Integrated Perovskite/Bulk-Heterojunction Organic Solar Cells

The Promise and Challenges of Inverted Perovskite Solar Cells

Recently, there has been an extensive focus on inverted perovskite solar cells (PSCs) with a p-i-n architecture due to their attractive advantages, such as exceptional stability, high efficiency, low cost, low-temperature processing, and compatibility with tandem architectures, leading to a surge in their development. Single-junction and perovskite-silicon tandem solar cells (TSCs) with an inverted architecture have achieved certified PCEs of 26.15% and 33.9% respectively, showing great promise for commercial applications. To expedite real-world applications, it is crucial to investigate the key challenges for further performance enhancement. We first introduce representative methods, such as composition engineering, additive engineering, solvent engineering, processing engineering, innovation of charge transporting layers, and interface engineering, for fabricating high-efficiency and stable inverted PSCs. We then delve into the reasons behind the excellent stability of inverted PSCs. Subsequently, we review recent advances in TSCs with inverted PSCs, including perovskite-Si TSCs, all-perovskite TSCs, and perovskite-organic TSCs. To achieve final commercial deployment, we present efforts related to scaling up, harvesting indoor light, economic assessment, and reducing environmental impacts. Lastly, we discuss the potential and challenges of inverted PSCs in the future.

Doubling Power Conversion Efficiency of Si Solar Cells

Improving solar cells' power conversion efficiency (PCE) is crucial to further the deployment of renewable electricity. In addition, solar cells cannot function at exceedingly low temperatures owing to the carrier freeze-out phenomenon. This report demonstrates that through temperature regulation, the PCE of monocrystalline single-junction silicon solar cells can be doubled to 50-60% under monochromatic lasers and the full spectrum of AM 1.5 light at low temperatures of 30-50 K by inhibiting the lattice atoms' thermal oscillations for suppressing thermal loss, an inherent feature of monocrystalline Si cells. Moreover, the light penetration, determined by its wavelength, plays a critical role in alleviating the carrier freeze-out effect and broadening the operational temperature range of silicon cells to temperatures as low as 10 K. Understanding these new observations opens tremendous opportunities for designing solar cells with even higher PCE to provide efficient and powerful energy sources for cryogenic devices and outer and deep space explorations.

Dark Current in Broadband Perovskite-Organic Heterojunction Photodetectors Controlled by Interfacial Energy Band Offset

Lead halide perovskite and organic semiconductors are promising classes of materials for photodetector (PD) applications. State-of-the-art perovskite PDs have performance metrics exceeding silicon PDs in the visible. While organic semiconductors offer bandgap tunability due to their chemical design with detection extended into the near-infrared (NIR), perovskites are limited to the visible band and the first fraction of the NIR spectrum. In this work, perovskite-organic heterojunction (POH) PDs with absorption up to 950 nm are designed by the dual contribution of perovskite and the donor:acceptor bulk-heterojunction (BHJ), without any intermediate layer. The effect of the energetics of the donor materials is systematically studied on the dark current (Jd) of the device by using the PBDB-T polymer family. Combining the experimental results with drift-diffusion simulations, it is shown that Jd in POH devices is limited by thermal generation via deep trap states in the BHJ. Thus, the best performance is obtained for the PM7-based POH, which delivers an ultra-low noise current of 2 × 10-14 A Hz-1/2 and high specific detectivity of 4.7 × 1012 Jones in the NIR. Last, the application of the PM7-based POH devices as NIR pulse oximeter with high-accuracy heartbeat monitoring at long-distance of 2 meters is demonstrated.

Interface Engineering for Highly Efficient Organic Solar Cells

Organic solar cells (OSCs) have made dramatic advancements during the past decades owing to the innovative material design and device structure optimization, with power conversion efficiencies surpassing 19% and 20% for single-junction and tandem devices, respectively. Interface engineering, by modifying interface properties between different layers for OSCs, has become a vital part to promote the device efficiency. It is essential to elucidate the intrinsic working mechanism of interface layers, as well as the related physical and chemical processes that manipulate device performance and long-term stability. In this article, the advances in interface engineering aimed to pursue high-performance OSCs are reviewed. The specific functions and corresponding design principles of interface layers are summarized first. Then, the anode interface layer, cathode interface layer in single-junction OSCs, and interconnecting layer of tandem devices are discussed in separate categories, and the interface engineering-related improvements on device efficiency and stability are analyzed. Finally, the challenges and prospects associated with application of interface engineering are discussed with the emphasis on large-area, high-performance, and low-cost device manufacturing.

Reducing Interfacial Losses in Solution-Processed Integrated Perovskite-Organic Solar Cells

Low bandgap organic semiconductors have been widely employed to broaden the light response range to utilize much more photons in the inverted perovskite solar cells (PSCs). However, the serious charge recombination at the heterointerface contact between perovskite and organic semiconductors usually leads to large energy loss and limits the device performance. In this work, a titanium chelate, bis(2,4-pentanedionato) titanium(IV) oxide (C10H14O5Ti), was directly used as an interlayer between the perovskite layer and organic bulk heterojunction layer for the first time. Impressively, it was found that C10H14O5Ti can not only increase the surface potential of perovskite films but also show a positive passivation effect toward the perovskite film surface. Drawing from the above function, a smoother perovskite active layer with a higher work function was realized upon the use of C10H14O5Ti. As a result, the C10H14O5Ti-modified integrated devices show lower interfacial loss and obtain the best power conversion efficiency (PCE) of up to 20.91% with a high voltage of 1.15 V. The research offers a promising strategy to minimize the interfacial loss for the preparation of high-performance perovskite solar cells.

Probing the Effect of Photovoltaic Material on Voc in Ternary Polymer Solar Cells with Non-Fullerene Acceptors by Machine Learning

The power conversion efficiency (PCE) of ternary polymer solar cells (PSCs) with non-fullerene has a phenomenal increase in recent years. However, improving the open circuit voltage (V_oc) of ternary PSCs with non-fullerene still remains a challenge. Therefore, in this work, machine learning (ML) algorithms are employed, including eXtreme gradient boosting, K-nearest neighbor and random forest, to quantitatively analyze the impact mechanism of V_oc in ternary PSCs with the double acceptors from the two aspects of photovoltaic materials. In one aspect of photovoltaic materials, the doping concentration has the greatest impact on V_oc in ternary PSCs. Furthermore, the addition of the third component affects the energy offset between the donor and acceptor for increasing V_oc in ternary PSCs. More importantly, to obtain the maximum V_oc in ternary PSCs with the double acceptors, the HOMO and LUMO energy levels of the third component should be around (-5.7 ± 0.1) eV and (-3.6 ± 0.1) eV, respectively. In the other aspect of molecular descriptors and molecular fingerprints in the third component of ternary PSCs with the double acceptors, the hydrogen bond strength and aromatic ring structure of the third component have high impact on the V_oc of ternary PSCs. In partial dependence plot, it is clear that when the number of methyl groups is four and the number of carbonyl groups is two in the third component of acceptor, the V_oc of ternary PSCs with the double acceptors can be maximized. All of these findings provide valuable insights into the development of materials with high V_oc in ternary PSCs for saving time and cost.

Optimized Morphology Enables High-Efficiency Nonfullerene Ternary Organic Solar Cells

Tuning the three-dimensional morphology in the active layer is an effective method to improve the performance of bulk heterojunction organic solar cells (OSCs). In this work, an acceptor-donor-acceptor structured small molecule ST10-CN-1 was synthesized and employed as the guest donor to fabricate ternary OSCs based on a PBDB-T:IT-M host binary system. The incorporation of ST10-CN-1 could broaden the active layer's absorption range of solar light thereby leading to a promotional short-circuit current. Moreover, adding an appropriate amount of ST10-CN-1 could effectively regulate the morphology of the active layer in both the lateral direction and vertical stratification. All of these morphological alterations helped to speed up the exciton dissociation, charge transit, and charge collecting processes, which in turn increased the power conversion efficiency. As a result, an excellent PCE of 11.5% for the ternary device based on PBDB-T:IT-M:ST10-CN-1 was obtained. The enhanced PCE was also linked to the formation of an alloylike state between PBDB-T and ST10-CN-1, as evidenced by the fact that the open circuit voltage of ternary OSCs lay between those for PBDB-T:IT-M (0.925 V) and ST10-CN-1:IT-M (1.064 V). This work illustrates that refining the morphology of the active layer by incorporating an appropriate third component is an effective way to further enhance the device's performance.

Hybrid Block Copolymer/Perovskite Heterointerfaces for Efficient Solar Cells

Solution processable semiconductors like organics and emerging lead halide perovskites (LHPs) are ideal candidates for photovoltaics combining high performance and flexibility with reduced manufacturing cost. Moreover, the study of hybrid semiconductors would lead to advanced structures and deep understanding that will propel this field even further. Herein, a novel device architecture involving block copolymer/perovskite hybrid bulk heterointerfaces is investigated, such a modification could enhance light absorption, create an energy level cascade, and provides a thin hydrophobic layer, thus enabling enhanced carrier generation, promoting energy transfer and preventing moisture invasion, respectively. The resulting hybrid block copolymer/perovskite solar cell exhibits a champion efficiency of 24.07% for 0.0725 cm² -sized devices and 21.44% for 1 cm² -sized devices, respectively, together with enhanced stability, which is among the highest reports of organic/perovskite hybrid devices. More importantly, this approach has been effectively extended to other LHPs with different chemical compositions like MAPbI₃ and CsPbI₃ , which may shed light on the design of highly efficient block copolymer/perovskite hybrid materials and architectures that would overcome current limitations for realistic application exploration.

Integrated Ideal-Bandgap Perovskite/Bulk-Heterojunction Solar Cells with Efficiencies > 24

Here, the authors report a highly efficient integrated ideal-bandgap perovskite/bulk-heterojunction solar cell (IPBSC) with an inverted architecture, featuring a near infrared (NIR) polymer DTBTI-based bulk-heterojunction (BHJ) layer atop guanidinium bromide (GABr)-modified FA_0.7 MA_0.3 Pb_0.7 Sn_0.3 I₃ perovskite film as the photoactive layer. The IPBSC shows cascade-like energy level alignment between the charge-extractionlayer/perovskite/BHJ and efficient passivation effect of BHJ on perovskite. Thanks to the well-matched energy level alignment and high-quality ideal bandgap-based perovskite film, an efficient charge transfer occurs between the charge-extraction-layer/perovskite/BHJ. Moreover, the NIR polymer DTBTI on the perovskite film leads to an improved NIR light response for the IPBSC. In addition, the O, S and N atoms in the DTBTI polymer yield a strong interaction with perovskite, which is conducive to reducing the defects of the perovskite and suppressing charge recombination. As a result, the solar cell achieves a power conversion efficiency (PCE) of 24.27% (certificated value at 23.4% with 0.283-volt voltage loss), currently the recorded efficiency for both IPBSCs and Pb-Sn alloyed PSCs, and which is over the highest efficiency of perovskite-organic tandem solar cell. Moreover, the thermal, humidity and long-term operational stabilities of the IPBSCs are also significantly improved compared with the control PSCs.

Photovoltaic Cell Generations and Current Research Directions for Their Development

The purpose of this paper is to discuss the different generations of photovoltaic cells and current research directions focusing on their development and manufacturing technologies. The introduction describes the importance of photovoltaics in the context of environmental protection, as well as the elimination of fossil sources. It then focuses on presenting the known generations of photovoltaic cells to date, mainly in terms of the achievable solar-to-electric conversion efficiencies, as well as the technology for their manufacture. In particular, the third generation of photovoltaic cells and recent trends in its field, including multi-junction cells and cells with intermediate energy levels in the forbidden band of silicon, are discussed. We also present the latest developments in photovoltaic cell manufacturing technology, using the fourth-generation graphene-based photovoltaic cells as an example. An extensive review of the world literature led us to the conclusion that, despite the appearance of newer types of photovoltaic cells, silicon cells still have the largest market share, and research into ways to improve their efficiency is still relevant.

High-Performance 1 cm2 Perovskite-Organic Tandem Solar Cells with a Solvent-Resistant and Thickness-Insensitive Interconnecting Layer

Organic solar cells (OSCs) and perovskite solar cells (PVSCs) are promising candidates for next-generation thin film photovoltaic technologies. The integration of OSCs with PVSCs in tandem devices is now attracting significant attention due to their similar fabrication procedures and the potential to afford a higher device performance. Here, a thickness-insensitive and solvent-resistant interconnecting layer is developed to efficiently connect perovskite and organic subcells with low contact resistance. The resultant perovskite-organic tandem devices maintain high efficiencies over a wide thickness range of the interconnecting layer, from ∼20 nm to ∼50 nm, providing an easily fabricated, solvent-resistant platform to integrate perovskite and organic active layers with low-temperature solution processing techniques. The tandem devices containing an ultrathin PVSC and a typical non-fullerene OSC give a maximum efficiency of 19.2%, which is much higher than those of the single-junction devices. Moreover, highly reproducible 1 cm² perovskite-organic tandem devices are achieved using the thickness-insensitive and solvent-resistant interconnecting layer, and an efficiency of 17.8% is realized. These 1 cm² tandem solar cells are used successfully in solar-to-hydrogen systems to afford a solar-to-fuel conversion efficiency of 11.2%. Overall, these advances represent significant progress in the design of ultrathin and facile solution processed perovskite-organic tandem solar cells.

Double Cascading Charge Transfer at Integrated Perovskite/Organic Bulk Heterojunctions for Extended Near-Infrared Photoresponse and Enhanced Photocurrent

Nowadays, nearly 48.7% near-infrared (NIR) irradiation (>800 nm) of the full solar spectrum has actually not been fully utilized since the state-of-the-art perovskite film usually can only absorb the most UV-vis sunlight radiation. Herein, high efficiency integrated Cs_0.15 FA_0.85 PbI₃ perovskite/organic bulk (PC₆₁ BM:D18:Y6) heterojunction solar cells with enhanced low energy photon harvest until 931 nm and a high maintained open circuit voltage of 1.04 V is successfully obtained. In particular, the favorable double cascading charge transfer paths pave an interesting possibility to spatially separate electrons upon visible light excitation and holes upon NIR photon absorption simultaneously at interfaces, significantly suppressing non-radiative bimolecular recombination and reaching the photocurrent density as high as 27.48 mA cm^-2 and power conversion efficiency of 20.31%. Besides, the strong hydrophobicity of the ternary organic film has effectively prevented ambient humidity penetration and improves the stability of the perovskite in the continuous aging test (humidity > 60%) compared with the control device. This work has opened a significantly new window to improve the NIR light harvest for next generation highly efficient solar cells with full spectrum response.

Flexible organic optoelectronic devices on paper

Paper substrate has many advantages, such as low cost, bendable, foldable, printable, and environmentally friendly recycling. Nowadays, paper has been further extended as a flexible platform to deliver electronic information with the integration of organic optoelectronic devices, such as organic thin-film transistor, organic solar cell, organic electrochromic device, and organic light-emitting device. It has great potential to become the new generation of flexible substrate. Given rough surface and porous of paper, many efforts have been underway in recent years to enable the compatibility between optoelectronics and paper substrate. In this review, we present the development history of paper and its physicochemical properties, and summarize the current development of paper-based organic optoelectronic devices. We also discuss the challenges that need to be addressed before practical uses of paper-based organic optoelectronic devices.

Synthesis of Conjugated Donor-Acceptor Antiaromatic Porphyrins and Their Application to Perovskite Solar Cells

A conjugated donor-acceptor antiaromatic porphyrin, composed of an antiaromatic thieno-fused porphyrin structure and a diketopyrrolopyrrole mioety, was synthesized and applied in a perovskite solar cell for the first time. Enhanced light absorption in the device by the antiaromatic porphyrin resulted in a significantly increased power conversion efficiency of 19.3%.

Designs from single junctions, heterojunctions to multijunctions for high-performance perovskite solar cells

Hybrid metal-halide perovskite solar cells (PVSCs) have drawn unprecedented attention during the last decade due to their superior photovoltaic performance, facile and low-cost fabrication, and potential for roll-to-roll mass production and application for portable devices. Through collective composition, interface, and process engineering, a comprehensive understanding of the structure-property relationship and carrier dynamics of perovskites has been established to help achieve a very high certified power conversion efficiency (PCE) of 25.5%. Apart from material properties, the modified heterojunction design and device configuration evolution also play crucial roles in enhancing the efficiency. The adoption and/or modification of heterojunction structures have been demonstrated to effectively suppress the carrier recombination and potential losses in PVSCs. Moreover, the employment of multijunction structures has been shown to reduce thermalization losses, achieving a high PCE of 29.52% in perovskite/silicon tandem solar cells. Therefore, understanding the evolution of the device configuration of PVSCs from single junction, heterojunction to multijunction designs is helpful for the researchers in this field to further boost the PCE beyond 30%. Herein, we summarize the evolution and progress of the single junction, heterojunction and multijunction designs for high-performance PVSCs. A comprehensive review of the fundamentals and working principles of these designs is presented. We first introduce the basic working principles of single junction PVSCs and the intrinsic properties (such as crystallinity and defects) in perovskite films. Afterwards, the progress of diverse heterojunction designs and perovskite-based multijunction solar cells is synopsized and reviewed. Meanwhile, the challenges and strategies to further enhance the performance are also summarized. At the end, the perspectives on the future development of perovskite-based solar cells are provided. We hope this review can provide the readers with a quick catchup on this emerging solution-processable photovoltaic technology, which is currently at the transition stage towards commercialization.

Future directions of material chemistry and energy chemistry

Energy is an important substantial foundation for the survival and development of humans. However, the over-consumption of resources and environmental pollution have become more prominent. The key factors for solving energy problems are to increase energy utilization efficiency and optimize energy structure. The development of new materials is the research emphasis in the field of material chemistry all the time. For instance, developing new light-capture materials and catalysts to improve the efficiency of existing photovoltaic cells is one of the most effective approaches to increasing solar power capacity radically. The design of high-performance catalytic materials to make better use of energy from fossil fuels and biomass. In addition, it is an important research direction of material chemistry and energy chemistry to deeply understand the reaction mechanism of energy conversion.

Molecularly Engineered Interfaces in Metal Halide Perovskite Solar Cells

Perovskite solar cells (PSCs) have emerged as a promising candidate for next-generation thin-film photovoltaic technology owing to their excellent optoelectronic properties and cost-effectiveness. To gain the full potential of device performance, an in-depth understanding of the surface/interface science is an urgent need. Here, we present a review of molecularly engineered studies on interface modifications of PSCs. We elaborate a systematic classification of the existing optimization techniques employed in molecularly engineered perovskite and interface materials and analyze the insights underlying the reliability issues and functional behaviors. The achievements allow us to highlight the crucial strengths of molecular design for further tailoring of the interfacial properties, mitigating the nonradiative losses, optimizing the device performance, and retarding the degradation process of PSCs. Finally, the remaining challenges and potential development directions of molecularly engineered interfaces for high-performance and stable PSCs are also proposed.

Benzo[1,2-b:4,5-b']difuran Polymer-Based Non-Fullerene Organic Solar Cells: The Roles of Non-Fullerene Acceptors and Molybdenum Oxide on Their Ambient Stabilities and Processabilities

The ambient stability and processability of organic solar cells (OSCs) are important factors for their commercialization. Herein, we selected four benzo[1,2-b:4,5-b']difuran (BDF) polymers and two electron acceptors to examine the role of photovoltaic materials in the ambient stability. The investigations revealed that the MoO_x layer is the detrimental factor for the ambient stabilities. The penetration of MoO_x into the active layer and their interactions will strengthen the interface and form a favorable contact, hence leading to the increased photovoltaic performance, in which the efficiency loss induced by air was balanced out. As such, these BDF polymer-based non-fullerene (NF) OSCs possessed very promising ambient stabilities even after ∼1000 h with the almost maintained power conversion efficiencies (PCEs). These results drive us to further investigate the ambient processability of these NF-OSCs. The PCEs from the devices processed under ambient condition only possessed 0.3-2% loss compared to those devices under inert conditions, which suggest the significant potentials of BDF polymers to develop highly efficient and stable NF-OSCs for the practical applications.

Hysteretic Ion Migration and Remanent Field in Metal Halide Perovskites

The gap in understanding how underlying chemical dynamics impact the functionality of metal halide perovskites (MHPs) leads to the controversy about the origin of many phenomena associated with ion migration in MHPs. In particular, the debate regarding the impact of ion migration on current-voltage (I-V) hysteresis of MHPs devices has lasted for many years, where the difficulty lies in directly uncovering the chemical dynamics, as well as identifying and separating the impact of specific ions. In this work, using a newly developed time-resolved time-of-flight secondary ion mass spectrometry CH3NH3 + and I- migrations in CH3NH3PbI3 are directly observed, revealing hysteretic CH3NH3 + and I- migrations. Additionally, hysteretic CH3NH3 + migration is illumination-dependent. Correlating these results with the I-V characterization, this work uncovers that CH3NH3 + redistribution can induce a remanent field leading to a spontaneous current in the device. It unveils that the CH3NH3 + migration is responsible for the illumination-associated I-V hysteresis in MHPs. Hysteretic ion migration has not been uncovered and the contribution of any ions (e.g., CH3NH3 +) has not been specified before. Such insightful and detailed information has up to now been missing, which is critical to improving MHPs photovoltaic performance and developing MHPs-based memristors and synaptic devices.

Functionalized Amphiphilic Diblock Fullerene Derivatives as a Cathode Buffer Layer for Efficient Inverted Organic Solar Cells

The amphipathic interface layer sandwiched between cathode and active layers had always played a role to balance interface compatibility and interfacial energy barriers in inverted organic solar cell (OSC) devices. Two functionalized amphiphilic diblock fullerene derivatives named C60-2DPE and C60-4HTPB were synthesized and applied as an interface layer in modifying zinc oxide (ZnO). Based on their amphipathic characteristics, the solvent treatment was introduced to cause an obvious self-assembly of the two materials on ZnO. The introduced cathode buffer layer could improve the interface compatibility between ZnO and the organic active layer effectively with its amphipathic blocks. Based on the PTB7-Th:PC71BM system, the OSC devices with a functionalized fullerene derivative layer could reach a power conversion efficiency of 9.21 and 8.86% for C60-2DPE and C60-4HTPB , respectively.

Simple-Structured NIR-Absorbing Small-Molecule Acceptors with a Thiazolothiazole Core: Multiple Noncovalent Conformational Locks and D-A Effect for Efficient OSCs

Developing simple-structured and efficient near-infrared (NIR) absorbing small-molecule acceptors (SMAs) remains of great importance for commercial applications in organic solar cells (OSCs). Herein, we construct two novel thiazolothiazole-centered NIR-absorbing SMAs by alkoxy/alkylthio side chains (TTz3/TTz4) and multiple noncovalent conformational locks of S···N, S···O, and S···S. These conformational locks make both simple-structured SMAs exhibit an extended planar configuration and a red-shifted NIR absorption in comparison with the SMA with an alkyl side chain (TTz1). As expected, both SMAs show high-efficiency photovoltaic performance in the solution-processing OSCs using J71 as a donor. A higher power conversion efficiency of 8.76% with a low energy loss (0.57 eV) is obtained in the TTz3-based OSCs. It is the first report on the simple-structured and efficient NIR-absorbing SMAs, which have great potential applied in the semitransparent OSCs.

Enhanced Near-Infrared Photoresponse of Inverted Perovskite Solar Cells Through Rational Design of Bulk-Heterojunction Electron-Transporting Layers

How to extend the photoresponse of perovskite solar cells (PVSCs) to the region of near-infrared (NIR)/infrared light has become an appealing research subject in this field since it can better harness the solar irradiation. Herein, the typical fullerene electron-transporting layer (ETL) of an inverted PVSC is systematically engineered to enhance device's NIR photoresponse. A low bandgap nonfullerene acceptor (NFA) is incorporated into the fullerene ETL aiming to intercept the NIR light passing through the device. However, despite forming type II charge transfer with fullerene, the blended NFA cannot enhance the device's NIR photoresponse, as limited by the poor dissociation of photoexciton induced by NIR light. Fortunately, it can be addressed by adding a p-type polymer. The ternary bulk-heterojunction (BHJ) ETL is demonstrated to effectively enhance the device's NIR photoresponse due to the better cascade-energy-level alignment and increased hole mobility. By further optimizing the morphology of such a BHJ ETL, the derived PVSC is finally demonstrated to possess a 40% external quantum efficiency at 800 nm with photoresponse extended to the NIR region (to 950 nm), contributing ≈9% of the overall photocurrent. This study unveils an effective and simple approach for enhancing the NIR photoresponse of inverted PVSCs.