanwhile, the optimization of the mass flow is achieved by improving the desorption capacity of the products. The generated hydrogen bubbles can rapidly leave from the surface of the photocatalyst, along with the active sites being released timely. Consequently, the photocatalytic hydrogen production rate can be increased up to about 6.6 times that in a conventional photocatalytic mode. From the system design aspect, this work provides an efficient strategy to improve the performance of photocatalytic water splitting by optimizing the energy and mass flows.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Near-Infrared-Driven Photocatalysts: Design, Construction, and Applications

Photocatalysts, which utilize solar energy to catalyze the oxidation or reduction half reactions, have attracted tremendous interest due to their great potential in addressing increasingly severe global energy and environmental issues. Solar energy utilization plays an important role in determining photocatalytic efficiencies. In the past few decades, many studies have been done to promote photocatalytic efficiencies via extending the absorption of solar energy into near-infrared (NIR) light. This Review comprehensively summarizes the recent progress in NIR-driven photocatalysts, including the strategies to harvest NIR photons and corresponding photocatalytic applications such as the degradation of organic pollutants, water disinfection, water splitting for H₂ and O₂ evolution, CO₂ reduction, etc. The application of NIR-active photocatalysts employed as electrocatalysts is also presented. The subject matter of this Review is designed to present the relationship between material structure and material optical properties as well as the advantage of material modification in photocatalytic reactions. It paves the way for future material design in solar energy-related fields and other energy conversion and storage fields.

Isolated Cobalt Centers on W18O49 Nanowires Perform as a Reaction Switch for Efficient CO2 Photoreduction

Isolated cobalt atoms have been successfully decorated onto the surface of W₁₈O₄₉ ultrathin nanowires. The Co-atom-decorated W₁₈O₄₉ nanowires (W₁₈O₄₉@Co) greatly accelerate the charge carrier separation and electron transport in the catalytic system. Moreover, the surface decoration with Co atoms modifies the energy configuration of the W₁₈O₄₉@Co hybrid and thus boosts the redox capability of photoexcited electrons for CO₂ reduction. The decorated Co atoms work as the real active sites and, perhaps more importantly, perform as a reaction switch to enable the reaction to proceed. The optimized catalyst delivers considerable activity for photocatalytic CO₂ reduction, yielding an impressive CO generation rate of 21.18 mmol g^-1 h^-1.

Highlights of the characterization techniques on inorganic, organic (COF) and hybrid (MOF) photocatalytic semiconductors

This review is dedicated to the brave COVID warriors fighting against the COVID-2019 pandemic.

Proton-assisted electron transfer and hydrogen-atom diffusion in a model system for photocatalytic hydrogen production

Solar energy can be converted into chemical energy by photocatalytic water splitting to produce molecular hydrogen. Details of the photo-induced reaction mechanism occurring on the surface of a semiconductor are not fully understood, however. Herein, we employ a model photocatalytic system consisting of single atoms deposited on quantum dots that are anchored on to a primary photocatalyst to explore fundamental aspects of photolytic hydrogen generation. Single platinum atoms (Pt₁) are anchored onto carbon nitride quantum dots (CNQDs), which are loaded onto graphitic carbon nitride nanosheets (CNS), forming a Pt₁@CNQDs/CNS composite. Pt₁@CNQDs/CNS provides a well-defined photocatalytic system in which the electron and proton transfer processes that lead to the formation of hydrogen gas can be investigated. Results suggest that hydrogen bonding between hydrophilic surface groups of the CNQDs and interfacial water molecules facilitates both proton-assisted electron transfer and sorption/desorption pathways. Surface bound hydrogen atoms appear to diffuse from CNQDs surface sites to the deposited Pt₁ catalytic sites leading to higher hydrogen-atom fugacity surrounding each isolated Pt₁ site. We identify a pathway that allows for hydrogen-atom recombination into molecular hydrogen and eventually to hydrogen bubble evolution.

Sunlight-Operated TiO2-Based Photocatalysts

Photo-catalysis is a research field with broad applications in terms of potential technological applications related to energy production and managing, environmental protection, and chemical synthesis fields. A global goal, common to all of these fields, is to generate photo-catalytic materials able to use a renewable energy source such as the sun. As most active photocatalysts such as titanium oxides are essentially UV absorbers, they need to be upgraded in order to achieve the fruitful use of the whole solar spectrum, from UV to infrared wavelengths. A lot of different strategies have been pursued to reach this goal. Here, we selected representative examples of the most successful ones. We mainly highlighted doping and composite systems as those with higher potential in this quest. For each of these two approaches, we highlight the different possibilities explored in the literature. For doping of the main photocatalysts, we consider the use of metal and non-metals oriented to modify the band gap energy as well as to create specific localized electronic states. We also described selected cases of using up-conversion doping cations. For composite systems, we described the use of binary and ternary systems. In addition to a main photo-catalyst, these systems contain low band gap, up-conversion or plasmonic semiconductors, plasmonic and non-plasmonic metals and polymers.

3D structured materials and devices for artificial photosynthesis

Artificial photosynthesis is an effective way to convert solar energy into fuels, which is of great significance to energy production and reduction of atmospheric CO₂ content. In recent years, 3D structured artificial photosynthetic system has made great progress as an effective design strategy. This review first highlights several typical mechanisms for improved artificial photosynthesis with 3D structures: improved light harvesting, mass transfer and charge separation. Then, we summarize typical examples of 3D structured artificial photosynthetic systems, including bioinspired structures, photonic crystals (PC), designed photonic structures (PC coupling structure, plasmon resonance structure, optical resonance structure, metamaterials), 3D-printed systems, nanowire integrated systems and hierarchical 3D structures. Finally, we discuss the problems and challenges to the application and development of 3D artificial photosynthetic system and the possible trends of future development. We hope this review can inspire more progress in the field of artificial photosynthesis.

Accelerating Photocatalytic Hydrogen Production and Pollutant Degradation by Functionalizing g-C3N4 With SnO2

Energy crises and environmental pollution are two serious threats to modern society. To overcome these problems, graphitic carbon nitride (g-C₃N₄) nanosheets were fabricated and functionalized with SnO₂ nanoparticles to produce H₂ from water splitting and degrade 2-chlorophenol under visible light irradiation. The fabricated samples showed enhanced photocatalytic activities for both H₂ evolution and pollutant degradation as compared to bare g-C₃N₄ and SnO₂. These enhanced photoactivities are attributed to the fast charge separation as the excited electrons transfer from g-C₃N₄ to the conduction band of SnO₂. This enhanced charge separation has been confirmed by the photoluminescence spectra, steady state surface photovoltage spectroscopic measurement, and formed hydroxyl radicals. It is believed that this work will provide a feasible route to synthesize photocatalysts for improved energy production and environmental purification.

Dual Metal-Organic Framework Heterointerface

Herein, a core-shell dual metal-organic framework (MOF) heterointerface is synthesized. The Prussian blue (PB) MOF acts as a core for the growth of a porphyrin-doped MOF which is named PB@MOF. Porphyrins can significantly enhance the transfer of photoinspired electrons from PB and suppress the recombination of electrons and holes, thus enhancing the photocatalytic properties and consequently promoting the yields of singlet oxygen rapidly under 660 nm illumination. PB@MOF can exhibit a better photothermal conversion efficiency up to 29.9% under 808 nm near-infrared irradiation (NIR). The PB@MOF heterointerface can possess excellent antibacterial efficacies of 99.31% and 98.68% opposed to Staphylococcus aureus and Escherichia coli, separately, under the dual light illumination of 808 nm NIR and 660 nm red light for 10 min. Furthermore, the trace amount of Fe and Zr ions can trigger the immune system to favor wound healing, promising that PB@MOF achieves the rapid therapy of bacterial infected wounds and environmental disinfection.

Hydrogenated TiO2 Nanorod Arrays Decorated with Carbon Quantum Dots toward Efficient Photoelectrochemical Water Splitting

Limited light harvesting and charge collection are recognized as grand challenges for the exploration of highly efficient TiO₂ photoanodes. To overcome these intrinsic shortcomings, we reported the designed photoanode based on TiO₂ nanoarrays with both hydrogenation treatment and surface decoration of carbon quantum dots (CQDs) toward efficient photoelectrochemical water splitting. The results revealed that hydrogenation treatment could cause the formation of oxygen vacancies to suppress the recombination of photoinduced carriers. Meanwhile, the decorated CQDs could not only play as the electron reservoirs to trap photoinduced electrons but also remarkably enhance the solar light harvesting due to their upconversion effect. The as-fabricated photoanodes exhibited a large photocurrent density of ∼3.0 mA/cm² at 1.23 V versus reversible hydrogen electrode under simulated sunlight, which was the highest one among hydrogenated TiO₂ photoanodes ever reported and was ∼6 times that of pristine analogues.

Energy transfer from Er to Nd ions by the thermal effect and promotion of the photocatalysis of the NaYF4:Yb,Er,Nd/W18O49 heterostructure

The NaYF4:Yb,Er/W18O49 heterostructure is an excellent photocatalyst that can promote H2 evolution by hydrolyzing BH3NH3 under near-infrared (NIR) light irradiation. At the same time, the photothermal effect can be produced in photocatalytic reactions, which will cause the luminescence efficiency and photocatalytic activity to decrease. Determining how to take advantage of that photothermal effect becomes a major problem. Moreover, the energy transfer (ET) process from Er ions to Nd ions in NaYF4 co-doped with Yb/Er/Nd ions (NaYF4:Yb,Er,Nd) occurred at high temperature. Herein, the NaYF4:Yb,Er,Nd/W18O49 quasi-core-shell heterostructure was designed to achieve better H2 production capacity; this heterostructure exhibits a 1.5-fold enhancement of photocatalytic activity for H2 evolution as compared with the NaYF4:Yb,Er/W18O49 heterostructure. This study provides a new way to explore the catalytic activities in the NIR field for application in the development of a sustainable energy source.