2D Porous TiO2 Single-Crystalline Nanostructure Demonstrating High Photo-Electrochemical Water Splitting Performance

Pore walls as high-way for efficient bulk charge transfer in porous SrTiO3 single crystals boosting photocatalytic overall water splitting

Suppressing carrier recombination in bulk and facilitating carrier transfer to surface via rational structure design is of great significance to improve solar-to-H2 conversion efficiency. We demonstrate a facile hydrothermal method to synthesize porous SrTiO3 single crystals (SrTiO3-P) with exposed (001) facets by introducing carbon spheres as templates. The obviously increased surface photovoltage and photocurrent response indicate that the interconnected pore walls act as enormous charge transfer "highways", accelerating carrier transport from bulk to surface. Furthermore, the absence of grain boundaries and high crystallinity could also lower the carrier recombination rate. Thus, the SrTiO3-P photocatalyst loaded with Rh/Cr2O3 as cocatalyst exhibits 1.5 times higher overall water splitting activity than that of solid SrTiO3, with gas evolution rate of 19.99 μmol h-1 50 mg-1 for H2 and 11.37 μmol h-1 50 mg-1 for O2. Additionally, SrTiO3-P also shows superior stability without any decay during cycling testing. This work provides a new insight into designing efficient multicomponent photocatalysts with a single-crystal porous structure.

Ultrasound Induces Local Disorder of FeOOH on CdIn2S4 Photoanode for High Efficiency Photoelectrochemical Water Oxidation

The regulation of the crystal structure of oxygen evolution cocatalyst (OEC) is a promising strategy for enhancing the photoelectrochemical efficiency of photoanodes. However, the prevailing regulating approach typically requires a multistep procedure, presenting a significant challenge for maintaining the structural integrity and performance of the photoanode. Herein, FeOOH with a local disordered structure is directly grown on a CdIn2S4 (CIS) photoanode via a simple and mild sonochemical approach. By modulating the localized supersaturation of Ni ions, ultrasonic cavitation induces Ni ions to participate in the nucleation and growth of FeOOH clusters to cause local disorder of FeOOH. Consequently, the local disordered FeOOH facilitates the exposure of additional active sites, boosting OER kinetics and extending charge carrier lifetimes. Finally, the optimal photoanode reaches 4.52 mA cm-2 at 1.23 VRHE, and the onset potential shifts negatively by 330 mV, exhibiting excellent performance compared with that of other metal sulfide-based photoelectrodes reported thus far. This work provides a mild and controllable sonochemical method for regulating the phase structure of OECs to construct high-performance photoanodes.

Artificial photosynthesis: Promising approach for the efficient production of high-value bioproducts by microalgae

Recently, microalgae had received extensive attention for carbon capture and utilization. But its overall efficiency still could not reach a satisfactory degree. Artificial photosynthesis showed better efficiency in the conversion of carbon dioxide. However, artificial photosynthesis could generally only produce C1-C3 organic matters at present. Some studies showed that heterotrophic microalgae can efficiently synthesize high value organic matters by using simple organic matter such as acetate. Therefore, the combination of artificial photosynthesis with heterotrophic microalgae culture showed great potential for efficient carbon capture and high-value organic matter production. This article systematically analyzed the characteristics and challenges of carbon dioxide conversion by microalgae and artificial photosynthesis. On this basis, the coupling mode and development trend of artificial photosynthesis combined with microalgae culture were discussed. In summary, the combination of artificial photosynthesis and microalgae culture has great potential in the field of carbon capture and utilization, and deserves further study.

Cocatalysts-Photoanode Interface in Photoelectrochemical Water Splitting: Understanding and Insights

Sluggish oxygen evolution reactions on photoanode surfaces severely limit the application of photoelectrochemical (PEC) water splitting. The loading of cocatalysts on photoanodes has been recognized as the simplest and most efficient optimization scheme, which can reduce the surface barrier, provide more active sites, and accelerate the surface catalytic reaction kinetics. Nevertheless, the introduction of cocatalysts inevitably generates interfaces between photoanodes and oxygen evolution cocatalysts (Ph/OEC), which causes severe interfacial recombination and hinders the carrier transfer. Recently, many researchers have focused on cocatalyst engineering, while few have investigated the effect of the Ph/OEC interface. Hence, to maximize the advantages of cocatalysts, interfacial problems for designing efficient cocatalysts are systematically introduced. In this review, the interrelationship between the Ph/OEC and PEC performance is classified and some methods for characterizing Ph/OEC interfaces are investigated. Additionally, common interfacial optimization strategies are summarized. This review details cocatalyst-design-based interfacial problems, provides ideas for designing efficient cocatalysts, and offers references for solving interfacial problems.

Popcorn-stick-like NH2-UiO-66/TiO2 nanotube nanocomposites toward optimized photocatalytic carbon oxidation with nitrogen dioxide

Developing photocatalytic technologies for pollutants removal with high harmless product selectivity is a significant challenge. Construction and optimization of nanocomposites junction with appropriate band alignments is an effective method for achieving this objective. Herein, a unique popcorn-stick-like NH2-UiO-66/TiO2 nanotube nanocomposites with staggered band alignment is fabricated. The small metal organic frameworks (MOFs) particles with diameters around 20 nm are uniformly dispersed on the surface of TiO2 nanoplates, creating a popcorn-stick-like structure. The resulting as-synthesized nanocomposites photocatalysts show distinguished photocatalytic activity for simultaneous removal of carbon particles and nitrogen dioxide with 100% NO2 conversion and 99% N2 selectivity, about 3.9 times higher than that of pristine TiO2. The significant enhancement is attributed to the rapid charge separation and transfer in TiO2 and NH2-UiO-66 interface and the visible light absorption. The enhanced charge transfer follows double charge transfer mechanism, which is confirmed by surface photovoltage spectroscopy, photoluminescence, transient photocurrent measurements, and electrochemical impedance spectroscopy. This study demonstrates the potential for the simultaneously removal of two pollutants using the composite of TiO2 and MOF materials with high surface area and visible light absorption ability, thereby providing the possible applications of NH2-UiO-66/TiO2 composites in environmental remediation including air purification and wastewater treatment.

Bismuth Vanadate and 3D Graphene Composite Photoanodes for Enhanced Photoelectrochemical Oxidation of Water

Bismuth vanadate (BiVO4) has been one of the most promising photoanodes for the photoelectrochemical (PEC) water oxidation process. Efforts are still on to overcome the drawbacks of this photoanode to enhance the catalytic efficiency and improve the stability. In the present work, three-dimensional graphene (3D-G) was incorporated inside the BiVO4 matrix, primarily to improve the conductivity of the material. The photoanodes are fabricated with the incorporation of a SnO2 heterojunction and application of cobalt borate (Co-Bi) as a cocatalyst. The incorporation of 3D-G has enhanced the photocurrent from 0.72 o 1.21 mA cm-2 in ITO/SnO2/BiVO4 and ITO/SnO2/3D-G-BiVO4 materials; the photocurrent has been improved from 0.89 to 1.52 mA cm-2 in ITO/SnO2/BiVO4/Co-Bi and ITO/SnO2/3D-G-BiVO4. Semiconductor properties are evaluated from the Mott-Schottky measurements, and the charge transfer and transport kinetics of the PEC process are measured from several photoelectrochemical investigations. Both the charge transport and the charge transfer efficiencies are enhanced upon inclusion of 3D-G into the catalyst system. The lifetime of the charge carrier is observed to be increased. The decrease in the decay kinetics of the holes, enhancement in the open-circuit photovoltage (OCPV), and the resulting modulation of the surface states are responsible for the enhancement in the surface charge transfer process due to the inclusion of 3D-G into the catalytic system. Therefore, the additional role of 3D-G in the modulation of the surface states and release of the Fermi level pinning has made the band alignment between the semiconductor and the analyte better, which resulted in enhanced catalytic performance in the photoelectrochemical oxidation of water.

Chelated Ion-Exchange Strategy toward BiOCl Mesoporous Single-Crystalline Nanosheets for Boosting Photocatalytic Selective Aromatic Alcohols Oxidation

The photoresponse and photocatalytic efficiency of bismuth oxychloride (BiOCl) are greatly limited by rapid recombination of photogenerated carriers. The construction of porous single-crystal BiOCl photocatalyst can effectively alleviate this issue and provide accessible active sites. Herein, a facile chelated ion-exchange strategy is developed to synthesize BiOCl mesoporous single-crystalline nanosheets (BiOCl MSCN) using acetic acid and ammonia solution respectively as chelating agent and ionization promoter. The strong chelation between acetate ions and Bi³⁺ ions introduces acetate ions into the precipitated product to exchange with Cl^- ions, resulting in large lattice mismatch, strain release, and formation of void-like mesopores. The prepared BiOCl MSCN photocatalyst exhibits excellent catalytic performance with 99% conversion and 98% selectivity for oxidation of benzyl alcohol to benzaldehyde and superior general adaptability for various aromatic alcohols. The theoretical calculations and characterizations confirm that the superior performance is mainly attributed to the abundant oxygen vacancies, plenty of accessible adsorption/active sites and fast charge transport path without grain boundaries.

Recent Progress in Interface Engineering of Nanostructures for Photoelectrochemical Energy Harvesting Applications

With rapid and continuous consumption of nonrenewable energy, solar energy can be utilized to meet the energy requirement and mitigate environmental issues in the future. To attain a sustainable society with an energy mix predominately dependent on solar energy, photoelectrochemical (PEC) device, in which semiconductor nanostructure-based photocatalysts play important roles, is considered to be one of the most promising candidates to realize the sufficient utilization of solar energy in a low-cost, green, and environmentally friendly manner. Interface engineering of semiconductor nanostructures has been qualified in the efficient improvement of PEC performances including three basic steps, i.e., light absorption, charge transfer/separation, and surface catalytic reaction. In this review, recently developed interface engineering of semiconductor nanostructures for direct and high-efficiency conversion of sunlight into available forms (e.g., chemical fuels and electric power) are summarized in terms of their atomic constitution and morphology, electronic structure and promising potential for PEC applications. Extensive efforts toward the development of high-performance PEC applications (e.g., PEC water splitting, PEC photodetection, PEC catalysis, PEC degradation and PEC biosensors) are also presented and appraised. Last but not least, a brief summary and personal insights on the challenges and future directions in the community of next-generation PEC devices are also provided.

Photochemically Etching BiVO4 to Construct Asymmetric Heterojunction of BiVO4 /BiOx Showing Efficient Photoelectrochemical Water Splitting

BiVO₄ as a promising semiconductor candidate of the photoanode for solar driven water oxidation always suffers from poor charge carrier transport property and photo-induced self-corrosion. Herein, by intentionally taking advantage of the photo-induced self-corrosion process, a controllable photochemical etching method is developed to rationally construct a photoanode of BiVO₄ /BiO_x asymmetric heterojunction from faceted BiVO₄ crystal arrays. Compared with the BiVO₄ photoanode, the resulting BiVO₄ /BiO_x photoanode gains over three times enhancement in short-circuit photocurrent density (≈3.2 mA cm^-2 ) and ≈75 mV negative shift of photocurrent onset potential. This is due to the formation of the strong interacted homologous heterojunction, which promotes photo-carrier separation and enlarges photovoltage across the interface. Remarkably, the photocurrent density can remain at ≈2.0 mA cm^-2 even after 12 h consecutive operation, while only ≈0.1 mA cm^-2 is left for the control photoanode of BiVO₄ . Moreover, the Faraday efficiency for water splitting is determined to be nearly 100% for the BiVO₄ /BiO_x photoanode. The controllable photochemical etching process may shed light on the construction of homologous heterojunction on other photoelectrode materials that have similar properties to BiVO₄ .

Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations-Part 2: Porous 2D Nanomaterials

This article discusses the features of the synthesis and application of porous two-dimensional nanomaterials in developing conductometric gas sensors based on metal oxides. It is concluded that using porous 2D nanomaterials and 3D structures based on them is a promising approach to improving the parameters of gas sensors, such as sensitivity and the rate of response. The limitations that may arise when using 2D structures in gas sensors intended for the sensor market are considered.

Improving Performance of an Integrated Solar Flow Battery by Cr- and Cu-Doped TiO2 Photoelectrodes

This work reports on the preparation of Cr-doped TiO2 (Cr−TiO2), Cu-doped (Cu-TiO2), and its utilization in the photoanode of a solar redox flow battery (SRFB). A pure TiO2 electrode, Cr-doped TiO2 electrode, and Cu-doped TiO2 electrode coated with different layers are prepared by the sol-gel method. XRD, XPS, and SEM are used to characterize the relevant data of the electrode. All three electrodes show the structure of the anatase phase, but the Cu-TiO2 and Cr-TiO2 electrodes are more crystalline. Using these materials as photoelectrodes to prepare integrated solar flow cells, the semi-cell and full-cell tests show that the doping of Cr and Cu improves the efficiency and charging current of solar cells. The average charging currents of the Cu-TiO2 and Cr-TiO2 electrodes are 384.20 μA and 450.75 μA, respectively, compared with the TiO2 electrode; this increment reaches values of 71.23% and 100.97%.

Hydrothermal Synthesized CoS2 as Efficient Co-Catalyst to Improve the Interfacial Charge Transfer Efficiency in BiVO4

The bare surface of BiVO4 photoanode usually suffers from extremely low interfacial charge transfer efficiency which leads to a significantly suppressed photoelectrochemical water splitting performance. Various strategies, including surface modification and the loading of co-catalysts, facilitate the interface charge transfer process in BiVO4. In this study, we demonstrate that CoS2 synthesized from the hydrothermal method can be used as a high-efficient co-catalyst to sufficiently improve the interface charge transfer efficiency in BiVO4. The photoelectrochemical water splitting performance of BiVO4 was significantly improved after CoS2 surface modification. The BiVO4/CoS2 photoanode achieved an excellent photocurrent density of 5.2 mA/cm2 at 1.23 V versus RHE under AM 1.5 G illumination, corresponding to a 3.7 times enhancement in photocurrent compared with bare BiVO4. The onset potential of the BiVO4/CoS2 photoanode was also negatively shifted by 210 mV. The followed systematic combined optical and electrochemical characterization results reveal that the interfacial charge transfer efficiency of BiVO4 was largely improved from less than 20% to more than 70% due tor CoS2 surface modification. The further surface carrier dynamics study performed using an intensity modulated photocurrent spectroscopy displayed a 6–10 times suppression in surface recombination rate constants for CoS2 modified BiVO4, which suggests that the key reason for the improved interfacial charge transfer efficiency possibly originates from the passivated surface states due to the coating of CoS2.

Defect Engineering and Surface Polarization of TiO2 Nanorod Arrays toward Efficient Photoelectrochemical Oxygen Evolution

The relatively low photo-conversion efficiencies of semiconductors greatly restrict their real-world practices toward photoelectrochemical water splitting. In this work, we demonstrate the fabrication of TiO2-x nanorod arrays enriched with oxygen defects and surface-polarized hydroxyl groups by a facile surface reduction method. The oxygen defects located in the bulk/surface of TiO2-x enable fast charge transport and act as catalytically active sites to accelerate the water oxidation kinetics. Meanwhile, the hydroxyl groups could establish a surface electric field by polarization, for efficient charge separation. The as-optimized TiO2-x nanorod photoanode achieves a high photocurrent density of 2.62 mA cm−2 without any cocatalyst loading at 1.23 VRHE under 100 mW cm−2, which is almost double that of the bare TiO2 counterpart. Notably, the surface charge separation and injection efficiency of the TiO2-x photoanode reach as high as 80% and 97% at 1.23 VRHE, respectively, and the maximum incident photon-to-current efficiency reaches 90% at 400 nm. This work provides a new surface treatment strategy for the development of high-performance photoanodes in photoelectrochemical water splitting.

Recent Advances in TiO2-based Photoanodes for Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting has attracted a great attention in the past several decades which holds great promise to address global energy and environmental issues by converting solar energy into hydrogen. However, its low solar-to-hydrogen (STH) conversion efficiency remains a bottleneck for practical application. Developing efficient photoelectrocatalysts with high stability and high STH conversion efficiency is one of the key challenges. As a typical n-type semiconductor, titanium dioxide (TiO 2 ) exhibits high PEC water splitting performance, especially high chemical and photo stability. But, TiO 2 has also disadvantages such as wide band gap and fast electron-hole recombination rate, which seriously hinder its PEC performance. This review focuses on recent development in TiO 2 -based photoanodes as well as some key fundamentals. The corresponding mechanisms and key factors for high STH, and controllable synthesis and modification strategies are highlighted in this review. We conclude finally with an outlook providing a critical perspective on future trends on TiO 2 -based photoanodes for PEC water splitting.

On the Morphology of Nanostructured TiO2 for Energy Applications: The Shape of the Ubiquitous Nanomaterial

Nanostructured titania is one of the most commonly encountered constituents of nanotechnology devices for use in energy-related applications, due to its intrinsic functional properties as a semiconductor and to other favorable characteristics such as ease of production, low toxicity and chemical stability, among others. Notwithstanding this diffusion, the quest for improved understanding of the physical and chemical mechanisms governing the material properties and thus its performance in devices is still active, as testified by the large number of dedicated papers that continue to be published. In this framework, we consider and analyze here the effects of the material morphology and structure in determining the energy transport phenomena as cross-cutting properties in some of the most important nanophase titania applications in the energy field, namely photovoltaic conversion, hydrogen generation by photoelectrochemical water splitting and thermal management by nanofluids. For these applications, charge transport, light transport (or propagation) and thermal transport are limiting factors for the attainable performances, whose dependence on the material structural properties is reviewed here on its own. This work aims to fill the gap existing among the many studies dealing with the separate applications in the hope of stimulating novel cross-fertilization approaches in this research field.

Engineering exposed vertical nano-TiO2 (001) facets/BiOI nanosheet heterojunction film for constructing a satisfactory PEC glucose oxidase biosensor

In the field of photoelectrochemical (PEC) enzyme biosensors, constructing efficient photoelectrodes, in which the recombination of photogenerated carriers is an important factor affecting the performance, is of great significance. Herein, to enhance the separation efficiency of photogenerated carriers, titanium dioxide (TiO₂) nanosheet (NS)/bismuth oxyiodide (BiOI) NS/glucose oxidase (GOx) composites were prepared via hydrothermal and solvothermal methods. Single-crystal anatase TiO₂ NSs with a high percentage of (001) facets lead to better photocarrier separation due to heterojunctions between facets. After coupling with BiOI NSs, the photoelectrochemical performance of the electrode was greatly improved. The photogenerated electrons from TiO₂ and BiOI gathered at TiO₂ (101) and were exported through the fluorine-doped tin oxide (FTO) substrate to generate electrical signals. Photogenerated holes were transferred to TiO₂ (001) and BiOI to participate in the enzymatic reaction, showing the outstanding separation of electrons and holes. The prepared TiO₂ NS/BiOI NS/GOx glucose biosensor achieved satisfactory results, with sensitivity of 14.25 μA mM⁻¹ cm⁻², a linear measurement range of 0–1 mM, and a limit of detection (3S/N) of 0.01 mM in phosphate buffered saline (PBS) at a pH of 7.4. The mechanism for the efficient separation of photogenerated carriers based on the facet heterojunctions introduced in this paper also provides new insights into other optoelectronic biosensors.

Demonstration of the mechanism based on the synergistic effect of TiO₂ facet heterojunctions and TiO₂/BiOI heterojunctions to promote efficient separation of photogenerated carriers.

Emerging Surface, Bulk, and Interface Engineering Strategies on BiVO4 for Photoelectrochemical Water Splitting

The photoelectrochemical (PEC) cell that collects and stores abundant sunlight to hydrogen fuel promises a clean and renewable pathway for future energy needs and challenges. Monoclinic bismuth vanadate (BiVO₄ ), having an earth-abundancy, nontoxicity, suitable optical absorption, and an ideal n-type band position, has been in the limelight for decades. BiVO₄ is a potential photoanode candidate due to its favorable outstanding features like moderate bandgap, visible light activity, better chemical stability, and cost-effective synthesis methods. However, BiVO₄ suffers from rapid recombination of photogenerated charge carriers that have impeded further improvements of its PEC performances and stability. This review presents a close look at the emerging surface, bulk, and interface engineering strategies on BiVO₄ photoanode. First, an effective approach of surface functionalization via different cocatalysts to improve the surface kinetics of BiVO₄ is discussed. Second, state-of-the-art methodologies such as nanostructuring, defect engineering, and doping to further enhance light absorption and photogenerated charge transport in bulk BiVO₄ are reviewed. Third, interface engineering via heterostructuring to improve charge separation is introduced. Lastly, perspectives on the foremost challenges and some motivating outlooks to encourage the future research progress in this emerging frontier are offered.

Insight into the Roles of Metal Loading on CO2 Photocatalytic Reduction Behaviors of TiO2

The photocatalytic reduction of carbon dioxide (CO₂) into value-added chemicals is considered to be a green and sustainable technology, and has recently gained considerable research interest. In this work, titanium dioxide (TiO₂) supported Pt, Pd, Ni, and Cu catalysts were synthesized by photodeposition. The formation of various metal species on an anatase TiO₂ surface, after ultraviolet (UV) light irradiation, was investigated insightfully by the X-ray absorption near edge structure (XANES) technique. CO₂ reduction under UV-light irradiation at an ambient pressure was demonstrated. To gain an insight into the charge recombination rate during reduction, the catalysts were carefully investigated by the intensity modulated photocurrent spectroscopy (IMPS) and photoluminescence spectroscopy (PL). The catalytic behaviors of the catalysts were investigated by density functional theory using the self-consistent Hubbard U-correction (DFT+U) approach. In addition, Mott–Schottky measurement was employed to study the effect of energy band alignment of metal-semiconductor on CO₂ photoreduction. Heterojunction formed at Pt-, Pd-, Ni-, and Cu-TiO₂ interface has crucial roles on the charge recombination and the catalytic behaviors. Furthermore, it was found that Pt-TiO₂ provides the highest methanol yield of 17.85 µmol/g_cat/h, and CO as a minor product. According to the IMPS data, Pt-TiO₂ has the best charge transfer ability, with the mean electron transit time of 4.513 µs. We believe that this extensive study on the junction between TiO₂ could provide a profound understanding of catalytic behaviors, which will pave the way for rational designs of novel catalysts with improved photocatalytic performance for CO₂ reduction.

Surface plasmon-driven photoelectrochemical water splitting of a Ag/TiO2 nanoplate photoanode

A silver/titanium dioxide nanoplate (Ag/TiO2 NP) photoelectrode was designed and fabricated from vertically aligned TiO2 nanoplates (NP) decorated with silver nanoparticles (NPs) through a simple hydrothermal synthesis and electrodeposition route. The electrodeposition times of Ag NPs on the TiO2 NP were crucial for surface plasmon-driven photoelectrochemical (PEC) water splitting performance. The Ag/TiO2 NP at the optimal deposition time of 5 min with a Ag element content of 0.53 wt% demonstrated a remarkably high photocurrent density of 0.35 mA cm-2 at 1.23 V vs. RHE under AM 1.5G illumination, which was 5 fold higher than that of the pristine TiO2 NP. It was clear that the enhanced light absorption properties and PEC performance for Ag/TiO2 NP could be effectively adjusted by simply controlling the loading amounts of metallic Ag NPs (average size of 10-30 nm) at different electrodeposition times. The superior PEC performance of the Ag/TiO2 NP photoanode was attributed to the synergistic effects of the plasmonic Ag NPs and the TiO2 nanoplate. Interestingly, the plasmonic effect of Ag NPs not only increased the visible-light response (λ max = 570 nm) of TiO2 but also provided hot electrons to promote photocurrent generation and suppress charge recombination. Importantly, this study offers a potentially efficient strategy for the design and fabrication of a new type of TiO2 hybrid nanostructure with a plasmonic enhancement for PEC water splitting.

Single-Crystal Nanostructure Arrays Forming Epitaxially through Thermomechanical Nanomolding

For nanostructures in advanced electronic and plasmonic systems, a single-crystal structure with controlled orientation is essential. However, the fabrication of such devices has remained challenging, as current nanofabrication methods often suffer from either polycrystalline growth or the difficulty of integrating single crystals with substrates in desired orientations and locations to create functional devices. Here we report a thermomechanical method for the controlled growth of single-crystal nanowire arrays, which enables the simultaneous synthesis, alignment, and patterning of nanowires. Within such diffusion-based thermomechanical nanomolding (TMNM), the substrate material diffuses into nanosized cavities under an applied pressure gradient at a molding temperature of ∼0.4 times the material's melting temperature. Vertically grown face-centered cubic (fcc) nanowires with the [110] direction in an epitaxial relationship with the (110) substrate are demonstrated. The ability to control the crystal structure through the substrate takes TMNM a major step further, potentially allowing all fcc and body-centered cubic (bcc) materials to be integrated as single crystals into devices.

Enhancing Photocatalytic Hydrogen Production via the Construction of Robust Multivariate Ti-MOF/COF Composite

Titanium metal-organic frameworks (Ti-MOFs), as an appealing type of artificial photocatalysts, have shown great potentials in the field of solar energy conversion due to their well-studied photo-redox activity similar to TiO 2 and good optical responsiveness of linkers serving as the antenna to absorb visible-light. Although enormous efforts have been dedicated to developing Ti-MOFs with high photocatalytic activity, their solar energy conversion performances are still poor. Herein, a covalent-integrated strategy has been implemented to construct a series of multivariate Ti-MOF/COF hybrid materials, PdTCPP⸦PCN-415(NH 2 )/TpPa (composites 1, 2, and 3), featuring excellent visible-light utilization, suitable band gap, and high surface area for photocatalytic H 2 production. Notably, the resulting composites demonstrated remarkably enhanced visible-light-driven photocatalytic H 2 evolution performance, especially for the composite 2 with the maximum H 2 evolution rate of 13.98 mmol g -1 h -1 (turn-over frequency (TOF) = 227 h -1 ), which is much higher than the prototypical counterparts, PdTCPP⸦PCN-415(NH 2 ) (0.21 mmol g -1 h -1 ) and TpPa (6.51 mmol g -1 h -1 ). Our work thereby suggests a new approach to develop highly efficient photocatalysts for photocatalytic H 2 evolution reaction and beyond.

Vacancy defect engineering of BiVO4 photoanodes for photoelectrochemical water splitting

Photoelectrochemical (PEC) water splitting has been regarded as a promising technology for sustainable hydrogen production. The development of efficient photoelectrode materials is the key to improve the solar-to-hydrogen (STH) conversion efficiency towards practical application. Bismuth vanadate (BiVO₄) is one of the most promising photoanode materials with the advantages of visible light absorption, good chemical stability, nontoxic feature, and low cost. However, the PEC performance of BiVO₄ photoanodes is limited by the relatively short hole diffusion length and poor electron transport properties. The recent rapid development of vacancy defect engineering has significantly improved the PEC performance of BiVO₄. In this review article, the fundamental properties of BiVO₄ are presented, followed by an overview of the methods for creating different kinds of vacancy defects in BiVO₄ photoanodes. Then, the roles of vacancy defects in tuning the electronic structure, promoting charge separation, and increasing surface photoreaction kinetics of BiVO₄ photoanodes are critically discussed. Finally, the major challenges and some encouraging perspectives for future research on vacancy defect engineering of BiVO₄ photoanodes are presented, providing guidelines for the design of efficient BiVO₄ photoanodes for solar fuel production.

A strategy for preparing high-efficiency and economical catalytic electrodes toward overall water splitting

Electrolyzing water technology to prepare high-purity hydrogen is currently an important field in energy development. However, the preparation of efficient, stable, and inexpensive hydrogen production technology from electrolyzed water is a major problem in hydrogen energy production. The key technology for hydrogen production from water electrolysis is to prepare highly efficient catalytic, stable and durable electrodes, which are used to reduce the overpotential of the hydrogen evolution reaction and the oxygen evolution reaction of electrolyzed water. The main strategies for preparing catalytic electrodes include: (i) choosing cheap, large specific surface area and stable base materials, (ii) modulating the intrinsic activity of the catalytic material through elemental doping and lattice changes, and (iii) adjusting the morphology and structure to increase the catalytic activity. Based on these findings, herein, we review the recent work in the field of hydrogen production by water electrolysis, introduce the preparation of catalytic electrodes based on nickel foam, carbon cloth and new flexible materials, and summarize the catalytic performance of metal oxides, phosphides, sulfides and nitrides in the hydrogen evolution and oxygen evolution reactions. Secondly, parameters such as the overpotential, Tafel slope, active site, turnover frequency, and stability are used as indicators to measure the performance of catalytic electrode materials. Finally, taking the material cost of the catalytic electrode as a reference, the successful preparations are comprehensively compared. The overall aim is to shed some light on the exploration of high-efficiency and economical electrodes in energy chemistry and also demonstrate that there is still room for discovering new combinations of electrodes including base materials, composition lattice changes and morphologies.

Core-shell structure of sulphur vacancies-CdS@CuS: Enhanced photocatalytic hydrogen generation activity based on photoinduced interfacial charge transfer

To regulate the charge flow of the photocatalyst in photocatalytic hydrogen reactions is highly desirable. In this study, a highly efficient sulphur vacancies-CdS@CuS core-shell heterostructure photocatalyst (denoted CdS-SV@CuS) was developed through the surface modification of CdS-sulphur vacancies (SV) nanoparticles by CuS based on photoinduced interfacial charge transfer (IFCT). This novel photocatalyst with modulated charge transfer was prepared by hydrothermal treatment and subsequent cation-exchange reactions. The SV confined in CdS and the IFCT facilitate the charge carrier's efficient spatial separation. The optimized CdS-SV@CuS(5%) catalyst exhibited a remarkably higher H₂ production rate of 1654.53 μmol/g/h, approximately 6.7 and 4.0 times higher than those of pure CdS and CdS-SV, respectively. The high photocatalytic performance is attributed to the rapid charge separation, caused by the intimate interactions between CdS-SV and CuS in the core-shell heterostructure. This is the first time that a straightforward method is adopted to construct a metal sulphide core-shell structure for superior H₂-production activity by IFCT.

High UV and Sunlight Photocatalytic Performance of Porous ZnO Nanostructures Synthesized by a Facile and Fast Microwave Hydrothermal Method

The degradation of organic pollutants in wastewaters assisted by oxide semiconductor nanostructures has been the focus of many research groups over the last decades, along with the synthesis of these nanomaterials by simple, eco-friendly, fast, and cost-effective processes. In this work, porous zinc oxide (ZnO) nanostructures were successfully synthesized via a microwave hydrothermal process. A layered zinc hydroxide carbonate (LZHC) precursor was obtained after 15 min of synthesis and submitted to different calcination temperatures to convert it into porous ZnO nanostructures. The influence of the calcination temperature (300, 500, and 700 °C) on the morphological, structural, and optical properties of the ZnO nanostructureswas investigated. All ZnO samples were tested as photocatalysts in the degradation of rhodamine B (RhB) under UV irradiation and natural sunlight. All samples showed enhanced photocatalytic activity under both light sources, with RhB being practically degraded within 60 min in both situations. The porous ZnO obtained at 700 °C showed the greatest photocatalytic activity due to its high crystallinity, with a degradation rate of 0.091 and 0.084 min^-1 for UV light and sunlight, respectively. These results are a very important step towards the use of oxide semiconductors in the degradation of water pollutants mediated by natural sunlight.

Novel strategy of natural antioxidant nutrition quality evaluation in food: Oxidation resistance mechanism and synergistic effects investigation

Effective evaluation methods for assessing the nutritional quality of foods that eliminate free radicals (i.e., foods that are classified as antioxidants) have long attracted the attention of scientists and the populace. In this case, constructing a corresponding photoelectrochemical sensor that has the advantages of being intuitive, rapid, and capable of accurate assessment for global antioxidant capacity is of profound significance. In this study, a novel g-C₃N₄/NiS/TiO₂ photoelectric sensitive platform was constructed and afforded the possibility of a synergistic/antagonistic effect for estimating intrinsic antioxidant ingredients in food. Further investigation revealed that the internal influences of the compound structure, such as the redox potential and type of groups on the molecular benzene ring should be the main internal reasons for antioxidant synergistic behaviors. The photochemical strategy of concern is expected to provide benefits for on-site foods nutrition assays that should become a guide for health care diets.

Engineering Nanostructure-Interface of Photoanode Materials Toward Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water oxidation based on semiconductor materials plays an important role in the production of clean fuel and value-added chemicals. Nanostructure-interface engineering has proven to be an effective way to construct highly efficient PEC water oxidation photoanodes with good light capture, carrier transport, and water oxidation kinetics. However, from theoretical and application perspectives, the relationship between the nanostructure and interface of photoanode materials and their PEC performance remains unclear. In this review, the PEC water oxidation reaction mechanism and evaluation criteria are briefly presented. The theoretical basis and research status of the nanostructure-interface engineering on constructing high-performance PEC water oxidation photoanodes are summarized and discussed. Finally, the current challenges and the future opportunities of nanostructure-interface engineering for the PEC reactions are pointed out.

Transparent Stacked Photoanodes with Efficient Light Management for Solar-Driven Photoelectrochemical Cells

Solar-driven hydrogen generation is one of the most promising approaches for building a sustainable energy system. Photovoltaic-assisted photoanodes can help to reduce the overpotential of water splitting in photoelectrochemical (PEC) cells. Transparent photoanodes can improve light-conversion efficiency by absorbing high-energy photons while transmitting lower energy photons to the photocathode for hydrogen production. In this work, transparent photoanodes were implemented by forming metal-oxide junctions of NiO/TiO₂ heterostructures for creating the photovoltaic effect. The photovoltaic-induced transparent photoelectrode (PTPE) provides the photovoltage (0.7 V), which efficiently reduces the onset potential voltage by -0.38 V versus the reversible hydrogen electrode (RHE), as compared to 0.17 V versus RHE for a single-TiO₂ photoanode. The PEC cell has a high photocurrent of 1.68 mA at 1.23 V with respect to the RHE. The chemical endurance of metal-oxides maintains the stability of the PTPE for over 100 h in an alkaline electrolyte of 0.1 M KOH. The results of this study reveal that combining multiple PTPE cells to create a stacked photoanode enhances the photocurrent roughly in proportion to the number of PTPE cells. This design scheme for optimizing the light-conversion efficiency in a PTPE-photoanode system is promising for creating robust systems for on-site energy producers.

2D Nanomaterials for Effective Energy Scavenging

The development of a nation is deeply related to its energy consumption. 2D nanomaterials have become a spotlight for energy harvesting applications from the small-scale of low-power electronics to a large-scale for industry-level applications, such as self-powered sensor devices, environmental monitoring, and large-scale power generation. Scientists from around the world are working to utilize their engrossing properties to overcome the challenges in material selection and fabrication technologies for compact energy scavenging devices to replace batteries and traditional power sources. In this review, the variety of techniques for scavenging energies from sustainable sources such as solar, air, waste heat, and surrounding mechanical forces are discussed that exploit the fascinating properties of 2D nanomaterials. In addition, practical applications of these fabricated power generating devices and their performance as an alternative to conventional power supplies are discussed with the future pertinence to solve the energy problems in various fields and applications.

Hierarchical hyper-branched titania nanorods with tuneable selectivity for CO2 photoreduction

Utilising captured CO₂ and converting it into solar fuels can be extremely beneficial in reducing the constantly rising CO₂ concentration in the atmosphere while simultaneously addressing energy crisis issues. Hence, many researchers have focused their work on the CO₂ photoreduction reaction for the last 4 decades. Herein, the titania hyper-branched nanorod (HBN) thin films, with a novel hierarchical dendritic morphology, revealed enhanced CO₂ photoreduction performance. The HBNs exhibited enhanced photogenerated charge production (66%), in comparison with P25 (39%), due to the unique hyper-branched morphology. Furthermore, the proposed HBN thin films exhibited a high degree of control over the product selectivity, by undergoing a facile phase-altering treatment. The selectivity was shifted from 91% towards CO, to 67% towards CH₄. Additionally, the HBN samples showed the potential to surpass the conversion rates of the benchmark P25 TiO₂ in both CO and CH₄ production. To further enhance the selectivity and overall performance of the HBNs, RuO₂ was incorporated into the synthesis, which enhanced the CH₄ selectivity from 67% to 74%; whereas the incorporation of CuO revealed a selectivity profile comparative to P25.

The use of hierarchical 1–3D Hyper-Branched Nanorods (HBNs) is examined as a photocatalyst for CO₂ photoreduction, utilising a facile protonation treatment able to tune the selectivity of CO₂ photoreduction products between (91%) CO to (67%) CH₄.

Surface oxygen vacancies of TiO2 nanorods by electron beam irradiation for efficient photoelectrochemical water splitting

TiO₂ nanorods with oxygen vacancies are produced via a facial, controllable and scalable high energy electron beam irradiation treatment, resulting in a remarkable enhancement of photocurrent density of about 85.4% at 1.23 V_RHE.

A nano-surface monocrystalline BiVO4 nanoplate photoanode for enhanced photoelectrochemical performance

A nano-surface monocrystalline BiVO₄ photoanode with a large surface area is prepared by a low-cost and simple etching process.

Promoting superoxide generation in Bi2WO6 by less electronegative substitution for enhanced photocatalytic performance: an example of Te doping

Doping with elements with lower electronegativity, like Te, shifts the band potentials of Bi2WO6 to the point that superoxide radical generation is feasible. As a result, an optimum of 2.5 at% Te doping improves the activity of Bi2WO6 by 48 times.

Free radicals for cancer theranostics

Free radicals were generally regarded as highly reactive, transient and harmful species. In fact, some of the free radicals can also be inactive, long-lived and beneficial for our health. These properties of free radicals provide future possibilities for their application in various fields. Owning to their open-shell electronic structure, free radicals exhibit unique advantages in biomedical applications, such as high reactivity, photoacoustic and photothermal conversion ability, molecular magnetic. In this review, recent progress on free radicals and their applications in cancer theranostics are presented. Typical materials that exhibit controlled generation of free radicals and their applications for photodynamic therapy (PDT), chemodynamic therapy (CDT), sonodynamic therapy (SDT), gas therapy, hypoxic cancer treatment, photothermal therapy (PTT), photoacoustic imaging (PAI) and magnetic resonance imaging (MRI) are summarized and discussed.

An integrated thermoelectric-assisted photoelectrochemical system to boost water splitting

Common solar-driven photoelectrochemical (PEC) cells for water splitting were designed by using semiconducting photoactive materials as working photoelectrodes to capture sunlight. Due to the thermodynamic requirement of 1.23 eV and kinetic energy loss of about 0.6 eV, a photo-voltage of 1.8 V produced by PEC cells is generally required for spontaneous water splitting. Therefore, the minimum bandgap of 1.8 eV is demanded for photoactive materials in single-photoelectrode PEC cells, and the bandgap of about 1 eV for back photoactive materials is appropriate in tandem PEC cells. All these PEC cells cannot effectively utilize the infrared light from 1250 to 2500 nm. In order to realize the full spectrum utilization of solar light, here, we develop a solar-driven PEC water splitting system integrated with a thermoelectric device. The key feature of this system is that the thermoelectric device produces a voltage as an additional bias for the PEC system by using the temperature difference between the incident infrared-light heated aqueous electrolyte in the PEC cell as the hot source and unirradiated external water as the cold source. Compared to a reference PEC system without the thermoelectric device, this system has a significantly improved overall water splitting activity of 1.6 times and may provide a strategy for accelerating the application of full spectrum solar light-driven PEC cells for hydrogen production.

Single-Crystal Integrated Photoanodes Based on 4H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity

Photoelectrochemical (PEC) splitting of water into H₂ and O₂ by direct use of sunlight is an ideal strategy for the production of clean and renewable energy, which fundamentally relies on the exploration of advanced photoanodes with high performance. In the present work, we report that single-crystal integrated photoanodes, that is, 4H-SiC nanohole arrays (active materials) and SiC wafer substrate (current collector), are established into a totally single-crystal configuration without interfaces, which was based on a two-step electrochemical etching process. The as-fabricated SiC photoanode showed a rather low onset potential of -0.016 V vs reversible hydrogen electrode (RHE) and a high photocurrent density of 3.20 mA/cm² vs RHE 1.23 V, which were both superior to those of all reported SiC ones. Furthermore, such a rationally designed photoanode exhibited a fast photoresponse, wide photoresponse wavelength range, and long-term stability, representing its overall excellent PEC performance.

Carbon Black-Doped Anatase TiO2 Nanorods for Solar Light-Induced Photocatalytic Degradation of Methylene Blue

In this work, C-doped TiO₂ nanorods were synthesized through doping carbon black into hydrothermally synthesized solid-state TiO₂ nanowires (NWs) via calcination. The effects of carbon content on the morphology, phase structure, crystal structure, and photocatalytic property under both UV and solar light by the degradation of methylene blue (MB) were explored. Besides, the photoelectrochemical property of C-TiO₂ was systematically studied to illustrate the solar light degradation mechanism. After doping with C, TiO₂ NWs were reduced into nanorods and the surface became rough with dispersed particles. Results showed that C has successfully entered the TiO₂ lattice, resulting in the lattice distortion, reduction of band gap, and the formation of C-Ti-O, which expands TiO₂ to solar light activation. Comparing with P25 and anatase TiO₂ NWs, doping with carbon black showed much higher UV light and solar light photocatalytic activity. The photocatalytic activity was characterized via the degradation of MB, showing that K _ap was 0.0328 min^-1 under solar light, while 0.1634 min^-1 under UV irradiation. The main free radicals involved in methylene blue degradation are H⁺ and OH^•-. Doping with carbon black led to the reduction of photocurrent in a long-term operation, while C-doping reduced the electron-hole recombination and enhanced the carrier migration.

Lattice distortion induced internal electric field in TiO2 photoelectrode for efficient charge separation and transfer

Providing sufficient driving force for charge separation and transfer (CST) is a critical issue in photoelectrochemical (PEC) energy conversion. Normally, the driving force is derived mainly from band bending at the photoelectrode/electrolyte interface but negligible in the bulk. To boost the bulky driving force, we report a rational strategy to create effective electric field via controllable lattice distortion in the bulk of a semiconductor film. This concept is verified by the lithiation of a classic TiO₂ (Li-TiO₂) photoelectrode, which leads to significant distortion of the TiO₆ unit cells in the bulk with well-aligned dipole moment. A remarkable internal built-in electric field of ~2.1 × 10² V m^-1 throughout the Li-TiO₂ film is created to provide strong driving force for bulky CST. The photoelectrode demonstrates an over 750% improvement of photocurrent density and 100 mV negative shift of onset potential upon the lithiation compared to that of pristine TiO₂ film.

Electrodeposited Co-Substituted LaFeO3 for Enhancing the Photoelectrochemical Activity of BiVO4

Co-substituted LaFeO₃ was electrodeposited on the surface of BiVO₄ as a co-catalyst to enhance the water splitting performance. Compared to bare BiVO₄, the BiVO₄/Co-LaFeO₃ composite photoanode shows a water oxidation photocurrent of 3.4 mA/cm² at 1.23 V versus reverse hydrogen electrode, accompanied by a notable cathodic shift in the onset potential for 300 mV. Combined optical and electrochemical characterizations show that the solid/electrolyte charge transfer efficiency of BiVO₄ are dramatically improved by the incorporation of Co-substituted LaFeO₃. From the surface kinetic study of charge carriers by intensity-modulated photocurrent spectroscopy, a suppressed surface recombination rate constant is observed and the enhanced photoelectrochemical water splitting performance observed in the BiVO₄/Co-LaFeO₃ photoanode is attributed to the surface passivation effect of Co-substituted LaFeO₃.

Assembling of Bi atoms on TiO2 nanorods boosts photoelectrochemical water splitting of semiconductors

Low photoconversion efficiency, high charge transfer resistance and fast recombination rate are the bottlenecks of semiconductor nanomaterials in photoelectrochemical (PEC) water splitting, where the introduction of an appropriate co-catalyst is an effective strategy to improve their performance. In the present study, we have purposely designed atomic-scale dispersed bismuth (Bi) assembled on titanium dioxide nanorods (TiO2), and demonstrated its effective role as a co-catalyst in enhancing the PEC water splitting performance of TiO2. As a result, functionalized Bi/TiO2 generates a high photocurrent intensity at 1.23 VRHE under simulated solar light irradiation, which is 4-fold higher than that of pristine TiO2, exhibiting a significantly improved PEC performance for water splitting. The strategy presented in this study opens a new window for the construction of non-precious metals dispersed at atomic scales as efficient co-catalysts for realizing sustainable solar energy-driven energy conversion and storage.