In Situ Nanoparticle Embedding for Authentication of Epoxy Composites

Organic-inorganic covalent-ionic molecules for elastic ceramic plastic

Although organic-inorganic hybrid materials have played indispensable roles as mechanical^1-4, optical^5,6, electronic^7,8 and biomedical materials^9-11, isolated organic-inorganic hybrid molecules (at present limited to covalent compounds^12,13) are seldom used to prepare hybrid materials, owing to the distinct behaviours of organic covalent bonds¹⁴ and inorganic ionic bonds¹⁵ in molecular construction. Here we integrate typical covalent and ionic bonds within one molecule to create an organic-inorganic hybrid molecule, which can be used for bottom-up syntheses of hybrid materials. A combination of the organic covalent thioctic acid (TA) and the inorganic ionic calcium carbonate oligomer (CCO) through an acid-base reaction provides a TA-CCO hybrid molecule with the representative molecular formula TA₂Ca(CaCO₃)₂. Its dual reactivity involving copolymerization of the organic TA segment and inorganic CCO segment generates the respective covalent and ionic networks. The two networks are interconnected through TA-CCO complexes to form a covalent-ionic bicontinuous structure within the resulting hybrid material, poly(TA-CCO), which unifies paradoxical mechanical properties. The reversible binding of Ca²⁺-CO₃^2- bonds in the ionic network and S-S bonds in the covalent network ensures material reprocessability with plastic-like mouldability while preserving thermal stability. The coexistence of ceramic-like, rubber-like and plastic-like behaviours within poly(TA-CCO) goes beyond current classifications of materials to generate an 'elastic ceramic plastic'. The bottom-up creation of organic-inorganic hybrid molecules provides a feasible pathway for the molecular engineering of hybrid materials, thereby supplementing the classical methodology used for the manufacture of organic-inorganic hybrid materials.

Blue light-emitting fluorene–dendron hybridized polymers: optophysical features

In this manuscript, we have demonstrated an efficient and rapid synthetic strategy for preparation of new fluorene–dendron-hybridized blue light-emitting polymers P1–P7 by the reaction of 9,9 long-chain dialkylated fluorenes M2–M8 with dendronized monomer (M1) under microwave-assisted reaction condition. These fluorene–dendron-hybridized polymers P1–P7 were characterized using different spectroscopic techniques. Furthermore, the optophysical properties of these polymers P1–P7 were studied which revealed that these synthesized polymers P1–P7 have potential to emerge as capable materials in the development of diodes, particularly for blue light emission. In the future, similar approaches would be utilized for preparation of light-emitting polymer composite.

Economical gold recovery cycle from bio-sensing AuNPs: an application for nanowaste and COVID-19 testing kits

We report the controlled growth of biologically active compounds: gold nanoparticles (AuNPs) in various shapes, including their green synthesis, characterization, and studies of their applications towards biological, degradation and recycling. Using spectroscopic methods, studies on responsive binding mechanisms of AuNPs with biopolymers herring sperm deoxyribonucleic acid (hsDNA), bovine serum albumin (BSA), dyes degradation study, and exquisitely gold separation studies/recovery from nanowaste, COVID-19 testing kits, and pregnancy testing kits are discussed. The sensing ability of the AuNPs with biopolymers was investigated via various analytical techniques. The rate of degradation of various dyes in the presence and absence of AuNPs was studied by deploying stirring, IR, solar, and UV-Vis methods. AuNPs were found to be the most active cytotoxic agent against human breast cancer cell lines such as MCF-7 and MDAMB-468. Furthermore, an economical process for the recovery of gold traces from nanowaste, COVID-19 detection kits, and pregnancy testing kits was developed using inexpensive and eco-friendly α-cyclodextrin sugar. This method was found to be easy and safest in comparison with the universally accepted cyanidation process. In the future, small gold jewelry makers and related industries would benefit from the proposed gold-recycling process and it might contribute to their socio-economic growth. The methodologies proposed are also beneficial for trace-level forensic investigation.

Determination of Translaminar Notch Fracture Toughness for Laminated Composites Using Brazilian Disk Test

This paper evaluates the fracture of notched epoxy matrix composites using the Brazilian disk (BD) test from both numerical and experimental points of view. The study began with a comprehensive experimental program covering three different composite lay-ups (quasi-isotropic, unidirectional, and cross-ply) and various geometries of U and V notches. Specifically, the BD samples combined the three layouts, four different notch angles, and three notch radii with three specimens per combination, leading to an overall number of 108 fracture tests. The experiments showed the appropriateness of the BD test for the study of the fracture behavior of composite materials and provided a good pool of data for further investigations. Subsequently, the virtual isotropic material concept (VIMC) was applied in combination with two fracture criteria to theoretically predict the experimentally acquired fracture loads. This study demonstrated that using the VIMC approach can provide robust predictions while incurring much lower computational costs compared to the conventional approaches found in the literature.

Epoxy Composites Reinforced with ZnO from Waste Alkaline Batteries

The zinc alkaline battery is one of the most popular sources of portable electrical energy, with more than 300,000 tons being consumed per year. Accordingly, it is critical to recycle its components. In this work, we propose the use of zinc oxide (ZnO) microparticles recovered from worn-out batteries as fillers of epoxy resins. These nanocomposites can be used as protective coatings or pigments and as structural composites with high thermal stability. The addition of ceramic nanofillers, such as ZnO or/and TiO2, could enhance the thermal and mechanical properties, and the hardness and hydrophobicity, of the epoxy resins, depending on several factors. Accordingly, different nanocomposites reinforced with recycled ZnO and commercial ZnO and TiO2 nanoparticles have been manufactured with different nanofiller contents. In addition to the different ceramic oxides, the morphology and size of fillers are different. Recycled ZnO are“desert roses” such as microparticles, commercial ZnO are rectangular parallelepipeds nanoparticles, and commercial TiO2 are smaller spherical nanoparticles. The addition of ceramic fillers produces a small increase of the glass transition temperature (<2%), together with an enhancement of the barrier effect of the epoxy resin, reducing the water diffusion coefficient (<21%), although the maximum water uptake remains constant. The nanocomposite water absorption is fully reversible by subsequent thermal treatment, recovering its initial thermomechanical behavior. The water angle contact (WCA) also increases (~12%) with the presence of ceramic particles, although the highest hydrophobicity (35%) is obtained when the epoxy resin reinforced with recycled flowerlike ZnO microparticles is etched with acid stearic and acetic acid, inducing the corrosion of the ZnO on the surface and therefore the increment of the surface roughness. The presence of desert rose ZnO particles enhances the de lotus effect.

Click gold quantum dots biosynthesis with conjugation of quercetin for adenocarcinoma exertion

We developed a cost-effective and eco-friendly click biosynthesis of small molecule quercetin–gold quantum dots (QRT–AuQDs) involving quick conjugation using an ultrasonication method at ambient temperature by utilizing QRT and gold ions in the proportion of 0.1 : 1 (molar ratio). A comparatively very short amount of time (60 seconds) was required as compared to conventional procedures. The present biomimetics research relates to the isolation of bioactive QRT by the circularly spread silica gel layer technique (CSSGLT) and characterization (UV-Vis, FTIR, NMR and DSC analysis). Characterization of the synthesized QRT–AuQDs conjugated complex was carried out by UV-Vis, HR-TEM, DLS, zeta potential and X-ray diffraction. The main objective of the present work was to study the comparative anticancer activity of QRT and QRT–AuQDs on human lung cancer HOP-62 and leukemia K-562 cell lines. The results suggested that QRT–AuQDs showed potential for applications in anticancer treatment and were found to be a more cytotoxic agent in comparison to QRT, causing > 50% inhibition of cancer cells at the concentration < 10⁻⁷ M. Hence, small molecule conjugated QRT–AuQDs can be used as a promising material for biomedical, bioengineering and anti-infectives applications.

A cost-effective and eco-friendly click biosynthesis of small molecule quercetin–gold quantum dots (QRT–AuQDs) was developed involving quick conjugation, using an ultrasonication method at ambient temperature by utilizing QRT and gold ions in the molar ratio 0.1 : 1.

Enhancing intrinsic thermal conductivities of epoxy resins by introducing biphenyl mesogen-containing liquid crystalline co-curing agents

Epoxy resins were prepared with an enhanced intrinsic thermal conductivity of 0.42 W (m K)−1 using a biphenyl mesogen-containing co-curing agent.

Biological macromolecule chitosan grafted co-polymeric composite: bio-adsorption probe on cationic dyes

Chitosan biological macromolecule is a versatile polymer; chemical modification has been carried out that lead to the formation of chitosan grafted polymers composites (Chito-g-PC). We proposed synthesis of six various Chito-g-PC as sorbents for toxic dyes. A novel graft copolymerization method based on radical polymerization with vinyl monomer like acrylic acid, acrylamide, N-isopropylacrylamide, methacrylic acid and polyacrylonitrile were utilized in order to address the large amount of swelling at four different pH buffers solution. The effect of initiator and monomer concentration, time and temperature on % grafting and % grafting efficiency were performed. Comparative characterization of Chito and Chito-g-PC were evaluated by SEM, XRD and FTIR, as well as solubility characteristics of the composites were determined by various pH buffer solution. Cationic toxic dyes Malachite green (MG) and Methylene blue (MB) were selected as the sorbet, and Chito-g-PC were used as biosorbents. Thermodynamic analysis showed that the sorption process was spontaneous and endothermic with an increased randomness. The sorption experiments were realized with six different Chito-g-PC for MG and MB at various pH.

Storing and Reading Information in Mixtures of Fluorescent Molecules

The rapidly increasing use of digital technologies requires the rethinking of methods to store data. This work shows that digital data can be stored in mixtures of fluorescent dye molecules, which are deposited on a surface by inkjet printing, where an amide bond tethers the dye molecules to the surface. A microscope equipped with a multichannel fluorescence detector distinguishes individual dyes in the mixture. The presence or absence of these molecules in the mixture encodes binary information (i.e., "0" or "1"). The use of mixtures of molecules, instead of sequence-defined macromolecules, minimizes the time and difficulty of synthesis and eliminates the requirement of sequencing. We have written, stored, and read a total of approximately 400 kilobits (both text and images) with greater than 99% recovery of information, written at an average rate of 128 bits/s (16 bytes/s) and read at a rate of 469 bits/s (58.6 bytes/s).

Optical Management of CQD/AgNP@SiNW Arrays with Highly Efficient Capability of Dye Degradation

The facile synthetic method for the preparation of incorporated carbon quantum dots (CQDs)/Ag nanoparticles (AgNPs) with well-aligned silicon nanowire (SiNW) arrays is demonstrated, offering the superior photodegradation capabilities covering UV to visible wavelength regions. By examining the morphology, microstructure, crystallinity, chemical feature, surface groups, light-emitting, and reflection characteristics, these hybrid heterostructures are systematically identified. Moreover, the involving degradation kinetics, band diagram, cycling capability, and underlying mechanism of photodegradation are investigated, validating their remarkable and reliable photocatalytic performances contributed from the strongly reduced light reflectivity, superior capability of charge separation, and sound wettability with dye solutions.

Hydrophobic interpenetrating polyamide-PDMS membranes for desalination, pesticides removal and enhanced chlorine tolerance

Hydrophobic membranes for desalination and toxic organic pollutant removal have been fabricated using polyamide - PDMS (polydimethylsiloxane) chemistries in a one-step protocol. The curing of polyamide and PDMS are orthogonal and co-curing both networks imparts hydrophobicity to the thin film composite membranes. The membranes exhibit increased adsorption of pesticides from the feed water along with maintaining excellent salt rejection capability (97% NaCl rejection), thus giving the membranes a multifunctional character. Three toxic pesticides have been used in this study to demonstrate the viability of combining osmosis desalination technology with organic matter adsorption. The membranes also show excellent resistance to fouling by toxic pesticides (85% salt rejection vs 67% for commercial membranes in the presence of pesticides) and significantly improved chlorine tolerance (93.8% salt rejection vs 86.5% for commercial membranes after 20 h of exposure to sodium hypochlorite solution).

Nanocomposite of functional silver metal containing curcumin biomolecule model systems: Protein BSA bioavailability

Curcumin, a constituent of Curcuma longa L-Zingiberaceae is used in traditional Indian and worldwide medicine and shows anticancer and antioxidant properties. Curcumin has numerous biological and pharmacological activities but due to its hydrophobic nature, the major drawback is poor absorption and rapid elimination, rendering curcumin with the tag of a poor biomaterial. Hence, there is a need to develop functional metal containing curcumin model systems (FMCCMS) as a metallo-biomolecule to enhance the bioavailability of curcumin. We designed the interaction of silver metal ion with curcumin to form curcumin-silver nanocomposite (CURC-AgNCP) via ultrasonic synthetic route. Formations of FMCCMS were characterized by spectroscopic techniques. The crystalline face-centered cubic pattern and particle size of the nanocomposite was evaluated using X-ray diffraction and high-resolution transmission electron microscopy. The bonding of silver metal to curcumin was confirmed by X-ray photon spectroscopy. Interaction of the nanocomposite with bovine serum albumin (BSA) protein was performed using excitation, emission, and circular dichroism spectroscopy. In binding interaction of BSA, the negative value of ∆S° (-358.04 J mol^-1 K^-1) and ∆H° (-129.42 KJ mol^-1) demonstrates the hydrophilic nature of the nanocomposite. The binding distance r evaluated according to the Forster resonance energy transfer theory and was 4.69 nm for CURC-AgNCP, which suggested non-radiative transfer of energy between CURC-AgNCP and BSA. The role of FMCCMS metallo-biomolecule CURC-AgNCP in medicine for cancer activity can have immense importance and hence we performed Sulphorhodamine B based in-vitro cytotoxicity assay on human breast cancer Michigan Cancer Foundation-7 cell line.

Effect of a heterogeneous network on glass transition dynamics and solvent crack behavior of epoxy resins

In general, it has been widely accepted that the physical properties of an epoxy resin are strongly dependent on how it is prepared. However, a clear understanding of the mechanisms of the relationship at a molecular level has yet to be achieved. We here studied the glass transition dynamics and fracture behavior of four epoxy resins, which were pre-cured at different temperatures and well cured under the same conditions. Fourier-transform infrared spectroscopy revealed that the reaction kinetics for an epoxy-amine mixture were strongly dependent on the pre-curing temperature. The glass transition temperature of epoxy resins with the same cross-linking density was dependent on the pre-curing temperature. Dielectric relaxation spectroscopy and dynamic mechanical analysis revealed that the fragility index of the epoxy resin decreased with increasing pre-curing temperature, indicating that the network structure formed in it became more heterogeneous with increasing pre-curing temperature. Once the epoxy resin was immersed in a good solvent, it was partly swollen and was then macroscopically fractured. The fracture was initiated by the crack generation in an un-swollen region of the resin due to the stress induced upon swelling. The immersion time required to reach the fracture decreased as the extent of the heterogeneity increased. The knowledge here obtained should be useful for understanding and controlling fracture toughness of epoxy resins, leading to the furtherance of their functionalization.

"Shape-Coding": Morphology-Based Information System for Polymers and Composites

Fiber-reinforced composites have become the material of choice for aerospace structures because of their favorable strength-to-weight ratio. Given the increasing amounts of counterfeit composite parts showing up in the complex aerospace supply chain, it is absolutely vital to track a composite part throughout its lifecycle-from production to usage and to disposal. Existing barcoding methods are invasive, affect the structural properties of composites, and/or are vulnerable to tampering. We describe a universal method to store information in fiber-reinforced composites based on solid-state in situ reduction leading to embedded nanoparticles with controlled morphologies. This simple, cost-effective, mild, surfactant-free, and one-step protocol for the fabrication of embedded platinum nanostructures leads to morphology-based barcodes for polymeric composites. We also describe a coding methodology wherein a 1 × 1 cm code can represent 3.4 billion parts to 95 trillion parts, depending on the resolution required along with access to morphology-based chemical encryption systems.

Density Modulation of Embedded Nanoparticles via Spatial, Temporal, and Chemical Control Elements

Nanoparticle polymer composites have enabled material multifunctionalities that are difficult to obtain otherwise. A simple modification to a commercially available resin system enables a universal methodology to embed nanoparticles in resins via spatial, temporal, thermal, concentration, and chemical control parameters. Changes in nanoparticle density distribution are exploited to demonstrate dynamic optical and electronic properties that can be processed on-demand, without the need for expensive equipment or cleanroom facilities. This strategy provides access to the control of optical (cooperative plasmonic effects), electronic (insulator to a conductor), and chemical parameters (multimetal patterning). Using the same composite resin system, the followings are fabricated: i) diffraction gratings with tuneable diffraction efficiencies (10-78% diffraction efficiencies), ii) organic electrochemical transistors with a low drive voltage, and iii) embedded electrodes in confined spaces for potential diagnostic applications.